Issues with TWRP and Stock Recovery and sideloading - OnePlus 3T Questions & Answers

Had a bad flash last night and am struggling to get anything back on the phone.
Got TWRP back on but have no functionality - the touchscreen wont work, I've tried various versions and are all the same,
I installed the stock recovery, did a full wipe and tried to sideload various roms - stock and custom, the update gets half way and stops saying installation failed.
I've done this before and am pretty sure the drivers are ok...
Might be something simple....I give in tonight though....any help would be greatly appreciated

I would recommend you to try the unbrick recovery option using the Qualcomm tool.
http://bfy.tw/CoKX

pitrus- said:
I would recommend you to try the unbrick recovery option using the Qualcomm tool.
http://bfy.tw/CoKX
Click to expand...
Click to collapse
I did look at this last night but didn't think my issue was as bad a brick issue....but...I tried it this morning and all is good...
Thank you for pointing me in the right direction?

Related

[Q] [i9000] cyanobricked

Hi there,
I noticed I can't get in download mode anymore. Whatever I try it won't show the yellow triangular download sign. It just boots into cyanogen.
I have tried the 3 button trick but recovery nor download works. That's when I had the idea to apply the 3-button fix. adb reboot recovery brings me in the cwm recovery mode. adb reboot download just reboots the phone. I even tried the 300k ohm jig which always seemed to work as a failsafe. That also just boots the phone into cm.
I have checked with my brother who also runs CM nightly 101 and for him the download mode works fine so it is my phone, not CM.
The phone works fine now, is rooted too so I wondered if there's any way to fix this by rewriting the bootloaders. I want to have this fixed as a failsafe is flashing ever fails or if one of the nightlies gets corrupted.
Is there anyone who can confirm the download mode is in the primary bootloader (boot.bin from a stock rom) and is it safe to just flash_image that to the boot partition or will that be a guarantee to brick. The idea is that I still have root console access so I have to fix it from there.
Any help is appreciated.
Christiaan
Galaxy S
CyanogenMod 7 Nightly #101
Their is a chance that whenever u tried to go into download mode your phone was connected into charging and phone doesn't go into download mode when charging , please reply and tell Me that did I helped!
Sent from my GT-I9000 using XDA Premium App
BHuvan goyal said:
Their is a chance that whenever u tried to go into download mode your phone was connected into charging and phone doesn't go into download mode when charging , please reply and tell Me that did I helped!
Click to expand...
Click to collapse
Thanks for the quick reply.
Tried the tricks with and without pc-usb/charger and it made no difference. The 300k ohm jig trick can't be done with power or computer connected since you have to use the usb connection on the phone for it. It usually was my ever working failsafe.
I also tried the quickboot app without any luck. It seems it is responding to the download command but the code isn't there anymore.
Hey try going into download mode by touch controls although I haven't ever used cyanogen but i assume as every custom rom has this feature cyanogen must also have this! The download mode option in quick network options when u press the power button for 2 seconds ! Although it isn't safe but you cab try this and then if it goes into download mode then their must a way to go into download mode manually!
Sent from my GT-I9000 using XDA Premium App
BHuvan goyal said:
Hey try going into download mode by touch controls although I haven't ever used cyanogen but i assume as every custom rom has this feature cyanogen must also have this! The download mode option in quick network options when u press the power button for 2 seconds ! Although it isn't safe but you cab try this and then if it goes into download mode then their must a way to go into download mode manually!
Click to expand...
Click to collapse
Holding the power button for two seconds indeed brings up the profile/reboot/shutdown options. Selecting reboot only gives two additional options, reboot and recovery which do as they say. I can boot cwm recovery but from there I can't go into download mode either.
Try downloading terminal emulator and then reboot download or ADB reboot download
Nitro_123 said:
Try downloading terminal emulator and then reboot download or ADB reboot download
Click to expand...
Click to collapse
Tried it from the terminal with reboot download. Also tried adb reboot download long before that. It just reboots and starts. I have the feeling the piece of bootblock that's holding the download mode isn't there anymore.
There is an option in recovery to boot into download mode, Have you tried that ?
It sounds to me like that part of the bootloader is corrupt / missing.
Does the phone still work normally ? can you still continue to use it daily without the download mode option ?
azzledazzle said:
There is an option in recovery to boot into download mode, Have you tried that ?
It sounds to me like that part of the bootloader is corrupt / missing.
Does the phone still work normally ? can you still continue to use it daily without the download mode option ?
Click to expand...
Click to collapse
The phone works fine otherwise. I just want to fix this before it stops working fine and I need the download mode.
Recovery boots into CWM-based Recovery v4.0.1.5 which I got with CM7 with no option to return to the stock recovery or download mode as far as I can see. Also zipped updates from sd-card install fine from CWM recovery mode. If I just knew where to find a cwm ready zipped bootloader that will fix this.
cvdveer said:
The phone works fine otherwise. I just want to fix this before it stops working fine and I need the download mode.
Recovery boots into CWM-based Recovery v4.0.1.5 which I got with CM7 with no option to return to the stock recovery or download mode as far as I can see. Also zipped updates from sd-card install fine from CWM recovery mode. If I just knew where to find a cwm ready zipped bootloader that will fix this.
Click to expand...
Click to collapse
Thats a good idea, I think that should be made, Would save a lot of hassle...
In my recovery under 'advanced features' the option is there to reboot into android or reboot into download..
In order to go from CM7 - Stock, do you need re-partition with all 3 files ? or can you flash it through recovery ?
If so, flash it to stock and sell it to someone who has no idea about Custom ROMs / Hacking. (like me 12 months ago )
EDIT: is this issue not kernel related by any chance ?
azzledazzle said:
Thats a good idea, I think that should be made, Would save a lot of hassle...
In my recovery under 'advanced features' the option is there to reboot into android or reboot into download..
In order to go from CM7 - Stock, do you need re-partition with all 3 files ? or can you flash it through recovery ?
If so, flash it to stock and sell it to someone who has no idea about Custom ROMs / Hacking. (like me 12 months ago )
EDIT: is this issue not kernel related by any chance ?
Click to expand...
Click to collapse
Well I have no clue to make any package and I don't dare to flash_image some random boot.bin.
My recovery -> advanced only has reboot recovery which brings it back into recovery.
I'm afraid bringing it back to stock also needs odin/heimdall, that brings me back to the initial problem.
Selling it gives me the money for half a new phone. As long as its working fine I'd like to stick with it. My worst case scenario so far is that I'm stuck with CM7 nightly #101 for the coming 1.5 year which is annoying but far better than the slow stock samsung hands out.
The issue can't be directly kernel or CM7 related. My brother has CM7 #101 running and download mode works fine with him. (And no I can't secretly swap phones ) He doesn't know how to work with odin so I arranged everything for him. Exactly the same steps as I did my own phone. Perhaps a glitch in flashing or something.
cvdveer said:
Well I have no clue to make any package and I don't dare to flash_image some random boot.bin.
My recovery -> advanced only has reboot recovery which brings it back into recovery.
I'm afraid bringing it back to stock also needs odin/heimdall, that brings me back to the initial problem.
Selling it gives me the money for half a new phone. As long as its working fine I'd like to stick with it. My worst case scenario so far is that I'm stuck with CM7 nightly #101 for the coming 1.5 year which is annoying but far better than the slow stock samsung hands out.
The issue can't be directly kernel or CM7 related. My brother has CM7 #101 running and download mode works fine with him. (And no I can't secretly swap phones ) He doesn't know how to work with odin so I arranged everything for him. Exactly the same steps as I did my own phone. Perhaps a glitch in flashing or something.
Click to expand...
Click to collapse
Hmmm... tricky one to fix..
I have no more ideas i think flashing bootloaders through recovery would work like you said, But unless its a tried and tested method i wouldnt recommend it at all.
Have you posted this issue in the CM thread ? perhaps you could PM one of the Devs for assistance, or whether the whole 'flashing bootloader in recovery' idea would work at all.
You have nothing to lose by asking them.
Hope you get a solution... But until them im out of ideas.
Keep us updated if you get a fix.
Good luck man !!
EDIT: one more idea, Sounds risky but.... What if you made a nandroid backup on your brothers phone and restore it on yours ?? Thats if nandroid does back up bootloaders im not sure
azzledazzle said:
Hmmm... tricky one to fix..
I have no more ideas i think flashing bootloaders through recovery would work like you said, But unless its a tried and tested method i wouldnt recommend it at all.
Have you posted this issue in the CM thread ? perhaps you could PM one of the Devs for assistance, or whether the whole 'flashing bootloader in recovery' idea would work at all.
You have nothing to lose by asking them.
Hope you get a solution... But until them im out of ideas.
Keep us updated if you get a fix.
Good luck man !!
EDIT: one more idea, Sounds risky but.... What if you made a nandroid backup on your brothers phone and restore it on yours ?? Thats if nandroid does back up bootloaders im not sure
Click to expand...
Click to collapse
Thanks for thinking with me. I'll give the nandroid solution a go if there are no other replies within a reasonable time.
I'll post the same question in the CM forum but contacting the CM devs could be hard. They don't give any official support to nightlies and I can't say I'm convinced it has anything to do with CM at all. Though they do have the knowledge to answer the question or build a package to repair it. But you're right there's nothing to lose in asking.
Ofcourse I searched the forum before posting and found out I seem to be the only one ever with this problem. The solution could be as rare so I'll keep you posted if I make any progress beside here. That's what the whole idea behind this forum is for right?
True man !!
And if you get a solution or a dev to make a flashable bootloader. It could help other people in future
Good luck. Keep us posted
http://forum.xda-developers.com/showthread.php?t=1236273
Nitro_123 said:
http://forum.xda-developers.com/showthread.php?t=1236273
Click to expand...
Click to collapse
Interesting but that project still needs a bricked i9000 to tear apart. I don't have a captivate. Well if it ever becomes really bricked I'll consider donating mine.
And I'm okay with handling computers (yes I consider the phone a small computer about 400 times faster than my first pc) but when actual soldering is involved I give up.
fixable?
i have a samsung here the S GT I 9000 and i tryed to use odin on it and now this pops up every time i try to up load an os
--installing package...
finding package...
opening package...
verifying update package...
installing update...
successfully install update...
--copy media files...
successfully copied media files..
formatting /data...
E:format_volume: rfs format failed on / dev/block/mmcblk0p2
formatting /dbdata...
formatting /cache..
deleting meta data
data wipe fail.
-- appling multi-csc...
installing multi-csc..
cant access to '/system/csc/bmc/system/' . sucessfully applied multi-CSC
Help!
Hi! If it still doesn't work, try downloading ROM Manager from the market and install the latest CWM. It sounds like your bootloader got modified/locked.
Erahgon said:
Hi! If it still doesn't work, try downloading ROM Manager from the market and install the latest CWM. It sounds like your bootloader got modified/locked.
Click to expand...
Click to collapse
Errr talking to me or adonai? Sounds like two seperate problems for two seperate topics.
cvdveer said:
Interesting but that project still needs a bricked i9000 to tear apart. I don't have a captivate. Well if it ever becomes really bricked I'll consider donating mine.
And I'm okay with handling computers (yes I consider the phone a small computer about 400 times faster than my first pc) but when actual soldering is involved I give up.
Click to expand...
Click to collapse
I REALLY liked your answer
BTW , same here

I9305 is it bricked?

Hi Guys.
Got an I9305 here, I rooted it (apparently fine), then (via recovery) flashed a cusom ROM, rebooted but it stayed on the I9305 screen. Now I can't get to recovery, it will go to download but I can detect it via heimdall, and it still wont boot. Have I killed it or is there anything I can do to resurect it? I've been searching the forums here for ages, but I'm just going in circles with getting any closer to a solution.
Ideas?
-S
If you can get download mode then try flashing a stock ROM via Odin.
You're still in luck when you have download mode, when you don't have that or recovery then you start worrying.
PS: don't forget you have a I9305 when searching for a stock ROM.
Sent from my GT-I9305 using Tapatalk 2
aussiesausage said:
If you can get download mode then try flashing a stock ROM via Odin.
You're still in luck when you have download mode, when you don't have that or recovery then you start worrying.
PS: don't forget you have a I9305 when searching for a stock ROM.
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
I can get to download (the only place I can get), but neither Odin or Heimdall will connect to it, they both just sit there as if the phone isn't plugged in.
-S
Then you don't have the correct drivers installed
Have you used Odin/Heimdall before?
Rekoil said:
Then you don't have the correct drivers installed
Have you used Odin/Heimdall before?
Click to expand...
Click to collapse
OK got it connect now, I've used Heimdall several times on my I9300 without problem so I think it's a hardware problem. I flashed a new recovery and can now get to that when needed but it still wont let me boot any ROMs I flash, it just hangs at the I9305 screen. Is there anyway I can reset the custom binary count from Heimdall/Odin or recovery so I can send it back to get replaced/fixed?
Try this before doing anything drastic, It's stock but rooted but do it through Odin.
http://forum.xda-developers.com/showthread.php?t=1942150
Raistlin1158 said:
Try this before doing anything drastic, It's stock but rooted but do it through Odin.
http://forum.xda-developers.com/showthread.php?t=1942150
Click to expand...
Click to collapse
No joy, looked like it worked, but stuck on the I9305 screen again ;^<
Sanukk said:
No joy, looked like it worked, but stuck on the I9305 screen again ;^<
Click to expand...
Click to collapse
These roms you've been flashing, do they contain a kernel? Hanging on boot screen can be indicative of a couple of things, firstly, if you have the wrong kernel, fix that. Secondly, try clearing data and cache, this can work wonders. Thirdly, if ADB is currently enabled, try bringing up a shell through it ("adb shell", note: not in recovery obviously, as this mode is already working fine) and type "dmesg", this will print out what the kernel is currently doing, usually if something is erroring you will see the same text re-appear multiple times. If the kernel initiation gets stuck in a loop it will literally never get out of it so that would be a good way to see that, could be a piece of hardware is damaged. Since you can get to recovery I reckon you should be able to mount system/data in that and enable ADB in android if it isn't already, I don't know how to do this though.
Good luck!
Something that's helped me before in this situation was:
Go to mounts and storage in recovery and format System, Data and Internal storage.
Then download stock firmware and Flash via Odin.
This pretty much wipes your phone of everything and gives you a fresh install
You have to wipe data after flashing a ROM
Hi Guys,
I tried flashing a stock ROM via Heimdall again, and this time it worked. The phone is still very flacky though, so I'm convinced it's a hardware issue. Managed to triangle away and get everything stock, so they should never know when I send it back for replacement ;^>
Thanks to all for your suggestions.
-S

[Q] I think some help is needed in urgency and wisdom

Hi everyone
After a lot of reading i decided to install a ROM. Now i was able to try to but none of them worked, so i ve been trying now for 3 days. I think i did it all as stated in this forums, it launched but never go to really open the OS, used to get stuck at the motorola or nexus logos or what ever logo from the different ROMs i downloaded.
I was able to go back to the original ROM but today im not being able to do so...
What can i do? Im at recovery and im able to restore boot but at system it says:Error while restoring /system!
I had it backedup at pc so i have also removed the one at sd card and tried with the one from PC.
What can i do (that doesnt involve getting another phone)
You can try RSDLite to flash back stock ROM just be careful and flash right ROM, otherwise you can brick your phone. You can't flash custom ROMs with RSD.
mm166 said:
You can try RSDLite to flash back stock ROM just be careful and flash right ROM, otherwise you can brick your phone. You can't flash custom ROMs with RSD.
Click to expand...
Click to collapse
Attempting in 3..2..1..................
It doesnt let me use decompress and flash... im decompressing and will see if there is an option to flash after that...
Ok my issue is that phone is not recognized by the RSD... i know update the drivers bla blaaa... how if its not recognized and the MDM needs the phone connected to be updated and in my country i know noone else with a damn Motorola phone... ideas ?
MrPersonality said:
Ok my issue is that phone is not recognized by the RSD... i know update the drivers bla blaaa... how if its not recognized and the MDM needs the phone connected to be updated and in my country i know noone else with a damn Motorola phone... ideas ?
Click to expand...
Click to collapse
Boot the phone into bootloader/fastboot?
You have an unlocked bootloader and custom recovery installed? I assume you have both since you were trying to install custom ROMs.
I have tried to the fastboot... im trying AP fastboot and theres where i am stuck right now.
Yes custome recovery and unlocked bootloader there. I had the phone moved to another couple of roms but the never loaded correctly so i went back to my original ROM, i tried a few other ROMs and none worked so this time i try to go back but it doesnt come back anymore... :laugh:
Try downloading PhilzAdvanced CWM Recovery. It is based off the latest CWM and should be able to flash your backups or ROMS. Maybe not your backups unless you made them with a CWM based recovery, but it should get you booted up.
kingatmos said:
Try downloading PhilzAdvanced CWM Recovery. It is based off the latest CWM and should be able to flash your backups or ROMS. Maybe not your backups unless you made them with a CWM based recovery, but it should get you booted up.
Click to expand...
Click to collapse
Is it possible to do that? I mean right now my phone only boots to fastboot you know... i may flash a rom (which didnt work with any from this forum neither with CM) but i cant install anything in my phone so... how can i do that?
MrPersonality said:
Is it possible to do that? I mean right now my phone only boots to fastboot you know... i may flash a rom (which didnt work with any from this forum neither with CM) but i cant install anything in my phone so... how can i do that?
Click to expand...
Click to collapse
1. Read the Myth Tools OP
2. Download Myth Tools
3. Download Philz CWM
4. Download a stock fastboot
5. Place the fastboot zip and the extracted recovery/cwm.img in their respected folders
6. Run Myth's executable and follow the instructions
7. If that doesn't work then read the faqs here and in the RAZR HD forums, all your questions have been answered already.
Still with same issue...
Phone is not recognized by the computer (tried 3 different laptops)
Cannot download the Drivers as its an automated process that begins when you connect the phone...
Does anyone knows an alternative to install AHD drivers ?
MrPersonality said:
Still with same issue...
Phone is not recognized by the computer (tried 3 different laptops)
Cannot download the Drivers as its an automated process that begins when you connect the phone...
Does anyone knows an alternative to install AHD drivers ?
Click to expand...
Click to collapse
Did you not see the mythtools menu option for drivers?
Sent from my MB886 using xda app-developers app
palmbeach05 said:
Did you not see the mythtools menu option for drivers?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Again, my main issue device not detected by pc... so i cant download drivers using automatic tools that detects the phone because again phone is not detected and mythtools goes straight to the motorola device manager which needs a phone connected to act... so in a very bad circle i am... and i would try to use someone else phone but here in Costa Rica i know of noone else with a Motorola phone... everyone thinks it no longer exists... and i havent found a way to download the specific drivers for my specific device in a way it doesnt require to be connected.
You can boot into recovery? If so download the latest philztouch cwm recovery, put it on your sd card, and flash it from recovery. Then flash the ROM you want.
Sent from my MB886 using Tapatalk
kingatmos said:
You can boot into recovery? If so download the latest philztouch cwm recovery, put it on your sd card, and flash it from recovery. Then flash the ROM you want.
Sent from my MB886 using Tapatalk
Click to expand...
Click to collapse
Nice i managed to flash the philztouch recovery... the damn phone doesn't want to accept any ROM... keeps aborting them. So far thanks a lot... ill read like crazy today again and ill ask for help if failure salutes me again!
:highfive:
If you made a backup of your stock after rooting try flashing that and then hooking your phone up to your pc
Sent from my MB886 using Tapatalk
It finally works
It works... i think somehow the recovery stopped working at some point... now with Philz phone was recognized by pc and i was able to use Myth tools to do the job. I think this will be my last Motorola...
Things to highlight:
1 i did read a lot before doing anything, still somehow screwed up, did read lots before asking here, still needed to ask... got answers, still needed to ask more... it was fun as everyone at work said: " its bricked fool buy a new one and stop playing to be good at something" but hell yeah its fixed!
2 i will try again to install another rom, i wont give up damn it!
3 i might begin with my wife Note 1, its old so its ok to brick it ha ha ha
4 damn it guys you are cool... wish i were 10% of you guys!
5 I think instead of all those different options out there we should recommend only to use the myth tools, its a complete package and its easy to use even with examples for newbies like me.
Again thanks and questions on friday after i brick it again e he he he...
The other stuff is there so you can understand what the automated stuff is actually doing.
Sent from my MB886 using Tapatalk
Ok so i have started the process again. I cant tell what i am doing wrong. I have flashed 2 different roms and none worked... its like im missing something.
I root the device, unlock bootloader... set the recovery with cwm... flash the rom... and it goes to moto logo and then black screen... am i missing something?
I did the exact same for the stock rom and it did work... also i did it all exactly the same using now myth tools... so any ideas? Should i leave the phone alone because its just simply not going to work or am i missing anything?

[Q] Can I send a rooted phone in to LG for repair?

OTA bricked phone, still booting to Cyanogen, can't restore from nandroid, just boots back into CWM...if I send that in to LG as a last ditch effort, is it covered?
JoeProcopio said:
OTA bricked phone, still booting to Cyanogen, can't restore from nandroid, just boots back into CWM...if I send that in to LG as a last ditch effort, is it covered?
Click to expand...
Click to collapse
Can you get into Download mode?
http://forum.xda-developers.com/showthread.php?t=2448960
Hey Matt, no download mode...only CWM...when I try to restore a backup, it goes through the restore and then boots back into CWM. I've tried everything I can that I have found on here...even the ubuntu way, but I can't even see the device with ubuntu...something about qualcom drivers that I can't install.
the LG Flash tool requires download, I've been through that process before. I was hoping that since I can still get into CWM, i would still be good, but alas, NOTHING WORKS, lol.
JoeProcopio said:
Hey Matt, no download mode...only CWM...when I try to restore a backup, it goes through the restore and then boots back into CWM. I've tried everything I can that I have found on here...even the ubuntu way, but I can't even see the device with ubuntu...something about qualcom drivers that I can't install.
the LG Flash tool requires download, I've been through that process before. I was hoping that since I can still get into CWM, i would still be good, but alas, NOTHING WORKS, lol.
Click to expand...
Click to collapse
Are you using the LG cable that came with the phone for your download mode attempt? I thought I read others have issues when not using it. If you are, sorry, no other ideas here.
mjones73 said:
Are you using the LG cable that came with the phone for your download mode attempt? I thought I read others have issues when not using it. If you are, sorry, no other ideas here.
Click to expand...
Click to collapse
yes, the LG cable that came with the phone
i can get into sideload mode, but can't send any other rom to the phone, only CM roms start to load, but then nothing...everything else says cannot read sideload
ADB push isn't working right either, maybe I'm doing something wrong with the command, but i've done it before on other phones...maybe LG is weird

bricked....

Hi so I was trying to use CF to root my phone and ended up screwing it somehow and bricked. I thought I'd followed the instructions well enough but I obviously did something wrong. Now my phone is stuck saying it needs to recover with Kies. This is my first Samsung phone but I'm not new to Android.
I tried installing the stock firmware through ODIN but everytime I flash it gets to installing the system ext4 and fails. I also wasn't able to recover using Kies(not even sure how you use it tbh).
If anyone could help me it would be mucho appreciated. I'm pretty pissed at myself right now.
re: not bricked
cronos1388 said:
Hi so I was trying to use CF to root my phone and ended up screwing it somehow and bricked. I thought I'd followed the instructions well enough but I obviously did something wrong. Now my phone is stuck saying it needs to recover with Kies. This is my first Samsung phone but I'm not new to Android.
I tried installing the stock firmware through ODIN but everytime I flash it gets to installing the system ext4 and fails. I also wasn't able to recover using Kies(not even sure how you use it tbh).
If anyone could help me it would be mucho appreciated. I'm pretty pissed at myself right now.
Click to expand...
Click to collapse
Your phone is NOT bricked. If it was the screen would not even go on.
Have you tried going into recovery mode (VolumeUP/VolDown/PowerButton)
and once in Recovery Mode do a factory reset or Data Reset forgot what the
exact wording is in the stock recovery.
If you flashed twrp recovery it's ok too, just select "factory reset".
After doing that the phone should no longer display anything about Kies.
If you get to the twrp recovery screen you should be able to flash a stock
rooted rom without any issues.
If all you get is the stock recovery screen then you should be able to odin
flash the official Samsung Note 4 kitkat 4.4.4 NJ7 firmware which you may
need to download the firmware from http://SamMobile.com if you don't
already have it. (be sure you have the correct firmware for the Note 4 N910T).
Be 100% sure that the phone is FULLY POWERED DOWN before going
into Download Mode to avoid odin errors and issues.
Good luck!
Thanks man. I had tried Odin at my office and nothing doing.
Got home took my time and was real calm about things and voila. May have been an md5 issue with the firmware file. Just relieved I didn't have to RMA it.
cronos1388 said:
Thanks man. I had tried Odin at my office and nothing doing.
Got home took my time and was real calm about things and voila. May have been an md5 issue with the firmware file. Just relieved I didn't have to RMA it.
Click to expand...
Click to collapse
Can you check for the file with md5 before you flash from your phone? I forgot where to dig for this info.
All I I have done before is on my cook rom file, I just open it with WinRAR and test for error. If no error, then its good.
On my Home PC I have a program that will put a check mark next to a file if it matches the md5. I also have Winrar at home.
I was just using the default Windows zip program and I have had problems with that and installers/roms in the past.
The only other things I did different were I removed the SD card and installed the drivers before plugging my phone in instead of letting Windows download them automatically.
I also removed the battery after I left work so it was out of the phone for a couple of hours.
The final thing I did was calm down lol after the initial shock of seeing a softbricked screen on my brand new phone.
I'm all rooted now with TWRP and running Hyperdrive so it's all smooth sailing from this point forward.
You should check md5 on phone once you done transferred to phone from PC
BAD ASS NOTE 4

Categories

Resources