samsung galaxy 3 mini fails to write firmware on sm-g730v - Galaxy S III Mini Q&A, Help & Troubleshooting

Hello everyone,
I tried installing my devices firmware from the samobile site, after having it boot loop. I got it into download mode, connected it to my pc running odin, and tried flashing the firmware. It got as far as loading the recovery, then tried the rest but failed in the end, saying flash write failed or something like that. Would a custom firmware work better? It seems there are tools for other versions of the s3 mini, but not mine, so I'm not sure of the next step.
Thanks in advance,
Nick

You could try using kies to flash the firmware and there is safestrap(twrp) available for the g730v. If kies doesn't work make sure you are following the steps to flash the odin firmware correctly.
Sent from my Google Nexus 5 using XDA Labs

turnert said:
You could try using kies to flash the firmware and there is safestrap(twrp) available for the g730v. If kies doesn't work make sure you are following the steps to flash the odin firmware correctly.
Sent from my Google Nexus 5 using XDA Labs
Click to expand...
Click to collapse
I believe I followed the directions correctly for odin, and the kies software should have worked since my phone had an error message that it couldn't see the phone. I tried installing twrp, didn't take. I tried finding the correct safestrap file, but the only one close was for the s3 and the person said it was too big for their screen.
I appreciate your help, and any more would be much appreciated.

startreksuite said:
I believe I followed the directions correctly for odin, and the kies software should have worked since my phone had an error message that it couldn't see the phone. I tried installing twrp, didn't take. I tried finding the correct safestrap file, but the only one close was for the s3 and the person said it was too big for their screen.
I appreciate your help, and any more would be much appreciated.
Click to expand...
Click to collapse
Maybe you downloaded some bad firmware, where did you get your odin package from?
I would recommend downloading this for odin.
https://www.androidfilehost.com/?fid=817550096634742565
also here is a link to safestrap for when you unbrick your phone.
https://forum.xda-developers.com/ga.../recovery-locked-verizon-s3-mini-ne2-t3361624

So the different firmware didn't work. I went so far as to uninstall kies software, used odin 3.07, 3.09, and the latest one with my the same issue. I even used a different cord. I guess the next step is to hook up my phone to my computer using ADB and see if it's stuck in write only mode.
Sent from my KFGIWI using Tapatalk

Related

Using Android 4.0.3, trying to revert back to previous (2.3.6)

Hello,
I have a problem where with downgrading, it just bricks my phone. Can somebody step-by-step (and maybe help with links) post how to fix my phone? I'm considering just getting an iPhone now... I'm mostly fed-up with Android.
Captivate sig link/ Mikes safe kf1/ 3 file odin
^Go on the link that he posted. And dude don't get an Iphone, you're going to regret it! Trust me!
U have to do a two step flash. Flash a miui/cm7 rom..then get back to recovery using three button combo and flash rhe miui/cm7 rom
Sent from my I897 in the LION filled territory called Kenya using XDA App
Second problem,
I tried to do a flash of the newest Cyanogen update (7.10) from the stock Odin, which worked quite well, and it didn't complete. Odin then decided to crash. After that, my phone is now stuck in "Firmware Upgrade Fail! Try using recovery mode". I can't get into Download mode, and I can't get into recovery mode. Any ideas?
I saw on the Rogers website that an iPhone 4 (8gb) is $0 on a 3 year contract
Use that screen as dl mode.
mrhaley30705 said:
Use that screen as dl mode.
Click to expand...
Click to collapse
Tried that, and it didn't show up in Odin...
EDIT: When I try to use Heimdall, it says that it passes in the Heimdall frontend, but when I look at my phone on the screen, the progress bar never finishes. It just stops at about 90% (estimated)...
If you've installed Heimdall drivers, you will need reinstall Samsung drivers to get Odin to work.
mrhaley30705 said:
If you've installed Heimdall drivers, you will need reinstall Samsung drivers to get Odin to work.
Click to expand...
Click to collapse
Thanks! I'll try that as soon as it finishes installing. What would the way to install the new Cyanogen mod without bricking my phone be?
After flashing to stock, follow the install instructions in the first post of the CM thread. If you have questions about the installation, ask in the q&a thread for that rom (it's stickied in the q&a sub forum)
Downgrade to android 3.0 or 3.2
I have the same issue but i'm using samsung glaxy tab 10.1 and i want to downgrade to android 3.0 or 3.2, i'm on android 4.0.3 ICS, i used CM9 to root my tablet. I would be very thankful with any help!!

[Q] Stuck On This For Awhile Now... :(

I have a ATT S4 Active SGH-I537. It can only access download mode and from there i've tried everything. What happened was the phone had a OTA to the newest update pushed from ATT and after it updated the touchscreen did not work and i noticed the scren was "burning in the text" if that's what it's called. So i tried to wipe cache, and factory reset. Same thing Happened. Well now the firmware update did not go through so i have the error and can only access download mode. I've tried everything in odin and just get FAILS. Blahhh.
Any help would be great, I'm not new to this kind of stuff. I'm just stuck and need some help.
Thanks
KHarper2015 said:
I have a ATT S4 Active SGH-I537. It can only access download mode and from there i've tried everything. What happened was the phone had a OTA to the newest update pushed from ATT and after it updated the touchscreen did not work and i noticed the scren was "burning in the text" if that's what it's called. So i tried to wipe cache, and factory reset. Same thing Happened. Well now the firmware update did not go through so i have the error and can only access download mode. I've tried everything in odin and just get FAILS. Blahhh.
Any help would be great, I'm not new to this kind of stuff. I'm just stuck and need some help.
Thanks
Click to expand...
Click to collapse
As long as you can get into Download mode you should be ok. I don't know what firmware you were originally on and what you were updating to, but to be safe you should flash the NE3 Odin package. Download it from the i537 Firmware Thread and flash it through Odin. Check the md5 of the file you downloaded with the md5 posted in the thread to make sure you don't have a corrupted download. If you need step-by-step instructions for Odin you can find a link to it in the same thread.
Make sure you are using the usb cable that came with your phone since that is the only one that is guaranteed to work. You can use others, but Odin is very picky about usb cables. Also, try different usb ports on your computer, again Odin is picky. Finally try Odin v3.07 and Odin v3.09. Most people have used those versions to flash things.
If you need more help I'm going to need a little more information:
What firmware were you on before the OTA?
What firmware are you trying to update to?
You mentioned Odin doesn't work, can you post the Odin logs so I can see where it fails?
Devo7v said:
As long as you can get into Download mode you should be ok. I don't know what firmware you were originally on and what you were updating to, but to be safe you should flash the NE3 Odin package. Download it from the i537 Firmware Thread and flash it through Odin. Check the md5 of the file you downloaded with the md5 posted in the thread to make sure you don't have a corrupted download. If you need step-by-step instructions for Odin you can find a link to it in the same thread.
Make sure you are using the usb cable that came with your phone since that is the only one that is guaranteed to work. You can use others, but Odin is very picky about usb cables. Also, try different usb ports on your computer, again Odin is picky. Finally try Odin v3.07 and Odin v3.09. Most people have used those versions to flash things.
If you need more help I'm going to need a little more information:
What firmware were you on before the OTA?
What firmware are you trying to update to?
You mentioned Odin doesn't work, can you post the Odin logs so I can see where it fails?
Click to expand...
Click to collapse
I will try the NE3 Package a few times, maybe stop by the store and get a different cable. If that doesn't work i will let you know. Thanks for replying and for the info. This is a frustrating mess.

Need help flashing Dok2

Can someone help me out here? I am suffering from the major lagging and freezing with my Note 4 and i contacted Samsung about it. They told me to visit a local Samsung store and they can check out my phone, but i want to be back to stock before taking it in. Last night I tried to Odin back to stock Dok2 for roughly 4 hours and i couldnt get it accomplished. Am i missing something? I tried 3 different versions of Odin and downloaded 2 diffrent copies of the Dok2 firmware, but still no luck. Is there a specific processto follow? I tried factory resetting the phone before odin flashing, I even clean wiped the phone in Odin deleting internal storage as well.
Please help!
Anyone??????
Did you download Odin and DOK2 from sammobile? I was able to flash my phone with the downloads from there. I would double check and make sure you are using the stock samsung USB cable that came with your phone.
I'm having the exact same freezing and lockup issues as you are, by the way.
I dont beleive my odin and firmware came from sammobile, so i will give that a shot. I did make sure to use the samsung usb cable. I guess i need to make sure it was my usb cable and not my wife's S4 cable. Not sure if that makes a difference.
Ok. I still can't odin flash Dok2. I downloaded the new version on Odin from Sammobile and downloaded a copy od Dok2 (full) from a link to Mega. I couldn't get the sammobile link to work.
Any other suggestions?
It's possible that your DOK2 file might be corrupted or something. Try giving this one a shot, http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 to download the firmware. Input your phone model, set region to TMB, place check mark on "auto" box, and place a check mark on the "decrypt automatically" box. Click on "Check Update" and download. Don't worry about the .enc4 extension on the file name, once its done downloading and decrypting you will get a .zip file of the firmware.
I tried downloading the SamFirm program from the link you provided above, but I get an error in the program stating: "Could not load file or assembly "Microsoft.WindowsAPICodePack.Shell. Version= 1.10.0. Maybe this is because I am running Windows 10.
OK, problem solved. I downloaded Kies 3 and was able to restore to DOK2 using it.
Gjohnson7771 said:
OK, problem solved. I downloaded Kies 3 and was able to restore to DOK2 using it.
Click to expand...
Click to collapse
Can you elaborate on this Kies 3, I'm stuck I the same issue and I cant get back to Stock ROM for Note 4
Sure. Kies 3 is the Samsung software for recovery and updates. You should be able to just Google Kies 3 and download.
Gjohnson7771 said:
Sure. Kies 3 is the Samsung software for recovery and updates. You should be able to just Google Kies 3 and download.
Click to expand...
Click to collapse
So use Kies 3 as opposed to using Odin to flash the fw?
That's the only way I was able to flash Dok2 again. I tried at least 20 times in Odin and it failed everytime. I'm still having issues on Dok2, I wish I could flash back to Cod6.

Problems with marshmallow update. Emergency recovery

Hello all. I'm having some trouble getting my note 5 to work again. I downloaded the new Marshmallow update today from sammobile and proceeded to flash it with odin. After 10 seconds I got the fail red box in odin, disconnected my phone and got this error: '' an error has occured while updating the device software. Use the emergency recovery function in the smart switch pc software''.
So I went ahead and read in a couple of forums and saw that people got their phones working back using Kies. I did that. Entered my model number (sm-n920g) and entered the serial number. Kies then started to download the firmware and the recovery failed. I have no idea what to do really. Should I try using the Smart Switch program instead? Flashing a lollipop one via odin? Or what? I've never had any trouble before flashing stock roms or customs on any of my other phones, so I'm getting a bit frustrated after Kies didn't work. Any recommendations would be gladly appreciated!
I would personally go back and flash the stock lollipop firmware and double check that the marshmallow update you are using is not corrupted. Also, make sure to use twrp 3.0.1 as a recovery. I was having boot loops at first until I discovered the correct recovery file.
Keep us posted
Sent from my SM-N920P using Tapatalk
jeffpom09 said:
I would personally go back and flash the stock lollipop firmware and double check that the marshmallow update you are using is not corrupted. Also, make sure to use twrp 3.0.1 as a recovery. I was having boot loops at first until I discovered the correct recovery file.
Keep us posted
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
Thanks for your fast response. I will try and flash the lollipop one via Odin. Hope it works.
budowski said:
Thanks for your fast response. I will try and flash the lollipop one via Odin. Hope it works.
Click to expand...
Click to collapse
Well the lollipop stock rom failed too. I'm getting an error in the download mode that says SW REV CHECK FAIL. Don't know what it means or how to fix it, but I'm currently not able to flash anything. What can I do??
budowski said:
Well the lollipop stock rom failed too. I'm getting an error in the download mode that says SW REV CHECK FAIL. Don't know what it means or how to fix it, but I'm currently not able to flash anything. What can I do??
Click to expand...
Click to collapse
Please make sure the download is not corrupted or ensure you are using the correct firmware file.
Sent from my SM-G935F using Tapatalk
Before i flashed the mm rom i flashed the modem and bootloader and twrp with odin.

Wiped EVERYTHING (I MEAN EVERYTHING)

My cousin thought it would be a good idea to wipe his phone via TWRP. However in doing so he wiped the entire phone ROM and all. I downloaded the latest stock rom, tried to flash via Oden and was unsuccessful. The only information I was getting is FAILED. I'm not sure if I need to download and install drivers on the phone first or if it's just bricked for good. Any help would be grateful. I'm familiar with Oden and rooting, however I've never come across something like this.
Thank you.
psb1079 said:
My cousin thought it would be a good idea to wipe his phone via TWRP. However in doing so he wiped the entire phone ROM and all. I downloaded the latest stock rom, tried to flash via Oden and was unsuccessful. The only information I was getting is FAILED. I'm not sure if I need to download and install drivers on the phone first or if it's just bricked for good. Any help would be grateful. I'm familiar with Oden and rooting, however I've never come across something like this.
Thank you.
Click to expand...
Click to collapse
Question #1
If he has TWRP installed, does he have a backup you can restore? If not...
Why not flash a custom Rom from the Android Development forums for this specific device?
But back to your Odin error...
When you connect the device to your PC while Odin is open and your device is in "Download" mode, does Odin show the words "Added in the dialog window?
If Odin shows "Added then the drivers are installed into the PC and your PC and Odin are recognizing the device.
Make sure you click on "options" in Odin and un-select "Auto-Reboot".
What does Odin say at the bottom of the dialog window after you hit the Start button and the installation fails?
Sent from my SM-G955U using XDA-Developers Legacy app
He has no backup saved to restore. I'm not sure why I've not tried a custom rom, I'll see if that does the trick. When I connect the phone to the computer it does say Added in the dialog box and I have Auto Reboot un-selected.
psb1079 said:
He has no backup saved to restore. I'm not sure why I've not tried a custom rom, I'll see if that does the trick. When I connect the phone to the computer it does say Added in the dialog box and I have Auto Reboot un-selected.
Click to expand...
Click to collapse
If Odin has failed with all things looking normal, are you sure you have the exact, matching stock firmware for the device?
Odin can do funky things sometimes. Also, what version of Odin are you using? I would suggest downloading a new version of Odin and verify you have downloaded the correct firmware for the device with the correct region.
Which device are we talking about again? It's a T-Mobile Galaxy S6, correct?
Sent from my Samsung SM-G955U using XDA Labs
Seems the first stock rom I downloaded even though it matched MD5 was faulty. I downloaded the stock rom again from a different source and was able to install everything perfectly. Thanks for the help everyone. Now I'm off to find a way to unlock.

Categories

Resources