start configuring language, dont connect any WIFI or DATA and Next button after this the screen show Configuring Phone, press volume up + volume down - home button and button back, and bypass the stupid activation.
TheMadScientist420 said:
start configuring language, dont connect any WIFI or DATA and Next button after this the screen show Configuring Phone, press volume up + volume down - home button and button back, and bypass the stupid activation.
Click to expand...
Click to collapse
Thanks for this. I just received my repaired G4 back from LG and didn't want to have to activate it to make sure it's all working. :good:
tbob18 said:
Thanks for this. I just received my repaired G4 back from LG and didn't want to have to activate it to make sure it's all working. :good:
Click to expand...
Click to collapse
I saw some people having the issue. Remebered it from the g3. So figured id put it up. Lol like 2 or 3 people back to back had the issue on g4
thank you.unlock
Related
Hi everyone,
I used to have a Hermes. Back then I was able to disconnect the GPRS data connection by pressing + hold the disconnect button (the red phone button). However, after changed to Kasier, pressing + hold this button = lock the phone. I need to go to the Comm. Manager and choose flight mode and change back in order to make that connection to disconnect. Anyone knows other simple method to do so? Thanks a lot!
Regards,
rcyh
heh, there's also the data connection tab in the com manager? only have to push it once vs. twice for flight?
Oh yes. That's one method. But do you know that is there any hardware button I can press+hold instead of going into Comm.Mgr to achieve the same result? Thanks again!!
Hold the 'hangup' button (the red one).
nukenine said:
Hold the 'hangup' button (the red one).
Click to expand...
Click to collapse
rcyh said:
.... Back then I was able to disconnect the GPRS data connection by pressing + hold the disconnect button (the red phone button). However, after changed to Kasier, pressing + hold this button = lock the phone. ......
Click to expand...
Click to collapse
They changed it.
[ashamed]
Ur obviously right... sorry.
nukenine said:
Hold the 'hangup' button (the red one).
Click to expand...
Click to collapse
If you do that the phone will lock itself it does not disconnect anymore
rcyh said:
Hi everyone,
I used to have a Hermes. Back then I was able to disconnect the GPRS data connection by pressing + hold the disconnect button (the red phone button). However, after changed to Kasier, pressing + hold this button = lock the phone. I need to go to the Comm. Manager and choose flight mode and change back in order to make that connection to disconnect. Anyone knows other simple method to do so? Thanks a lot!
Regards,
rcyh
Click to expand...
Click to collapse
How about tapping on the G icon on the first line of the screen above and select Disconnect? ok, its not a hardware button, but its not complicated.
on the other hand, why would anyone want to disconnect gprs? its not like it costs money to just have the connection on while not transferring data, is it?
There is a discussion here, I've loaded a new com manager to be able to turn off 3G when not needed. I also am using AE Button Plus to map back keys to do things like disconnect GPRS, works great.
http://forum.xda-developers.com/showthread.php?t=328805&page=2
ionutz6 said:
How about tapping on the G icon on the first line of the screen above and select Disconnect? ok, its not a hardware button, but its not complicated.
on the other hand, why would anyone want to disconnect gprs? its not like it costs money to just have the connection on while not transferring data, is it?
Click to expand...
Click to collapse
I think it's more about the battery not getting empty too quick
Try these method:
http://forum.xda-developers.com/showpost.php?p=2135791&postcount=4
How to turn off GPRS/MMS completely?
Hi everyone,
I got a HTC Tytn 2 and i have a problem with it.
When i boot the phone it starts up and goes into windows like every windows mobile phone.
But when i press the standby button my screen wont go out of standby.
Only when i reset the phone it will work again.
Anyone got idea's ?
Oke, since no one responded.
Is there any way how i can make the Power Button replaced with the Speed Dial Button.
Because i think my power button is broke.
WGN88 said:
Oke, since no one responded.
Is there any way how i can make the Power Button replaced with the Speed Dial Button.
Because i think my power button is broke.
Click to expand...
Click to collapse
Have you at least tried backing up your data and doing a hard reset first ?
Yes, and i have also tried to put on a new rom and even updated the radio.
Iam a little bit out of idea's...
here are some more ideas:
1. how to test the power button: you say pressing the power button does not wake up the device once it goes to sleep. conversely, does pressing the power button put the device to sleep while the screen is on? if the power button is unable to make the device go off->on as well as on->off, then the power button is likely broken. if pressing the button achieves on->off, then the power button is probably ok and some software issue becomes more likely.
2. how to enable wake on pressing ANY hardware button: look for an option in Settings. i can't tell you the exact option because the ROM i am using does not have a link for this option, but this option does exist 100% in stock ROM and in lots of other ROMs. it contains settings like "Lock all buttons except power button" and "Keep all buttons unlocked" or something similar. by using the second option, pressing ANY hardware button while the screen is off will wake up the device.
3. you can use AE button plus to perform even more advanced button (re)mappings.
4. just to be sure that your device is really working correct, does the screen wake up when you call the phone or when you receive a text message? if it does not wake up even then, then search for "sleep of death".
Thanks for the response.
I think its a Service of Death problem.
Because when i try calling/smsing it, it wont go on
The buttons do work then...hopefully there's a fix for this problem...
Oke, i tried switching to 2G or 3G only but that didn't fix my Standby of Death.
I also bought a new sim card of vodafone so i wont get a No Sim error.
But what can i do now about it...it hangs like every 5 min...
Okay, after a will testing, the phone hangs every time its almost like when iam on the road with my tytn 2 and placing it upside down, it hangs.
But when iam putting it in the leather holder it doesn't hang.
Any had the same problems ?
WGN88 said:
Okay, after a will testing, the phone hangs every time its almost like when iam on the road with my tytn 2 and placing it upside down, it hangs.
But when iam putting it in the leather holder it doesn't hang.
Any had the same problems ?
Click to expand...
Click to collapse
Maybe it's hardware and something is coming loose
my damaged nexus one screen has progressed to the point of a black screen all the time... i didnt think of it before the screen died, but i am a bit stumped as to how i now reset to clear all my data? i cant see anything on the screen, but the phone still has my google account linked to it.
doh! :-(
reason i want it cleared: may send in for repair and i dont want others to get my info, or i may have to send to insurance company for payout (they said to hang on to phone for now) and i dont want them to see my info, or may sell damaged unit if insurance doesnt pay and i dont want those folks to get my info either.... see the problem?
You can try this. Did a google search.
http://www.droidforums.net/forum/droid-general-discussions/28793-how-do-full-adb-wipe-help.html
thanks for the link...would work if id had debugging enabled before the screen died... adb wipes require debugging mode.
any other suggestions?
There's this:
http://code.google.com/p/androidscreencast/
But if you don't have Debugging enabled and can't get it to register when you hit "adb devices" you're probably effed. I don't know much about touch screen engineering, though. Does it still respond to touch as far as you can tell, or is the screen completely dead when the OLED display stops working?
This serves as a good warning for others, though. ALWAYS MAKE SURE USB DEBUGGING IN SETTINGS > APPLICATIONS > DEVELOPMENT IS CHECKED. There's really no good reason I can think of that would ever make you want to leave this unchecked, and this is an example of when it would come in very handy.
cant you use the clear storage function by booting while holding volume down, waiting 5 seconds, then pressing volume down 3 times followed by a press of the power button?
flybyme said:
cant you use the clear storage function by booting while holding volume down, waiting 5 seconds, then pressing volume down 3 times followed by a press of the power button?
Click to expand...
Click to collapse
is this a commonly known sequence ? if so, please link to a list of all the known boot-up key combos. thanks
Kiserai said:
There's this:
http://code.google.com/p/androidscreencast/
But if you don't have Debugging enabled and can't get it to register when you hit "adb devices" you're probably effed. I don't know much about touch screen engineering, though. Does it still respond to touch as far as you can tell, or is the screen completely dead when the OLED display stops working?
This serves as a good warning for others, though. ALWAYS MAKE SURE USB DEBUGGING IN SETTINGS > APPLICATIONS > DEVELOPMENT IS CHECKED. There's really no good reason I can think of that would ever make you want to leave this unchecked, and this is an example of when it would come in very handy.
Click to expand...
Click to collapse
the digitizer still accepted touch input as screen beneath began to fail. colors bled from the cracks and the images began to imprint in the screen... within a few hours, it was completely illegible, and then the next morning, it appeared as a dysfunctional unit with a non working screen.
i will try and methods suggested, but i have no way to verify success... thanks for the sequence.
well when you boot by holding power, your given options FASTBOOT, RECOVERY, CLEAR STORAGE, SIMLOCK
Heres the exact key combination
Boot phone using Volume Dn + Power
Wait 5-10 seconds to be safe
Press Volumn Dn twice
Press Power Btn
Press Volume Up
Phone should reboot after 5 seconds
i will try that... confirmation of success will be the charging LED turning off and then back on again?
nexusonemeover said:
i will try that... confirmation of success will be the charging LED turning off and then back on again?
Click to expand...
Click to collapse
of the reboot? ya. i cant imagine doing this without the screen lol. Sorry i couldnt be more help
You could also probably flash a PASSIMG.zip from the bootloader. That will overwrite all partitions so it should make it 100% stock.
It might be harder to do without the screen than the clear storage function though.
flybyme said:
of the reboot? ya. i cant imagine doing this without the screen lol. Sorry i couldnt be more help
Click to expand...
Click to collapse
tried the method... and i think it worked... i cant verify, but thanks for the help guys.
You can easily verify that by sending yourself an email and see if your phone can get the notification of that new email (by trachball or sound).
There is an option in the call settings to check in order to have pressing the power button hang up a call. My flex started killing calls with power button as soon as I got kit Kat. I found the setting feature and it was already unchecked. I set it and rebooted, unchecked rebooted about 4 times. I have tried going back to 4.2.2 but for some reason I can't. Any other ideas?
Sent from my plasticy, bendy, electronic gadget thing using tapatalk forum reading/posting thing.
Did you unchecked the option (power key ends call) on the setting under accesbility?
Sent from my LG-D959 using XDA Premium 4 mobile app
Right. Unchecked there too.
Sent from my plasticy, bendy, electronic gadget thing using tapatalk forum reading/posting thing.
This happens to me also after updating to KitKat. I can't, for the life of me, figure it out. The option is unchecked in call settings.
I live in sweden and got the kitkat update now i got the same problem and unchecking the checkbox doesnt help you had any luck solving the problem?
Yep after KitKat and trying everything I have the same problem and nothing seems to fix it. The weird thing too is when I LG Flash back to stock Jellybean my double tap to wake doesn't work at all.
ajsmsg78 said:
Yep after KitKat and trying everything I have the same problem and nothing seems to fix it. The weird thing too is when I LG Flash back to stock Jellybean my double tap to wake doesn't work at all.
Click to expand...
Click to collapse
This should fix the knock on feature problem at least
Sent from my LG-D950 using XDA Premium 4 mobile app
I thought i was crazy but the same thing happens to my flex maybe it will get resolved soon
HIT EM WIT DAT FLEX
This back button hang up thing is pissin me off now i waited 45 mins on the phone this morn for an irs operator, soon as they picked up i hit the button and bam hung up.
HIT EM WIT DAT FLEX
fleurdelisxliv said:
This back button hang up thing is pissin me off now i waited 45 mins on the phone this morn for an irs operator, soon as they picked up i hit the button and bam hung up.
HIT EM WIT DAT FLEX
Click to expand...
Click to collapse
VS980 does the same thing double tap on blank screen or power button ends call. Not set to end call with power button in settings confirmed.
ldsteele said:
VS980 does the same thing double tap on blank screen or power button ends call. Not set to end call with power button in settings confirmed.
Click to expand...
Click to collapse
I checked same with mine it is not set to do that
HIT EM WIT DAT FLEX
FIX : shout down phone, press down all 3 buttons(volume up down and power) and waitfor some options to show up and turn them off.
Voila now your problem should be fix.
The option is for those whos touchscreen is not working and they can answer calls with the 3 buttons.
i know how to fix this
Bowmanspeer said:
There is an option in the call settings to check in order to have pressing the power button hang up a call. My flex started killing calls with power button as soon as I got kit Kat. I found the setting feature and it was already unchecked. I set it and rebooted, unchecked rebooted about 4 times. I have tried going back to 4.2.2 but for some reason I can't. Any other ideas?
Sent from my plasticy, bendy, electronic gadget thing using tapatalk forum reading/posting thing.
Click to expand...
Click to collapse
Resolution**** turn it off. Hold down the power and up and down volume keys all at once until a new screen pops up. Select the off option. Then your phone will reboot and the problem is fixed.
Dont waste your time calling your provider they are clueless. ?
hello, i have found by accident how to fix this. It is not a software problem. Its a option enabled for those oho have cracked screen or thouch is not responding. In order to fix it turn off your phone and hold all 3 buttons pressed, volume up down and power buttons . Hold them untill some options show up. And turn that off. That should fix the problem . I Hope this helpped .
Anybody having problems with the power button not working?
It doesn't work at all no matter how hard I push. At times it works without issue, other times I have to use the camera button to wake my phone.
Anyone else with this?
Defective unit.
me too!!!!
twistedh said:
Anybody having problems with the power button not working?
It doesn't work at all no matter how hard I push. At times it works without issue, other times I have to use the camera button to wake my phone.
Anyone else with this?
Click to expand...
Click to collapse
I have this problem just now..i asked my sister to call me to wake up my phone. I thought it was lagging. Turned out the power button is not working. I bought my phone almost three weeks ago...
Power button stopped working for me also
joannaricanaval said:
I have this problem just now..i asked my sister to call me to wake up my phone. I thought it was lagging. Turned out the power button is not working. I bought my phone almost three weeks ago...
Click to expand...
Click to collapse
xsoliman3 said:
Power button stopped working for me also
Click to expand...
Click to collapse
Did you both ever opened the phone, maybe for repair or the.prevoius owner? Maybe check the "outside" when opening phone (and removing LCD) many times the button flex cable gets damaged or get a small crack so it stop working after some time... The button flex is mounted very easily, maybe just need to get it back right into position and make sure it holds the contacts. The whole flex is just 6euro, repairing easy.. Just follow "ifixit"
✌
I had a problem with the power button on my phone recently. It was off, just like you describe, guys.
But the combination: power button + vol UP, to force a reboot of the phone worked and after booting, the button was working and the problem never occurred again.