Database Develop

[ROOT] Any stock rom step by step with Mobile Odin Pro (Noob Proof)

I think most people want their android phone get rooted. And should do flash step carefully.
I'm noob too. So, I'm make some step by step to get you to your goal without any worry. (If you have mobile odin pro of cause)
1. Download this 4 package
- ODIN 1.85 for Windows
- Sheep Rom v2.2 (You can flash this rom with odin with out any flash counter and it's build-in root)
- Mobile Odin FlashKernel for Note (will need this for your Mobile Odin Pro)
- Kies (You need this package from Sammy to install Mobile driver for you)
- Stock Rom by your choice
2. Make your phone into download mode by press and hold "Volume Down + Home + Power" until you see screen with yellow sign (Don't panic this is not legendary flash counter sign )
3. Press "Vol Up" to continue You'll see green android mascot.
4. Unzip "ODIN" package and "Sheep Rom" then Install "Kies"
5. Run ODIN with Odin3 v1.85.exe
6. You will see something like this. Connect your phone to PC with USB cable (program status become yellow when you connected to PC) (If Kies try to start just cancle and close it)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Click on PDA PHONE and CSC button and choose file like in picture.
8. Click Start (This process take some time becareful to not shutdown your PC while flashing)
9. Status will show "PASS" in green This means you're good to go. You can unplug your USB cable now. (You mobo will automtically reboot)
10. Wait your mobo to reboot. (this'll take for awhile than normal boot don't panic) (You can close ODIN program now.)
11. If you can boot normally then you're good to go. Just Install Mobile Odin and FlashKernel package.
12. Move new stock rom you want to flash to Build-in SDCARD by connect your mobo phone with USB cable. (New portable device name GT-N7000 will show. If it's not just try reconnect again)
13. Double click on it. You'll see Build-in SDCARD drive name "Phone" just double click again. (Your current path shoud be look like this "Computer\GT-N7000\Phone")
14. Unzip stock_rom.zip. Then copy file .tar.mp5 to that drive "ETC. N7000DXLA1_N7000OLBKL2_N7000DXKL2_HOME.tar.md5" Wait to complete then close explorer.
15. back to your phone open mobile odin you'll see some thing like this.
16. choose Open file .... then choose you file .tar.mp5 (if you put it like I'm told. it should be on lowest screen.)
17. Ever Root will automatically checked (Ever Root is needed to automatically root your stock rom)
18. Press Flash Firmware... then wait and enjoy our new rooted stock rom.

ROOT and CWM recovery on galaxy 2 7 3113 easily

hey guys i was looking for rooting my galaxy tab 3113 and found simple and easy way in other forum ....I dont know if its allowed But m posting it out here...it work as charm for me ..hope u like it
notice :i just copy paste link no responsible for any damage or loss!!!
Download imnuts' espresso_recovery.tar.md5
(Use if your GT2 came with UEALCB firmware and it has been updated OTA to UEALD3 firmware, or you're running UEALD3 and not sure if it was updated OTA.)
Download xoomdev's espressowifi-recovery-5-18.tar.md5
(Use if your GT2 is currently running UEALCB firmware or came with UEALD3 firmware out of the box.)
Download nycbjr's cwm-root-gtab2.zip
Download Odin3-v1.85_3.zip
Download Samsung Drivers (Not required if you have already installed Samsung Kies)
Copy cwm-root-gtab2.zip to the ROOT of your sdcard ( /mnt/extSdCard ). This is the sdcard in the slot. The /mnt/sdcard folder is in the internal memory and won't be recognized in recovery.
Turn off your tablet and restart it in download mode by pushing and holding down the Power and Volume DOWN buttons at the same time. Push the Volume UP to get into download mode. Don't plug the tablet into the computer yet.
If you installed Samsung's Kies software, make sure it is closed and not running.
Extract Odin3 v1.85.exe and run it.
Connect the tablet to the computer.
The first box under ID:COM will be yellow and shows the current com port you are connected to. If you can't connect, try another USB port.
In Odin, click the PDA button. Select the espresso_recovery.tar.md5 or espressowifi-recovery-5-18.tar.md5 file you downloaded and click the START button. Let Odin do it's thing. When it's done, the tablet will reboot.
Disconnect the tablet from the computer. Turn the tablet off and restart it in recovery mode by pushing and holding the Power and Volume UP buttons at the same time.
Once you are in recovery, use the volume button to move around and the power button to select an option. Select install zip from sdcard. Choose the cwm-root-gtab2.zip file you already copied to the root of the sdcard.
When the rooting is finished, choose reboot system now in the recovery menu.
That's it. If everything went well, you should now be rooted.
original link : rootzwiki
All credit goes to:
xoomdev for the CWM Recovery
nycbjr for the CWM Root
jcase for the Unsecured Boot Images
imnuts for packaging jcase's UEALD3 unsecured boot image with xoomdev's (5/19) CWM recovery for use in Odin. (See this thread)

Does this work on this firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
swaggedout GT-P3113

dswaggz said:
Does this work on this firmware
swaggedout GT-P3113
Click to expand...
Click to collapse
No, it doesent.
You can try it, but you get stock recovery ,
If you succeed,, please post.

Tried a thousand times can I hard reset to before update?
Sent from my GT-P3113 using xda app-developers app

Problem solved :thumbup: http://rootzwiki.com/index.php?/topic/25228-[How-To]-Rooting-GT-P3113-Step-by-Step-(Updated-05/24/12)
swaggedout GT-P3113

This?
Sent from my GT-P3113 using Tapatalk 2

Root LeEco Cool 1 and Install TWRP custom recovery

Root LeEco Cool 1 Root Cool 1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This tutorial guides to successfully install Custom recovery on Root LeEco Cool 1. It is suggested to take a backup of your ROM before following this guide. This guide will help to instal Clock Work Mode or CWM recovery on Root LeEco Cool 1 only. Please use the provided files and ZIP only. Read all screen before clicking on action keys.
After LeEco acquired Coolpad LeEco launched another Coolpad smartphone with its EUI in Cool 1. The Coolpad Cool 1 is now officially launched in India after a major hype of dual camera at much lesser price. The smartphone is launched at 13,999 INR while in China its prices a bit lesser than that.
Note:
Rooting will void the warranty of your smartphone.
Please follow each and every step carefully to safely root your smartphone without bricking.
We will not be responsible if you brick your smartphone.
Take a backup of your stored files and possible full ROM before rooting.
Make sure you read all steps carefully before doing anything to your smartphone.
Rooting is not illegal but some illegal activities could be engaged after rooting your device.
If you brick your device please mention the issue in comment box we will help you as soon as possible.
Make sure your device is same as mentioned in the article’s title.
Requirements:
Charge your device at least more that 30%.
A USB cable.
Windows Computer.
Patience.
Process 1:
Downloads:
TWRP
Fastboot ZIP
Steps to follow:
Download all files from above links.
Install and configure ADB and Fastboot.
Connect the device to PC via USB cable.
Open the TWRP folder in PC and right click holding the shift key and select “Open command window here.
in Command prompt window type ” adb reboot bootloader”. The device will boot into bootloader mode.
After the device boots up complete type “fastboot flash recovery twrp-2.8….” or after pressing twrp- press the tab key. The process will flash TWRP in your Lenovo K6 Note.
After successful process type “fastboot reboot”. The smartphone will reboot.
Again type “adb reboot recovery” to boot the smartphone in recovery mode.
Process 2:
Download iRoot application from here
Open and Install iRoot from Windows Computer.
Connect your Device via PC
Allow USB debugging in your Mobile (Go to About devcie>tab multiple times in Built Number until you unlock Developer Mode>Turn ON USB debugging.
After turning on USB debugging your device will flash a message allow to use USB debugging.
After iRoot detects your device click on Root.
Wait until the Process is done.( phone will reboot multiple times during the process.)
source: https://gadgetcreed.com

Is this for LeEco Cool1 or Lenovo K6 Note?

Can it be used to root Cool Changer 1c?

Brick...

Hello! I followed the instructions below but the process got stuck at "<ID:0/006> boot.bin". After it was stuck like that for about 30 minutes I pulled the plug.
Now I have a completely black screen and can't boot into dl or rec mode..
Please help?
xsenman said:
Use Odin3 Version 1.7 to 1.83 ( meant for Galaxy S1 series (attached below)
Attached below 3 i9000 PIT files ( use 512 only for re-partition ) or 512 PIT
i9000 JVU ROM with i9000 JVU CF ROOT Kernel download and unzip
FIRST ensure your phone (i9000) has more than 80% battery charge before attempting to Flash.
Procedure:
1. Fire up Odin3 on your PC and ensure KIES is not running on your PC by killing (Kies.exe , KiesTrayAgent.exe, and KiesPDLR.exe) using Task Manager
2. Put the phone to the Download Mode by pressing (VolumeDown+Home+Power) buttons and connect the phone to your PC (your phone should be recognized)
3. Select PDA > CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5
4. Select PHONE > MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
5. Select CSC > GT-I9000-CSC-MULTI-OXAJVU.tar.md5
6. Select PIT > 512 PIT (If 'Re-Partition' is not checked under 'Option', check it)
7. Press the Start button Do not press anything else or interrupt it, wait for flashing process to complete and phone will reboot
After which you repeat steps one and two (to flash the kernel for root and CWM recovery)
3. now select PDA > CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS
4. press Start Button. Do not press anything else or interrupt it, wait for flashing process to complete and phone will reboot
That's it, now you have a perfect Phone, rooted and having CWM recovery, ideal starting point for upgrading to ICS and after that to Jelly Bean custom ROM's
Any problems you may have after doing this, just look here for the solution to that particular problem.
As explained earlier (about clean flashing) if your phone reboots into recovery with some errors appearing in red after flashing the JVU ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it may be resolved by flashing dbdata.rfs (attached below) as PDA in Odin3 to remove the junk data files.Using Heimdall to flash
You can do the same process using heimdall instead of Odin3 too, to use heimdall one click you can download i9000 Rescue kit and flash. or use [GUIDE] Flashing with Heimdall​
Click to expand...
Click to collapse
​

[Help] Upgrade SM-G920A from Marshmallow 6.0.1 to Nougat 7

Hello all,
Trying to upgrade my AT&T S6 SM-G920A from Marshmallow 6.0.1 to Nougat 7. It's an AT&T phone but I am using Cricket Service. I can't get the update through the device. I want to use ODIN to flash it but there's so many guides out there that I don't know which to follow and which files to flash? Any help?
My baseband version on the phone is G920AUCS5DPJ1
Thank you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I'm thinking this is how to do it?
Download this... https://forum.xda-developers.com/att-galaxy-s6/general/sm-g920a-nougat-7-0-1-stock-att-odin-t3811566
And follow this guide to flash it using ODIN? https://androidxda.net/install-ucu5eqa8-android-7-0-nougat-official-on-att-s6-and-s6-edge/
Step No 1: – First, download Android 7.0 Nougat and Odin v3.10.7 for AT&T Galaxy S6 and S6 Edge SM-G925A/ G920A on the desktop of your PC.
Step No 2: – Now, extract the archived contents to get the tar.md5 update file. Don’t extract the tar.md5 firmware update file.
Step No 3: – Turn OFF your AT&T Galaxy S6 and S6 Edge SM-G925A/G920A to boot into Download Mode.
Step No 4: – Turn the device ON by pressing and holding the Volume Down + Home+ Power keys at the same time for a while till the construction Android robot and a triangle appear. Now press the Power button once again to confirm to enter into Download Mode.
Step No 5: – Launch Odin tool on your PC as an Administrator and plug your phone to your PC while your phone is in the Download Mode.
Step No 6: – One of the ID: COM boxes will turn yellow with the COM port number once the phone is connected successfully.
Step No 7: – Select the firmware files tar.md5 that you want to flash on your AT&T Galaxy S6 and S6 Edge SM – G925A/ G920A. (Already extracted in Step No 1)
Click on ‘AP’ and select file with ‘AP’ in its name.
Click on ‘CP’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
Click on ‘CSC’ and select file with ‘CSC’ in its name. Ignore this step if there is no such file.
Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
Click on ‘BL’ and select file with ‘BL’ in it’s name. Ignore if there is no such file.
Step No 8: – In Odin, make sure that the Auto Reboot and F. Reset Time options are ticked, but the Re-Partition option should be unchecked.
Step No 9: – Click on the Start button in Odin to initiate the installation process. It will take a few minutes.
Step No 10: – Once the installation process is successfully finished, the AT&T Galaxy S6 and S6 Edge SM-G925A/ G920A will restart. Unplug the phone after you see the home screen.
Done! You have successfully updated AT&T Samsung Galaxy S6 and S6 Edge SM-G925A/G920A to Android 7.0 Nougat official firmware update.
Click to expand...
Click to collapse

I bit the bullet and said EFFFFF it and did what I just posted and it worked!