Introduction
TWRP 3.1.1-0 for MI MAX 2 built under LineageOS 14.1 source, everything is up to date as of this package is released ("adb push" is faster in adbd of 14.x)
Click to expand...
Click to collapse
Images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Click "Screenshots" on top left for more)
Click to expand...
Click to collapse
Downloads
https://mega.nz/#F!F2IXWa7A!6UDn-Js6aqBfWG7EVJHn2Q
or: Download Link: http://pan.baidu.com/s/1sl8r1dN | Password: lhys
Click to expand...
Click to collapse
Installation instructions
Download recovery***.img and rename it to recovery.img
Unlock bootloader >>
boot into fastboot mode by holding Volume Down during power on (or reboot)
Code:
fastboot flash recovery recovery.img
fastboot reboot
Click to expand...
Click to collapse
Features
Mostly built from source
Tweaked and Built for Max2 (oxygen), not for mido
Extra fonts (Chinese etc) are enabled
Crypto is enabled, can access /data without wiping it
Click to expand...
Click to collapse
Warning: Although this is designed for Max 2, this project is in Alpha test status.
XDA:DevDB Information
TWRP, Tool/Utility for the Xiaomi Mi Max 2
Contributors
xuefer
Version Information
Status: Testing
Current Stable Version: 3.1.1-0
Stable Release Date: 2017-08-13
Beta Release Date: 2017-08-13
Created 2017-07-10
Last Updated 2017-08-13
Current version: 20170813 TWRP 3.1.1-0
Warning: Although this is designed for Max 2, this project is in Alpha test status.
Please report any issue you have found using this TWRP recovery.
Known issue: will be overwritten by official system/recovery (seems fixed in 20170712)
but MIUI refuse to boot up if even 1 file is changed in /system
xuefer said:
Download Link: http://pan.baidu.com/s/1sl8r1dN
Password: lhys
Warning: Although this is designed for Max 2, this project is in Alpha test status.
Known issue: will be overwritten by official rom into recovery
Click to expand...
Click to collapse
Sorry, what is this? TWRP or an new ROM? and can you pls it upload to Mega?
Skorpi58 said:
Sorry, what is this? TWRP or an new ROM? and can you pls it upload to Mega?
Click to expand...
Click to collapse
It's TWRP as the title stated. LineageOS for MAX2 is still in develop. Mega was too slow for me
xuefer said:
It's TWRP as the title stated. LineageOS for MAX2 is still in develop. Mega was too slow for me
Click to expand...
Click to collapse
The title say TWRP, but OP says ROM?
XDAevDB Information
TWRP, ROM for the Xiaomi Mi Max 2
Contributors
xuefer
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: TWRP
Version Information
Status: Testing
Beta Release Date: 2017-07-11
Created 2017-07-10
Last Updated 2017-07-10
Skorpi58 said:
The title say TWRP, but OP says ROM?
Click to expand...
Click to collapse
thanks. there is no category as "Recovery", i'd pick util/tools
xuefer said:
It's TWRP as the title stated. LineageOS for MAX2 is still in develop. Mega was too slow for me
Click to expand...
Click to collapse
and from where you have the info, that L-OS is still in develop for the Mi Max 2 pls?
Skorpi58 said:
and from where you have the info, that L-OS is still in develop for the Mi Max 2 pls?
Click to expand...
Click to collapse
because I'm the one doing it, unless someone else too
xuefer said:
because I'm the one doing it, unless someone else too
Click to expand...
Click to collapse
Ooooo thanks.... I am very glad to hear that....and when can we count on it?
For this part "Known issue: will be overwritten by official system/recovery". In what situations will this version of TWRP recovery be overwritten?
Thanks in advance
ikecomp said:
For this part "Known issue: will be overwritten by official system/recovery". In what situations will this version of TWRP recovery be overwritten?
Thanks in advance
Click to expand...
Click to collapse
When official ROM booted. no time to resolve this problem for now
I've uploaded the wrong TWRP image, if anyone's trying it please re-download
Any Xposed working on this device?
Hi,
I try several time to install twrp but at all time when I reboot on recovery mode I find the Mi-recovery 3.0 instead of twrp.
Hi,
Me, too, tried several time to install twrp
but at all time when I reboot on recovery mode
I find the Mi-recovery 3.0 instead of twrp.
Edit:
I added one step in between and it worked.
Cyber.Angel said:
Hi,
Me, too, tried several time to install twrp
but at all time when I reboot on recovery mode
I find the Mi-recovery 3.0 instead of twrp.
Click to expand...
Click to collapse
restart phone and try to hold vol up and vol down together
this twrp zcx? where i got
I have some OTG problem (seems to be mailfunctioning) I tried to see if it will work from TWRP, but it doesn't!
Can someone confirm it works on his Mi Max 2 (and this twrp).
Thanks in advance.
vandric said:
I have some OTG problem (seems to be mailfunctioning) I tried to see if it will work from TWRP, but it doesn't!
Can someone confirm it works on his Mi Max 2 (and this twrp).
Thanks in advance.
Click to expand...
Click to collapse
I don't have a USB-C OTG cable, so I can't test it... It should work, but if you say it doesn't then I will look into it.
Thanks for the feedback!
---------- Post added at 07:02 ---------- Previous post was at 07:02 ----------
mas.gun said:
this twrp zcx? where i got
Click to expand...
Click to collapse
ZCX TWRP is not available for the MI MAX 2 at the moment. Sorry!
Guys those of you who are using Los please install this app and let me know which features are enabled in Los? In miui only exposure control is enabled. Even though camera api 2 is enabled on this device.
is it ok for european BLACK version?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to the goodness of Oreo-Pie. This topic will be dedicated to our bring up of Oreo-Pie for Xiaomi Mi6.
While the feature list will be constantly updated, remember the ROM is in beta stage and would expect logs if you want to report issue.
An AOSP based ROM, with gapps included, and all Pixel stuffs (launcher, wallpapers, icons, fonts, bootanimation).
Xiaomi Mi6 Specific Feature Highlights:
Miui/Google camera
OTA UPDATE
Installation Steps:
Backup your existing apps and data
Boot to recovery
Wipe System
Wipe Userdata, if coming from another ROM
Flash firmware
Flash ROM
Flash Magisk for root (if you need)
Reboot
If after updating GoogleCamera photographs with a pink color, clear the data / cache in the settings of GoogleCamera applications.
Download Links:
ROM OFFICIAL - Click Here
Firmware 9.4.25- Click Here
Screenshots - Click Here
Support us by donating.
XDA DevDB Information
PixelExperience ROM for the Xiaomi Mi6
Contributors
Verevka, ShevT
Source Code: https://github.com/PixelExperience
ROM OS Version: 8.1-9.0
ROM Kernel: Linux 4.4.x
Version Information
Status: Official
Created 2018-02-03
Last Updated 2019-05-07
Any major bugs in this rom?
Thanks for bringing us so much goodness for our devices, I will wait for feedback from other users and switch from CrDroid if necessary.
IT'S BACK?
When magisk is flashed with the rom it fails to boot, without magisk it works fine. however on twrp my pin number does not work for decryption of storage. so i cannot flash magisk.
edit, I have sideloaded magisk but the twrp decryption issue remains.
Does it support volte?
littleantony said:
When magisk is flashed with the rom it fails to boot, without magisk it works fine. however on twrp my pin number does not work for decryption of storage. so i cannot flash magisk
Click to expand...
Click to collapse
Disable password lock in Rom
until there is an updated version of twrp where the encryption works (which is updated by Google)
littleantony said:
When magisk is flashed with the rom it fails to boot, without magisk it works fine. however on twrp my pin number does not work for decryption of storage. so i cannot flash magisk.
edit, I have sideloaded magisk but the twrp decryption issue remains.
Click to expand...
Click to collapse
I've got the same issues.Any suggestions??
p/snly removing PIN code to access TWRP.
I know that after few hours it's to early to jugde but overal, I haven't come across any FC or other bugs.
It works smooth and nice. no hangs or freeze.
The only thing is QC which is not works form me. after reboot, it starts for few second (as on photo) than change to max 1500 mAh
once again thanks verevka for your hard work
wojtoo said:
I know that after few hours it's to early to jugde but overal, I haven't come across any FC or other bugs.
It works smooth and nice. no hangs or freeze.
The only thing is QC which is not works form me. after reboot, it starts for few second (as on photo) than change to max 1500 mAh
once again thanks verevka for your hard work
Click to expand...
Click to collapse
Working fine here...
Sent from my MI 6 using Tapatalk
There is an unofficial TWRP for 8.1 that supports encryption.
I wonder if the major bug from the last release were fixed, High battery Drain, Camara issues and whatsapp issues.
wildger said:
There is an unofficial TWRP for 8.1 that supports encryption.
I wonder if the major bug from the last release were fixed, High battery Drain, Camara issues and whatsapp issues.
Click to expand...
Click to collapse
Can you post a link to that version?
Everlite92 said:
Can you post a link to that version?
Click to expand...
Click to collapse
Look for it on the Atomic-OS post. You will find it there, first post.
wildger said:
There is an unofficial TWRP for 8.1 that supports encryption.
I wonder if the major bug from the last release were fixed, High battery Drain, Camara issues and whatsapp issues.
Click to expand...
Click to collapse
I think there is a new "new" encryption now.
So was probably from the February security patches. Seems to require google code to be added to the TWRP sources and then built for Mi 6.
I'm thinking TheStrix might build official twrp soon or someone will fond a way to get an unofficial one working.
Work around for now is removing the password so there's no pin to decrypt in TWRP. (Can just enable and disable for recovery usage)
I can't boot up the rom, when i reboot from twrp after de Mi logo a orange screen appears with a message "ramdump partition not found". Anyone knows how to solve this?
Thanks!
EDIT: Solved! I've just wipe data and the rom works.
Rick_BR said:
I can't boot up the rom, when i reboot from twrp after de Mi logo a orange screen appears with a message "ramdump partition not found". Anyone knows how to solve this?
Thanks!
Click to expand...
Click to collapse
Did you follow the OP instructions??? Step by step?
Sent from my MI 6 using Tapatalk
Can anyone confirm if this ROM has the same keyboard stutter/micro-lags like the CrDroid 4.0?
Thanks in advance
allweknowisa said:
Can anyone confirm if this ROM has the same keyboard stutter/micro-lags like the CrDroid 4.0?
Thanks in advance
Click to expand...
Click to collapse
Using Gboard, no lags at all.
Sent from my MI 6 using Tapatalk
Most of import, how much of SOT?? That was the weakest point of the last release
Can i set double tab to sleep in this rom?
Team Win Recovery Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHAT IS TWRP ?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
Read more about TWRP here: https://twrp.me/about/
DOWNLOAD:
TWRP 3.2.1-0 for Mi Max 2
HOW TO INSTALL ?:
1) Be sure you have unlocked bootloader.
2) Download image file.
3) Reboot to fastboot.
4) Install using "fastboot flash recovery twrp-3.2.1-0-oxygen.img" command.
OR:
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
1) Download the latest version from our website on your device
2) Reboot to TWRP
3) Hit Install and tap the "Images..." button in the lower right
4) Browse to the location of the TWRP image on your device and select it
5) Select recovery from the partition list and swipe to flash
CONTRIBUTIONS:
Gerrit for TWRP: http://gerrit.omnirom.org/
Gerrit for officially supported devices: http://gerrit.twrp.me/
XDA:DevDB Information
Mi Max 2 Official TWRP Recovery, Tool/Utility for the Xiaomi Mi Max 2
Contributors
ataberkozen
Source Code: https://github.com/omnirom/android_bootable_recovery
Version Information
Status: Stable
Created 2018-04-23
Last Updated 2018-04-23
ah great i was actually waiting for an official thread from the maintainer himself adding this to the index as we speak
Wow! An official recovery! Thank you for the support!
Thank you so much:laugh:
Tested.
Flashed XENONHD ROM yesterday with gapps magisk etc...
Works great as TWRP usual
Thank you!
Im suprised .. my day is made.
Official twrp ..
Hope red wolf recovery also will get official support too
Wow starts 10 times faster now thank you looking forward to hiding them navigation buttons soon.
Finally official! :victory:
Does it have aroma support?
Tempete said:
Does it have aroma support?
Click to expand...
Click to collapse
Yes.
I really fcked up and installed updated version of TWRP (3.2.3.0 i think) on boot partition, and now phone boots only to TWRP.
Any help on this matter?
denis022 said:
I really fcked up and installed updated version of TWRP (3.2.3.0 i think) on boot partition, and now phone boots only to TWRP.
Any help on this matter?
Click to expand...
Click to collapse
tell us what rom u have installed, then extract boot image from that rom, transfer to phone in twrp via adb bridge and flash it to boot partition. or ask another user with same rom to provide boot image for you.
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
jbmc83 said:
tell us what rom u have installed, then extract boot image from that rom, transfer to phone in twrp via adb bridge and flash it to boot partition. or ask another user with same rom to provide boot image for you.
Click to expand...
Click to collapse
Now my tree is very stable but issue is ROM sources ..many times sources have soo many bugs and it's us who need to fix for these issue.
The night light, APN, FP..these were all ROM sources ISSUES which I have fixed in all rooms..by editing ROM sources..there is no symmetry in ROM sources which we sync..
So other devs whoever wants to build ROM will have tough time fixing those glitches..I know myself how I suffered lol and finally only in call volume ADJUSTMENT (PATHETIC OREO SOURCE) and led left.
ROM ORIGNAL SOURCES ARE NOT STABLE ENOUGH..AND THEY DO NOT SYNC UP WITH EACH OTHER.
Hard_Rock83 said:
Now my tree is very stable but issue is ROM sources ..many times sources have soo many bugs and it's us who need to fix for these issue.
The night light, APN, FP..these were all ROM sources ISSUES which I have fixed in all rooms..by editing ROM sources..there is no symmetry in ROM sources which we sync..
So other devs whoever wants to build ROM will have tough time fixing those glitches..I know myself how I suffered lol and finally only in call volume ADJUSTMENT (PATHETIC OREO SOURCE) and led left.
ROM ORIGNAL SOURCES ARE NOT STABLE ENOUGH..AND THEY DO NOT SYNC UP WITH EACH OTHER.
Click to expand...
Click to collapse
hey buddy, u sure uve quoted the correct post?
jbmc83 said:
hey buddy, u sure uve quoted the correct post?
Click to expand...
Click to collapse
Oops..i messed up..i was quoting inside lineage 14..as far as i remembered..but sorry for mess
Hard_Rock83 said:
Oops..i messed up..i was quoting inside lineage 14..as far as i remembered..but sorry for mess
Click to expand...
Click to collapse
haha no harm done. take it easy my man
jbmc83 said:
tell us what rom u have installed, then extract boot image from that rom, transfer to phone in twrp via adb bridge and flash it to boot partition. or ask another user with same rom to provide boot image for you.
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
Click to expand...
Click to collapse
Since I had rom img on internall storage, I just flashed rom again, and phone booted normally. I dont know is this proper solution for this kind of problem, but it worked for me :good:
Thanks Mac bro
Link Download OFF
Android OS version: 9.0.0_r10
For devices: Oneplus 6
Authors build: sakindia123
Source code: https://github.com/nitrogen-project
Developers: sakindia123,xyyx, wight554
Thanks: darkobas,ezio84, beanstown106, maxwen, @SyCreed and etc.
Google Apps: Open GAPPS
Recovery: TWRP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on AOSP
xyyx (Max) - main developer
Make sure you have Hydrogen OS/OOS Stable/Beta installed on both A and B slots!Rom will not boot with Oreo firmware
Wipe Data(if coming from another rom)
Flash rom zip followed by Twrp installer zip
Reboot recovery
Flash gapps and Magisk 17+
Reboot - 1st boot takes around 5 minutes.
Enjoy
Download Link- HERE
Nitrogen Project
Device config
Known Bugs:
* ??
Telegram Discussion Group- https://t.me/joinchat/KCIhQw_ufo_vCBV93_tcoQ
XDA:DevDB Information
NitrogenOS, ROM for the OnePlus 6
Contributors
sakindia123, sakindia123, xyyx
ROM OS Version: 9.0.0 Pie
ROM Kernel: Linux 4.9.130
ROM Firmware Required: OOS Pie firmware
Version Information
Status: Beta
Created 2018-09-19
Last Updated 2018-09-19
NOS injected OP6! Fast and fuuurious! Great to see you guys here!
Are there screenshots, which additional features come with this rom?
Used to run this on my 6P time to relive the greatness
Need features n screenshots excited bout this rom...???
I am running OOS beta 3 and I am decrypted, will I be ok to flash? cheers
vtec303 said:
I am running OOS beta 3 and I am decrypted, will I be ok to flash? cheers
Click to expand...
Click to collapse
My guess is no, given the OP specifies OB1 and OB2.
One word of caution: I had quite the time going from OB3 back to a ROM requiring OB2 firmware. The first flash was fine, Havoc 2 set up great. But the second time I flashed, presumably the partition with OB3 on it, I softbricked the device. Could only get bootloader, and couldn't install twrp via fastboot. Had to revert to stock Oreo with the .bat procedure to get a working device.
Hopefully no else has that little adventure!
reaper000 said:
My guess is no, given the OP specifies OB1 and OB2.
One word of caution: I had quite the time going from OB3 back to a ROM requiring OB2 firmware. The first flash was fine, Havoc 2 set up great. But the second time I flashed, presumably the partition with OB3 on it, I softbricked the device. Could only get bootloader, and couldn't install twrp via fastboot. Had to revert to stock Oreo with the .bat procedure to get a working device.
Hopefully no else has that little adventure!
Click to expand...
Click to collapse
Yeah... I had to use Msmtools to fix my phone when I soft bricked. Couldn't get past Qualcomm crash dump mode. Took 3 hours to finally figure out how to use it.
rom running great... thanks! loved the oreo work as well.
vtec303 said:
I am running OOS beta 3 and I am decrypted, will I be ok to flash? cheers
Click to expand...
Click to collapse
how did you decrypt it?
didicola said:
how did you decrypt it?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/how-to/test-decryption-t3818775
To OP: Rom is working flawlessly. One issue I faced is alert slider not working.
Edit:
After some time I found several minor issues
- Night light is not working
- Device theme is not working
- Colors shows nothing (just image, no list of selections)
- Also corners are without indent
Wow.. Atlast legendary rom came to op6 ?
Mr.RooT said:
https://forum.xda-developers.com/oneplus-6/how-to/test-decryption-t3818775
To OP: Rom is working flawlessly. One issue I faced is alert slider not working.
Edit:
After some time I found several minor issues
- Night light is not working
- Device theme is not working
- Colors shows nothing (just image, no list of selections)
- Also corners are without indent
Click to expand...
Click to collapse
So pretty much the same issues as other custom Roms?
mykenyc said:
So pretty much the same issues as other custom Roms?
Click to expand...
Click to collapse
Nah, alert slider works on most ROMs
Obamaloominaty said:
Nah, alert slider works on most ROMs
Click to expand...
Click to collapse
If I got it right it's just a matter of including it in the device tree. And as far as I've tested, the alert slider only works in LineageOS 16 since its tree is the only one to actually have the slider configs in it.
https://github.com/LineageOS/android_device_oneplus_sdm845-common/tree/lineage-16.0/KeyHandler
My guess is, also from my experience while trying to build AEX with that tree, that that folder has too many links to LineageOS and just flops when another rom is being built while that is in the device tree and calls for los stuff.
didicola said:
how did you decrypt it?
Click to expand...
Click to collapse
Read this thread...
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
didicola said:
how did you decrypt it?
Click to expand...
Click to collapse
followed the guide on the following thread but Keep in mind first time decrypting will wipe your internal drive, hope this helps.
https://forum.xda-developers.com/oneplus-6/how-to/tutorial-decrypt-flash-rom-pie-oreo-roms-t3838643
---------- Post added at 06:48 PM ---------- Previous post was at 06:45 PM ----------
reaper000 said:
My guess is no, given the OP specifies OB1 and OB2.
One word of caution: I had quite the time going from OB3 back to a ROM requiring OB2 firmware. The first flash was fine, Havoc 2 set up great. But the second time I flashed, presumably the partition with OB3 on it, I softbricked the device. Could only get bootloader, and couldn't install twrp via fastboot. Had to revert to stock Oreo with the .bat procedure to get a working device.
Hopefully no else has that little adventure!
Click to expand...
Click to collapse
Had a few adventures like that myself..lol, but thanks for the advice I will keep that in mind, cheers.
i've two questions:
It's a mandatory decrypt storage for install this rom?
Works if i've oxygen beta 3 as base or i must have nitrogen?
Toni Moon said:
i've two questions:
It's a mandatory decrypt storage for install this rom?
Works if i've oxygen beta 3 as base or i must have nitrogen?
Click to expand...
Click to collapse
No mandatory decrypt.
Use OB1 or OB2 as base (not OB3).
So there are NO Fastboot OB1, OB2, or OB3 files that flash firmware to both slots. What is the correct process on flashing to BOTH slots?
OnePlus 7 Open Beta for OnePlus 6!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(time to update pic..)
Features:
Stock OnePlus 7 OxygenOS Open Beta 12 / Android 10 Firmware
Debloated
Automated Flasher
Decrypted
Performance tweaks
Full GCam7 Support
What works:
Almost everything, check bugs!
Auto rotation works (Thanks to Marlon for telling me!)
What doesn't work / Bugs:
Dolby
Notch Hiding in Settings.
Use MagiskHide 7 Pro (10) module to get certified (Netflix) (This may no longer be needed)
How to Install:
Make sure You're on OOS Open Beta Q or H2OS Q for Android 10 and OB22 for Pie.
Note: Backup Your nudes before flashing the rom!.
Boot TWRP
Flash Open Beta Q OTA.zip
Reboot to fastboot
Run flasher.bat
After it will finish flashing, Your phone will automatically reboot into OOS.
Once You go through SetupWizard You can boot into TWRP (which is built in) and root etc.
If You were on previous build, use dirty flasher.
Check screenshots in attached images!
Download:
OnePlus7 - Open Beta 12 V3 for OnePlus6 - Apr23
Old Pie Build (link may stop working)
OnePlus7 Pro for OnePlus 6 9.5.9 July 11
Warning! DO NOT flash OP7 OTA's! They may brick Your phone! If You end up flashing one anyway, just use EDL mode or fastboot to go back to stock firmware.
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join my group!
If You want to motivate me to work more, buy me a coffee!
https://www.paypal.me/protodevnano
Credits:
engstk for his amazing TWRP
fullofhell for firmware
Mauronofrio for 7T firmware
erfanoabdi for vendor patcher idea.
FunkWizard/OnePlus for latest firmwares!
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
XDA:DevDB Information
[ROM][PORT][9.0.0] OnePlus 6T Port for OnePlus 6 [06.11.18], ROM for the OnePlus 6
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845
ROM OS Version: 10.x
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS Open Beta Q or newer firmware
Based On: OOS
Version Information
Status: Stable
Created 2018-11-06
Last Updated 2018-11-06
Thank you for your work. Could you sum up what features do we get from this?
Also, do you think eventually you'll make a simple to flash in twrp to make it easier to install?
Tomatot- said:
Thank you for your work. Could you sum up what features do we get from this?
Also, do you think eventually you'll make a simple to flash in twrp to make it easier to install?
Click to expand...
Click to collapse
+1
Tomatot- said:
Thank you for your work. Could you sum up what features do we get from this?
Also, do you think eventually you'll make a simple to flash in twrp to make it easier to install?
Click to expand...
Click to collapse
New AOD, Live Wallpapers, New Dialer, New Messages App, some of the stuff that You can see in screenshots (OnePlus Laboratory etc). One more year of firmware updates (6T was launched with Pie).
And all features that OP6T will get in future updates that OP6 might not get.
And if You want, You can install it with TWRP. Just use flash image instead of flash zip. And then flash system.img to system, boot.img to boot and OP6T Vendor Patcher and that's it!
Edit: here's a video https://youtu.be/7pxkqAYylWE. You can skip flashing op6t vendor patcher and vbmeta. Those steps are most likely optional because it's OxygenOS.
Thanks developer .You are unique and thanks for trying new stuffs on OP6 . Waiting for MIUI 10 stable plzzzz work on it .
People don't flash this it's not working!!!
Can confirm the same. Wiped data through TWRP, but it said No OS installed. Also tried through fastboot, but it gave back an "Invalid size/header" error.
ProtoDeVNan0 said:
One more year of firmware updates (6T was launched with Pie).
Click to expand...
Click to collapse
1+ updates their smartphones equally
ProtoDeVNan0 said:
And all features that OP6T will get in future updates that OP6 might not get.
Click to expand...
Click to collapse
Via ota?
Not working..stuck in bootloader screen
biku123 said:
Not working..stuck in bootloader screen
Click to expand...
Click to collapse
You're in pie estable or beta before flash this rom?
Toni Moon said:
You're in pie estable or beta before flash this rom?
Click to expand...
Click to collapse
I am on stable 0S 9.02
Toni Moon said:
You're in pie estable or beta before flash this rom?
Click to expand...
Click to collapse
Pie stable
Sent from my [device_name] using XDA-Developers Legacy app
Thanks developer .
Downloading....
anasmhds said:
Thanks developer
Downloading....
Click to expand...
Click to collapse
doesnt work.
---------- Post added at 11:58 AM ---------- Previous post was at 11:53 AM ----------
I am on oos 9.02 i have downloaded the port. Then i flash TWRP to check the current slot. After that i flash system img using fastboot command .After flashing system img Phone become unresponsive so i again booted to boot-loader and flash vbmeta.img and boot.img then i again flash twrp and flash vendor patch .After reboot either phone goes to crashdump or stay on bootloader unlock warning screen??? any suggestiom
I have seen that its quite hard to install this ROM, the same kind of issues was also in pixel 3xl port, can't we get some simplified installation method just like other custom roms????
Will this erase all data in memory?
manudhomra said:
I have seen that its quite hard to install this ROM, the same kind of issues was also in pixel 3xl port, can't we get some simplified installation method just like other custom roms????
Click to expand...
Click to collapse
ya bro i have flashed more than five times.My wholeday wasted on this rom
some experience from myself.
1: Back up your application and data through Ti Backup
2: download the stock fast boot ROM of OOS
3: boot into bootloader and flash the stock OOS
4: when you done it, just get your ass back in the bootloader and flash the 6t's system IMG into SLOT A!
and the last thing just following the instructions.
One little problem is the system interface does not occupy the entire screen
Raymond.William said:
some experience from myself.
1: Back up your application and data through Ti Backup
2: download the stock fast boot ROM of OOS
3: boot into bootloader and flash the stock OOS
4: when you done it, just get your ass back in the bootloader and flash the 6t's system IMG into SLOT A!
and the last thing just following the instructions.
One little problem is the system interface does not occupy the entire screen
Click to expand...
Click to collapse
Only on Slot A?
And are we supposed to flash it only the system img and not other ones?
AndroidSword said:
Only on Slot A?
And are we supposed to flash it only the system img and not other ones?
Click to expand...
Click to collapse
and follow the thread creator's instruction. such as flash vbmeta etc
---------- Post added at 05:28 PM ---------- Previous post was at 05:23 PM ----------
AndroidSword said:
Only on Slot A?
And are we supposed to flash it only the system img and not other ones?
Click to expand...
Click to collapse
Sorry I misunderstood that you asked me next step how to do. Cause you flash the stock OOS ROM. So it should be in slot A
MIUI 11.2 20.3.12 for OnePlus 6T!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Another ROM made by Jay's Dev Team! Huge Thanks to @MounirHero for maintaining it! No more abandoned support, more frequent updates and tested builds! :victory:
This thread will be mostly updated by [B @MounirHero (Matrix).[/B]
Features:
•March security Patch.
•Automated Flasher.
•Stock Mi Mi 9 MIUI 11.2 20.3.36 Android 10 Debloated
•GAPPS included.
•Google Assistant
•GCam Support!
•TWRP 3.3.1-32 Prebuilt!
What Works
•Encryption
•Face Unlock
•Audio
•Wifi, Bluetooth, RiL
•Auto rotation
•Global Dark Mode!
•Notch Hiding!
•FullScreen Gestures
•MIUI Always On Display
•Themes, Live Wallpapers, Ringtones etc.
•Mi Account
•Mi AI
And more!
What doesn't work / Bugs:
- Reading mode/night light (use custom kernel)
- OnePlus FOD, alert slider)
- System wallpapers picker force closes
How to Install:
Make sure you're on H2OS Q or OOS Q with unlocked bootloader.
Notes: Backup Your nudes before flashing the rom! Use the Dirty Flasher at your own risk.
On Phone
0. Flash OOS 10/H2OS 10/DP3 Q (any stock Q ROM)
1. Reboot to fastboot
2. Unlock bootloader
3. Boot Device
4. Reboot to fastboot
5. Connect phone to PC.
On PC
0. Unpack Mi 9 MIUI 11 20.3.12 OnePlus6T zip
1. Double Click Clean Flasher bat (it could take 5-10 minutes to flash)
2. Phone will boot automatically in Xiaomi Mi 9 Firmware.
3 .Enjoy! After setup reboot to recovery and install MAGISK (inside Addon folder) if you want.
Warning! DO NOT flash MIUI OTA's! They may brick Your phone! If You end up flashing one anyway, just use EDL mode or fastboot to go back to stock firmware.
Download
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join our group!
Jay's Dev Team:
Jay - Main Developer - Donate to Jay
MounirHero - OnePlus 6T Maintainer & Tester - Donate to Mounir
Credits:
MounirHero for maintaining and testing
ProtoDeVNan0 for base OP6 Port
erfanoabdi for vendor patcher idea.
FunkWizard/OnePlus for latest firmwares!
OnePlus for creating OP6/6T!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
XDA:DevDB Information
[ROM][PORT][10.0.0]Xiaomi Mi 9 MIUI 11.2_20.3.26[02.04.2020], ROM for the OnePlus 6T
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS DP3
Based On: MIUI
Version Information
Status: Stable
Created 2019-09-25
Last Updated 2020-05-24
Reserved
Reserved
Thanks everyone for support! We're very proud!
we're sorry about the same bugs as in previous build.
But we don't have official open beta Q yet as base.
EPR GUIDE
-select storage '64' '128' '256'
-type 'system'
-Type 'a'
EPR OP6/6T
Some screenshots attached ?️
What's EPR? A little more about the complete installation procedure and if possible adding links would be very useful
Hello there, firstly thanks dev and testers for your time and effort for developing this new rom, second of all... excuse my ignorance but what's EPR? One of installation requirements.Thanks and have a great day.
oscarmaldonado said:
Hello there, firstly thanks dev and testers for your time and effort for developing this new rom, second of all... excuse my ignorance but what's EPR? One of installation requirements.Thanks and have a great day.
Click to expand...
Click to collapse
Enchilada partition resizer EPR-----https://forum.xda-developers.com/oneplus-6/how-to/tool-epr-enchilada-partition-resizer-t3963587
Yeaaaaaaaaaaah buddy!
Just to verify, EPR is actually needed for this, correct? I know it's stated, just making sure it wasn't just a copy/paste instructions error.
SREEPRAJAY said:
What's EPR? A little more about the complete installation procedure and if possible adding links would be very useful
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/how-to/tool-epr-enchilada-partition-resizer-t3963587
Just realized something. This is DP3 based. Can someone on VZW try this out? Got mad System UI crashes that appeared to be related to VZWs network on DP3.
Anyone know if this would work with the T-Mobile version that has been running international version of oos?
ProtoDeVNan0 said:
MIUI 11 9.9.24 for OnePlus 6T!
How to Install:
Make sure You're on DP3
Note: Backup Your nudes before flashing the rom!.
This ROM requires EPR! Pay attention to slots!
Use EPR
Boot TWRP
Flash DP3 OTA.zip
Reboot to fastboot
Run flasher.bat
Once You boot fully, You can boot into TWRP (which is built in) and root etc.
Click to expand...
Click to collapse
I'm just curious, after official OOS 10 OTA is released will all ROMs such as this be re-based and the whole DP3 and EPR thing will be obsolete?
Causical said:
I'm just curious, after official OOS 10 OTA is released will all ROMs such as this be re-based and the whole DP3 and EPR thing will be obsolete?
Click to expand...
Click to collapse
MIUI 11 Port has a bigger system image than OP6/6T 's actual system partition and is difficult to debloat.
So for now is needed.
DP3 base will be switched with OB and most bugs will probably get fixed.
cultofluna said:
https://forum.xda-developers.com/oneplus-6/how-to/tool-epr-enchilada-partition-resizer-t3963587
Click to expand...
Click to collapse
Tried every possible trick, getting stuck at bootloader. Not able to boot into recovery after ERP
Suhas_JS said:
Tried every possible trick, getting stuck at bootloader. Not able to boot into recovery after ERP
Click to expand...
Click to collapse
Having the same issue, says "load error" when trying to boot twrp
Suhas_JS said:
Tried every possible trick, getting stuck at bootloader. Not able to boot into recovery after ERP
Click to expand...
Click to collapse
Updated guide now everything should be fine.:good:
Hi, i follow your Guide, but after flash stucks on Oneplus Logo :/
thanks for this one.... it so cool?
sakarya1980 said:
Hi, i follow your Guide, but after flash stucks on Oneplus Logo :/
Click to expand...
Click to collapse
Try again, use msm, unlock bootloader and re do everything
Boot TWRP
Flash DP3 OTA.zip
Flash twrp installer zip
Reboot recovery
Again
Flash DP3 OTA.zip
Flash twrp installer zip
Reboot recovery
Use EPR
Once in fastboot
Run flasher.bat
sakarya1980 said:
Hi, i follow your Guide, but after flash stucks on Oneplus Logo :/
Click to expand...
Click to collapse
As said EPR is not working in 6t after selecting the size and slot the cmd closes itself and device is not restarting itself into fastboot as said. I think EPR is not working on 6t bcoz Dev doesn't own a 6t device. Check ur screen shot u find error last flash failed volume full that's the problem EPR in 6t not working.