Database Develop

Stuck in erecovery with FRP Lock and Bootloader Lock

Hey everyone, i had rooted my P10 and was so stupid to install Xposed installer via Magisk, since then i have truble. After installing xposed i stucked in bootloop and then i installed the Xposed uninstaller Zip after that i hat to make an factory reset and stuck at an FRP lock.
From then i tried to relock and unlock the bootloader but it won´t work.
So for now i have FRP locked, bootloader locked and when i try to start the Phone the eRecovery appears but can´t connect to the server to download an System file. Can anybody help me how i can fix this ? Regards

Same problem.
Locked bootoader and can't boot to system.
Boots in erecovery but can't download update.
Can't verify firmware..
Last firmware was oreo.

tomzzi said:
Same problem.
Locked bootoader and can't boot to system.
Boots in erecovery but can't download update.
Can't verify firmware..
Last firmware was oreo.
Click to expand...
Click to collapse
Hey guys, i have the same problem although my phone isn't rooted. My bootloader is locked and i can't boot it normally. When i shut down or restart the phone it open on Huawei eRecovery and when choose to download the update/recovery says failed to connect to server. Has anyone any ideas? Thanks a lot.

can you go to fastboot and unlock it ?

the-bomber said:
can you go to fastboot and unlock it ?
Click to expand...
Click to collapse
I entered in fastboot but it says phone Locked and FRP Locked...

mihos13 said:
I entered in fastboot but it says phone Locked and FRP Locked...
Click to expand...
Click to collapse
can you try the recovery feature on Hisuite?

the-bomber said:
can you try the recovery feature on Hisuite?
Click to expand...
Click to collapse
I tried but it says "The device doesn't support for recovery".
Now what?

mihos13 said:
I tried but it says "The device doesn't support for recovery".
Now what?
Click to expand...
Click to collapse
You could use testpoint method, check guides threads! i wish you luck :fingers-crossed:

Updating to pie keeps failing *FIXED*

Tried several times to do the update through the settings menu.
Everytime it reboots the screen stays black.
I can turn it on, it vibrates for half a second. I see the Android one screen and the screen turns black. So i tried holding the volume up button and power button but no Dev menu.
So I thought it was bricked but after a few tries it rebooted and says it can't install the update.
I've attached the screenshot of the issue. I've tried it 3 times. It redownloaded the update and failed again.
Any ideas?
FIXED
 @RomLover1999: gave the tip to reboot without a sim card, and that seemed to have fixed the problem!

seend said:
Tried several times to do the update through the settings menu.
Everytime it reboots the screen stays black.
I can turn it on, it vibrates for half a second. I see the Android one screen and the screen turns black. So i tried holding the volume up button and power button but no Dev menu.
So I thought it was bricked but after a few tries it rebooted and says it can't install the update.
I've attached the screenshot of the issue. I've tried it 3 times. It redownloaded the update and failed again.
Any ideas?
Click to expand...
Click to collapse
did you tried a factory reset before updating

galardo_2 said:
did you tried a factory reset before updating
Click to expand...
Click to collapse
Nope, but just tried it and it didnt work.

Try booting without sim card

Same and via fastboot method same. Any solution? We need help its a one mi a2 more????

Unfortunately the error is not informative. I had this error when installing November update. The only way I found to see what went wrong is to check logcat during upgrade, but I think it requires root. In the end I flashed the OTA using fastboot. Still didn't get this update. Try opening shell from adb and reading logcat. I don't think anyone can help you unless we know what is 5he reason for failure

RomLover1999 said:
Try booting without sim card
Click to expand...
Click to collapse
Oh my, that worked! :highfive:
Why would something like that even work?

seend said:
Oh my, that worked! :highfive:
Why would something like that even work?
Click to expand...
Click to collapse
The november update has a bug in it that it only boots in english with a simcard inserted , other languages make the screen bug out ( at least that's what I had ) and only boot without a simcard

Worked greatly
Hey folks, just reinforcing the answer: removing the sim card before restart did the trick, the update went smooth.
Thanks @RomLover1999 and @seend

January update failed
Help! My phone is Mi A2 lite. I can't install January update. My phone is rooted and unlocked.
Thank you!

The same problem....
The same problem....anyone help?

nedjog said:
The same problem....anyone help?
Click to expand...
Click to collapse
did you unlock ? ever run TWRP/Magisk or similiar?

luminoso said:
did you unlock ? ever run TWRP/Magisk or similiar?
Click to expand...
Click to collapse
Yes..it is unlock and never use TWRP/Magisk.. any sugestion please?

nedjog said:
Yes..it is unlock and never use TWRP/Magisk.. any sugestion please?
Click to expand...
Click to collapse
I don't know, by I have the exact same issue, I've unlocked to enable camera2api and left it unlocked.
I'll take a look this weekend

luminoso said:
I don't know, by I have the exact same issue, I've unlocked to enable camera2api and left it unlocked.
I'll take a look this weekend
Click to expand...
Click to collapse
Ok, my phone is not rooted.

I was having the same issue. In the past I've unlocked in order to enable camera2api.
December/2018 (V10.0.2.0.PDIMIFJ) to January/2019 (V10.0.3.0) was failing via OTA.
This is how I solved it:
Download V10.0.2.0.PDIMIFJ dump from this thread
Reboot phone to Fastboot mode (vol down+power)
Run flash_all_except_data.sh or if you're in windowsflash_all_except_data.bat
In my case my environment is:
Linux Fedora 29
fastboot version c7815d675 from android-tools package (just make sure you have the latest fastboot)
Using original USB-C cable
After flashing and reboot the OTA update installed normally without any issues

luminoso said:
I was having the same issue. In the past I've unlocked in order to enable camera2api.
December/2018 (V10.0.2.0.PDIMIFJ) to January/2019 (V10.0.3.0) was failing via OTA.
This is how I solved it:
Download V10.0.2.0.PDIMIFJ dump from this thread
Reboot phone to Fastboot mode (vol down+power)
Run flash_all_except_data.sh or if you're in windowsflash_all_except_data.bat
In my case my environment is:
Linux Fedora 29
fastboot version c7815d675 from android-tools package (just make sure you have the latest fastboot)
Using original USB-C cable
After flashing and reboot the OTA update installed normally without any issues
Click to expand...
Click to collapse
When i try this it return me an erro rcho missmatching image and device what does it mean?
Thanks

Mr.Krulez said:
When i try this it return me an erro rcho missmatching image and device what does it mean?
Thanks
Click to expand...
Click to collapse
I´m assuming you have xiaomi a2? it must match codename "jasmine"

luminoso said:
I´m assuming you have xiaomi a2? it must match codename "jasmine"
Click to expand...
Click to collapse
fastboot does say that my product is jasmine

Hello!
I just got this phone today and tried to update (8.0 November security update) and keep getting the same error!
I've tried with and without sim card, tried with and without my google acc, and tried with full battery!
Do not really want to unlock/install rom again... Any ideas?

How to restore the sne-lx1 software

I have a problem with sne-lx1. Software has been dropped. I can enter the phone only for fastboot & rescue mode. Recovery is not working and nothing else. After running, error mode pops up. The phone has no unlocked bootloader and has frp on. How can I restore the software? The commands from fastboot are not accepted.

nicekt said:
I have a problem with sne-lx1. Software has been dropped. I can enter the phone only for fastboot & rescue mode. Recovery is not working and nothing else. After running, error mode pops up. The phone has no unlocked bootloader and has frp on. How can I restore the software? The commands from fastboot are not accepted.
Click to expand...
Click to collapse
try via hisuite if recognize it

Hisuite communicates "System Restore is not supported on this device"

nicekt said:
Hisuite communicates "System Restore is not supported on this device"
Click to expand...
Click to collapse
Then stoch frimware and dload method. I think its your best shoot.

Only method for me is work with dc unlocker.
Unlock with them bootloader and frp and then install firmware via fastboot.

mata84 said:
Only method for me is work with dc unlocker.
Unlock with them bootloader and frp and then install firmware via fastboot.
Click to expand...
Click to collapse
was it very expensive?

15euros

mata84 said:
15euros
Click to expand...
Click to collapse
what is the website you used?

I go to dc u locker site and buy there

Lock bootloader

Hello,
I spent nearly 5 hours to try to relock bootloader ( I have unlock code).
I read many thread, but I haven't found a solution yet.
I ve try to flash some img extracted from update.app but no result.
Can someone tell me if it's even possible, and if yes how?
Thanks to all.

Use adb and use fastboot relock bootloader "bootloader code"
Make sure you boot in fastboot by holding the volume down button while plugging the usb cable.

The Restless Soul said:
Use adb and use fastboot relock bootloader "bootloader code"
Make sure you boot in fastboot by holding the volume down button while plugging the usb cable.
Click to expand...
Click to collapse
Thank you for your answer, but this is the first thing i ve done. I get the error :FAILED (remote: root type is risk).
I run a stock firmware.

Kanonyx said:
Hello,
I spent nearly 5 hours to try to relock bootloader ( I have unlock code).
I read many thread, but I haven't found a solution yet.
I ve try to flash some img extracted from update.app but no result.
Can someone tell me if it's even possible, and if yes how?
Thanks to all.
Click to expand...
Click to collapse
Use usb-otg method. it'll lock your bootloader again. Just google it. It works!

Kanonyx said:
Thank you for your answer, but this is the first thing i ve done. I get the error :FAILED (remote: root type is risk).
I run a stock firmware.
Click to expand...
Click to collapse
You literally modified the system files, hence why it doesn't allow relocking. Use system recovery from Hisuite and then relock your bootloader.

The Restless Soul said:
You literally modified the system files, hence why it doesn't allow relocking. Use system recovery from Hisuite and then relock your bootloader.
Click to expand...
Click to collapse
Hisuite said that my device don't suport this recovery method.

forever_lol said:
Use usb-otg method. it'll lock your bootloader again. Just google it. It works!
Click to expand...
Click to collapse
Yes ! OTG update locked back my bootloader . ( i have used this thread https://forum.xda-developers.com/huawei-p20-pro/how-to/9-0-0-195c432e5r1p9t8-otg-t3897024 )
God bless you all for your help

[/COLOR]
Kanonyx said:
Yes ! OTG update locked back my bootloader . ( i have used this thread https://forum.xda-developers.com/huawei-p20-pro/how-to/9-0-0-195c432e5r1p9t8-otg-t3897024 )
God bless you all for your help
Click to expand...
Click to collapse
Thank You sir , glad I could help. God bless You too

Help me phone blockd on fastboot

Hello, after performing a reset to install a custom rom, my phone is blocked on Android One and Fastboot, I cannot access anything else. Each time I try a DOS command, it says "waiting for device", I tried to flash with MIFLASH without success. The drivers are installed, the bootloader was unlocked (already installed roms). The phone don't charge. What can I do? I saw the testpoint but I am not an expert in DIY ...

John974 said:
Hello, after performing a reset to install a custom rom, my phone is blocked on Android One and Fastboot, I cannot access anything else. Each time I try a DOS command, it says "waiting for device", I tried to flash with MIFLASH without success. The drivers are installed, the bootloader was unlocked (already installed roms). The phone don't charge. What can I do? I saw the testpoint but I am not an expert in DIY ...
Click to expand...
Click to collapse
I faced the same issue after a wrong flash and had to do a test point, enter EDL and reflash using miflash.
https://www.youtube.com/watch?v=n_7RVmW2Rvs
Maybe if you have good luck, you could enter EDL mode with a deep flash cable

LuuchoRocha said:
I faced the same issue after a wrong flash and had to do a test point, enter EDL and reflash using miflash.
https://www.youtube.com/watch?v=n_7RVmW2Rvs
Maybe if you have good luck, you could enter EDL mode with a deep flash cable
Click to expand...
Click to collapse
Thank you, I do the testpoint and it's ok.

John974 said:
Thank you, I do the testpoint and it's ok.
Click to expand...
Click to collapse
I hope you have been able to fix it. Let me know if you haven't being able.

LuuchoRocha said:
I hope you have been able to fix it. Let me know if you haven't being able.
Click to expand...
Click to collapse
Yes I could fix it. Thank you very much.