Related
Hello, I will not pretend to be an expert in this area but I feel I have most of my bases covered in this case and would appreciate some help.
First, the phone,
Unlocked
M7_WLV PVT SHIP S-OFF RH
CID-11111111
HBOOT-1.56.0000
RADIO-1.13.41.0109_2
OS-3.11.605.1
The Problem:
Whenever I try to flash any custom rom (the one I want is viperone 5.8.0) the entire process goes smoothly until the last step of the installation where i get the error "set_metadata_recursive:some changes failed" I have searched around a lot but am unable to find anything
Next, Pre-reqs:
Phone obviously is unlocked S-off and supercid
TWRP 2.7.0.0 is flashed to the phone (when i try 2.6.3.3 the phone only boot loops even recovery loops)
SuperSU installed
Weaksauce installed
Usb-debugging enabled
all htc drivers installed on Pc
adb installed on pc + working
fastboot installed on pc +working
Thanks in advance for any response!!!!!!
*EDIT*
FIXED problem turned out to be the wrong TWRP for the phone, was using TWRP 2.7.0.0 and 2.7.0.4 the correct version for the verizon phone is here http://crackflasher.com/openrecovery-twrp-2-7-0-1-m7wlv-img-htc-one-verizon-openrecovery/ rom flashes working now!!!!!
PblicEnemy said:
Whenever I try to flash any custom rom (the one I want is viperone 5.8.0) the entire process goes smoothly until the last step of the installation where i get the error "set_metadata_recursive:some changes failed" I have searched around a lot but am unable to find anything
Click to expand...
Click to collapse
First, I would try formatting (not wiping) your /system partition right before the install. If that fails, try following the advice in this thread, which sounds like a dead ringer for your problem:
http://forum.xda-developers.com/showthread.php?t=2532300
Note: Please post whether formatting /system is successful, so others can see the fact in their search results.
fenstre said:
First, I would try formatting (not wiping) your /system partition right before the install. If that fails, try following the advice in this thread, which sounds like a dead ringer for your problem:
http://forum.xda-developers.com/showthread.php?t=2532300
Note: Please post whether formatting /system is successful, so others can see the fact in their search results.
Click to expand...
Click to collapse
Hello, and thanks for the response, do you know of any guides to formatting my /system partition, and will this mean risking the backup i have saved through TWRP? Also I saw that thread that you posted earlier while researching but I don't understand if it is for my phone or compatible with the rom I'm trying to flash.
PblicEnemy said:
Hello, and thanks for the response, do you know of any guides to formatting my /system partition, and will this mean risking the backup i have saved through TWRP? Also I saw that thread that you posted earlier while researching but I don't understand if it is for my phone or compatible with the rom I'm trying to flash.
Click to expand...
Click to collapse
I believe it's an option under the advanced section of "wipe" in TWRP. And this won't risk your backups, because they're stored on another partition. Don't wipe or format anything except /system. And the file recommended in that article isn't likely to cause harm--I believe it's just a helper for how to perform the commands that are needed to install a ROM (for example, delete the files "system/*"). It's more likely to not work than to harm your phone, and there's no way it could install a ROM correctly, then prevent that ROM from running.
fenstre said:
I believe it's an option under the advanced section of "wipe" in TWRP. And this won't risk your backups, because they're stored on another partition. Don't wipe or format anything except /system. And the file recommended in that article isn't likely to cause harm--I believe it's just a helper for how to perform the commands that are needed to install a ROM (for example, delete the files "system/*"). It's more likely to not work than to harm your phone, and there's no way it could install a ROM correctly, then prevent that ROM from running.
Click to expand...
Click to collapse
Okay I believe I am doing something wrong because I downloaded the .zip file for that binary update that was mentioned in that thread. I extracted the file and also extracted the Rom file, I put the new binary into the extracted rom and removed the old one, then i re-zipped the new rom file, however the phone will no longer install, it doesn't even make it to the install screen. Is this because it needs to be recompiled after I change the binary update? If so how do I go about compiling?
PblicEnemy said:
Hello, I will not pretend to be an expert in this area but I feel I have most of my bases covered in this case and would appreciate some help.
First, the phone,
Unlocked
M7_WLV PVT SHIP S-OFF RH
CID-11111111
HBOOT-1.56.0000
RADIO-1.13.41.0109_2
OS-3.11.605.1
The Problem:
Whenever I try to flash any custom rom (the one I want is viperone 5.8.0) the entire process goes smoothly until the last step of the installation where i get the error "set_metadata_recursive:some changes failed" I have searched around a lot but am unable to find anything
Next, Pre-reqs:
Phone obviously is unlocked S-off and supercid
TWRP 2.7.0.0 is flashed to the phone (when i try 2.6.3.3 the phone only boot loops even recovery loops)
SuperSU installed
Weaksauce installed
Usb-debugging enabled
all htc drivers installed on Pc
adb installed on pc + working
fastboot installed on pc +working
Thanks in advance for any response!!!!!!
Click to expand...
Click to collapse
PblicEnemy said:
Okay I believe I am doing something wrong because I downloaded the .zip file for that binary update that was mentioned in that thread. I extracted the file and also extracted the Rom file, I put the new binary into the extracted rom and removed the old one, then i re-zipped the new rom file, however the phone will no longer install, it doesn't even make it to the install screen. Is this because it needs to be recompiled after I change the binary update? If so how do I go about compiling?
Click to expand...
Click to collapse
BRICK ALERT: A word of CAUTION!! are you using m7_u/ul recoveries, from the version numbers sound like m7_u/ul versions... you have m7_wlv so you need to flash a recovery compatible with that phone!
nkk71 said:
BRICK ALERT: A word of CAUTION!! are you using m7_u/ul recoveries, from the version numbers sound like m7_u/ul versions... you have m7_wlv so you need to flash a recovery compatible with that phone!
Click to expand...
Click to collapse
Someone sent me M7vzw-twrp_2.7.0.4b-santod_recovery, and that is the one I am using at the moment, is that wrong?
nkk71 said:
BRICK ALERT: A word of CAUTION!! are you using m7_u/ul recoveries, from the version numbers sound like m7_u/ul versions... you have m7_wlv so you need to flash a recovery compatible with that phone!
Click to expand...
Click to collapse
Sorry for double post, but you pointed out the solution and the phone is working correctly!
PblicEnemy said:
Sorry for double post, but you pointed out the solution and the phone is working correctly!
Click to expand...
Click to collapse
well hope all is well now, and also make sure to flash ROMs which are compatible!
most users (including myself are on m7_u/ul) and this could be easily overlooked...
Good luck and enjoy
Hey guys, I was playing around with the leeco s3 and I think I over flashed something or other. It's not exactly working right. Can someone please upload a complete btwrp backup of their le s3 x522 on 18s, 19s or 20s?
Thanks in advance!
Rico
iamrico00 said:
Hey guys, I was playing around with the leeco s3 and I think I over flashed something or other. It's not exactly working right. Can someone please upload a complete btwrp backup of their le s3 x522 on 18s, 19s or 20s?
Thanks in advance!
Rico
Click to expand...
Click to collapse
I think you need to start reading some threads around here, once you have installed the TWRP for the S3, you cannot get OTA to work again and their are other numerous issues too, as of yet nobody can fully restore back to stock. So start reading.
Also a few people here do have flashable firmware that might help but it will never be a full stock recovery unless something is fixed.
Charles Broccoli said:
I think you need to start reading some threads around here, once you have installed the TWRP for the S3, you cannot get OTA to work again and their are other numerous issues too, as of yet nobody can fully restore back to stock. So start reading.
Also a few people here do have flashable firmware that might help but it will never be a full stock recovery unless something is fixed.
Click to expand...
Click to collapse
I think you need to CAREFULLY read this thread before thinking of writing something.
I did not ask for OTA updates. I did not ask for stock. I asked for a functioning TWRP backup of the Le S3. Thats it.
Rico
Please play nice ppl
Deleted
iamrico00 said:
Hey guys, I was playing around with the leeco s3 and I think I over flashed something or other. It's not exactly working right. Can someone please upload a complete btwrp backup of their le s3 x522 on 18s, 19s or 20s?
Thanks in advance!
Rico
Click to expand...
Click to collapse
take a look in this thread, you will find a link..i think page 3/4 Extreme99 wrote some dirctions...it has a link to his twrp 19s backup which i know works
Need x522 stock .019s rom. Lost IMEI, baseband, etc.
britdude said:
take a look in this thread, you will find a link..i think page 3/4 Extreme99 wrote some dirctions...it has a link to his twrp 19s backup which i know works
Need x522 stock .019s rom. Lost IMEI, baseband, etc.
Click to expand...
Click to collapse
Thanks, Ive seen this post as well, it is 19s but is the boot partition (i think) and data partition, no recovery or system partition.
I was curious if anyone had a complete backup of working system, recovery, boot, data partitions for restoring?
Also I get this odd error 7 when trying to restore it, anyone know what is going on?
Thanks
Rico
iamrico00 said:
Thanks, Ive seen this post as well, it is 19s but is the boot partition (i think) and data partition, no recovery or system partition.
I was curious if anyone had a complete backup of working system, recovery, boot, data partitions for restoring?
Also I get this odd error 7 when trying to restore it, anyone know what is going on?
Thanks
Rico
Click to expand...
Click to collapse
the post i sent you too, and the twrp back up in there at step 6 is all you need to restore your system to 19s..
it will not give you an error, but make sure you are using the chinese twrp
the error is what you are getting trying to flash the OTA thru twrp...dont worry about it as the OTA's will not install
Official twrp work too... Just ota fuxed
---------- Post added at 06:04 PM ---------- Previous post was at 05:43 PM ----------
Also i noticed for le s3, the update is 5.8.020s instead of the 5.9.020s that's available for the chinese le 2
britdude said:
the post i sent you too, and the twrp back up in there at step 6 is all you need to restore your system to 19s..
it will not give you an error, but make sure you are using the chinese twrp
the error is what you are getting trying to flash the OTA thru twrp...dont worry about it as the OTA's will not install
Click to expand...
Click to collapse
Thanks, I thats one I tried, I get the OS and it boots ok. Phones ok, but bluetooth and wifi cashes a crash.
Any ideas?
Thanks
Rico
iamrico00 said:
Thanks, I thats one I tried, I get the OS and it boots ok. Phones ok, but bluetooth and wifi cashes a crash.
Any ideas?
Thanks
Rico
Click to expand...
Click to collapse
I've used that twrp baclup numerous times without a problem.....
i would suggest, going back to twrp, and erase data, then restore again and see what happens
Good news guys! I was able to get the official le s3 from leeco directly!! I will upload it soon, it is 5.8.020s.
xterminater07 said:
Good news guys! I was able to get the official le s3 from leeco directly!! I will upload it soon, it is 5.8.020s.
Click to expand...
Click to collapse
Full? How can we flash it?
Posted using a calculator and delayed by AT&T.
jose makalolot said:
Full? How can we flash it?
Posted using a calculator and delayed by AT&T.
Click to expand...
Click to collapse
go to this link and have a look..
It's done thru TWRP
http://forum.xda-developers.com/le-2/development/le-s3-factory-image-5-8-020s-directly-t3527790
britdude said:
go to this link and have a look..
It's done thru TWRP
http://forum.xda-developers.com/le-2/development/le-s3-factory-image-5-8-020s-directly-t3527790
Click to expand...
Click to collapse
You tried that way?
Posted using a calculator and delayed by AT&T.
jose makalolot said:
You tried that way?
Posted using a calculator and delayed by AT&T.
Click to expand...
Click to collapse
yes i have tried that way, i have also tried it a diff way if you read down a few comments...
its on my phone running smooth which ever way you go...its all good
xterminator07 has worked hard at getting this full rom file for us..
please thank him
britdude said:
the post i sent you too, and the twrp back up in there at step 6 is all you need to restore your system to 19s..
it will not give you an error, but make sure you are using the chinese twrp
the error is what you are getting trying to flash the OTA thru twrp...dont worry about it as the OTA's will not install
Click to expand...
Click to collapse
Hey, do you know where I could find the Chinese TWRP that allows me to flash the original stock EUI rom? I flashed LineageOS but the camera is not perfect, so I wish to go back to EUI but I cannot figure out how to install it without seeing errors such as "this package is for "le_s2_na" devices. Your device is a "s2"." Could you point me in the right direction? Maybe a download link for the Chinese TWRP that people claim works? Thanks!
potatoalien said:
Hey, do you know where I could find the Chinese TWRP that allows me to flash the original stock EUI rom? I flashed LineageOS but the camera is not perfect, so I wish to go back to EUI but I cannot figure out how to install it without seeing errors such as "this package is for "le_s2_na" devices. Your device is a "s2"." Could you point me in the right direction? Maybe a download link for the Chinese TWRP that people claim works? Thanks!
Click to expand...
Click to collapse
You need to unzip the firmware file, remove top 2 lines from META-INF\com\google\android\updater-script and zip it again, it will remove the platform check. However device still does not boot, I tried to install both 20S and 21S multiple times. My guess is we need the original recovery partition image for X522 and I could not find it anywhere.
I resolved it. Took 2 days and dozens of flashes. As far as I can tell the key was to wipe everything - system, cache, data, internal storage, then reboot into bootloader again and into Chinese TWRP.
So the process would be:
1. power off the phone. Hold VolumeDown button and power on. It loads into bootloader.
2. fastboot oem unlock-go
3. fastboot boot twrp.img.
4. In TWRP wipe EVERYTHING
5. In TWRP reboot -> bootloader.
6. repeat 2-3.
7. On PC: adb push S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip /sdcard
8. In TWRP click right button on the bottom and select English. Click "Do not allow modifications." Install the zip file you just uploaded.
9. Reboot.
virx14 said:
I resolved it. Took 2 days and dozens of flashes. As far as I can tell the key was to wipe everything - system, cache, data, internal storage, then reboot into bootloader again and into Chinese TWRP.
So the process would be:
1. power off the phone. Hold VolumeDown button and power on. It loads into bootloader.
2. fastboot oem unlock-go
3. fastboot boot twrp.img.
4. In TWRP wipe EVERYTHING
5. In TWRP reboot -> bootloader.
6. repeat 2-3.
7. On PC: adb push S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip /sdcard
8. In TWRP click right button on the bottom and select English. Click "Do not allow modifications." Install the zip file you just uploaded.
9. Reboot.
Click to expand...
Click to collapse
Hmm I might try that later, but what would I do if I get the classical error ("this package is for "le_s2_na" devices")? Will that error not show up if I follow your method?
my mobile is che2-l11 marshmello and rooted with magisk then i separated sd card to ext4 and exfat then download app2sd the problem and the fault is that i link system apps to externel so it restart alone and then go to stuck at honor logo only pls anyone have an idea assist me
Kireto00 said:
my mobile is che2-l11 marshmello and rooted with magisk then i separated sd card to ext4 and exfat then download app2sd the problem and the fault is that i link system apps to externel so it restart alone and then go to stuck at honor logo only pls anyone have an idea assist me
Click to expand...
Click to collapse
It might be best to re-install your firmware. Also why did you linked system apps?
Your explanation is bit difficult to understand, could you maybe give a more detailed explanation or would you want step by step guide to help you with rooting and configurating apps2sd? You seem to be having lot of problems with getting apps2sd working as wanted.
keikari said:
It might be best to re-install your firmware. Also why did you linked system apps?
Your explanation is bit difficult to understand, could you maybe give a more detailed explanation or would you want step by step guide to help you with rooting and configurating apps2sd? You seem to be having lot of problems with getting apps2sd working as wanted.
Click to expand...
Click to collapse
i am already rooted and have twrp working and i wipe every thing as u say then i do all ur replys but it not working but i do all with marshmello update.app only might i try with kitkat ?? thait marshmello might be corrupt as u say ??
Kireto00 said:
i am already rooted and have twrp working and i wipe every thing as u say then i do all ur replys but it not working but i do all with marshmello update.app only might i try with kitkat ?? thait marshmello might be corrupt as u say ??
Click to expand...
Click to collapse
To get past honor logo you need to re-install whole firmware, because most likely system partition has something that prevents boot or boot partition has problem.
I'm using marsmallow and Apps2SD works normally for me. I don't think it matters which version you are using, but getting back to kitkat might be difficult.
keikari said:
To get past honor logo you need to re-install whole firmware, because most likely system partition has something that prevents boot or boot partition has problem.
I'm using marsmallow and Apps2SD works normally for me. I don't think it matters which version you are using, but getting back to kitkat might be difficult.
Click to expand...
Click to collapse
u can tell me what i must do now and i will do ........ but i wipe all thing on sd card and system its say no os found as no system found so what i do i think kitkat it will not be difficult because as no system is in software
Kireto00 said:
u can tell me what i must do now and i will do ........ but i wipe all thing on sd card and system its say no os found as no system found so what i do i think kitkat it will not be difficult because as no system is in software
Click to expand...
Click to collapse
I've read from somewhere that it isn't as easy as it looks like(though I haven't tested it myself). I think it's because there are partitions which you can't flash in fastboot and the "updateflasher.zip" thread says that method only works on android LP and MM.
I can guide you with apps2sd, but if you root with magisk I can't help if problem is somehow related to it since I have never used it.
keikari said:
I've read from somewhere that it isn't as easy as it looks like(though I haven't tested it myself). I think it's because there are partitions which you can't flash in fastboot and the "updateflasher.zip" thread says that method only works on android LP and MM.
I can guide you with apps2sd, but if you root with magisk I can't help if problem is somehow related to it since I have never used it.
Click to expand...
Click to collapse
u mean that u dont know what to do now ??
Kireto00 said:
u mean that u dont know what to do now ??
Click to expand...
Click to collapse
No, I meant to say that you should install firmware you want, and any root method you want. And then your device should boot normally.
keikari said:
No, I meant to say that you should install firmware you want, and any root method you want. And then your device should boot normally.
Click to expand...
Click to collapse
ok i need the method ??
Kireto00 said:
ok i need the method ??
Click to expand...
Click to collapse
Well I prefer this method https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 chapter 8 is rootin.
Actually needed steps are:
1. Flash 1.zip
2. Flash SuperSu.zip can be found from here https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
3. Make sure it says "installing mode system-less" or something similiar.
4. Reboot your phone. It will boot loop once or twice and then works normally.
Then I can help you with apps2sd if you still want.
keikari said:
Well I prefer this method https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 chapter 8 is rootin.
Actually needed steps are:
1. Flash 1.zip
2. Flash SuperSu.zip can be found from here https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
3. Make sure it says "installing mode system-less" or something similiar.
4. Reboot your phone. It will boot loop once or twice and then works normally.
Then I can help you with apps2sd if you still want.
Click to expand...
Click to collapse
i am honor 4x this is the first then there is no system for my device i delete it its says no os installed when i boot so i need a method to instal a new frimware not rooting it
Kireto00 said:
i am honor 4x this is the first then there is no system for my device i delete it its says no os installed when i boot so i need a method to instal a new frimware not rooting it
Click to expand...
Click to collapse
Oh my bad I thought you already knew about this but here https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
You can also use it to install p8lite rom which has EMUI 4.1 if you want. Though you can't use OTG feature then. There seems to be fix posted for it, but it didn't work for me.
keikari said:
Oh my bad I thought you already knew about this but here https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
You can also use it to install p8lite rom which has EMUI 4.1 if you want. Though you can't use OTG feature then. There seems to be fix posted for it, but it didn't work for me.
Click to expand...
Click to collapse
i use this method for marshmello and dont work
Kireto00 said:
i use this method for marshmello and dont work
Click to expand...
Click to collapse
Can you tell exactly what you did, also which firmware you are installing like b310 or b360. And what error did it gave you. I've used this method a lot to fix my phone when done something wrong and always worked without problem.
keikari said:
Can you tell exactly what you did, also which firmware you are installing like b310 or b360. And what error did it gave you. I've used this method a lot to fix my phone when done something wrong and always worked without problem.
Click to expand...
Click to collapse
ok now i separate my sd card as well known then i link system apps so when i restart there is no system to boot to it so it stuck at honor logo so i want a method in a step by step to repair it....the error is
E: could not extract ' meta.inf /com/google/android /update-binary
error installing zip file '/externel -sd / lost.dir / meta.inf zip
with red colour
my base is marshmello
Kireto00 said:
ok now i separate my sd card as well known then i link system apps so when i restart there is no system to boot to it so it stuck at honor logo so i want a method in a step by step to repair it....the error is
E: could not extract ' meta.inf /com/google/android /update-binary
error installing zip file '/externel -sd / lost.dir / meta.inf zip
with red colour
my base is marshmello
Click to expand...
Click to collapse
Can you give link to where you downloaded your firmware and which version it was? This is very weird because no one else hasn't has problem like that.
keikari said:
Can you give link to where you downloaded your firmware and which version it was? This is very weird because no one else hasn't has problem like that.
Click to expand...
Click to collapse
the problem he got because the meta-inf folder is corrupt.]
miststudent2011 said:
the problem he got because the meta-inf folder is corrupt.
Click to expand...
Click to collapse
I guess he should then try to re-download updateflasher.zip. Right?
keikari said:
I guess he should then try to re-download updateflasher.zip. Right?
Click to expand...
Click to collapse
Yes he should do it.
He was having unstable internet connection previously while he requested my help.
@Kireto00
redownload the zip file from the link i provided now and repeat the process ie.., unpacking and repacking the two zip files and give a try.
I strongly believe that either the zip downloaded is corrupt or while rezipping the file you might have faced the error.
my one plus 3t is bricked unbricked using msmtool but now i cant install or update the ROM into it.. please help me can someone help me using team viewer please or a remote might also help me.. please help me no wifi and bluetooth too as of now.
avnash09 said:
my one plus 3t is bricked unbricked using msmtool but now i cant install or update the ROM into it.. please help me can someone help me using team viewer please or a remote might also help me.. please help me no wifi and bluetooth too as of now.
Click to expand...
Click to collapse
not even a single reply.. this is not the way to treat a new member thanq
avnash09 said:
not even a single reply.. this is not the way to treat a new member thanq
Click to expand...
Click to collapse
There are a couple of reasons for people not replying.
First of all, the lack of details on your problem makes it impossible to determine the solution.
1. What do you mean bricked? Bootloop? Stuck on OnePlus logo? Hard brick? How did you get it bricked in the first place?
2. The restore tool removes TWRP. Have you installed it again?
3. What do you mean you can't install or the update the ROM? Is there an error message? Are you trying to flash a custom ROM in the stock recovery?
4. You waited less than 2 hours. You realize there are different time zones? Some people are sleeping, others are at work.
ast00 said:
There are a couple of reasons for people not replying.
First of all, the lack of details on your problem makes it impossible to determine the solution.
1. What do you mean bricked? Bootloop? Stuck on OnePlus logo? Hard brick? How did you get it bricked in the first place?
2. The restore tool removes TWRP. Have you installed it again?
3. What do you mean you can't install or the update the ROM? Is there an error message? Are you trying to flash a custom ROM in the stock recovery?
4. You waited less than 2 hours. You realize there are different time zones? Some people are sleeping, others are at work.
Click to expand...
Click to collapse
hi ,
i am a newbie here . my phone gets heated up after the ota install of 4.1.6 so i thought of factory resetting it. after resetting it. it got struck on the one plus logo and started booting again and again. so one of my friend asked to check the forum and i used [UNBRICK] Unbrick Tutorial For The OnePlus 3T!!!!!!!!! by Haris K. from the forum. it installed the os sucessfully. but i couldnt find wifi and bluetooth buttons enabled. so i thought of installing new roms but it gets struck on the one plus logo.. please help me. thanks in advance
avnash09 said:
not even a single reply.. this is not the way to treat a new member thanq
Click to expand...
Click to collapse
Hey you self-entitled prick, transfer a copy of the full ROM onto your phone through adb/USB OTG/MTP and flash it through the stock recovery. If you had previously unlocked your bootloader and have TWRP installed, use that to flash instead. If you do not know what any of the above means, look for it yourself through the forums.
Anova's Origin said:
Hey you self-entitled prick, transfer a copy of the full ROM onto your phone through adb/USB OTG/MTP and flash it through the stock recovery. If you had previously unlocked your bootloader and have TWRP installed, use that to flash instead. If you do not know what any of the above means, look for it yourself through the forums.
Click to expand...
Click to collapse
after flashing the rom i am getting a message decryprtion unsuccessful. the password is correct but the data is corrupt how to bypass this message
avnash09 said:
after flashing the rom i am getting a message decryprtion unsuccessful. the password is correct but the data is corrupt how to bypass this message
Click to expand...
Click to collapse
Get into the stock recovery and wipe both cache and userdata partitions before proceeding to troubleshoot further.
fareed_xtreme said:
Get into the stock recovery and wipe both cache and userdata partitions before proceeding to troubleshoot further.
Click to expand...
Click to collapse
after doing so my OS has started but wifi and bluetooth are greyed out. persist folder cannot find any data
.bt_nv.bin
WCNSS_qcom_wlan_nv.bin
WCNSS_qcom_wlan_nv_calibration_persist.bin
WCNSS_qcom_wlan_nv_regulatory_persist.bin
no file exists .. is the answer i get
avnash09 said:
after doing so my OS has started but wifi and bluetooth are greyed out. persist folder cannot find any data
.bt_nv.bin
WCNSS_qcom_wlan_nv.bin
WCNSS_qcom_wlan_nv_calibration_persist.bin
WCNSS_qcom_wlan_nv_regulatory_persist.bin
no file exists .. is the answer i get
Click to expand...
Click to collapse
Reflash with the MSMtool after re-downloading everything and verifying all downloads first before proceeding. Use the tool I have posted at https://forum.xda-developers.com/oneplus-3t/how-to/guide-official-op3t-stock-reset-to-oos-t3598864
Ensure you verify before starting the flash. Also uninstall or deactivate any anti virus application installed on your PC.
should i change the data partitions and everything to f2fs or other thing. system to ext4 data to f2fs
For now, don't worry about the data partitions. As mentioned above, reflash from MSMTools, verify the downloaded package first, and then check. All your issues are probably caused by a bad file.
Guys, I decided to install custom firmware, but I met a bunch of problems.
I chose this recovery https://4pda.ru/pages/go/?u=https:/...4690/fsdownload/krdcaHlb9/TWRP_A30&e=94266802 and installed it through One, the recovery is loading, everything is fine. Then I decided to install Lineage OS 17.1 (https://w3bsit3-dns.com.ru/forum/index.php?showtopic=948701&view=findpost&p=90491345), BUT after a successful installation of the image it loads me into recovery again, and in the reboot section it says "no os installed ". At the moment, I can’t install any os - he writes that it is successful but eventually reboots into recovery. I will be glad to any help or advice.
dude same here , i tried flashing arrowOS and pixel EXperience but no OS installed shown ..i think its because TWRP doesn't support on android 10 cause on TWRP you can't change the option "mount system as read". this one is the first problem and there are so many else...
i tried many options, flashing new TWRP as well but RIP.
Yeah, i found it out too. Ive flashed stock through odin and this works fine. Now will search for the right recovery. Maybe somebody leave link here
I found temporary solution.https://4pda.ru/forum/dl/post/18912044/twrp_for_andr.10.tar
You should flash it in odin like usual twrp, then format data, reboot to recovery and flash magisk debug(https://4pda.ru/forum/dl/post/18911692/magisk-debug.zip) . Works fine.
And you must be registred to be allowed to download from there else you get an error
NegilisticBluesman said:
I found temporary solution.https://4pda.ru/forum/dl/post/18912044/twrp_for_andr.10.tar
You should flash it in odin like usual twrp, then format data, reboot to recovery and flash magisk debug(https://4pda.ru/forum/dl/post/18911692/magisk-debug.zip) . Works fine.
And you must be registred to be allowed to download from there else you get an error
Click to expand...
Click to collapse
dude first link is giving me errors....can you plz share an updated link, i too want to flash custom ROM
btw which custom ROM are u using, i heard pixel Experience and Lineage OS are some good ones.
luke martinez said:
dude first link is giving me errors....can you plz share an updated link, i too want to flash custom ROM
btw which custom ROM are u using, i heard pixel Experience and Lineage OS are some good ones.
Click to expand...
Click to collapse
https://4pda.ru/forum/index.php?showtopic=948701&view=findpost&p=94153866
Im using Lineage os 17.1, there are two bugs: mtp(but in twrp it works) and when u are using bluetooth headset incoming call's sound will go through speaker
NegilisticBluesman said:
https://4pda.ru/forum/index.php?showtopic=948701&view=findpost&p=94153866
Im using Lineage os 17.1, there are two bugs: mtp(but in twrp it works) and when u are using bluetooth headset incoming call's sound will go through speaker
Click to expand...
Click to collapse
hey man, its again giving me download error :crying::crying:can you give me another download link to TWRP for Andriod 10?? Thanks
btw system partition type for GSi rom - A or A/B ??:fingers-crossed:
You must be registred at this forum or u wont be allowed to download. A or A/B? I dont know about this.
NegilisticBluesman said:
You must be registred at this forum or u wont be allowed to download. A or A/B? I dont know about this.
Click to expand...
Click to collapse
sorry i don't know russian..can you please upload that TWRP to google drive or any other site
Hey bro help me by uploading twrp here.
Forum is completely russian and moreover i can't make account or download anything cause even CAPTCHA are in Russian language.
EDIT: IGNORE IT ,I MADE AN ACCOUNT SOMEHOW!!! THANKS FOR NOT REALLY HELPING ME FOR ASKING FOR SO LONG!:highfive:
luke martinez said:
Hey bro help me by uploading twrp here.
Forum is completely russian and moreover i can't make account or download anything cause even CAPTCHA are in Russian language.
EDIT: IGNORE IT ,I MADE AN ACCOUNT SOMEHOW!!! THANKS FOR NOT REALLY HELPING ME FOR ASKING FOR SO LONG!:highfive:
Click to expand...
Click to collapse
if u still need here is completly working twrp for samsung a30: https://drive.google.com/file/d/1fnXYqD_lyogDbjx9MnJ51cM2PmMoImc4/view?usp=sharing:highfive: