I did not find answer anywhere
You can get back to stock emui by
using inbuilt honor 4x updater
download latest update zip file from official honor site for your device Che1-L04 extract the zip.
then follow the steps similar to force update procedure mentioned in the manuals provided by honor
which are :-
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Step 3. Make sure your handset is power off. Insert the Micro SD card into the handset. Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
Step 4. When the progress bar stop, the phone will restart automatically.
Pepe the Frog said:
You can get back to stock emui by
using inbuilt honor 4x updater
download latest update zip file from official honor site for your device Che1-L04 extract the zip.
then follow the steps similar to force update procedure mentioned in the manuals provided by honor
which are :-
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Step 3. Make sure your handset is power off. Insert the Micro SD card into the handset. Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
Step 4. When the progress bar stop, the phone will restart automatically.
Click to expand...
Click to collapse
This method probably will not work because in order to get custom ROM working, you must have already replaced stock recovery with TWRP or CWM...
---------- Post added at 03:04 PM ---------- Previous post was at 03:02 PM ----------
itsmejerrin said:
I did not find answer anywhere
Click to expand...
Click to collapse
Download official EMUI ROM zip and follow this post:
http://forum.xda-developers.com/showpost.php?p=68695798&postcount=2
Pepe the Frog said:
You can get back to stock emui by
using inbuilt honor 4x updater
download latest update zip file from official honor site for your device Che1-L04 extract the zip.
then follow the steps similar to force update procedure mentioned in the manuals provided by honor
which are :-
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Step 3. Make sure your handset is power off. Insert the Micro SD card into the handset. Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
Step 4. When the progress bar stop, the phone will restart automatically.
Click to expand...
Click to collapse
this worked for me for my che1-l04 i had twrp recovery and was running cyanogen mod 13 on the phone
i am not saying it will work 100% but its worth a shot
I upgraded via firmware finder, but now I find myself with an incomplete version, NRD90M test-keys, many basic functions don't work, what can I do?
roll back, follow the guide!
albj13 said:
roll back, follow the guide!
Click to expand...
Click to collapse
Hello, go to this link mega:#fm/i5x1SQiD is downloaded to the folder where there is inside another 'dload' folder that you will copy to a microSD which in turn will need to enter in P9 Plus. It 'a file that I downloaded from this forum, but I do not remember which thread. Then restart your phone by holding down the volume button in the center (Ne below and above it). At that point it will start loading and at the end will reboot or do you start again. This allows you to change the microSD with another in which there is always the dload folder with the file corresponding to your update.app P9 Plus firmware. Repeat the reboot and hold the volume button. Unless smoothly you should go back an Android Marshmallow.
So I have a p10, and decided to see what i could do with it. Having little experience, I managed to get somewhere. Unlocked the bootloader, got twrp, installed it with the command fastboot flash recovery recovery.img and got:
target reported max download size of 471859200 bytes
sending 'recovery' (32034 KB)...
OKAY [ 1.012s]
writing 'recovery'...
OKAY [ 0.200s]
finished. total time: 1.222s
WOOT! Awesome! No problems! Then I issued: fastboot boot recovery.img
And got
downloading 'boot.img'...
OKAY [ 1.020s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 1.030s
WTF?!
So after a bit, I misread and flashed boot.img with: fastboot flash boot boot.img
I guess I flashed the wrong image. I dunno. But now it boots into the screen that tells me "Your device is unlocked and can'r be trusted" tells me its booting, reboots, goes to the same screen again, says its rebooting again, then brings me to Huawei eRecovery. I connect to my wifi network, telling it to download the latest version and recover, and it says "getting package info failed" So I ma stuck with a device that won't boot.
Oh yes, and down volume and power don't bring me to fastboot anymore.
Begging for help here please.
Do the whole rebranding to unbrick, not sure if you flashed wrong image on boot.
Advice: When flashing recovery boot it by powering off and using key combo. Or adb command. Not from fastboot as IMG.
I did a google search on rebranding to unbrick, and found a guide on the 9. So I assume its similar. It first tests me to boot into twrp. I can't. Twrp never got installed. The next step is to get the offical firmware and put it on the SD card. I can't find it. I am in Canada, and can't find any firmware for canada, nevermind anything north american. It is however possible I have found the wrong guide, as I don't really know what I am doing. As a complete noob, links to guides would be nice when possible and available when making recommendations.
The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.
smariob said:
The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.
Click to expand...
Click to collapse
okay, i know you are trying to be helpful, but I just can't follow it...
You said "Download Update ZIP. I suggest rebrand to VTR-L29 C432 !" Which one of them? Is the B just a build number, and I should get the latest? please remember, you are talking to a noob.
You talk about 3 files, update.zip, update_data_public.zip and update_all_hw.zip Do I need them all? If so the last one, where I change filelist.xml to all /cn/update_full_all_cn.zip doesn't work. See the following link http://update.hicloud.com:8180/TDS/.../v92067/f2/full/all/cn/update_full_all_cn.zip
Also, rename the file, "Where spcseas is the model of the file you are downoloading" Huh? I know I have to replace the word spcseas with something, but with that?
Now it says to run update.bat Whats the point? I have not been directed to plug the phone into the computer, and even if I did, the computer won't recognize it because I can't get it into any mode... Where do I put these files? They all go in the same directory? I just can't follow this guide as much as I try..
THERE IS GOOD NEWS HOWEVER!
I have been able to get it into TWRP! This means I can get into fastboot, which means I can re-flash the correct boot.img, IF I can get my hands on it (and assuming that's the actual issue It likely is. It was working until I flashed this other boot.img file.). So if I can get direction on how to get it, I should be okay. Double triple and quadruple bonus points for just providing me a direct link to the boot.img file to use without having to play around trying to follow guides I can't seem to understand.
UPDATE!!
Now although I can get into TWRP, its hit and miss, but I can get there eventually, it will no longer boot into fastboot/recovery. When I click reboot, and choose bootloader in TWRP, it just freezes..
This is getting frustrating. Apparently getting into the bootloader is hit and miss, but i can do it.
Search for Huawei update extractor in order to get BOOT.IMG from update.app (inside update zip) I could upload one myself, but I'm not at home right now.
TWRP doesn't support reboot atm. You must power off completly. To boot to recovery press power on and vol + until huawei logo appears, then relase power. It should boot to recovery TWRP in this case.
For boot bootloader you press vol - when you are connecting usb cable to PC.
smariob said:
The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.
Click to expand...
Click to collapse
smariob said:
Search for Huawei update extractor in order to get BOOT.IMG from update.app (inside update zip) I could upload one myself, but I'm not at home right now.
TWRP doesn't support reboot atm. You must power off completly. To boot to recovery press power on and vol + until huawei logo appears, then relase power. It should boot to recovery TWRP in this case.
For boot bootloader you press vol - when you are connecting usb cable to PC.
Click to expand...
Click to collapse
Thats good to know. I was getting TWRP more often when I did it from off. What was happening was I would holds power and volume up, release power when the logo appeared, and MOST of the time I would boot into TWRP. Sometimes it would just reboot, I would continue to hold up, and it would either reboot, or boot into TWRP. Occasionally I would get the recovery that came with the phone ?!?!
In any event, I managed to get into TWRP, boot into recovery, extract the boot.img, flash it... AND IT WORKED! Phone booted!
So after all this, I backed up EVERYTHING I could using TWRP. The Boot partition, System partition, EVERYTHING! It kept failing on the Data partition, but from my research that wasn't that important anyway. I then installed SuperRoot_noverity_nocrypt.zip, rebooted, installed phh's SuperUser, installed Root Checker, and finally, I have root!!
Thank you so much for the help. About to go "thank clicking" for all the help you provided.
P9 EVA-L09. I am trying to get original firmware.
The phone was rooted. I relock the bootloader using adb. After that phone has stuck in Huawei eRecovery and can't download firmware.
I use the dload method to perform upgrade. I have downloaded few months ago two zip files.
First copy only the UPDATE.APP (~2GB) file to dload folder on sdcard. Then phone start working. After that from the other zip replace, put the all files
in dload folder. Upgrading was successful, but few apps are missing - camera, contacts and etc -> example ?
Trying this image says: installing updates fails after 10-15%.
Can you suggest me how to fix it or may another image to use?
Thanks in advance !
netaccs said:
P9 EVA-L09. I am trying to get original firmware.
The phone was rooted. I relock the bootloader using adb. After that phone has stuck in Huawei eRecovery and can't download firmware.
I use the dload method to perform upgrade. I have downloaded few months ago two zip files.
First copy only the UPDATE.APP (~2GB) file to dload folder on sdcard. Then phone start working. After that from the other zip replace, put the all files
in dload folder. Upgrading was successful, but few apps are missing - camera, contacts and etc -> example ?
Trying this image says: installing updates fails after 10-15%.
Can you suggest me how to fix it or may another image to use?
Thanks in advance !
Click to expand...
Click to collapse
Did you restore stock ROM (by eg HWOTA) before relocking - because (re)locking invokes Factory reset. There was also another report of similar brick bexause of relocking with rooted or custom ROM.
No I am not. It was stock rom which I rooted.
I am trying several update.app but when processi is complete always something wrong. No all apps installed or keyboard missing and etc.
Can you suggest me what and how to try to install?
I found this link with images.
I am downloading both B136. First I have to copy UPDATE.APP to dload folder on sdcard from update.zip. Then delete update.app from dload
and extract all from B360_update_data_full_hw_eu.zip to dload folder and again perform upgrade (turn off the phone, then holding vol up + vol down + power key
until logo display)
Is that correct?
Hey people. Just got my Realme8 and I'm trying to get the stock A.24 version but I'm stuck at A.22. I heard in a post that you can connect to a VPN and it will let you update? Is that correct? Or can we like update manually in sometype of way?
Want to force ? - ok ... can try next method
1. download the latest firmware update zip from offsite : https://www.realme.com/in/support/software-update
2. transfer the firmware to the phone internal storage /if not already directly downloaded/.
3. find the firmware file in File Manager and click on the firmware, then select Update Now...
---OR---
3. PowerOff
4. Press and hold the Power + Volume Down buttons simultaneously until your phone enters into the Recovery Mode.
5. In the Recovery menu, choose the language you want.
6. Next, select install from the storage device and find the firmware From phone storage
DaLiV said:
Want to force ? - ok ... can try next method
1. download the latest firmware update zip from offsite : https://www.realme.com/in/support/software-update
2. transfer the firmware to the phone internal storage /if not already directly downloaded/.
3. find the firmware file in File Manager and click on the firmware, then select Update Now...
---OR---
3. PowerOff
4. Press and hold the Power + Volume Down buttons simultaneously until your phone enters into the Recovery Mode.
5. In the Recovery menu, choose the language you want.
6. Next, select install from the storage device and find the firmware From phone storage
Click to expand...
Click to collapse
Can't find my device, there's no Realme 8 nor RMX3085 which is the model. Can I download it anywhere else?
Edit: if I do this, will my data be wiped?
can search there also
Realme Firmware Update (Stock ROM) - Realme Firmware
Flash your Realme phone with latest firmware rom (Flash File) via Realme Flashtool.
realmefirmware.com
that is inplace upgrade - OTA-Like ...
surely: backup of important data is always good idea, on EVERY update (here type has no matter) .... as issue may arrise from any incompatibility points ...