Bricked P9 EVA-L09 C432 - Huawei P9 Questions & Answers

Hi Guys am new to all this so bear with me
I have just tried to update my EVA-L09 P9 phone to android 7 (383) and it seems to have crashed around 37% restarting the phone and now it just boots once and then goes into recovery mode.
I have tried to install many images using the force update method (VOL+ + VOL- + POWER with update.app in DLOAD folder) but no luck, they all fail at 5%
Firmware downloads -
HUAWEIP9L09C432B182
EVA-L09C432B378
dload-huawei-p9-eval09-eva-b136
Is there a way to get my phone back up and running? I have seen a couple of posts but nothing that tells you an exact way.
Thanks in advance.

Your FRP is unlock?

try to unlock bootloader. get the unlock code on emui huawei

HuaFanCalcutta said:
Your FRP is unlock?
Click to expand...
Click to collapse
Hi, thank you for your reply
This is a stock phone with no FRP Unlock

jacko9966 said:
Hi, thank you for your reply
This is a stock phone with no FRP Unlock
Click to expand...
Click to collapse
Go to service center

Related

P9 Bricked, Bootloader Locked. No TWRP Installed. FML (Send Help)

Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
I think there is not solution for this problem. We have to wait. (I have the same problem but in Al00 running Al19 rom)
How do you check for FRP lock on a Huawei phone just curious.
ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you
kyle_2103 said:
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you
Click to expand...
Click to collapse
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.
ChaseRxx said:
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.
Click to expand...
Click to collapse
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
I've tried some command in fastboot mode but there's always an error: Remote: command not allowed.
I can't do anything with fastboot mode
1. Try to force update with Power Button + Min Vol Button + Max Vol Button, liked you said this isn't working try to do the button combination with the phone connect it to the PC; in my case some times dload din't works after I connected the phone to the computer.
2. Other thing, something happend if you turn of the phone and leave Max Vol Button pressed, you should be entering to eRecovery.
3. Remember that sometimes enter in eRecovery mode requires to the phone be turn off otherwise you can't access to Recovery. So if this is the case follow bullet #2 and them #1.
PD: OFC I'm assuming you already have the dload folder with an compatible version of stock ROM on your SDCARD. If you don't have any version tries this one: https://forum.xda-developers.com/p9...dload-file-p9-eva-l09-b136-t3382818?nocache=1
Hope I helped you, I already bricked twice my P9 corrupting System Table Partitions.
Jeremy Molina.
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
If you did the change of Unlock OEM before the bricked in an previous authorized computer you will still have rights for, otherwise new Android Security features is going to rejected the request.
Exacly
Dload/ no network
ChaseRxx said:
Exacly
Click to expand...
Click to collapse
Hi guys! Im new sorry if posted in wrong place/topic, I did dload method as here https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818 to debrand my L09 Vodafone to stock software and now I end up in EVA-C900B136 and my sim card/network is not working anymmore I had download the software package is in the above post and did force flash.
Many thanks for help!!!
kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.
dondrog said:
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.
Click to expand...
Click to collapse
fastboot oem unlock (followed by bootloader code)
kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello gays i install nougat 7
install with TWRP after install my phone is no keybord no all problems and i can`t active oem waht i do all command
remote not allowed coomand and i try to install all veriosn but still problem please help me
i install
EVA-L19C432B322-update
and my phone 6369C-EVA L19
my mistake please help me
i try to swoftware sim but swoftware failed
--
incompatibility with current version please download the correct update package
i upload vedio on youtube see please https://www.youtube.com/watch?v=V2yH...ature=youtu.be
sry for my bad engilsh
Any help would be greatly appreciated
I have a P9 L09, i have unlocked the bootloader, flashed TWRP recovery, and started flashing some roms. I have succesfully flashed a cyanogenmod, and it booted properly, but when it started it asked me for a password which i did not know, so i google searched and found out that it is a common issue and i need to wipe data from recovery. I tryed that but it did not work it says failed, and nothing works in the wipe advanced section, beside system. And also in the custom recovery it says that the internal storage has 0MB ! I was able to put other custom roms on the SDcard and flash them, they booted but every single one asks for the password.. I then tryed to install stock rom with the dload method, but it crashes and 40% , and i tryied the System Recovery option in HiSuite and it says it is not compatible with my device. Any help would be greatly appreciated! Thank you!
kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello. I have the same problem. I have my unlock code but in fastboot, adb command says it failed. Sorry for bad english. What can i do?
FAILED: REMOTE COMMAND NOT ALLOWED FINISHED.
Same problem on my honor &x locked bootloader and bricked. unlocking the oem like you said above does not work

P9 Bricked - Boot loop please help

Hi all,
I am facing severe problems with my P9.
Initial Situation:
Started with a brand new P9 with T-Mobile cust Firmware C150
What I did:
I unlocked bootloader successfully and rooted the phone. Then changed OEM info from C150 to C432. So far so good.
After that P9 booted into factory restore and restored itself into C900 Firmware. Bootloader was locked after that.
I unlocked bootloader successfully for a 2nd time.
Current Situation:
Now when I boot the phone it says: "Your device has been unlocked and can't be trusted" .... Your device is booting now... => But it never boots into OS. It stucks here forever.
When I press vol up and down and power for some seconds I can at least access TWRP. When I try to reboot in TRWP it says "No OS Installed".
But how can I do a stock recovery or install a working Android OS in order to get the P9 into normal boot Modus again?
Please help me.
Solution summary:
Issue solved by using the dload method to change to C432B182:
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
Thx a lot
Hope this helps
https://www.youtube.com/watch?v=JZVsIKtdgV4
morro23 said:
Hi all,
I am facing severe problems with my P9.
Initial Situation:
Started with a brand new P9 with T-Mobile cust Firmware C150
What I did:
I unlocked bootloader successfully and rooted the phone. Then changed OEM info from C150 to C432. So far so good.
After that P9 booted into factory restore and restored itself into C900 Firmware. Bootloader was locked after that.
I unlocked bootloader successfully for a 2nd time.
Current Situation:
Now when I boot the phone it says: "Your device has been unlocked and can't be trusted" .... Your device is booting now... => But it never boots into OS. It stucks here forever.
When I press vol up and down and power for some seconds I can at least access TWRP. When I try to reboot in TRWP it says "No OS Installed".
But how can I do a stock recovery or install a working Android OS in order to get the P9 into normal boot Modus again?
Please help me.
Thx a lot
Click to expand...
Click to collapse
If u have a sd card u can put it in another phone if u have and create a dlod folder, put the Firmware u need in it and then switch it to your P9 and try to upgrade. Since your phone is C900 i think something went wrong in the debranding so use a full stock C150 firmware or try with this B136 Firmware with dt and hw folder toghether with update.app in dload folder.
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
Sent from my VIE-L29 using XDA Labs
@panosm763: Thx for the Video link. I worked according to the same but after changing OEM info phone booted with red warning Screen and installed a fresh C900 Firmware Version. Then after opening bootloader again, SRK Tool cannot connect to the phone anymore maybe due to the fact that usb Debugging mode is not turned on (and cannot be turned on because OS is not reachable)
@Mostar088: I tried the dload method yesterday with the Firmware from the link you shared. Unfortunately without success. The phone did not recognize the Firmware and did not load the same. Maybe because bootloader is still open? I have no clue why this method is not working
Issue was solved.
It worked out fine using the dload method described in here:
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
I am now on C432B182 :good:
morro23 said:
Issue was solved.
It worked out fine using the dload method described in here:
https://forum.xda-developers.com/p9/...-b136-t3382818
I am now on C432B182 :good:
Click to expand...
Click to collapse
Link doesnt work for me :? please again ?
MyTiplay said:
Link doesnt work for me :? please again ?
Click to expand...
Click to collapse
Fixed :good:
Sorry for being late, i had no spare time the past days. Glad you fixed your problem

P9 bricked after relock bootloader (can't enter Fastboot mode etc...)

Hello,
I unlocked my bootloader,
installed twrp (this version ->),
tried to install CM13, but failed because of failed to mount /data
fixed that by formatting data
tried again to install CM13 but it still didn't work, because failed to mount /system
i gave up and did a restart just to realise that there is no system anymore i was stuck in a bootloop,
i decided to go back to Stock and used fastboot to install stock recovery for MM using SRK Tool,
choose to relock my bootloader and after the process it said "the device will now restart to perform a factory reset"
since then i'm stuck at the Huawei Logo (i think my device is stuck because it tries to enter the rom to perform the factory reset but there is nothing it can enter so it's stuck),
i tried to enter fastboot mode but it didn't work,
i can't even turn off my phone because every time i hold the Powerkey the phone just restarts
right now i'm downloading the ROM dload file and hope this will help me.
do you have any ideas/thoughts about this, do i have any chance to save my device ?
EVA-L09
was running emui 5 (B361 i think?)
Dload didn't work nothing happend.... is there anyway huawei will repair this ? if yes how much will it cost ? is there a chance they will repair it (warranty) even tho it was my fault, if i don't tell them what i did and play dumb?
If you power off the phone, and then press and hold the Volume Down key, THEN plug in the USB cable (attached to a PC), does this enter Fastboot mode? (white screen with Android logo)
ConfusedTA said:
If you power off the phone, and then press and hold the Volume Down key, THEN plug in the USB cable (attached to a PC), does this enter Fastboot mode? (white screen with Android logo)
Click to expand...
Click to collapse
No that doesn't work,
i now leave it on to run out of battery and then i try it again.
Yes - let it go completely flat.
Then, press and hold the Volume Down key, and plug the USB cable in. Once you're at this stage, you can use DC-Phoenix to update the firmware. Once this is successfully done, you then power the phone off, press and hold both volume buttons, and re-connect the USB. This puts it into Upgrade mode, and you can use DC-Phoenix again in Upgrade Mode to write the same firmware to it. Once you have done this, you should hopefully have restored your phone.
You may need to go back to an earlier firmware, such as B136, then go through the upgrade path again, if it does not work with B361.
thanks i will try this
it worked ! i unlocked the bootloader again and i tried to install different version of the Stock ROM (b182,b300,b361) i was able to flash b182 and B361 without errors by flashing system,recovery and boot.img but my phone always boots into erecovery and i have no clue why ?
I was in a similar position - until I did the steps I noted with DC-Phoenix.
You don't need to mess around with unlocking the bootloader by using DC-Phoenix.
what is so special about DC-Phoenix and why does this cost 15 Euros for 72 Hours ???
i had the same situation sir
i don't know what to do now
there is no huawei service center in our country
i cant use dc phoenix because i cant pay the 15 euros via paypal
there is a login form before u can use the dc unlocker
please any one help me on this
pls give me account in dc phoenix
i will give the money back via remittance
because i dont have a bank
vinfrix said:
i had the same situation sir
i don't know what to do now
there is no huawei service center in our country
i cant use dc phoenix because i cant pay the 15 euros via paypal
there is a login form before u can use the dc unlocker
please any one help me on this
pls give me account in dc phoenix
i will give the money back via remittance
because i dont have a bank
Click to expand...
Click to collapse
What is your problem?
Rafa Mistry said:
What is your problem?
Click to expand...
Click to collapse
EVA-L09C432B180
LG-U+ SOUTH KOREA
hello guys
i have a serious problem here
this is what happen to my P9 when i try to unlock/root/install twrp
first i used SRK long chod v2.0 tool
the first step i do is unlock the bootloader and yes i can say it works
i unlock the FRP and Bootloader
then i proceed to the next target. installing the twrp recovery
i try so the twrp version inside the SRK tool
but doesnt work then i look some version from
official twrp website , same again does not work either
so i skip that part , and stop going further in order to
back my phone to unvoid the warranty
there is an option in SRK tool which you can relock your bootloader again
so i did relock my bootloader and after rebooting the system
boot stuck appears
no fastboot/no recovery/no system
even the key combination does not
work like forced update via sdcard/dload/update.app
i have no idea what to do now
but i read the thread from SCRAFI
that he used the DC Phoenix and
resurrect his bricked P9
i want to try that solution but i have a problem on that
i cant buy credits for 15 euros i dont have
any e-payment online like paypal bankcards/debit
because before you can use the dc phoenix tool
you are required to login your reserve account
for able to use it. and that is why im so hopeless that
i can ressurect my phone again
please help
please give me some account login for dc phoenix
and promise to bring back the 15 euros via
remittance or any available bank payments..
please. any one who has a big hand
please help me
sorry for wrong english grammar
vinfrix said:
EVA-L09C432B180
LG-U+ SOUTH KOREA
hello guys
i have a serious problem here
this is what happen to my P9 when i try to unlock/root/install twrp
first i used SRK long chod v2.0 tool
the first step i do is unlock the bootloader and yes i can say it works
i unlock the FRP and Bootloader
then i proceed to the next target. installing the twrp recovery
i try so the twrp version inside the SRK tool
but doesnt work then i look some version from
official twrp website , same again does not work either
so i skip that part , and stop going further in order to
back my phone to unvoid the warranty
there is an option in SRK tool which you can relock your bootloader again
so i did relock my bootloader and after rebooting the system
boot stuck appears
no fastboot/no recovery/no system
even the key combination does not
work like forced update via sdcard/dload/update.app
i have no idea what to do now
but i read the thread from SCRAFI
that he used the DC Phoenix and
resurrect his bricked P9
i want to try that solution but i have a problem on that
i cant buy credits for 15 euros i dont have
any e-payment online like paypal bankcards/debit
because before you can use the dc phoenix tool
you are required to login your reserve account
for able to use it. and that is why im so hopeless that
i can ressurect my phone again
please help
please give me some account login for dc phoenix
and promise to bring back the 15 euros via
remittance or any available bank payments..
please. any one who has a big hand
please help me
sorry for wrong english grammar
https://www.youtube.com/watch?v=https://youtu.be/2HrllM9iLzs
Click to expand...
Click to collapse
Your System is nougat & srk 2.0 have twrp for Marshmallow. Just turn of your phone & HOlD Volume Down button & connect usb to your pc than sent your phone screen picture
Rafa Mistry said:
Your System is nougat & srk 2.0 have twrp for Marshmallow. Just turn of your phone & HOlD Volume Down button & connect usb to your pc than sent your phone screen picture
Click to expand...
Click to collapse
in this stage my phone is marshmallow sir
i think im not i nougat version
android 6.0
i will try sir
vinfrix said:
in this stage my phone is marshmallow sir
i think im not i nougat version
android 6.0
i will try sir
Click to expand...
Click to collapse
Turn of your phone & HOlD Volume Down button & connect to your pc
Rafa Mistry said:
Turn of your phone & HOlD Volume Down button & connect to your pc
Click to expand...
Click to collapse
not working sir
phone is only in charge mode
not booting up
when i try to boot
it stuck in huawei boot logo
and start to vibrate twice
vinfrix said:
not working sir
phone is only in charge mode
not booting up
when i try to boot
it stuck in huawei boot logo
and start to vibrate twice
Click to expand...
Click to collapse
Turn of your phone & HOlD Volume Down & Connect USB of pc
I know this is very necro, but I've come to encounter the same problem. However my situation is weirder. I did very similar steps: wanted to go to stock and used SRK Toolkit to flash the recovery and relock the bootloader, I'm guessing it was not the correct twrp version for my current os. I should state that I don't understand anything about how huawei works... by now I just want the damn thing to boot . My situation is that the phone vibrates and displays the huawei bootlogo and then hangs. I've let the battery die and then do the Vol- + Usb thing but it doesn't give a f***. It just keeps going to the huawei logo. I've already ordered a pentalobe screwdriver on amazon to try and disconnect the battery cable...maybe it'll make a difference, since its kinda sketchy to try to let it die but no so much that it won't even boot and just shows the charging icon...:angel: ***fingers crossed*** anyways if someone has any hints I'd aprecciate it. Wish me luck, cheers
Edit: today, 3 days later, I re-tried to enter fastboot with vol - and usb in pc and IT WORKED!! unlocked the bootloader and now everything is fine.

Stuck in erecovery with FRP Lock and Bootloader Lock

Hey everyone, i had rooted my P10 and was so stupid to install Xposed installer via Magisk, since then i have truble. After installing xposed i stucked in bootloop and then i installed the Xposed uninstaller Zip after that i hat to make an factory reset and stuck at an FRP lock.
From then i tried to relock and unlock the bootloader but it won´t work.
So for now i have FRP locked, bootloader locked and when i try to start the Phone the eRecovery appears but can´t connect to the server to download an System file. Can anybody help me how i can fix this ? Regards
Same problem.
Locked bootoader and can't boot to system.
Boots in erecovery but can't download update.
Can't verify firmware..
Last firmware was oreo.
tomzzi said:
Same problem.
Locked bootoader and can't boot to system.
Boots in erecovery but can't download update.
Can't verify firmware..
Last firmware was oreo.
Click to expand...
Click to collapse
Hey guys, i have the same problem although my phone isn't rooted. My bootloader is locked and i can't boot it normally. When i shut down or restart the phone it open on Huawei eRecovery and when choose to download the update/recovery says failed to connect to server. Has anyone any ideas? Thanks a lot.
can you go to fastboot and unlock it ?
the-bomber said:
can you go to fastboot and unlock it ?
Click to expand...
Click to collapse
I entered in fastboot but it says phone Locked and FRP Locked...
mihos13 said:
I entered in fastboot but it says phone Locked and FRP Locked...
Click to expand...
Click to collapse
can you try the recovery feature on Hisuite?
the-bomber said:
can you try the recovery feature on Hisuite?
Click to expand...
Click to collapse
I tried but it says "The device doesn't support for recovery".
Now what?
mihos13 said:
I tried but it says "The device doesn't support for recovery".
Now what?
Click to expand...
Click to collapse
You could use testpoint method, check guides threads! i wish you luck :fingers-crossed:

BRICKED honor 9 lite lld-l31

So, basically i changed oeminfo in twrp and it locked bootloader. However when the phone restarted I got a message saying "your device has failed verification and may not work properly". And since the bootloader is now locked and frp is also now locked i can't unlock the bootloader even though i have the code.
I think my device was originally eu c432, and i changed it to ru c10 through twrp. When i try and flash the latest c10 emui 9.1.0.168 to try and fix the verification error it fails to flash. Any help to try and fix my device will be greatly appreciated.
Thanks to everyone in advance!!!!
if I understand correctly, do you still have TWRP on board? If you can reboot to TWRP, flash in this .zip file . FRP status will change to unlock.
-Alf- said:
if I understand correctly, do you still have TWRP on board? If you can reboot to TWRP, flash in this .zip file . FRP status will change to unlock.
Click to expand...
Click to collapse
thanks for the quick reply. I just tried and it boots to erecovery but in chinese, i havnt touched anything yet but there is no twrp, even though i did not actually remove it.
Thanks for the reply!
epicmann24 said:
thanks for the quick reply. I just tried and it boots to erecovery but in chinese, i havnt touched anything yet but there is no twrp, even though i did not actually remove it.
Thanks for the reply!
Click to expand...
Click to collapse
Imo it's not eRecovery, but Recovery. Try to boot into eRecovery and use option "Download latest version etc" via wi-fi (connect the phone to charger or PC then press and hold Power and Volume Up. )
First line (option) on screen).
-Alf- said:
Imo it's not eRecovery, but Recovery. Try to boot into eRecovery and use option "Download latest version etc" via wi-fi (connect the phone to charger or PC then press and hold Power and Volume Up. )
First line (option) on screen).
Click to expand...
Click to collapse
Ok, so i booted into eRecovery and did wifi recovery, however i am presented with this screen.....
epicmann24 said:
Ok, so i booted into eRecovery and did wifi recovery, however i am presented with this screen.....
Click to expand...
Click to collapse
aka "getting package info failed!" . Sadly the server can't recognize your phone in this state.
-Alf- said:
View attachment 5649239
aka "getting package info failed!" . Sadly the server can't recognize your phone in this state.
Click to expand...
Click to collapse
So does this mean my device is hard bricked? Is there no way to recover my device?
epicmann24 said:
way to recover
Click to expand...
Click to collapse
A. Testpoint method
B. paid services
-Alf- said:
A. Testpoint method
B. paid services
Click to expand...
Click to collapse
Can you send a free Testpoint tutorial? all the ones i found online are paid software.
thanks.
epicmann24 said:
Can you send a free Testpoint tutorial? all the ones i found online are paid software.
thanks.
Click to expand...
Click to collapse
I've never used a testpoint, so I don't have software. And I don't own LLD-L31, just ANE-L21 (twin).
But I can give you a link to Board 1.0.0.42 for LLD (without losing imei, with IDT 2.0.0.9 + Huawei usb com 1.0. driver). Reliable source, tested.
Download
-Alf- said:
I've never used a testpoint, so I don't have software. And I don't own LLD-L31, just ANE-L21 (twin).
But I can give you a link to Board 1.0.0.42 for LLD (without losing imei, with IDT 2.0.0.9 + Huawei usb com 1.0. driver). Reliable source, tested.
Download
Click to expand...
Click to collapse
After flashing board software i flashed emui 9.1.0.116 via dload, and then i flashed corvus os gsi and everything is working great!
All your help was greatly appreciated, thank you very much!
No problem.
Pls send me twrp for honor 9 lite lld l31 emui 9.1. 0
Arsh333 said:
Pls send me twrp for honor 9 lite lld l31 emui 9.1. 0
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/recommended-and-tested-twrp-recovery.4199099/
-Alf- said:
https://forum.xda-developers.com/t/recommended-and-tested-twrp-recovery.4199099/
Click to expand...
Click to collapse
Is it work?
What do we need to install on laptop to install twrp
Arsh333 said:
Is it work?
Click to expand...
Click to collapse
???
Arsh333 said:
Arsh333 said:
What do we need to install on laptop to install twrp
Click to expand...
Click to collapse
Click to expand...
Click to collapse
"Minimal ADB and fastboot", for example.
It's opening erecovery not twrp
Pls tell how to go in twrp recovery instead erecovery

Categories

Resources