Database Develop

huawei p9 plus blocked on logo

sorry for my english
please help i brick my huawei p9 plus vie-l29 after try to install a new framware it is blocked on logo an can enter only to fastboot & rescue mode

Foul restart by holding down the volume button in the upper part (+). In recovery you do comes out of the 2 formats that are indicated and so you starts with the configuration of fabrica.

Grlschia said:
Foul restart by holding down the volume button in the upper part (+). In recovery you do comes out of the 2 formats that are indicated and so you starts with the configuration of fabrica.
Click to expand...
Click to collapse
sorry but the phone dont start to recovery mode it still blocked on logo and whene I press volume down boutton and plug the usb cable it enter to the fastboot & rescue mode only

laro2202 said:
sorry for my english
please help i brick my huawei p9 plus vie-l29 after try to install a new framware it is blocked on logo an can enter only to fastboot & rescue mode
Click to expand...
Click to collapse
Questions:
-How were you installing the firmware (which method)?
-What firmware were you putting in?
-What version is your phone?
-What android version did your phone had before bricking it?
I've been there with the soft brick. I got my phone back to life by downloading a ROM, putting it into the external SD Card, created a folder named 'dload' and adding the UPDATE.APP file there, then, press vol up + vol down + power and the restore started.
One thing that's worth to mention is that the phone may not boot even with this, but you just need to put the phone on erecovery ( turn it on with vol up + power ) and wipe cache + factory reset. This will bring it back to life!

jeinnerabdel said:
Questions:
-How were you installing the firmware (which method)?
-What firmware were you putting in?
-What version is your phone?
-What android version did your phone had before bricking it?
I've been there with the soft brick. I got my phone back to life by downloading a ROM, putting it into the external SD Card, created a folder named 'dload' and adding the UPDATE.APP file there, then, press vol up + vol down + power and the restore started.
One thing that's worth to mention is that the phone may not boot even with this, but you just need to put the phone on erecovery ( turn it on with vol up + power ) and wipe cache + factory reset. This will bring it back to life!
Click to expand...
Click to collapse
thank for the message
the phone is huawei P9 Plus VIE-L29 the wrong thing that I did that I flash a data file before flashing rom and the big problem that the phone enter only to the fastboot and rescue mode like the attached picture and I thing that my phone is dead now and no way to resolve this problem

Don't worry FIND THIS VIDEO in youtube Huawei Honor 7 flashing in fastboot - DC Phoenix... BUT u should payed 15 euro for using this program but it works 100 % i used it for my VIE-L29C10 this programm flashed you phone from fastboot! GOOD luck MATE

Ok, first, don't worry, this is soft brick, which means the phone will recover, it's just a matter of flashing the right rom. Follow my steps above and make sure you turn on the phone holding the 3 buttons at the same time, once the logo appears release the power button and keep both volume keys for a few seconds and release them. That's forced update mode.
The rom is about 2.8 gigabytes and must be in dload folder on the root of your external SD.
---------- Post added at 01:40 AM ---------- Previous post was at 01:38 AM ----------
PD: Don't pay for software to get the phone back! You can do it yourself!

jeinnerabdel said:
Ok, first, don't worry, this is soft brick, which means the phone will recover, it's just a matter of flashing the right rom. Follow my steps above and make sure you turn on the phone holding the 3 buttons at the same time, once the logo appears release the power button and keep both volume keys for a few seconds and release them. That's forced update mode.
The rom is about 2.8 gigabytes and must be in dload folder on the root of your external SD.
---------- Post added at 01:40 AM ---------- Previous post was at 01:38 AM ----------
PD: Don't pay for software to get the phone back! You can do it yourself!
Click to expand...
Click to collapse
yes mate u're right first of all he should try flash his cellphone 3 button method but if it's not work he should pay for this porgamm and 100 % that programm flash his phone from rescue mode

laro2202 said:
thank for the message
the phone is huawei P9 Plus VIE-L29 the wrong thing that I did that I flash a data file before flashing rom and the big problem that the phone enter only to the fastboot and rescue mode like the attached picture and I thing that my phone is dead now and no way to resolve this problem
Click to expand...
Click to collapse
mine is the same except that the FRP is Unlock
have you found a fix yet
---------- Post added at 10:18 PM ---------- Previous post was at 10:16 PM ----------
jeinnerabdel said:
Questions:
-How were you installing the firmware (which method)?
-What firmware were you putting in?
-What version is your phone?
-What android version did your phone had before bricking it?
I've been there with the soft brick. I got my phone back to life by downloading a ROM, putting it into the external SD Card, created a folder named 'dload' and adding the UPDATE.APP file there, then, press vol up + vol down + power and the restore started.
One thing that's worth to mention is that the phone may not boot even with this, but you just need to put the phone on erecovery ( turn it on with vol up + power ) and wipe cache + factory reset. This will bring it back to life!
Click to expand...
Click to collapse
Where did you find the rom to download ?

DenPim said:
yes mate u're right first of all he should try flash his cellphone 3 button method but if it's not work he should pay for this porgamm and 100 % that programm flash his phone from rescue mode
Click to expand...
Click to collapse
Just rescued my phone by using the DC Unlocker tool.....Best 15 euros I've spent

what exactly you purchased in dc unlocker? I have the same problem as you pls help..

Jpacs said:
what exactly you purchased in dc unlocker? I have the same problem as you pls help..
Click to expand...
Click to collapse
I purchased 15 credits in DC phoenix....Read the Q&A and it will help......The program let me install a firmware using fastboot

cuzovillafan said:
I purchased 15 credits in DC phoenix....Read the Q&A and it will help......The program let me install a firmware using fastboot
Click to expand...
Click to collapse
I just restored my phone but spent 30, so annoying thnx
Sent from my VIE-L29 using XDA-Developers Legacy app

Jpacs said:
I just restored my phone but spent 30, so annoying thnx
Click to expand...
Click to collapse
Have you managed to update it

laro2202 said:
sorry for my english
please help i brick my huawei p9 plus vie-l29 after try to install a new framware it is blocked on logo an can enter only to fastboot & rescue mode
Click to expand...
Click to collapse
The device loses a Recovery Stock file that must be installed
1. Download the file Recovery Open the zip file and place the file in the Minimal ADB and Fastboot program
2. Open Minimal ADB and Fastboot
3. Connect your phone to the computer
4. Type this command (fastboot flash recovery recovery.img)
5. After installing the Recovery Stock file in your mobile phone, disconnect the cable and continue pressing the stop button until it restarts and press the stop button with the volume up button until you see Recovery and load the original ROM in the SD card
I'm sorry I can not add links to my posts a few

samy5689 said:
The device loses a Recovery Stock file that must be installed
1. Download the file Recovery Open the zip file and place the file in the Minimal ADB and Fastboot program
2. Open Minimal ADB and Fastboot
3. Connect your phone to the computer
4. Type this command (fastboot flash recovery recovery.img)
5. After installing the Recovery Stock file in your mobile phone, disconnect the cable and continue pressing the stop button until it restarts and press the stop button with the volume up button until you see Recovery and load the original ROM in the SD card
I'm sorry I can not add links to my posts a few
Click to expand...
Click to collapse
No chance to work,FRP and Bootloader is locked.This only working with unlocked Bootloader to flash img Files via Fastboot
Only DC Phoenix helps
---------- Post added at 08:34 AM ---------- Previous post was at 08:29 AM ----------
Instruction here
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
This works with locked FRP and locked Bootloader.
You have 72 Hours for 15€.
Only what you need is the right Firmware(UPDATE.APP) from your Device

Huawei p9 lite 2017 bootloop

Hello, my young brother just bootlooped his new phone, he tried to root the device.
He was following this tutorial - https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
Unlocking bootloader went fine, then installing TWRP went (probably) fine, then the phone needed another factory reset. And since that moment, there is just "Your device has been unlocked..." and we can't do anything. Going to recovery is impossible. The battery is above 50% so waiting for it to go down on its own will take over a week.
We have a backup made with HiSuite.
I'm not really into huawei, so I've not a single clue what to do. Please, help us guys. Thanks in advance.

Search for firmware flashing with dload method.
Sent from my EVA-L09 using Tapatalk

I'm not any good at such things, really. I don't want to brick the phone, that's why i'm asking you for help. And your help didn't enlight anything, really. So sorry for my ignorance, but I would be greatful if you could explain it in easier way. Thanks in advance.

Just HOLD Volume Down & Power Button Together . Realese Power Button & HOLD Volume Down button when Huawei Logo Appear than You reboot to TWRP(If Install)
Just cheack TWRP installed or not

It's not installed. I have no idea how to boot into system, it just loops. I can't even enter fastboot mode.

ethernity7 said:
It's not installed. I have no idea how to boot into system, it just loops. I can't even enter fastboot mode.
Click to expand...
Click to collapse
Turn of your phone than HOLD Volume Down button than connect to usb than yout phone reboot into fastboot

That's what I try to do. Fastboot doesn't load when i hold volume down + power. I can't turn the device off because it just continously starts over and over again. The phone starts normally when battery goes down completely, system loads but then phone goes off due to lack of battery.

ethernity7 said:
That's what I try to do. Fastboot doesn't load when i hold volume down + power. I can't turn the device off because it just continously starts over and over again. The phone starts normally when battery goes down completely, system loads but then phone goes off due to lack of battery.
Click to expand...
Click to collapse
Sent me a massage after you going to Fastboot

I can't enter fastboot, it doesn't start. It just restarts and i see the screen "phone has been unlocked and can't be trusted, phone is booting..." something like that.

you cant enter fastboot, if you have not... do you even know, what you need to do, to enter fastboot? there is more than two thing to do, so, does you realy know what need to do ? call all thngs you need to do, to enter fastboot please.
got similar problems, because i instaled wrong custom recovery.
there are 2 sugestions, got in fastboot, im sure, its working if do it properly and instal proper recovery, for your model. second, use dc phoenis here
ps. why this post are in p9 not p9 lite forum?!

Well, I plug the device to PC using usb cable and when it's bootlooping I hold volume down and power button. That's how i was entering fastboot before. Now it doesn't work.
I've got stock recovery.

hold power button ~30 sec, force restart. even then nothing? well, if fastboot not working, then its gone. Ofcorse, there need to be a way, how you put on board files to work software, but im sure, thease things have only huawei.

The phone is just bootlooping, nothing else. If the battery goes down and i plug it to its charger I'm able to boot normally into the system. But once i try to turn it off it bootloops again.

ethernity7 said:
Well, I plug the device to PC using usb cable and when it's bootlooping I hold volume down and power button. That's how i was entering fastboot before. Now it doesn't work.
I've got stock recovery.
Click to expand...
Click to collapse
Turn of your phone than HOLD VOLUME DOWN & CONNECT TO USB
---------- Post added at 11:03 AM ---------- Previous post was at 11:01 AM ----------
ethernity7 said:
The phone is just bootlooping, nothing else. If the battery goes down and i plug it to its charger I'm able to boot normally into the system. But once i try to turn it off it bootloops again.
Click to expand...
Click to collapse
Sent me friend request on Facebook www.facebook.com/Rakhib.Mistry
I will tell you how to Unbrick. Don't worry i will want money from you

I can't turn it off. It automatically turns itself on and catches bootloop. I just wrote that fastboot doesn't load at all

Bricked my P20 Pro

So today I tried to Update my p20 pro with HuRupdater (link)
but unfortunately it showed me couple of errors. I tried to reboot my Phone and now I cant turn it on anymore.
Can someone help me please?

Hello! First of all, try to check if you can enter into fastboot mode or recovery.. if you can, use HI suite to recover the phone.

Horayken said:
Hello! First of all, try to check if you can enter into fastboot mode or recovery.. if you can, use HI suite to recover the phone.
Click to expand...
Click to collapse
I can´t enter fastboot or recovery. I tried every shortcut (Volume UP/Volume Down+ Power) ,but that doesn't work neither.

Have you tried erecovery ? Hold down vol+ while you plug in a power source.

Definitely eRecovery will work. That's volume up after applying power or power button. Not at same time because that'll give you normal recovery.
Try it a few times if it doesn't work first time.
It'll ask to download the full software (3GB).

xsacha said:
Definitely eRecovery will work. That's volume up after applying power or power button. Not at same time because that'll give you normal recovery.
Try it a few times if it doesn't work first time.
It'll ask to download the full software (3GB).
Click to expand...
Click to collapse
Nope that doesn't work neither. I tried it a few times. My phone is literally dead. It doesn't even vibrate when I connect it to my PC or a power source.

Preyz-z said:
Nope that doesn't work neither. I tried it a few times. My phone is literally dead. It doesn't even vibrate when I connect it to my PC or a power source.
Click to expand...
Click to collapse
That doesn't sounds too good. still nothing?? what else have you tried?

What update did you try to flash?
Sent from my Mate 10 using Tapatalk

nothing happen when you press and hold Volume Down button and plug usb to your pc and your phone? not boot into fastboot at all?

No need to pay to anyone, finally solved. Try and let me know
https://forum.xda-developers.com/huawei-p20-pro/help/p20-pro-bricked-t3868085
---------- Post added at 02:56 AM ---------- Previous post was at 02:49 AM ----------
No need to pay to anyone, finally solved. Try and let me know
https://forum.xda-developers.com/huawei-p20-pro/help/p20-pro-bricked-t3868085

Samsung Galaxy Note 9 Bootloop

hello, I have a problem with my galaxy note 9. I mistakenly started an update with a different firmware from mine (I have SM-N960F). So now it is in bootloop on the screen installing system update. If I press Power + Volume Down the phone can simulate the removal of the battery by switching off and then restarting immediately. I can not get into recovery mode nor download mode. The phone is not recognized by the PC and therefore I can not use odin. How can i do?

Hold down Bixby, volume down, and power button until you see the download screen. Then flash through proper firmware.

if I try this combination of keys the phone will reboot on the logo screen until I stop (and then go back to that of the installing system update)

cosmo.1 said:
if I try this combination of keys the phone will reboot on the logo screen until I stop (and then go back to that of the installing system update)
Click to expand...
Click to collapse
Ok. Try Bixby, Power, and Volume UP. See if you can get into recovery.

no, nothing happens..

If one wants to remove the carrier boot/flashscreen does one just flash an unbranded firmware? hate the carrier startup splash screen...

cosmo.1 said:
no, nothing happens..
Click to expand...
Click to collapse
Dang. That sounds like a hard brick to me. If you can't get into download, there's nothing you can do. Hopefully someone here can find a solution for you, but sounds like you're bricked.
---------- Post added at 08:52 PM ---------- Previous post was at 08:51 PM ----------
Jostian said:
If one wants to remove the carrier boot/flashscreen does one just flash an unbranded firmware? hate the carrier startup splash screen...
Click to expand...
Click to collapse
I think you accidentally clicked on for wrong thread. Your question has nothing to do with the OP's problem.

cosmo.1 said:
hello, I have a problem with my galaxy note 9. I mistakenly started an update with a different firmware from mine (I have SM-N960F). So now it is in bootloop on the screen installing system update. If I press Power + Volume Down the phone can simulate the removal of the battery by switching off and then restarting immediately. I can not get into recovery mode nor download mode. The phone is not recognized by the PC and therefore I can not use odin. How can i do?
Click to expand...
Click to collapse
contrary to what some might have suggested in this case dl mode can only be achieved if phone is OFF. ( on the note 9 dl mode button combo changed so... :cyclops: )
so if you cant get to recovery and select power off. let it drain out. then plug the power for 10 min to charge it. leave it powered off
then unplug. hold vol down and bixby with one hand. while holding those 2 buttons plug the usb cable from your pc.
should revive to dl mode

Mr. Orange 645 said:
Dang. That sounds like a hard brick to me. If you can't get into download, there's nothing you can do. Hopefully someone here can find a solution for you, but sounds like you're bricked.
---------- Post added at 08:52 PM ---------- Previous post was at 08:51 PM ----------
I think you accidentally clicked on for wrong thread. Your question has nothing to do with the OP's problem.
Click to expand...
Click to collapse
Yip, apologies, my bad.

bober10113 said:
contrary to what some might have suggested in this case dl mode can only be achieved if phone is off. ( on the note 9 dl mode button combo changed so... :cyclops: )
so if you cant get to recovery and select power off. Let it drain out. Then plug the power for 10 min to charge it. Leave it powered off
then unplug. Hold vol down and bixby with one hand. While holding those 2 buttons plug the usb cable from your pc.
Should revive to dl mode
Click to expand...
Click to collapse
bro you are the best.. It's work!
Love youu

cosmo.1 said:
bro you are the best.. It's work!
Love youu
Click to expand...
Click to collapse
lol ask mr orange, im actualy the worst

bober10113 said:
lol ask mr orange, in actualy the worst
Click to expand...
Click to collapse
Yes, but I celebrated too early ... now I have another problem. I downloaded a firmware from updato.com and unzipped. I assigned the entries bl ap cl and csc, and started .. now the process is started on "set partition" and on the device the horizontal bar has not loaded. now it is still .. and yet the phone has been recognized.

cosmo.1 said:
Yes, but I celebrated too early ... now I have another problem. I downloaded a firmware from updato.com and unzipped. I assigned the entries bl ap cl and csc, and started .. now the process is started on "set partition" and on the device the horizontal bar has not loaded. now it is still .. and yet the phone has been recognized.
Click to expand...
Click to collapse
you need to know what model phone you have and flash the matching firmware.(get latest)
you can also use samfirm tool to get latest firmwares.
you cant downgraded bootloader so maybe you just choose a too old of a firmware.
also be sure you use Odin v. 3.13.1
also check that you are using a good USB c cable/USB port on PC.

bober10113 said:
you need to know what model phone you have and flash the matching firmware.(get latest)
you can also use samfirm tool to get latest firmwares.
you cant downgraded bootloader so maybe you just choose a too old of a firmware.
also be sure you use Odin v. 3.13.1
also check that you are using a good USB c cable/USB port on PC.
Click to expand...
Click to collapse
Yes.. there was an error non odin 12.3
It's finally work:good:

Glad you got it working. Sorry if I steered you the wrong direction. I wasn't implying you could get to Download mode with it powered on. I assumed you were trying it with the device powered down. I should've been more clear and I almost asked you that.
Glad Bober got you up and running.

Hi all, I got a boot loop on my note 9 n960n after I was enable the "encryption"(didn't think straight..). After I pressed "reset and the phone will go to TWRP recovery but it will not allow me to stop so it just keep looping whenever I press "reset". I cannot power off the phone also. Any advise is appreciated, thanks in advance.
I solved the problem eventually..

same problem here.
wait a lot of hours battery to go down and put in download mode but now odin didn recognize it.
Any advice,please

aaatso said:
same problem here.
wait a lot of hours battery to go down and put in download mode but now odin didn recognize it.
Any advice,please
Click to expand...
Click to collapse
Have you tried:
1. Plug phone into computer, with odin running
2. Turn phone off (if bootlooping skip to next step)
3. Hold bixby and volume down buttons, then turn phone on( or wait for phone to power cycle if bootlooping)
4. You should now be in download mode

if i press power button it will stuck in installing system info again

aaatso said:
if i press power button it will stuck in installing system info again
Click to expand...
Click to collapse
seems you might not have flashed a complete firmware set ( all 4 bl ap cp and csc .md5 files. were you trying to downgrade by any chance?)
also u should state what got you in that jam in the 1st place. because just responding to an old thread dosen't give much info on your current situation.

Stuck on bootloop

Hi,
I have got a huge problem: got bootloop after flashing Havoc OS because I forgot to instal bootloop fix. But it's not the worse. I have broken volume up button so I cant go to recovery by power+volume up, and, I dont know why, after pressing power+volume down, my phone turn off and I cant even go to fastboot.
Any ideas what can I do?

Please try to press the power button for at least 10 seconds to force reboot the phone, when the MI logo shows up, press power+volume down and enter fastboot. Then connect to computer and reboot to recovery via ADB.

I did that, but the fastbot screen doesn't show up. It was like that because I had Darkness Kernel and it show always darkness theme instead of f.e. fastbot screen. But thanks for answer @andoidZhao.
Problem already solved. Thread's dead :]

Same happened with me..... my vol down button is not working.. when press vol up + power it isn't go to twrp..... Any method to flash rom while phone switch off??
---------- Post added at 06:48 AM ---------- Previous post was at 06:48 AM ----------
KojiroH said:
I did that, but the fastbot screen doesn't show up. It was like that because I had Darkness Kernel and it show always darkness theme instead of f.e. fastbot screen. But thanks for answer @andoidZhao.
Problem already solved. Thread's dead :]
Click to expand...
Click to collapse
How buddy pls tell me

Ak's World said:
Same happened with me..... my vol down button is not working.. when press vol up + power it isn't go to twrp..... Any method to flash rom while phone switch off??
---------- Post added at 06:48 AM ---------- Previous post was at 06:48 AM ----------
How buddy pls tell me
Click to expand...
Click to collapse
Sorry mate, I can't help you. I went to the recovery through the fastbot.