Related
When I try to unlock bootloader for my device p9 I show error remote not completely ???
I have number to activate .
Enable Developer Mode(Go to Settings >About Phone>Press Build Number until a message said the developer mode is activated) then Settings>Developer Mode>Activated OEM Unlock & Activated USB Debugging. Now you should be able to unlock the bootloader.
thank it is OK but rest factory all my data it is delete oooohhhhhh nooooooo :crying::crying::crying:
ameer1982 said:
thank it is OK but rest factory all my data it is delete oooohhhhhh nooooooo :crying::crying::crying:
Click to expand...
Click to collapse
Come on.
You will not be able to unlock your bootloader once you forgot to enable the OEM.
If your stock recovery is intact you can use the force update "dload"
If it does not work, it is because your stock recovery is corrupted or has been replaced in this case your only option is DC Phoenix.
You need 15 credits if you do not have a Dongle, you will receive a username and password. DC Phoenix allows you to flash the UPDATE.APP even with the bootloader and FRP is locked.
Fastboot mode.
Good luck!
hello,
It's worst scenario I could imagine, My sisters Xperia Z1 dropped on street floor and crashed almost 70% of the screen,
touch is working on the remain area, she left the device for a while, and now she need some contacts, sms, pics from it, she forgot the pattern, and forgot the google mail associated !!.
I tried many ways described in many sites to remove the pattern without removing stored data, but the way ends at USB debugging OFF on the device,
please any one can lead my to how to unlock it ?
and in worst case if we can reset the device totally , how to do that? and can we use some app to recover data?
any help would be so appreciated.
thanks
A.H.A
engali555 said:
hello,
It's worst scenario I could imagine, My sisters Xperia Z1 dropped on street floor and crashed almost 70% of the screen,
touch is working on the remain area, she left the device for a while, and now she need some contacts, sms, pics from it, she forgot the pattern, and forgot the google mail associated !!.
I tried many ways described in many sites to remove the pattern without removing stored data, but the way ends at USB debugging OFF on the device,
please any one can lead my to how to unlock it ?
and in worst case if we can reset the device totally , how to do that? and can we use some app to recover data?
any help would be so appreciated.
thanks
A.H.A
Click to expand...
Click to collapse
If she has recovery, you should be able to start recovery and from there you can connect the phone to computer and have access to internal card. If there is no recovery and bootloader is unlocked, fastboot TWRP and do the same. If bootloader is locked, and there is a google account prompt, I doubt you'd be able to get to data. But google the options...
Hello,
I'm Afraid there is no recovery available ,
as I check about fastboot TWRP recovery, it needs first the device to be rooted and "Enabled USB debugging " ; means need the device to be opened and rooted and Enabled USB debugging !.
any idea please ?
unlock bootloader using fastboot mode via flashtool, then fastboot flash twrp.
then boot into recovery and attach your device to pc.
links that might help are below
twrp recovery
how to unlock bootloader
how to flash with adb fastboot
If you don't have anything particulary worth saving on it, then just flash a fresh rom with flashtool.
team_div said:
unlock bootloader using fastboot mode via flashtool, then fastboot flash twrp.
then boot into recovery and attach your device to pc.
links that might help are below
twrp recovery
how to unlock bootloader
how to flash with adb fastboot
Click to expand...
Click to collapse
IGnoTon said:
If you don't have anything particulary worth saving on it, then just flash a fresh rom with flashtool.
Click to expand...
Click to collapse
thanks for replies,
my first problem is FLASHTOOL which is "EMMA" , it dosn't work at all, it always says: "unable to connect to the network" , ... while I really have a network connection working fine !!.
what to do please?
engali555 said:
thanks for replies,
my first problem is FLASHTOOL which is "EMMA" , it dosn't work at all, it always says: "unable to connect to the network" , ... while I really have a network connection working fine !!.
what to do please?
Click to expand...
Click to collapse
ok, get this one:
http://www.flashtool.net/index.php
it works like a charm. And it has firmware downloader built in.
after unlocking the bootloader and installing TWRP, you want to delete the file password.key in /data/system/ using this:
forum.xda-developers.com/showthread.php?t=1646108
then it should be unlocked. good luck.
hi everybody,
I need help from a big expert because I have a big problem with my P10...
ok for starter I know where is my mistake I forget to enable oem security in dev option
of course it's not my only mistake in twrp I do a advenced wipe and I wipe system sd etc...
So now my phone don't boot, twrp goe's when I flash another updape.zip with extarnal sd card and I can't flash anything with fastboot because frp it's lock...
my previous version it's l09c45b101 and I don't find full update.zip of this version just ota...
Some one can help me please
Lykeul said:
hi everybody,
I need help from a big expert because I have a big problem with my P10...
ok for starter I know where is my mistake I forget to enable oem security in dev option
of course it's not my only mistake in twrp I do a advenced wipe and I wipe system sd etc...
So now my phone don't boot, twrp goe's when I flash another updape.zip with extarnal sd card and I can't flash anything with fastboot because frp it's lock...
my previous version it's l09c45b101 and I don't find full update.zip of this version just ota...
Some one can help me please
Click to expand...
Click to collapse
It's not big problem just boot loader lock and relock again the phone is factory reset. Ok
M.KK said:
It's not big problem just boot loader lock and relock again the phone is factory reset. Ok
Click to expand...
Click to collapse
Really ? I try this know
But how relock him when frp it's lock ? Fastboot don't work
Edit: so like I say fastboot don't work ....
i had the same problem only option was to use dc phoenix so you have to pay but maybe try red lotus but it think it wont work because you dont have the option to flash stock recovery.but maybe we should give you a twrp backup of system and boot then you could boot again
crucky said:
i had the same problem only option was to use dc phoenix so you have to pay but maybe try red lotus but it think it wont work because you dont have the option to flash stock recovery.but maybe we should give you a twrp backup of system and boot then you could boot again
Click to expand...
Click to collapse
I paid 15€ on DC Phoenix for flash any update.app but don't boot.
I paid 15€ on DC unlocker for erase frp but don't work.
Unlock and relock don't work
I can't use a backup or twrp because now I have stock recovery.
What can I do ???
:crying:
check the thread to rebrand should work for you
this worked for me:
- relock the bootloader via ADB
- in Developer Option, Enable OEM unlock
- unlock the bootloader again via ADB
His P10 don't boot...
Hello, Try This Methode : https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Hi did you fix your phone?
im having the same issue.
PhysX said:
this worked for me:
- relock the bootloader via ADB
- in Developer Option, Enable OEM unlock
- unlock the bootloader again via ADB
Click to expand...
Click to collapse
hello!
when you say "relock the bootloader via ADB you mean:
adb reboot-bootloader THEN fastboot oem lock (and the code)?
thanks.
EDIT: i was using the wrong command, it is fastboot oem relock and the code... sorry
HWOTA working and solved your problem.
just yesterday I made mine. the bootloader was open but the frp was closed.
the HWOTA has solved it nicely. now vtr-L29C432B185 firmware is up.
Unfortunately, this disadvantage is the low level format after the bootloader has been re-opened as the firmware closes.
Lykeul said:
hi everybody,
I need help from a big expert because I have a big problem with my P10...
ok for starter I know where is my mistake I forget to enable oem security in dev option
of course it's not my only mistake in twrp I do a advenced wipe and I wipe system sd etc...
So now my phone don't boot, twrp goe's when I flash another updape.zip with extarnal sd card and I can't flash anything with fastboot because frp it's lock...
my previous version it's l09c45b101 and I don't find full update.zip of this version just ota...
Some one can help me please
Click to expand...
Click to collapse
Same problem.. and you can bug it to get locked, but won't help... my problem is that I got EMUI 8 with oreo, but also B172 rom flashed at the same time. So if I unlock it but FRP is lock, the phone won't boot to install because of rom.
I have the same issue, but i can´t turn on my phone to unlock OEM.
What can i do?
I also have same problem. I got frp unlock key from Huawey support, but it doesent help to unlock frp. Without it i cant unlock bootloader. Try a lot of things, nothing help. Tommorow i will go go service...
I got answer that motherboard is demage, and repair cost more than new phone....
Tommasavas said:
I also have same problem. I got frp unlock key from Huawey support, but it doesent help to unlock frp. Without it i cant unlock bootloader. Sooo i'm in deep ass with that. Try a lot of things, nothing help. Tommorow i will go go service...
I got answer that motherboard is demage, and repair cost more than new phone....
Click to expand...
Click to collapse
u can have frp removed at https://www.gsmzambia.com
Tommasavas said:
I also have same problem. I got frp unlock key from Huawey support, but it doesent help to unlock frp. Without it i cant unlock bootloader. Try a lot of things, nothing help. Tommorow i will go go service...
I got answer that motherboard is demage, and repair cost more than new phone....
Click to expand...
Click to collapse
Sooo guys, if you have HUAWEI P10 (my phone is VTR-L29), which have FRP LOCK, BOOTLOADER LOECKEd and you HAVE access to ERECOVERY, you can safe you time and money to do this: send me a message, because i can't put outside link.... (you need Frimware Finder, Wifi router, and eRecovery)
I did everything like in this thread after visited phone service, there they told what my phone totaly dad...
Sooo, do it and BE HAPPY.
you managed to fix your cell phone?
---------- Post added at 06:46 AM ---------- Previous post was at 06:15 AM ----------
Tommasavas said:
Sooo guys, if you have HUAWEI P10 (my phone is VTR-L29), which have FRP LOCK, BOOTLOADER LOECKEd and you HAVE access to ERECOVERY, you can safe you time and money to do this: send me a message, because i can't put outside link.... (you need Frimware Finder, Wifi router, and eRecovery)
I did everything like in this thread after visited phone service, there they told what my phone totaly dad...
Sooo, do it and BE HAPPY.
Click to expand...
Click to collapse
you managed to fix your cell phone?
Did you find any solution?
I have a Huawei P10 plus (VKY-L29). Tried all methods to bypass FRP to no success.
- Talkback (V7.3 - Therefore no luck)
- Emergency dialler (*#*#6130#*#*) not picking up as well as other dial codes in emergency dial
- Erecovery (cannot find any recovery files)
- Fastboot mode (phone restarts to Welcome screen soonest booted)
- Wifi (Connect to first Wifi and then forget this network and connect again to 2nd Wifi entering some manual details on the host/proxy and then connect again to force the phone to come up with the error message in order to access help) no luck
Am I missing something? has anyone had success already regarding the Huawei P10 Plus FRP bypass????
Hello xda-community!
I have a problem with my Huawei P10. I flashed the treble LinageOS v4 firmware and because of some problems I wanted to flash another treble firmware or go back to stock, but it is not possible with TWRP (E: unknown command) or ADB (FAILED (remote: Command not allowed)), because FRP is locked and I get an error while flashing. (In OS the OEM-Unlock is greyed out)
Now I don't know what to do and how to unlock FRP.
Thanks for any help
Boot your rom then make sure usb debugging is turned on
ej8989 said:
Boot your rom then make sure usb debugging is turned on
Click to expand...
Click to collapse
Thanks for the answer. USB debugging is turned on and my device will be recognized by my pc.
After a very long research I found a tutorial which brought me back to stock:
https://forum.xda-developers.com/p1...-stock-erecovery-dns-ff-t3730077#post75085397
my phone just can go to download mode,
FRP lock: ON
OEM lock: ON
i already tried that use vol up+bixby+power and i can't go ro recovery mode,
what i need to know is how can i unlock FRP and OEM that i just can use with download mode?
YukiArima said:
my phone just can go to download mode,
FRP lock: ON
OEM lock: ON
i already tried that use vol up+bixby+power and i can't go ro recovery mode,
what i need to know is how can i unlock FRP and OEM that i just can use with download mode?
Click to expand...
Click to collapse
If you're the "owner" you should easily be able to remember your Google email address and password in order to log in to the phone and turn off the FRP if that's what you want to do. But be warned because we are NOT going to help you BYPASS the FRP (Factory Reset Protection).. If you forgot your Google password then go to a computer or another phone and try to log in and when it fails just tap or click "forgot password" and change it and then you can use it on the phone.. The FRP is to prevent thieves from being able to use the phone or factory reset it or anything!
MrMike2182 said:
If you're the "owner" you should easily be able to remember your Google email address and password in order to log in to the phone and turn off the FRP if that's what you want to do. But be warned because we are NOT going to help you BYPASS the FRP (Factory Reset Protection).. If you forgot your Google password then go to a computer or another phone and try to log in and when it fails just tap or click "forgot password" and change it and then you can use it on the phone.. The FRP is to prevent thieves from being able to use the phone or factory reset it or anything!
Click to expand...
Click to collapse
i just can boot to download mode,i can't get my phone to homescreen
YukiArima said:
i just can boot to download mode,i can't get my phone to homescreen
Click to expand...
Click to collapse
Then you need to flash the correct firmware using Odin which is a tool to flash Samsung devices using a Windows computer or laptop. If it's an F version then you need to flash the F version firmware you can't just flash anything!
MrMike2182 said:
Then you need to flash the correct firmware using Odin which is a tool to flash Samsung devices using a Windows computer or laptop. If it's an F version then you need to flash the F version firmware you can't just flash anything!
Click to expand...
Click to collapse
ok i'll try
FRP lock: ON
OEM lock: ON
i am using SM-N950N
i used Odin to flash but setupconnection was the place where my note taking long time and show me its fail.
i need help pls
Can you unlock the frp and oem with out a pc I'm having the same issue
Aimzleez said:
Can you unlock the frp and oem with out a pc I'm having the same issue
Click to expand...
Click to collapse
If you are already locked out of the phone and cannot get into the settings then no you can't do anything without a PC! If you forgot your password or Google account then take the phone to the store and ask for help! If it's stolen they will not help you so you need to be the owner of the phone!!