disclaimer
your warranty is now void.
I am not responsible for bricked devices, dead sd cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this kernel
before flashing it! You are choosing to make these modifications, and if
you point the finger at me for messing up your device, i will laugh at you.
Please read completely this thread before using for minimize faq.
If you coming from other custom kernel, please restore to stock boot.img or dirty flash your rom before flash this!
Click to expand...
Click to collapse
Requirements
BACKUP your Boot.img and ROM Before flash this Kernel.
Unlock Bootloader as well
Latest Firmware
Latest TWRP
you need Wipe dalvik/art cache
Features
Using Official XIAOMI Patch(part)
Support AOSP/Los (Nougat/Oreo)
24 Cpu Governors
13 i/o scheduler
all TCP schedulers
Overclocked CPU frequencies (BIG CPU upto 1.8GHz, LITTLE CPU upto 1.2GHz).
GPU overclock support upto 635MHz
Support F2FS only on AOSP Nougat/Oreo
KCAL advanced color control
Enable 50 MHz GPU Frequency
Software CRC control is Off
Implement DT2W/S2W
zram
Zwap
Frontswap
z3fold
Gentle fair sleepers
Arch power option
Better audio drivers
Enable chacha20
Add Qnovo Interface for QNS
intelli-Thermal
65hz screen
Simple GPU Algorithm.
dynamic sync control
CPU voltage control.
replace urandom pool with a CRNG
adrenoboost
add adreno_idler
added uksm
added usb force fast charge.
added sound control
add more hotplug:AutoSMP alucard zen_dicision msm_hotplug blu_plug thunderplug
added Wireguard
added boeffla wakelock blocker
added frandom
added fingerprint booster
more
Bugs ?
If you find bug, please go to GitHub and submit bug
Credits
(Not in order)
bitrvmpd
Nik001
Francisco Franko
LuizPauloDamaceno
Flar2
mostafa-z
LuanHalaiko
arter97
Vvr-RockStar
aviraxp
ryan-andri
HridayHS
Planet-X
djb77
Alucard_24
AshishM94
morogoku
Tell me if i miss someone else
Donations
i spend some hours to build this kernel. if you like my work you can buy me a coffee
ko-fi.com/imimzf
Downloads
t.me/pure_kernel
Source Code: github.com/imzf/pure
Status: Dev
Hi Dev , Will 65hz screen works on every redmi 4x Modal ?
Cybertron[emoji769 said:
;75941498]Hi Dev , Will 65hz screen works on every redmi 4x Modal ?
Click to expand...
Click to collapse
yes，65 is currently best, 66 will appear screen offset
通过我的 Redmi 4X 上的 Tapatalk发言
why there is no normal (without external login) download link?
szafa said:
why there is no normal (without external login) download link?
Click to expand...
Click to collapse
Because I don't have permission
通过我的 Redmi 4X 上的 Tapatalk发言
Waiting for reviews
Bootloop on miui eu dev 8.5.13 after change from Clarity 2.5
szafa said:
Bootloop on miui eu dev 8.5.13 after change from Clarity 2.5
Click to expand...
Click to collapse
Current support for miui is not very good, need to brush driver package. If you want to brush into another kernel, you must firs trestore to stock boot.img。
通过我的 Redmi 4X 上的 Tapatalk发言
In browsers based on chromium when watching a video, noticed artifacts, the same were on LH Kernel and simple kernel. Display Ebbg. They do not appear very often, in the form of a brief appearance of a gray bar in any part of the screen
imzf said:
Current support for miui is not very good, need to brush driver package. If you want to brush into another kernel, you must firs trestore to stock boot.img。
Click to expand...
Click to collapse
I restored stock kernel first, then flash your kernel and like befere i have bootlop. After that I flash Clarity kernel and all is ok.
btw. Your Topic is in wrong forum category.
Where download link?
Need link
Anybody please mirror the link..
he, sorry for my English.... you can do this kernel for PIE ARROW CUSTOM ROM 30 09 2018...THANKS
Anyone tested on Nougat? Will give trouble if we clear cache and dalvik and flash it over clarity?
Link?
Bro can you make kexec hardboot supported kernel.
What is meant by fingerprint booster?
Sent from my Redmi 4X using XDA Labs
miui support?
Did anyone tried this with pie???
Related
LollipopExtended Kernel for LG L90 (-L.E.K.-)
It's not old buggy LollipopExtended, this kernel completely new and based on new LGE kernel sources - now IR port and all another works fine
General information
Author: Nikita Pro Android
What is it: stock kernel with added features, most of them can be disabled/enabled on your own.
For what ROM is it: any 5.0.2 STOCK-based ROM
Kernel version: 3.4.0
LGE source code version: v20b (the last available for G2 Mini & L90)
Kernel toolchain: official last google ARM-EABI-4.8
Changes in kernel:
1) Added GPU overclock (533 MHz)
2) Added RAM overclock (566 MHz)
3) Added new CPU frequency: 499 MHz.
4) Added new GPU governor: conservative
5) Fixed simple_ondemand GPU governor crash - now it's working fine
6) Added Simple GPU Algorithm by Faux123 - additional for msm_adreno-tz GPU governor.
7) Some tweaks for GPU drivers - now it displays not visible before the "zero" GPU frequency 19 MHz
8) Added new CPU governors: conservative (already was in kernel, just enabled), interactive (already was in kernel, just enabled), pegasusQ, wheathley, zzmove, intellidemand, intelliactive, intellimm
9) Added INTELLI_PLUG & Alcucard_hotplug
(analogs for standart MPDesicion)
10) Added new I/O shedulers: cfq,
sio, sioplus, fiops, fifo, vr, zen
11) Added USB forced fast charge V2 (now there's no bug with charging battery icon after unplugging phone)
12) Added KSM Page Check (kernel object which check if page already has scanned)
13) Added Dynamic FSync (fs tweak)
14) Added powersuspend v1.5 (new google driver for autosleep - configure in Kernel Auditor -> Misc Controls -> Power Suspend Mode, set on "autosleep").
15) Added some minor tweaks and optimizations (NOT any -O3 "super" optimizations which just add bugs and random reboots)
v2.0:
16) Updated RAMdisks (D410 - V20D, D405/D405n - V20C)
17) Added support for init.d (to enable write in build.prop sys.init.d=on)
18) Added support for Faux Sound Control
19) Added many new TCP algorithms (by default "cubic")
20) Applied some kernel patches from codeuarora forum (caf)
Download:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LG D410 (two SIM variant): https://yadi.sk/d/LSbpc0vUmrNET
LG D405/D405n : https://yadi.sk/d/iPoxqfCPmrNEf
ALL VERSIONS (folder): https://yadi.sk/d/zSE0Dqh0iDrQM
Installation:
Before installation it's recommend to delete all apps for kernel set up to avoid conflicts.
1) Be sure that you have LG L90 model D410 or D405.
2) Be sure that you have 5.0.2 STOCK-based ROM.
3) Download .zip from spoiler above.
4) Go to recovery.
5) Do wipe cache.
6) Install downloaded .zip.
7) Reboot, wait until system will fully load.
8) Reboot again, wait until system will fully load.
9) Install Kernel Auditor and set up kernel as you like or just enjoy sun at the window
To set up kernel on your phone I recommend to use: Kernel Adiutor - Google Play link
XDA:DevDB Information
LollipopExtendedKernel, Kernel for the LG Optimus L90
Contributors
Nikita Pro Android, faux123, Attack11
Source Code: https://github.com/NikitaProAndroid/android_kernel_lge_qualcomm_msm8226
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2015-08-02
Created 2015-08-02
Last Updated 2016-01-22
¯\_{ツ}_/¯
Is this real or another fake OC?
ANYWAY, good job
It for D415?
judas1977 said:
Is this real or another fake OC?
ANYWAY, good job
Click to expand...
Click to collapse
I think it's only fake again. I applied the OC to my Stormy Sea kernel, but no GPU result differences in benchmark tests.
judas1977 said:
Is this real or another fake OC?
ANYWAY, good job
Click to expand...
Click to collapse
GPU overclock not locked but it's too little difference between 450 and 533 MHz so you will not see it. You can set 450 as max freq, what's the problem?
0967894983 said:
It for D415?
Click to expand...
Click to collapse
What Software version do you have? I need boot.img from last V20x for D415 and I'll can make kernel for you.
Nikita Pro Android said:
GPU overclock not locked but it's too little difference between 450 and 533 MHz so you will not see it. You can set 450 as max freq, what's the problem?
Click to expand...
Click to collapse
I don't have any problems because i don't use that kernel.
Just asking.
judas1977 said:
I don't have any problems because i don't use that kernel.
Just asking.
Click to expand...
Click to collapse
So are You satisfied with the answer?
Knowing you? I didn't expect that much.
judas1977 said:
Knowing you? I didn't expect that much.
Click to expand...
Click to collapse
Don't understand what you meaned. Anyway, let's close offtop.
judas1977 said:
Knowing you? I didn't expect that much.
Click to expand...
Click to collapse
you can't criticize anyone, you have builded a dozen of rom and none of these are fully working, so stop complaining in others contributions that really works
I was reffering to his answer, not to his work.
And, actually, i think that @Nikita Pro Android is doing really great thing in this kernel sources, really. He fixed some errors, which affect even custom ROM's kernel. This kernel could be a really, really great thing for the stock users. That's not the point. But, basically, you're right, sorry @OP
EDIT:
@OP
Which file contains "real" v20b sources? Because when i unpack one - it's v20a inside (kernel sources)?
judas1977 said:
EDIT:
@OP
Which file contains "real" v20b sources? Because when i unpack one - it's v20a inside (kernel sources)?
Click to expand...
Click to collapse
L90 kernel sources are v20a inside "v20b" archive. G2 Mini kernel sources are v20b inside "v20b" archive and have many additions and fixes (compared with L90 sources) so I used them.
I'm very sorry -4pda users found bugs that sensors (Accelerometer, Magnetic and Proximity) not worked on L90 devices. I'll try to fix it.
@up
Did they tell you which variant they have tested?
I used your v20b commit on my own project(didn't know where did you take that update before) and sensors work good on d405n.
I don't think that other changes in your sources could affect our device - L90.
I use the kernel on KitKat but i don't think it's the problem here...
Nikita Pro Android said:
I'm very sorry -4pda users found bugs that sensors (Accelerometer, Magnetic and Proximity) not worked on L90 devices. I'll try to fix it.
Click to expand...
Click to collapse
With me it's working perfectly. Not a simple fault.
Sent from my LG-D405 using XDA Free mobile app
judas1977 said:
@up
I used your v20b commit on my own project(didn't know where did you take that update before)
Click to expand...
Click to collapse
It's sources overlay which I did to see LG changes in each revision.
I need some help.. I change min cpu frequency to 300 MHz and tick apply on boot but it always changes to 700MHz even without reboot.. Is there any chance to make this work? changing governor for example (using on demand)
My Phone is d405n
Warimation said:
I need some help.. I change min cpu frequency to 300 MHz and tick apply on boot but it always changes to 700MHz even without reboot.. Is there any chance to make this work? changing governor for example (using on demand)
My Phone is d405n
Click to expand...
Click to collapse
open your build.prop and search for this string "ro.min_freq"
replace the value 787000 with 300000
then reboot
KaminariKernel
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now more void than it already was.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply grab my popcorn and laugh at you.
*
* Tl;dr: if your device crashes and burns, and if that gets you in trouble, it's entirely your fault. [STRIKE]Might be my fault as well, because I'm not a developer, but I don't care. lol[/STRIKE]
*/
Hey folks!
After being a Falcon exclusive for quite a long time, KaminariKernel's LineageOS edition is now available for Peregrine. Have fun.
Features:
Sources & Optimizations
- Based on Lineage's shared falcon/peregrine/titan/thea sources
- Compiled with Linaro 4.9
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- MSM Hotplug
Click to expand...
Click to collapse
Extra CPU Governors
- Impulse
- Smartmax
- Yankactive
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- Simple GPU Algorithm
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- CPU Overclock (up to 1.6 GHz) (Overclocked version only)
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Unified Marshmallow & Nougat (CM/LineageOS 13 & 14.x)
Click to expand...
Click to collapse
Looking for previous releases?
Go here.
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- Reboot again and have fun!
Coming from another kernel which isn't mine? Don't worry, no need to dirty flash the ROM/kernel anymore. The install script now does all the dirty work for you.
If you wanna tweak stuff, use Kernel Adiutor! (Synapse is NOT supported!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo
- Qualcomm/CodeAurora
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (AOSP/LineageOS, Peregrine), Kernel for the Moto G
Contributors
Kamin4ri
Source Code: https://github.com/Kamin4ri/KaminariKernel/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R4
Stable Release Date: 2018-03-04
Created 2016-11-21
Last Updated 2018-03-04
Reserved
Reserved
RESERVED!!!
Reserved too
The standard R1-M release is now available. The others shall be available soon.
Good job m8.
Does it feature the CPU overclock?
What is the difference between Standard and Alternative version? I know there says what is the difference but I want to know how will that affect phone. And which is better for battery life? And why no extra governors? Just curious. Anyways thanks for your hard work! Flashed the Alternative version and no problems so far
Edit: Tried installing Standard version, now the Hotplug menu in Kernel Adiutor is gone, that's intended right?
Edit2: I have a problem, sometimes my phone gets stuck and I have to reboot pressing power button for like 10 seconds. Also happenned that it was locked and led was blinking but I couldnt unlock the phone, black screen. Also happenned since I installed this kernel.
Fedray said:
What is the difference between Standard and Alternative version? I know there says what is the difference but I want to know how will that affect phone. And which is better for battery life? And why no extra governors? Just curious. Anyways thanks for your hard work! Flashed the Alternative version and no problems so far
Edit: Tried installing Standard version, now the Hotplug menu in Kernel Adiutor is gone, that's intended right?
Edit2: I have a problem, sometimes my phone gets stuck and I have to reboot pressing power button for like 10 seconds. Also happenned that it was locked and led was blinking but I couldnt unlock the phone, black screen. Also happenned since I installed this kernel.
Click to expand...
Click to collapse
I'm still thinking about putting extra governors. You went from Alternative to Standard, right? Then no, it shouldnt be gone. I must've done a typo in the updater-script (actually, i did just that, but fixed - hopefully - in R2). And about your phone locking up, could you send me a log or something? (Preferably dmesg)
Kernels updated to R2. Yeah, I skipped R1-N. It was built but i forgot to upload it. It had a messed-up installer script anyway.
Kamin4ri said:
Kernels updated to R2. Yeah, I skipped R1-N. It was built but i forgot to upload it. It had a messed-up installer script anyway.
Click to expand...
Click to collapse
Installed standard version r2, CPU hotplug menu still not available. Working with alternative version.
Enviado desde mi XT1040 mediante Tapatalk
Release 3 is now available! This one supports both Marshmallow and Nougat (single zip for both).
Changes:
- Synced with latest CM (Lineage) source code
- Build optimizations from kwoktopus
- Built with Linaro 6.2
You'll find the download links at the OP.
I'm in Resurrección Remix Marshmallow, this kernel should works? Sorry my bad english
[email protected] said:
I'm in Resurrección Remix Marshmallow, this kernel should works? Sorry my bad english
Click to expand...
Click to collapse
Of course!
Does this kernel support ExFat ?, thanks in advance.
J0hnick said:
Does this kernel support ExFat ?, thanks in advance.
Click to expand...
Click to collapse
It does support it via Filesystem in Userspace (FUSE). But the ROM must have an exFAT FUSE driver, and be able to actually recognise and mount USB sticks or memory cards formatted to the exFAT filesystem. CM and its derivatives/forks fulfill both requirements, whilst the stock firmware fulfills neither (even if you install fuse-exfat binaries, your USB stick or memory card won't automount because the version of vold which is shipped within the stock firmware doesn't support exFAT - you'll have to mount it manually via command line).
I've tried to implement exFAT support by using a kernel driver, but it didn't work well. That was a long time ago
Why did you remove the overclock? Which version has overclocked?
Sent from my XT1040 using XDA-Developers Legacy app
The cell phone gets very hot, the processor frequency drops to 1094mhz and 998mhz, and it gets very slow. Can you disable SoC's Temperature Control?
Joel Oliveira said:
The cell phone gets very hot, the processor frequency drops to 1094mhz and 998mhz, and it gets very slow. Can you disable SoC's Temperature Control?
Click to expand...
Click to collapse
Kernel Auditor is your friend
@Kamin4ri, I found on your AFH dev page the R4 version of this kernel, build date January 31, a bit old & not posted here, yet. Thinking of flashing it on my peregrine running RR N 5.8.2, is it safe enough ?
Since you haven't posted it here, I thought it maybe an experimental kernel & not stable enough.
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
Made yank battery profile as default for zzmoove
Added optimax governor
Added alucard governor
Increased rate of charging
Spectrum support
Vibrator intensity control.
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the latest zip from https://www.androidfilehost.com/?w=files&flid=197263
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
CHANGE IO SCHEDULER TO ZEN FOR BETTER BATTERY BACKUP.
ENABLE USB FASTCHARGE FROM KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in https://t.me/Srijith2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Update( 23/07/17):
No much changes in this one as I was little busy. Sorry!!!
Now u can actually control vibration intensity thorugh kernel tweaker
Added Governors:
Lionheart
Darkness
Dancedance
LZ4 Compression for faster booting.
Network speed enhanced.
Set governor to either zzmoove or nightmare and reduce maximum frequency around 1500 for better battery life.
If you feel phone is laggy increase the frequency!
Do report if you face any issue or if you need any new feature to be added.
V2.0
New build is up !!!
Link: https://www.androidfilehost.com/?fid=745425885120753737
Changelog:
UKM works perfectly (for synapse)*
Cleaned the zip file(fix for bootloop in aex and nr)
Added fpboost
Added FIOPS iosched
Added Alucard Hotplug*
*Governors can now be changed using synapse.
*Enable Alucard Hotplug for extreme battery saving. Device may slow down and lag. Increase max freq to keep it stable.
NOTE:
For better battery , set governor to zzmoove and max freq around 1.2k-1.5k and also keep 2 or 3 cpu's online .
For more feature request and issue report pm me!!
Will possibly change the bootsplash logo in next build .
Credits:
@ankurpandeyvns for helping with source
@Chaitanya @shubh84 for testing
@Anush12133 @Martichou
Source : https://gitlab.com/Srijith2001/StarCity_ham
Is it stable..??
It has yank battery extreme profile ??? it is good with zzmove governor.
himanshu fulmali said:
Is it stable..??
Click to expand...
Click to collapse
Yup
Safetynet isn't bypassing
Srijith Bharadwaj said:
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I decided to compile a kernel for this devices out of interest and also lack of development in kernel for it.
My aim is to make users happy by providing all the features possible.
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the zip from https://www.androidfilehost.com/?fid=961840155545580230
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in @SRIJITH2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Credits:
@ankurpandey for helping with source
@Chaitanya @sk284 for testing
Click to expand...
Click to collapse
was it a rom or something else am on nogat lineage os 14.1 and my fingerprint was not working actually there no option to unlock my phone with fingerprint any help with regarding that if it install this will it work
Bro whats your sot..??
sumanth26 said:
Safetynet isn't bypassing
Click to expand...
Click to collapse
Enable magisk hide root and try. If it doesnt then the feature is not present in the rom.
Depends on the rom also. Kernel supports safetyNet bypass but rom should have that feature to bypass.
himanshu fulmali said:
Bro whats your sot..??
Click to expand...
Click to collapse
6-7 hrs in RR
ashokram343 said:
was it a rom or something else am on nogat lineage os 14.1 and my fingerprint was not working actually there no option to unlock my phone with fingerprint any help with regarding that if it install this will it work
Click to expand...
Click to collapse
Its a kernel read op. Flash firmware and reflash the rom if have flashed nougat rom directly from lollipop.
Srijith Bharadwaj said:
Its a kernel read op. Flash firmware and reflash the rom if have flashed nougat rom directly from lollipop.
Click to expand...
Click to collapse
could you please give step by step information so that i wont make any mistakes please
ashokram343 said:
could you please give step by step information so that i wont make any mistakes please
Click to expand...
Click to collapse
Download nougat firmware.
Reboot to recovery
Wipe everything other than internal and otg
Flash nougat firmware and then flash the rom.
Fingerprint should work .
If not then fastboot cos and find if it works in it.
If it doesn't work in cos also then it's hardware issue.
Srijith Bharadwaj said:
Download nougat firmware.
Reboot to recovery
Wipe everything other than internal and otg
Flash nougat firmware and then flash the rom.
Fingerprint should work .
If not then fastboot cos and find if it works in it.
If it doesn't work in cos also then it's hardware issue.
Click to expand...
Click to collapse
hey thanks for the reply what is COS mean and one more thing i had installed mm nightlies fingerprint worked there
ashokram343 said:
hey thanks for the reply what is COS mean and one more thing i had installed mm nightlies fingerprint worked there
Click to expand...
Click to collapse
Cos is cyanogen os.
U wld have jumped directly from lollipop to nougat so u faced fingerprint issue. Now as u r back to marshmallow fingerprint is working. Now u can flash Nougat rom and u wll have fingerprint option.
Srijith Bharadwaj said:
Cos is cyanogen os.
U wld have jumped directly from lollipop to nougat so u faced fingerprint issue. Now as u r back to marshmallow fingerprint is working. Now u can flash Nougat rom and u wll have fingerprint option.
Click to expand...
Click to collapse
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
ashokram343 said:
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
Click to expand...
Click to collapse
Flash zui 2.5 and then flash any other N roms
ashokram343 said:
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
Click to expand...
Click to collapse
Bro flash ham nougat firmware and then flash N rom. Your fingerprint should work after this.
Synapse
Srijith Bharadwaj said:
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I decided to compile a kernel for this devices out of interest and also lack of development in kernel for it.
My aim is to make users happy by providing all the features possible.
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the zip from https://www.androidfilehost.com/?fid=961840155545580230
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in Srijith2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Credits:
@ankurpandeyvns for helping with source
@Chaitanya @sk284 for testing
Source : https://github.com/Srijith2001/StarCity
Click to expand...
Click to collapse
Users reported that synapse wasn't working so i checked it and fixed it. Now u can download the new zip from https://www.androidfilehost.com/?fid=961840155545580384 . Use the same procedure to flash.
Sorry for the inconvenience caused.
I flashed the kernel on nuclearom 7.1.2 as instructed in the op by clearing cache and dalvik but it ended in a boot loop.
I did something wrong?
raza_maestro said:
I flashed the kernel on nuclearom 7.1.2 as instructed in the op by clearing cache and dalvik but it ended in a boot loop.
I did something wrong?
Click to expand...
Click to collapse
Some other users too faced this problem. I will check to it bro. Will be fixed in next build.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WhitePugKernel by joe2k01Based on OpenKirin's source, you'll have same bugs as in RROS
How to install:
Download the flashable zip
Boot in TWRP
Flash zip
Reboot and you're done
Feautures:
Added blu active governor
Added alucard governor
Added darkness governor
Added bioshock governor
MSDOS fylesystem support
HFS filesystem support
HFS+ filesystem support
zen I/O scheduler
sio I/O scheduler
fiops I/O scheduler
tripndroid I/O scheduler
Option to disable fsync
Disabled detection of unclocked bootloader bt SafetyNet
Faster fingerprint wakeup
Nvidia power patches
Take care because I don't own the device, it has been tested anyway
Donate to IARC or SaveTheChildren
https://www.iarc.fr/en/about/donations.php
http://www.savethechildren.org
Downloads:
V1: Download
V2: Download
XDA:DevDB Information
WhitePugKernel for the Honor 8 Pro, Kernel for the Honor 8 Pro
Contributors
joe2k01
Source Code: https://github.com/joe2k01/WhitePugKernel-huawei_hi3660
Kernel Special Features:
Version Information
Status: Testing
Created 2017-07-08
Last Updated 2017-07-12
Fast work there man.
Sent from my Honor 8 using XDA Labs
Thanks for your work.
Im unable to flash the zip... It says unsupported device.
Got the DUK-L09C432 model
Cheers
smouker said:
Thanks for your work.
Im unable to flash the zip... It says unsupported device.
Got the DUK-L09C432 model
Cheers
Click to expand...
Click to collapse
Thank you for testing. Can you send me your build.prop and I'll fix? Probably I used wrong device name for secure flash.
---EDIT---
Sorry I just realised I linked Honor 8 kernel instead of 8 Pro, going to fix op
OP is fixed, now you shouldn't have any problem @smouker
joe2k01 said:
OP is fixed, now you shouldn't have any problem @smouker
Click to expand...
Click to collapse
Thank you for your work.
I was able to flash the kernel.
Cheers
smouker said:
Thank you for your work.
I was able to flash the kernel.
Cheers
Click to expand...
Click to collapse
Well, report back your experience please :highfive:
joe2k01 said:
Well, report back your experience please :highfive:
Click to expand...
Click to collapse
Fingerprint sensor is faster! Currtently im using I/O-Scheduler Zen an 1024 Readahead.
I underclocked both CPU groups and so far the Phone is still stable
Thank you for your work!
New build released:
Bioshock governor
Tripndroid scheduler
Nvidia power patches
Fixing credits in repo, will fix OP later
Support for both Stock and Custom or just Custom??
FixerZ said:
Support for both Stock and Custom or just Custom??
Click to expand...
Click to collapse
Both.
FixerZ said:
Support for both Stock and Custom or just Custom??
Click to expand...
Click to collapse
On stock you'll have bugs like no SD card and buggy camera
can you make dt2w in this kernel?
Ruppi64 said:
can you make dt2w in this kernel?
Click to expand...
Click to collapse
It is already in kernel, I just need a proper way to activate it
joe2k01 said:
It is already in kernel, I just need a proper way to activate it
Click to expand...
Click to collapse
That would be good, then synonymous times the lockscreen a sense:good:
Ruppi64 said:
That would be good, then synonymous times the lockscreen a sense:good:
Click to expand...
Click to collapse
Yeah but I have to investigate a bit
Hi, I just made a tg group for my kernels users. Here is link http://t.me/WhitePugKernels
joe2k01 said:
It is already in kernel, I just need a proper way to activate it
Click to expand...
Click to collapse
I have tried dt2w times after this guidance https://forum.xda-developers.com/mate-9/how-to/enable-double-tap-to-wake-mate-9-t3580764
But unfortunately I have only the option under motion control dt2w and dt2s with firmware DUK-L09C432B130
Otherwise no function
Ruppi64 said:
I have tried dt2w times after this guidance https://forum.xda-developers.com/mate-9/how-to/enable-double-tap-to-wake-mate-9-t3580764
But unfortunately I have only the option under motion control dt2w and dt2s with firmware DUK-L09C432B130
Otherwise no function
Click to expand...
Click to collapse
That guide is for EMUI only. Anyway I may be wrong
Code:
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Welcome to Phoenix Kernel for A71. This kernel aims to be up-to-date with the latest 4.14 Kernel patches and to slightly improve the performance of your phone. Keep in mind that I don't own an A71 myself, so the amount of features I can add is limited. I try my best to do something good without the device.
Features:
- Removed Samsung's useless security features (considered as bloat when you root your phone)
- Removed some kernel debugging which is useless for a performance oriented kernel
- Upstreamed to version 4.14.231 (originally from 4.14.190)
- Enabled Pressure Stall Information instead of Low Memory Killer. This is a requirement of Android 11 and should improve RAM utilization (more about it here)
- Built using O3 optimizations and QCOM Clang 10.0.9 (Stock kernel uses O2 and 10.0.7)
- KCAL Color Control support (accessible via Kernel Adiutor, SmartPack etc.)
-Removed VLA Usage (here is what it means)
Prerequisites:
Your phone already is rooted, and you have installed TWRP
You are on Android 11
How to install:
Download the boot.img to your phone
Reboot to TWRP
Go to Install > Install Image > Navigate to your downloaded boot.img > Boot > Swipe to install
Flash Magisk zip and reboot
Links
Download link: Mod edit: DL link removed
Kernel Source: GitHub
Big, big, big work. I install Phoenix Kernel for Galaxy A71 no problem.
Ole your balls.
Big, big, big work. I install Phoenix Kernel for OnePlus 8T no problem.
Ole your balls.
Big, big, big work. I install Phoenix Kernel for Redmi Note 9 Pro no problem.
Ole your balls.
Nice work brah!!
installed kernel on Realme6pro having 120hz working now
Ole .... ....
Very good. Ole your balls.
WTF all this odd messages ??
viktor92 said:
WTF all this odd messages ??
Click to expand...
Click to collapse
I forgot to mention. Yes you will get an "unknown error with your device" at boot. I still can't figure out how to fix it, but just know that there is nothing wrong with your phone
renoxtv said:
I forgot to mention. Yes you will get an "unknown error with your device" at boot. I still can't figure out how to fix it, but just know that there is nothing wrong with your phone
Click to expand...
Click to collapse
If you are using Phoenix kernel this is normal, but don't worry.
EDIT: now I see that I replied to the kernel creator hahaha
renoxtv said:
I forgot to mention. Yes you will get an "unknown error with your device" at boot. I still can't figure out how to fix it, but just know that there is nothing wrong with your phone
Click to expand...
Click to collapse
please add KCAL color control in next update
@renoxtv Can you add new cpu governors, or the capability to increase the scheduler readahead memory ?
Phoenix v1.1 has been released. New download link in OP.
Changelog:
Kernel version v4.14.230 > v4.14.231
Fixed warning message at boot
Removed VLA Usage (info in OP)
Removed more debugging options, including selinux auditing (logging)
Added KCAL Color Control support
@viktor92, I will try to add the features you asked for in the next version
renoxtv said:
Phoenix v1.1 has been released. New download link in OP.
Changelog:
Kernel version v4.14.230 > v4.14.231
Fixed warning message at boot
Removed VLA Usage (info in OP)
Removed more debugging options, including selinux auditing (logging)
Added KCAL Color Control support
@viktor92, I will try to add the features you asked for in the next version
Click to expand...
Click to collapse
Thank you bro
You are wonderful.
Can you please give the overclockable version of the kernel ASAP
Let me Overclock my GPU to 810MHz and CPU to at least, 2.3GHz.
This is tested as safe, since the Snapdragon 732G have those clocks and it is the same as the snapdragon 730G that the A71 uses.
Zylon77777 said:
Can you please give the overclockable version of the kernel ASAP
Let me Overclock my GPU to 810MHz and CPU to at least, 2.3GHz.
This is tested as safe, since the Snapdragon 732G have those clocks and it is the same as the snapdragon 730G that the A71 uses.
Click to expand...
Click to collapse
The stock GPU frequency is 500 Mhz, how can be "safe" to overclock more than 60% ???.
And the 730G has a GPU frequency of 575 Mhz...
viktor92 said:
The stock GPU frequency is 500 Mhz, how can be "safe" to overclock more than 60% ???.
And the 730G has a GPU frequency of 575 Mhz...
Click to expand...
Click to collapse
My stock GPU frequency is 700MHz it seems
Zylon77777 said:
Can you please give the overclockable version of the kernel ASAP
Let me Overclock my GPU to 810MHz and CPU to at least, 2.3GHz.
This is tested as safe, since the Snapdragon 732G have those clocks and it is the same as the snapdragon 730G that the A71 uses.
Click to expand...
Click to collapse
As far as I understand this phone has the normal 730 not the 730g am I correct?
Tried this over Ncx 3.1.2 and my phone got into bootloop. Then I reinstalled the rom, but now I can't connect to my Samsung account.
Is there a way to uninstall this kernel and go back to stock or solve the samsung account without factory data?
sougat123 said:
Tried this over Ncx 3.1.2 and my phone got into bootloop. Then I reinstalled the rom, but now I can't connect to my Samsung account.
Is there a way to uninstall this kernel and go back to stock or solve the samsung account without factory data?
Click to expand...
Click to collapse
Yes flash boot.img from ncx rom via twrp
This kernel has some problem and my phone suffered from death today on May 25, 2021.