Database Develop

FireKernel for LP (5.1.x) ROMs (3g/4g)

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Support for Governors---
Interactive
Performance
PowerSave
Userspace
Optimizations and Tweaks---
Disabled CRC-Check for upto 30% faster I/O.
Support for Dynamic-FSync (adjusts FSync according to usage resulting in a significant boost in the I/O performance).
Reduced RQ Lock-Contention for upto 0.7% increase in Performance.
Install
Copy the zip to your external or internal memory
Boot to twrp
Select the zip.
Reboot to system
Download-- Note 3 Neo (3g/4g)
XDA:DevDB Information
FireKernel for LP (5.1.x) ROMs (3g/4g), Kernel for the Samsung Galaxy Note 3 Neo
Contributors
FireLord, franciscofranco,Shoaib05
Source Code: https://github.com/FireLord1/android_kernel_samsung_smdk5260/commits/FireKernel-lp
Kernel Special Features: battery life
Version Information
Status: Beta
Created 2016-10-08
Last Updated 2016-10-08

ChangeLog
v1
Code:
FireLord1 - script: use google gcc 4.8
franciscofranco - Reduced RQ Lock-Contention for upto 0.7% increase in Performance
Shoaib0597 - Optimized task_sched_runtime for upto 20% increase in Performance
Shoaib0597 - Added support for CRC Toggle
Shoaib0597 - Reduced OverHead
Shoaib0597 - Enabled ARCH-Power feature
Joonsoo Kim - slub: fix a possible memory leak
franciscofranco - Remove '+' symbol from kernel version string
franciscofranco - drivers: mmc: according to the comment left by the original author disabling a cyclic redundancy check on data blocks by yield a a performance improvement hovering ~30%
Francisco Franco - backport https://lists.linuxfoundation.org/pipermail/ltsi-dev/2013-December/002683.html from Kernel 3.10 workqueue: use a higher bit to give more space to actual non-internal flags
franciscofranco - ksm: check and skip page, if it is already scanned
franciscofranco - sched: LOAD_FREQ (4*HZ+61) avoids loadavg Moire. From http://ripke.com/loadavg/moire
franciscofranco - Added fsync on/off support.
Greg Kroah-Hartman - Linux 3.4.40
FireLord1 - Linux: FK: r1
FireLord1 - script: zip: add building script and all
FireLord1 - defconfig: renamed to match script

Reserved
* This is my Kernel from osprey (moto g3). this may not have much features as compared to my first kernel release bcz that is for qcom and in exynos i cant do much BUT ill try to maintain main thing which is common. i.e battery life
* osprey: http://forum.xda-developers.com/2015-moto-g/orig-development/firekernel-v1-0-mm-6-0-x-roms-t3401538
* This is for single sim exynos galaxy note 3 neo.
* Compatible with all the custom roms.
* Can work for stock rom too but one thing will not work that is USB PC connection bcz i have edited the files for cm so..
* Its still using google GCC, will test uber GCC if that seems stable ill cook and give here.
* Well not much features but but.. ill upstream till 3.4.112 one Day!
* As always i dont own note 3 neo but i like to make stuff for it. Thanks to my testers 3g and 4g both.

It's very nice to see this Kernel coming from our osprey. It's the nice kernel for Osprey. Hope it's smooth & stable like osprey for exynos too
Huge kudos for you to work on 'Exynos' like SoC. Best of luck.

Thank you for your dedicated work brother. Appreciate it, and keep it up ?✌?

Thanks, waiting for N7502 custom ROM

Good job @FireLord

It doesn't save wifi when I reboot...I am on stock Why? :/ please help me cause I really need a costume kernel and I really appreciate your work! @FireLord

JimmygreecePanathinaikos said:
It doesn't save wifi when I reboot...I am on stock Why? :/ please help me cause I really need a costume kernel and I really appreciate your work! @FireLord
Click to expand...
Click to collapse
Wooah. Sorry to hear that.. Can you tell your device? I'm not sure if I can fix..
Sent from my MotoG3 using Tapatalk

FireLord said:
Wooah. Sorry to hear that.. Can you tell your device? I'm not sure if I can fix..
Click to expand...
Click to collapse
Samsung galaxy note 3 neo 4g version stock Android 5.1.1 Thanks for the fast reply I hope you will find something to fix this.. You always do!!

JimmygreecePanathinaikos said:
Samsung galaxy note 3 neo 4g version stock Android 5.1.1 Thanks for the fast reply I hope you will find something to fix this.. You always do!!
Click to expand...
Click to collapse
umm dunno how stock works.. try deleting /system/lib/module (whole module folder) it is not required cuz kernel has it inbuilt now.. please make backup before doing anything

FireKernel for SM-N7507 (hlltezt)
This is FireKernel with fixed Deadlock bug
Download: AFH

FireLord said:
umm dunno how stock works.. try deleting /system/lib/module (whole module folder) it is not required cuz kernel has it inbuilt now.. please make backup before doing anything
Click to expand...
Click to collapse
I always have backups... You don't say on the steps if we have to do a simple wipe/cache after installing the rom.. Could this be my problem for no savings wifi passwords after reboot??

JimmygreecePanathinaikos said:
I always have backups... You don't say on the steps if we have to do a simple wipe/cache after installing the rom.. Could this be my problem for no savings wifi passwords after reboot??
Click to expand...
Click to collapse
Yea try wiping after flashing kernel.. But hey? Why you keep on rebooting ?
Sent from my MotoG3 using Tapatalk

FireLord said:
Yea try wiping after flashing kernel.. But hey? Why you keep on rebooting ?
Click to expand...
Click to collapse
I installed a xposed module after your kernel so I had to soft reboot

JimmygreecePanathinaikos said:
I installed a xposed module after your kernel so I had to soft reboot
Click to expand...
Click to collapse
Oh.. Then try wiping cache
Sent from my MotoG3 using Tapatalk

Thx for your work. Will try the new kernel with stock rom in a few days.
Sent from my SM-N7505 using XDA-Developers mobile app

does this kernel fix camera issue or calling audio in cm-based roms ?
SAMSUNG Galaxy Note 3 neo

moss20 said:
does this kernel fix camera issue or calling audio in cm-based roms ?
SAMSUNG Galaxy Note 3 neo
Click to expand...
Click to collapse
Its just custom kernel.. Not bug fixing kernel please test it may fix
Sent from my MotoG3 using Tapatalk

biggoof75 said:
Thx for your work. Will try the new kernel with stock rom in a few days.
Click to expand...
Click to collapse
When you try please tell us if your wifi passwords are deleted after every reboot

[Kernel][M/N][AOSP/LineageOS/MIUI][Linaro 4.9] KaminariKernel R4 [04 March 2018]

KaminariKernel​
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now more void than it already was.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply grab my popcorn and laugh at you.
*
* Tl;dr: if your device crashes and burns, and if that gets you in trouble, it's entirely your fault. [STRIKE]Might be my fault as well, because I'm not a developer, but I don't care. lol[/STRIKE]
*/
Hey folks!
After being a Falcon exclusive for quite a long time, KaminariKernel's LineageOS edition is now available for Peregrine. Have fun.
Features:
Sources & Optimizations
- Based on Lineage's shared falcon/peregrine/titan/thea sources
- Compiled with Linaro 4.9
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- MSM Hotplug
Click to expand...
Click to collapse
Extra CPU Governors
- Impulse
- Smartmax
- Yankactive
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- Simple GPU Algorithm
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- CPU Overclock (up to 1.6 GHz) (Overclocked version only)
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Unified Marshmallow & Nougat (CM/LineageOS 13 & 14.x)
Click to expand...
Click to collapse
Looking for previous releases?
Go here.
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- Reboot again and have fun!
Coming from another kernel which isn't mine? Don't worry, no need to dirty flash the ROM/kernel anymore. The install script now does all the dirty work for you.
If you wanna tweak stuff, use Kernel Adiutor! (Synapse is NOT supported!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo
- Qualcomm/CodeAurora
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (AOSP/LineageOS, Peregrine), Kernel for the Moto G
Contributors
Kamin4ri
Source Code: https://github.com/Kamin4ri/KaminariKernel/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R4
Stable Release Date: 2018-03-04
Created 2016-11-21
Last Updated 2018-03-04

Reserved

Reserved

RESERVED!!!

Reserved too

The standard R1-M release is now available. The others shall be available soon.

Good job m8.
Does it feature the CPU overclock?

What is the difference between Standard and Alternative version? I know there says what is the difference but I want to know how will that affect phone. And which is better for battery life? And why no extra governors? Just curious. Anyways thanks for your hard work! Flashed the Alternative version and no problems so far
Edit: Tried installing Standard version, now the Hotplug menu in Kernel Adiutor is gone, that's intended right?
Edit2: I have a problem, sometimes my phone gets stuck and I have to reboot pressing power button for like 10 seconds. Also happenned that it was locked and led was blinking but I couldnt unlock the phone, black screen. Also happenned since I installed this kernel.

Fedray said:
What is the difference between Standard and Alternative version? I know there says what is the difference but I want to know how will that affect phone. And which is better for battery life? And why no extra governors? Just curious. Anyways thanks for your hard work! Flashed the Alternative version and no problems so far
Edit: Tried installing Standard version, now the Hotplug menu in Kernel Adiutor is gone, that's intended right?
Edit2: I have a problem, sometimes my phone gets stuck and I have to reboot pressing power button for like 10 seconds. Also happenned that it was locked and led was blinking but I couldnt unlock the phone, black screen. Also happenned since I installed this kernel.
Click to expand...
Click to collapse
I'm still thinking about putting extra governors. You went from Alternative to Standard, right? Then no, it shouldnt be gone. I must've done a typo in the updater-script (actually, i did just that, but fixed - hopefully - in R2). And about your phone locking up, could you send me a log or something? (Preferably dmesg)

Kernels updated to R2. Yeah, I skipped R1-N. It was built but i forgot to upload it. It had a messed-up installer script anyway.

Kamin4ri said:
Kernels updated to R2. Yeah, I skipped R1-N. It was built but i forgot to upload it. It had a messed-up installer script anyway.
Click to expand...
Click to collapse
Installed standard version r2, CPU hotplug menu still not available. Working with alternative version.
Enviado desde mi XT1040 mediante Tapatalk

Release 3 is now available! This one supports both Marshmallow and Nougat (single zip for both).
Changes:
- Synced with latest CM (Lineage) source code
- Build optimizations from kwoktopus
- Built with Linaro 6.2
You'll find the download links at the OP.

I'm in Resurrección Remix Marshmallow, this kernel should works? Sorry my bad english

[email protected] said:
I'm in Resurrección Remix Marshmallow, this kernel should works? Sorry my bad english
Click to expand...
Click to collapse
Of course!

Does this kernel support ExFat ?, thanks in advance.

J0hnick said:
Does this kernel support ExFat ?, thanks in advance.
Click to expand...
Click to collapse
It does support it via Filesystem in Userspace (FUSE). But the ROM must have an exFAT FUSE driver, and be able to actually recognise and mount USB sticks or memory cards formatted to the exFAT filesystem. CM and its derivatives/forks fulfill both requirements, whilst the stock firmware fulfills neither (even if you install fuse-exfat binaries, your USB stick or memory card won't automount because the version of vold which is shipped within the stock firmware doesn't support exFAT - you'll have to mount it manually via command line).
I've tried to implement exFAT support by using a kernel driver, but it didn't work well. That was a long time ago

Why did you remove the overclock? Which version has overclocked?
Sent from my XT1040 using XDA-Developers Legacy app

The cell phone gets very hot, the processor frequency drops to 1094mhz and 998mhz, and it gets very slow. Can you disable SoC's Temperature Control?

Joel Oliveira said:
The cell phone gets very hot, the processor frequency drops to 1094mhz and 998mhz, and it gets very slow. Can you disable SoC's Temperature Control?
Click to expand...
Click to collapse
Kernel Auditor is your friend

@Kamin4ri, I found on your AFH dev page the R4 version of this kernel, build date January 31, a bit old & not posted here, yet. Thinking of flashing it on my peregrine running RR N 5.8.2, is it safe enough ?
Since you haven't posted it here, I thought it maybe​ an experimental kernel & not stable enough.

[KERNEL][T813 ONLY]WhitePugKernel for the Galaxy Tab S2 WIFI 2016[AOSP BASED ONLY]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WhitePugKernel by joe2k01​
This kernel is only for AOSP base ROMs: AOSPExtended, LineageOS etc
How to install:
Download the flashable zip
Download (Oreo) the flashable zip
Boot in TWRP
Flash zip
Reboot and you're done
Feautures:
Added blu active governor
ZRAM support with LZ4 compression
XZ and LZO kernel compression support
XBOX joypad support(untested)
MSDOS fylesystem support
NTFS filesystem support
NTFS writing support
HFS filesystem support
HFS+ filesystem support
zen I/O scheduler
maple I/O scheduler
Option to disable fsync
Various optimizations
Donate to IARC or SaveTheChildren
https://www.iarc.fr/en/about/donations.php
http://www.savethechildren.org
Downloads:
V1: Download
V2: Download
V3: Download
V4: Download
V5: Download
XDA:DevDB Information
WhitePugKernel for the Galaxy Tab S2 WIFI 2016, Kernel for the Samsung Galaxy Tab S2
Contributors
joe2k01
Source Code: https://github.com/joe2k01/WhitePugKernel-samsung_msm8976
Kernel Special Features:
Version Information
Status: Stable
Created 2017-06-20
Last Updated 2017-11-13

thanks!! I´ll try it today

Is this for the 713 or 813?
Edit: I dug into the code... For the 813.

New build is up :fingers-crossed:
Changelog:
zen I/O scheduler
sio I/O scheduler
fiops I/O scheduler
Option to disable fsync

Fixing credits in repo, will fix OP later

joe2k01 said:
Fixing credits in repo, will fix OP later
Click to expand...
Click to collapse
What kernel manager do you suggest?

preference said:
What kernel manager do you suggest?
Click to expand...
Click to collapse
Kernel adiutor and LSpeed

When I try to flash both versions, I get error code 1 (something about a failure to repack the zip), Any idea what I'm doing wrong? I'm running the latest build of AOSP Extended.

Sraichvold said:
When I try to flash both versions, I get error code 1 (something about a failure to repack the zip), Any idea what I'm doing wrong? I'm running the latest build of AOSP Extended.
Click to expand...
Click to collapse
Can you send a screenshot of TWRP flash log?

Why do you have reverted this ?
https://github.com/joe2k01/WhitePug...mmit/0b880e9d5aecc5d3d56dc7d2599ebe89856d640b
It's an important change, please correct your merge conflict instead revert all

scafroglia93 said:
Why do you have reverted this ?
https://github.com/joe2k01/WhitePug...mmit/0b880e9d5aecc5d3d56dc7d2599ebe89856d640b
It's an important change, please correct your merge conflict instead revert all
Click to expand...
Click to collapse
This change hasn't been published in a build, so it's a WIP. Be sure that you are in the right before posting please

joe2k01 said:
This change hasn't been published in a build, so it's a WIP. Be sure that you are in the right before posting please
Click to expand...
Click to collapse
Please correct autorship of this kernel

scafroglia93 said:
Please correct autorship of this kernel
Click to expand...
Click to collapse
Almost everything correct, just need to adjust last 2 or 3 commits

joe2k01 said:
Can you send a screenshot of TWRP flash log?
Click to expand...
Click to collapse
Is this what you need? (and thanks for replying)

Sraichvold said:
Is this what you need? (and thanks for replying)
Click to expand...
Click to collapse
Will try to fix this ASAP

joe2k01 said:
Will try to fix this ASAP
Click to expand...
Click to collapse
Thank you! I'm looking forward to using your kernel!

Hi, I just made a tg group for my kernels users. Here is link http://t.me/WhitePugKernels

Sraichvold said:
Thank you! I'm looking forward to using your kernel!
Click to expand...
Click to collapse
Did you retry to flash after a reboot? If yes and no success can you try this:
Boot in recovery
Flash zip
Open a shell and type: cd /tmp/anykernel && ./anykernel.sh
Post output here

joe2k01 said:
Did you retry to flash after a reboot? If yes and no success can you try this:
Boot in recovery
Flash zip
Open a shell and type: cd /tmp/anykernel && ./anykernel.sh
Post output here
Click to expand...
Click to collapse
Here's what I get.

Sraichvold said:
Here's what I get.
Click to expand...
Click to collapse
Thank you. Did you flash any mod to the boot image. You are on AEX right? Are you sure you are flashing only V2?

[Kernel]StarCity_v2.0 kernel for ZUK Z1[ham][7.1.x][U-Touch Supported]

Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
Made yank battery profile as default for zzmoove
Added optimax governor
Added alucard governor
Increased rate of charging
Spectrum support
Vibrator intensity control.
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the latest zip from https://www.androidfilehost.com/?w=files&flid=197263
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
CHANGE IO SCHEDULER TO ZEN FOR BETTER BATTERY BACKUP.
ENABLE USB FASTCHARGE FROM KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in https://t.me/Srijith2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Update( 23/07/17):
No much changes in this one as I was little busy. Sorry!!!
Now u can actually control vibration intensity thorugh kernel tweaker
Added Governors:
Lionheart
Darkness
Dancedance
LZ4 Compression for faster booting.
Network speed enhanced.
Set governor to either zzmoove or nightmare and reduce maximum frequency around 1500 for better battery life.
If you feel phone is laggy increase the frequency!
Do report if you face any issue or if you need any new feature to be added.
V2.0
New build is up !!!
Link: https://www.androidfilehost.com/?fid=745425885120753737
Changelog:
UKM works perfectly (for synapse)*
Cleaned the zip file(fix for bootloop in aex and nr)
Added fpboost
Added FIOPS iosched
Added Alucard Hotplug*
*Governors can now be changed using synapse.
*Enable Alucard Hotplug for extreme battery saving. Device may slow down and lag. Increase max freq to keep it stable.
NOTE:
For better battery , set governor to zzmoove and max freq around 1.2k-1.5k and also keep 2 or 3 cpu's online .
For more feature request and issue report pm me!!
Will possibly change the bootsplash logo in next build .
Credits:
@ankurpandeyvns for helping with source
@Chaitanya @shubh84 for testing
@Anush12133 @Martichou
Source : https://gitlab.com/Srijith2001/StarCity_ham

Is it stable..??

It has yank battery extreme profile ??? it is good with zzmove governor.

himanshu fulmali said:
Is it stable..??
Click to expand...
Click to collapse
Yup

Safetynet isn't bypassing

Srijith Bharadwaj said:
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I decided to compile a kernel for this devices out of interest and also lack of development in kernel for it.
My aim is to make users happy by providing all the features possible.
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the zip from https://www.androidfilehost.com/?fid=961840155545580230
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in @SRIJITH2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Credits:
@ankurpandey for helping with source
@Chaitanya @sk284 for testing
Click to expand...
Click to collapse
was it a rom or something else am on nogat lineage os 14.1 and my fingerprint was not working actually there no option to unlock my phone with fingerprint any help with regarding that if it install this will it work

Bro whats your sot..??

sumanth26 said:
Safetynet isn't bypassing
Click to expand...
Click to collapse
Enable magisk hide root and try. If it doesnt then the feature is not present in the rom.
Depends on the rom also. Kernel supports safetyNet bypass but rom should have that feature to bypass.

himanshu fulmali said:
Bro whats your sot..??
Click to expand...
Click to collapse
6-7 hrs in RR

ashokram343 said:
was it a rom or something else am on nogat lineage os 14.1 and my fingerprint was not working actually there no option to unlock my phone with fingerprint any help with regarding that if it install this will it work
Click to expand...
Click to collapse
Its a kernel read op. Flash firmware and reflash the rom if have flashed nougat rom directly from lollipop.

Srijith Bharadwaj said:
Its a kernel read op. Flash firmware and reflash the rom if have flashed nougat rom directly from lollipop.
Click to expand...
Click to collapse
could you please give step by step information so that i wont make any mistakes please

ashokram343 said:
could you please give step by step information so that i wont make any mistakes please
Click to expand...
Click to collapse
Download nougat firmware.
Reboot to recovery
Wipe everything other than internal and otg
Flash nougat firmware and then flash the rom.
Fingerprint should work .
If not then fastboot cos and find if it works in it.
If it doesn't work in cos also then it's hardware issue.

Srijith Bharadwaj said:
Download nougat firmware.
Reboot to recovery
Wipe everything other than internal and otg
Flash nougat firmware and then flash the rom.
Fingerprint should work .
If not then fastboot cos and find if it works in it.
If it doesn't work in cos also then it's hardware issue.
Click to expand...
Click to collapse
hey thanks for the reply what is COS mean and one more thing i had installed mm nightlies fingerprint worked there

ashokram343 said:
hey thanks for the reply what is COS mean and one more thing i had installed mm nightlies fingerprint worked there
Click to expand...
Click to collapse
Cos is cyanogen os.
U wld have jumped directly from lollipop to nougat so u faced fingerprint issue. Now as u r back to marshmallow fingerprint is working. Now u can flash Nougat rom and u wll have fingerprint option.

Srijith Bharadwaj said:
Cos is cyanogen os.
U wld have jumped directly from lollipop to nougat so u faced fingerprint issue. Now as u r back to marshmallow fingerprint is working. Now u can flash Nougat rom and u wll have fingerprint option.
Click to expand...
Click to collapse
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option

ashokram343 said:
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
Click to expand...
Click to collapse
Flash zui 2.5 and then flash any other N roms

ashokram343 said:
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
Click to expand...
Click to collapse
Bro flash ham nougat firmware and then flash N rom. Your fingerprint should work after this.

Synapse
Srijith Bharadwaj said:
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I decided to compile a kernel for this devices out of interest and also lack of development in kernel for it.
My aim is to make users happy by providing all the features possible.
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the zip from https://www.androidfilehost.com/?fid=961840155545580230
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in Srijith2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Credits:
@ankurpandeyvns for helping with source
@Chaitanya @sk284 for testing
Source : https://github.com/Srijith2001/StarCity
Click to expand...
Click to collapse
Users reported that synapse wasn't working so i checked it and fixed it. Now u can download the new zip from https://www.androidfilehost.com/?fid=961840155545580384 . Use the same procedure to flash.
Sorry for the inconvenience caused.

I flashed the kernel on nuclearom 7.1.2 as instructed in the op by clearing cache and dalvik but it ended in a boot loop.
I did something wrong?

raza_maestro said:
I flashed the kernel on nuclearom 7.1.2 as instructed in the op by clearing cache and dalvik but it ended in a boot loop.
I did something wrong?
Click to expand...
Click to collapse
Some other users too faced this problem. I will check to it bro. Will be fixed in next build.

[KERNEL][N/O] Pure

disclaimer
your warranty is now void.
I am not responsible for bricked devices, dead sd cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this kernel
before flashing it! You are choosing to make these modifications, and if
you point the finger at me for messing up your device, i will laugh at you.
Please read completely this thread before using for minimize faq.
If you coming from other custom kernel, please restore to stock boot.img or dirty flash your rom before flash this!
Click to expand...
Click to collapse
Requirements
BACKUP your Boot.img and ROM Before flash this Kernel.
Unlock Bootloader as well
Latest Firmware
Latest TWRP
you need Wipe dalvik/art cache
Features
Using Official XIAOMI Patch(part)
Support AOSP/Los (Nougat/Oreo)
24 Cpu Governors
13 i/o scheduler
all TCP schedulers
Overclocked CPU frequencies (BIG CPU upto 1.8GHz, LITTLE CPU upto 1.2GHz).
GPU overclock support upto 635MHz
Support F2FS only on AOSP Nougat/Oreo
KCAL advanced color control
Enable 50 MHz GPU Frequency
Software CRC control is Off
Implement DT2W/S2W
zram
Zwap
Frontswap
z3fold
Gentle fair sleepers
Arch power option
Better audio drivers
Enable chacha20
Add Qnovo Interface for QNS
intelli-Thermal
65hz screen
Simple GPU Algorithm.
dynamic sync control
CPU voltage control.
replace urandom pool with a CRNG
adrenoboost
add adreno_idler
added uksm
added usb force fast charge.
added sound control
add more hotplug:AutoSMP alucard zen_dicision msm_hotplug blu_plug thunderplug
added Wireguard
added boeffla wakelock blocker
added frandom
added fingerprint booster
more
Bugs ?
If you find bug, please go to GitHub and submit bug
Credits
(Not in order)
bitrvmpd
Nik001
Francisco Franko
LuizPauloDamaceno
Flar2
mostafa-z
LuanHalaiko
arter97
Vvr-RockStar
aviraxp
ryan-andri
HridayHS
Planet-X
djb77
Alucard_24
AshishM94
morogoku
Tell me if i miss someone else
Donations
i spend some hours to build this kernel. if you like my work you can buy me a coffee
ko-fi.com/imimzf
Downloads
t.me/pure_kernel
Source Code: github.com/imzf/pure
Status: Dev

Hi Dev , Will 65hz screen works on every redmi 4x Modal ?

Cybertron[emoji769 said:
;75941498]Hi Dev , Will 65hz screen works on every redmi 4x Modal ?
Click to expand...
Click to collapse
yes，65 is currently best, 66 will appear screen offset
通过我的 Redmi 4X 上的 Tapatalk发言

why there is no normal (without external login) download link?

szafa said:
why there is no normal (without external login) download link?
Click to expand...
Click to collapse
Because I don't have permission
通过我的 Redmi 4X 上的 Tapatalk发言

Waiting for reviews

Bootloop on miui eu dev 8.5.13 after change from Clarity 2.5

szafa said:
Bootloop on miui eu dev 8.5.13 after change from Clarity 2.5
Click to expand...
Click to collapse
Current support for miui is not very good, need to brush driver package. If you want to brush into another kernel, you must firs trestore to stock boot.img。
通过我的 Redmi 4X 上的 Tapatalk发言

In browsers based on chromium when watching a video, noticed artifacts, the same were on LH Kernel and simple kernel. Display Ebbg. They do not appear very often, in the form of a brief appearance of a gray bar in any part of the screen

imzf said:
Current support for miui is not very good, need to brush driver package. If you want to brush into another kernel, you must firs trestore to stock boot.img。
Click to expand...
Click to collapse
I restored stock kernel first, then flash your kernel and like befere i have bootlop. After that I flash Clarity kernel and all is ok.
btw. Your Topic is in wrong forum category.

Where download link?
Need link

Anybody please mirror the link..

he, sorry for my English.... you can do this kernel for PIE ARROW CUSTOM ROM 30 09 2018...THANKS

Anyone tested on Nougat? Will give trouble if we clear cache and dalvik and flash it over clarity?

Link?

Bro can you make kexec hardboot supported kernel.

What is meant by fingerprint booster?
Sent from my Redmi 4X using XDA Labs

miui support?

Did anyone tried this with pie???