Database Develop

Lenovo K3 Note Bricked and SPFlash tool Not working.

My Lenovo K3 note bricked and now it boots up to spash logo and says dl image error or something. Downloaded the stock rom and tried the spflash tool but it doesnt seems to work. Please help.
e
Download the rom and tool from here- https://www.youtube.com/watch?v=mzN1q0h_YKM&ab_channel=Techjunkie

Hey,
I just uploaded BAD stuff from a BAD folder ...
preloader
ik
logo
secro
system
userdata
No life whatsoever. Tried as I realized after flash is done that I did a big fail to go into recovery (vol + & - & power) but nothing.
Even SPFlashtool is not seeing the phone nor adb.
Please help me unbricking this brand new phone.
/I wanted to make it full Hungarian language.../

I did the same. I tried to install another rom the tool and flash my phone died.
I did the firmware backup and now I am unable to restore the file Scatter.bin by Droid Tools.
I must have firmware.bat file but it was excluded.
someone could help me with this file. if there is a site to download and there is no way to reverse this? Please help me solve. Thank you

Do this
First Sorry for my Bad English
Try to do these steps:
Install all the drivers (including lephone and others)
Open Device Manager on Windows PC
Now plug in your SWITCHED OFF
And notice the hardaware changes
If you find a hardware named "MTK 675XXX Preloader" or something like that, then your mobile can be easily unbricked
if you notice a small triangle under it then the preloader drivers might not be installed
just click on it (be fast because it will only stay for a 10 seconds or less)
and click "Update Driver"
Now, Try to flash using SPF tools
If the above method dosent work then try to boot into bootloader. if not able, then YES, YOU HAVE HARD BRICKED YOUR PHONE

Look For Help My Bricked Mi5 Pro

Hai, view days ago i got bricked my phone, after i got replacement from distributor service center, this incident was started while my cell phone always hang randomly, then the bad things happened, my phone is no longer boot up, can't access twrp too,
I tried many trick to make my cell phone wake up but nothing happens,
I tried to flash with miflash (fastboot) with option clean all or clean and lock, it says error remote erase/write partition failed
I tried to flash with QFIL Download Qualcomm Flash Image Loader failed
Can't flash with command fastboot, all write failed
I tried with oem edl got error ACK Count don't match
I tried deep cable flash failed
I tried the last option with test point also failed
all also write/erase failed,
what i supposed to do to fix my phone

did you solve the problem? I guess i had the same...

Redmi Note 9 Bricked

I have a problem in my Redmi Note 9 phone suddenly my phone being bootloop and it doesnt have a fastboot,recovery and bootloader but my pc is detecting it every second. The problem is when flashing a rom im having a error because my phone is suddenly booting up. Im using a sp flash tool. And my screen is now dead but when i connect it to the pc it feels like it keep booting up and with that i cant flash anything. is there is a way to fix it. Also i try to give it to a specialist and its always say to buy a new circuit board because of the error in Emmc Storage cause when flashing it says insufficient storage.

Player_0821 said:
I have a problem in my Redmi Note 9 phone suddenly my phone being bootloop and it doesnt have a fastboot,recovery and bootloader but my pc is detecting it every second. The problem is when flashing a rom im having a error because my phone is suddenly booting up. Im using a sp flash tool. And my screen is now dead but when i connect it to the pc it feels like it keep booting up and with that i cant flash anything. is there is a way to fix it. Also i try to give it to a specialist and its always say to buy a new circuit board because of the error in Emmc Storage cause when flashing it says insufficient storage.
Click to expand...
Click to collapse
bro change the usb cable or port , or otherwise use a usb 2.0 extender , hope so it will solve your prob , cause the same prob happened with me in realme 2 pro,,
and there is no roms available for it till now .

If you can get it into a state where its not rebooting you should connect it to a linux machine. Run 'lsusb' in the terminal to see what it comes up with.

Player_0821 said:
I have a problem in my Redmi Note 9 phone suddenly my phone being bootloop and it doesnt have a fastboot,recovery and bootloader but my pc is detecting it every second. The problem is when flashing a rom im having a error because my phone is suddenly booting up. Im using a sp flash tool. And my screen is now dead but when i connect it to the pc it feels like it keep booting up and with that i cant flash anything. is there is a way to fix it. Also i try to give it to a specialist and its always say to buy a new circuit board because of the error in Emmc Storage cause when flashing it says insufficient storage.
Click to expand...
Click to collapse
Do you get a black screen, as in the screen been turned on but not displaying anything?

i too has the same problem i just bricked may redmi Note 9 MUIM 12.0.5.0 ,i was trying to root via procedures from
, only to end up up blank screen. When connect USB cable phone boots up the Android logo then goes straight to white fade screen and in this state usb connection disappears, My phone is boot unlocked and i have an active MI account ,i tried to flash the phone with both MI Flasher and SP Tool only ending up in errors,what do i need to do to revive the phone

(Deleted)

(Deleted)

Friends come on don't root on 12.05 or update to it .it's a vid from 12.02
Gruka factory reset or boot to mi assistant already tried that ?

TWRP bricks the redmi Note 9 at the Moment. There is one way to root it without TWRP. You need to Install magisk Manager with the official APK and Patch the boot Image from the official MIUI Rom.

EinTim23 said:
TWRP bricks the redmi Note 9 at the Moment. There is one way to root it without TWRP. You need to Install magisk Manager with the official APK and Patch the boot Image from the official MIUI Rom.
Click to expand...
Click to collapse
If you are using V12.0.5.0 or higher, TWRP will not work.
If you want to keep TWRP working on V12.0.5.0 or higher, you need to flash the stock rom lk partition using V12.0.4.0 (or lower). (It will works perfectly with lower lk partition version).
Here, are LK images for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221083/
If you want to disable TWRP, you need to flash stock rom recovery partition.
Here, are RECOVERY images for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209279/
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209295/
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209269/
Good luck
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/

Player_0821 said:
I have a problem in my Redmi Note 9 phone suddenly my phone being bootloop and it doesnt have a fastboot,recovery and bootloader but my pc is detecting it every second. The problem is when flashing a rom im having a error because my phone is suddenly booting up. Im using a sp flash tool. And my screen is now dead but when i connect it to the pc it feels like it keep booting up and with that i cant flash anything. is there is a way to fix it. Also i try to give it to a specialist and its always say to buy a new circuit board because of the error in Emmc Storage cause when flashing it says insufficient storage.
Click to expand...
Click to collapse
i have same problem did you fix your phone now?

gruka said:
i too has the same problem i just bricked may redmi Note 9 MUIM 12.0.5.0 ,i was trying to root via procedures from
, only to end up up blank screen. When connect USB cable phone boots up the Android logo then goes straight to white fade screen and in this state usb connection disappears, My phone is boot unlocked and i have an active MI account ,i tried to flash the phone with both MI Flasher and SP Tool only ending up in errors,what do i need to do to revive the phone
Click to expand...
Click to collapse
did you fix your phone now ?
i have the same problem

whaa01 said:
did you fix your phone now ?
i have the same problem
Click to expand...
Click to collapse
If you try to boot your device and it keeps in a black screen because outdated TWRP, please follow this guide: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/

Question Need Expert who can help in unbrick the realme x7 max. As hard bricking is getting common with new ROMs

Recently hard bricked my x7 max and while using MTK/SP tools gettings errors so need someone to help. I have seen so many people with same issues but no details troubleshooting guide here and also on YT.
Steps i took
Unlock bootloader(with stock rom and RUI4, Android 13, latest update)
Installed TWRP(found one twrp that actually worked but i was not able to backup the rom, showing errors while taking backup, error 255)
I thought i can revert on stock using SP tools so moved ahead
Once in TWRP, i installed Project elixir ROM and rebooted to bootloader, phone got dead.
I tried VCOM,linusb,SP flash tool and MTK Authbypass (brom waiting , maybe some issue in detect)
Today tried again(Somehow Brom was ok, but didnt get Authbypass message)
Tried multiple times but now it show error (image attached)
Need further assistance.
Didnt know how bad all these custom rom installing has become. In my days it was cool and fun without getting any errors( i was taking about 2015/2017....)

Kind of same thing happened to me 2 days ago. Trying to root the device and everything was fine until I restarted the phone. After that it just got hard bricked total black screen no realme logo, fastboot or recovery. Had to go into EDL mode and flash the offical rom. In my case there was no error in the mtk bypass tool and everything flashed without any errors. This time the phone booted normally and straight went to realme recovery mode and from there I just wiped the userdata and this time it got stuck in orange state(no realme animation logo). Although this time I could access the fastboot, so tried to install twrp but after flashing, nothing happened same stuck in orange state warning. After this again I tried to flash using mtk tool and after doing that everything remained same but I couldn't access fastboot anymore. The funny story is now I cannot even flash using mtk tool anymore. So, everything is ****ed, I don't think customer service can fix this, would be better to buy a new phone.
My experience with realme phone specially with mtk processor has been extremely bad , I faced errors after errors. Earlier I had redmi note 7 pro and it was excellent in terms of flashing roms and all. So many times I had bricked the device but could fix it no issues.
Anyway as I didn't faced this error I don't know how to fix this. I also used this exact same version also. Try using https://saransaro.com/SP_Flash_Tool_v6.2216_Win.zip . And see if this works.
Also, don't flash the scatter file of firmware after a.22 as it doesn't work for some reason . I used the a.22 one it worked fine.
Please let me know if you were able to fix it or not.

[CLOSED] Bricked [Error verifying vbmeta image: HASH_MISMATCH] (Brick between Soft and Hard)

Hello, As You Saw from the title, i need help for the SM-M315F (ZTO), as it was bricked.
How did i get here? Well, i thought of installing evolutionX unofficial custom ROM, alongside TWRP, and while following the tutorial i got from the TWRP, the download failed sucessfully (its funny, but its technically true from my standpoint, as it was marked as a sucess by odin, but it didnt open TWRP on my M31).
And then it got into a bootloop, which i got it resolved by making the tutorial again, and then it asked for vbmeta.
But when i saw that it was a tutorial for android 10 firmware, it was too late. my phone was bricked. Smart switch wouldnt fix it, my device manager would only detect the usb driver for the cable and the USB-C entry on the phone, and if i try to reboot, it would get me back to the download mode screen with a error:
Error verifying vbmeta image: HASH_MISMATCH (3)
you would may say: "oh, well, try at least getting back to original firmware". That maybe would work, but i dont have too much patience and sometimes the odin firmware install would stop randomly...
Any Help would be Grateful.
Cheers,
MGT1.

MGT1 said:
Hello, As You Saw from the title, i need help for the SM-M315F (ZTO), as it was bricked.
How did i get here? Well, i thought of installing evolutionX unofficial custom ROM, alongside TWRP, and while following the tutorial i got from the TWRP, the download failed sucessfully (its funny, but its technically true from my standpoint, as it was marked as a sucess by odin, but it didnt open TWRP on my M31).
And then it got into a bootloop, which i got it resolved by making the tutorial again, and then it asked for vbmeta.
But when i saw that it was a tutorial for android 10 firmware, it was too late. my phone was bricked. Smart switch wouldnt fix it, my device manager would only detect the usb driver for the cable and the USB-C entry on the phone, and if i try to reboot, it would get me back to the download mode screen with a error:
Error verifying vbmeta image: HASH_MISMATCH (3)
you would may say: "oh, well, try at least getting back to original firmware". That maybe would work, but i dont have too much patience and sometimes the odin firmware install would stop randomly...
Any Help would be Grateful.
Cheers,
MGT1.
Click to expand...
Click to collapse
Unless your device is completely dead and unresponsive, it isn't bricked.
I assume you unlocked the bootloader, yes?
What guide did you follow to flash the firmware?
Are you able to boot into recovery?
What happens when you try to put your device in download mode?

Closed at the OP's request.