Database Develop

Huawei p8 lite 2017 bricked after wrong oem flash

(SOLVED) So I wanted to debrand my phone, and I saw this post https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
problem is, the oem I flashed with twrp was for the p9 lite, now my phone doesn't boot inside the os, it only goes to huawei erecovery but the download always fails. I can boot to fastboot mode but everything I try to do it says command not allowed, only fastboot devices work
I hope someone can help me as I really need my phone for work, thanks very much
my original cust was C02
I also have a twrp backup I did, but I just cant get inside twrp because as soon the phone turns on it goes to erecovery
Edit: i finally resolved and I'm going to really help you if you flashed the wrong oem file just like me, just follow these steps:
1. since you installed a new oeminfo, you are gonna need to unlock the bootloader again, (just like you did the first time), but wait! here is what I did wrong, when you request an unlock code, huawei in the unlock page is gonna ask you for your imei and serial number, I was lazy and I got my imei via fastboot instead of checking the one on my phone's box, worst idea ever because when you flash another oem your imei is gonna change so that's why in the site it said sn and imei are mismatching, so take the IMEI on your phone's box and NOT via fastboot. Anyway, let's go to part 2
2. in the unlocking site they are gonna ask for a product id wich you can get by writing *#*#1357946#*#* in the phone's dialpad, but you're probably thinking "how can I do that if my phone does't boot the os?" but don't worry my brudda! just download this https://cloud.mail.ru/public/KGmS/1cEhHg1G6 , open it and chose huawei y300-0100 as product model, then put your IMEI (take the one from your phone's box!!) and it's gonna give you the product id you need in the huawei site.
3. once they give you the unlocking password, power off your huawei and connect it in your pc with your usb while holding the volume down button, you should go in fastboot mode
4. once you are in fastboot mode write in the cmd fastboot oem unlock (9982883838382365) <<(instead of this numbers write the unlocking password they gave you in the huawei unlocking site) aaaand done, you unlocked the bootloader once again.
5. if you previously had twrp (before flashing the wrong oem file) it's gonna pop up when you boot the phone, now you can use fastboot or twrp again to flash the right oem (or stock rom)
I REALLY HOPE I'M GONNA HELP YOU BECAUSE I KNOW HOW BAD IT FEELS WHEN YOU BRICK YOUR DEVICE LIKE I DID!!
Now bye everyone I need to go play soccer and I'm late

yeahboi99 said:
So I wanted to debrand my phone, and I saw this post https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
problem is, the oem I flashed with twrp was for the p9 lite, now my phone doesn't boot inside the os, it only goes to huawei erecovery but the download always fails. I can boot to fastboot mode but everything I try to do it says command not allowed, only fastboot devices work
I hope someone can help me as I really need my phone for work, thanks very much
my original cust was C02
I also have a twrp backup I did, but I just cant get inside twrp because as soon the phone turns on it goes to erecovery
Click to expand...
Click to collapse
FRP status? (in fastboot)
Phone status? (in fastboot)

unlock the bootloader again, even if it says its locked, after that fastboot should work fine. then you can try again booting into twrp and flash the right oeminfo

Alex261099 said:
FRP status? (in fastboot)
Phone status? (in fastboot)
Click to expand...
Click to collapse
Hi thanks for the reply
when I open fastboot under the little android guy it says:
PHONE Unlocked
FRP Unlock

yeahboi99 said:
Hi thanks for the reply
when I open fastboot under the little android guy it says:
PHONE Unlocked
FRP Unlock
Click to expand...
Click to collapse
firstly try to unlock the bootloader
if nothing happens
a. start praying
b. relock and then unlock the bootloader.... it's the only thing that i have in mind
i'm not responsible for any damage

Striike said:
unlock the bootloader again, even if it says its locked, after that fastboot should work fine. then you can try again booting into twrp and flash the right oeminfo
Click to expand...
Click to collapse
hi thx for the tip but i'm in the huawei unlock page and it's asking me for my phone's product id, wich you can only get by dialing *#*#1357946#*#* in the dialpad

yeahboi99 said:
hi thx for the tip but i'm in the huawei unlock page and it's asking me for my phone's product id, wich you can only get by dialing *#*#1357946#*#* in the dialpad
Click to expand...
Click to collapse
have you ever unlocked your bootloader?
have you saved the code? it's the same

Alex261099 said:
have you ever unlocked your bootloader?
have you saved the code? it's the same
Click to expand...
Click to collapse
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho

yeahboi99 said:
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho
Click to expand...
Click to collapse
have you used windows for unlocking?
if yes windows 10?
if yes have you used powershell?
if yes press arrow up until you see fastboot oem unlock "number", copy the number (it's the code!!!)
if no .... idk i'll do some research

yeahboi99 said:
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho
Click to expand...
Click to collapse
Lesson in life: ALWAYS save the bootlocker unlock code
Good luck

Alex261099 said:
have you used windows for unlocking?
if yes windows 10?
if yes have you used powershell?
if yes press arrow up until you see fastboot oem unlock "number", copy the number (it's the code!!!)
if no .... idk i'll do some research
Click to expand...
Click to collapse
I used cmd in windows 10 and it doesn't have the arrow key
thanks for helping me XD and by the way I checked my imei on a site and it says that my device is a p9 (what the heck?) I guess I need to install some p9 files to make my phone work again?
grazie

yeahboi99 said:
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho
Click to expand...
Click to collapse
you should have got an email with the code in it, it was like this for me.

Striike said:
you should have got an email with the code in it, it was like this for me.
Click to expand...
Click to collapse
I got it directly in the site I also tried this method https://forum.xda-developers.com/p9/help/how-to-product-id-bricked-p9-t3561156
but when I click on commit after writing all in the huawei unlock site bars it says SN and IMEI are mismatched

I mean you really f***ed up there. I thought that you could restore the device by eRecovery but If you would do that you would brick it completely bc it would Download everything for the p9...
you can't do anything without the unlock Code.
You could otherwise try to force upgrade via dload
---------- Post added at 09:05 PM ---------- Previous post was at 09:02 PM ----------
You could try this Generator https://cloud.mail.ru/public/KGmS/1cEhHg1G6
or DC unlocker (costs money)

You can use Firmware finder for PC and eRecovery DNS method to restore your phone to any firmware you want

Relock bootloader for account bound

Hi guys. I would like to know a thing:
I have bought a Mi 8 already unlocked from a shop. If I want to relock the bootloader again and bound my account to it, for future unlocks in case of wrong flash with Mi Flash (default flash mode is: "clean all and relock", that I can also omit to see for error), can I flash China without incurring in a brick? Because the phone will be delivered to me with Global Rom (that I know generate a brick with relocked bootloader).
Thanks to who will answer me.

I have the same question... It's possible change the account used for the bootloader unlock?

BigBrunoRamos said:
I have the same question... It's possible change the account used for the bootloader unlock?
Click to expand...
Click to collapse
Without any other method to do this, we can only relock bootloader and follow the common way to unlock it with own account.

Orlaf said:
Without any other method to do this, we can only relock bootloader and follow the common way to unlock it with own account.
Click to expand...
Click to collapse
I purchased a Xiaomi mi 8 with unlocked bootloader without notice from the reseller. The outcome when I updated with miflash was a bricked phone. When I tried to use miunlock I saw a message that my phone is not bound to this account.

ekc_1971 said:
I purchased a Xiaomi mi 8 with unlocked bootloader without notice from the reseller. The outcome when I updated with miflash was a bricked phone. When I tried to use miunlock I saw a message that my phone is not bound to this account.
Click to expand...
Click to collapse
Mhh... Seems you have used the third option of Mi Flash (clean all and relock).
Have you tried to relock bootloader with China ROM or Global ROM?

Orlaf said:
Mhh... Seems you have used the third option of Mi Flash (clean all and relock).
Have you tried to relock bootloader with China ROM or Global ROM?
Click to expand...
Click to collapse
Nothing seems to work. I can change Roms using adb sideload but the problem is that always is a bootloop.

ekc_1971 said:
Nothing seems to work. I can change Roms using adb sideload but the problem is that always is a bootloop.
Click to expand...
Click to collapse
I haven't understand well.
In pratice you have bricked device, but you can reflash something using adb sideload? ?
Give me details. ?

Orlaf said:
I haven't understand well.
In pratice you have bricked device, but you can reflash something using adb sideload? ?
Give me details.
Click to expand...
Click to collapse
I am using xiaomiadb.exe . You boot in recovery mode and then you drag and drop the rom over xiaomiadb. Pc suit sees the version. I have managed this way to change many roms, but the main problem is the boot loop.

ekc_1971 said:
I am using xiaomiadb.exe . You boot in recovery mode and then you drag and drop the rom over xiaomiadb. Pc suit sees the version. I have managed this way to change many roms, but the main problem is the boot loop.
Click to expand...
Click to collapse
Have you tried to flash a China ROM?

Orlaf said:
Have you tried to flash a China ROM?
Click to expand...
Click to collapse
Yes, I have tried everything I could think of. I am afraid that the only solution is to use Mi unlock, but I can't to that because the reseller send me the phone with unlocked bootloader. The program checks at the begging if I have permissions, then checks if the phone is a Mi 8, it passes that test too, but the message I get then is that this phone is not bound to this account.
---------- Post added at 06:03 PM ---------- Previous post was at 05:53 PM ----------
BigBrunoRamos said:
I have the same question... It's possible change the account used for the bootloader unlock?
Click to expand...
Click to collapse
I have asked Xiaomi Global service about that. They don't offer support. They don't recognize the Chinese e-shops as authorized resellers. And I suppose that a phone can't be bound to two accounts. The only thing I can say for sure is that the global version has a red label on the box and the manual is in English. Watch the video. https://www.youtube.com/watch?v=4Nx-jjTVh_8&t=107s

ekc_1971 said:
Yes, I have tried everything I could think of. I am afraid that the only solution is to use Mi unlock, but I can't to that because the reseller send me the phone with unlocked bootloader. The program checks at the begging if I have permissions, then checks if the phone is a Mi 8, it passes that test too, but the message I get then is that this phone is not bound to this account.
---------- Post added at 06:03 PM ---------- Previous post was at 05:53 PM ----------
I have asked Xiaomi Global service about that. They don't offer support. They don't recognize the Chinese e-shops as authorized resellers. And I suppose that a phone can't be bound to two accounts. The only thing I can say for sure is that the global version has a red label on the box and the manual is in English. Watch the video. https://www.youtube.com/watch?v=4Nx-jjTVh_8&t=107s
Click to expand...
Click to collapse
So it can't be possible to flash anything (also China, that was the born ROM of this phone) with option "Clean all and relock" of Mi Flash, without incurring in a bootloop?

The fact is that you can bound the phone to every account, if you can boot it with locked bootloader.
But if this can't be done, developer options menu will show you that bootloader is already unlocked, without possibility of bound your own account.

Oh wait, you can't use mi flash because your account it's not authorized for EDL.
Now I have understand because you can't relock bootloader. ?

Orlaf said:
Oh wait, you can't use mi flash because your account it's not authorized for EDL.
Now I have understand because you can't relock bootloader.
Click to expand...
Click to collapse
When miunlock starts it checks if I have permission for EDL. It passes the test. But then it says that my phone is not bound to my account. The bootloader was unlocked so I suppose someone has bound my phone with his account.

ekc_1971 said:
When miunlock starts it checks if I have permission for EDL. It passes the test. But then it says that my phone is not bound to my account. The bootloader was unlocked so I suppose someone has bound my phone with his account.
Click to expand...
Click to collapse
Ok, so you can't use Mi Flash.
Now it's all clear.
Thanks for your explanation. ?

I'm having an idea ... My device is about to arrive. It will be a Chinese variant with bootloader unlocked by the store for installation of a global ROM. So if I flashed a Chinese ROM again, I could re-block the bootloader, correct? So I will boot the phone with the blocked bootloader in the Chinese ROM and I can associate my account and unlock the bootloader again, only this time with my own account. Would it work?
Sorry for my english, I'm using the Google Tradutor.

BigBrunoRamos said:
I'm having an idea ... My device is about to arrive. It will be a Chinese variant with bootloader unlocked by the store for installation of a global ROM. So if I flashed a Chinese ROM again, I could re-block the bootloader, correct? So I will boot the phone with the blocked bootloader in the Chinese ROM and I can associate my account and unlock the bootloader again, only this time with my own account. Would it work?
Sorry for my english, I'm using the Google Tradutor.
Click to expand...
Click to collapse
The problem is that you need to bound your account to your Mi 8, otherwise you can't use Mi Flash to relock your phone.
And you also can't lock it by fastboot, because this operation delete recovery and system partitions, generating a total brick.
Unfortunately my current Mi Max 2 was one of these unlucky phones, and I have learn lesson myself.

The best thing that you can do is:
Use last version of Mi PC Suite 3 to flash global and twrp to flash custom, and if you need to return on global from twrp, just flash original Xiaomi recovery and reuse Mi PC Suite 3.

Orlaf said:
Ok, so you can't use Mi Flash.
Now it's all clear.
Thanks for your explanation.
Click to expand...
Click to collapse
Υοu're welcome. It's my first ever Xiaomi but I think that for a while because it's a new phone of the market we must leave it untouched for a while. I mean rooting, custom roms, e.t.c.

ekc_1971 said:
Υοu're welcome. It's my first ever Xiaomi but I think that for a while because it's a new phone of the market we must leave it untouched for a while. I mean rooting, custom roms, e.t.c.
Click to expand...
Click to collapse
Xiaomi has arrived to Europe, but Chinese version still continue to be less expensive (and interesting), but unfortunately not excluded from this type of inconveniences.

Bootloop after recent Android OTA Update

Hello Community,
i have a Problem after the installation of the newest android Update (OTA).
The A2 just Boot till the white AndroidOne Logo and it hangs there after a time it seems it shut down itself.
My Device:
-USB Debugging is disabled, its a new testing device.
-I cant boot in recovery mode (vol-UP+Power) just boots to the white androidOne Screen and there it hangs
- I can enter fastboot(VOL-Down+power) mode and the device is listed when i type fastboot devices in my terminal on pc
- when i fire up MiFlash tool it list my device after clicking refresh, if i want flash the latest FW (http://en.miui.com/download-353.html) i get the error:
error:"Flash bluetooth_a error"
- My bootloader is locked.
Question:
How can I flash a offical Android with a locked bootloader?
is it a good idea? or better send it back for a warranty solution (i dont want wait)
is there another way to solve my problem? i really dont know whats the problem is. i did not rooted the device or anything.
would be lovely if someone could help me. with an instruction what i can try.
Thank you very much and have a nice day
Regards

If you have enabled 'OEM Unlock' setting in Developer settings, you will probably be good, you can unlock bootloader(oem/flashing/critical) and flash the official ROM ( as per now, 10.0.2.0 )
If not, you have 2 options
-Boot into EDL using short points and flash from there
-Warranty
Same thing happened to a friend's phone, it wasn't touched and just went brick after 10.0.2.0 OTA.
Guess everyone should enable 'OEM Unlock' in case this happens(Data Encrypted anyway, worst case stolen phone better than the chance of brick every time an OTA comes)
edit: If you want to save your data, you obviously shouldn't try the bootloader unlock way...EDL flashing allows flashing without wiping data, but haven't tested that personally

wow really? that are bad news...
thank you anyway :crying:
maybe someone other got a idea?
regards

Lot of users faced this after today's update including myself. Since my bootloader is locked, only option left is EDL flashing by connecting motherboard test points.

Just an advice for everyone reading this message from a Xiaomi Android One device: ALWAYS KEEP UR BOOTLOADER UNLOCKED, IT DOESNT MATTER IF USB DEBUG ISNT ACTIVE, JUST UNLOCK BOOTLOADER
sorry for caps, is just an important thing, i also had the issue but with unlocked bootloader i solved it easily

Just flash using fastboot
Sent from my LG-V930 using Tapatalk

Abrilabr said:
Just an advice for everyone reading this message from a Xiaomi Android One device: ALWAYS KEEP UR BOOTLOADER UNLOCKED, IT DOESNT MATTER IF USB DEBUG ISNT ACTIVE, JUST UNLOCK BOOTLOADER
sorry for caps, is just an important thing, i also had the issue but with unlocked bootloader i solved it easily
Click to expand...
Click to collapse
Yea, but if you want use it as enterprise Device the open Bootloader is a problem.
ilyas111 said:
Just flash using fastboot
Sent from my LG-V930 using Tapatalk
Click to expand...
Click to collapse
that seems not possible with a locked Bootloader (very new phone)
or can you provide a working solution with a locked bootloader? i wont use this EDL thing because its just new and i dont want open it.
Thank you all anyways

Try with this tool : https://forum.xda-developers.com/mi-a2/development/tool-mi-a2-xtrem-toolkit-t3879660
(edl included)

Same trouble here, we are fu...ed!

With Xiaomi mi flash tool, you can re active bootloader protection !
Simple flash with this tool with the option "clean and lock critical"
Works for me !

xotob said:
With Xiaomi mi flash tool, you can re active bootloader protection !
Simple flash with this tool with the option "clean and lock critical"
Works for me !
Click to expand...
Click to collapse
you had bootloader unlocked, i dont, i cant flash nothing with bootloader locked and i have unchecked the option in debug menù.

Reptant said:
If you have enabled 'OEM Unlock' setting in Developer settings, you will probably be good, you can unlock bootloader(oem/flashing/critical) and flash the official ROM ( as per now, 10.0.2.0 )
If not, you have 2 options
-Boot into EDL using short points and flash from there
-Warranty
Same thing happened to a friend's phone, it wasn't touched and just went brick after 10.0.2.0 OTA.
Guess everyone should enable 'OEM Unlock' in case this happens(Data Encrypted anyway, worst case stolen phone better than the chance of brick every time an OTA comes)
edit: If you want to save your data, you obviously shouldn't try the bootloader unlock way...EDL flashing allows flashing without wiping data, but haven't tested that personally
Click to expand...
Click to collapse
After got OTA update to 10.0.3.0 and Today i try to unlock bootloader but I can't unlock_critical and I can't flashing unlock

boonc said:
After got OTA update to 10.0.3.0 and Today i try to unlock bootloader but I can't unlock_critical and I can't flashing unlock
Click to expand...
Click to collapse
Same problem here, does anyone have a solution?

Does fastboot mode is detected in pc?
Sent from my MI 6X using Tapatalk

ilyas111 said:
Does fastboot mode is detected in pc?
Sent from my MI 6X using Tapatalk
Click to expand...
Click to collapse
yes, but i cant use more of fastboot comands, cause bootloader is locked, cant use "flashing unlock/unlock_critical"

Cizzle4 said:
you had bootloader unlocked, i dont, i cant flash nothing with bootloader locked and i have unchecked the option in debug menù.
Click to expand...
Click to collapse
I'm in your same situation

Exactly the same situation here... Waiting for a solution without losing warranty.

I think if your bootloader is not unlocked, the only possible solution left is to shorting the test points on motherboard. Those who have warranty can return the unit for claim. Yet another mess up from Xiaomi and this will be my last phone from them.

UnlimitedBB said:
I think if your bootloader is not unlocked, the only possible solution left is to shorting the test points on motherboard. Those who have warranty can return the unit for claim. Yet another mess up from Xiaomi and this will be my last phone from them.
Click to expand...
Click to collapse
I can understand that. I will claim warranty because its new and i dont want do that test point thing.
on private i would buy and recommend xiaomi anyways but if you want these hardware for some enterprise things then better not.
Iam out of this Thread now but if you want talk here some more feel free.. maybe somebody can bring a solution for all you guys who face this problem but i think its not possible without a open BL or the TestPoint Method.
Regards and have a nice day

Hi. I'm with locked bootloader. I received new January update. No change - stock variant updated to Pie. So it's safe to update or waiting for new one? Mi A2 4/64 micron ram

Xiaomi mi 9 bricked

Hi, guys. Such an unpleasant thing happened to me today. I have received my new xiaomi mi 9... But it has came with unlocked bootloader so i have locked it. And when i locked it then the phone got stuck on the recovery mode saying "this miui version can't be installed on this device" but it already came with this MIUI i did not change nothing i just wanted to lock the bootloader. Now i am bricked and i can't do nothing, i have tried to wipe all data, but did not help...
Does anybody know what can i do in this case?

TommyKing18 said:
Hi, guys. Such an unpleasant thing happened to me today. I have received my new xiaomi mi 9... But it has came with unlocked bootloader so i have locked it. And when i locked it then the phone got stuck on the recovery mode saying "this miui version can't be installed on this device" but it already came with this MIUI i did not change nothing i just wanted to lock the bootloader. Now i am bricked and i can't do nothing, i have tried to wipe all data, but did not help...
Does anybody know what can i do in this case?
Click to expand...
Click to collapse
Follow these guides:
https://forum.xda-developers.com/Mi-9/how-to/unlocking-bootloader-immediately-t3926424
https://forum.xda-developers.com/Mi-9/how-to/guide-how-flashed-twrp-xiaomi-eu-rom-t3912952

reply
Laptapper said:
Follow these guides:
https://forum.xda-developers.com/Mi-9/how-to/unlocking-bootloader-immediately-t3926424
https://forum.xda-developers.com/Mi-9/how-to/guide-how-flashed-twrp-xiaomi-eu-rom-t3912952
Click to expand...
Click to collapse
Thank you very much for help. I have read both but unfortunately i can not UNLOCK my bootloader… when i was trying to unlock the bootloader through MI UNLOCK, it says "Current account is not bound to this device". Otherwise if this was succesful and i could unlock it, then it would be easy i believe.

F
F in the chat

Since you locked the boot loader, you'd have to flash (with fastboot) using the same flavor of miui which was installed. (example: chinese or eu variation), otherwise you won't be able to boot.

NikoSpeed said:
F in the chat
Click to expand...
Click to collapse
you think you would know what to do?

nahsha said:
Since you locked the boot loader, you'd have to flash (with fastboot) using the same flavor of miui which was installed. (example: chinese or eu variation), otherwise you won't be able to boot.
Click to expand...
Click to collapse
Yes, that i understood… There was EU variation with unlocked bootloader, which i do not know why, but okay…
But now i can not unlock it, it says, when i try to unlock it though fastboot with mi unlock, it says "Current acount is not bound to this device, ADD your acount and device in MIUI"s setting > developer options> mi unlock status.. but obviously i can not do it since i can not turn on my phone, its stuck on recovery mode.

TommyKing18 said:
Yes, that i understood… There was EU variation with unlocked bootloader, which i do not know why, but okay…
But now i can not unlock it, it says, when i try to unlock it though fastboot with mi unlock, it says "Current acount is not bound to this device, ADD your acount and device in MIUI"s setting > developer options> mi unlock status.. but obviously i can not do it since i can not turn on my phone, its stuck on recovery mode.
Click to expand...
Click to collapse
Try recovering using this: https://www.xiaomitool.com/V2/

nahsha said:
Try recovering using this: https://www.xiaomitool.com/V2/
Click to expand...
Click to collapse
When i choosed "my device is bricked i want to unbrick it" it says, this option is not available yet..

I can help you
First of all you need chinese mi assistant
Second you need try three versions of roms(eeu , china , global) but im pretty sure that your phone is chinese version that bought from gray market and they unlock bootloader to install global rom
After you download these tell me, i guide you
Be sure download recovery rom (not fastboot)
It has .zip extension not tgz

emprazol said:
I can help you
First of all you need chinese mi assistant
Second you need try three versions of roms(eeu , china , global) but im pretty sure that your phone is chinese version that bought from gray market and they unlock bootloader to install global rom
After you download these tell me, i guide you
Be sure download recovery rom (not fastboot)
It has .zip extension not tgz
Click to expand...
Click to collapse
Thanks a lot, i aprreciate your help! Now i am downloading Chinese ROM recovery ROM, chinese mi assistant i have already so let's see, i hope it will work.

TommyKing18 said:
Thanks a lot, i aprreciate your help! Now i am downloading Chinese ROM recovery ROM, chinese mi assistant i have already so let's see, i hope it will work.
Click to expand...
Click to collapse
If you know how to sideload the rom then everything is become okay dont worry
After successful debrick you must bound you mi account to your phone and wait for bl unlock then reflash with mi flash tool and global rom
AND DONT LOCK YOUR BOOTLOADER AGAIN

Yes, unfortunately i do not know how to sidload the rom... But when i have Chinese rom downloaded then what do i do with that? I connect the phone through mi assistant and there it can be flashed?

I had the same thing happen. You need to force a firmware flash ?
I had someone on xda recommend an excellent recovery tool.
It's called 'miflashpro'. It can be hard to find the English version. I did eventually but actually unbricked my Mi9 with the Italian version.
99% chance your cell can be fixed this way

bricked too
I'm having the same problem here, after wipe in twrp mode my phone restart and i'm blocked on bootloader screen.

Bryceicle1971 said:
I had the same thing happen. You need to force a firmware flash ?
I had someone on xda recommend an excellent recovery tool.
It's called 'miflashpro'. It can be hard to find the English version. I did eventually but actually unbricked my Mi9 with the Italian version.
99% chance your cell can be fixed this way
Click to expand...
Click to collapse
I am having the same probelm. .i have accidently locked the bootloader and now stuck in recovery loop. And can not unlock bootloader as i didnt bind my account. Can u plz share the link of miflashpro

That's so unfortunate

TommyKing18 said:
Yes, unfortunately i do not know how to sideload the rom... But when i have Chinese rom downloaded then what do i do with that? I connect the phone through mi assistant and there it can be flashed?
Click to expand...
Click to collapse
I did the same thing with a Mi CC9 relocked the bootloader by mistake thinking it was like any other android phone. Did you have a Xiaomi account associated with the phone and signed into after enabling oem unlock in developer options.
If tha'ts the case you can use https://en.miui.com/unlock/ tool from where but it checks your phone number to see whether its associated with mi unlock.
Otherwise you will have to use EDL method which involves disassembling back of phone and shorting out two pins to initialize EDL data transfer but you need a EDL associated account this (belief xiaomi has revoked everyone access to these)

Hello all members.I had same problem and I open this phone with suport from youtube .I try clean some connector and worming cpu and motherboard. After change the battery with new. When close the phone they suprised me and working good.After 10 hours again close and bricked. I try sake and again open .So....the real problem its not CPU and motherboard but some connector dont touch good. Sory for my English. I hope some other find which connector have problem in this phone and pm me. Now my MI 9 working good but I keep bickerful ...

Strange MI Unlock error | BL locked and system destroyed

Hi Guys,
Everything went wrong today. At the end i went to the point where i myself locked bootloader with fastboot. Want to unlock it again but this strange error appeared:
https://imgur.com/qBNM4ah
Does anyone know what this means? Phone is locked, can only go into fastboot.

Same here. My dumbass thought it would be a good idea to lock the bootloader (don't ask why because I don't even know the answer). System is destroyed and can only boot to fastboot. No Mi ID associated with it.

KaiseRRUby said:
system destroyed
Does anyone know what this means? Phone is locked, can only go into fastboot.
Click to expand...
Click to collapse
system destroyed happens when you lock bootloader on Chines device with global ROM. You get it when you trying to boot in system?

g_seva said:
system destroyed happens when you lock bootloader on Chines device with global ROM. You get it when you trying to boot in system?
Click to expand...
Click to collapse
No. It's a global device. I have even put that **** in EDL mode and tried to flash the damn thing. EDL authentication failed. I have no clue what the do next.

kaydentc1 said:
No. It's a global device. I have even put that **** in EDL mode and tried to flash the damn thing. EDL authentication failed. I have no clue what the do next.
Click to expand...
Click to collapse
For EDL flash you need xiaomi authorized account, there is rumors that some Indians make EDL flash with remote connection and their authorized account for 12$. Try to search in google or if you have a xiaomi seller or official repair in your home town, check there how much it will cost you.
You sure you have a global version? Were you bought the phone? Was it with locked or unlocked bootloader and what ROM was on it? Because some sellers, mostly on aliexpress and similar, just unlock bootloader on Chines devices, flash a global ROM and call it global version.

From the image attached, it looks like someone used the Find Device feature and activated Lost Mode. Is the Mi account number shown yours?

g_seva said:
For EDL flash you need xiaomi authorized account, there is rumors that some Indians make EDL flash with remote connection and their authorized account for 12$. Try to search in google or if you have a xiaomi seller or official repair in your home town, check there how much it will cost you.
You sure you have a global version? Were you bought the phone? Was it with locked or unlocked bootloader and what ROM was on it? Because some sellers, mostly on aliexpress and similar, just unlock bootloader on Chines devices, flash a global ROM and call it global version.
Click to expand...
Click to collapse
Bought it from Amazon. It was global. I had to wait for about 7 days to unlock the bootloader