"odin flash problem" - Galaxy S 4 i9506 Android Development

<ID:0/016> Added!!
<ID:0/016> Odin engine v(ID:3.1207)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> NAND Write Start!!
<ID:0/016> SingleDownload.
<ID:0/016> boot.img
<ID:0/016> recovery.img
<ID:0/016> system.img.ext4
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/016> Removed!!
Need a solution for this odin problem .
Phone model: Samsung S4 LTE (I9506).

Have you tried to flash it with a stock rom or not? Try that, and I assume you have a right version and so on...

Related

GT-P1000 flash fails - I need help please

Hi , When I run Odin3_v1.7 to flash my GT-P1000 with GB_Stock_Safe_v5, the flash always fails after movinand.mst.
I really appreciate your help guys.
Here is odin report:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> cache.rfs
<ID:0/005> dbdata.rfs
<ID:0/005> factoryfs.rfs
<ID:0/005> movinand.mst
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Softbricked SM-G900A Help me pls.

When i tried to unbrick my phone in odin i get this error:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Help with S6

ho, i have a S6 from att g920a, i do a factory reset and dont start any more, only see the first screen "S6" and reboot constantly, turn on only if its connected to the charger, already try to flash with odin but not lucky, THANKS!!!
this is with odin 3.10.7
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
latest firm OJ7
THANKS!!!

twrp issue

I updated to Marshmallow and after the update I could not install the twrp i got failed
Message
PHP:
<ID:0/010> Odin engine v(ID:3.1101)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> NAND Write Start!!
<ID:0/010> FAIL! (Auth)
<ID:0/010>
<ID:0/010> Complete(Write) operation [QRCODE]failed[/QRCODE].
<OSM> All threads completed. (succeed 0 / failed 1)
I just found the solution turned out the reactivation lock was the problem. just turn it off
setting> security and turn off 'reactivation lock

Odin Errors

When I try to flash my phone I get errors like
1.
<ID:0/010> Odin engine v(ID:3.1401)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 4659 M
<ID:0/010> SetupConnection..
<ID:0/010> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
2.
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin.lz4
<ID:0/008> NAND Write Start!!
3.
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
4.
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 4661 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> param.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How to fix it
UPD: i fixed it https://samfw.com/firmware/SM-A600FN/SEK/A600FNXXU9CVE1
And the same error occurs with other firmware versions? Any error shows on phone screen? And what are you trying to flash?
nqnxev said:
And the same error occurs with other firmware versions? Any error shows on phone screen? And what are you trying to flash?
Click to expand...
Click to collapse
1.Yes
2.No
3.I am trying to flash official android 8 firmware (downgrade)
blvxrd said:
3.I am trying to flash official android 8 firmware (downgrade)
Click to expand...
Click to collapse
Here's the problem. It's impossible to downgrade to firmware with lower bootloader version. However, it is possible if you unlock your bootloader, flash custom recovery and then flash your Oreo through TWRP/OrangeFox.
nqnxev said:
Here's the problem. It's impossible to downgrade to firmware with lower bootloader version. However, it is possible if you unlock your bootloader, flash custom recovery and then flash your Oreo through TWRP/OrangeFox.
Click to expand...
Click to collapse
thanks, i have already repaired it

Categories

Resources