Hi everyone,
I would be so thankful if anyone of you can guide me as to unbrick Le 2 when USB debugging is off and boot loader also is locked. Is there anyway or m i screwed? I only have stock recovery screen and that too is in Chinese and when i tried changing language it gets turned off. Please tell me how to push stock recovery and ROM back in to it. Fastboot command is not working proving the fact that usb debugging is off.
Thanks
Can't you boot to fastboot with Volume- and Power?
Works for me even when ADB is disabled in phone.
JamBax said:
Can't you boot to fastboot with Volume- and Power?
Works for me even when ADB is disabled in phone.
Click to expand...
Click to collapse
I tried with volume down + power keys but it did not respond at all.
nadeem_naddy said:
I tried with volume down + power keys but it did not respond at all.
Click to expand...
Click to collapse
Strange!
Did you try to press a little bit longer?
Have you seen this: https://forum.xda-developers.com/le-2/development/tools-unbrick-thread-leeco-le-2-x52x-t3634609
only way to unbrick is to flash a QTI image (only one I found is an indian version) with a Qualcomm tool . There are some tutorial here and Youtube . This is a laborious way but not hard to do it yourself . I just done it myself , there were some small problems but I succeded .
muppetz said:
only way to unbrick is to flash a QTI image (only one I found is an indian version) with a Qualcomm tool . There are some tutorial here and Youtube . This is a laborious way but not hard to do it yourself . I just done it myself , there were some small problems but I succeded .
Click to expand...
Click to collapse
I tried the tutorial shared above but it gives error saying there is no enough space on device.
nadeem_naddy said:
I tried the tutorial shared above but it gives error saying there is no enough space on device.
Click to expand...
Click to collapse
Using this method you need to download QTI image , then Qualcomm flash tool (FlashOne1.9) . Power off the phone and keep the vol+&vol- pushed together . The LED start to blink when you connect the usb to PC . Start flash and wait for finish ..... That's for short ...
I don't think you tried it like this because screen is off , phone is off everything is dead , it can't be shown anywhere something like you described
muppetz said:
Using this method you need to download QTI image , then Qualcomm flash tool (FlashOne1.9) . Power off the phone and keep the vol+&vol- pushed together . The LED start to blink when you connect the usb to PC . Start flash and wait for finish ..... That's for short ...
I don't think you tried it like this because screen is off , phone is off everything is dead , it can't be shown anywhere something like you described
Click to expand...
Click to collapse
By qti image you mean the same zip file given in the thread itself by the name of sparse rom? I followed the same and used flash2.0 but flash tool gave the error i described.
nadeem_naddy said:
By qti image you mean the same zip file given in the thread itself by the name of sparse rom? I followed the same and used flash2.0 but flash tool gave the error i described.
Click to expand...
Click to collapse
Did you put flash tool in C: ? In flash tool folder you must put also the zip file . Did you disable any antivirus and install Qualcomm drivers (LGMobileDriver_WHQL_Ver_4.0.4) ? You can't be wrong if have done those steps .
muppetz said:
Did you put flash tool in C: ? In flash tool folder you must put also the zip file . Did you disable any antivirus and install Qualcomm drivers (LGMobileDriver_WHQL_Ver_4.0.4) ? You can't be wrong if have done those steps .
Click to expand...
Click to collapse
Ok i will try again the same way you suggested.
nadeem_naddy said:
Ok i will try again the same way you suggested.
Click to expand...
Click to collapse
After led start blinking and the liason between pc and phone has been reached you must select the com port and qualcomm flash in flash tool window . Don't touch anything on PC while flashing . If something goes wrong repeat the steps after disconnect phone and reboot and power off the phone . First time flash tool will unzip the sparse rom and create a new folder inside flash tool so next try you'll flash if is needed you can skip this step .
More than that I must warn you the QTI ROM is quite fine but internal memory is encrypted . Doesn't matter much but for me was a pain in my but . Therefore it must to be done more other steps to make it better . Anyway the phone is back in function and it can be done anything on it like TWRP , installing new fresh ROMs etc
muppetz said:
After led start blinking and the liason between pc and phone has been reached you must select the com port and qualcomm flash in flash tool window . Don't touch anything on PC while flashing . If something goes wrong repeat the steps after disconnect phone and reboot and power off the phone . First time flash tool will unzip the sparse rom and create a new folder inside flash tool so next try you'll flash if is needed you can skip this step .
More than that I must warn you the QTI ROM is quite fine but internal memory is encrypted . Doesn't matter much but for me was a pain in my but . Therefore it must to be done more other steps to make it better . Anyway the phone is back in function and it can be done anything on it like TWRP , installing new fresh ROMs etc
Click to expand...
Click to collapse
Now i did exactly you asked me to do but this time i am getting a different error saying flash file is not there in setup. Fed up of trying a countless times.
Error ss
nadeem_naddy said:
Error ss
Click to expand...
Click to collapse
oh man ....
you didn't choose the right zip !!!
this is a custom ROM you use , I look for more information and I found this , follow it :
video tutorial : https://www.youtube.com/watch?v=MBOqYzEkquc ,
download sparse image Le 2 (S2) : mega:#!tUQG2SCA!CPCYrZdNl0Sj1y0GNnxvLb5iISeHyffyf_WtwjdgS8A
Resume carefully all the steps from the beginning ,
---------- Post added at 07:29 PM ---------- Previous post was at 07:08 PM ----------
nadeem_naddy said:
Error ss
Click to expand...
Click to collapse
For all those who are getting error: "please don't contain blank space in tool path" , for this error make sure you make a new folder in C: inside it must be Flash Tool also inside Flash Tool folder under "HSCTBackup" you put sparse image . You could rename the sparse image with a short name whatever you want like "unbrick or repair or somehow you want" . After complete connection between PC and the phone you may release the buttons vol+/vol- , put the phone on the table and wait for full flashing . Don't panic , be calm you'll succeed !
muppetz said:
oh man ....
you didn't choose the right zip !!!
this is a custom ROM you use , I look for more information and I found this , follow it :
video tutorial :
,
download sparse image Le 2 (S2) : mega:#!tUQG2SCA!CPCYrZdNl0Sj1y0GNnxvLb5iISeHyffyf_WtwjdgS8A
Resume carefully all the steps from the beginning ,
---------- Post added at 07:29 PM ---------- Previous post was at 07:08 PM ----------
For all those who are getting error: "please don't contain blank space in tool path" , for this error make sure you make a new folder in C: inside it must be Flash Tool also inside Flash Tool folder under "HSCTBackup" you put sparse image . You could rename the sparse image with a short name whatever you want like "unbrick or repair or somehow you want" . After complete connection between PC and the phone you may release the buttons vol+/vol- , put the phone on the table and wait for full flashing . Don't panic , be calm you'll succeed !
Click to expand...
Click to collapse
Blank space error i did not get as i always has put it in a path not containing spaces.. and the rom i have tried I downloaded it from the guide itself for x526. well now i ll be trying downloading from your given link. Thanks
Yes m succeeded this time.. thanks a lot
nadeem_naddy said:
Yes m succeeded this time.. thanks a lot
Click to expand...
Click to collapse
ok , good job :good:
nadeem_naddy said:
Yes m succeeded this time.. thanks a lot
Click to expand...
Click to collapse
did you verify TWRP , did it ask for password ?
if yes , you're in a deep problem my friend ... internal memory is encrypted so no new install zip , no wipe anything , no nothing
but of course there are solutions to make it a really good clean phone
muppetz said:
did you verify TWRP , did it ask for password ?
if yes , you're in a deep problem my friend ... internal memory is encrypted so no new install zip , no wipe anything , no nothing
but of course there are solutions to make it a really good clean phone
Click to expand...
Click to collapse
Ohhh, i did not check.. it was a friend's phone and i have returned it to him.
Help me i also have this phone but when i connected to pc same step my phones led is blinking but Qualcomm port doesn't sowing in pc and i tried to install driver but doesn't work thanks in advance.
Related
After installing Vanir, I don't know what went wrong !!! it was freezing then after trying to charge it, it bricked!!!!
I searched the forume and found major two ways
FIRST
RuedasLucas Here :
http://forum.xda-developers.com/showthread.php?t=1932123
i followed the info. correctly and stuck in the same problem the man in the thread have, I am stuck in LG logo
so i tied the second
http://forum.xda-developers.com/showpost.php?p=40174748&postcount=9&nocache=1
and i am stuck in installing " LGmobile Support Tool " because i am in windows 8 and it is not compitable with it. every time trying to install it seems not responding.
so i am stuck now and donot know how to unbrick it !!! no one tell me to set up win 7 because i donot have one
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
SimonTS said:
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
Click to expand...
Click to collapse
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
kessaras said:
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
Click to expand...
Click to collapse
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
SimonTS said:
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
Click to expand...
Click to collapse
Ok is the tool take some time to load if internet connection is not good ?!!
arrivals18 said:
Ok is the tool take some time to load if internet connection is not good ?!!
Click to expand...
Click to collapse
It shouldn't make any real difference, no.
arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
arrivals18 said:
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
Click to expand...
Click to collapse
mmmmmm.... if at the end u cant do anything and since, propably, your bootloader is unlocked , u can reinstall the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
SimonTS said:
It shouldn't make any real difference, no.
Click to expand...
Click to collapse
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
[email protected] said:
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Yep. every thing ok as u see.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
kessaras said:
mmmmmm.... if at the end u cant do anything and since, probably, your bootloader is unlocked , u can re-install the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
Click to expand...
Click to collapse
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
Click to expand...
Click to collapse
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Click to expand...
Click to collapse
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
RuedasLocas said:
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
Click to expand...
Click to collapse
OK look what i did :
1- connect device with usb cable and holding vol- till it get s/w update
2-when pressing adb reboot bootloader command it gives me unknown error
3- fastboot oem unlock : it gives me device not found
Also tried :
1- connect device to usb cable with holding power+ vol+ to recover mode
2-when pressing adb reboot bootloader command its ok
3- fastboot oem unlock : it gives me FAILED (command write failed (Unknown error))
finished. total time: 0.587s
SimonTS said:
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
Click to expand...
Click to collapse
HOW ?!!!!!!!!
when pressing power with vol+ it gives me the message " This mode is for data backup at service center. After removing and reattachment of battery press power key to reboot and keep using phone" so what how can wipe date/factory reset ?
Power and vol-, not+
Flying_Bear said:
Power and vol-, not+
Click to expand...
Click to collapse
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
arrivals18 said:
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
Click to expand...
Click to collapse
i told you earlier at my post here , that you dont need to flash kdz and go back to stock if ur final goal is a custom rom. u could reinstall recovery using adb bootloader. nevermind -_- u just do things harder for u. bootloader is unlocked u cant unlock the unlocked. bootloader isnt locking again when u just force the stock rom in. there is another procedure u must do to lock it. u can install recovery ( if u havent ) and just install a custom rom
EDIT: you dont need this anymore but ill explain.
adb is used to force files into the device. its a way to communicate with the phone using the pc. u can use the adb to install whatever u like but if u are not sure that the thing u are trying to install is ok for the device, then u will have a problem.
so , since your bootloader is already unlocked, you can go in adb bootloader and force the recovery in.
open cmd:
Lets say i use the teamwin recovery. ill rename it to be easy and save it to desktop. my file is: recovery.zip
open cmd as administrator and go to desktop: cd .....[path to ur desktop]
1. adb start-server
2. adb reboot bootloader
3. fastboot fash recovery recovery.zip
thats it. 3 commands is 10 seconds work. u dont need to go back to stock rom to install a custom rom.
This Thread Is Meant For Unbricking Gionee M2 Device.
Gionee M2 is an awesome device with mediatek 6582 super fast quad core processor loaded with Mali-400 Gpu.Unfortunately I had hardbricked this device thanks to avi3230 for helping me out.Gionee m2 is also rebranded as walton primo hm.
Note:-This is my first thread please tell me if there any mistakes or u won't understand any part of it.All the links have been uploaded by me so if u get any download error let me know.
Important: Download and install gionee phone drivers from here or the process will fail and please read all the points.
Methods:-Using Sp Flash Tools Use tool provided in link don't use old version
NOTE:-For sd ram fail error 4032 u need windows xp to unbrick since installing drivers in windows 7 is big mess which u have to do manually so install xp then do this
Update: camera fix download fromDownload video tutorial from [URL="https://www.sendspace.com/file/n2vvi0"]here
Update:- Since many of u people know gionee had launched kitkat update which is done through flash tools and I knew many of u would have bricked your phone so don't worry just follow the steps and use the kitkat firmware downloaded from gionee site if u want jelly bean then download the flash files provided in post and follow the steps use windows xp.
For SoftBricked Gionee M2 device(Devices that are powering up but only in boot loop or other problems follow this).
Instructions:-
1.Download and extract sp flash tools from here
2.Download the Custom recovery image file that will be flashed on your device from here
3.Extract sp flash tools and open flash tools.
4.Click on scatter loading select MT6582_Android_scatter.txt from new recovery working folder.
5.Check if PRELOADER is highlighted as red or not then continue if its normal then u are good to go.
6.If you have good battery life then keep following these steps or see meta-mode below.
7.Click on download button then attach your usb to phone with your battery inserted the port will be detected and downloading will start.
8.First it will be red then final color will be yellow which means its downloading then it will show download complete.
9.Reboot into recovery it will be CTR recovery do a factory reset then reboot the phone.Voila!!Phone is unbricked:good:
10.If any problems install stock rom through ctr select install zip from sd card
Note:-For going back swipe left.
10.Download and install stock rom from here
12.You can copy this rom to your device using mount usb from mount and storage option.
13.After rom is installed do a factory reset from ctr.
META-MODE Guide:-
Instructions:-
1) Switch OFF Phone..
2) Remove Battery..
3) Click on Download or Format all + download according to what you're following.
4) Connect mobile to PC while holding Volume + button [WITHOUT BATTERY]..
5) Hold the button till flashing completes...
6) After 100% Flash,Release Button..
7)Follow from step 9 Above or for hard brick phone follow step 10 from below.
For HardBricked Gionee M2 device(Devices that don't even powerup).
Instructions:-
1.Download and extract sp flash tools from here
2.Download the flash files from here links:
Part-1:-https://ad f.ly/1C8fM0 (ignoreadded in between)
Part-2:-https://ad f.ly/1C8gmb
3.Extract the files then open flash tools.
4.Click Scatter loading and select scatter file MT6582_Android_scatter.txt from M2 stock files folder.
5.If you had previously flashed wrong rom and hardbricked your device then select format all+download otherwise select download only.
6.Check if PRELOADER is highlighted as red or not then continue if its normal then u are good to go.
7.If you have good battery life then keep following these steps or see meta-mode above.
8.Click on download button then attach your usb to phone with your battery inserted the port will be detected and downloading will start.
9.First it will be red then final color will be yellow which means its downloading then it will show download complete.
10.Now check if your phone is rebooting it will reboot :good: if not rebooting it means it has no battery life just put it on charging while charging it will go in boot loop don't worry its charging ignore it leave it for 30 minutes atleast.
11.Now switch off again then flash custom recovery by following softbricked gionee m2 device instructions.
After flashing files on HardBricked devices.
Your problems are not still finished now after your phone has started u will see invalid imei error .Don't worry u can solve it easily.But if you are not getting this error then don't follow this
Instructions:-
1.First remove battery and copy both M_IMEI And S_IMEI numbers and write it on notepad or anywhere.
2.Download and install mobile uncle tools apk from here
3.Open it and go to engineer mode then for Engineer mode[mtk]
4.Go to connectivity then CDS information.
5.Go to Radio information then phone 1.
6.You will see AT+ and at bottom send command click on AT+ and retype AT+ automatically u will see AT+EGMR=1,7"" and other options.
7.select AT+EGMR=1,7"" and type M_IMEI number in inverted comma's.like this AT+EGMR=1,7"Your Imei number"
8.Click on send command if it shows command is msent then good for u.
9.go back select phone follow step 6 and select 1,10"".
10.Type S_IMEI like u did before in comma's then send command.
11.If command is msent reboot your phone.
12.Then
And sorry now l don't reply on whatsapp so leave a comment I'll be sure to replyIF I HELPED YOU DON'T SAY JUST PRESS THE THANKS BUTTON:good::good::good::good:
No matter what i do, i keep getting S_FT DRAM FAIL ERORR 4032
I previously flashed my phone with the gionee me unofficial 4.2.2, it completed but wont power on and it not flashing any other rom i try
Gionee m2
rhyme4u12 said:
No matter what i do, i keep getting S_FT DRAM FAIL ERORR 4032
I previously flashed my phone with the gionee me unofficial 4.2.2, it completed but wont power on and it not flashing any other rom i try
Click to expand...
Click to collapse
Send me the screenshot use the latest version of flash tools i have uploaded in my post and also download the flash files u don't have to panic u have flashed gionee m2 rom i had flashed gionee g150 some ****ty rom with same specs just follow the steps it will be ok.Contact me if any probs if u stay in mumbai,maharashtra then u could come at my place i will flash for u.
Regards,
Saif Shaikh
My GIONEE M2 is with 1GB ram and 8GBrom, it a version for nigerians, Please can you help me get the stock files. I think it different from yours that's why its not flashing...
My DEVICE:
GIONEE M2
QUAD CORE
1GB RAM
8GB ROM
Please help me beacuse i learnt your own version is 4GB rom
It finally worked for me yesterday using Windows XP,
rhyme4u12 said:
It finally worked for me yesterday using Windows XP,
Click to expand...
Click to collapse
Pls guy I. Hv tried all I cn to hardbrick my own but no result... Pls hw do use window xp to flash urs bcz mine now is not on at all.if I press d power button only the flash light at the back will just blick... Pls I need help.... Here is my number pls call me and I'll call u back 08060389002
gionee m2
onajite said:
Pls guy I. Hv tried all I cn to hardbrick my own but no result... Pls hw do use window xp to flash urs bcz mine now is not on at all.if I press d power button only the flash light at the back will just blick... Pls I need help.... Here is my number pls call me and I'll call u back 08060389002
Click to expand...
Click to collapse
No WhatsApp now
Thanxx rebirth for my m2
Thanxx Saif for helping.It worked.Finally I unbricked my M2
mr
Thanks very much finally I unbreak my daed gionee M2,may God bless U sir @bachir[email protected]
+2348036706644.add mi on whatsapp for live testimony.u r great my Master
Cannot download the the last flash file !
I cannot download the last file from those four file links ..... Can someone please suggest me an alternate link to that 1.83 MB file
Thank You
Il
Volzio said:
I cannot download the last file from those four file links ..... Can someone please suggest me an alternate link to that 1.83 MB file
Thank You
Click to expand...
Click to collapse
Hey bro thanks for commenting the prob I will reupload the file
Gg_hacker said:
Hey bro thanks for commenting the prob I will reupload the file
Click to expand...
Click to collapse
Worked like a charm ..
Thanx
Gg_hacker said:
Call me on my number or whatsapp me +919619006588
Click to expand...
Click to collapse
Dear gurus; URGENT
I update to kitkat 4.4.2 on gionee m2 in Nigeria but my rear (back) camera disappear and stops working afterwards. I had invalid IMEI issue too but I have resolve this. Please how can I resolve the CAMERA issue?
Thanks in anticipation
Unbrick fail
I tried updating my Gionee M2 to the official KitKat ROM from their site, after following every step (I used a window XP SP3), after the initial red coloured bar, I got this message " S_FT DRAM FAIL ERORR 4032 ", now my phone can't boot up, I followed your ubricking step to go back to JB Stock ROM but still getting same message " S_FT DRAM FAIL ERORR 4032 ". I have tried all I could but same message keeps popping up, please is there something I am missing or doing wrong, please help.
cygnis said:
I tried updating my Gionee M2 to the official KitKat ROM from their site, after following every step (I used a window XP SP3), after the initial red coloured bar, I got this message " S_FT DRAM FAIL ERORR 4032 ", now my phone can't boot up, I followed your ubricking step to go back to JB Stock ROM but still getting same message " S_FT DRAM FAIL ERORR 4032 ". I have tried all I could but same message keeps popping up, please is there something I am missing or doing wrong, please help.
Click to expand...
Click to collapse
Am having this same issue hrere. someone help us out pleeeeeeeeeeeaaaaasssee
Dear cygnis and obiomon reinstall the drivers and use another USB port follow this also first just use format all +download all then after format 100% it will show error then again senesce "download only" and flash it should flash properly and use meta mode steps mentioned in this post.
help
Great work.. kudos.
But am getting PMT CHANGED FOR ROM IT MUST BE DOWNLOADED error ... what do i do please?
rhyme4u12 said:
It finally worked for me yesterday using Windows XP,
Click to expand...
Click to collapse
Hello.
Please did u follow the same process or u did something else cause i keep getting "PMT ROM changed EERROR it must ne downloaded"
Please help my number is +2348029615972 whatsapp me or send ur number.
For those who are still having problems using SP flash tool, see the video below
gionee update.zip file not installed
i downloaded the update for gionee m2 8 gb from settings and it did'nt intall correctly and my phone is in bootloop showing system recovery menu sometimes i have tried factory data rest and everything from there but still no help ............please help
Hi friends today I am going to tell you how to root k4 note which have Android 6.0 (M.M).
Many members have already given this process but in some place the needed files are missing and some other place the process is not explained clearly. So to slove this I have made all in one file and given the process as simple as possible by me.
This process have worked very fine for me. Rooted 8 k4 notes without any problem.
Read all and follow. And do it on your own risk. I am not responsible if anything go wrong.
First of all I would like to introduce myself ( I know it's not necessary but to some of them to believe my work )
Myself is Kaushik. I have been using XDA since 2 years but never opened an account and replied in posts. Now after learning a lot I thought I should also start replying. May be I am a junior member here but not truly a junior member.
I have flashed more then 250 mobile of all brands. And thanks to XDA my success rate is 99.7 %
Thanks to XDA to making me local gadget guru. Now here every one believe that if even service center also fail to slove some software problems but at last kaushik will surly pass.
OK now let's see how to root.
(This will void your warranty)
(Phone will factory reset, which means all of the apps and data will be gone, not the internal sd)
(To root Lenovo K4 note you need to first unlock the bootloader. See below to know how to do it )
1. First download the two files from the links I have given.
All files needed to install twrp and root are in one zip file. Link is below.
https://mega.nz/#!D8MAwSzK!BYSzl4FGE_dbLy5wwzS0lbwSSNbelB7eMmfwdQjDoos
Usb ADB drivers for k4 note. Link below.
https://mega.nz/#!281yHDoI!iuIynHRqf8ui7IffStBhwrJvHJ4NBn1eExy_MYpr13o
Now to unlock bootloader.
2. Now in your mobile go to 'Settings' / 'About Device' / press 7 times on built number to unlock Developer options.
3. Now go to Developer options and click on 'OEM Unlocking' and press enable.
4. Next enable the USB debugging.
Your bootloader is now unlocked.
Now in PC extract the downloaded files
5. Install lenovo adb drivers ( it is in the link I have provided ) on your pc
6. Go to adb folder and press and hold shiftkey and right click with mouse. Select open command from here.
7. type adb reboot bootloader You need to authorize the pc if not done already. (The phone will boot onto fastboot, you can see small fastboot written on the left corner of the screen once the phone boots)
8. Now open adb folder and open 'unlock_bootloder'. A message will be displayed in mobile to press volume up key to continue. Press volume up key. A message in pc cmd will display as press any key to continue. Now press any key.
9. Now in cmd type fastboot flash recovery recovery.img
A message will be displayed as done.
Next part is very important
10. After its done press volume up and down button together with power button. Once you see the lenovo white screen, release the power button, release the volume keys once the screen goes black, wait for few minutes till you boot into the new custom recovery.
To avoid black screen set brightness below 30 in twrp settings. ( Not so important if don't understand how to do it )
11. Now the recovery allow modifications by just swiping and the goto mount and tick system and go back
12. Now go to advance, then file manager, then system, and delete the file named, recovery from boot.p ( if you are facing problem plz see point 14. )
13. After done do back and flash supersu.zip. (it is in the link which I have provided)
Now you phone is rooted and the supersu app will appear in the app drawer.
14. If you are facing problem with file manager flash aroma file manager ( it is in the link ). It will open in twrp. Now go to system and delete recovery from boot.p.
If you do not delete the said file again stock recovery will be replaced. If it happens so again you must repeat the steps from step 1.
Next to install xposed after boot up install xposed.apk (app is in the link)
Next flash xposed zip file. (Zip in the link )
Please don't forget to hit thanks if it helped you.
It will make me post more and help others.
Thanks
Regards
Kaushik.
Is this process safe??
HELP ! Fastboot doesn't recognize my device
s230 update brought a lot of issues thus I downgraded to s218 & now on s219. I am able to get adb to recognize my device but not fastboot. Therefore I am unable to unlock bootloader!
When I type in " adb reboot bootloader" or click on the "unlock_recovery.bat" file provided, I get booted into a dark screen where "fastboot" is written at the bottom left & the command prompt window says < waiting for device> & I am stuck there until I reboot my phone.
Paras1259 said:
Is this process safe??
Click to expand...
Click to collapse
Yes it's 100℅ safe bro. But how ever if you do any mistake I will not be responsible.
sujitmohanty2012 said:
s230 update brought a lot of issues thus I downgraded to s218 & now on s219. I am able to get adb to recognize my device but not fastboot. Therefore I am unable to unlock bootloader!
When I type in " adb reboot bootloader" or click on the "unlock_recovery.bat" file provided, I get booted into a dark screen where "fastboot" is written at the bottom left & the command prompt window says < waiting for device> & I am stuck there until I reboot my phone.
Click to expand...
Click to collapse
I Too have faced same problem. But I have installed all the drivers and it started working back to normal. So install the drivers which I have given in the link. Plz hit thanks if helpful. And plz make sure you have unlocked bootloader in developer options
Ongoli Koushik said:
I Too have faced same problem. But I have installed all the drivers and it started working back to normal. So install the drivers which I have given in the link. Plz hit thanks if helpful. And plz make sure you have unlocked bootloader in developer options
Click to expand...
Click to collapse
Thank you for the followup! I am surely gonna give this another go
What is the version of TWRP...
Sent from my Vibe K4 Note using XDA Labs
the internal memory is almost full after flashing twrp by this method.. any solution
the internal memory is almost full after flashing twrp by this method.. any solution plzz..
I am going to flash a new rom (6.0.1 ROM) ... So do I just flash Xposed??
anaynymous said:
I am going to flash a new rom (6.0.1 ROM) ... So do I just flash Xposed??
Click to expand...
Click to collapse
i have a7010a48 and after flash to S219_160810_row missing imei and Version of the radio module.How to fix it.
sujitmohanty2012 said:
s230 update brought a lot of issues thus I downgraded to s218 & now on s219. I am able to get adb to recognize my device but not fastboot. Therefore I am unable to unlock bootloader!
When I type in " adb reboot bootloader" or click on the "unlock_recovery.bat" file provided, I get booted into a dark screen where "fastboot" is written at the bottom left & the command prompt window says < waiting for device> & I am stuck there until I reboot my phone.
Click to expand...
Click to collapse
Bro you have to reset your lenovo vibe k4 note using spflash tool
bro, how to enter recovery mode for second time? i try press volume up+down+power, after white screen i release power button, after black screen i release all button, but nothing happend.. your tutorial fully working, i can install supersu.. plz help me..
salaminder said:
bro, how to enter recovery mode for second time? i try press volume up+down+power, after white screen i release power button, after black screen i release all button, but nothing happend.. your tutorial fully working, i can install supersu.. plz help me..
Click to expand...
Click to collapse
Check this . you will be able to know
https://www.youtube.com/watch?v=uF_F0G2eEhg
---------- Post added at 01:09 PM ---------- Previous post was at 01:09 PM ----------
udeshdhiman said:
Bro you have to reset your lenovo vibe k4 note using spflash tool
Click to expand...
Click to collapse
Why do I reset?
Is this ROM works for all ROW numbers?
Hi Koushik,
I have some questions,
Is this ROM works for all ROW numbers? present my device having s232 ROW.
Is this process will erase internal memory, coz i want to root my device to recover some files from internal memory.
Can you give me replay on this
Thanks.
My Phone Volume Down broken
Hi Bro.
My volume down button was broken, any alternate method
ask
does it work in android 5.0 s152?
stock recovery
please i need stock recovery lenovo a7010a48 s232
can i delete TWRP
alsa7er said:
please i need stock recovery lenovo a7010a48 s232[/QUOTE
Flash whole rom via sp flash tool
Click to expand...
Click to collapse
naandha114 said:
alsa7er said:
please i need stock recovery lenovo a7010a48 s232[/QUOTE
Flash whole rom via sp flash tool
Click to expand...
Click to collapse
ok thank you:good:
Click to expand...
Click to collapse
I tried installing crDroid (unlock bootloader, uploaded FW, recovery SHRP, then install ROM) and after reboot the phone would go back to recovery.
By mistake I "installed" SHRP from ZIP package (I thought I need to install latest recovery file to install ROM with android 12) and phone went into reboot loop, I can't do anything, any key combination doesn't help - I can't even turn it off.
help!
I opened the phone, disconnected the battery, but nothing happened - still bootloop
I'm planning to use SP Flash Tool
Immediately after connecting USB C, the phone boots into bootlop (after disconnecting and reconnecting the battery)
What happens when you flash the custom ROM?
Try to flash the stock firmware and miui
again. Download the latest miui recovery ROM for Lancelot and copy it to the sd card. If you can still boot into recovery you can connect the phone with a PC.
You can also try to reboot into bootloader if the reboot options work from sharp, if not connect the phone to a PC with adb and fastboot installed on it and type:
Code:
adb reboot bootloader
And now if you are in fastboot you can do anything, you can try to reflash the firmware, recovery etc.
I personally don't use SHRP, it was really buggy and not great. I use the twrp from this link: https://forum.xda-developers.com/t/recovery-twrp-unofficial-twrp-recovery-3-6-1_11-0.4421301/.
Thanks for reading and I hope u succeed,
Bye.
U can also try to flash it with MI flash tool.
Sergij-SApcPro said:
What happens when you flash the custom ROM?
Click to expand...
Click to collapse
Operation completed with status [ ]. It looks like there should be a * in the middle and then it would be a sign to me that the ROM is loaded.
Sergij-SApcPro said:
Try to flash the stock firmware and miui
again. Download the latest miui recovery ROM for Lancelot and copy it to the sd card. If you can still boot into recovery you can connect the phone with a PC.
Click to expand...
Click to collapse
At the time of writing, no key combination was working - I can't get into Fastboot or Recovery. I let the battery run out for that moment.
Sergij-SApcPro said:
You can also try to reboot into bootloader if the reboot options work from sharp, if not connect the phone to a PC with adb and fastboot installed on it and type:
Code:
adb reboot bootloader
And now if you are in fastboot you can do anything, you can try to reflash the firmware, recovery etc.
I personally don't use SHRP, it was really buggy and not great. I use the twrp from this link: https://forum.xda-developers.com/t/recovery-twrp-unofficial-twrp-recovery-3-6-1_11-0.4421301/.
Thanks for reading and I hope u succeed,
Bye.
Click to expand...
Click to collapse
Sergij-SApcPro said:
U can also try to flash it with MI flash tool.
Click to expand...
Click to collapse
That's what I'll do first, then move on to the solution below.
I opened the phone and disconnected the battery, but plugging in the USB cable immediately turns the phone on and bootloops again.
I'm using Linux and Windows, and one user hinted at hacking the USB driver so I believe it won't boot the phone, only then will I have communication? Other than that I don't know how to do it anyway.
For now, after the phone's battery runs out, I'll try with this solution
MTK Authorisation Bypass
Thanks to Dinolek ErdilS xyzz **All Steps Are Mandatory, Don't Skip Any Of Them** How to install: 1. Download the attached file: Alternate Download:https://anonfiles.com/l0yeSfD2u7/MTK-Bypass_zipAlternate Download:https://dl.uploadgram.me/6126628127c5fh?raw 2. Extract the file and open the...
telegra.ph
I've exhausted the battery, Mi Flash needs Fastboot, which I don't have.
I used
Deleted Account in Redmi Note 9 / Redmi 9 / 10X 4G Community
• Unbrick method for basically any device covered in this group. - Download SP Flash Tool from here. - Download the corresponding Engineering ROM for your device using #engrom - Download this zip and extract it. You Should find a DA file and an auth file in it. - Do the steps in this video...
t.me
I got to the point of connecting the phone to the computer and it connects (the procedure says to use the Power button, but I had to disconnect the battery because Bootloop was falling in), using the Vol- button - the phone keeps connecting and disconnecting....
For a while I tried to connect the phone via SP Flash under Linux - in administrator mode the message "memory protection violation" appears (I don't know how the message is in English).
Adding a udev exception was supposed to help - after lsusb the Mediatek device appeared, I added the exception, restarted - and the same thing happens (the program crashes).
I finally managed (with the help of a group on telegram https://t.me/HelioG85_Unified) by switching off the phone and carefully going through all the points (except the update at the very end) from this link
MTK Authorisation Bypass
Thanks to Dinolek ErdilS xyzz **All Steps Are Mandatory, Don't Skip Any Of Them** How to install: 1. Download the attached file: Alternate Download:https://anonfiles.com/l0yeSfD2u7/MTK-Bypass_zipAlternate Download:https://dl.uploadgram.me/6126628127c5fh?raw 2. Extract the file and open the...
telegra.ph
There is a little problem, because SP Flash must be from the link in this post (because it will not fit DA)
Deleted Account in Redmi Note 9 / Redmi 9 / 10X 4G Community
• Unbrick method for basically any device covered in this group. - Download SP Flash Tool from here. - Download the corresponding Engineering ROM for your device using #engrom - Download this zip and extract it. You Should find a DA file and an auth file in it. - Do the steps in this video...
t.me
Wow so many posts... Did you manage to fix the phone now? What do you mean by SP Flash will not fit the DA? Did you download the eng ROM for Lancelot? BTW I haven't done this kind of thing, but when I tried to flash my Lancelot with SP Flash tool it didn't work, because it was just waiting for device.
Sergij-SApcPro said:
Wow so many posts...
Click to expand...
Click to collapse
Often when reading threads I see "managed to fix, thanks!" but it doesn't say what and how, so that's why so many posts - so someone knows what was going on.
Sergij-SApcPro said:
Did you manage to fix the phone now?
Click to expand...
Click to collapse
Yes
Sergij-SApcPro said:
What do you mean by SP Flash will not fit the DA?
Click to expand...
Click to collapse
Other versions of SP Flash (newer) other than in the package with ENGROM didn't work with DA file with manual from links given above - it had to be the one from the package. SP Flash showed errors and crashed or informed about wrong file.
Sergij-SApcPro said:
Did you download the eng ROM for Lancelot?
Click to expand...
Click to collapse
Yes
Sergij-SApcPro said:
BTW I haven't done this kind of thing, but when I tried to flash my Lancelot with SP Flash tool it didn't work, because it was just waiting for device.
Click to expand...
Click to collapse
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Great to hear that you fixed the phone, congratulations!
TomekParuszewski said:
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Click to expand...
Click to collapse
Thanks for the info, but I don't need to flash it with SP Flash tool because that was earlier when I didn't try to install custom recovery. Now I have SHRP with CRDroid A12 and its Awesome.
Thanks for reading,
Bye
TomekParuszewski said:
Often when reading threads I see "managed to fix, thanks!" but it doesn't say what and how, so that's why so many posts - so someone knows what was going on.
Yes
Other versions of SP Flash (newer) other than in the package with ENGROM didn't work with DA file with manual from links given above - it had to be the one from the package. SP Flash showed errors and crashed or informed about wrong file.
Yes
I think that if you go through the MTK Bypass process carefully, step by step, you may succeed, as I did.
Click to expand...
Click to collapse
What version of SP Flash tools did you use? I'm running into this (status_ext_ram_exception error) kind of error while trying to flash the firmware provided in the Telegram channel.
SandShadow said:
What version of SP Flash tools did you use? I'm running into this (status_ext_ram_exception error) kind of error while trying to flash the firmware provided in the Telegram channel.
Click to expand...
Click to collapse
yes, im stuck at same error. any ideas? someone said we should let the phone completely discharge, im waiting on that, but just incase any other ideas...
voland34 said:
yes, im stuck at same error. any ideas? someone said we should let the phone completely discharge, im waiting on that, but just incase any other ideas...
Click to expand...
Click to collapse
The battery trick does'nt work for me. I can't remember exact version, sorry - but my way was going BACK with SP Flash tool version (from newest to working with file). When I found right version the rest was only going with procedure.
I did it twice: first time I was scared, second - with finding right version of SPFT, every time - like walk in the park. Looong walk all procedure was like 2-3 hours.
Second one try was after trying to load Andorid 13 (2x). Don't do it kids!
After all, my Revolut app stop working lately on my phone and Redmi is retired for now... (and also becoming unusable because slowing dramatically)
Thanks for your answer. it has worked with battery empty (though that might not have benn necessary); not on 1st atttempt v5.2020 but it did with version 5v.2216 in case it might help someone...it didnt flash miui fastboot rom 12.5 but it did flash engineering rom. and from there i will twrp and miui.
Thanks for your suggestion of trying different spflash versions.
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Andris85 said:
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Click to expand...
Click to collapse
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
gurtnyi said:
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Click to expand...
Click to collapse
Just the boot.ini. but I think this would make fastboot mode work. But it's not working
tutibreaker said:
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
Click to expand...
Click to collapse
What should I use to reflash? Mi flash? This is the NS
Yes... I probably mixed up the boot file in the downloads folder and not the correct received flash
Click to expand...
Click to collapse
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
gurtnyi said:
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
Click to expand...
Click to collapse
yepp, enable oem unlock. But fastbootmode is required for all operations. But fastboot mode doesn't work.
What do you mean it doesn't work?
Can't enter into fastboot mode?
gurtnyi said:
What do you mean it doesn't work?
Can't enter into fastboot mode?
Click to expand...
Click to collapse
Can't enter fastboot mode. The device only shows "Redmi" lettering. If fatboot worked, I could have done it already. power+volume down, the device just restarts and shows "redmi".
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
gurtnyi said:
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
Click to expand...
Click to collapse
it just restarts, as long as I press and hold volume down+power, if I don't press it, it just shows the redmi text
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
gurtnyi said:
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
Click to expand...
Click to collapse
TXH
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Pegelaar_NL said:
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Click to expand...
Click to collapse
Yep, this guy here 's got the point. If you can't flash with sp flash tool because auth fail, there's a method to bypass it.
You can find the tutorial here: https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/
I also got some help from this guy's post, many thanks to him too.
https://forum.xda-developers.com/t/...ad_da_fail-0x7d4-2004-for-mtk-phones.3692259/
Let us know how it's going with it! ;D
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buytoday there is a lot of devices for gaming like rog phone and red magic
Click to expand...
Click to collapse
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Click to expand...
Click to collapse
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
tutibreaker said:
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Click to expand...
Click to collapse
If you can root it easily, then the expensive one is good for me! Normal root was not available for typical gamer phones for years. If I buy something for which root may not be available, then I'm wasting my money...
gurtnyi said:
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
Click to expand...
Click to collapse
I will look today