sorry for my english
please help i brick my huawei p9 plus vie-l29 after try to install a new framware it is blocked on logo an can enter only to fastboot & rescue mode
Foul restart by holding down the volume button in the upper part (+). In recovery you do comes out of the 2 formats that are indicated and so you starts with the configuration of fabrica.
Grlschia said:
Foul restart by holding down the volume button in the upper part (+). In recovery you do comes out of the 2 formats that are indicated and so you starts with the configuration of fabrica.
Click to expand...
Click to collapse
sorry but the phone dont start to recovery mode it still blocked on logo and whene I press volume down boutton and plug the usb cable it enter to the fastboot & rescue mode only
laro2202 said:
sorry for my english
please help i brick my huawei p9 plus vie-l29 after try to install a new framware it is blocked on logo an can enter only to fastboot & rescue mode
Click to expand...
Click to collapse
Questions:
-How were you installing the firmware (which method)?
-What firmware were you putting in?
-What version is your phone?
-What android version did your phone had before bricking it?
I've been there with the soft brick. I got my phone back to life by downloading a ROM, putting it into the external SD Card, created a folder named 'dload' and adding the UPDATE.APP file there, then, press vol up + vol down + power and the restore started.
One thing that's worth to mention is that the phone may not boot even with this, but you just need to put the phone on erecovery ( turn it on with vol up + power ) and wipe cache + factory reset. This will bring it back to life!
jeinnerabdel said:
Questions:
-How were you installing the firmware (which method)?
-What firmware were you putting in?
-What version is your phone?
-What android version did your phone had before bricking it?
I've been there with the soft brick. I got my phone back to life by downloading a ROM, putting it into the external SD Card, created a folder named 'dload' and adding the UPDATE.APP file there, then, press vol up + vol down + power and the restore started.
One thing that's worth to mention is that the phone may not boot even with this, but you just need to put the phone on erecovery ( turn it on with vol up + power ) and wipe cache + factory reset. This will bring it back to life!
Click to expand...
Click to collapse
thank for the message
the phone is huawei P9 Plus VIE-L29 the wrong thing that I did that I flash a data file before flashing rom and the big problem that the phone enter only to the fastboot and rescue mode like the attached picture and I thing that my phone is dead now and no way to resolve this problem
Don't worry FIND THIS VIDEO in youtube Huawei Honor 7 flashing in fastboot - DC Phoenix... BUT u should payed 15 euro for using this program but it works 100 % i used it for my VIE-L29C10 this programm flashed you phone from fastboot! GOOD luck MATE
Ok, first, don't worry, this is soft brick, which means the phone will recover, it's just a matter of flashing the right rom. Follow my steps above and make sure you turn on the phone holding the 3 buttons at the same time, once the logo appears release the power button and keep both volume keys for a few seconds and release them. That's forced update mode.
The rom is about 2.8 gigabytes and must be in dload folder on the root of your external SD.
---------- Post added at 01:40 AM ---------- Previous post was at 01:38 AM ----------
PD: Don't pay for software to get the phone back! You can do it yourself!
jeinnerabdel said:
Ok, first, don't worry, this is soft brick, which means the phone will recover, it's just a matter of flashing the right rom. Follow my steps above and make sure you turn on the phone holding the 3 buttons at the same time, once the logo appears release the power button and keep both volume keys for a few seconds and release them. That's forced update mode.
The rom is about 2.8 gigabytes and must be in dload folder on the root of your external SD.
---------- Post added at 01:40 AM ---------- Previous post was at 01:38 AM ----------
PD: Don't pay for software to get the phone back! You can do it yourself!
Click to expand...
Click to collapse
yes mate u're right first of all he should try flash his cellphone 3 button method but if it's not work he should pay for this porgamm and 100 % that programm flash his phone from rescue mode
laro2202 said:
thank for the message
the phone is huawei P9 Plus VIE-L29 the wrong thing that I did that I flash a data file before flashing rom and the big problem that the phone enter only to the fastboot and rescue mode like the attached picture and I thing that my phone is dead now and no way to resolve this problem
Click to expand...
Click to collapse
mine is the same except that the FRP is Unlock
have you found a fix yet
---------- Post added at 10:18 PM ---------- Previous post was at 10:16 PM ----------
jeinnerabdel said:
Questions:
-How were you installing the firmware (which method)?
-What firmware were you putting in?
-What version is your phone?
-What android version did your phone had before bricking it?
I've been there with the soft brick. I got my phone back to life by downloading a ROM, putting it into the external SD Card, created a folder named 'dload' and adding the UPDATE.APP file there, then, press vol up + vol down + power and the restore started.
One thing that's worth to mention is that the phone may not boot even with this, but you just need to put the phone on erecovery ( turn it on with vol up + power ) and wipe cache + factory reset. This will bring it back to life!
Click to expand...
Click to collapse
Where did you find the rom to download ?
DenPim said:
yes mate u're right first of all he should try flash his cellphone 3 button method but if it's not work he should pay for this porgamm and 100 % that programm flash his phone from rescue mode
Click to expand...
Click to collapse
Just rescued my phone by using the DC Unlocker tool.....Best 15 euros I've spent
what exactly you purchased in dc unlocker? I have the same problem as you pls help..
Jpacs said:
what exactly you purchased in dc unlocker? I have the same problem as you pls help..
Click to expand...
Click to collapse
I purchased 15 credits in DC phoenix....Read the Q&A and it will help......The program let me install a firmware using fastboot
cuzovillafan said:
I purchased 15 credits in DC phoenix....Read the Q&A and it will help......The program let me install a firmware using fastboot
Click to expand...
Click to collapse
I just restored my phone but spent 30, so annoying thnx
Sent from my VIE-L29 using XDA-Developers Legacy app
Jpacs said:
I just restored my phone but spent 30, so annoying thnx
Click to expand...
Click to collapse
Have you managed to update it
laro2202 said:
sorry for my english
please help i brick my huawei p9 plus vie-l29 after try to install a new framware it is blocked on logo an can enter only to fastboot & rescue mode
Click to expand...
Click to collapse
The device loses a Recovery Stock file that must be installed
1. Download the file Recovery Open the zip file and place the file in the Minimal ADB and Fastboot program
2. Open Minimal ADB and Fastboot
3. Connect your phone to the computer
4. Type this command (fastboot flash recovery recovery.img)
5. After installing the Recovery Stock file in your mobile phone, disconnect the cable and continue pressing the stop button until it restarts and press the stop button with the volume up button until you see Recovery and load the original ROM in the SD card
I'm sorry I can not add links to my posts a few
samy5689 said:
The device loses a Recovery Stock file that must be installed
1. Download the file Recovery Open the zip file and place the file in the Minimal ADB and Fastboot program
2. Open Minimal ADB and Fastboot
3. Connect your phone to the computer
4. Type this command (fastboot flash recovery recovery.img)
5. After installing the Recovery Stock file in your mobile phone, disconnect the cable and continue pressing the stop button until it restarts and press the stop button with the volume up button until you see Recovery and load the original ROM in the SD card
I'm sorry I can not add links to my posts a few
Click to expand...
Click to collapse
No chance to work,FRP and Bootloader is locked.This only working with unlocked Bootloader to flash img Files via Fastboot
Only DC Phoenix helps
---------- Post added at 08:34 AM ---------- Previous post was at 08:29 AM ----------
Instruction here
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
This works with locked FRP and locked Bootloader.
You have 72 Hours for 15€.
Only what you need is the right Firmware(UPDATE.APP) from your Device
Related
Hello everybody, I am trying to debrand my new Huawei p9. I have tried the dload method explained in the development section but I can't manage to make the upgrading start: when I press both volume buttons and turn on (with the downloaded dload folder inside the micro SD) the device simply vibrates two times and then reboot. Do you know if I am doing anything wrong or if there are other methods? Any help would be appreciated. Thanks a lot
PS: I'm sorry if I am opening a new thread but xda doesn't let me reply to the original thread because I don't have the right to post in the development section of the forum.
You must press them at the same time, turn off the device and press the vols buttons first and them the power button. The .rar/.zip must be uncompressed on the SD.
HI thank you for your help, but that is exactly what I did: unzipped the file (which contained only the dload folder) and put it in the root of the micro sd. I turned off the phone and pressed the volume buttons (up and down) together and then pressed the power button. The phone vibrated twice then the logo appeared then the screen became back and then again the logo and this loop continued until I stopped pressing the volume buttons. Anyway I don't have the phone with me now so I'll try again tomorrow. Will it work also if I put the dload folder inside the internal memory?
put file, sd card dload folder work. I dont try in internal memory.
general91 said:
HI thank you for your help, but that is exactly what I did: unzipped the file (which contained only the dload folder) and put it in the root of the micro sd. I turned off the phone and pressed the volume buttons (up and down) together and then pressed the power button. The phone vibrated twice then the logo appeared then the screen became back and then again the logo and this loop continued until I stopped pressing the volume buttons. Anyway I don't have the phone with me now so I'll try again tomorrow. Will it work also if I put the dload folder inside the internal memory?
Click to expand...
Click to collapse
only hold down the volume up and down keys with power at same time until you see the Huawei logo then let go. do not carry on holding them down - this is what was causing your phone to loop
Thanks for the help it worked! I spent so much time trying to understand what I was doing wrong while it was so simple.
general91 said:
Thanks for the help it worked! I spent so much time trying to understand what I was doing wrong while it was so simple.
Click to expand...
Click to collapse
you're welcome - often can be simple with phones, other times not so
Debrand p9 vodafone IT
Hello,
I would like to debrand my phone. I read some guide here and I will use srk tool.
Now I'm on c02b133.
Which is the correct procedure?
have I to install via dload c432b136, go to c900 and then unlock bootloader, root e oem info file?
Or have I to unlock bootloader, root, oem info file and then flash the rom c432?.
I have this doubt because in some post, someone told to reinstall stock recovery after root, and forced the installation of the stock rom..so I'm not sure about correct way.
Thank to everyone
Massimiliano
maxmax91 said:
Hello,
I would like to debrand my phone. I read some guide here and I will use srk tool.
Now I'm on c02b133.
Which is the correct procedure?
have I to install via dload c432b136, go to c900 and then unlock bootloader, root e oem info file?
Or have I to unlock bootloader, root, oem info file and then flash the rom c432?.
I have this doubt because in some post, someone told to reinstall stock recovery after root, and forced the installation of the stock rom..so I'm not sure about correct way.
Thank to everyone
Massimiliano
Click to expand...
Click to collapse
Can you share thread which you got c432? I have L09C440B138 and want to L09B432 open market nougat
HELP needed please
Tried to change my Vie -L09C02B133 to L09C432 - unlocked bootloader and rooted no probs so took the plunge and followed the video to debrand
After the first step re changing oeminfo again everything seemed to be ok however when my phone rebooted i got a red message saying that the phone had failed verification and may not work properly . It then asked for a password.
After a couple of reboots the phone came on but with no keyboard -
After another reboot i can't get past the Huawei logo ....
Any help appreciated
volume down & power gets me into fastboot & rescue mode bot not letting me connect to hisuite on my pc
have you got sd card? and have you got an adapter so you can use on pc?
ali3nfr3ak said:
have you got sd card? and have you got an adapter so you can use on pc?
Click to expand...
Click to collapse
I do have a SD card and can use it on the pc without the phone
cuzovillafan said:
I do have a SD card and can use it on the pc without the phone
Click to expand...
Click to collapse
power off phone, eject sd card place in pc copy the L09C432 firmware to dload folder ( marshmallow ) , place sd back in phone, hold down vol up + vol down + power buttom and it should flash the L09C432 fimware.
It should boot normally now
ali3nfr3ak said:
power off phone, eject sd card place in pc copy the L09C432 firmware to dload folder ( marshmallow ) , place sd back in phone, hold down vol up + vol down + power buttom and it should flash the L09C432 fimware.
It should boot normally now
Click to expand...
Click to collapse
My phone wont shut down.......I can restart it but it comes up with the verification error and then sticks on logo - ive tried to put the firmware - L09C02 into the dload on my sd card but still no luck ... was originally on L09C02 before running into probs with the debranding
Ok first thing , you have already changed oeminfo , so you can not roll back at this stage to your old firmware, u changed to L09C432 so you need to download L09C432B180 I think it is, might be B181, once you have downloaded that fimware, extract it, you should have a file called UPDATE.APP, remove sd card from phone , place in pc, create a folder called dload in root directory of sdcard, then copy update.app to that folder, only update.app, then hold down volume up + volume down + power button, after phone restarts and Huawei logo appears, release only the power button, a couple seconds later release volume buttons, maybe 5 to 10 seconds after the phone should automatically start updating
ali3nfr3ak said:
Ok first thing , you have already changed oeminfo , so you can not roll back at this stage to your old firmware, u changed to L09C432 so you need to download L09C432B180 I think it is, might be B181, once you have downloaded that fimware, extract it, you should have a file called UPDATE.APP, remove sd card from phone , place in pc, create a folder called dload in root directory of sdcard, then copy update.app to that folder, only update.app, then hold down volume up + volume down + power button, after phone restarts and Huawei logo appears, release only the power button, a couple seconds later release volume buttons, maybe 5 to 10 seconds after the phone should automatically start updating
Click to expand...
Click to collapse
I'll give this a go in the morning....Many thanks for your reply
cuzovillafan said:
I'll give this a go in the morning....Many thanks for your reply
Click to expand...
Click to collapse
Edit......No joy I'm afraid ....Phone completely discharged and when plugged in it boots up but sticks at logo again....Gonna try DC unlocked as described on another thread
cuzovillafan said:
Edit......No joy I'm afraid ....Phone completely discharged and when plugged in it boots up but sticks at logo again....Gonna try DC unlocked as described on another thread
Click to expand...
Click to collapse
YESSS. Got my phone back to L02C432B181 using the DC Unlocker tool... Everything seems fine.....Just waiting for full charge before I try the B362 update
cuzovillafan said:
YESSS. Got my phone back to L02C432B181 using the DC Unlocker tool... Everything seems fine.....Just waiting for full charge before I try the B362 update
Click to expand...
Click to collapse
nice :good:
cuzovillafan said:
YESSS. Got my phone back to L02C432B181 using the DC Unlocker tool... Everything seems fine.....Just waiting for full charge before I try the B362 update
Click to expand...
Click to collapse
My P9 Plus is similar to your phone's problem. Stuck on Huawei logo ang can access Fastboot only. How much did you pay for DC Unlocker? Thank you.
EDIT: Which "Operation name" did you select?
second_east said:
My P9 Plus is similar to your phone's problem. Stuck on Huawei logo ang can access Fastboot only. How much did you pay for DC Unlocker? Thank you.
EDIT: Which "Operation name" did you select?
Click to expand...
Click to collapse
I used DC Pheonix and i pay 15Euros
I flased B181 directly with DC Pheonix
zubyro said:
I used DC Pheonix and i pay 15Euros
I flased B181 directly with DC Pheonix
Click to expand...
Click to collapse
Same here.......Unable to get the update yet though....Well worth the spend to get phone working again
cuzovillafan said:
Same here.......Unable to get the update yet though....Well worth the spend to get phone working again
Click to expand...
Click to collapse
Tried the update again and success ??????
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
Are you on EMUI 5 (Android Nougat) ? If so, official TWRP is not compatible with version > EMUI 4.x for now.
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
ClementNerma said:
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
Click to expand...
Click to collapse
you need install original recovery and extract update.app from B100 firmware, then you place it to "dload" folder in your sd card and flash using 3 buttons. you cant full brick by messing with root. only soft brick which is fixable.
Ok I'll try it. I will post again if something comes wrong.
Thanks a lot for your help
I forgot to ask about one thing : I'm owning a phone with NEM-L51 model and I don't know if I can use NEM-L22 firmware ? If I can't, where can I find the right files to downgrade this specific model ? All the firmware files I see on the web are for the NEM-L22...
EDIT : I've found the B102 firmware for NEM-L51 model (Europe + UK) can I take it for the downgrade or is the B100 specific version needed ?
ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
gopinaidu77 said:
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
Click to expand...
Click to collapse
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears. This is really strange, when I see videos I find on YouTube all Honor 5C owners that just do what you say enter in recovery mode, but it's not my case... I really wonder why.
I don't know if that can help you to understand, but I'm using a french Honor 5C phone, with EMUI 5.0 / Android Nougat like I said previously, model is NEM-L51 and I did the Android Nougat update several days ago using the Honor's official update application, which is natively installed on the phone.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
ClementNerma said:
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
Click to expand...
Click to collapse
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
gopinaidu77 said:
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
Click to expand...
Click to collapse
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video of when I boot my phone in normal mode / recovery mode / erecovery mode ?
ClementNerma said:
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video ?
Click to expand...
Click to collapse
No i understood
gopinaidu77 said:
No i understood
Click to expand...
Click to collapse
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
EDIT : I forgot to precise the long model name of my phone : NEM-L51C432B350. On Firmware Finder Rewrite it shows that there are only two update packages for it, published on 20.04.2017... So I wonder if I need to download the three files shown in the filelist of the big update (1.68 Gb) and install them on the device ?
ClementNerma said:
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
Click to expand...
Click to collapse
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
gopinaidu77 said:
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
Click to expand...
Click to collapse
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
ClementNerma said:
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
Click to expand...
Click to collapse
Yes that's fine.
gopinaidu77 said:
Yes that's fine.
Click to expand...
Click to collapse
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
ClementNerma said:
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
Click to expand...
Click to collapse
Long click of power button will shut down the phone. Why u always refer about usb cable . Follow all instructions unplugged
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
gopinaidu77 said:
Long click of power button will shut down the phone.
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
Click to expand...
Click to collapse
Nope, long click of power button will just reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
ClementNerma said:
Nope, long click of power button will hust reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
Click to expand...
Click to collapse
Yes , the same happend for me ! U can unbrick bro
gopinaidu77 said:
Yes , the same happend for me ! U can unbrick bro
Click to expand...
Click to collapse
But how can I unbrick the phone ? I can't enter in any mode, I can't connect it to PC, I can't shutdown the phone, I can't use ADB or FastBoot on it, I can't reflash the bootloader or install a TWRP, downgrade or boot normally, I can't do anything !
So how could I unbrick it ? For now it's just still displaying "Your device is booting now..."
If you know how to do, please tell me so I can unbrick my phone. Sorry for asking you so many things I don't understand myself why there are so many problems...
Hello
I flashed the recovery and after that relock bootloder
I made a mistake in choosing a recovery
The phone stays on the boot screen ! (Tries to reset Factory)
Fastboot Not Work ! (Does not enter)
vol+ and vol- Not work (Does not enter)
My phone is brick
Sory.My english is not good
When your phone is turned off, just hold vol- and power.
It will boot into bootloader mode now and you will be able to flash the correct recovery.
Gh0st2015 said:
When your phone is turned off, just hold vol- and power.
It will boot into bootloader mode now and you will be able to flash the correct recovery.
Click to expand...
Click to collapse
Mobile will not turn off !
I'm waiting for the battery to be empty.But this did not work
Trying to recovery !(To reset Factory)
meysam007 said:
Mobile will not turn off !
I'm waiting for the battery to be empty.But this did not work
Trying to recovery !(To reset Factory)
Click to expand...
Click to collapse
phone will force reboot by pressing power 60 sec
thelous said:
phone will force reboot by pressing power 60 sec
Click to expand...
Click to collapse
Does not work
No one can help ؟
meysam007 said:
No one can help ؟
Click to expand...
Click to collapse
Hey bro, i guess you know me You need to hold Power button for 10 seconds, when screen will be black, hold Vol - and then insert your usb charger in the phone, you will be transfered to fastboot mode, and then you will be able to flash recovery aswell.
SCUZZY1337 said:
Hey bro, i guess you know me You need to hold Power button for 10 seconds, when screen will be black, hold Vol - and then insert your usb charger in the phone, you will be transfered to fastboot mode, and then you will be able to flash recovery aswell.
Click to expand...
Click to collapse
Hi my friend
Does not work
The phone is switched on automatically
Two vibrates And then gets stuck in the boot
Tries to enter the recovery,To reset factory
Is there any other way?
fastboot notwork
dlaod notwork
I installed a corrupted recovery And then I relock the boot loader
At the time of charging gets stuck in the boot
Without usb, low battery charge !!!
I have no hope:crying:
meysam007 said:
Hi my friend
Does not work
The phone is switched on automatically
Two vibrates And then gets stuck in the boot
Tries to enter the recovery,To reset factory
Is there any other way?
fastboot notwork
dlaod notwork
I installed a corrupted recovery And then I relock the boot loader
At the time of charging gets stuck in the boot
Without usb, low battery charge !!!
I have no hope:crying:
Click to expand...
Click to collapse
Flash rollback package first bro, and then try to dload 6.0 Marshmallow update.app, it will gonna work for sure, you have to find the latest Marshmallow update.
---------- Post added at 07:38 PM ---------- Previous post was at 07:35 PM ----------
meysam007 said:
Hi my friend
Does not work
The phone is switched on automatically
Two vibrates And then gets stuck in the boot
Tries to enter the recovery,To reset factory
Is there any other way?
fastboot notwork
dlaod notwork
I installed a corrupted recovery And then I relock the boot loader
At the time of charging gets stuck in the boot
Without usb, low battery charge !!!
I have no hope:crying:
Click to expand...
Click to collapse
And yeah, when you will be on Marshmallow fw, flash latest TWRP from twrp.me for Honor 5C, and then flash Elite ROM 2.0, it's stable and the best variant of all custom firmwares and ota's
SCUZZY1337 said:
Flash rollback package first bro, and then try to dload 6.0 Marshmallow update.app, it will gonna work for sure, you have to find the latest Marshmallow update.
---------- Post added at 07:38 PM ---------- Previous post was at 07:35 PM ----------
And yeah, when you will be on Marshmallow fw, flash latest TWRP from twrp.me for Honor 5C, and then flash Elite ROM 2.0, it's stable and the best variant of all custom firmwares and ota's
Click to expand...
Click to collapse
Does not work Dload
I tried many times
fast boot ,dload , usb flash
None of them work
Only the power button works
meysam007 said:
Does not work Dload
I tried many times
fast boot ,dload , usb flash
None of them work
Only the power button works
Click to expand...
Click to collapse
Bro, what is your last firmware that you had?
SCUZZY1337 said:
Bro, what is your last firmware that you had?
Click to expand...
Click to collapse
NEM-L21C432B132 android 6
I flashed the recovery android 7 and then relock bootloder
Mobile wants to go to RECOVERY
I made a mistake
meysam007 said:
NEM-L21C432B132 android 6
I flashed the recovery android 7 and then relock bootloder
Mobile wants to go to RECOVERY
I made a mistake
Click to expand...
Click to collapse
Bro, hold power button for a long time, whenever the screen will be black, hold volume - a lot and then after less then second insert usb charger(usb has to be in computer or laptop), and then unlock your bootloader again bro.
SCUZZY1337 said:
Bro, hold power button for a long time, whenever the screen will be black, hold volume - a lot and then after less then second insert usb charger(usb has to be in computer or laptop), and then unlock your bootloader again bro.
Click to expand...
Click to collapse
Does not work
Enters the boot
Just two vibes and then a logo HONOR
I'm disappointed:crying:
meysam007 said:
Does not work
Enters the boot
Just two vibes and then a logo HONOR
Click to expand...
Click to collapse
Oh my god, you have to be faster, when the phone is off, hold volume down, and then after less then second insert usb cable. You will be entered to fastboot.
SCUZZY1337 said:
Oh my god, you have to be faster, when the phone is off, hold volume down, and then after less then second insert usb cable. You will be entered to fastboot.
Click to expand...
Click to collapse
NOT WORK
Just two vibrations and then a show logo honor
There seems to be no way:crying:
meysam007 said:
NOT WORK
Just two vibrations and then a show logo honor
There seems to be no way:crying:
Click to expand...
Click to collapse
Oh my ****ing GOOOOOOD DONT ****ING HOLD POWER BUTTON
---------- Post added at 09:43 PM ---------- Previous post was at 09:42 PM ----------
meysam007 said:
NOT WORK
Just two vibrations and then a show logo honor
There seems to be no way:crying:
Click to expand...
Click to collapse
Just hold volume - without power button when phone is off, and then after that insert cable.
SCUZZY1337 said:
Oh my ****ing GOOOOOOD DONT ****ING HOLD POWER BUTTON
---------- Post added at 09:43 PM ---------- Previous post was at 09:42 PM ----------
Just hold volume - without power button when phone is off, and then after that insert cable.
Click to expand...
Click to collapse
I will take the power button for a long time ,But it is useless
it does not work
Mobile does not respond in any way
meysam007 said:
i will take the power button for a long time ,but it is useless
it does not work
Click to expand...
Click to collapse
loooooooooooooooool xdddddddddd
meysam007 said:
I will take the power button for a long time ,But it is useless
it does not work
Mobile does not respond in any way
Click to expand...
Click to collapse
You dont need to hold power button, just turn it off, hold volume down, and then less then second insert the usb cable but dont lay off the volume button untill the fastboot mode will show up.
Hi all my Huawei p8 lite fell and lcd broke, i sended it to cellphone shop to replace LCD, now if i switch my phone on it boot loop on huawei logo it switches on and of the whole time it dont want to charge allso, if i plug in charger it just go straight to huawei logo and starts looping, volume down or up or both and power button doesnt work i managed to hold down volume button and plug in usb cable then it takes me to Fastboot&Rescue mode HiSuite opens on my pc but it doesnt pick up my phone it says on the bottom of the screen PHONE UNLOCKED, any help would be greatly aprecciated
Download your phone ROM from HWFF site, copy to sd card, in bootloader ( Fastboot&Rescue mode ) Flash TWRP, boot in twrp and flash the ROM you download, in TWRP go to reboot and select recovery, you will go to default Huawei recovery then do factory reset and try to boot.
.
persona78 said:
Download your phone ROM from HWFF site, copy to sd card, in bootloader ( Fastboot&Rescue mode ) Flash TWRP, boot in twrp and flash the ROM you download, in TWRP go to reboot and select recovery, you will go to default Huawei recovery then do factory reset and try to boot.
.
Click to expand...
Click to collapse
thanks alot will try later and ask for advice if im stuck
GoldenJet said:
thanks alot will try later and ask for advice if im stuck
Click to expand...
Click to collapse
ok
persona78 said:
ok
Click to expand...
Click to collapse
where can i find the correct twrp recovery for my phone i have a P8 lite ALE L02 dual sim, dont know which chipset?
dont know if it matters but im from South Africa
GoldenJet said:
where can i find the correct twrp recovery for my phone i have a P8 lite ALE L02 dual sim, dont know which chipset?
Click to expand...
Click to collapse
if i try to flash twrp img it just say "error: cannot load recovery.img
i renamed the twrp 3.0.2 to "recovery.img"
in cmd if i type fastboot devices, it picks up my device
i followed this video tutorial https://youtu.be/UYmDBD7t1iM to try to flash the recovery img
GoldenJet said:
if i try to flash twrp img it just say "error: cannot load recovery.img
i renamed the twrp 3.0.2 to "recovery.img"
in cmd if i type fastboot devices, it picks up my device
i followed this video tutorial https://youtu.be/UYmDBD7t1iM to try to flash the recovery img
Click to expand...
Click to collapse
1º Download your ROM version from here -> http://pro-teammt.ru/firmware-database/?firmware_model=ale-l02&firmware_page=0
Full OTA means full ROM.
2º Unlock bootloader - https://forum.xda-developers.com/p8lite/general/easy-bootloader-unlock-05-09-2017-t3668586
3º Install TWRP - https://forum.xda-developers.com/p8lite/orig-development/twrp-t3609582
boot in bootloader and use ADB
command is -> fastboot flash recovery TWRP_3.1.1-0_ALICE_BL .img
4º Flash ROM zip with TWRP
5º Go to reboot and choose Recovery
6º In Default Recovery do a factory reset.
7º Try to boot.
persona78 said:
1º Download your ROM version from here -> http://pro-teammt.ru/firmware-database/?firmware_model=ale-l02&firmware_page=0
Full OTA means full ROM.
2º Unlock bootloader - https://forum.xda-developers.com/p8lite/general/easy-bootloader-unlock-05-09-2017-t3668586
3º Install TWRP - https://forum.xda-developers.com/p8lite/orig-development/twrp-t3609582
boot in bootloader and use ADB
command is -> fastboot flash recovery TWRP_3.1.1-0_ALICE_BL .img
4º Flash ROM zip with TWRP
5º Go to reboot and choose Recovery
6º In Default Recovery do a factory reset.
7º Try to boot.
Click to expand...
Click to collapse
thanks for the help i see your second option is unlock bootloader do i have to do this before flashing twrp because my phone is looping on huawei screen, i rooted a long time ago my phone and unrooted it again, on my fastboot screen it says "Phone unlocked" does it mean the bootloader is unlocked? your option 3 says boot in bootloader and use ADB if you mean by adb must i just use cmd like i did before?
GoldenJet said:
thanks for the help i see your second option is unlock bootloader do i have to do this before flashing twrp because my phone is looping on huawei screen, i rooted a long time ago my phone and unrooted it again, on my fastboot screen it says "Phone unlocked" does it mean the bootloader is unlocked? your option 3 says boot in bootloader and use ADB if you mean by adb must i just use cmd like i did before?
Click to expand...
Click to collapse
Yes that mean your device is already unlocked
Yes use "cmd" like you did before
Schubi97 said:
Yes that mean your device is already unlocked
Yes use "cmd" like you did before
Click to expand...
Click to collapse
hope it works downloading now the twrp img
GoldenJet said:
hope it works downloading now the twrp img
Click to expand...
Click to collapse
if you need further help just text me
ok the twrp img installed now how do i launch twep i tried the power and volume up button and tried volume up and down simultaneously with power button it doesnt launch twrp if i connect the usb cable it just loop on the huawei logo?
i can just hold volume down and use usb cable and launch in fastboot menu
allso tried in cmd to enter "adb reboot recovery" it says "error:device "null" not found
GoldenJet said:
ok the twrp img installed now how do i launch twep i tried the power and volume up button and tried volume up and down simultaneously with power button it doesnt launch twrp if i connect the usb cable it just loop on the huawei logo?
i can just hold volume down and use usb cable and launch in fastboot menu
Click to expand...
Click to collapse
hold up the volume up and the power button all the time till you enter twrp !
Schubi97 said:
hold up the volume up and the power button all the time till you enter twrp !
Click to expand...
Click to collapse
holded it there like 2 minutes it just loop on huawei logo its like switching on and off the whole time only if i hold volume down button it goes into fastboot menu
GoldenJet said:
holded it there like 2 minutes it just loop on huawei logo its like switching on and off the whole time only if i hold volume down button it goes into fastboot menu
Click to expand...
Click to collapse
another option would be:
Make sure you have downloaded the OTA Update Zip file
Now Rename the downloaded file to update.zip
Extract the Update.Zip file
Create a folder named Dload in the device’s internal storage or on your SD card and put the update.app (Extracted Update.zip) file there
then press the volume up & volume down & power button
then youre system should update the firmware you downloaded
src: https://rootmygalaxy.net/how-to-manually-install-ota-updates-on-huawei-devices/ ;
https://www.android-hilfe.de/forum/...izielle-huawei-firmware-anleitung.398432.html
Schubi97 said:
another option would be:
Make sure you have downloaded the OTA Update Zip file
Now Rename the downloaded file to update.zip
Extract the Update.Zip file
Create a folder named Dload in the device’s internal storage or on your SD card and put the update.app (Extracted Update.zip) file there
then press the volume up & volume down & power button
then youre system should update the firmware you downloaded
src: https://rootmygalaxy.net/how-to-manually-install-ota-updates-on-huawei-devices/ ;
https://www.android-hilfe.de/forum/...izielle-huawei-firmware-anleitung.398432.html
Click to expand...
Click to collapse
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
GoldenJet said:
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
Click to expand...
Click to collapse
Check this
https://forum.xda-developers.com/showpost.php?p=67358156&postcount=14
I noticed that model is "not the same" as our version so probably our twrp doesn't work properly, i know there is a version that probably works but i need to find it.
For now check the link above.
This is full post for your version
https://forum.xda-developers.com/p8lite/general/huawei-p8-lite-firmware-ale-l02-andriod-t3380885
.
GoldenJet said:
thanks will try the whole problem is the phone cant charge it loops the whole time on the huawei logo its the same feeling like when you press power button it gives a little vibrate then the logo shows now its doing that the whole time, the batery image allso on the phone is a red colour not a green one when charging so i have to plug the phone on usb to get it on and i dont even have to press the power button to switch it on it just goes straight to the huawei logo then it switches on and off the whole time, if i hold power button down and plug in the usb the phone wont come on if i leave the power button it goes into looping.
can it be that from a fell that the lcd broke the phone can be soft bricked cause it was still working before i took it to replace the lcd you could just see a small amount of the home screen on the lcd, im out of options this side cause even if i put the firmware on sd card its not going to work if i hold down volume buttons and power button cause phone is looping
Click to expand...
Click to collapse
Maybe they damaged your device(battery) while repairing the LCD :/
You can try thi twrp to if you want.
https://mega.nz/#!B8R0xJYb!E8Ldq5_IQ3WmztjZZ-0ykrwVawr0ArPxckAEiV7WytM
.
Schubi97 said:
Maybe they damaged your device(battery) while repairing the LCD :/
Click to expand...
Click to collapse
thanks for the info would aprecciate it if you can get me the right twrp. is that firmware you gave me the full OTA the correct one for my device? they plugged another battery on the phone when mine was out and it did the same thing looping on the huawei logo, just wondering do you call this a soft brick that i have with my phone or is it a hard brick?