Hi so i updated my G920A to to EQCF (Nougat) baseband recently via Odin. Most of the times when i receive a call and i try to swipe to receive it, i cannot pick up the call, it just goes to the ringing state after a little bit of time. I cannot reject the call neither can i pick up the call. I have to restart my phone every time this happens. And it happens after every 10 hours or so. Secondly, e.g. in my room a previous HTC M8 worked perfectly (using the same network ofc), but most of the time the other person cannot hear me from my S6. Sometimes there is a loud static noise in my earpiece.
Do you guys think this is a problem with the phone or a bug in the software?
Related
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
What headset are you using?
Does it have a delay without a headset?
On mine I get a delay with a headset that supports the handsfree profile (Jabra BT800) but not on a normal one, or without a headset.
My XDA2 did this also, but the XDA2 with WM2005 worked perfectly.
could be the time needed to find/load the ringtone ?
do you have caller id or ringtonex with different ringtones and/or pictures?
maybe loaded from memory card ?
audiblefrequency said:
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
Click to expand...
Click to collapse
I have the same problem with mine... I only get three rings to answer the phone - which can be pretty annoying!
I've not noticed whether having any form of headset makes a difference, though.
Ringing Delay
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Re: Ringing Delay
LYNDONSLANN said:
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Click to expand...
Click to collapse
I have the same problems and the bluetooth flattens the battery in 4 hours. I used to have the XDA II with Sins cooked 2K3se and it was perfect, unfortunately I gave it to my son who won't give it back.
Hey, I have same problem, I got the latest ROM, and since then it got even worse. Does anybody knows how to fix the problem, modify ROM, or something, PLEase help.
Thank you.
the only solution i have to date is to change the answerphone delay, you can find your networks status codes here:
http://www.expansys.it/forumthread.asp?code=K700&thread=72
i changed mine to 30 secs to give me a better chance!
cheers
Hi there,
i own a diamond for a week now and i have two strange problems.
one is, when i receive incoming calls sometimes i cannot hear my dialogue partner but he understands me. until i press one of the volume buttons at the side. i think this does not always happen, but in about one of three calls. i also think this only happens on incoming calls, not when i call.
second is, when i dial a number sometimes i don't hear it ringing. theres absolutely no sound until the called person receives my call. this is not reproducable and happens in about one of four cases. i can call someone and hear it ringing and immediately call again and it doesnt make a sound.
this does not sound like a hardware problem. i have rom 1.37.407.2 installed and i am from germany.
i hope someone can help me, this kinda pisses me off. thanks.
alright then, seems solved. I updated to the latest official Rom.
Just curious...
I've had the phone for just over a week, and have the Kang-O-Rama bundle installed. Overall, it's awesome...
What I have noticed though is that there doesn't appear to be a tone for incoming call waiting. A couple of days ago I noticed I had a missed call/VM after I hung up on my current call. I tested it out by calling a friend and having another friend (who was with me) call me while I was in the call. There was no audible notification while in call.
I then activated the "vibrate incoming call waiting" or whatever option and that appeared to work, but still no tone. And even the vibrate may be hit and miss, as I missed another call today while on a call.
Does the Nexus One not have a call waiting tone? Is it buggy? Is it the CM ROM?
yes I am having same problem but I am using home rom.
I think I have seen this, but not quite what you describe. my phone beeps only the first time for call waiting, then it stops. maybe this is the way its supposed to be cause I like it like that.
Is your in call volume on low and is it enable in the settings? Setting-call settings-additional settings-call waiting checked.
I'll be darn if I can figure out what is going on here.
4.1.2, stock except for custom kernel brick bug prevention.
I've had this rom running since it was released (this is a note international, GBT via amazon, used in the states)
Never had an issue, but I've started to notice a couple missed calls. Today, I saw what was happening.
Incoming calls, the ringer only rings for maybe 1/2 second, phone continues to "ring" but you never hear
anything! It's like it has been silenced as if you quickly pressed a button. That's how it acts without bluetooth.
If I have my bluetooth (jawbone ERA) turned on, SOMETIMES, if the screen is off, it NEVER rings, on the speakerphone
I'm using to dial my Note, I hear it ring 2 times, then go directly to voicemail. Sometimes it does that, sometimes it does
not, otherwise, the phone ringtone plays for a split second, headset continues to ring normally. Screen shows the incoming
call, but no ringtone. I haven't tweaked, installed, updated anything to cause this. Just one day it started doing it.
I'm about to do a clear reset, but it's just a PITA to set it up. Device is going on 18 months old, first issue I've really had
with it other than a bad USB port or a worn battery.
Any clues?
edit: Found the issue...I use call control as a phone number blocker. In settings, I had on for blocked calls, "remove partial ring" turned on. Once that was turned off, everything started working.
I suffered from the silent phone calls in the past, but it was fixed with a HTC patch and everything was good... for a while.
I flashed ARHD90.1 on the day of release and it has been good.
However, just today when I go to make phone calls, I only get silence. No ring tone, no voice when the call is answered.
Is anyone else suffering from this issue recently?
Are there any solutions to this now?