Database Develop

[ROOT] Any stock rom step by step with Mobile Odin Pro (Noob Proof)

I think most people want their android phone get rooted. And should do flash step carefully.
I'm noob too. So, I'm make some step by step to get you to your goal without any worry. (If you have mobile odin pro of cause)
1. Download this 4 package
- ODIN 1.85 for Windows
- Sheep Rom v2.2 (You can flash this rom with odin with out any flash counter and it's build-in root)
- Mobile Odin FlashKernel for Note (will need this for your Mobile Odin Pro)
- Kies (You need this package from Sammy to install Mobile driver for you)
- Stock Rom by your choice
2. Make your phone into download mode by press and hold "Volume Down + Home + Power" until you see screen with yellow sign (Don't panic this is not legendary flash counter sign )
3. Press "Vol Up" to continue You'll see green android mascot.
4. Unzip "ODIN" package and "Sheep Rom" then Install "Kies"
5. Run ODIN with Odin3 v1.85.exe
6. You will see something like this. Connect your phone to PC with USB cable (program status become yellow when you connected to PC) (If Kies try to start just cancle and close it)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Click on PDA PHONE and CSC button and choose file like in picture.
8. Click Start (This process take some time becareful to not shutdown your PC while flashing)
9. Status will show "PASS" in green This means you're good to go. You can unplug your USB cable now. (You mobo will automtically reboot)
10. Wait your mobo to reboot. (this'll take for awhile than normal boot don't panic) (You can close ODIN program now.)
11. If you can boot normally then you're good to go. Just Install Mobile Odin and FlashKernel package.
12. Move new stock rom you want to flash to Build-in SDCARD by connect your mobo phone with USB cable. (New portable device name GT-N7000 will show. If it's not just try reconnect again)
13. Double click on it. You'll see Build-in SDCARD drive name "Phone" just double click again. (Your current path shoud be look like this "Computer\GT-N7000\Phone")
14. Unzip stock_rom.zip. Then copy file .tar.mp5 to that drive "ETC. N7000DXLA1_N7000OLBKL2_N7000DXKL2_HOME.tar.md5" Wait to complete then close explorer.
15. back to your phone open mobile odin you'll see some thing like this.
16. choose Open file .... then choose you file .tar.mp5 (if you put it like I'm told. it should be on lowest screen.)
17. Ever Root will automatically checked (Ever Root is needed to automatically root your stock rom)
18. Press Flash Firmware... then wait and enjoy our new rooted stock rom.

ROOT and CWM recovery on galaxy 2 7 3113 easily

hey guys i was looking for rooting my galaxy tab 3113 and found simple and easy way in other forum ....I dont know if its allowed But m posting it out here...it work as charm for me ..hope u like it
notice :i just copy paste link no responsible for any damage or loss!!!
Download imnuts' espresso_recovery.tar.md5
(Use if your GT2 came with UEALCB firmware and it has been updated OTA to UEALD3 firmware, or you're running UEALD3 and not sure if it was updated OTA.)
Download xoomdev's espressowifi-recovery-5-18.tar.md5
(Use if your GT2 is currently running UEALCB firmware or came with UEALD3 firmware out of the box.)
Download nycbjr's cwm-root-gtab2.zip
Download Odin3-v1.85_3.zip
Download Samsung Drivers (Not required if you have already installed Samsung Kies)
Copy cwm-root-gtab2.zip to the ROOT of your sdcard ( /mnt/extSdCard ). This is the sdcard in the slot. The /mnt/sdcard folder is in the internal memory and won't be recognized in recovery.
Turn off your tablet and restart it in download mode by pushing and holding down the Power and Volume DOWN buttons at the same time. Push the Volume UP to get into download mode. Don't plug the tablet into the computer yet.
If you installed Samsung's Kies software, make sure it is closed and not running.
Extract Odin3 v1.85.exe and run it.
Connect the tablet to the computer.
The first box under ID:COM will be yellow and shows the current com port you are connected to. If you can't connect, try another USB port.
In Odin, click the PDA button. Select the espresso_recovery.tar.md5 or espressowifi-recovery-5-18.tar.md5 file you downloaded and click the START button. Let Odin do it's thing. When it's done, the tablet will reboot.
Disconnect the tablet from the computer. Turn the tablet off and restart it in recovery mode by pushing and holding the Power and Volume UP buttons at the same time.
Once you are in recovery, use the volume button to move around and the power button to select an option. Select install zip from sdcard. Choose the cwm-root-gtab2.zip file you already copied to the root of the sdcard.
When the rooting is finished, choose reboot system now in the recovery menu.
That's it. If everything went well, you should now be rooted.
original link : rootzwiki
All credit goes to:
xoomdev for the CWM Recovery
nycbjr for the CWM Root
jcase for the Unsecured Boot Images
imnuts for packaging jcase's UEALD3 unsecured boot image with xoomdev's (5/19) CWM recovery for use in Odin. (See this thread)

Does this work on this firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
swaggedout GT-P3113

dswaggz said:
Does this work on this firmware
swaggedout GT-P3113
Click to expand...
Click to collapse
No, it doesent.
You can try it, but you get stock recovery ,
If you succeed,, please post.

Tried a thousand times can I hard reset to before update?
Sent from my GT-P3113 using xda app-developers app

Problem solved :thumbup: http://rootzwiki.com/index.php?/topic/25228-[How-To]-Rooting-GT-P3113-Step-by-Step-(Updated-05/24/12)
swaggedout GT-P3113

This?
Sent from my GT-P3113 using Tapatalk 2

[Q] switch to 4.2.2 ROM

Hi Guys.
This is my current ROM, It works OK but I think its time to upgrade
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I want to upgrade to 4.2.2 rom but I have few questions first:
1. I know that I need to install CF-ROOT first, does THIS one feat for me?
2. after I install the CF-ROOT I can flash with the regular instructions right?
(Wipe data / factory reset, wipe cache , Advanced-> Wipe dalvik cache,Install zip from sd card -> Choose Zip from SD card and choose the ROM)
Thanks,.

asher_pa said:
Hi Guys.
This is my current ROM, It works OK but I think its time to upgrade
I want to upgrade to 4.2.2 rom but I have few questions first:
1. I know that I need to install CF-ROOT first, does THIS one feat for me?
2. after I install the CF-ROOT I can flash with the regular instructions right?
(Wipe data / factory reset, wipe cache , Advanced-> Wipe dalvik cache,Install zip from sd card -> Choose Zip from SD card and choose the ROM)
Thanks,.
Click to expand...
Click to collapse
Yes,
as a general rule please follow the opening post of the thread (f.i. Cyanogenmod 10.1).

Thanks popho but in 10.1 say:
Root your device and install ClockworkMod Recovery.
Click to expand...
Click to collapse
Anyhow, what I want to know which kernel should I use from THIS thread to root & install CWM - I can't find there "JVG" version
Thanks.

...

First download the 4.2.2 rom that u choose and copy the .zip on the sdcard in the phone then flash semaphore kernel with Odin and you have root and CWM.
How to do that :
Download the tar file containing the kernel from here.
Start Odin application
Select the tar file as PDA (do NOT select Re-Partition)
Put the phone in download mode
Connect your phone through USB to your PC and wait for the ID:COM to become yellow
Press start button
Then pres volume up+home button+power button to enter CWM recovery
From there erase everything and install i guess CM 10.1 it's ok.
I hope it helps!

Root your S5 (CF-Auto Root)

Samsung Electronics Co Ltd’s (KRX:005935) new Galaxy S5 smartphone can now be rooted using the CF-Auto-Root tool, developed by Chainfire, a recognized member of the XDA Developers forum.
Rooting a device allows users to get complete access to the device’s operating system to make changes to the file systems. In order to root the Galaxy S5 running on the latest Android 4.4.2 KitKat, users are required to flash the CF-Auto-Root file in the smartphone.
Users will have to download the appropriate CF-Auto-Root package for their Galaxy S5 models. Users can check the model number by going to Settings > About phone > Model number.
Here are the download links to CF-Auto-Root packages:
Points To Remember Before Rooting
- Users are recommended to back-up all data before rooting the device
- The device should have at least 80 percent charge left on the battery
- USB drivers must be installed on the computer with USB Debugging enabled on the device to transfer files between the phone and computer
- Users should ensure they are using the correct root package for their device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: International Business Times cannot be held responsible for anything that goes wrong. Users should proceed at their own risk.
Tutorial
Step 1: Download CF-Auto-Root package and Odin v3.09. Then, extract the files to the computer.
Step 2: Boot the Galaxy S5 in Download mode by pressing and holding down the Volume Down, Home and Power buttons together. When a warning screen is displayed, press the Volume Up button to enter Download mode.
Step 3: Now, run Odin3 v3.09.exe as an Administrator and then connect the Galaxy S5 to the PC via USB cable. If connected successfully, a message showing “Added!!” will appear in Odin’s message box, if not, try another USB port. If the issue persists, try reinstalling the USB driver.
Step 4: Click on the AP button, and select the CF-Auto-Root file (a .tar.md5 file), which was extracted in Step 1.
Step 5: In Odin, make sure that the “Auto Reboot” and “F. Reset Time” options are checked while “repartition” is unchecked.
Step 6: Click on the Start button in Odin to begin the flashing process.
Step 7: After the process is complete, the Galaxy S5 will restart and a PASS message with green background will appear in the left-most box at the top of Odin.
Voila! you have successfully rooted your S5!

And this will also trip KNOX I supose?

Hasn't this been covered elsewhere?
Sent from my SM-G900F using Tapatalk

This method seems sooooo much more complex than towelroot and potentially more risky?

AMoosa said:
Hasn't this been covered elsewhere?
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Yes, in the developer's original thread, and he should be getting the thanks for it.
[SM-G900*] CF-Auto-Root

Thread closed as Chainfire already has a thread here so there is no need for one that essentially copy/pastes the information in his thread.

[guide][images][root] how to root samsung galaxy pocket plus s5301 and cwm

Hello,
This is step by step guide with images to root and flash cwm recovery on SGP+
the original method is by @blearreaz0n thanks to him
his topic :- http://forum.xda-developers.com/showthread.php?t=2291865
Instructions
This guide has two parts, the first is flashing CWM , the second is rooting​
First : Flashing CWM​
Needed files :-
1-USB Drivers >>>> http://www14.zippyshare.com/v/78199247/file.html
2-Odin 3.07 >>>> http://www57.zippyshare.com/v/89558735/file.html
3-CWM Recovery >>>> http://www39.zippyshare.com/v/50102340/file.html
Instructions
1-Install "USB Drivers"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2-Enable USB debugging...open setting >> developer options >> USB Debugging
3-Extract and open Odine
4-Connect the device to your pc with usb cable
5-Turn off the device then get into Odin mode by holding (power + volume down + home ) a screen should appear
this screen should appear
press volume up
6-In odin at ID:COM section a blue icon like that should appear "0:[COM5]" and "added" in the white box
7-In pda section select CWMRecovery-S5301-20130531.tar.md5 file
8-press start...wait until it say reset
Disconnect the device from the PC, Now you have CWM recovery
Second :- Rooting​
Needed files :-
1-SuperSu V1.94 >>>> http://www39.zippyshare.com/v/65031874/file.html
Instructions
1-Copy SuperSu 1.94 to your memory card and insert it in the phone
2-Turn off the device then go to recovery by holding ( power + home + volume up )
In the recovery use volume up and down to move up and down.. use power to select
3- Select "install zip from sdcard"
4-Select "choose zip from sdcard"
5-Now select the file "SuperSu V1.94" and chose "Yes - install"
6-This should be the result
Now your phone is rooted

CWM Recovery ist not available. Could You reupload it plz? Thanks.

Never mind. I found it myself.

works fine for me