Database Develop

Stuck in boot up screen

ok, i am stuck on my boot up screen. i flashed a zip file xposed arm zip. after the reboot it will not pass the boot animation screen. now on my old Motorola phone, i would do the pwr + vol keys to boot back in to recovery. well this does no work on my X. any one have any ideas. I am rooted, unlocked, twrp was installed from play store, & i did do a back up. thanks

JWACK72 said:
ok, i am stuck on my boot up screen. i flashed a zip file xposed arm zip. after the reboot it will not pass the boot animation screen. now on my old Motorola phone, i would do the pwr + vol keys to boot back in to recovery. well this does no work on my X. any one have any ideas. I am rooted, unlocked, twrp was installed from play store, & i did do a back up. thanks
Click to expand...
Click to collapse
What device do you have, XT1095, XT1097, etc? And you are not able to boot into the bootloader using vol down + power correct?

It was a 1096, now its trash. it would go into fastboot, but could not get into twrp recovery. its done. RIP

JWACK72 said:
It was a 1096, now its trash. it would go into fastboot, but could not get into twrp recovery. its done. RIP
Click to expand...
Click to collapse
If it boots to fastboot, it's not dead. Just reflash the recovery and you're good to go.
Sent from my XT1095 using Tapatalk

Was there a resolution for this? I'm having a similar problem. I'm not sure how I got to this status, but here's what I'm dealing with:
Device: XT1095
Bootloader: Unlocked
Rooted, ROM - Resurrection Remix, TWRP
Turning on the phone reaches the RR bootsplash and proceeds to bootloop.
When holding down the power and volume down, it will enter fastboot.
When I try to open TWRP recovery, it'll show the blue TWRP screen and just sit there.
I have tried to reinstall TWRP, but that has no effect. I didn't want to manually flash another ROM or go back to stock because at least now it seems USB debugging is on and if I flashed a ROM I cant be sure I'd be able to turn it on. Do any of you pros have some ideas hove I can get back into my phone? Thanks

bibbin said:
I have tried to reinstall TWRP, but that has no effect. I didn't want to manually flash another ROM or go back to stock because at least now it seems USB debugging is on and if I flashed a ROM I cant be sure I'd be able to turn it on. Do any of you pros have some ideas hove I can get back into my phone? Thanks
Click to expand...
Click to collapse
Do you have a USB-OTG device plugged in while trying to start TWRP? If so remove it, you can mount it after TWRP starts if this helps.
Have you tried a different build of TWRP? I'm currently using the one built by invisiblek, one of the CM devs for the victara. It was built and posted on December 8th and is here: http://www.invisiblek.org/twrp/twrp_2.8.7.0-0624b8bd_victara.img
Have you tried flashing the stock recovery to see if that will start? If it does, you could use the factory reset option there and then try reinstalling TWRP. (TWRP has a settings directory in /sdcard and maybe that is corrupted.)
There have been a few people posting with this problem but I've not seen a definitive fix for it.

Thank for the quick response. No, I don't have USB-OTG inserted. It is using TWRP 2.8.7.1. No, I haven't tried installing the version you mentioned. What I did do was attempt to flash the pre-installed TWRP 2.8.1.0 via MOTO X TOOLKIT. It failed. I'm not very experienced at using ADB manually. As I mentioned, I've been reluctant to flash another ROM (custom or stock) because I don't want to get stuck with USB debugging inactive with no way to get in far enough to reactivate it.
---------- Post added at 04:32 PM ---------- Previous post was at 03:40 PM ----------
If I manage to install the invisiblek TWRP and it opens properly will I then be able to restore the backups created with TWRP 2.8.7.1?
If that's the case, I need to find a tutorial on installing TWRP manually via ADB, right? I usually install TWRP via TWRP Manager.

bibbin said:
Thank for the quick response. No, I don't have USB-OTG inserted. It is using TWRP 2.8.7.1. No, I haven't tried installing the version you mentioned. What I did do was attempt to flash the pre-installed TWRP 2.8.1.0 via MOTO X TOOLKIT. It failed. I'm not very experienced at using ADB manually. As I mentioned, I've been reluctant to flash another ROM (custom or stock) because I don't want to get stuck with USB debugging inactive with no way to get in far enough to reactivate it.
---------- Post added at 04:32 PM ---------- Previous post was at 03:40 PM ----------
If I manage to install the invisiblek TWRP and it opens properly will I then be able to restore the backups created with TWRP 2.8.7.1?
If that's the case, I need to find a tutorial on installing TWRP manually via ADB, right? I usually install TWRP via TWRP Manager.
Click to expand...
Click to collapse
That's interesting, the TWRP Manager has never worked correctly for me although it's been a long time since I've tried it.
To flash manually, you actually need fastboot which is usually installed along with adb. If you open a command window, and type in fastboot and it runs, the rest is pretty easy. If it doesn't run, this thread has the 15 second ADB/Fastboot installer, select to install it system-wide: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Download the recovery image, rename the file to twrp.img, then open a command window in the folder where you downloaded it (type cmd then Enter in the address line at the top of the folder window.)
When the command window is open and the phone is in bootloader mode and connected to the computer with the USB cable, enter the command "fastboot device" (without the quotes) If everything is working it will list the serial number of your phone.
Then enter "fastboot flash recovery twrp.img" (without the quotes) to start the flashing process, ignore the size mismatch message. It will only take a few seconds to complete.
Use the volume down key to highlight recovery, then volume up to select it. Hopefully TWRP will boot up and you'll be good to go!

Well, reinstalling TWRP didn't fix it. Thoughts? Anyone?

bibbin said:
Well, reinstalling TWRP didn't fix it. Thoughts? Anyone?
Click to expand...
Click to collapse
Reflash stock rom from fastboot.
Sent from my XT1095 using Tapatalk

UPDATE: Thanks all. Well, after fiddling around with various methods of reinstalling TWRP, I managed to get it reinstalled and all is back to normal now.

TWRP Backup

Can Anyone Upload A TWRP Backup For PRA-LA1 OR PRA-LX1 ?!
Cause My Device Is Bricked And I Can't Boot Or Use It Anymore !
So,Can Anyone Upload The TWRP Backup As Fast As Possible !?
I Want These From The Backup:-
Boot
Cache
Cust
OEMinfo (if it's PRA-LA1C185B120)
Data
System
Vendor
Product
Version
@haky86
@ChinHon
Can Anyone Of You Make A TWRP Backup For Me,Please ?!
I Need It A.F.A.P !

Here is a complete TWRP backup of the B100. Then make updates OTA, or with the Firmwarefinder.

ChinHon said:
Here is a complete TWRP backup of the B100. Then make updates OTA, or with the Firmwarefinder.
Click to expand...
Click to collapse
Thanks For The Help.
I'll Try It And Report Back.
:laugh:

ChinHon said:
Here is a complete TWRP backup of the B100. Then make updates OTA, or with the Firmwarefinder.
Click to expand...
Click to collapse
It Locked My Bootloader
And Keeps Booting To eRecovery
So, Tomorrow I'll Try To Unlock The Bootloader
And Make Factory Reset From The Stock Recovery
Then Flash The TWRP RECOVERY
Otherwise Thank You
I Think It'll Work After I Do This

Press and hold vol.+ and vol.- and power to the device restarts. Now an update process begins with 5% breaks off. Now chooses in the menu the Reboot.
---------- Post added at 20:56 ---------- Previous post was at 20:53 ----------
The Bootloader Unlocking automatically makes the Factoryreset.

ChinHon said:
Press and hold vol.+ and vol.- and power to the device restarts. Now an update process begins with 5% breaks off. Now chooses in the menu the Reboot.
---------- Post added at 20:56 ---------- Previous post was at 20:53 ----------
The Bootloader Unlocking automatically makes the Factoryreset.
Click to expand...
Click to collapse
I Tried The Update Thing Didn't Work For Me !
But I'll Try And Unlock The Bootloader !

ChinHon said:
Press and hold vol.+ and vol.- and power to the device restarts. Now an update process begins with 5% breaks off. Now chooses in the menu the Reboot.
---------- Post added at 20:56 ---------- Previous post was at 20:53 ----------
The Bootloader Unlocking automatically makes the Factoryreset.
Click to expand...
Click to collapse
But Can You Give Me Your Bootloader Unlock Code ?!
Cause I Can't Obtain Any Information With The Phone Bootlooping To eRecovery !

The code must fit to the IMEI. Get him by DC Unlocker Client.

ChinHon said:
The code must fit to the IMEI. Get him by DC Unlocker Client.
Click to expand...
Click to collapse
I Unlocked The Bootloader
Then My Device Goes To Error Mode And Says
"Update System Again"
Error!
Error NO : Load Failed
Fastboot Doesn't Do Any Thing At All
And When I Reboot It It Goes To Error Mode Again And Again

Flash now a Recovery.
https://forum.xda-developers.com/p8...-to-root-huawei-p8-lite-2017-android-t3582179

ChinHon said:
Flash now a Recovery.
https://forum.xda-developers.com/p8...-to-root-huawei-p8-lite-2017-android-t3582179
Click to expand...
Click to collapse
I Can't Flash Anything Cause It's In Error Mode!
When I Enter:-
Fastboot Flash Recovery Pargue.img
It Says:-
Waiting For Device
And Doesn't Do Anything At All !

YSFYoussef480 said:
I Can't Flash Anything Cause It's In Error Mode!
When I Enter:-
Fastboot Flash Recovery Pargue.img
It Says:-
Waiting For Device
And Doesn't Do Anything At All !
Click to expand...
Click to collapse
Take another USB cable and/ or another PC USB port. First connect, then restart the Device with key combi in the bootloader.

ChinHon said:
Take another USB cable and/ or another PC USB port. First connect, then restart the Device with key combi in the bootloader.
Click to expand...
Click to collapse
Tried It
Didn't Work

You do not come to the Recovery also any more?

ChinHon said:
You do not come to the Recovery also any more?
Click to expand...
Click to collapse
Yes But I Let The Device To Drain The Battery Then I Flashed The TWRP Recovery And Flashed The Stock Boot Image After I Flash It It Has A Problem It Goes To eRecovery All The Time But When I Flash The Rooted Boot Image It Boots But I Can't Go To DEV Options Or The Security In Settings

Make now the update from the instructions on the B110. Then everything becomes good.

ChinHon said:
Make now the update from the instructions on the B110. Then everything becomes good.
Click to expand...
Click to collapse
Can You Send Me A TWRP Backup Of Your Current Stock Boot Partition ?!

The restore from the TWRP backup seldom succeeds. Better flash by ADB or Rashr Flash tool apk.
https://mega.nz/#!Flk20Tga!-oQ6I630JHr167R9WfUS7n-zkS2T4ZRf4qtSDZMPkpQ

ChinHon said:
The restore from the TWRP backup seldom succeeds. Better flash by ADB or Rashr Flash tool apk.
https://mega.nz/#!Flk20Tga!-oQ6I630JHr167R9WfUS7n-zkS2T4ZRf4qtSDZMPkpQ
Click to expand...
Click to collapse
I Meant A TWRP Backup For Your Current Stock Boot Partition !!
Not An Image Because It Doesn't Work At All !!
So, Please Can You Send Me A TWRP Backup Of Your Current Boot Partition !!
Or If You Gave Me The TWRP Backup Of The Whole B110 It Will Be Much Appreciated​ !!

Everything what I can offer is in #2. This is a complete backup without datapartition.

HELP! Soft Bricked phone!

So, I installed supersu zip on my twrp recovery and now my phone won’t boot and the screen just starts with N/A and the moto screen flashes and won’t boot up. I can’t find any moto e4 plus (xt1775 owens) firmware anywhere and any help would be appreciated. (7.1.1)

Moto E4 plus xt 1775. Firmware
danieljensen9 said:
So, I installed supersu zip on my twrp recovery and now my phone won’t boot and the screen just starts with N/A and the moto screen flashes and won’t boot up. I can’t find any moto e4 plus (xt1775 owens) firmware anywhere and any help would be appreciated. (7.1.1)
Click to expand...
Click to collapse
I have that phone, actually I soft bricked my first one the same way and managed to get another. If you can explain to me how I can get an image of it , I'd be glad to send it to you. I was just about to unlock the bootloader

autodoc88 said:
I have that phone, actually I soft bricked my first one the same way and managed to get another. If you can explain to me how I can get an image of it , I'd be glad to send it to you. I was just about to unlock the bootloader
Click to expand...
Click to collapse
if you have an unlocked bootloader and rooted device than do this in terminal emulator app
dd=if /dev/block/bootdevice/by-name/system of=/sdcard/system.img
this will backup your device system in image format.

autodoc88 said:
I have that phone, actually I soft bricked my first one the same way and managed to get another. If you can explain to me how I can get an image of it , I'd be glad to send it to you. I was just about to unlock the bootloader
Click to expand...
Click to collapse
That would be amazing. What I need is the boot.img if any of you knows how to extract it. It was corrupted by a systemless root. I believe that you can do a nandroid backup of the boot with twrp. Just to make it clear mine is the US qualcomm model. Not the mediatek. https://forum.xda-developers.com/moto-e4/development/twrp-twrp-moto-g4-qualcomm-t3655160 DO NOT USE fastboot flash USE fastboot boot!

danieljensen9 said:
That would be amazing. What I need is the boot.img if any of you knows how to extract it. It was corrupted by a systemless root. I believe that you can do a nandroid backup of the boot with twrp. Just to make it clear mine is the US qualcomm model. Not the mediatek. https://forum.xda-developers.com/moto-e4/development/twrp-twrp-moto-g4-qualcomm-t3655160 DO NOT USE fastboot flash USE fastboot boot!
Click to expand...
Click to collapse
OH WOW....thats where the problem is damn wrong partition command , i did that yesterday, feel like a idiot now... so do we have a correct boot.img? xt1775 owens.
---------- Post added at 05:38 PM ---------- Previous post was at 05:36 PM ----------
neilc300 said:
OH WOW....thats where the problem is damn wrong partition command , i did that yesterday, feel like a idiot now... so do we have a correct boot.img? xt1775 owens.
Click to expand...
Click to collapse
in my own defense i was following instructions to the T ....Lol

Unlocked bootloader yes, no root.
Francesco Franz said:
if you have an unlocked bootloader and rooted device than do this in terminal emulator app
dd=if /dev/block/bootdevice/by-name/system of=/sdcard/system.img
this will backup your device system in image format.
Click to expand...
Click to collapse
I do have that device, xt 1775, I haven't been able to get a twrp image to flash ,so I can root it . If anyone has it or knows elwhere I can find it ? I'd be happy to send you the boot image

autodoc88 said:
I do have that device, xt 1775, I haven't been able to get a twrp image to flash ,so I can root it . If anyone has it or knows elwhere I can find it ? I'd be happy to send you the boot image
Click to expand...
Click to collapse
i have both boot.img and recovery.img of xt1775 but your device recovery partition is smaller.

autodoc88 said:
I do have that device, xt 1775, I haven't been able to get a twrp image to flash ,so I can root it . If anyone has it or knows elwhere I can find it ? I'd be happy to send you the boot image[/QUOTE
i can flash twrp[ but i can't boot to anything except fastboot which is way better than nothing, i flashed some boot.img using flash command instead of boot command i guess it wiped the boot partition error says failure to load kernel. so you have the device and you need the working twrp?
---------- Post added at 10:20 PM ---------- Previous post was at 10:16 PM ----------
Francesco Franz said:
i have both boot.img and recovery.img of xt1775 but your device recovery partition is smaller.
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-e4-plus/development/recovery-twrp-3-1-1-moto-e4-plus-t3682180
this is the one i used and it worked i did not see the boot link there till just now im gonna try ir now. you know how to flash thru fastboot right?
Click to expand...
Click to collapse

Yes I know how to flash ,but how do I boot to recovery that's not flashed
I need more knowledge then I have at present and it blows

danieljensen9 said:
So, I installed supersu zip on my twrp recovery and now my phone won’t boot and the screen just starts with N/A and the moto screen flashes and won’t boot up. I can’t find any moto e4 plus (xt1775 owens) firmware anywhere and any help would be appreciated. (7.1.1)
Click to expand...
Click to collapse
Go here: https://forum.xda-developers.com/showthread.php?t=2239421
Download the unsu script zip and flash it with twrp and then you should be able to flash Magisk v14.2 or phh's superuser. Supersu will not work with the E4 or E4 plus at the present time. Especially not the system install versions.
---------- Post added at 08:23 AM ---------- Previous post was at 08:12 AM ----------
autodoc88 said:
I need more knowledge then I have at present and it blows
Click to expand...
Click to collapse
Open a terminal in whatever folder you have the recovery on your pc and you can boot the recovery with
Code:
fastboot boot recovery twrp.img (or what ever the recovery is named)
this will boot your device to the recovery instead of flashing the recovery to the device. You can use the recovery just the same as if it were installed.

bricked
My phone xt1766 is bricked by flashing wring firmware on pc showinh qhs usb dload and unable to power on...
please help

danieljensen9 said:
So, I installed supersu zip on my twrp recovery and now my phone won’t boot and the screen just starts with N/A and the moto screen flashes and won’t boot up. I can’t find any moto e4 plus (xt1775 owens) firmware anywhere and any help would be appreciated. (7.1.1)
Click to expand...
Click to collapse
You probably need to flash a no-verity-opt-enctypt.zip and retry booting.
Here's the original Back to stock thread;
https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-qualcomm-owens-completely-to-t3743441

Lenovo K3 Note loops into TWRP after factory reset, not booting to Android or OS

Hi Guys
My brothers lenovo K3note was runing RR rom and he did factory reset the phone, but now it only goes to TWRP and not booting into the OS
I tried to reinstall the RR rom, it installs normally but after reboot from TWRP, it goes back to TWRP instead of android Os.
What can i do now, please help

any help guys,

skyh3ck said:
Hi Guys
My brothers lenovo K3note was runing RR rom and he did factory reset the phone, but now it only goes to TWRP and not booting into the OS
I tried to reinstall the RR rom, it installs normally but after reboot from TWRP, it goes back to TWRP instead of android Os.
What can i do now, please help
Click to expand...
Click to collapse
Hello mate
Don't worry.. Just wipe system, data and cache and re-install rr rom. The same thing happened to me when i did a factory reset on that ROM.

i did all, it shows as installing but after reboot goes back to TWRP recovery only

change ur twrp recovery, i mean update your twrp recovery and you will never face this problem....

skyh3ck said:
i did all, it shows as installing but after reboot goes back to TWRP recovery only
Click to expand...
Click to collapse
I had the same problem a few days back. I tried everything but at the end, I had to flash the stock ROM using SP Flash Tool. After that, I was able to boot into Stock Android and rooted the phone again and installed the Custom Rom later.

TheRootRiffs said:
I had the same problem a few days back. I tried everything but at the end, I had to flash the stock ROM using SP Flash Tool. After that, I was able to boot into Stock Android and rooted the phone again and installed the Custom Rom later.
Click to expand...
Click to collapse
And from where have you downloaded the stock ROM?

VinayakS said:
And from where have you downloaded the stock ROM?
Click to expand...
Click to collapse
youtube(dot)com/watch?v=TySRc_DkcFk&t=251s
Follow this

TheRootRiffs said:
youtube(dot)com/watch?v=TySRc_DkcFk&t=251s
Follow this
Click to expand...
Click to collapse
Thanks, I have already downloaded from some other URL.

@ skyh3ck and VinayakS
did it help?
My phone got a bootloop to twrp 3.0.2-7 after I wanted to restore to factory settings (from settings menu), I tried flashing 'new' RR-N-v5.8.5-20170926-aio_otfp-FINAL (during flashing I had 2 errors - logs available), tried to flash with some other roms, I tried to restore some old backups - same thing = bootloop to twrp.
I don't want to brick it like the guy from this thread https://forum.xda-developers.com/k3-note/help/help-unbricking-k3-note-k50a40-charging-t3699007

Krzykor said:
@ skyh3ck and VinayakS
did it help?
My phone got a bootloop to twrp 3.0.2-7 after I wanted to restore to factory settings (from settings menu), I tried flashing 'new' RR-N-v5.8.5-20170926-aio_otfp-FINAL (during flashing I had 2 errors - logs available), tried to flash with some other roms, I tried to restore some old backups - same thing = bootloop to twrp.
I don't want to brick it like the guy from this thread https://forum.xda-developers.com/k3-note/help/help-unbricking-k3-note-k50a40-charging-t3699007
Click to expand...
Click to collapse
I did not had time to revert rooting and remove custom recovery, so can't say much at this moment.
But your bootloop issue is most probably due to presence of TWRP, you need to completely remove root & TWRP, restore stock boot and recovery, then try.

VinayakS said:
But your bootloop issue is most probably due to presence of TWRP, you need to completely remove root & TWRP, restore stock boot and recovery, then try.
Click to expand...
Click to collapse
Fortunately I've made it working again.
What I did, I flashed phone with SP FLash Tool 5.1628 and K50a40_S433_160909_ROW https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537. But it was not success at that time. Phone acted weirdly couldn't boot, only vibration after power on could be felt. So I tried to flash only the recovery Lenovo K3 Note Stock Recovery.img 10,2MB (also in the package but not default recovery image for S433) with the scatter map from S433 stockrom but SPFL said that it didn't end successfully, so I flashed only rocovery from stock rom S433 target_bin folder recovery.img 12800kB and then voila, it started to boot, there was a Lenovo logo, took some time to start but eventually phone is working.
Now I want to root it and / or flash correct version because my phone is actually k50-t5 not k50a40.
So thanks and good luck to those with similar problems after restoring factory settings on AIMROM.

same prob happend to me
first time encountering with TWRP loop.
downloading the stock rom
if there is any improvements will update

the solution for this(FIX)
all we need to do is reinstall a stock recovery and the again reinstall the TWRP
https://forum.xda-developers.com/k3-...-note-t3102997
follow this link..my phone just got fixed

nidheeshv said:
all we need to do is reinstall a stock recovery and the again reinstall the TWRP
https://forum.xda-developers.com/k3-...-note-t3102997
follow this link..my phone just got fixed
Click to expand...
Click to collapse
That link is incorrect / not working.

updating
VinayakS said:
That link is incorrect / not working.
Click to expand...
Click to collapse
wait i will update the link now
---------- Post added at 12:05 PM ---------- Previous post was at 11:49 AM ----------
Before proceeding download a stock and TWRP recovery from the link below
https://drive.google.com/file/d/0B2I5z1mFfUpcTUtjWUtpUmFCRWM/view
this is the stock recovery,extract this recovery and paste the contents to a folder named STOCK
https://drive.google.com/file/d/0B2I5z1mFfUpcaE5sZTk3M2Vrc1E/view
this is the TWRP recovery,extract this recovery and paste the contents to a folder named TWRP
1.install adb and fastboot on ur laptop.(am using ububtu 16.04)
2.make the phone to go to TWRP
3.plug in the usb
4.open terminal and type adb devices
5.see if device is detected ,if detected do the following
go to the STOCK rfolder u created and open terminal there.and type the following
adb reboot bootloader
fastboot devices
fastboot flash recovery recovery.img
fastboot reboot
6.Now ur device will have stock recovery.
7.again repeat the above steps instead of STOCK use TWRP recovery.
8.your device will boot up with TWRP recovery build in
---------- Post added at 12:10 PM ---------- Previous post was at 12:05 PM ----------
nidheeshv said:
wait i will update the link now
---------- Post added at 12:05 PM ---------- Previous post was at 11:49 AM ----------
Before proceeding download a stock and TWRP recovery from the link below
https://drive.google.com/file/d/0B2I5z1mFfUpcTUtjWUtpUmFCRWM/view
this is the stock recovery,extract this recovery and paste the contents to a folder named STOCK
https://drive.google.com/file/d/0B2I5z1mFfUpcaE5sZTk3M2Vrc1E/view
this is the TWRP recovery,extract this recovery and paste the contents to a folder named TWRP
1.install adb and fastboot on ur laptop.(am using ububtu 16.04)
2.make the phone to go to TWRP
3.plug in the usb
4.open terminal and type adb devices
5.see if device is detected ,if detected do the following
go to the STOCK rfolder u created and open terminal there.and type the following
adb reboot bootloader
fastboot devices
fastboot flash recovery recovery.img
fastboot reboot
6.Now ur device will have stock recovery.
7.again repeat the above steps instead of STOCK use TWRP recovery.
8.your device will boot up with TWRP recovery build in
Click to expand...
Click to collapse
dont download the files from the below link ,its for a different device ,its just a reference i used
the reference is
http://https://forum.xda-developers.com/oneplus-5/how-to/guide-fix-twrp-recovery-script-loop-t3649727

nidheeshv said:
wait i will update the link now
---------- Post added at 12:05 PM ---------- Previous post was at 11:49 AM ----------
Before proceeding download a stock and TWRP recovery from the link below
https://drive.google.com/file/d/0B2I5z1mFfUpcTUtjWUtpUmFCRWM/view
this is the stock recovery,extract this recovery and paste the contents to a folder named STOCK
https://drive.google.com/file/d/0B2I5z1mFfUpcaE5sZTk3M2Vrc1E/view
this is the TWRP recovery,extract this recovery and paste the contents to a folder named TWRP
1.install adb and fastboot on ur laptop.(am using ububtu 16.04)
2.make the phone to go to TWRP
3.plug in the usb
4.open terminal and type adb devices
5.see if device is detected ,if detected do the following
go to the STOCK rfolder u created and open terminal there.and type the following
adb reboot bootloader
fastboot devices
fastboot flash recovery recovery.img
fastboot reboot
6.Now ur device will have stock recovery.
7.again repeat the above steps instead of STOCK use TWRP recovery.
8.your device will boot up with TWRP recovery build in
Click to expand...
Click to collapse
dont download the files from the below link ,its for a different device ,its just a reference i used
the reference is
http://https://forum.xda-developers.com/oneplus-5/how-to/guide-fix-twrp-recovery-script-loop-t3649727

sudip_55 said:
change ur twrp recovery, i mean update your twrp recovery and you will never face this problem....
Click to expand...
Click to collapse
Exactly the same thing happened to me.
So I tried your idea and updated my TWRP, going from 2.8 to 3.1..1
But exactly the same thing happens - it still bootloops, but to the new TWRP.
I've tried flashing several different ROMs that all worked in the past. But no change.

Salvadorfreeman said:
Exactly the same thing happened to me.
So I tried your idea and updated my TWRP, going from 2.8 to 3.1..1
But exactly the same thing happens - it still bootloops, but to the new TWRP.
I've tried flashing several different ROMs that all worked in the past. But no change.
Click to expand...
Click to collapse
do as what i have mentioned above,..and give update

It worked ! Thanks.
The reason I didn't try it straight away was all the comments about wrong links etc. And some of the links afterwards didn't work. So I was looking for a recovery.img file in other places.
I read your new message, so I used the first link in your post which gave me the recovery img. The TWRP link doesn't seem to work, but I already have an up to date TWRP on the phone.

Flashing Magisk v20 bootloops to recovery

Hello,
I attempted to root my Mi CC9 / 9 Lite and currently have a bootloop.
What I did:
-Flash TWRP from fastboot (success)
-Boot into TWRP (success)
-Wipe / Factory reset (success)
-Flashing Magisk v20 zip file (success)
-Then, reboot system sends me to TWRP again.
What I tried:
-The phone is not bricked. When I factory reset again from TWRP and boot to system, it boots up.
-Signing the boot image after flashing magisk using the zip file here (This did not work. Flashing the zip file returned a verification error)
Not quite sure how to root my phone at this point. Any help would be much appreciated. Thank you.

You need the Enable encryption zip...it will boot it up.. boot loop is cause from MIUI trying to encrypted and failing.
Flash the zip in this thread... go to the fstab zip that will help you
https://forum.xda-developers.com/mi-cc9/development/recovery-twrp-pyxis-unofficial-t3990493

[email protected] said:
You need the Enable encryption zip...it will boot it up.. boot loop is cause from MIUI trying to encrypted and failing.
Flash the zip in this thread... go to the fstab zip that will help you
https://forum.xda-developers.com/mi-cc9/development/recovery-twrp-pyxis-unofficial-t3990493
Click to expand...
Click to collapse
Where do I find it?

dupreme said:
Where do I find it?
Click to expand...
Click to collapse
Direct link from OP.
https://www.mediafire.com/folder/zqk7a9qj5ltyd/Mi 9 Lite (pyxis)

[email protected] said:
Direct link from OP.
https://www.mediafire.com/folder/zqk7a9qj5ltyd/Mi 9 Lite (pyxis)
Click to expand...
Click to collapse
Thank you. I tried flashing the fstab zip after flashing magisk and it did not change the situation. Shall I first flash the auto-decrypt TWRP img and then try again?

dupreme said:
Thank you. I tried flashing the fstab zip after flashing magisk and it did not change the situation. Shall I first flash the auto-decrypt TWRP img and then try again?
Click to expand...
Click to collapse
What I do is this: I Boot in recovery and format data then I go to advance wipe and select data and then repair and select ext4 and swipe and then reboot recovery and flash the MIUI rom and then I reboot the recovery and mount system and vendor and flash the zip and then reboot and wait for it... you know it will boot up because after it boots up the bootanimation increases it's light before the actual booting in the system and the rest you can figure out... hope this helps you out.

[email protected] said:
What I do is this: I Boot in recovery and format data then I go to advance wipe and select data and then repair and select ext4 and swipe and then reboot recovery and flash the MIUI rom and then I reboot the recovery and mount system and vendor and flash the zip and then reboot and wait for it... you know it will boot up because after it boots up the bootanimation increases it's light before the actual booting in the system and the rest you can figure out... hope this helps you out.
Click to expand...
Click to collapse
I'll try that. Thanks a lot. Do you use the auto-decrypt (the one you linked) TWRP in this, or just regular TWRP. I am using just the pyxis TWRP.

Can anyone elaborate on what needs to be done? The previous responses did not explain how to ROOT the phone.
What I have just tried:
-flashed the TWRP img here
-did a wipe
-sent Magisk and the fstab zips to storage and flashed them (fstab first)
still gives bootloop to recovery. How to root this phone?
Thank you

dupreme said:
Can anyone elaborate on what needs to be done? The previous responses did not explain how to ROOT the phone.
What I have just tried:
-flashed the TWRP img here
-did a wipe
-sent Magisk and the fstab zips to storage and flashed them (fstab first)
still gives bootloop to recovery. How to root this phone?
Thank you
Click to expand...
Click to collapse
After you unlock the bootloader I just put it in fastboot mode and fastboot boot "(whatever you have it called... I renamed it recovery) recovery.img and then press the volume up button and then I install the image through TWRP and reboot recovery and then follow the steps.
---------- Post added at 04:07 PM ---------- Previous post was at 04:06 PM ----------
dupreme said:
I'll try that. Thanks a lot. Do you use the auto-decrypt (the one you linked) TWRP in this, or just regular TWRP. I am using just the pyxis TWRP.
Click to expand...
Click to collapse
I used the TWRP for the team win recovery project website.
---------- Post added at 04:25 PM ---------- Previous post was at 04:07 PM ----------
dupreme said:
Can anyone elaborate on what needs to be done? The previous responses did not explain how to ROOT the phone.
What I have just tried:
-flashed the TWRP img here
-did a wipe
-sent Magisk and the fstab zips to storage and flashed them (fstab first)
still gives bootloop to recovery. How to root this phone?
Thank you
Click to expand...
Click to collapse
Fstab zip is last because it's the encryption fix

[email protected] said:
After you unlock the bootloader I just put it in fastboot mode and fastboot boot "(whatever you have it called... I renamed it recovery) recovery.img and then press the volume up button and then I install the image through TWRP and reboot recovery and then follow the steps.
---------- Post added at 04:07 PM ---------- Previous post was at 04:06 PM ----------
I used the TWRP for the team win recovery project website.
---------- Post added at 04:25 PM ---------- Previous post was at 04:07 PM ----------
Fstab zip is last because it's the encryption fix
Click to expand...
Click to collapse
I tried a combination of what you suggested and this guide and the phone booted up with root. However, opening the Magisk manager immediately says "your device needs additional setup" or something similar, and asks to flash a zip file. When I select flash, it says rebooting in 5 sec and stays in bootloop. Have you come across this?

use twrp by brigudav. It has also s built-in Magisk installer.

JimmyBondi said:
use twrp by brigudav. It has also s built-in Magisk installer.
Click to expand...
Click to collapse
Can you share a link? I could not find an XDA thread. Thank you.

dupreme said:
I tried a combination of what you suggested and this guide and the phone booted up with root. However, opening the Magisk manager immediately says "your device needs additional setup" or something similar, and asks to flash a zip file. When I select flash, it says rebooting in 5 sec and stays in bootloop. Have you come across this?
Click to expand...
Click to collapse
TBH no because as Soon as I got TWRP I flash another rom Mi Globe rom to be exact and use the method I posted.