Stuck in boot up screen - X 2014 Q&A, Help & Troubleshooting

ok, i am stuck on my boot up screen. i flashed a zip file xposed arm zip. after the reboot it will not pass the boot animation screen. now on my old Motorola phone, i would do the pwr + vol keys to boot back in to recovery. well this does no work on my X. any one have any ideas. I am rooted, unlocked, twrp was installed from play store, & i did do a back up. thanks

JWACK72 said:
ok, i am stuck on my boot up screen. i flashed a zip file xposed arm zip. after the reboot it will not pass the boot animation screen. now on my old Motorola phone, i would do the pwr + vol keys to boot back in to recovery. well this does no work on my X. any one have any ideas. I am rooted, unlocked, twrp was installed from play store, & i did do a back up. thanks
Click to expand...
Click to collapse
What device do you have, XT1095, XT1097, etc? And you are not able to boot into the bootloader using vol down + power correct?

It was a 1096, now its trash. it would go into fastboot, but could not get into twrp recovery. its done. RIP

JWACK72 said:
It was a 1096, now its trash. it would go into fastboot, but could not get into twrp recovery. its done. RIP
Click to expand...
Click to collapse
If it boots to fastboot, it's not dead. Just reflash the recovery and you're good to go.
Sent from my XT1095 using Tapatalk

Was there a resolution for this? I'm having a similar problem. I'm not sure how I got to this status, but here's what I'm dealing with:
Device: XT1095
Bootloader: Unlocked
Rooted, ROM - Resurrection Remix, TWRP
Turning on the phone reaches the RR bootsplash and proceeds to bootloop.
When holding down the power and volume down, it will enter fastboot.
When I try to open TWRP recovery, it'll show the blue TWRP screen and just sit there.
I have tried to reinstall TWRP, but that has no effect. I didn't want to manually flash another ROM or go back to stock because at least now it seems USB debugging is on and if I flashed a ROM I cant be sure I'd be able to turn it on. Do any of you pros have some ideas hove I can get back into my phone? Thanks

bibbin said:
I have tried to reinstall TWRP, but that has no effect. I didn't want to manually flash another ROM or go back to stock because at least now it seems USB debugging is on and if I flashed a ROM I cant be sure I'd be able to turn it on. Do any of you pros have some ideas hove I can get back into my phone? Thanks
Click to expand...
Click to collapse
Do you have a USB-OTG device plugged in while trying to start TWRP? If so remove it, you can mount it after TWRP starts if this helps.
Have you tried a different build of TWRP? I'm currently using the one built by invisiblek, one of the CM devs for the victara. It was built and posted on December 8th and is here: http://www.invisiblek.org/twrp/twrp_2.8.7.0-0624b8bd_victara.img
Have you tried flashing the stock recovery to see if that will start? If it does, you could use the factory reset option there and then try reinstalling TWRP. (TWRP has a settings directory in /sdcard and maybe that is corrupted.)
There have been a few people posting with this problem but I've not seen a definitive fix for it.

Thank for the quick response. No, I don't have USB-OTG inserted. It is using TWRP 2.8.7.1. No, I haven't tried installing the version you mentioned. What I did do was attempt to flash the pre-installed TWRP 2.8.1.0 via MOTO X TOOLKIT. It failed. I'm not very experienced at using ADB manually. As I mentioned, I've been reluctant to flash another ROM (custom or stock) because I don't want to get stuck with USB debugging inactive with no way to get in far enough to reactivate it.
---------- Post added at 04:32 PM ---------- Previous post was at 03:40 PM ----------
If I manage to install the invisiblek TWRP and it opens properly will I then be able to restore the backups created with TWRP 2.8.7.1?
If that's the case, I need to find a tutorial on installing TWRP manually via ADB, right? I usually install TWRP via TWRP Manager.

bibbin said:
Thank for the quick response. No, I don't have USB-OTG inserted. It is using TWRP 2.8.7.1. No, I haven't tried installing the version you mentioned. What I did do was attempt to flash the pre-installed TWRP 2.8.1.0 via MOTO X TOOLKIT. It failed. I'm not very experienced at using ADB manually. As I mentioned, I've been reluctant to flash another ROM (custom or stock) because I don't want to get stuck with USB debugging inactive with no way to get in far enough to reactivate it.
---------- Post added at 04:32 PM ---------- Previous post was at 03:40 PM ----------
If I manage to install the invisiblek TWRP and it opens properly will I then be able to restore the backups created with TWRP 2.8.7.1?
If that's the case, I need to find a tutorial on installing TWRP manually via ADB, right? I usually install TWRP via TWRP Manager.
Click to expand...
Click to collapse
That's interesting, the TWRP Manager has never worked correctly for me although it's been a long time since I've tried it.
To flash manually, you actually need fastboot which is usually installed along with adb. If you open a command window, and type in fastboot and it runs, the rest is pretty easy. If it doesn't run, this thread has the 15 second ADB/Fastboot installer, select to install it system-wide: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Download the recovery image, rename the file to twrp.img, then open a command window in the folder where you downloaded it (type cmd then Enter in the address line at the top of the folder window.)
When the command window is open and the phone is in bootloader mode and connected to the computer with the USB cable, enter the command "fastboot device" (without the quotes) If everything is working it will list the serial number of your phone.
Then enter "fastboot flash recovery twrp.img" (without the quotes) to start the flashing process, ignore the size mismatch message. It will only take a few seconds to complete.
Use the volume down key to highlight recovery, then volume up to select it. Hopefully TWRP will boot up and you'll be good to go!

Well, reinstalling TWRP didn't fix it. Thoughts? Anyone?

bibbin said:
Well, reinstalling TWRP didn't fix it. Thoughts? Anyone?
Click to expand...
Click to collapse
Reflash stock rom from fastboot.
Sent from my XT1095 using Tapatalk

UPDATE: Thanks all. Well, after fiddling around with various methods of reinstalling TWRP, I managed to get it reinstalled and all is back to normal now.

Related

Possible Bricked Phone

I am really hoping someone can be of some assistance to me, today i managed to unlock the bootloader, install TWRP and root the phone, i then stupidly downloaded and installed a boot animation from ROM Toolbox lite and went to TWRP and tried to flash it, it came up failed, tried to reboot but it only boots into recovery, tried wiping cache, dalvik cache, factory reset,system and format data and still it only boots into recoverywebt to advanced tried to install it said HTC Dumlock is installed but still boots into recovery,tried reflash to recovery abd restore original boot but still it wont boot up as normal, how can i get the phone to just boot up normally does anyone know?
I am such a twat im usually fairly careful when it comes to this type of thing, it'll be a nightmare if i have to pay to leave it into to get done.
Calm flash a custom rom after a full reset and it should work
If you're having issues putting a rom on your device it's possible through adb sideload with the AIO Toolkit
---------- Post added at 02:43 PM ---------- Previous post was at 02:42 PM ----------
If you do a factory reset, you remove the Rom element so ideally as I previously mentioned flash a new Rom problem solved
jonny68 said:
I am really hoping someone can be of some assistance to me, today i managed to unlock the bootloader, install TWRP and root the phone, i then stupidly downloaded and installed a boot animation from ROM Toolbox lite and went to TWRP and tried to flash it, it came up failed, tried to reboot but it only boots into recovery, tried wiping cache, dalvik cache, factory reset,system and format data and still it only boots into recoverywebt to advanced tried to install it said HTC Dumlock is installed but still boots into recovery,tried reflash to recovery abd restore original boot but still it wont boot up as normal, how can i get the phone to just boot up normally does anyone know?
I am such a twat im usually fairly careful when it comes to this type of thing, it'll be a nightmare if i have to pay to leave it into to get done.
Click to expand...
Click to collapse
Yeah you need to flash a custom rom - you've wiped system so it won't ever boot no matter how many times you try otherwise
fkofilee said:
Calm flash a custom rom after a full reset and it should work
If you're having issues putting a rom on your device it's possible through adb sideload with the AIO Toolkit
---------- Post added at 02:43 PM ---------- Previous post was at 02:42 PM ----------
If you do a factory reset, you remove the Rom element so ideally as I previously mentioned flash a new Rom problem solved
Click to expand...
Click to collapse
Thanks mate can you be a little bit more specific as to how i can put a ROM on the phone as ive never heard of that AIO toolkit?
If you enter CWM recovery, theres an option called install zip from sideload. Press that and then plug it into your PC, and in CMD type
Code:
adb sideload <location of rom.zip on PC>
I use TWRP i assume that has the same adb sideload?
I am downloading Android Revolution now, so if i create a folder on C drive called c:\android then the ROM is the the img i flash when i open a command?
jonny68 said:
I use TWRP i assume that has the same adb sideload?
I am downloading Android Revolution now, so if i create a folder on C drive called c:\android then the ROM is the the img i flash when i open a command?
Click to expand...
Click to collapse
I presume, I've never used TWRP and yeah correct.
OK i am in ADB sideload now when i open a command and type adb sideload i do not know what else to type, i have saved both the boot img and the full zip file (Android Revolution) in the c:\android folder?
When you type adb devices does your phone show up? Have you installed the correct drivers
MacHackz said:
When you type adb devices does your phone show up? Have you installed the correct drivers
Click to expand...
Click to collapse
see the attached, i aloso tried to drag and drop the boot img to the command window and it wouldnt work, then tried the Android Revolution ZIP and it prompts me to use winrar, wtf am i doinf wrong, all i need to know do i use the boot img or the actual full zip file and i need to know what the exact location to type, i created a folder on c drive called android.
I am in an internet cafe too so i cant stay all day just another hour or so.
thanks
I am gonna have to leave it for now as its doing my head in, i wouldn be grateful if someone could post some specific instructions later and ill attempt it tomorrow, everything appears to be ok when i type cmd then
cd c:\android
adb sideload (what is thew exact name of the file i need to enter)
In the folder 'Android' which you cd'd to, is there adb.exe? And you dont use .img you link to the actual rom zip.
jonny68 said:
I am really hoping someone can be of some assistance to me, today i managed to unlock the bootloader, install TWRP and root the phone, i then stupidly downloaded and installed a boot animation from ROM Toolbox lite and went to TWRP and tried to flash it, it came up failed, tried to reboot but it only boots into recovery, tried wiping cache, dalvik cache, factory reset,system and format data and still it only boots into recoverywebt to advanced tried to install it said HTC Dumlock is installed but still boots into recovery,tried reflash to recovery abd restore original boot but still it wont boot up as normal, how can i get the phone to just boot up normally does anyone know?
I am such a twat im usually fairly careful when it comes to this type of thing, it'll be a nightmare if i have to pay to leave it into to get done.
Click to expand...
Click to collapse
Instructions are in this thread http://forum.xda-developers.com/showthread.php?t=2224536
MacHackz said:
In the folder 'Android' which you cd'd to, is there adb.exe? And you dont use .img you link to the actual rom zip.
Click to expand...
Click to collapse
It was a winrar file (android revolution) I also had the boot. Img so it should actually be a zip file instead I
Sent from my Nexus 7 using xda app-developers app
rayford85 said:
Instructions are in this thread http://forum.xda-developers.com/showthread.php?t=2224536
Click to expand...
Click to collapse
Cheers hopefully I'll have more luck tomorrow
Sent from my Nexus 7 using xda app-developers app
jonny68 said:
Thanks mate can you be a little bit more specific as to how i can put a ROM on the phone as ive never heard of that AIO toolkit?
Click to expand...
Click to collapse
sorry, I'm in panic with the same problem
If I try sideload, I receive this message
* cannot read 'sideload' *
what can I do? I'm like a desperate....
That's a problem wit twrp
Sent from my HTC_Amaze_4G using xda app-developers app
Buddy before anything else could you please put/attach/upload the flashable zip of the bootanimation you got from ROM toolbox?
It is better that we know first what partition it has overwritten so we could distinguish what we need to fix.
I understand that usually the system partition is the culprit but reading from the thread that is all pure guesses. It could be you overwritten a different partition that resulted to this.

Bootloop on chuwi vi10. Please I need help

Hi, I have a bootloop after install xposed on chuwi vi10, I've tried to flash a recovery image trough fastboot and also tried intelandroidfbrl, but I can't get to flash it.
These are the images.
http://es.tinypic.com/view.php?pic=103v311&s=8
http://es.tinypic.com/view.php?pic=bhx8yc&s=8
Please I need help.
fperez76 said:
Hi, I have a bootloop after install xposed on chuwi vi10, I've tried to flash a recovery image trough fastboot and also tried intelandroidfbrl, but I can't get to flash it.
These are the images.
http://es.tinypic.com/view.php?pic=103v311&s=8
http://es.tinypic.com/view.php?pic=bhx8yc&s=8
Please I need help.
Click to expand...
Click to collapse
What Android version are you running? Which files from which thread here on XDA did you install on your device? Your screenshots do not provide enough information.
orville87 said:
What Android version are you running? Which files from which thread here on XDA did you install on your device? Your screenshots do not provide enough information.
Click to expand...
Click to collapse
Hi, thank you for your answer, android kit kat, I've installed a xposed trough an app from the store( Xposed Gel Settings). I've tried the program from this thread: http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096 and install drivers but I can't show my device with command adb device, with fastboot device I can show my device but I get an error during the process to flash the recovery, you can watch it on the image. Thank you.
fperez76 said:
Hi, thank you for your answer, android kit kat, I've installed a xposed trough an app from the store( Xposed Gel Settings). I've tried the program from this thread: http://forum.xda-developers.com/android/development/intel-android-devices-root-temp-cwm-t2975096 and install drivers but I can't show my device with command adb device, with fastboot device I can show my device but I get an error during the process to flash the recovery, you can watch it on the image. Thank you.
Click to expand...
Click to collapse
First of all, Xposed is a great danger for unexperienced users. Do not do some "cool things" to your phone without having a backup of your entire system available.
Hopefully you are able to boot into recovery again and restore your backup. If you do not have a backup, do a factory reset (you will lose all your data, but without a backup available...)
If you are on KitKat, install Xposed directly from here.
You can flash a custom recovery for your device by using an app called Flashify.
So my advice for you: try booting into recovery (if you do not know how: search for "your device name" + "recovery volume key". There should be a key combo available to boot into recovery. If this is not possible, make yourself familiar with flashing a kdz file...
orville87 said:
First of all, Xposed is a great danger for unexperienced users. Do not do some "cool things" to your phone without having a backup of your entire system available.
Hopefully you are able to boot into recovery again and restore your backup. If you do not have a backup, do a factory reset (you will lose all your data, but without a backup available...)
If you are on KitKat, install Xposed directly from here.
You can flash a custom recovery for your device by using an app called Flashify.
So my advice for you: try booting into recovery (if you do not know how: search for "your device name" + "recovery volume key". There should be a key combo available to boot into recovery. If this is not possible, make yourself familiar with flashing a kdz file...
Click to expand...
Click to collapse
Thank you, but my problem is into recovery, when I press and hold power button and +, my device shows me to enter a command with fastboot but when I try to enter in adb mode on windows with cmd my devices doesn't show, with command fastboot my device shows but i can't manage to flash a recovery image for my tablet (the second image), I'm trying to connect with my device trough adb or fastboot on windows, this is my problem. I can't enter to android, remember I've a bootloop and install flashify is not possible.
Finally I found the solution,
Solved. Bootloop on chuwi vi10 after install xposed. No adb or fastboot.
If you can't enter adb or fastboot (remote: unknown command)
You must boot Windows(hold power button and - volume) choose windows with volume buttons and later power button to select.
Boot windows and install ext2fsd http://sourceforge.net/projects/ext2.../Ext2fsd/0.62/
Start the program and you'll see all the partitions. Choose android partition 7gb more or less and ext4 type.
Assign a letter and select the option to mount on the next restart.
Restart windows, now you can enter into the partition on my computer.
Search files called xposed and delete them.
Icon change OS and accept. Boot android normally.
So how to install Xposed on chiwu vi10 without bootloop
rfiore said:
So how to install Xposed on chiwu vi10 without bootloop
Click to expand...
Click to collapse
I want to know this too.... ^.^
you can try this. Couldn't get it to work for me though, I get the same error as the other guy in the thread, but it seems to work for others.
http://techtablets.com/forum/topic/...-guide-on-stock-android-4-4-4-for-chuwi-vi10/
---------- Post added at 02:37 AM ---------- Previous post was at 02:18 AM ----------
lol, okay, spoke too soon. not sure what I did differntly, but I tried it a few more times and it worked. Maybe plug in tablet only after you install the apk? meh. working now, I have xposed.
Enter e fastboot mode through the normar recovery and use ADB to unlock the boot loader, it should work

please help installing twrp

i have followed directions to the best of my knowledge, i had twrp already installed but i wanted to update to 20V i was running 20Q, so i used lgup and did a refurbished option. I am running windows 10, i installed minimal adb, adb recognizes my phone, my phone was unlocked and after doing lg up it stayed unlocked, so i proceed to booting into twrp from fastboot, it does boot into twrp i even installed su V279 and updated it thru google play, my problem is when i go to do fastboot flash recovery xxx.img i get writing recovery failed, even if i flashify it does not install twrp i do get root permission according to su. I havent been able to past that, when i try to reboot into twrp with buttons or application phone shuts down and instead of going to twrp lg logo blinks for a second and then phone restarts to normal operation, what am i doing wrong? i been playing on this for days now, thanks in advance
ps, i even installed the rooted 20V from here still same result, unable to flash twrp
weird but i downloaded twrp for 811-815 thru the phone ap, twrp app and i flashed it with same app and it worked, i have no clue what went on, but i tried different downloads and all fail til just now, thank God!
ok please dont do what i did, twrp did flash but it is for 815, i installed it cause app said it was for both, and it wont let me flash h811 files, will continue to work on it, starting from scratch
beto669 said:
ok please dont do what i did, twrp did flash but it is for 815, i installed it cause app said it was for both, and it wont let me flash h811 files, will continue to work on it, starting from scratch
Click to expand...
Click to collapse
use this one works for both h815-h811 thats waht am using right now..
https://forum.xda-developers.com/showpost.php?p=72468882&postcount=422
as for the recovery.. missing not sure .. but i would KDZ it again and start from scratch using the twrp i gave you in link.
---------- Post added at 09:47 PM ---------- Previous post was at 09:45 PM ----------
UPDATE
i just notice your command is worng to send twrp it should be
fastboot boot twrp.img
not
fastboot flash recovery xxx.img
---------- Post added at 09:47 PM ---------- Previous post was at 09:47 PM ----------
UPDATE
i just notice your command is worng to send twrp it should be
fastboot boot twrp.img
not
fastboot flash recovery xxx.img
Thank you for your suggestion i will try after work. I was able to use fastboot boot twrp.img and it load as it should, but my issues is i want permanent twrp, thats why i did the flash recovery
Sent from my LG-H811 using XDA-Developers Legacy app
problem solved, i tried your twrp and had same issue, it will boot but was not writing to phone, i read somewhere, after unlocking the bootloader to save twrp on the phone and then after booting into twrp with fastboot boot twr.img to use twrp file manager and copy from phone to external sd card, i tried that and it worked! now i have permanent twrp. I believe something happens when i tried to copy the file from my computer to my external sd, either my sd card is not working properly and doesnt write everything or some files just dont get transferred cause i copy and paste using file manager app from phone to sd and didnt work. I'm glad i have twrp back in my phone! Thank you raptorddd for helping
beto669 said:
problem solved, i tried your twrp and had same issue, it will boot but was not writing to phone, i read somewhere, after unlocking the bootloader to save twrp on the phone and then after booting into twrp with fastboot boot twr.img to use twrp file manager and copy from phone to external sd card, i tried that and it worked! now i have permanent twrp. I believe something happens when i tried to copy the file from my computer to my external sd, either my sd card is not working properly and doesnt write everything or some files just dont get transferred cause i copy and paste using file manager app from phone to sd and didnt work. I'm glad i have twrp back in my phone! Thank you raptorddd for helping
Click to expand...
Click to collapse
yes you need to have both files i use minimal adb so i place one in that folder and other in external sd .. or internal. then selecting install and lower it says image. then it ask you to select. then select recovery and flash install. and youll have permanent twrp.
could it be that you use USB 3.0 or win10.? i know that for KDZ and LGUP it has problems.. your welcomed you should try G5 port rom from astrako.:good:
the h811 vaariant.
I could have been usb3 as you said I was using Windows 10, I had no problems with lg up though. And sure I will try the g5 port as soon as I get a chance, thank you again!
Sent from my LG-H811 using XDA-Developers Legacy app

Lenovo K3 Note loops into TWRP after factory reset, not booting to Android or OS

Hi Guys
My brothers lenovo K3note was runing RR rom and he did factory reset the phone, but now it only goes to TWRP and not booting into the OS
I tried to reinstall the RR rom, it installs normally but after reboot from TWRP, it goes back to TWRP instead of android Os.
What can i do now, please help
any help guys,
skyh3ck said:
Hi Guys
My brothers lenovo K3note was runing RR rom and he did factory reset the phone, but now it only goes to TWRP and not booting into the OS
I tried to reinstall the RR rom, it installs normally but after reboot from TWRP, it goes back to TWRP instead of android Os.
What can i do now, please help
Click to expand...
Click to collapse
Hello mate
Don't worry.. Just wipe system, data and cache and re-install rr rom. The same thing happened to me when i did a factory reset on that ROM.
i did all, it shows as installing but after reboot goes back to TWRP recovery only
change ur twrp recovery, i mean update your twrp recovery and you will never face this problem....
skyh3ck said:
i did all, it shows as installing but after reboot goes back to TWRP recovery only
Click to expand...
Click to collapse
I had the same problem a few days back. I tried everything but at the end, I had to flash the stock ROM using SP Flash Tool. After that, I was able to boot into Stock Android and rooted the phone again and installed the Custom Rom later.
TheRootRiffs said:
I had the same problem a few days back. I tried everything but at the end, I had to flash the stock ROM using SP Flash Tool. After that, I was able to boot into Stock Android and rooted the phone again and installed the Custom Rom later.
Click to expand...
Click to collapse
And from where have you downloaded the stock ROM?
VinayakS said:
And from where have you downloaded the stock ROM?
Click to expand...
Click to collapse
youtube(dot)com/watch?v=TySRc_DkcFk&t=251s
Follow this
TheRootRiffs said:
youtube(dot)com/watch?v=TySRc_DkcFk&t=251s
Follow this
Click to expand...
Click to collapse
Thanks, I have already downloaded from some other URL.
@ skyh3ck and VinayakS
did it help?
My phone got a bootloop to twrp 3.0.2-7 after I wanted to restore to factory settings (from settings menu), I tried flashing 'new' RR-N-v5.8.5-20170926-aio_otfp-FINAL (during flashing I had 2 errors - logs available), tried to flash with some other roms, I tried to restore some old backups - same thing = bootloop to twrp.
I don't want to brick it like the guy from this thread https://forum.xda-developers.com/k3-note/help/help-unbricking-k3-note-k50a40-charging-t3699007
Krzykor said:
@ skyh3ck and VinayakS
did it help?
My phone got a bootloop to twrp 3.0.2-7 after I wanted to restore to factory settings (from settings menu), I tried flashing 'new' RR-N-v5.8.5-20170926-aio_otfp-FINAL (during flashing I had 2 errors - logs available), tried to flash with some other roms, I tried to restore some old backups - same thing = bootloop to twrp.
I don't want to brick it like the guy from this thread https://forum.xda-developers.com/k3-note/help/help-unbricking-k3-note-k50a40-charging-t3699007
Click to expand...
Click to collapse
I did not had time to revert rooting and remove custom recovery, so can't say much at this moment.
But your bootloop issue is most probably due to presence of TWRP, you need to completely remove root & TWRP, restore stock boot and recovery, then try.
VinayakS said:
But your bootloop issue is most probably due to presence of TWRP, you need to completely remove root & TWRP, restore stock boot and recovery, then try.
Click to expand...
Click to collapse
Fortunately I've made it working again.
What I did, I flashed phone with SP FLash Tool 5.1628 and K50a40_S433_160909_ROW https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537. But it was not success at that time. Phone acted weirdly couldn't boot, only vibration after power on could be felt. So I tried to flash only the recovery Lenovo K3 Note Stock Recovery.img 10,2MB (also in the package but not default recovery image for S433) with the scatter map from S433 stockrom but SPFL said that it didn't end successfully, so I flashed only rocovery from stock rom S433 target_bin folder recovery.img 12800kB and then voila, it started to boot, there was a Lenovo logo, took some time to start but eventually phone is working.
Now I want to root it and / or flash correct version because my phone is actually k50-t5 not k50a40.
So thanks and good luck to those with similar problems after restoring factory settings on AIMROM.
same prob happend to me
first time encountering with TWRP loop.
downloading the stock rom
if there is any improvements will update
the solution for this(FIX)
all we need to do is reinstall a stock recovery and the again reinstall the TWRP
https://forum.xda-developers.com/k3-...-note-t3102997
follow this link..my phone just got fixed
nidheeshv said:
all we need to do is reinstall a stock recovery and the again reinstall the TWRP
https://forum.xda-developers.com/k3-...-note-t3102997
follow this link..my phone just got fixed
Click to expand...
Click to collapse
That link is incorrect / not working.
updating
VinayakS said:
That link is incorrect / not working.
Click to expand...
Click to collapse
wait i will update the link now
---------- Post added at 12:05 PM ---------- Previous post was at 11:49 AM ----------
Before proceeding download a stock and TWRP recovery from the link below
https://drive.google.com/file/d/0B2I5z1mFfUpcTUtjWUtpUmFCRWM/view
this is the stock recovery,extract this recovery and paste the contents to a folder named STOCK
https://drive.google.com/file/d/0B2I5z1mFfUpcaE5sZTk3M2Vrc1E/view
this is the TWRP recovery,extract this recovery and paste the contents to a folder named TWRP
1.install adb and fastboot on ur laptop.(am using ububtu 16.04)
2.make the phone to go to TWRP
3.plug in the usb
4.open terminal and type adb devices
5.see if device is detected ,if detected do the following
go to the STOCK rfolder u created and open terminal there.and type the following
adb reboot bootloader
fastboot devices
fastboot flash recovery recovery.img
fastboot reboot
6.Now ur device will have stock recovery.
7.again repeat the above steps instead of STOCK use TWRP recovery.
8.your device will boot up with TWRP recovery build in
---------- Post added at 12:10 PM ---------- Previous post was at 12:05 PM ----------
nidheeshv said:
wait i will update the link now
---------- Post added at 12:05 PM ---------- Previous post was at 11:49 AM ----------
Before proceeding download a stock and TWRP recovery from the link below
https://drive.google.com/file/d/0B2I5z1mFfUpcTUtjWUtpUmFCRWM/view
this is the stock recovery,extract this recovery and paste the contents to a folder named STOCK
https://drive.google.com/file/d/0B2I5z1mFfUpcaE5sZTk3M2Vrc1E/view
this is the TWRP recovery,extract this recovery and paste the contents to a folder named TWRP
1.install adb and fastboot on ur laptop.(am using ububtu 16.04)
2.make the phone to go to TWRP
3.plug in the usb
4.open terminal and type adb devices
5.see if device is detected ,if detected do the following
go to the STOCK rfolder u created and open terminal there.and type the following
adb reboot bootloader
fastboot devices
fastboot flash recovery recovery.img
fastboot reboot
6.Now ur device will have stock recovery.
7.again repeat the above steps instead of STOCK use TWRP recovery.
8.your device will boot up with TWRP recovery build in
Click to expand...
Click to collapse
dont download the files from the below link ,its for a different device ,its just a reference i used
the reference is
http://https://forum.xda-developers.com/oneplus-5/how-to/guide-fix-twrp-recovery-script-loop-t3649727
nidheeshv said:
wait i will update the link now
---------- Post added at 12:05 PM ---------- Previous post was at 11:49 AM ----------
Before proceeding download a stock and TWRP recovery from the link below
https://drive.google.com/file/d/0B2I5z1mFfUpcTUtjWUtpUmFCRWM/view
this is the stock recovery,extract this recovery and paste the contents to a folder named STOCK
https://drive.google.com/file/d/0B2I5z1mFfUpcaE5sZTk3M2Vrc1E/view
this is the TWRP recovery,extract this recovery and paste the contents to a folder named TWRP
1.install adb and fastboot on ur laptop.(am using ububtu 16.04)
2.make the phone to go to TWRP
3.plug in the usb
4.open terminal and type adb devices
5.see if device is detected ,if detected do the following
go to the STOCK rfolder u created and open terminal there.and type the following
adb reboot bootloader
fastboot devices
fastboot flash recovery recovery.img
fastboot reboot
6.Now ur device will have stock recovery.
7.again repeat the above steps instead of STOCK use TWRP recovery.
8.your device will boot up with TWRP recovery build in
Click to expand...
Click to collapse
dont download the files from the below link ,its for a different device ,its just a reference i used
the reference is
http://https://forum.xda-developers.com/oneplus-5/how-to/guide-fix-twrp-recovery-script-loop-t3649727
sudip_55 said:
change ur twrp recovery, i mean update your twrp recovery and you will never face this problem....
Click to expand...
Click to collapse
Exactly the same thing happened to me.
So I tried your idea and updated my TWRP, going from 2.8 to 3.1..1
But exactly the same thing happens - it still bootloops, but to the new TWRP.
I've tried flashing several different ROMs that all worked in the past. But no change.
Salvadorfreeman said:
Exactly the same thing happened to me.
So I tried your idea and updated my TWRP, going from 2.8 to 3.1..1
But exactly the same thing happens - it still bootloops, but to the new TWRP.
I've tried flashing several different ROMs that all worked in the past. But no change.
Click to expand...
Click to collapse
do as what i have mentioned above,..and give update
It worked ! Thanks.
The reason I didn't try it straight away was all the comments about wrong links etc. And some of the links afterwards didn't work. So I was looking for a recovery.img file in other places.
I read your new message, so I used the first link in your post which gave me the recovery img. The TWRP link doesn't seem to work, but I already have an up to date TWRP on the phone.

[RECOVERY][X704F][OFFICIAL] TWRP 3.3.X for Lenovo Tab4 10 Plus

Official Downloads
https://twrp.me/lenovo/lenovo_X704F.html
Unofficial Downloads
https://www.androidfilehost.com/?w=files&flid=295687
Changelog for unofficial builds
twrp-3.3.1-0-X704F-20190604-codeworkx.img
- Updated to twrp 3.3.1
- Updated prebuilt kernel
- Removed lenovocust from backup
twrp-3.3.0-0-X704F-20190523-codeworkx.img
- initial build
Sources
Device tree: https://github.com/Teamwin/android_device_lenovo_X704F
Kernel: https://github.com/lenovo-devs/android_kernel_lenovo_msm8953
I've seen you are working with yener90 for this device. His TWRP is valid for F, L and few other variants.
Are you able to let us know if yours is the same? Or still testing and too early to know?
Thank you (I follow you in the OnePlus 5 project too).
Flowah123 said:
I've seen you are working with yener90 for this device. His TWRP is valid for F, L and few other variants.
Are you able to let us know if yours is the same? Or still testing and too early to know?
Thank you (I follow you in the OnePlus 5 project too).
Click to expand...
Click to collapse
That seems to be the case
"TARGET_OTA_ASSERT_DEVICE := TB-X704A,TB-X704F,TB-X704L,TBX704,tb_x704a,tb_x704f,tb_x704l"
(https://github.com/codeworkx/android_device_lenovo_X704F/blob/android-9.0/BoardConfig.mk)
There's official support now.
https://twrp.me/lenovo/lenovo_X704F.html
twrp-3.3.1-0-X704F.img verified working on a new TB-X704V. Everything seems to be working.
---------- Post added at 19:36 ---------- Previous post was at 19:04 ----------
Maybe I spoke too soon.
I tried installing Yener90's Lineage OS 16 image only my TB-X704V device and it failed to boot. That's fine, but then I tried to restore the OEM image that I had backed up previously. Unfortunately, I am not able to get back to a booting system.
black.kahder said:
twrp-3.3.1-0-X704F.img verified working on a new TB-X704V. Everything seems to be working.
---------- Post added at 19:36 ---------- Previous post was at 19:04 ----------
Maybe I spoke too soon.
I tried installing Yener90's Lineage OS 16 image only my TB-X704V device and it failed to boot. That's fine, but then I tried to restore the OEM image that I had backed up previously. Unfortunately, I am not able to get back to a booting system.
Click to expand...
Click to collapse
Look at the other thread. 3.3.0 works as expected. Use the old twrp for my current ROM or wait for the next update, which will support 3.3.0
I don't have experience customizing TWRP images for specific devices, so let me apologize in advance for my n00b questions...
How similar are the x704f and x705f tablets? I'm wondering if it might be possible to use an x704f TWRP image on an x705f. Lenovo recently released a stock ROM for Pie on the x705f. Now I'm finally able to unlock the bootloader. The previous stock ROM would not respond to fastboot oem unlock commands. I was then able to fastboot flash a bootloader image pre patched with Magisk so now the tab is rooted and happy. However, I still feel insecure without TWRP as it seems to be a key tool that I use for emergency ADB access, flashing, and making nandroid backups. How big of a project do you think it would be to make a customized image for the x705f? Do you think that is something where I would have to start from scratch? Or could the x704f image be used as a template that I could easily modify with information specific to the x705f?
Thanks for your time. I truly appreciate any help or advice you can give me on this.
Chaser
on my tb-x704f twrp on starts in landscape orientation. the last version i used was 3.2.3 and here i could use both orientations.
i also can't restore an backup because i can't write to the system partition. can this https://forum.xda-developers.com/showpost.php?p=79681018&postcount=259 fix the problem?
gene2 said:
i also can't restore an backup because i can't write to the system partition. can this https://forum.xda-developers.com/showpost.php?p=79681018&postcount=259 fix the problem?
Click to expand...
Click to collapse
No, it won't, it's a magisk module that allows R/W to the system partition after boot up to
facilitate some apps. that require it for full root access.
The problem was that i had no r/w to system partition. the restore works, but the system doesn't start. i have a boot loop with the lenovo logo. i have wiped dalvik, cache and system. after that i also made the normal wipe. then i restored the backup and after restart i have the boot loop. is there anything more to do? this was all i have to do on my other devices.
gene2 said:
The problem was that i had no r/w to system partition. the restore works, but the system doesn't start. i have a boot loop with the lenovo logo. i have wiped dalvik, cache and system. after that i also made the normal wipe. then i restored the backup and after restart i have the boot loop. is there anything more to do? this was all i have to do on my other devices.
Click to expand...
Click to collapse
Sounds like encryption is compromised, restore stock ROm, re-boot and start again.
See my other post to you here:-
https://forum.xda-developers.com/showpost.php?p=80273515&postcount=5
Hello, I have tried TWRP for TB-X704F on TB-X704A, but though my bootloader is unlocked, I have the latest SDK tools, and fastboot flash recovery recovery.img seems to take, nothing I do causes the device to boot into TWRP. I cannot sideload lineagos using stock recovery, and so for now I seem to be stuck. Any suggestions? I'd like to move past Android 7.1 for a more secure OS.
I've had the EXACT same problem with a TB-X704A. I've been waiting for someone else to say so. I'm sorry I don't have a solution but I'm hoping someone more knowledgeable then me sees our problem. Thanks to everyone, especially codeworkx who does this stuff!
Mddaddy said:
Hello, I have tried TWRP for TB-X704F on TB-X704A, but though my bootloader is unlocked, I have the latest SDK tools, and fastboot flash recovery recovery.img seems to take, nothing I do causes the device to boot into TWRP. I cannot sideload lineagos using stock recovery, and so for now I seem to be stuck. Any suggestions? I'd like to move past Android 7.1 for a more secure OS.
Click to expand...
Click to collapse
You have to reboot to recovery manually not via fastboot. Unplug from pc and hold power and volume up it should boot into twrp this way cus f version should work
---------- Post added at 04:02 AM ---------- Previous post was at 03:55 AM ----------
kirknado18 said:
You have to reboot to recovery manually not via fastboot. Unplug from pc and hold power and volume up it should boot into twrp this way cus f version should work
Click to expand...
Click to collapse
Twrp for tb x704f should work on all 704 versions but you have to boot into recovery manually not through adb fastboot it wont boot up that way for some reason. Let me know if this solves the problem.
I wanted to update from LineageOS 16 to LineageOS 17. Instructions there say to upgrade to latest TWRP (https://forum.xda-developers.com/th...m-lineageos-17-0-lenovo-tab4-10-plus-t4016705). I downloaded the unofficial twrp-3.3.1-0-X704F-20190604-codeworkx.img, flashed using adb, but when trying to go into recovery mode - will not go into recovery. Tries, then reboots again, and goes into LineageOS 16.
Downloaded the "official" version form (https://dl.twrp.me/X704F/), version twrp-3.4.0-0-X704F.img, again flashed using adb - again same results. Cannot get into recovery mode, boots twice and goes back into LineageOS 16.
So - something didn't go quite right - how do I get into recovery mode?
tundrwd said:
I wanted to update from LineageOS 16 to LineageOS 17. Instructions there say to upgrade to latest TWRP (https://forum.xda-developers.com/th...lineageos-17-0-lenovo-tab4-10-plus-t4016705). I downloaded the unofficial twrp-3.3.1-0-X704F-20190604-codeworkx.img, flashed using adb, but when trying to go into recovery mode - will not go into recovery. Tries, then reboots again, and goes into LineageOS 16.
Downloaded the "official" version form (https://dl.twrp.me/X704F/), version twrp-3.4.0-0-X704F.img, again flashed using adb - again same results. Cannot get into recovery mode, boots twice and goes back into LineageOS 16.
So - something didn't go quite right - how do I get into recovery mode?
Click to expand...
Click to collapse
Unplug from USB. Hold power and volume up buttons until the bootloader loads. Use the volume rocker to select "Recovery mode". Press power button to confirm.
jfaheyfan said:
Unplug from USB. Hold power and volume up buttons until the bootloader loads. Use the volume rocker to select "Recovery mode". Press power button to confirm.
Click to expand...
Click to collapse
I'm aware of how to get into recovery - it WON'T go into recovery. Starts up, the Moto screen flashes, it reboots, Moto screen again, then loads LineageOS. So I simply cannot get into recovery once selecting "Recovery Mode".
tundrwd said:
I'm aware of how to get into recovery - it WON'T go into recovery. Starts up, the Moto screen flashes, it reboots, Moto screen again, then loads LineageOS. So I simply cannot get into recovery once selecting "Recovery Mode".
Click to expand...
Click to collapse
What model is your tablet?
I have an A model and an F model. I've used the same TWRP on both the A and F. This particular instance is just the A model - TBX-704A
tundrwd said:
I have an A model and an F model. I've used the same TWRP on both the A and F. This particular instance is just the A model - TBX-704A
Click to expand...
Click to collapse
You're not the first:
https://forum.xda-developers.com/showpost.php?p=81254945&postcount=12
https://forum.xda-developers.com/showpost.php?p=82183753&postcount=13
Not sure of the significance, but "Moto" doesn't appear in the boot sequence of my TB-X704N (changed to TB-X704L after I installed LOS 17.1). I get "Lenovo" in an orange rectangle.
My next step would be to try https://dl.twrp.me/X704F/twrp-3.3.1-0-X704F.img . Better yet would be to hear from someone who's installed LOS 17.1 on an "A" model.
---------- Post added at 08:03 PM ---------- Previous post was at 07:42 PM ----------
I installed TWRP 3.4.0 on my TB-X704N (Chinese Tab 4 10+ with 4G) three weeks ago. I went on to install LOS 17.1 (https://forum.xda-developers.com/th...7-0-lenovo-tab4-10-plus-t4016705/post81141501). Everything went well just by following instructions. Thank you, codeworkx!

Categories

Resources