Database Develop

fail flash s5 mini G800F

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G800FXXU1ANFF_G800FXEO1ANF3_G800FXXU1ANFF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
//
where I can find pit file for G800F
knox , after fail flash still loaded bad

Odin fail. PLEASE help me.

I have a Galaxy S6 edge from verizon(If that wasn't already obvious). I bought it from craigslist for 450$ and it seemed like a steal. But the phone is stuck in Reactivation lock and I cant fix it. I've tried odin. And it keeps failing. I tired different firmware version ports and cables and yet it still fails. This the error.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Receive Response from boot-loader
Can someone please help me with this. I can't get my money back and it took so long to save.:crying:

Are you flashing the correct firmware?
Also, with the recovery lock issue you will need to contact the seller and have him unlock it for you.

Help can't flash anything to TMobile Note 5

I'm trying to go back to stock and i've tried every which way. When I try to do it through Odin it fails. I've tried on every USB port I have.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I tried through Smart Switch and it says its a Galaxy Edge 7 so it doesn't let me do the emergency restore.
Then I tried to flash any other room though TWRP and it just says failed and give Error 7.
Any help will be appreciated.

You need to download the correct firmware for your device

Possibly debrand or flash to stock rom

I unlocked my old T-Mobile Note 4 but I would like to debrand it with Note 4 stock rom or international stock rom, I tried N910FXXS1DQC8/N910FBTU1DPL1 but as expected it fails. Just in case here is the Odin 3.12 log
Code:
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> FAIL! (Auth)
If i am correct I N910T can work with most N910F roms, but it will not work with N910F firmware, N910F bootloaders, and N910F basebands/modems.
Is there a way i can flash then use my phone to an international Note4 stock rom, without T-Mobile crap and use it with other carriers with 4G, hotspot, etc.
Thanks

[HELP][GT-I9295][STOCK ROM] Fail to install firmware 5.0.1

Hey guys I was going to update my S4 active from 4.4.2(Stock not rooted) to 5.0.1 through Odin but it failed and I don't know what to do. Any help is appreciated
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
EDIT: DOWNLOADED ANOTHER FIRMWARE FROM SAMMOBILE AND NOW IT WORKS!

Download again from sammobile just to be sure file is not corrupted.
Use Odin v3.7
Use good data cabe. Use good USB. Do no use USB hub.

wilsonhlacerda said:
Download again from sammobile just to be sure file is not corrupted.
Use Odin v3.7
Use good data cabe. Use good USB. Do no use USB hub.
Click to expand...
Click to collapse
Thanks for the reply. I already resolved the issue. I downloaded another firmware and now it works