Some days ago I have downloaded an update for my gionee m2 8gb from system update app of gionee and after downloading it fully, tapped the update icon. The phone switches off then it on's and after a lap it shows that update failed. now when i tried to go back to the system it just flashes Gionee symbol and comes to recovery mode and the same is going back again and again.
now as I have flashed the stock rom and run my phone but trying this same today the same thing happened again.
Is there any problem with update or what. and how can i update the same correctly
deepeshm41 said:
Some days ago I have downloaded an update for my gionee m2 8gb from system update app of gionee and after downloading it fully, tapped the update icon. The phone switches off then it on's and after a lap it shows that update failed. now when i tried to go back to the system it just flashes Gionee symbol and comes to recovery mode and the same is going back again and again.
now as I have flashed the stock rom and run my phone but trying this same today the same thing happened again.
Is there any problem with update or what. and how can i update the same correctly
Click to expand...
Click to collapse
Hi!
I am also facing the same issue with my phone. Please let me know if you find a solution.
You can try and check if the update zip is downloaded correctly. Try using a more stable network like Wifi or ensure there is no connectivity issue while downloading the update.
If you search around, you might be able to find the update file here on XDA Forums. You can just download it on your phone, name it update.zip(or something so that the system update recognizes it as the update file) and update your phone using the built in System Update app.
Or just flash a custom ROM (seriously why are you using that sloppy, bloated rom?)
Hit thanks if this helped you!
Related
background info: I installed the froyo that was leaked a few months ago. it wasnt stable so I went back to JH6. The problems started when i tried to update OTA to JH7.
Issue: so i've tried this many times. first, i go to settings, software update, then i select "check for update". it goes through the communication process then i downloaded some file. then the phone tells me it needs to be rebooted, so i let it reboot. as it reboots a white screen pops out and a status bar that reads "installing" reaches 50% then it says that the installation failed. the phone reboots and when the phone gets to the home screen a message comes on that says the "update was not applied".
could anyone help me with this? it happens everytime. ive master cleared, flashed over and over with odin. it doesnt work. plus my gps and google nav doesnt work. it continuously reads "searching gps". please help. thanks.
Use search, look for Kies Mini.
Sent from my Craptivate with the leaky rom
ive tried that too. when i plug in my phone Kies force closes on my computer...i followed every step on the website suggested by the att folks and still didnt work.
There is a stock jh7 zip you can apply in recovery in development forum.
newter55 said:
There is a stock jh7 zip you can apply in recovery in development forum.
Click to expand...
Click to collapse
+1. Flash the stock JH7 Design Gears posted and flash it with clockwork mod.
Hi Guys
I have the XT1092 with the GB ROM installed and I am having some serious trouble getting it to update to android 5.0 I have unlocked the bootloader.
I must have downloaded and tried to install the update for 5.0 about 6-7 times now. I have tried clearing the cache and installing afterwards, this did nothing and also doing a factory reset and installing it after and I get the same problem.
The phone reboots, thers a screen with the android on his back with 'system update installing' and then it gets about 25% through, briefly an exclamation mark appears and the phone reboots.
It goes back into the 4.4.4 and then a screen appears saying 'Software update unsuccessful sorry there was a problem updating your Motox, No changes were made'.
Is there anything else I can try?
I did try to flash the EU ROM on not long ago and I gave up, is there anyway I can put a fresh GB Rom and flash everything back on again from scratch?
Any help is appreciated
Cheers
Alex
Ok I have flashed the EU 4.4.4 rom found on another thread, Now I am struggling with ADB.
When I run System update it shows that the EU 4.4.4 rom is now installed all good and proper but it
says I am all up to date, The liar!
So I am trying to sideload the 5.0 update to my device using adb. The strange thing is, that when the phone is powered on in the 4.4.4 and I run a 'adb devices' command I can see the phone there in the list of devices.
But when I put it into recovery and select the adb sideload option it is not coming up on the 'adb devices' command
Anyone know why?
Hi everyone,
I seem to have nothing but trouble when it comes to installing OTA updates for my Gear Live, and am wondering if anyone can help me.
It all started when the Android 5.1.1 update notification arrived on my Gear Live some time ago. I eagerly installed it, and expected it to install without any problems. Unfortunately, the update reached around 30%, before displaying the Android mascot with a red exclamation mark. I managed to restart the watch, and re-downloaded and installed the update. The same thing happened, except, it was stuck in a boot loop :crying:
I contacted Samsung Australia who took the watch in for repairs (it took them 4 weeks). I was pretty happy to see the watch working again, and running the 5.1.1 update.
Just yesterday, I received a notification that an update is ready to be installed. I swiped and hit install. The watch rebooted, and began the installation. Again, reaching 30% before failing and displaying the Android mascot with the red exclamation mark. I am yet again stuck in a boot loop. I managed to tap the Android mascot, which brought up the Android System Recovery. It said
"Installation aborted.
OTA failed! Please power off the device to keep it in this state and file a bug report!"
I have cleared the cache, and have wiped the data through recovery. This seems to allow the watch to boot up, however, the process repeats itself when I try to update it again.
Does anyone know why the update would be failing, especially after it has already been repaired by Samsung, and how I can fix it myself (I don't really want to be without a watch again for 4 weeks)?
Thanks,
Tim
Did you try the live restore tool? (read the whole thread)
Brendo said:
Did you try the live restore tool? (read the whole thread)
Click to expand...
Click to collapse
I attempted to use it, however, it was unable to detect my device.
Update: I attempted the update again, which failed. However, instead of wiping the data, I navigated to 'Install via ADP' (or the likes), which brought up an error message:
Verifying current system...
"/system/priv-app/ClockworkHomeGoogle/ClockworkHomeGoogle.apk" has unexpected contents.
E:Error in @/cache/recovery/block.map
(Status 7)
Installation aborted.
OTA failed! Please power off the device to keep it in this state and file a bug report!
Click to expand...
Click to collapse
tims1710 said:
I attempted to use it, however, it was unable to detect my device.
Update: I attempted the update again, which failed. However, instead of wiping the data, I navigated to 'Install via ADP' (or the likes), which brought up an error message:
Click to expand...
Click to collapse
Try a different usb cable? (ie official, not a cheap one)
My watch always took a few goes to get detected by adb
tims1710 said:
I attempted to use it, however, it was unable to detect my device.
Update: I attempted the update again, which failed. However, instead of wiping the data, I navigated to 'Install via ADP' (or the likes), which brought up an error message:
Click to expand...
Click to collapse
I had that exact error yesterday when I was trying to install new OTA update. I flashed back to KMV78Y(from live restore tool v2) Don't use v3 it has corrupted file and breaks bluetooth.
Try to manually flash using fastboot. I wouldn't recommend trying to flash recovery partition from live restore tool since you can end up with a broken OTA and broken adb sideload. Also, don't try to flash TWRP into recovery partition. Loading it into ram memory is fine though.
Anyways, to manually flash using fastboot, you need to open console and go to directory of Gear live restore tool. Make sure your watch is in bootloader mode, not recovery. Type fastboot flash boot 78Yboot.img and then fastboot flash system 78Ysystem.img Do factory reset just in-case and upgrade your way up to latest firmware.
Hello,so I installed the Google Play Edition+ ROM, didn't get any problems at the installation and everything went smooth.After using the phone for a while (1 hour) I am getting prompted with a message for an update(Android L upgrade for user/release-keys). So I accept the update to be installed and after 10 seconds the phone restarts and boots into recovery running OpenRecoveryScript that stopped after
HTML:
MD5 check file : no file found L50QCT.00.001.002
.After waiting 10-15 minutest I get Error which says that Installation failed , after rebooting the phone it freezes at Google logo loading. Any advice,help will be appreciated.
Cyberpwn said:
Hello,so I installed the Google Play Edition+ ROM, didn't get any problems at the installation and everything went smooth.After using the phone for a while (1 hour) I am getting prompted with a message for an update(Android L upgrade for user/release-keys). So I accept the update to be installed and after 10 seconds the phone restarts and boots into recovery running OpenRecoveryScript that stopped after
HTML:
MD5 check file : no file found L50QCT.00.001.002
.After waiting 10-15 minutest I get Error which says that Installation failed , after rebooting the phone it freezes at Google logo loading. Any advice,help will be appreciated.
Click to expand...
Click to collapse
Did you read Gpe+ thread?Advice?wipe all and clean flash rom again,and don't update next time..Official htc updates don't work on custom rom's,with root,with custom recovery.Updates work on everything stock.
Sent from my Htc One
Yeah I've read the GPE+ thread and did everything there. So is there a way that I can remove the notification from the top menu, I have tried everything and its still on the drop down menu.
Cyberpwn said:
Yeah I've read the GPE+ thread and did everything there. So is there a way that I can remove the notification from the top menu, I have tried everything and its still on the drop down menu.
Click to expand...
Click to collapse
Sorry,I don't know how,I'm on latest "stock" 5.1 rom from that same thread,I don't have problem with that.But I remember that there were few posts and discussion in the thread about gpe+ update and notification,at the time when official update came out,search there or question there how to move notification.
Sent from my Htc One
Cyberpwn said:
Yeah I've read the GPE+ thread and did everything there. So is there a way that I can remove the notification from the top menu, I have tried everything and its still on the drop down menu.
Click to expand...
Click to collapse
long press notification in pull down bar.Press on i and disable updates.
Sent from my HTC One
Hello all before I describe my issue lemme tell you how I got there.
First of all, new phone, couldn't install pixelexperience and flashing stock android was being a pain with all methods (read not working), only managed to install stock android with pitch black recovery.
After a while it auto updated to android 9 and I started having wifi issues that people told me were android's fault so I waited for an update. Update came but android was unable to install it, giving errors after errors every time it downloaded the update.
My solution to all of this was to flash another rom, either stock or custom, and pray it works. It was scheduled to happen in 2 days, when I had free time.
Today, when trying to change the permission for a text file for an app from read only to write, some random process crashed, and it triggered a crashing cascade, including the settings app, homescreen launcher, etc until the phone restarted and got stuck in TWRP logo screen.
No key press, combination, resets, etc would fix it. So I got into fastboot and tried a few things with no luck. Flash stock rom again and phone seemed to be working.
Magisk manager couldn't install magisk and root the phone so I went into stock recovery/twrp and every time I did it I got a black screen message saying something like this:
"Your phone/system is corrupt and won't boot ever again *evil laugh*. Oh btw, go to this link in another device to cry more"
and the link redirects to a google page with some non-useful info.
So here I am, unable to root, unable to go into recovery, phone boots though. I force-stoped updates for a while, as android 9 wifi issues were terrible, and I don't know how to proceed.
Do I flash a stock image again, a custom one, try another rooting method?
I don't want to brick a 6month old phone, really sucks.
Btw, is there a reliable way to back up everything in the phone ?(not only google stuff, but app configs and files/folders) Long time ago I read something about Titanium backup but never looked into it further and now with this crash that lost me everything I wanna prepare for the future.
Thanks for all the help and for reading my boring story.
Even I am facing same problem.. In my case my phone is rooted and I cnt flash TWRP and I cnt get into fastboot mode.. I alwys endup with black screen..