I was very excited to install this update that released today, but after installing it, I can't sign in to my phone. When it boots up, it flashes the homescreen wallpaper, not the lockscreen wallpaper for a second or two then the screen turns black. If I hold the power button I can view the power settings (reboot, silent, airplane mode, shut down) and also if I double press the power button, which my camera shortcut, it opens the camera. Aside from these actions, I can't do anything.
My method to installing this rom was this:
Download the rom from xiaomi.eu website
use the built in updater where I select a rom on my phone and it automatically boots to recovery for me (I'm using TWRP)
Let it do its thing, and boot up, then when it boots the errors occur.
I tried wiping cache and dalvik, but no change.
Did I miss something? Is there something I should have done differently when updating my phone? Is there a special procedure in upgrading Android versions? (1.1.2.0 is first Android Pie version on my phone)
Thank you very much.
Edit 1: I have flashed a second time, this time flashing cache, dalvik, and data. I was able to get into MIUI and set up my device, but after I rebooted the phone for a separate reason, I am experiencing the same errors as before.
Edit 2: Not 100% sure because I switched ROMs, but I probably could have gotten it working by wiping /system as well.
Hello, same thing here.
Clean install and same problem... very sad
DaniloFerracini said:
Hello, same thing here.
Clean install and same problem... very sad
Click to expand...
Click to collapse
Yep same here. I tried it again, wiping data partition and same issue. Can't downgrade because rollback protection too. I guess I'll try out Pixel Experience??
DaniloFerracini said:
Hello, same thing here.
Clean install and same problem... very sad
Click to expand...
Click to collapse
Hey, by the way, what launcher are you using? This seems to be a problem with just the lock screen so maybe there is a weird interaction happening between the launcher and the lock screen. I was using Rootless Pixel Launcher.
Edit: one more question: did you do the same thing as me where I first flashed without formatting data, then you flashed a second time, that time formatting the data? I'm thinking it could also be just because we flashed it incorrectly the first time, future flashes are gonna be messed up.
Where's the download I can find only 10.1.1.0
AquaticPossum said:
Hey, by the way, what launcher are you using? This seems to be a problem with just the lock screen so maybe there is a weird interaction happening between the launcher and the lock screen. I was using Rootless Pixel Launcher.
Edit: one more question: did you do the same thing as me where I first flashed without formatting data, then you flashed a second time, that time formatting the data? I'm thinking it could also be just because we flashed it incorrectly the first time, future flashes are gonna be messed up.
Click to expand...
Click to collapse
I make a dirty flash and clean flash, nova launcher and stock launcher, both dont work
kekkojoker90 said:
Where's the download I can find only 10.1.1.0
Click to expand...
Click to collapse
https://sourceforge.net/projects/xi...ulti_MI8_V10.1.2.0.PEACNFI_v10-9.zip/download
DaniloFerracini said:
Hello, same thing here.
Clean install and same problem... very sad
Click to expand...
Click to collapse
Try this : https://forum.xda-developers.com/android/software-hacking/remove-lockscreen-recovery-t3530008
You must have a valid custom recovery
Edit : the recovery method won't work... It's a problem with the rom. Just switch to another version....
https://xiaomi.eu/community/threads/miui-10-0-10-1-stable-release.47170/page-23 see the last posts about that
my phone also dead after install the last pie my phone stuck on a black screen
tried downgrading the miui to oreo and the phone did not work well the phone reboot after 30 sec
and after that happened I backed to pie version again but the same problem stuck on a black screen I don't want to lose my data what can I do?
there is possible to back the oreo version and restore that data from twrp backup? the apps work well or not?
almog250 said:
my phone also dead after install the last pie my phone stuck on a black screen
tried downgrading the miui to oreo and the phone did not work well the phone reboot after 30 sec
and after that happened I backed to pie version again but the same problem stuck on a black screen I don't want to lose my data what can I do?
there is possible to back the oreo version and restore that data from twrp backup? the apps work well or not?
Click to expand...
Click to collapse
You shouldn't downgrade :/
kekkojoker90 said:
You shouldn't downgrade :/
Click to expand...
Click to collapse
Even with xiaomi.eu rom ?
Otarie004 said:
Even with xiaomi.eu rom ?
Click to expand...
Click to collapse
You can downgrade from Pie to Oreo with EU rom and TWRP, the phone boot up normaly but some processes say stop working.
I had same problem yesterday. I recommend wipe system before reinstalling Oreo rom and waiting a fixed Pie rom
kekkojoker90 said:
Where's the download I can find only 10.1.1.0
Click to expand...
Click to collapse
This is the Xiaomi.eu ROM which is based on China Stable.
AquaticPossum said:
I was very excited to install this update that released today, but after installing it, I can't sign in to my phone. When it boots up, it flashes the homescreen wallpaper, not the lockscreen wallpaper for a second or two then the screen turns black. If I hold the power button I can view the power settings (reboot, silent, airplane mode, shut down) and also if I double press the power button, which my camera shortcut, it opens the camera. Aside from these actions, I can't do anything.
My method to installing this rom was this:
Download the rom from xiaomi.eu website
use the built in updater where I select a rom on my phone and it automatically boots to recovery for me (I'm using TWRP)
Let it do its thing, and boot up, then when it boots the errors occur.
I tried wiping cache and dalvik, but no change.
Did I miss something? Is there something I should have done differently when updating my phone? Is there a special procedure in upgrading Android versions? (1.1.2.0 is first Android Pie version on my phone)
Thank you very much.
Edit 1: I have flashed a second time, this time flashing cache, dalvik, and data. I was able to get into MIUI and set up my device, but after I rebooted the phone for a separate reason, I am experiencing the same errors as before.
Click to expand...
Click to collapse
This stable ver has many problems. It's hasnt stable yet. Even when you could turn the screen on, if you use the 3 buttons as default, everything is normal, but if you use fullscreen gestures and reboot your phone, you will stuck in black screen again. Many friends and me have the same black screen problems. So my advice is you should stay where you are waiting for a real "stable" ver.
For all who want to use FSG in version 10.1.2.0 I would recommend the following workaround:
a) Startup freshly installed system
b) Select navigation bar as preferred method and finish setting up the phone
c) Download Magisk v18.0
d) Reboot into TWRP and flash Magisk v18.0 zip
e) Reboot to system
f) Download the free application "Fluid Navigation Gestures" and setup the same Gestures as in Stock mi8
g)Optional: In Fluid NG, choose "Hide Navigation Bar"
It doesn't have the exact same feeling as stock but is pretty close and I think it's valid as a meantime workaround.
Hello guys, decide to mount this tutorial because I still see a lot of people with doubts, yes we already have how to root our device
I did it on mine and it worked, do it at your own risk, neither I nor anyone else on the forum is responsible for any loss
A tutorials too complex for some users, teaching you how to create your own Magisk modified Img boot, but I like simplicity, so if you don't want to break your head too much, here's a tip, use a successfully modified img boot , what you need is to install the rom stock that was used to create the modified boot first.
let's go to the tutorial, warning that the files posted here are not my own, and if it doesn't work, check if you're not commenting on any flaws, don't try to memorize the tutorial, follow it step by step. come on!:dedos cruzados:
1 - first follow these steps to unlock the bootloader:
This is a basic step to root device. Go to settings - about phone - Software Information - tap multiple times on "Build number" - This will open developer option.
Now in settings at the end, you will have new option "Developer options" - look for OEM unlocking - Enable it.
(PS : If you don't see this option then you may need to wait up to 7 days or more to appear or may be on some operator you will get it never. Without this option you can not root your device, sorry!)
Once you have enable OEM unlock option, switch off your device and reboot to download mode.
To put device in download mode - Press Volume Up & then Press Volume Down (Keep holding both) and connect device to PC with USB cable
When device start to download mode,long press volume up to unlock the bootloader. This will wipe your data and automatically reboot
Now let finish setup and again enable developer options (as said above), and confirm that the OEM unlocking option exists and grayed out!
If it is not then you can not root device!
Once you see this option and greyed out, you are ready to flash custom binary and root your device.
Now let's go to the next step, reinstall an outdated system, I did it on mine and it worked, do it at your own risk, neither I nor anyone else on the forum is responsible for any loss
2 - installing the stock ROM that we will use:
download this rom: https://samfrew.com/ru/download/Gal..._Wi-Fi-__/rue3/KOO/T290KSU3BUE1/T290KOO3BUE2/
OBS: a little detail about this firmware, it is made in arm32, which apparently makes it "lighter", but also has a more acidic use of RAM memory. This was the last software I installed on tab A, and I can say that the use has become better with it, but if you want to stay in the stock rom, even custom gsi didn't get such a good performance. It's worth testing, but be aware of the risks, I'm not responsible for errors.
Updating: use a modified version of Odin, to do the installations, be careful with downgrades, I managed, I was in the most current version of March, and I managed anyway using this modified Odin, but do it at your own risk, download the most current version here:
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
And install via Odin, if you need more details just a Google, there are already millions of tutorials for that lol
when you get here you should already be aware that you have lost all your data, but it is necessary that the OEM option is enabled in the options, so in the CSC session use Home CSC, so that you leave the data saved, and do not lose the initial settings : )
once with successful installation, we will now install the file modified by magisk
3 - magisk Installation:
Intall TWRP: https://forum.xda-developers.com/t/...-2-for-2019-galaxy-tab-a-8-0-sm-t290.4185235/
just follow our friend's tutorial, with a little observation, after starting the process in odin, be sure to hold the volume up button + turn on, to be redirected to the TWRP.
follow the standard steps to install magisk, if it doesn't work, you will have to manually modify the system boot.img along with magisk maneger.
if case of problem:
The process of entering recovery on the SM-T290 using buttons is really finicky, unlike the 10.1" version. My best result has been with holding Power + Vol Up on startup, quickly switching to hit Power to dismiss the bootloader unlock warning page, and then immediately holding Power + Vol Up again for 6 seconds. (Holding longer will cause a hard reset.)
If you miss on the first attempt and haven't installed Multidisabler, it will revert your custom recovery to the stock OEM recovery.
I haven't had the tablet in my hands for a few months, so unfortunately I can't help more than that, as I said this was the last system I used, just because GSI are not very functional and are not always light, sometimes they crash more and it has more annoying bugs to fix that discourage daily use. my tip is, stay in stock Koo, excuses for those who can't, the most I can do now is guide them.
As a gift for you, I will teach you how to use Xposed :3
remembering, I did several tests that several times I faced bootlooops but in the end it worked for me, so notice, do it at your own risk.
5 - How to install end use EDexposed with Magisk
these versions were the ones that worked without problems in this rom
Install Riru - (Riru core) V21.0
Install Riru - Edxposed v 0.4.6.1(4510) YAHFA
Reboot, after reboot, install Edxposed Manager
and you can be happy
I thank you all for your help, and remembering that this was just a compilation of tips, to facilitate everyone, take due care to avoid problems, and don't forget to thank: 3 ?
Has anyone attempted this yet?
I am attempting to apply this root and I have run into a minor issue.
The AP Patched file from magisk isn't compressed correctly. Maybe I don't understand, but using 7zip, i can see that all the compressed files inside the AP file are LZ4's, but after patching with magisk, some become .IMG and odin errors our whenever I hit modem.Bin.
Any Ideas?
EngineeNerd said:
I am attempting to apply this root and I have run into a minor issue.
The AP Patched file from magisk isn't compressed correctly. Maybe I don't understand, but using 7zip, i can see that all the compressed files inside the AP file are LZ4's, but after patching with magisk, some become .IMG and odin errors our whenever I hit modem.Bin.
Any Ideas?
Click to expand...
Click to collapse
is the topic dead
EngineeNerd said:
is the topic dead
Click to expand...
Click to collapse
Hi friend, sorry but there are more current ways of routing, even already working on a TWRP, but now you can do the following, try using the same Firmware in the same version of the bootloader, otherwise there will always be an error, the file compressed this modified to work with Odin, I tested it myself on my T290, but I cannot guarantee its effectiveness if I try to use it in another version, I do not recommend doing this even.
I had trouble unlocking the bootloader until I did this:
After enabling OEM unlocking and turning the device off, plug in the USB cable. Hold both Vol + and Vol - at the same time, then unplug and replug the USB cable. The bootloader unlock screen should come up.
I posted this on twrp thread, but seems no one wants to answer , thought give it a try here?
Anyone know of a fix for the blank screen?
Not sure why they would lock down this tablet but not others?
Whats the point of unblocking the bootloader if you can not do custom roms , root etc?
My firmware is on T290XXU3BUC1
I can successfully installed twrp via Odin.
I reboot, instantly blank screen. I have rebooted into twrp with blank screen.
I was able to install the nexus rom, with adb twrp command line and works but all is blank screen.
I go back to stock and the display is back.
I have tried another twrp on this forum but that gives me security error.
I have also tried to patch ap tar with Magiskt but that flashes but when restart get security error.
Twrp is the only thing that works but complete blank screen with back light.
Tab is unlocked bootloader and oem unlocking on.
does this work if you're on a11?
themace51 said:
I posted this on twrp thread, but seems no one wants to answer , thought give it a try here?
Anyone know of a fix for the blank screen?
Not sure why they would lock down this tablet but not others?
Whats the point of unblocking the bootloader if you can not do custom roms , root etc?
My firmware is on T290XXU3BUC1
I can successfully installed twrp via Odin.
I reboot, instantly blank screen. I have rebooted into twrp with blank screen.
I was able to install the nexus rom, with adb twrp command line and works but all is blank screen.
I go back to stock and the display is back.
I have tried another twrp on this forum but that gives me security error.
I have also tried to patch ap tar with Magiskt but that flashes but when restart get security error.
Twrp is the only thing that works but complete blank screen with back light.
Tab is unlocked bootloader and oem unlocking o
Click to expand...
Click to collapse
themace51 said:
I posted this on twrp thread, but seems no one wants to answer , thought give it a try here?
Anyone know of a fix for the blank screen?
Not sure why they would lock down this tablet but not others?
Whats the point of unblocking the bootloader if you can not do custom roms , root etc?
My firmware is on T290XXU3BUC1
I can successfully installed twrp via Odin.
I reboot, instantly blank screen. I have rebooted into twrp with blank screen.
I was able to install the nexus rom, with adb twrp command line and works but all is blank screen.
I go back to stock and the display is back.
I have tried another twrp on this forum but that gives me security error.
I have also tried to patch ap tar with Magiskt but that flashes but when restart get security error.
Twrp is the only thing that works but complete blank screen with back light.
Tab is unlocked bootloader and oem unlocking on.
Click to expand...
Click to collapse
what are you specifically asking? the TWRP here is very functional, but custom roms are not very stable for this tablet, some GSI behave well, but it's still better to stock debloated
WillisD said:
isso funciona se você estiver em a11?
Click to expand...
Click to collapse
I do not think so
Hi, maybe you can help me.
i rooted my SM-T290 MXO with Android 10 but the system always asked me about a new patch update (May 1 Update) and i dont know how to apply updates so i downladed the firmware update via ODIN, long story short after applying the firmware and updating trough Smart Switch (because now my tablet say that the SO has been modified and now i can´t update trought OTA) and now i have Android 11 with One 3.1 so my questions are:
Can install TWRP like before in his version of Android?
In case i need to downgrade to Android 9, do i need to be the exact carrier (XAR = United States) in the file you put or should i use my carrier (MXO = Mexico) and is the same result?
I hope anyone can help me because i dont know much about rooting and is the second time im dealing with rooting a Samsung Device (My first attempt was a Galaxy 4 and was frustrating that KNOX detected my bad root)
Thanks in Advance.
MythoAegis said:
Hi, maybe you can help me.
i rooted my SM-T290 MXO with Android 10 but the system always asked me about a new patch update (May 1 Update) and i dont know how to apply updates so i downladed the firmware update via ODIN, long story short after applying the firmware and updating trough Smart Switch (because now my tablet say that the SO has been modified and now i can´t update trought OTA) and now i have Android 11 with One 3.1 so my questions are:
Can install TWRP like before in his version of Android?
In case i need to downgrade to Android 9, do i need to be the exact carrier (XAR = United States) in the file you put or should i use my carrier (MXO = Mexico) and is the same result?
I hope anyone can help me because i dont know much about rooting and is the second time im dealing with rooting a Samsung Device (My first attempt was a Galaxy 4 and was frustrating that KNOX detected my bad root)
Thanks in Advance.
Click to expand...
Click to collapse
yes, you can go back to previous versions, but it gets harder when you upgrade bootloader version.
In order not to crash the downgrade, you need to look for the latest Android version you want, from your region you are in now.
An example:
I'm on the latest version ZTO - Brazil - Android 11
to get back to Android 10 I need to download the latest ZTO version with Android 9, of course you can try between different regions, but it will be a little more complicated.
Hello
I was asking, how do i root this thing lol, it has been a nightmare
I can not root with custom magisk patched rom, as get boot error, and i can install Twrp, which works, but i just get a blank screen.
Was wondering if there was a work around?
themace51 said:
Hello
I was asking, how do i root this thing lol, it has been a nightmare
I can not root with custom magisk patched rom, as get boot error, and i can install Twrp, which works, but i just get a blank screen.
Was wondering if there was a work around?
Click to expand...
Click to collapse
You mentioned it's on Android 11, didn't you?!
well, I don't have Tab A with me anymore, but the suggestion I give you is to try to go back to Android 10, then install TWRP, and then try to install magisk, I can give you the last firmware I installed,
currently he is with my brother.
The firmware is Koreano, as I said, it is 32bits, and super functional.
Samsung SM-T290/T295 Galaxy Tab A 8.0 (2019) - Прошивки - 4PDA
Samsung SM-T290/T295 Galaxy Tab A 8.0 (2019) - Прошивки
4pda.to
take a look here, search for the firmware I told you about, very good by the way
Hey
I am on T290XXU3BUC1 and i do not understand the language on the link you post
I tried your tutorial , but i am getting
sw rev check fail [aboot] Fused 3 > binary 3
hello, about that, but lately I don't have much time, but I'll update it today if I can, you probably got this error because this firmware is old.on 4pda there is a newer version with root, remembering that currently you can root through twrp, I'm going to port my last attempts here, but I notice that I don't have the tablet in my hands. use translation tools, the site is in Russian
I updated the guide as I could, any doubts I'm still here, but I can only guide, it's no longer possible to test.
Thanks for the update. The only problem is, is that i have the newer tab and when I flash TWRP, i get a blank screen
I need a way to patch the firmware without failing, as i do not think anyone is trying to fix the blank screen bug with TWRP, unless they are on 4pad.to , but no idea due to the language barrier hehe.
themace51 said:
Thanks for the update. The only problem is, is that i have the newer tab and when I flash TWRP, i get a blank screen
I need a way to patch the firmware without failing, as i do not think anyone is trying to fix the blank screen bug with TWRP, unless they are on 4pad.to , but no idea due to the language barrier hehe.
Click to expand...
Click to collapse
have you tried to put the firmware I mentioned? this tutorial probably won't work on android 11 one ui 3.1, i say this because the TWRP is a bit old, so as long as it's on the updated firmware it's really hard to do anything.
if you don't want the specific KOO Firmware, you can get the latest firmware version for your region which is on android 10.