I was very excited to install this update that released today, but after installing it, I can't sign in to my phone. When it boots up, it flashes the homescreen wallpaper, not the lockscreen wallpaper for a second or two then the screen turns black. If I hold the power button I can view the power settings (reboot, silent, airplane mode, shut down) and also if I double press the power button, which my camera shortcut, it opens the camera. Aside from these actions, I can't do anything.
My method to installing this rom was this:
Download the rom from xiaomi.eu website
use the built in updater where I select a rom on my phone and it automatically boots to recovery for me (I'm using TWRP)
Let it do its thing, and boot up, then when it boots the errors occur.
I tried wiping cache and dalvik, but no change.
Did I miss something? Is there something I should have done differently when updating my phone? Is there a special procedure in upgrading Android versions? (1.1.2.0 is first Android Pie version on my phone)
Thank you very much.
Edit 1: I have flashed a second time, this time flashing cache, dalvik, and data. I was able to get into MIUI and set up my device, but after I rebooted the phone for a separate reason, I am experiencing the same errors as before.
Edit 2: Not 100% sure because I switched ROMs, but I probably could have gotten it working by wiping /system as well.
Hello, same thing here.
Clean install and same problem... very sad
DaniloFerracini said:
Hello, same thing here.
Clean install and same problem... very sad
Click to expand...
Click to collapse
Yep same here. I tried it again, wiping data partition and same issue. Can't downgrade because rollback protection too. I guess I'll try out Pixel Experience??
DaniloFerracini said:
Hello, same thing here.
Clean install and same problem... very sad
Click to expand...
Click to collapse
Hey, by the way, what launcher are you using? This seems to be a problem with just the lock screen so maybe there is a weird interaction happening between the launcher and the lock screen. I was using Rootless Pixel Launcher.
Edit: one more question: did you do the same thing as me where I first flashed without formatting data, then you flashed a second time, that time formatting the data? I'm thinking it could also be just because we flashed it incorrectly the first time, future flashes are gonna be messed up.
Where's the download I can find only 10.1.1.0
AquaticPossum said:
Hey, by the way, what launcher are you using? This seems to be a problem with just the lock screen so maybe there is a weird interaction happening between the launcher and the lock screen. I was using Rootless Pixel Launcher.
Edit: one more question: did you do the same thing as me where I first flashed without formatting data, then you flashed a second time, that time formatting the data? I'm thinking it could also be just because we flashed it incorrectly the first time, future flashes are gonna be messed up.
Click to expand...
Click to collapse
I make a dirty flash and clean flash, nova launcher and stock launcher, both dont work
kekkojoker90 said:
Where's the download I can find only 10.1.1.0
Click to expand...
Click to collapse
https://sourceforge.net/projects/xi...ulti_MI8_V10.1.2.0.PEACNFI_v10-9.zip/download
DaniloFerracini said:
Hello, same thing here.
Clean install and same problem... very sad
Click to expand...
Click to collapse
Try this : https://forum.xda-developers.com/android/software-hacking/remove-lockscreen-recovery-t3530008
You must have a valid custom recovery
Edit : the recovery method won't work... It's a problem with the rom. Just switch to another version....
https://xiaomi.eu/community/threads/miui-10-0-10-1-stable-release.47170/page-23 see the last posts about that
my phone also dead after install the last pie my phone stuck on a black screen
tried downgrading the miui to oreo and the phone did not work well the phone reboot after 30 sec
and after that happened I backed to pie version again but the same problem stuck on a black screen I don't want to lose my data what can I do?
there is possible to back the oreo version and restore that data from twrp backup? the apps work well or not?
almog250 said:
my phone also dead after install the last pie my phone stuck on a black screen
tried downgrading the miui to oreo and the phone did not work well the phone reboot after 30 sec
and after that happened I backed to pie version again but the same problem stuck on a black screen I don't want to lose my data what can I do?
there is possible to back the oreo version and restore that data from twrp backup? the apps work well or not?
Click to expand...
Click to collapse
You shouldn't downgrade :/
kekkojoker90 said:
You shouldn't downgrade :/
Click to expand...
Click to collapse
Even with xiaomi.eu rom ?
Otarie004 said:
Even with xiaomi.eu rom ?
Click to expand...
Click to collapse
You can downgrade from Pie to Oreo with EU rom and TWRP, the phone boot up normaly but some processes say stop working.
I had same problem yesterday. I recommend wipe system before reinstalling Oreo rom and waiting a fixed Pie rom
kekkojoker90 said:
Where's the download I can find only 10.1.1.0
Click to expand...
Click to collapse
This is the Xiaomi.eu ROM which is based on China Stable.
AquaticPossum said:
I was very excited to install this update that released today, but after installing it, I can't sign in to my phone. When it boots up, it flashes the homescreen wallpaper, not the lockscreen wallpaper for a second or two then the screen turns black. If I hold the power button I can view the power settings (reboot, silent, airplane mode, shut down) and also if I double press the power button, which my camera shortcut, it opens the camera. Aside from these actions, I can't do anything.
My method to installing this rom was this:
Download the rom from xiaomi.eu website
use the built in updater where I select a rom on my phone and it automatically boots to recovery for me (I'm using TWRP)
Let it do its thing, and boot up, then when it boots the errors occur.
I tried wiping cache and dalvik, but no change.
Did I miss something? Is there something I should have done differently when updating my phone? Is there a special procedure in upgrading Android versions? (1.1.2.0 is first Android Pie version on my phone)
Thank you very much.
Edit 1: I have flashed a second time, this time flashing cache, dalvik, and data. I was able to get into MIUI and set up my device, but after I rebooted the phone for a separate reason, I am experiencing the same errors as before.
Click to expand...
Click to collapse
This stable ver has many problems. It's hasnt stable yet. Even when you could turn the screen on, if you use the 3 buttons as default, everything is normal, but if you use fullscreen gestures and reboot your phone, you will stuck in black screen again. Many friends and me have the same black screen problems. So my advice is you should stay where you are waiting for a real "stable" ver.
For all who want to use FSG in version 10.1.2.0 I would recommend the following workaround:
a) Startup freshly installed system
b) Select navigation bar as preferred method and finish setting up the phone
c) Download Magisk v18.0
d) Reboot into TWRP and flash Magisk v18.0 zip
e) Reboot to system
f) Download the free application "Fluid Navigation Gestures" and setup the same Gestures as in Stock mi8
g)Optional: In Fluid NG, choose "Hide Navigation Bar"
It doesn't have the exact same feeling as stock but is pretty close and I think it's valid as a meantime workaround.
Related
so i installed safestrap to my droid 4 running stock rom ics. i go into recovery to install cyanogen mod 10 so i wipe everything like always and then i selected install, next i know i look at my phone and the screen is black i figure the install is done so i go to power it on and it brings me to the safestrap 10 second option so i click menu....nothing happens it shows backlight black screen then i restarted the phone and tried to boot regular, same thing is there anyway to fix this?! and since safestrap is installed everytime i try to charge my phone it turns on and tries to boot into the backlight black screen.
Sounds like you wiped ur system clean and nothing was installed over it. If you can get into safestrap then just usersd lite to put a clean version of ics on ur device. Then root and enjoy
maddeath said:
Sounds like you wiped ur system clean and nothing was installed over it. If you can get into safestrap then just usersd lite to put a clean version of ics on ur device. Then root and enjoy
Click to expand...
Click to collapse
Agreed. Probably going to have to fastboot ICS. In addition, if/when you try to install a custom ROM again, make sure you back up your unsafe system first. Then make sure you switch to your safe system to install the ROM.
Droid 4 - AOKP Skyline
when i go into safestrap it just shows a black screen, i click menu at the 10 second screen and thats what it does.
larikeal said:
when i go into safestrap it just shows a black screen, i click menu at the 10 second screen and thats what it does.
Click to expand...
Click to collapse
As others are saying, it sounds like your system is hosed.
My advice would be to download RSDLite and the appropriate fastboot files and restore the phone's software that way.
http://forum.xda-developers.com/showthread.php?t=1832992
I installed CM11 last monday from this thread: http://forum.xda-developers.com/showthread.php?t=2658534
Since then I got the issue, that after the phone is in standby for a while, I can't unlock the lockscreen. There is no input possible, just reacts like I'm not touching the screen. If I press the power button again it locks again (screen off), but then it's not possible to even see the lockscreen again, powerbutton not working anymore. The only way to use the phone again is to hold the powerbutton for 10 seconds and reboot then.
I tried to wipe all and flash again, but no change. I tried "cm-11-20140503-UNOFFICIAL-jactiveltexx.zip" from spegelius first, and then "cm-11-20140508-UNOFFICIAL-jactiveltexx.zip" from allram. Wiped everything before flashing, but no luck, still getting that bug.
Sadly I can't post directly into that topic, because I'm new here
:DDDDDDDD said:
I installed CM11 last monday from this thread: http://forum.xda-developers.com/showthread.php?t=2658534
Since then I got the issue, that after the phone is in standby for a while, I can't unlock the lockscreen. There is no input possible, just reacts like I'm not touching the screen. If I press the power button again it locks again (screen off), but then it's not possible to even see the lockscreen again, powerbutton not working anymore. The only way to use the phone again is to hold the powerbutton for 10 seconds and reboot then.
I tried to wipe all and flash again, but no change. I tried "cm-11-20140503-UNOFFICIAL-jactiveltexx.zip" from spegelius first, and then "cm-11-20140508-UNOFFICIAL-jactiveltexx.zip" from allram. Wiped everything before flashing, but no luck, still getting that bug.
Sadly I can't post directly into that topic, because I'm new here
Click to expand...
Click to collapse
I suppose you have Gt-I9295 not US version of the phone?
When you flashed the zip. did u do a factory reset? and format /system /cache?
allram said:
I suppose you have Gt-I9295 not US version of the phone?
When you flashed the zip. did u do a factory reset? and format /system /cache?
Click to expand...
Click to collapse
Yes I got the european version. Before I flashed CM11 I did a "factory reset", wiped cache and dalvik cache. I did that before flashing another rom again. I will try to flash the newest (13th may) version from your gdrive later.
:DDDDDDDD said:
I installed CM11 last monday from this thread: http://forum.xda-developers.com/showthread.php?t=2658534
Since then I got the issue, that after the phone is in standby for a while, I can't unlock the lockscreen. There is no input possible, just reacts like I'm not touching the screen. If I press the power button again it locks again (screen off), but then it's not possible to even see the lockscreen again, powerbutton not working anymore. The only way to use the phone again is to hold the powerbutton for 10 seconds and reboot then.
I tried to wipe all and flash again, but no change. I tried "cm-11-20140503-UNOFFICIAL-jactiveltexx.zip" from spegelius first, and then "cm-11-20140508-UNOFFICIAL-jactiveltexx.zip" from allram. Wiped everything before flashing, but no luck, still getting that bug.
Sadly I can't post directly into that topic, because I'm new here
Click to expand...
Click to collapse
You should also use CWM 6.0.4.7...?
Hello.
I have a problem with my phone: I install MIUI 6 (doesn't matter what version), I set it up with restore, it runs ok till the first manual reboot. Then it gets blocked at the black "MI"screen. Won't enter in the OS. Any methods to determine the culprit? Maybe taking a log (how to do that?) It gets kinda annoying to flash the zip again and again everytime I do a reboot.
Thank you.
reneftw said:
Hello.
I have a problem with my phone: I install MIUI 6 (doesn't matter what version), I set it up with restore, it runs ok till the first manual reboot. Then it gets blocked at the black "MI"screen. Won't enter in the OS. Any methods to determine the culprit? Maybe taking a log (how to do that?) It gets kinda annoying to flash the zip again and again everytime I do a reboot.
Thank you.
Click to expand...
Click to collapse
dot restore,just go for a fresh clean install,
if that also doesn't work,then simply go for fast boot method
ZenR2 said:
dot restore,just go for a fresh clean install,
if that also doesn't work,then simply go for fast boot method
Click to expand...
Click to collapse
I have lots of apps and it would take me ages to manually install them all. Back-up and restore from MIUI is my savior.
I also have Xposed Framework, that requires a reboot after install. That reboot works. First I thought it was xposed's fault, but I guess if it would have been that the phone won't start after the reboot it required. Same thing happens with wsm.
Don't install xposed ..
(I had same problem)
Clean install miui 6 once again
Paras1259 said:
Don't install xposed ..
(I had same problem)
Clean install miui 6 once again
Click to expand...
Click to collapse
Same problem meaning your phone won't boot after a while or right after installing Xposed?
I really don't get it. For example, i just clean installed MIUI, restored the apps, installed Xposed + modules and I can do as many restarts as I want, it will boot every single time. The problem appears after a while, I guess starting tomorrow morning it will get screwed up again, although I won't install any apps or anything in the meanwhile.
My LeEco S3 X522 has not been able to get past the just a sec screen. At first it was after unlocking the phone it would just stay on the loading android screen but i was able to get into the settings by using the notification bar at that time i was using pixel experience but not the latest (one before the latest) so i updated and still would not work so i just formatted everything completely then re installed the latest pixel experience. Now i am stuck on the just a sec screen when starting up the phone. The phone goes dim then the screen goes off yet i am still able to use the hardware nav buttons ( they dont do anything but light up and vibrate). Screen will come back on after a few mins but it just repeats it self.
Also, prior to this happening my phone was dropped and the screen cracked. It took a week or two until i fixed the screen.
lepenguin33 said:
My LeEco S3 X522 has not been able to get past the just a sec screen. At first it was after unlocking the phone it would just stay on the loading android screen but i was able to get into the settings by using the notification bar at that time i was using pixel experience but not the latest (one before the latest) so i updated and still would not work so i just formatted everything completely then re installed the latest pixel experience. Now i am stuck on the just a sec screen when starting up the phone. The phone goes dim then the screen goes off yet i am still able to use the hardware nav buttons ( they dont do anything but light up and vibrate). Screen will come back on after a few mins but it just repeats it self.
Also, prior to this happening my phone was dropped and the screen cracked. It took a week or two until i fixed the screen.
Click to expand...
Click to collapse
Try flashing 8 august nano gapps.
Do you have a nandroid backup of Pixel experience, if yes, then you can restore it and remove all sorts of screenlocks via twrp (Google how to) . Then flash latest gapps and os zip. Clear dalvik and cache. It should work.
It did not work. Still on just a second, even with the august 10th GAPPS. I formatted everything completely. No OS etc. Then i tried to install the stock ROM by using the chinese twrp (YDDS or something like that). It has worked before but now it did not even boot into the recovery screen unless its US twrp. I flashed RR OS (Oreo) and it would just boot loop. I can't seem to find any solution. I do not see why even after formatting all data, neither ROM will load. (Have noticed on twrp it says it could not find internal storage, yet it installs the ROMS and GAPPS. Not sure what that is about but could not find anytning online.)
lepenguin33 said:
It did not work. Still on just a second, even with the august 10th GAPPS. I formatted everything completely. No OS etc. Then i tried to install the stock ROM by using the chinese twrp (YDDS or something like that). It has worked before but now it did not even boot into the recovery screen unless its US twrp. I flashed RR OS (Oreo) and it would just boot loop. I can't seem to find any solution. I do not see why even after formatting all data, neither ROM will load. (Have noticed on twrp it says it could not find internal storage, yet it installs the ROMS and GAPPS. Not sure what that is about but could not find anytning online.)
Click to expand...
Click to collapse
Try the 6 July gapps here https://github.com/opengapps/arm64/releases/tag/20190706
I think it shouldn't give rise to your issue.
Remember to flash the nano version.
It's possible your data partition is corrupt.
First wipe system, cache , dalvik cache and data.
Then repair data, format to ext2 and them reformat to ext4. Then reboot to recovery and repair data again and finally wipe it. Reboot to recovery again. Flash stock ROM first. Then flash your preferred ROM.
RandomDelta said:
Try the 6 July gapps here https://github.com/opengapps/arm64/releases/tag/20190706
I think it shouldn't give rise to your issue.
Remember to flash the nano version.
It's possible your data partition is corrupt.
First wipe system, cache , dalvik cache and data.
Then repair data, format to ext2 and them reformat to ext4. Then reboot to recovery and repair data again and finally wipe it. Reboot to recovery again. Flash stock ROM first. Then flash your preferred ROM.
Click to expand...
Click to collapse
Sadly it still didn't work. Possible the memory chip itself is damaged? Idk
Hi, sorry for the bad english. My Xiaomi Note 11 worked perfectly fine for months since I bought it, but last night I accidentally left it charging for the whole night and when I woke up, it suddenly rebooted to recovery mode. I rebooted it back to system, which reboots the phone as usual, then I unlocked the lockscreen, everything went perfectly normal, until it rebooted again to recovery mode. I tried rebooting again, but it rebooted again to recovery mode after I unlocked the lockscreen. I tried booting it to safemode, but it went the same way. However, when I leave the lockscreen unlocked, it doesn't reboot itself. I tried turning it off and rebooting it with the screen unlocked but it did nothing. Do you guys ever have the same problem? Is there any way to fix it without wiping the data? I have some banking apps and other data that would be difficult to recover if I were to wipe out the phone.
I have the same problem too, I think it might have to do with the new update Xiaomi pushed to European devices in the last few days. We'll have to wait and see if they push a fix/if we find a fix...
Exact same problem, started appearing today. This is so weird. I already wiped data and the problem persists; went thorough the setup with no issue, and as soon as I finished it and the phone goes to the main screen, after a few seconds it started appearing again.
MIUI Global
13.0.16.0(RGCMIXM)
Android ver: 11 RKQ1.211001.001
asabaraba said:
Exact same problem, started appearing today. This is so weird. I already wiped data and the problem persists; went thorough the setup with no issue, and as soon as I finished it and the phone goes to the main screen, after a few seconds it started appearing again.
MIUI Global
13.0.16.0(RGCMIXM)
Android ver: 11 RKQ1.211001.001
Click to expand...
Click to collapse
It's really weird that it happens to other people too!
AdonysGames said:
I have the same problem too, I think it might have to do with the new update Xiaomi pushed to European devices in the last few days. We'll have to wait and see if they push a fix/if we find a fix...
Click to expand...
Click to collapse
That might be it since it happens not only to me.
Same problem happening for me too from today. Anyone know a fix for it ?
hrishi654 said:
Same problem happening for me too from today. Anyone know a fix for it ?
Click to expand...
Click to collapse
Did a second data wipe and it worked this time, the phone's been running all night without any issue. I disabled xiaomi updates for the time being
Same issue here, please any solution, I've not been able to do anything since 48 hours
Is there a way to go through this without losing my data and files?
same problem i will try to wipe data again and see if it works
ReaperCat65 said:
Hi, sorry for the bad english. My Xiaomi Note 11 worked perfectly fine for months since I bought it, but last night I accidentally left it charging for the whole night and when I woke up, it suddenly rebooted to recovery mode. I rebooted it back to system, which reboots the phone as usual, then I unlocked the lockscreen, everything went perfectly normal, until it rebooted again to recovery mode. I tried rebooting again, but it rebooted again to recovery mode after I unlocked the lockscreen. I tried booting it to safemode, but it went the same way. However, when I leave the lockscreen unlocked, it doesn't reboot itself. I tried turning it off and rebooting it with the screen unlocked but it did nothing. Do you guys ever have the same problem? Is there any way to fix it without wiping the data? I have some banking apps and other data that would be difficult to recover if I were to wipe out the phone.
Click to expand...
Click to collapse
I didn't put mine to charge and this happened
mateuszzsa said:
same problem i will try to wipe data again and see if it works
Click to expand...
Click to collapse
Can you give us an update if it works? I also post the problem on Reddit and some people there were also able to fix it by wiping the data.
Will wiping the data fix the issue, if it does, please do let us know
Dr_toluwani said:
Will wiping the data fix the issue, if it does, please do let us know
Click to expand...
Click to collapse
47 minutes since i wiped the data by the second time and my phone its working, I don't know until when.
Does anyone know of way to save the data? Surely it must be accessibl.
ishouldbeworking said:
Does anyone know of way to save the data? Surely it must be accessibl.
Click to expand...
Click to collapse
I found a way to do so. The problem is that once the phone is unlocked you have a few minutes before it gets booted into recovery mode. So:
Step 1) Have the phone connected to a computer before booting it up, with file explorer in the "this pc" category (where the phone storage will appear)
Step 2) boot the phone and input the password (if any)
Step 3) QUICKLY pull down the notification bar and press the usb options notification
Step 4) QUICKLY press the second option for file transferring
Step 5) QUICKLY open phone storage from pc once it pops up (at this point the phone screen will probably be black with a white loading circle but the phone storage is still accessible!!! You now have a few minutes to transfer any data you want)
Step 6) QUICKLY search through phone storage for any important data and copy/paste it to your computer
Sooner or later the phone will be booted to recovery mode and the mi logo will appear and the phone storage will disappear from the computer so repeat above steps until all your data is backed up.
If a file transfer gets stopped while running, copy/paste the data again on the next "run" and choose to ignore files that are already copied. With this method I managed to backup all my photos and files before wiping the phone.
This problem might be due to a problematic firmware update. My phone was running MIUI version 13.0.12(RGKEUXM) (europe version). I wiped the data and updated my phone to version 13.0.13(RGKEUXM) after setting it up just in case. I will update this thread if the problem reappears.
I am running RGCMIXM (13.0.16.0) and have encountered the issue. Really annoying. Did the wipe all and had no success. I hope someone can help find a fix. No feedback on the issue i logged thru the feedback app to Xiaomi.
akallabeth said:
I am running RGCMIXM (13.0.16.0) and have encountered the issue. Really annoying. Did the wipe all and had no success. I hope someone can help find a fix. No feedback on the issue i logged thru the feedback app to Xiaomi.
Click to expand...
Click to collapse
did you try to perform 2 wipes? apparently my device is working properly after that.
mateuszzsa said:
did you try to perform 2 wipes? apparently my device is working properly after that.
Click to expand...
Click to collapse
Which wipe method did you do? Just a factory reset or a reflash?