Related
Hello today I am going to share you how to install stock rom in asus zenfone 4 using raw file
first you must install these :
Intel Usb Driver: http://d-h.st/VfO
Asus Flash Tool Installer: https://yadi.sk/d/K5UINtv9e9ehP
Asus zenfone 4 raw file: http://www.mediafire.com/download/prtp8p7ok6s9izf/Zenfone+4+V4.3.10.raw
After you install, follow my steps carefully
1.boot your phone into droidboot by pressing power + vol up
2.In your pc open asus flash tool
3.In asus flash tool choose model (P400CG) Wipe data (yes) and choose the raw file
http://s10.postimg.org/7ybzsv0xl/Step_1.jpg
4.plug your phone to your pc/laptop
5.after you plug your phone you will see a serial number , and click your device
http://s30.postimg.org/729moup4h/Step_2.jpg
6.start flashing
http://s27.postimg.org/shru3ater/Step.jpg
7.after flashing ,your phone will automatically reboot
8.Enjoy
Thanks guys
or just place raw file in ext sd card and perform SD download from droidboot
Yep..
Sent from my ASUS_T00I using XDA Free mobile app
Cant make use of AFT
I am unable to select the downloaded .raw file in AFT.
the only supported formats are .img or .zip
how can I flash the stock .raw file.
nor the SD DOWNLOAD in Droidboot mode recognizes this raw.file
I have tried to download it more than 4 times thinking that file might have currupt. but same result every time.
Please help
Edit:
anyways I got to learn how to select the file but now when I connect my device to PC in droidboot mode, error message pops asking to close AFT. I can Ignore the error msg to keep it running but No device is being detected in AFT.
That error comes every time I connect or remove device from PC.
This is where I need help.
or simple suggest me a full solution o below situation:
Device ASUS ZENFONE 4_T00I
Last working firmware was Jellybean 4.2.2 (never upgraded)
Problem started: Consistent FC msgs of almost all msgs.
1. Droidboot State
Droidboot Version: 6.6.3.0
Product : WW_ZENFON
Not Rooted. No Custom Recovery
2. Device Status: Was on Stock Jelly bean and was contineously giving com.android.phone failure and other FC closure consistently , hence needed to try flasing a new rom or same version.
3. Read the forums and collected following data:
Stock Firmwares:
UL-ASUS_T00I-WW-6.6.3.0_user.zip
UL-ASUS_T00I-WW-7.4.4.0-user.zip
UL-ASUS_T00I-WW-9.9.9.0-user
Raw Firmware:
Zenfone4V4.3.10.raw
4. All the Tools required to flash the firmwares and study of methods to do so. I used WIN-XP and tools installed on the same. All Drivers installed successfully device recognizing and able to use fastboot and adb.
5.Current device status: To flash UL-ASUS_T00I-WW-6.6.3.0_user.zip
I tried following methods :
FW placed on SD Flashing started but failed everytime
Tried Fastboot flash update FW.zip method by cleaning all partitions- Failed "Problem in creating otp update file-error)
Now left with no system, no userdata or no data partitions on device.
Now trying AFT method to flash .raw firmware which I have downloaded.
AFT not at all listing up my device in Droidbot mode.
VioletR said:
I am unable to select the downloaded .raw file in AFT.
the only supported formats are .img or .zip
how can I flash the stock .raw file.
nor the SD DOWNLOAD in Droidboot mode recognizes this raw.file
I have tried to download it more than 4 times thinking that file might have currupt. but same result every time.
Please help
Edit:
anyways I got to learn how to select the file but now when I connect my device to PC in droidboot mode, error message pops asking to close AFT. I can Ignore the error msg to keep it running but No device is being detected in AFT.
That error comes every time I connect or remove device from PC.
This is where I need help.
or simple suggest me a full solution o below situation:
Device ASUS ZENFONE 4_T00I
Last working firmware was Jellybean 4.2.2 (never upgraded)
Problem started: Consistent FC msgs of almost all msgs.
1. Droidboot State
Droidboot Version: 6.6.3.0
Product : WW_ZENFON
Not Rooted. No Custom Recovery
2. Device Status: Was on Stock Jelly bean and was contineously giving com.android.phone failure and other FC closure consistently , hence needed to try flasing a new rom or same version.
3. Read the forums and collected following data:
Stock Firmwares:
UL-ASUS_T00I-WW-6.6.3.0_user.zip
UL-ASUS_T00I-WW-7.4.4.0-user.zip
UL-ASUS_T00I-WW-9.9.9.0-user
Raw Firmware:
Zenfone4V4.3.10.raw
4. All the Tools required to flash the firmwares and study of methods to do so. I used WIN-XP and tools installed on the same. All Drivers installed successfully device recognizing and able to use fastboot and adb.
5.Current device status: To flash UL-ASUS_T00I-WW-6.6.3.0_user.zip
I tried following methods :
FW placed on SD Flashing started but failed everytime
Tried Fastboot flash update FW.zip method by cleaning all partitions- Failed "Problem in creating otp update file-error)
Now left with no system, no userdata or no data partitions on device.
Now trying AFT method to flash .raw firmware which I have downloaded.
AFT not at all listing up my device in Droidbot mode.
Click to expand...
Click to collapse
You need AFT version 1.0.0.0 for RAW files. See here: http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=3567
Solved
I flashed v6.3.5.0.img.gz successfully using droidboot.
Thanx a lot.
Now i an on Lollipop v7.4.4.0 thanx for all help
Solved
Root
Does it require root permissions ? Because i have heard that flasing like this can burn the motherboard please tell ... :crying::crying:
No it can if u flash it 100or200 times
I jab flashed roms in my ZenFone 400cg 90 to 110 times either cm or zenui.. lol... nothing happened
Sent from my ASUS_T00I using XDA Free mobile app
thank you so much Techjohn9 and other guys, this thread is really helpfull...
but my navigation buttons (home, back and window toggle) are not working......
please suggest me some solutions ...
I'm using Asus zenfone 4 a400cg mobile droid version 6.6.3 WW I downloaded UL Asus tool firmware 6.6.3 WW and tried to flash error msg coming like image SKU is not match help me to solve this problem
I actually downgraded from lollipop to jellybean,flashing was successful. But the problem is now the back,home and multitask touchpads are not working. It was working fine in the lollipop version, i don't know what happened. Please help me...
I've the same problem. Do you have any remedy?
VioletR said:
I flashed v6.3.5.0.img.gz successfully using droidboot.
Thanx a lot.
Now i an on Lollipop v7.4.4.0 thanx for all help
Solved
Click to expand...
Click to collapse
Give me img v6.3.5, Please.
No man it is not working this time my mobile got stuck in bootloop
Update
mrvj123 said:
thank you so much Techjohn9 and other guys, this thread is really helpfull...
but my navigation buttons (home, back and window toggle) are not working......
please suggest me some solutions ...
Click to expand...
Click to collapse
Update your Asus Zenfone 4 > UL-ASUS_T00I-WW-6.6.3.0-user :laugh: :good:
mrvj123 said:
thank you so much techjohn9 and other guys, this thread is really helpfull...
But my navigation buttons (home, back and window toggle) are not working......
Please suggest me some solutions ...
Click to expand...
Click to collapse
bro u got any fix?
The links in the OP are absolute poison!
Are the files available from any other source?
Where can I find ASUS_BUNDLE.ZIP which droidboot requires?
Hello ! I've tried to unlock bootloader at first and succeeded in that when i was on the lollipop . Unlocking is done by the unlock tool provided by the ASUS Officials.
Then i flashed the cynogen 12.1 unofficial via a boot.img , atwrp v3.img & a system.img.
Everything was fine until i needed to revert back to stock firmware.
And also everytime when i try to boot into recovery via Power & volume (-) button , it boots into system.
I used "adb reboot recovery" to boot into twrp recovery .
So, to revert back i saw a method in which we flash a raw firmware , and i downloaded a 4.0.3 for Asus Zenfone 4.
But after flashing it , the bootloader i unlocked , got locked by itself (means i can open droid boot but cannot modify boot and recovery partition via "fastboot flash boot boot.img" & "fastboot flash recovery recovery.img" ).
I can only flash system via " fastboot flash system system.img".
I tried to unlock it on Jelly Bean but no success.
Also i tried updating the firmawre via OTA and flashing zip in recovery mode but i was not able to boot into recovery mode, even with "adb reboot recovery".
It always ends up with a reboot , then booting into a 'Android logo for 200 to 300 millisec' , & then boot into system.
Then i found a KitKat firmware raw file , but when i flashed it via AFT 1.0.0.0 , it always gives error "no space left for flashing modem binary".
I tried "fastboot erase data" ,"fastboot erase userdata" ,"fastboot erase cache" , & "fastboot erase system" , but ended up with stock rom with no modem binary.
So , i tried to unlock the bootloader again by the "unlock tool" provided by ASUS , but even after connected to a high speed Wifi , It gives connection error and rest of the other things are working fine like browser etc.
I also tried to flash the modem.zip inside the stock firmware zip via fastboot as : "fastboot flash update modem.zip. It has flashed the zip but still no modem binary.
Then i tried to flash the bin file inside the modem.zip as : fastboot flash radio radio_firmware.bin and it gives error : No space left for flashing modem binary.
Now i have a bootloader (locked) but no recovery and a stock firmware with no modem binary.
Cn to ww
Hello, I have a big issue with my zenfone4 max plus zc550tl. I received the phone with a CN rom and after update to new version I lost all languages except chinese and english and every google apps. Someone can help me? I need to change my rom from CN to WW or to recovery old Rom 18. Help!!
AlfredDispi said:
Hello, I have a big issue with my zenfone4 max plus zc550tl. I received the phone with a CN rom and after update to new version I lost all languages except chinese and english and every google apps. Someone can help me? I need to change my rom from CN to WW or to recovery old Rom 18. Help!!
Click to expand...
Click to collapse
This forum is only for Asus Zenfone 4 A400CG and A450CG; which is a 4 year old device; and should not be confused with the new Zenfone 4(s).
Hello everybody. As the question title states I've been facing Invalid IMEI error and NVRAM warning after unbricking a Lenovo K3 Note, it got bricked when flashing a rom without root. Could anyone kindly guide me through the process to fix those errors? I'd like to just flash the firmware through SP Flash Tool but I still couldn't find any ROM that is flashable through SP Flash Tool and that doesn't fixes those two errors.
I've tried IMEI/SN Writer and Maui Tool with no luck, the process stops in the meta mode.
Try chameleon from play store
After flashing to "Infinix rom 5.1 for HOT2" from the infinix website (using infinix flash tool) my phone wont turn on.
The flashing was completed succesfully.
what to do, anyone can help me?
ps: my phone came with android one
Try to flash the preloader of the rom you are coming from, ie if it is android one 5.1 or 6.0 just extract the preloader and flash it. Preloader only!
thx for advice:good:
when i Try to flash the preloader of the rom . it give me a message { PMT changed for the ROM it must be download}
Gwumex said:
Try to flash the preloader of the rom you are coming from, ie if it is android one 5.1 or 6.0 just extract the preloader and flash it. Preloader only!
Click to expand...
Click to collapse
when i Try to flash the preloader of the rom . it give me a message { PMT changed for the ROM it must be download}
waleedizer said:
when i Try to flash the preloader of the rom . it give me a message { PMT changed for the ROM it must be download}
Click to expand...
Click to collapse
Also try the scatterfile of the rom you are coming from, if you havent tried it, if that doesnt work try using format all+download in the spflashtools. It will be preferable to use the preloader for a 6.0, whatsapp me on +2348144196054 if you have any problem, causw am not always logged on to this website
V2056A | PD2056 | 5G China variant
- PD2056B_A_1.11.13 HERE Android 11
thats good!
and how can i flash it?
My device is last week broken . is the rom flashable with fastboot? thx mike
How did you broken the device?
You can simply upload zip on device with adb command and flash by using stock recovery mode
adb push .....
I tried to flash my patched boot.img (via_magisk) with the MTKROOT V2.5.5 tool. -https://www.ayudaroot.com/root/vivo/como-rotear-los-telefonos-vivo-x60-pro-plus . The first problem was unlocking the bootloader. That did not make the tool. The tool failed .. I unlocked that manually in fastboot mode. After the bootloader was open, I tried the tool for the second time.
That was probably the serious mistake! The tool has transferred the patched boot img. So far everything was o. K. Then I booted to the Recovery Menu to clean the data and cache partition. (Factory Reset). Then restart system. Since then I have a bootloop and it was not possible to boot into recovery mode.
Then I flashed from the Indian Rom the boot and the recovery image.
Now the device booted again in Indian Recovery Mode (English). Then I tried to execute the recovery WLAN update. Unfortunately, the system has found no access points when searched.
!! F *** K !!
The next day I tried to flash the original CN-ROM with the QPST flashtool from https://www.needrom.com/download/vivo-x60-pro-plus/ ..
Here I had problems installing the Qualcomm driver for the EDL download mode or to boot the device in the EDL mode.
Without success!
Finally, I tried to flash all the items of the CN-ROM from Needrom via Fastboot. The Flash order of the items I had from the partition.xml file on the CN-ROM.
But I still have a bootloop ..
No access to the recovery WLAN Update-No networks are displayed ..
Do you have an idea for the EDL download mode?
88user88 said:
I tried to flash my patched boot.img (via_magisk) with the MTKROOT V2.5.5 tool. -https://www.ayudaroot.com/root/vivo/como-rotear-los-telefonos-vivo-x60-pro-plus . The first problem was unlocking the bootloader. That did not make the tool. The tool failed .. I unlocked that manually in fastboot mode. After the bootloader was open, I tried the tool for the second time.
That was probably the serious mistake! The tool has transferred the patched boot img. So far everything was o. K. Then I booted to the Recovery Menu to clean the data and cache partition. (Factory Reset). Then restart system. Since then I have a bootloop and it was not possible to boot into recovery mode.
Then I flashed from the Indian Rom the boot and the recovery image.
Now the device booted again in Indian Recovery Mode (English). Then I tried to execute the recovery WLAN update. Unfortunately, the system has found no access points when searched.
!! F *** K !!
The next day I tried to flash the original CN-ROM with the QPST flashtool from https://www.needrom.com/download/vivo-x60-pro-plus/ ..
Here I had problems installing the Qualcomm driver for the EDL download mode or to boot the device in the EDL mode.
Without success!
Finally, I tried to flash all the items of the CN-ROM from Needrom via Fastboot. The Flash order of the items I had from the partition.xml file on the CN-ROM.
But I still have a bootloop ..
No access to the recovery WLAN Update-No networks are displayed ..
Do you have an idea for the EDL download mode?
Click to expand...
Click to collapse
My PC is over adb unautorized, after the Factory reset...
I managed to get this full rom from Recovery, there is a option to download the full last rom and burn. I use another phone with photo google translator to navegate in the menu.
I know this option with the update from the WLAN - but this option is no longer available to me - after the search for a network is completed, no further networks are displayed. He doesn't find any networks.
And the second problem was - I cannot import this Update.zip into the main directory because the PC is unauthorized.
It wasn't just the MTK tool that was wrong.
I think our mistake was you mixed recovery and boot of another Rom. I did that many years ago with Huawei but for me it was a hard brick. Better not mix!
yes i think thatat too. first step now- i try to put the phone in EDL download mode. Then I could try the Qualcomm Flash Tool -. .. But thank you anyway.
with which command did you unlocked the bootloader? I can't find a way.
@88user88 : i wish you the best.
Do you see a way to flash the indian ROM?
Question was not for me but:
I think i have a way that works. But for that I need the command to unlock the bootloader. Because none of the normal ones works.
DPMDP said:
with which command did you unlocked the bootloader? I can't find a way.
Click to expand...
Click to collapse
+1
wolfgart said:
V2056A | PĐ2056 | Biến thể 5G Trung Quốc
- PD2056B_A_1.11.13 TẠI ĐÂY Android 11
Click to expand...
Click to collapse
hello i am a new user in vietnam, can you guide me in detail how to install . Thank you very much
I spent almost 5 hrs yesterday tried to flash from CN ROM, Origin OS to Global ROM, FunTouch OS. I used several methods including AFTool, QFIL, and QPST tool. None of them succeed.
AFTool - failed to flash because missing Fastboot batch file in the global firmware.
QFIL - failed to flash because, Qualcomm Driver 9808 not detected.
QPTS - failed to flash because, Qualcomm Driver 9808 not detected.
I like Origin OS but the reason I want to change to FunTouch OS is because Origin OS didn't come with Google Mobile Seevice package. In fact, 'Hey Google' also didn't worked out.
DPMDP said:
Question was not for me but:
I think i have a way that works. But for that I need the command to unlock the bootloader. Because none of the normal ones works.
Click to expand...
Click to collapse
OK, if we manage to restore my device, I'll give you instructions on how you can unlock your bootloader. then at least I know that in an emergency you also have the option to restore your device.
otherwise it would be too unsafe for me ...
ok?-now you come!
astrofahim said:
I spent almost 5 hrs yesterday tried to flash from CN ROM, Origin OS to Global ROM, FunTouch OS. I used several methods including AFTool, QFIL, and QPST tool. None of them succeed.
AFTool - failed to flash because missing Fastboot batch file in the global firmware.
QFIL - failed to flash because, Qualcomm Driver 9808 not detected.
QPTS - failed to flash because, Qualcomm Driver 9808 not detected.
I like Origin OS but the reason I want to change to FunTouch OS is because Origin OS didn't come with Google Mobile Seevice package. In fact, 'Hey Google' also didn't worked out. YouTube Vanced also always failed to open.
Click to expand...
Click to collapse
same here, my device is iqoo 7 cn origin os i downloaded from android 12 website, failed to upgrade in recovery mode when in hardware check.
both on funtouch os and android 12
Hi, does anyone know where it is I can find this PD2056C_A_1.14.1 firmware
the command menu of the recovery mode of the Chinese version and in Chinese or English
Hello community,
I need to install a MIUI OTA Zip file via adb sideload on my Xiaomi Redmi Note 10S (model number M2101K7BNY). The device has been bricked after a Xiaomi security update and is only booting into recovery menu.
I need MIUI 12.5 EU ROM. The relevant OTA file should have the file identifier RKLEUXM.
By now I tried about 10 Zip files via the the tools Xiaomi ADB and ADB 1.3 from XDA Developers. My system is WIndows 11 and virus scan as well as the firewall is disabled.
I use the original Xiaomi USB cable and tried the other USB ports on the system.
It doesn’t make a difference if the SD card is inserted or not.
The bootloader is NOT unlocked.
The device is recognized via the command adb devices in sideload mode.
I type
adb sideload_miui <name of MIUI Zip file> respectively
adb sideload <name of MIUI Zip file>
and Window command line informs me that the file is transferred to the device shortly and the device is rebooting. Sometimes I get the error "failed to read command: no error"
I always tried the MIUI recovery zip versions from the official Xioami sites.
The Xiaomi support couldn’ t help me.
Does anybody know about such a problem and could recover a bricked device via adb sideload without loosing data ?
If I use a wrong Zip file - via adb sideload - which can’t be installed logically will the existing Android system be overwritten and corrupted so that I can’ t update it via the correct OTA Zip file afterwards or is nothing changed in the existing system ?
Is adb sideload the only chance to recover a bricked device with original Xiaomi ROM and locked bootloader without loosing data ?
Can I flash the ROM via fastboot mode with locked bootloader without overwriting the internal storage ?
Is there a special MIUI ROM for Germany ? I always tried it with the EU version but no Zip file is transferred respectively installed on the device.
Kind regards
comanderr said:
Hello community,
I need to install a MIUI OTA Zip file via adb sideload on my Xiaomi Redmi Note 10S (model number M2101K7BNY). The device has been bricked after a Xiaomi security update and is only booting into recovery menu.
I need MIUI 12.5 EU ROM. The relevant OTA file should have the file identifier RKLEUXM.
By now I tried about 10 Zip files via the the tools Xiaomi ADB and ADB 1.3 from XDA Developers. My system is WIndows 11 and virus scan as well as the firewall is disabled.
I use the original Xiaomi USB cable and tried the other USB ports on the system.
It doesn’t make a difference if the SD card is inserted or not.
The bootloader is NOT unlocked.
The device is recognized via the command adb devices in sideload mode.
Click to expand...
Click to collapse
You cannot flash a rom as long as the bootloader is locked,whatever the method.
Erase your data with recovery and see if it restarts.
use MTKCLIENT to unlock the bootloader and flash fastboot rom from there
or use spflashtool
NOSS8 said:
You cannot flash a rom as long as the bootloader is locked,whatever the method.
Erase your data with recovery and see if it restarts.
Click to expand...
Click to collapse
Thanks a lot for your information !
I found information on various sites that it is possible to install an OTA recovery zip file from Xiaomi via adb sideload without loosing data when bootloader is locked. I need to install the latest MIUI OTA zip file (current official MIUI security update - no custom ROM).
As far as I know adb sideload is the only chance to recover a bricked device without loosing data.
Please correct me if I have wrong information.
According to your first post you have already tried this method and it did not work.
the first thing to try is to erase the data with the recovery.
try with this tool,choose bricked device.
https://www.xiaomitool.com/V2/latest
Sorry for my late response.
I made several attempts with different tools. Xiaomi V2Tool detected the MIUI EU version 12.5.16.0 on the device but flashing via this tool overwrites all data of the internal storage.
After installing MTK drivers the device is detected in fastboot mode. I also installed Android USB drivers.
I tried MiFlash from Xiaomi and SPFlash tool from MTK but none of them recognizes the device in fastboot mode. It seems that a special driver is missing but I couldn' t find them. I don't understand this because adb tools can access the device via fastboot mode.
It seems that adb sideload doesn' t work since the device is locked by the chip manufacturer MTK. Therefore it isn' t possible to access the internal storage.
Has anyone experience concerning these problems or can confirm this system behaviour ?
Does anybody know these two flash tools and knows which requirements have to be fulfilled that the device is recognized through these flash tools ?
My only request is that I can access the internal storge via a Windows PC without a running Android system.
comanderr said:
Sorry for my late response.
I made several attempts with different tools. Xiaomi V2Tool detected the MIUI EU version 12.5.16.0 on the device but flashing via this tool overwrites all data of the internal storage.
After installing MTK drivers the device is detected in fastboot mode. I also installed Android USB drivers.
I tried MiFlash from Xiaomi and SPFlash tool from MTK but none of them recognizes the device in fastboot mode. It seems that a special driver is missing but I couldn' t find them. I don't understand this because adb tools can access the device via fastboot mode.
It seems that adb sideload doesn' t work since the device is locked by the chip manufacturer MTK. Therefore it isn' t possible to access the internal storage.
Has anyone experience concerning these problems or can confirm this system behaviour ?
Does anybody know these two flash tools and knows which requirements have to be fulfilled that the device is recognized through these flash tools ?
My only request is that I can access the internal storge via a Windows PC without a running Android system.
Click to expand...
Click to collapse
you can't use spflash in fastboot. you need to enter bootrom mode
Can you tell me how I can enter the bootrom mode ? I can’t find any information about that.
I tried SP flash and MI flash in fastboot mode. Both tools don’ t transfer the Xiaomi Stock ROM MIUI version 12.5.16.0 or 12.5.17.0 to the device. Does it fail due to the locked bootloader ?
The device rebooted suddenly while I tried to transfer the official zip file from Xiaomi via adb sideload.
Is the device locked against all flashing operation by the chip manufacturer Mediatek ?
I also tried the MTK auth bypass tool which should release the lock from Mediatek but also this tool couldn‘ t do any operation onto the device.
Has anyone information about locked sectors of the Xiaomi Redmi Note 10s ? It seems that no modification is allowed.
comanderr said:
Can you tell me how I can enter the bootrom mode ? I can’t find any information about that.
I tried SP flash and MI flash in fastboot mode. Both tools don’ t transfer the Xiaomi Stock ROM MIUI version 12.5.16.0 or 12.5.17.0 to the device. Does it fail due to the locked bootloader ?
The device rebooted suddenly while I tried to transfer the official zip file from Xiaomi via adb sideload.
Is the device locked against all flashing operation by the chip manufacturer Mediatek ?
I also tried the MTK auth bypass tool which should release the lock from Mediatek but also this tool couldn‘ t do any operation onto the device.
Has anyone information about locked sectors of the Xiaomi Redmi Note 10s ? It seems that no modification is allowed.
Click to expand...
Click to collapse
https://forum.xda-developers.com/f/redmi-note-10s.12317/?prefix_id=37
J6idot said:
use MTKCLIENT to unlock the bootloader and flash fastboot rom from there
or use spflashtool
Click to expand...
Click to collapse
Only for mediatek and not snapdragon
Ali041711 said:
Only for mediatek and not snapdragon
Click to expand...
Click to collapse
Xiaomi Redmi Note 10S (model number M2101K7BNY)
MediaTek Helio G95