Database Develop

How to get the Beta "Update" on your Note 9 U1.

So I bought my note 9 three weeks ago, it was ATT carrier branded, since I don't need/like any carrier bloat, I just flashed the unlocked firmware to it, until today its working with no problems at all.
So today I learned that the One UI beta came out, I log on my Samsung+ app I got the banner and hit register but nothing... it will simply send me back to the start, probably because i'm offshore who knows. well I started looking around tried with a VPN, tried spoofing my location, clear cache, clear data ( did this multiple times ) but it will simply not let me join the beta.
So I keep on looking and I find this website https://firmware.science/ it will allow you to download the OTA file and flash it using recovery mode!
Sure I wont get the otas automatically on my phone, but I can simply download then again and flash then as they come out.
I hope this helps anyone like that just wanted to install the latest software!
Note!:
This doesn't mean that your are part of the beta, but means that you will have the beta software on your phone!

sFranKv said:
So I bought my note 9 three weeks ago, it was ATT carrier branded, since I don't need/like any carrier bloat, I just flashed the unlocked firmware to it, until today its working with no problems at all.
So today I learned that the One UI beta came out, I log on my Samsung+ app I got the banner and hit register but nothing... it will simply send me back to the start, probably because i'm offshore who knows. well I started looking around tried with a VPN, tried spoofing my location, clear cache, clear data ( did this multiple times ) but it will simply not let me join the beta.
So I keep on looking and I find this website https://firmware.science/ it will allow you to download the OTA file and flash it using recovery mode!
Sure I wont get the otas automatically on my phone, but I can simply download then again and flash then as they come out.
I hope this helps anyone like that just wanted to install the latest software!
Note!:
This doesn't mean that your are part of the beta, but means that you will have the beta software on your phone!
Click to expand...
Click to collapse
Does doing that wipe my device? Or do I get to keep my stuff?

I wanted to add this for anyone who kept tapping the register button but was simply returned to the banner like nothing happened.
If this is happening and you dont get a toast msg saying "thank you for your support of the One UI Beta" and no OTA follows, try deleting the (beta) Samsung + app data, rebooting and try again.
I tried all day before doing this and got the OTA 5 mins after wiping app data.

Nachorl250 said:
Does doing that wipe my device? Or do I get to keep my stuff?
Click to expand...
Click to collapse
Nope, its a regular update so no need to wipe anything
Already try my apps and games (fortnite, arena of valor) and they work perfect!

Ed Murray said:
I wanted to add this for anyone who kept tapping the register button but was simply returned to the banner like nothing happened.
If this is happening and you dont get a toast msg saying "thank you for your support of the One UI Beta" and no OTA follows, try deleting the (beta) Samsung + app data, rebooting and try again.
I tried all day before doing this and got the OTA 5 mins after wiping app data.
Click to expand...
Click to collapse
Tried everything, to be honest I was just sure that the Samsung+ app would check where you are in the world and if your not on the US it will simply not let you join the beta, the method above worked flawlessly for me!, I'm running One UI at the moment with the dark theme and its awesome!

sFranKv said:
So I bought my note 9 three weeks ago, it was ATT carrier branded, since I don't need/like any carrier bloat, I just flashed the unlocked firmware to it, until today its working with no problems at all.
So today I learned that the One UI beta came out, I log on my Samsung+ app I got the banner and hit register but nothing... it will simply send me back to the start, probably because i'm offshore who knows. well I started looking around tried with a VPN, tried spoofing my location, clear cache, clear data ( did this multiple times ) but it will simply not let me join the beta.
So I keep on looking and I find this website https://firmware.science/ it will allow you to download the OTA file and flash it using recovery mode!
Sure I wont get the otas automatically on my phone, but I can simply download then again and flash then as they come out.
I hope this helps anyone like that just wanted to install the latest software!
Note!:
This doesn't mean that your are part of the beta, but means that you will have the beta software on your phone!
Click to expand...
Click to collapse
I have the N960U (T-Mobile) and I am on version ARK1. My version isn't in the list of options? Or will this not work for the 960U from T-Mobile?

BigMosely said:
I have the N960U (T-Mobile) and I am on version ARK1. My version isn't in the list of options? Or will this not work for the 960U from T-Mobile?
Click to expand...
Click to collapse
Keep in mind that this Beta Update its just for the unlocked firmware, if you want to flash the update you need to first flash this firmware: https://www.sammobile.com/firmwares/galaxy-note9/SM-N960U1/XAA/download/N960U1UES1ARJ9/244752/
After that you will be able to flash the Beta Update

sFranKv said:
Keep in mind that this Beta Update its just for the unlocked firmware, if you want to flash the update you need to first flash this firmware: https://www.sammobile.com/firmwares/galaxy-note9/SM-N960U1/XAA/download/N960U1UES1ARJ9/244752/
After that you will be able to flash the Beta Update
Click to expand...
Click to collapse
Can you flash the unlocked firmware without loosing data?

BigMosely said:
Can you flash the unlocked firmware without loosing data?
Click to expand...
Click to collapse
Yes, I did. No data loss.

I flashed the same zrkp from firmware. Science on my us unlocked note 9 with arj9 firmware. It did a full factory reset. I would have done so anyway as I always do with major updates.
Working flawlessly so far.
Edit: 2 exceptions found. Themes are not working and cannot connect to my gear s3. Android wear watch works as expected.

Question what happens when you go into settings an click on Software update does it do anything..Just curious..I have the ATT variant an I'm planning on flashing the Unlocked Firmware..

papashex said:
I flashed the same zrkp from firmware. Science on my us unlocked note 9 with arj9 firmware. It did a full factory reset. I would have done so anyway as I always do with major updates.
Working flawlessly so far.
Edit: 2 exceptions found. Themes are not working and cannot connect to my gear s3. Android wear watch works as expected.
Click to expand...
Click to collapse
Yea themes are not on beta for some reason, good it worked for you!

GBPackerFanForLife said:
Question what happens when you go into settings an click on Software update does it do anything..Just curious..I have the ATT variant an I'm planning on flashing the Unlocked Firmware..
Click to expand...
Click to collapse
I would not know, I guess we need to wait until beta 2 update and see, probably won't be getting it and we will need to download the new OTA and flash again on recovery

GBPackerFanForLife said:
Question what happens when you go into settings an click on Software update does it do anything..Just curious..I have the ATT variant an I'm planning on flashing the Unlocked Firmware..
Click to expand...
Click to collapse
Ok. First of all. Green and gold till I'm dead and cold.
Second of all, if you flash the U1 firmware and sign up for the beta, then you'll get OTAs automatically through settings.
If you flash the U1 firmware and can't get into the beta program, you can download the update.zip from firmware.science. You will have the official beta build, but you won't get updates through settings, because you aren't part of the beta program.

When I run Odin soon as I goto add the AP file Odin freezes an says not responding..I'm useing Windows 10 on my laptop..Any ideas??Also I have put the correct files in odin but it fails Everytime.. I do the BL an the AP an the CP an then for the CSC I use the Home CsC is that correct then hit start??I can't get it to work at all..do I put any file in USERDATA slot???

GBPackerFanForLife said:
When I run Odin soon as I goto add the AP file Odin freezes an says not responding..I'm useing Windows 10 on my laptop..Any ideas??Also I have put the correct files in odin but it fails Everytime.. I do the BL an the AP an the CP an then for the CSC I use the Home CsC is that correct then hit start??I can't get it to work at all..do I put any file in USERDATA slot???
Click to expand...
Click to collapse
That is normal. Just wait. It will eventually load the AP file. If you're flashing the U1 firmware, there is no Userdata file, so you don't use that slot.
Make sure you are using the modified version of ODIN 3.13.1 and run it as an administrator. There are links to it on XDA. Or if you go to the main beta thread there's links to it in the thread.
Just put the files in their respective slots. BL in BL, AP in AP, etc...
CSC_OYN performs a factory reset. HOME_CSC does not wipe the phone. I always use CSC_OYN when switching from carrier firmware to U1 firmware or vice versa, but it's up to you.
After everything is all loaded up in ODIN, put your phone in download mode. Power off. Then hold power, Bixby, and volume down button all at the same time until it boots to a blue-green screen. Then press volume up to continue.
Plug your phone into your computer and hit start. Then sit back and wait. This will take a while.
That's all the steps. If you have any issues, I encourage you to use the search bar on the forum. These steps and solutions to any issues you may run into have been posted many times in several threads. The search bar is your friend and should always be the first thing you do before posting questions.

Mr. Orange 645 said:
That is normal. Just wait. It will eventually load the AP file. If you're flashing the U1 firmware, there is no Userdata file, so you don't use that slot.
Make sure you are using the modified version of ODIN 3.13.1 and run it as an administrator. There are links to it on XDA. Or if you go to the main beta thread there's links to it in the thread.
Just put the files in their respective slots. BL in BL, AP in AP, etc...
CSC_OYN performs a factory reset. HOME_CSC does not wipe the phone. I always use CSC_OYN when switching from carrier firmware to U1 firmware or vice versa, but it's up to you.
After everything is all loaded up in ODIN, put your phone in download mode. Power off. Then hold power, Bixby, and volume down button all at the same time until it boots to a blue-green screen. Then press volume up to continue.
Plug your phone into your computer and hit start. Then sit back and wait. This will take a while.
That's all the steps. If you have any issues, I encourage you to use the search bar on the forum. These steps and solutions to any issues you may run into have been posted many times in several threads. The search bar is your friend and should always be the first thing you do before posting questions.
Click to expand...
Click to collapse
I wonder since I'm not useing the modified version of Odin that's why it keeps Failing on me..

GBPackerFanForLife said:
I wonder since I'm not useing the modified version of Odin that's why it keeps Failing on me..
Click to expand...
Click to collapse
Yes. That's why I said use the modified version.

I'm assuming since I installed the Firmware then the Beta One Samsung + app won't open..then if I click on the Samsung Members app it says Beta but everything i click on say I'm not registered for the Beta..is that because I manually install the Beta update file..So basically Everytime a new beta version comes out I'm going to have to manually install it..
---------- Post added at 02:58 AM ---------- Previous post was at 02:55 AM ----------
One thing I have noticed on the new Unlocked version of the Firmware an being on the Beta software is that the Stereo speakers on the phone aren't as loud as they were when I was running the ATT version Firmware..Any ideas..

GBPackerFanForLife said:
I'm assuming since I installed the Firmware then the Beta One Samsung + app won't open..then if I click on the Samsung Members app it says Beta but everything i click on say I'm not registered for the Beta..is that because I manually install the Beta update file..So basically Everytime a new beta version comes out I'm going to have to manually install it..
---------- Post added at 02:58 AM ---------- Previous post was at 02:55 AM ----------
One thing I have noticed on the new Unlocked version of the Firmware an being on the Beta software is that the Stereo speakers on the phone aren't as loud as they were when I was running the ATT version Firmware..Any ideas..
Click to expand...
Click to collapse
Yes, you are not part of the official beta.
As far as speaker loudness I have no idea.

Note 8 T-Mob downgrade after update to Pie Beta

Hey All, any chance of getting a step by step to downgrade back to CRK1 or latest Oreo build. I attempted to do so, using the firmware from SamMobile, and it failed during the "Updating System" step with an "Error!" message at 32%. Odin had registered a pass. I installed the Ap, Bl, Cp, and the clean CSC. There was only 30ish percent of battery remaining if that would make a difference. I also had the December update installed when I updated to the DLR6 version.

pzzamakr1999 said:
Hey All, any chance of getting a step by step to downgrade back to CRK1 or latest Oreo build. I attempted to do so, using the firmware from SamMobile, and it failed during the "Updating System" step with an "Error!" message at 32%. Odin had registered a pass. I installed the Ap, Bl, Cp, and the clean CSC. There was only 30ish percent of battery remaining if that would make a difference. I also had the December update installed when I updated to the DLR6 version.
Click to expand...
Click to collapse
logs from odin? Or any error code or anything?

Nothing from Odin at all. Odin registered it as a Pass. And I'm unsure how I would pull logs from the phone. Once the "Error!" appears during update, the phone will enter a bootloop unless I hold down the power button to enter Recovery. I was able to successfully enter Recovery, reinstall the Pie Beta Update from my SD card, and the phone works fine again. However, I do use Samsung Pay, and I've noticed that service has suffered considerably, so I'd like to go back to Oreo for the moment.

pzzamakr1999 said:
Nothing from Odin at all. Odin registered it as a Pass. And I'm unsure how I would pull logs from the phone. Once the "Error!" appears during update, the phone will enter a bootloop unless I hold down the power button to enter Recovery. I was able to successfully enter Recovery, reinstall the Pie Beta Update from my SD card, and the phone works fine again. However, I do use Samsung Pay, and I've noticed that service has suffered considerably, so I'd like to go back to Oreo for the moment.
Click to expand...
Click to collapse
I wouldnt be suprised if samsung locked going back same what they did with nougat/oreo . I cant help u, sry

pzzamakr1999 said:
Hey All, any chance of getting a step by step to downgrade back to CRK1 or latest Oreo build. I attempted to do so, using the firmware from SamMobile, and it failed during the "Updating System" step with an "Error!" message at 32%. Odin had registered a pass. I installed the Ap, Bl, Cp, and the clean CSC. There was only 30ish percent of battery remaining if that would make a difference. I also had the December update installed when I updated to the DLR6 version.
Click to expand...
Click to collapse
Which ODIN are you using? Make sure you're using the modded 3.13.1. Try this: Uncheck the auto-reboot option on ODIN. Flash the Oreo firmware and let it finish. Once it's done, manually reboot into recovery and perform a factory reset. Then boot into the OS.
ScaleneVirus288 said:
I wouldnt be suprised if samsung locked going back same what they did with nougat/oreo . I cant help u, sry
Click to expand...
Click to collapse
That only happens when they update the bootloader version. It has nothing to do with the OS version. The Pie leaks are still on the v5 bootloader.

Ok, I will give that a try. I will admit, I'm really enjoying Pie, and its user interface tweaks. I just may forego Samsung Pay and wait until Pie is out of Beta.
On that note, is there any way to install the old radio and use the Oreo radio rather than the one bundled with Pie, assuming that Pie has a new radio bundled. Because that is kinda the Beta killer.
And last comment, once Pie is out of Beta, what will I have to do to upgrade to the "Release" version. Will it be an Odin install, or should an OTA take care of it?

pzzamakr1999 said:
Ok, I will give that a try. I will admit, I'm really enjoying Pie, and its user interface tweaks. I just may forego Samsung Pay and wait until Pie is out of Beta.
On that note, is there any way to install the old radio and use the Oreo radio rather than the one bundled with Pie, assuming that Pie has a new radio bundled. Because that is kinda the Beta killer.
And last comment, once Pie is out of Beta, what will I have to do to upgrade to the "Release" version. Will it be an Odin install, or should an OTA take care of it?
Click to expand...
Click to collapse
Also check the USB port, use the older USB port this has happened to me or PC and see the phone is probably not compatible with newest USB port....
Sent from my SM-N960U using Tapatalk

pzzamakr1999 said:
Ok, I will give that a try. I will admit, I'm really enjoying Pie, and its user interface tweaks. I just may forego Samsung Pay and wait until Pie is out of Beta.
On that note, is there any way to install the old radio and use the Oreo radio rather than the one bundled with Pie, assuming that Pie has a new radio bundled. Because that is kinda the Beta killer.
And last comment, once Pie is out of Beta, what will I have to do to upgrade to the "Release" version. Will it be an Odin install, or should an OTA take care of it?
Click to expand...
Click to collapse
What issues are you having with Spay? It seems to work for everyone else, me included.
No, you can't flash a different radio.
Not sure yet what will be required when when the official drops. Won't know until it drops.

So the Pay app opens fine, and it authenticates the card without issue. It will also allow me to put my fingerprint in, and then have the countdown start. However, it doesn't seem to enable the mag spoofer or the nfc chip, and when put next to a mag reader or Pay system, nothing happens. The countdown will continue, and will restart if I ask it to. But again, the phone doesnt seem to do anything.

pzzamakr1999 said:
So the Pay app opens fine, and it authenticates the card without issue. It will also allow me to put my fingerprint in, and then have the countdown start. However, it doesn't seem to enable the mag spoofer or the nfc chip, and when put next to a mag reader or Pay system, nothing happens. The countdown will continue, and will restart if I ask it to. But again, the phone doesnt seem to do anything.
Click to expand...
Click to collapse
Weird. I'll have to try it. I thought it was working, but now I'm not sure. I use my Gear S3 so often to pay, now I'm not sure LOL.

Update on the effort to revert back to CRK1.
Used the modified Odin, and un-checked auto-reboot. Phone remained in Download mode.
I could not figure out a way to go from Download mode to recovery mode directly. If someone knows how to do this, it would be appreciated if you could let me know.
However, rather than the "Error!" message, I received a "Erasing" message. Than the phone rebooted, and just kept rebooting, going from T-Mobile splash screen to Samsung and back over and over, with some optimizing apps screens thrown in for good measure.
So I tried again with auto-reboot on, and this time received the "Error!" message, and was able to go into recovery once that happened.
The odd thing is, nothing on my phone was changed, other than having to redo the Samsung biometrics for security. All of my apps and accounts and emails were already there, undeleted.

One more update on the S-Pay. After reinstalling the Update.zip from my SD card in Recovery, iIt does seem like there may have been a change. It is now doing the vibrate thing, which I don't think it was doing before. I will put it to the test later this week.

Downgrade Successful
Performed Factory Reset from Phone menus. (not doing so kept resulting in an unauthorized factory reset prompt)
Performed Factory Reset from Recovery Menu.
Cleared Cache through Recovery Menu
Used Patched Odin
Kept Auto-Restart Checked
Used SamMobile CRK1
Phone restarted successfully.

pzzamakr1999 said:
Performed Factory Reset from Phone menus. (not doing so kept resulting in an unauthorized factory reset prompt)
Performed Factory Reset from Recovery Menu.
Cleared Cache through Recovery Menu
Used Patched Odin
Kept Auto-Restart Checked
Used SamMobile CRK1
Phone restarted successfully.
Click to expand...
Click to collapse
Yes! I'm sorry I thought I told you to try a factory reset. You have to factory reset when downgrading. Otherwise bootloop city. Sorry I wasn't more clear, I could've saved you some frustration.
---------- Post added at 11:18 AM ---------- Previous post was at 11:17 AM ----------
I just went back and re-read my posts. I never said try a factroy reset first. Grrr...I'm so sorry!

Mr. Orange 645 said:
Yes! I'm sorry I thought I told you to try a factory reset. You have to factory reset when downgrading. Otherwise bootloop city. Sorry I wasn't more clear, I could've saved you some frustration.
---------- Post added at 11:18 AM ---------- Previous post was at 11:17 AM ----------
I just went back and re-read my posts. I never said try a factroy reset first. Grrr...I'm so sorry!
Click to expand...
Click to collapse
No worries, and I did very much appreciate the help. I should have realized that that should come first. I was a bit frustrated and wasn't thinking logically. It was actually the "fixing apps" message you get when you upgrade that clued me in I wasn't properly resetting the phone prior to install.
Regardless, its all good, and now that I know how to do it, I'll be more inclined to try these out in the future.

Any specific reason for the downgrade? Anything not working?

Camera issues on pie beta
My ar emoji not working on this pie update and sometimes force closes any1 else having this issue

Fitted2 said:
My ar emoji not working on this pie update and sometimes force closes any1 else having this issue
Click to expand...
Click to collapse
Yes

Mr. Orange 645 said:
Yes
Click to expand...
Click to collapse
You downgraded because no AR emoji? And what force closes are you having?

dami00976 said:
You downgraded because no AR emoji? And what force closes are you having?
Click to expand...
Click to collapse
I never said I downgraded.

(Guide) Upgrade from Oreo to Pie/One UI (Snapdragon/SM-N960, SM-N960U1, SM-N960W)

Let me start off by stating that this is by no means my tutorial, all information was gathered from this community and organized into, hopefully, a helpful tut. Thank you to Max Weinbach, who originally posted this tutorial - due to issues with the file hosting server, that page hasn't been updated in a bit. Hopefully this will help in the meantime... And a big thank you to Venom0642 for hosting these files!
NO ROOT!!!
MUST BE SNAPDRAGON VARIANT (SM-N960, SM-N960U1, SM-N960W)
Optional: This will wipe the data on your phone. Use SmartSwitch to backup your phones data to your computer
Step 1: Download the 3 Items listed below (AT&T N960USQS1ARJA, Odin3, N960USQS1ARJA-U1CSA7)
Venom0642 said:
Download here: AT&T N960USQS1ARJA
Download here: Odin3_v3.13.1_3B_PatcheD
Click to expand...
Click to collapse
Venom0642 said:
Download here: N960USQS1ARJA-U1CSA7
Click to expand...
Click to collapse
Step 2: Copy or Move the "N960USQS1ARJA-U1CSA7.zip" file to your SD card and insert SD card into your Note 9 - If you do not have an SD card you can use ADB sideload to flash this .zip later in the process but I will not be going into much detail on this option. Skip this step if this is you and I will let you know when to use adb later on
Step 3: Unzip the "AT&T_N960USQS1ARJA" folder - Notice that you will have 5 files within this folder, we will only be using the 4 that begin with BL, AP, CP, and CSC
Step 4: Unzip the "Odin3_v3.13.1_3B_PatcheD" folder and launch the Odin3 executable
Step 5: Within Odin, click on the "BL" box and navigate to your "AT&T_N960USQS1ARJA" folder and select the corresponding file that beings with "BL". Do the same thing for the AP, CP and CSC fields within Odin, you can leave USERDATA empty - The BL, AP, CP, and CSC fields within Odin should now be populated with the "AT&T_N960USQS1ARJA" files
Step 6: Power down your phone. Once it is off, enter Odin mode by: holding Power button + Volume Down + Bixby button - Your phone may prompt you asking if you want to download a custom OS, press the Volume Up button to continue.
Step 7: Plug your Note 9 into your computer - If Odin is communicating with your phone, on the left hand side of the screen (odin on your computer), under "Log", you should see something like "Added!!"
Step 8: Hit "Start" within Odin - Your phone will now flash to N960USQS1ARJA and will automatically reboot into recovery mode when it is done. This will take a few minutes!
Step 9: You should now be in recovery mode. If you are not, power down your phone and boot into recovery by holding Power button + Volume Up + Bixby button. Use the volume keys to highlight "Wipe data/factory reset" , use the Power button to select it and select "Yes" to continue. - After the wipe completes, you will be brought back to the main menu of Recovery Mode
Step 10: Use the volume keys to highlight “apply update from SD card” and select it with the power key - If you do not have an SD card, this is where you would select "apply update from adb", open a command prompt/terminal on your computer and type: adb sideload <file location of N960USQS1ARJA-U1CSA7.zip>
Step 11: Now find the N960USQS1ARJA-U1CSA7.zip file that you put onto your SD card earlier by using the volume buttons to navigate and power button to select it - Your phone will now flash to N960USQU1CSA7 (Pie/OneUI) and will boot up normally when it is finished. This will take a few minutes!
Step 12: You are now on Android Pie. Walk through the normal startup menus and then use SmartSwitch to restore your data. Done!
Hope this helps a few people! I will try to keep this thread up to date with current builds as Venom0642 makes them available

I have a Snapdragon 845 U1 Unlocked version, using firmware.science it appears that I can upgrade directly to the Unlocked bloatfree firmware. Using your method I'll be upgrading to ATT version with ATT bloat. Is my understanding correct?

ceo.mtcl said:
I have a Snapdragon 845 U1 Unlocked version, using firmware.science it appears that I can upgrade directly to the Unlocked bloatfree firmware. Using your method I'll be upgrading to ATT version with ATT bloat. Is my understanding correct?
Click to expand...
Click to collapse
I do not know anything about the firmware science route, you would need someone else to help you there. But this version will have at&t bloat, you will have to disable the handful of apps they preload so you don't have to deal with them

Rwhyayn said:
I do not know anything about the firmware science route, you would need someone else to help you there. But this version will have at&t bloat, you will have to disable the handful of apps they preload so you don't have to deal with them
Click to expand...
Click to collapse
I went ahead and did that anyway and Viola! I have pie now. Just applied update

I'm running zrll what are the benefits running this over zrll? Does Samsung pay still work?

Does it work with every SD variant? Mine is SM-N9600 Brazil

Nice job on the tutorial!! I have been doing the Z beta builds, but have gone back to Oreo to wait for the official release!! Hopefully within the next week... but your guide here is very easy to understand and I'm sure it will help alot of people!!

Jaimesco12 said:
I'm running zrll what are the benefits running this over zrll? Does Samsung pay still work?
Click to expand...
Click to collapse
C builds add full support for carrier features. With T-Mobile, you get Advanced Messaging and a few other things I can't remember now. Samsung Pay works on all beta builds, just not Google Pay.

NotATreoFan said:
C builds add full support for carrier features. With T-Mobile, you get Advanced Messaging and a few other things I can't remember now. Samsung Pay works on all beta builds, just not Google Pay.
Click to expand...
Click to collapse
Ok gotcha, so this latest c build is still a beta? If not Will there be a path to just flash zip on the c builds when the official pie release comes out?

Cristiano Matos said:
Does it work with every SD variant? Mine is SM-N9600 Brazil
Click to expand...
Click to collapse
I don't think so, as far as I know you can't crossflash firmwares from different variants (in this Case N960U or N960U1 to N9600 or vice versa).
But I'm on the same boat, mine is also N9600 and eagerly waiting for any sign of Pie.
Have you seen the release notes for Pie in the members app? Make no sense to me.

Fota showing 1CSA8 lol.
Sent from my SM-N960U using XDA Labs

Venom0642 said:
Fota showing 1CSA8 lol.
Click to expand...
Click to collapse
Dam I just got on 7 lol

Venom0642 said:
Fota showing 1CSA8 lol.
Click to expand...
Click to collapse
I guess I'm skipping 7 lol

Thanks for tutorial.
One question, if I'm already on the N96OUSQS1ARJA build can I skip that part and go straight to the PIE upgrade? Or is there any reason I should install ARJA version your showing?
TIA
Sent from my SM-N960U using XDA Labs

LouK said:
Thanks for tutorial.
One question, if I'm already on the N96OUSQS1ARJA build can I skip that part and go straight to the PIE upgrade? Or is there any reason I should install ARJA version your showing?
TIA
Click to expand...
Click to collapse
If your on N96OUSQS1ARJA yes can go straight to 1CSA7 , so no need to odin to 1ARJA
Sent from my SM-N960U using XDA Labs

LouK said:
Thanks for tutorial.
One question, if I'm already on the N96OUSQS1ARJA build can I skip that part and go straight to the PIE upgrade? Or is there any reason I should install ARJA version your showing?
TIA
Click to expand...
Click to collapse
Happy to help brotha! Venom already answered your question, but yes you can do step 1 (even though you don't need all of those files) and step 2 and then skip right to step 9

Venom0642 said:
If your on N96OUSQS1ARJA yes can go straight to 1CSA7 , so no need to odin to 1ARJA
Click to expand...
Click to collapse
Thanks ....
So now I have something to do this weekend.....
Sent from my SM-N960U using XDA Labs

q173242 said:
I don't think so, as far as I know you can't crossflash firmwares from different variants (in this Case N960U or N960U1 to N9600 or vice versa).
But I'm on the same boat, mine is also N9600 and eagerly waiting for any sign of Pie.
Have you seen the release notes for Pie in the members app? Make no sense to me.
Click to expand...
Click to collapse
I saw the release notes now and they said march only

My release notes only contain a mess... no mention of note 9, only low or mid tier devices listed with date 28th of February.

I'm using Samsung Note 9 N600 dual SIM. Can I update using this method.

Urgent help regarding downgrading from pie to oreo or nougat....

Hi. i need urgent help regarding downgrading my galaxy note 8 from pie to oreo or nougat. i am using android pie from last 1 month. some of my apps stop working so i decided to downgrade from pie to oreo. i had downloaded oreo firmware december 2018 version from sammobile and tried to flash with odin 3.13.1 but it failed. i had tried different versions of odin but every time flashing stuck at set partition nand write start.i always run odin as administrator. i also tried to flash different firmware version like sept version of oreo but still it failed. i downloaded nougat firmware from sammobile. it flashed normally and i was happy but when my phone restarted i was shocked. my device was factory reseted but with android pie version. it looked flashing nougat only formatted my device. i am tired. i tried every damn thing. i tried changing usb port, tried differant usb cable, reinstalled device drivers, made sure that usb debugging is on , even tried on differant pc. but no result. then i tried emergency software recovery in smart switch. if i connect my phone switched on then smart switch discover my device but when i connect my device in download mode then smart switch says that device not supported. i contacted service centre but they say they do not downgrade the device.please please please someone help me. i am attaching a screenshot of odin stuck at nand write start.

drvish said:
Hi. i need urgent help regarding downgrading my galaxy note 8 from pie to oreo or nougat. i am using android pie from last 1 month. some of my apps stop working so i decided to downgrade from pie to oreo. i had downloaded oreo firmware december 2018 version from sammobile and tried to flash with odin 3.13.1 but it failed. i had tried different versions of odin but every time flashing stuck at set partition nand write start.i always run odin as administrator. i also tried to flash different firmware version like sept version of oreo but still it failed. i downloaded nougat firmware from sammobile. it flashed normally and i was happy but when my phone restarted i was shocked. my device was factory reseted but with android pie version. it looked flashing nougat only formatted my device. i am tired. i tried every damn thing. i tried changing usb port, tried differant usb cable, reinstalled device drivers, made sure that usb debugging is on , even tried on differant pc. but no result. then i tried emergency software recovery in smart switch. if i connect my phone switched on then smart switch discover my device but when i connect my device in download mode then smart switch says that device not supported. i contacted service centre but they say they do not downgrade the device.please please please someone help me. i am attaching a screenshot of odin stuck at nand write start.
Click to expand...
Click to collapse
Unfortunately you can't downgrade. Once you have flashed a higher bootloader version you are stuck with it.
If you are on bootloader v5 you may be able to downgrade to the last Oreo build, I am not 100% sure on that though.

Only if they are same bootloader
Sent from SM-N950U Still Rooted Note 8

stonedpsycho said:
Unfortunately you can't downgrade. Once you have flashed a higher bootloader version you are stuck with it.
If you are on bootloader v5 you may be able to downgrade to the last Oreo build, I am not 100% sure on that though.
Click to expand...
Click to collapse
Oh.... i checked my bootloader version is 6. Is there any way to downgrade to version 5 ????

No, there is not, sorry

Ok. So the final note is that i am not able to downgrade... so let me help with other issue that might help me. Knox on my device is tripped so i cant use latest samsung health app. Earlier on oreo i was able to install older version of app and then update it. But now on pie. Older version is not installing. It always says apk not installed. Atleast help me with that

drvish said:
Ok. So the final note is that i am not able to downgrade... so let me help with other issue that might help me. Knox on my device is tripped so i cant use latest samsung health app. Earlier on oreo i was able to install older version of app and then update it. But now on pie. Older version is not installing. It always says apk not installed. Atleast help me with that
Click to expand...
Click to collapse
You need to be rooted to be able to get that working again, some roms also have that patched already...
Although the thread is about the s7 I believe it is exactly the same for our note 8.
https://www.google.com/amp/s/forum....de-how-to-s-health-devices-knox-t3543306/amp/

stonedpsycho said:
You need to be rooted to be able to get that working again, some roms also have that patched already...
Although the thread is about the s7 I believe it is exactly the same for our note 8.
https://www.google.com/amp/s/forum....de-how-to-s-health-devices-knox-t3543306/amp/
Click to expand...
Click to collapse
I dont want to root again.... rooting will not let banking apps work.moreover if i wanted to root. Root files for note 8 pie are not available right now. I installed patched app but it does not have heart rate monitor and spo2 which renders heart rate sensor useless.... thats why i am so desperate for that app

drvish said:
I dont want to root again.... rooting will not let banking apps work.moreover if i wanted to root. Root files for note 8 pie are not available right now. I installed patched app but it does not have heart rate monitor and spo2 which renders heart rate sensor useless.... thats why i am so desperate for that app
Click to expand...
Click to collapse
As far as I am aware it is not possible without root.

drvish said:
I dont want to root again.... rooting will not let banking apps work.moreover if i wanted to root. Root files for note 8 pie are not available right now. I installed patched app but it does not have heart rate monitor and spo2 which renders heart rate sensor useless.... thats why i am so desperate for that app
Click to expand...
Click to collapse
Just use Magisk Hide to disguise, that you are using root

Reaper1337 said:
Just use Magisk Hide to disguise, that you are using root
Click to expand...
Click to collapse
I dont want to root. Moreover rooting files are not available for pie update.... so i think i am left with only 1 option to wait for someone to patch samsung health app to include heart rate sensors.....

drvish said:
I dont want to root. Moreover rooting files are not available for pie update.... so i think i am left with only 1 option to wait for someone to patch samsung health app to include heart rate sensors.....
Click to expand...
Click to collapse
You can flash TWRP, copy /system/build.prop to the PC or SD Card, edit it on the PC, put it back in /system.
Once you are done, just flash stock revovery via TWRP.
It sounds hard, but it's eazy if you know what you are doing. Banking apps will still work, and with build.prop edited s health will work too.
I am not gonna walk you trough the entire process but this is a summary.

Xenos7 said:
You can flash TWRP, copy /system/build.prop to the PC or SD Card, edit it on the PC, put it back in /system.
Once you are done, just flash stock revovery via TWRP.
It sounds hard, but it's eazy if you know what you are doing. Banking apps will still work, and with build.prop edited s health will work too.
I am not gonna walk you trough the entire process but this is a summary.
Click to expand...
Click to collapse
Thats the problem bro.... i downloaded twrp from official twrp website and tried to flash it. Odin message was pass but when i rebooted my phone in recovery mode my phone was still on stock recovery.... same thing happened with my galaxy tab.

I hope someone can provide me edited s health apk

drvish said:
Thats the problem bro.... i downloaded twrp from official twrp website and tried to flash it. Odin message was pass but when i rebooted my phone in recovery mode my phone was still on stock recovery.... same thing happened with my galaxy tab.
Click to expand...
Click to collapse
Oooh that, it's nothin.
You just need to hold volume up + bixby and power just before the phone auto restarts from download mode. When you do that it will boot twrp.
If you don't understand it go watch MaxLee on youtube, his method of flashing twrp on s8/n8

Xenos7 said:
Oooh that, it's nothin.
You just need to hold volume up + bixby and power just before the phone auto restarts from download mode. When you do that it will boot twrp.
If you don't understand it go watch MaxLee on youtube, his method of flashing twrp on s8/n8
Click to expand...
Click to collapse
So there is no other method except flashing twrp.... i think i have to wait for patched s health app or to leave that.... coz i really dont want to mess with stock firmware anymore....

drvish said:
So there is no other method except flashing twrp.... i think i have to wait for patched s health app or to leave that.... coz i really dont want to mess with stock firmware anymore....
Click to expand...
Click to collapse
The way I know it, there is no way without twrp or root, and you said you don't want root because of banking apps.
If you flash twrp, do the thing with build.prop, and then flash stock recovery, you could still recive OTA updates and banking apps will work.
You just have to set up s health before the next OTA because that will revert built.prop back to normal.
But as long as you set up s health before that it will be ok.

Xenos7 said:
The way I know it, there is no way without twrp or root, and you said you don't want root because of banking apps.
If you flash twrp, do the thing with build.prop, and then flash stock recovery, you could still recive OTA updates and banking apps will work.
You just have to set up s health before the next OTA because that will revert built.prop back to normal.
But as long as you set up s health before that it will be ok.
Click to expand...
Click to collapse
Leave that bro coz m not ready to do that. Just help me with 1 thing if possible. There was other way to use s health on knox tripped device. That was downloading s health 4.8 version install it and open it. It will stuck at loading screen. Update it and it will work fine. Earlier i get it working that way when my device has oreo version. But now after pie update when i try to install any s health apk before version 5 that is 4.5, 4.7 or 4.8. I always get a message app not installed. After version 5 app get installed but again with root problem. Can u help me with installing old version. I dont know why s health old version is not getting installed. I had some other apps that are now discontinued. That apps get installed easily

drvish said:
Leave that bro coz m not ready to do that. Just help me with 1 thing if possible. There was other way to use s health on knox tripped device. That was downloading s health 4.8 version install it and open it. It will stuck at loading screen. Update it and it will work fine. Earlier i get it working that way when my device has oreo version. But now after pie update when i try to install any s health apk before version 5 that is 4.5, 4.7 or 4.8. I always get a message app not installed. After version 5 app get installed but again with root problem. Can u help me with installing old version. I dont know why s health old version is not getting installed. I had some other apps that are now discontinued. That apps get installed easily
Click to expand...
Click to collapse
The reason you can't install the modded version is because the version that was modded is less than pre-installed version on the device. As of now, you can't downgrade apps, only upgrade. Your only option is to wait for someone to patch a later version from the version you got installed on your phone.
I think someone can even just change a number in AndroidManifest.xml install it and then just upgrade.
I'm sure a patched version will pop-up again somewhere on xda, just make sure it's later version than the version pre-installed into the system.

Xenos7 said:
The reason you can't install the modded version is because the version that was modded is less than pre-installed version on the device. As of now, you can't downgrade apps, only upgrade. Your only option is to wait for someone to patch a later version from the version you got installed on your phone.
I think someone can even just change a number in AndroidManifest.xml install it and then just upgrade.
I'm sure a patched version will pop-up again somewhere on xda, just make sure it's later version than the version pre-installed into the system.
Click to expand...
Click to collapse
Hmmm.... lets wait for some godman to do the favour..... i am from medical profession so dont know much abt this coding stuff. Otherwise i would have done that myself :laugh:

Root galaxy S10 (July security patch update)

hi to all, has anyone managed to root on galaxy s10 with the July security patch update? I tried the same method with magisk but there is nothing to do, every time it gives me a different error. In the last attempt I made during the boot phase, in the upper left corner, it was written: "only official released binaries are allowed to be flashed" or something like that.

You didnt do it right. I would suggest youtube the magisk rooting process

Same tried to root it
I, was able to get it to root but the camera still makes my device rebooted
And tried to do it with ap file by changing recovery inside to the patched twrp that didn't work just booted into stock recovery instead

Cristian-104 said:
hi to all, has anyone managed to root on galaxy s10 with the July security patch update? I tried the same method with magisk but there is nothing to do, every time it gives me a different error. In the last attempt I made during the boot phase, in the upper left corner, it was written: "only official released binaries are allowed to be flashed" or something like that.
Click to expand...
Click to collapse
I have already tried EVERYTHING, in download mode I can not get the> Prenormal <to> Check ing <. The option of OEM lockdown is there, has always been there.

TheUndertaker21 said:
Same tried to root it
I, was able to get it to root but the camera still makes my device rebooted
And tried to do it with ap file by changing recovery inside to the patched twrp that didn't work just booted into stock recovery instead
Click to expand...
Click to collapse
TWRP ≠ Root.
With the latest patch the camera crashes if TWRP is flashed. With stock recovery everything should work fine.
I'm on Exynos ASG8 without any issues, except slow wifi in apps (not browser).

Jannomag said:
TWRP ≠ Root.
With the latest patch the camera crashes if TWRP is flashed. With stock recovery everything should work fine.
I'm on Exynos ASG8 without any issues, except slow wifi in apps (not browser).
Click to expand...
Click to collapse
OH that's a known issue then?
I need my custom rom and twrp lol

TheUndertaker21 said:
OH that's a known issue then?
I need my custom rom and twrp lol
Click to expand...
Click to collapse
It is...nearly everytime Samsung throws out a new security patch TWRP is crashing the camera.
This is what I found out after having the same issue. I don't know if there's a new version for the latest patch.
Aren't the custom roms based on One UI? Shouldn't the stock recovery still work? (I really don't know)

Jannomag said:
It is...nearly everytime Samsung throws out a new security patch TWRP is crashing the camera.
This is what I found out after having the same issue. I don't know if there's a new version for the latest patch.
Aren't the custom roms based on One UI? Shouldn't the stock recovery still work? (I really don't know)
Click to expand...
Click to collapse
TWRP is good to have if something goes wrong.
I can have custom rom without twrp but that's not the whole of it.
Hope it gets patch soon

TheUndertaker21 said:
TWRP is good to have if something goes wrong.
I can have custom rom without twrp but that's not the whole of it.
Hope it gets patch soon
Click to expand...
Click to collapse
It's easy to flash it, even without running system.

Hi everyone, I'm still ASD4 and basically haven't update since because everything is a hassle these days. Now I thought maybe it's time to update, but keep reading things like this and camera, wifi bootloops problems etc.
Are these issues a real thing? or just some individual cases where it happens?

It's real like a $2 dollar bill.

bininga59 said:
I have already tried EVERYTHING, in download mode I can not get the> Prenormal <to> Check ing <. The option of OEM lockdown is there, has always been there.
Click to expand...
Click to collapse
You have to turn off all data ( wi-fi and 4g) and manually set the date to 7 days back.

FlatOutRU said:
You have to turn off all data ( wi-fi and 4g) and manually set the date to 7 days back.
Click to expand...
Click to collapse
I have already made. As I said, I unlock the bootloader and lock (developer option or download mode) as I want,> prenormal <does not go away.

Did a root today without issues on my S10 with ASG8

ru_dimka said:
Did a root today without issues on my S10 with ASG8
Click to expand...
Click to collapse
everything works? twrp installed? magisk etc.?

chieco said:
everything works? twrp installed? magisk etc.?
Click to expand...
Click to collapse
There is no twrp for ASG8. Others stuff works well!

ru_dimka said:
There is no twrp for ASG8. Others stuff works well!
Click to expand...
Click to collapse
I'm always afraid that I install something or make a small change and end up in a bootloop... I wish twrp and everythign work just fine like before and I could make a backup after installing a rom and doing the most basic stuff.

Since this is the first post that comes on Google for "only official released binaries" "s10".
I had this problem again and again, and it seems that it was caused by one of the reboot not being done with the correct timing with the 3 buttons.
The thing I was missing was after flashing the patched AP files (and the other files).
When you restart, keep the 3 buttons pressed until you see the blue screen and then release only power (keep vol up + bixby) to get into reset mode.
I think I didn't keep them pressed long enough.
If the device restarts, keep pressing the 3 buttons (never let it restart without pressing them).
Once the factory wipe has been done: Restart with the 3 buttons, and keep them pressed until 1 to 2 sec after the screen that asks you to press the power button to continue.