I have a problem in my Redmi Note 9 phone suddenly my phone being bootloop and it doesnt have a fastboot,recovery and bootloader but my pc is detecting it every second. The problem is when flashing a rom im having a error because my phone is suddenly booting up. Im using a sp flash tool. And my screen is now dead but when i connect it to the pc it feels like it keep booting up and with that i cant flash anything. is there is a way to fix it. Also i try to give it to a specialist and its always say to buy a new circuit board because of the error in Emmc Storage cause when flashing it says insufficient storage.
Player_0821 said:
I have a problem in my Redmi Note 9 phone suddenly my phone being bootloop and it doesnt have a fastboot,recovery and bootloader but my pc is detecting it every second. The problem is when flashing a rom im having a error because my phone is suddenly booting up. Im using a sp flash tool. And my screen is now dead but when i connect it to the pc it feels like it keep booting up and with that i cant flash anything. is there is a way to fix it. Also i try to give it to a specialist and its always say to buy a new circuit board because of the error in Emmc Storage cause when flashing it says insufficient storage.
Click to expand...
Click to collapse
bro change the usb cable or port , or otherwise use a usb 2.0 extender , hope so it will solve your prob , cause the same prob happened with me in realme 2 pro,,
and there is no roms available for it till now .
If you can get it into a state where its not rebooting you should connect it to a linux machine. Run 'lsusb' in the terminal to see what it comes up with.
Player_0821 said:
I have a problem in my Redmi Note 9 phone suddenly my phone being bootloop and it doesnt have a fastboot,recovery and bootloader but my pc is detecting it every second. The problem is when flashing a rom im having a error because my phone is suddenly booting up. Im using a sp flash tool. And my screen is now dead but when i connect it to the pc it feels like it keep booting up and with that i cant flash anything. is there is a way to fix it. Also i try to give it to a specialist and its always say to buy a new circuit board because of the error in Emmc Storage cause when flashing it says insufficient storage.
Click to expand...
Click to collapse
Do you get a black screen, as in the screen been turned on but not displaying anything?
i too has the same problem i just bricked may redmi Note 9 MUIM 12.0.5.0 ,i was trying to root via procedures from
, only to end up up blank screen. When connect USB cable phone boots up the Android logo then goes straight to white fade screen and in this state usb connection disappears, My phone is boot unlocked and i have an active MI account ,i tried to flash the phone with both MI Flasher and SP Tool only ending up in errors,what do i need to do to revive the phone
(Deleted)
(Deleted)
Friends come on don't root on 12.05 or update to it .it's a vid from 12.02
Gruka factory reset or boot to mi assistant already tried that ?
TWRP bricks the redmi Note 9 at the Moment. There is one way to root it without TWRP. You need to Install magisk Manager with the official APK and Patch the boot Image from the official MIUI Rom.
EinTim23 said:
TWRP bricks the redmi Note 9 at the Moment. There is one way to root it without TWRP. You need to Install magisk Manager with the official APK and Patch the boot Image from the official MIUI Rom.
Click to expand...
Click to collapse
If you are using V12.0.5.0 or higher, TWRP will not work.
If you want to keep TWRP working on V12.0.5.0 or higher, you need to flash the stock rom lk partition using V12.0.4.0 (or lower). (It will works perfectly with lower lk partition version).
Here, are LK images for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221083/
If you want to disable TWRP, you need to flash stock rom recovery partition.
Here, are RECOVERY images for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209279/
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209295/
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209269/
Good luck
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
Player_0821 said:
I have a problem in my Redmi Note 9 phone suddenly my phone being bootloop and it doesnt have a fastboot,recovery and bootloader but my pc is detecting it every second. The problem is when flashing a rom im having a error because my phone is suddenly booting up. Im using a sp flash tool. And my screen is now dead but when i connect it to the pc it feels like it keep booting up and with that i cant flash anything. is there is a way to fix it. Also i try to give it to a specialist and its always say to buy a new circuit board because of the error in Emmc Storage cause when flashing it says insufficient storage.
Click to expand...
Click to collapse
i have same problem did you fix your phone now?
gruka said:
i too has the same problem i just bricked may redmi Note 9 MUIM 12.0.5.0 ,i was trying to root via procedures from
, only to end up up blank screen. When connect USB cable phone boots up the Android logo then goes straight to white fade screen and in this state usb connection disappears, My phone is boot unlocked and i have an active MI account ,i tried to flash the phone with both MI Flasher and SP Tool only ending up in errors,what do i need to do to revive the phone
Click to expand...
Click to collapse
did you fix your phone now ?
i have the same problem
whaa01 said:
did you fix your phone now ?
i have the same problem
Click to expand...
Click to collapse
If you try to boot your device and it keeps in a black screen because outdated TWRP, please follow this guide: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
Related
hi friends, i need so much your help!.
I have xaiomi mi5, the operating system of the cellphone has been updated, and then the device has entered the loop.
He can not get up at all.
I've tried to do so far:
FAST BOOT - but even the computer can not read the device despite all the permissions I have approved for the computer.
MIPCSUIT - does not work well because the computer does not recognize the device.
Your help must be smart and good people!
I am also stuck with the same problem.
At least I can get fastboot.
I think if you OK to loose data then just go to recovery mode with Volume up + power button pressed together. And wipe all. This may solve the problem. But I don't want to loose data I am skipping this option.
If any one knows other way to unbrick without full wipe then please let us know.
Thanks
have you unlocked bootloader?
you can try run by fastboot twrp recovery mode.
Code:
fastboot boot twrp.img
after few seconds phone boot to recovery, you can encrypt the phone and copy data.
twrp is here
My bootloader is locked I think.
I tried that command. Didn't boot to twrp.
Any other way.
Anyway Thanks for suggesting.
Are you on latest MIUI global stable? I think Xiaomi's guys ****ed it up this time around and got bootloop for everybody on latest update.
Take a read here and good luck: http://en.miui.com/thread-2776961-1-1.html
ok listen me... if you have got unlock permission and unlocked your phone or you have unlock code.. you must bind your acc with other xiaomi phone easly enter your acc and bind acc now go fastboot download mi flash unlocker install adb driver and unlock then you can flash stock rom i had that problem and i solved
Hello,
I had similar issue.
To be able to start phone/miui you should remove sim card,
in my case it was connected to connecting to cell network that caused reboot.
Than it will be possible to update phone using WiFi.
For me issue was solved with V9.5.2.0.NAAMIFA update.
BR Jarek.
jarek102 said:
Hello,
I had similar issue.
To be able to start phone/miui you should remove sim card,
in my case it was connected to connecting to cell network that caused reboot.
Than it will be possible to update phone using WiFi.
For me issue was solved with V9.5.2.0.NAAMIFA update.
BR Jarek.
Click to expand...
Click to collapse
Lifesaver here!
This worked perfectly for me! Go figure?
Cheers
You can try
I tried version gemini global images v10.2.2.0. OAAMIXM 2019115 GLOBAL but failed then tried v8.11.22.20181122.000 8.0 GLOBAL but failed then 2 month later i tried with good battery and good on off and main important is version GEMINI GLOBAL IMAGES 6.11.10 _20161110 and version GEMINI GLOBAL IMAGES V7.2.4.0.MAAMIDC 20160129. AND GUESS WHAT SUCCESS. NEVER TRY WITHOUT BATTERY AND WITHOUT EDL POINT. EDL POINT FOR UNLOCKING BOOTLOCK AND DOWNLOAD SOFTWARE FLASH FILES WITH GOOD INTERNET WITHOUT INTERUPPT SO FLASH SUCCESS. MY 2 MOTHERBOARD OF MI5 SAVED WITHOUT HARDWARE. HOW TO KNOW SOFTWARE OR HARDWARE....1ST CHECK CHARGING HAPPENING OR NOT IN SWITCH OFF AND CAN IT GO TO FASTBOOT MODE OR RECOVERY MODE. IF ALL THIS GOOD GO FOR FLASH IN SAME PROCESS. OTHERWISE HARDWARE AS STATED THAT RESISTOR ALSO PLAY A VITAL ROLE IN BOOTING OR STUCK AT MI LOGO. MOISTURE IN PHONE UNDER IC REQUIRE HEAT WITH PASTE AT HARDWARE LEVEL.
Yeah, I'm not feeling very smart right now.
Short story:
Accidentally wiped OS in TWRP, now only seem to have access to fastboot. Can I fix this? Flash another ROM? Anything? Bootloader is unlocked, can't seem to get into TWRP anymore. Power + Volume up only takes me to fastboot again.
Long story:
Magisk module caused a bootloop. Wanting to try and avoid a factory reset, I tried sideloading Magisk for TWRP which didn't work, ultimately gave up and wanted to perform a factory reset via TWRP, but I've been working late and ticked the wrong box without thinking. Bad idea, I know. Wiped system, yes.
Aside from feeling exceptionally stupid, can this situation be salvaged? The phone doesn't switch off, it just sits in fastboot. I have Minimal ADB and Fastboot on my PC. Any help will be greatly appreciated, really.
Just in case anyone else ends up with a similar problem, the resolution was fortunately rather straightforward - I needed to grab the Mi Flash tool (as it turns out, this version worked best), stock firmware for my version, go into fastboot (which was no issue as that was the only thing my phone would do) and then open the Mi Flash tool and flashing the firmware was pretty straightforward from there. I even managed to get a BSOD during the process, but it's not like it could get any worse, anyway. Rebooted, restarted the process and about 10-15 minutes later, my phone was happily booting again.
divided by zero said:
Just in case anyone else ends up with a similar problem, the resolution was fortunately rather straightforward - I needed to grab the Mi Flash tool (as it turns out, this version worked best), stock firmware for my version, go into fastboot (which was no issue as that was the only thing my phone would do) and then open the Mi Flash tool and flashing the firmware was pretty straightforward from there. I even managed to get a BSOD during the process, but it's not like it could get any worse, anyway. Rebooted, restarted the process and about 10-15 minutes later, my phone was happily booting again.
Click to expand...
Click to collapse
With Fastboot mode and Mi flash as fail safes , we can flash to our hears content with no worries !
Also a more automated tool is a custom mi flash tool by a developer called XiaimiToolV2 ,which has a dedicated mode for bricked phones or downloads the latest fastboot roms for you.
crs951 said:
With Fastboot mode and Mi flash as fail safes , we can flash to our hears content with no worries !
Also a more automated tool is a custom mi flash tool by a developer called XiaimiToolV2 ,which has a dedicated mode for bricked phones or downloads the latest fastboot roms for you.
Click to expand...
Click to collapse
I have similar problems , but my Mi9 is not recognized by PC and wont enter fastboot . Only sign of life is blinking white LED sometimes I connect it to charger,to PC or try to turn it on.
Can anyone suggest me what to do ?
mstaglicic said:
I have similar problems , but my Mi9 is not recognized by PC and wont enter fastboot . Only sign of life is blinking white LED sometimes I connect it to charger,to PC or try to turn it on.
Can anyone suggest me what to do ?
Click to expand...
Click to collapse
I had excaxtly that witha my mi5 , completely dead .
Leave it on the charger for a little bit,mine after an unsuccessful flash with mi flash (catastrophic error message) it turned back on.
IF not download XiaomiTool V2 and try the option for bricked phones.
I tried that yesterday but that option is still in development. Only the modifications one is supported currently. As for the issue mentioned, maybe it's really just a matter of charging the phone first. Can't hurt either way.
mstaglicic said:
I have similar problems , but my Mi9 is not recognized by PC and wont enter fastboot . Only sign of life is blinking white LED sometimes I connect it to charger,to PC or try to turn it on.
Can anyone suggest me what to do ?
Click to expand...
Click to collapse
Try to use the EDL mode
How to force it to EDL by key combination or maybe deep flash cable ?
My Mi account is authorized for EDL flash but I cant get Mi9 into EDL mode on my PC ( Windows10 )
No OS, but working TWRP
Hi,
I have a similar problem with my mi 9.
I followed a really bad description for the update xiaomi.eu from MIUI10 to MIUI11.
https://www.chinahandys.net/xiaomi-eu-rom-update/
It recomended to wipe alvik / Art Cache, Cache AND System :crying:
So I do not have no OS any more. However, TRWP is still working.
I have a Backup but it did not work :crying:
Is there a better option than the Mi Flash tool?
Please help me!
Since you already have TWRP, download the latest Xiaomi.eu custom ROM available for the Mi 9, which is 9.11.7 to your computer.
Also download the latest TWRP by Mauronofrio from XDA which is 3.3.1-42.
Then use adb to transfer both the ROM and TWRP to your Mi 9.
In TWRP, install TWRP first and manually reboot to twrp using the vol up + power button.
In TWRP, install the ROM, do a factory reset, then finally reboot.
Sent from my MI 9 (Cepheus) using Tapatalk
sangbuana said:
Since you already have TWRP, download the latest Xiaomi.eu custom ROM available for the Mi 9, which is 9.11.7 to your computer.
Also download the latest TWRP by Mauronofrio from XDA which is 3.3.1-42.
Then use adb to transfer both the ROM and TWRP to your Mi 9.
In TWRP, install TWRP first and manually reboot to twrp using the vol up + power button.
In TWRP, install the ROM, do a factory reset, then finally reboot.
Sent from my MI 9 (Cepheus) using Tapatalk
Click to expand...
Click to collapse
Thank you very much for your reply.
When I tried to make my TWRP backup work I had several problems.
First was "vendor read only". So I went in TWRP to "mount" and unticked the "mount vendor partition read-only" (sounds easy, took me some time to find out)
Then I was able to do the restore without error message. However just boot loop and only the possibility to access TWRP.
After some while I realized that this restored the wiped system partition.
So I flashed the aktual MIUI 11 9.11.7 again and rebooted.
And it worked perfectly! :victory:
I did no Factory reset all the time, it seems that everything is perfect!
No lags, no problems with the camera, no issues with auto rotation.
Tom
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?
A couple days ago my Redmi Note 9 (merlin) 4/128 GB NFC automically installed the Update from V12.0.3.0.QJOEUXM to V12.0.4.0.QJOEUXM over night. I had rooted and installed a TWRP on it. As I had noticed that it was not rooted anymore I tried to reflash the TWRP over Fastboot because it was overwritten by MIUI. When I tried to boot the twrp.img the phone did so and the screen was on but black. After 4 or 5 tries it hanged up in a bootloop and I cannot access Fastboot Mode or something else anylonger.
Is there something left I can try?
Already tried power and minus option.when you connect to a desktop what does it say ?
Dokrak99 said:
Already tried power and minus option.when you connect to a desktop what does it say ?
Click to expand...
Click to collapse
It goes on and Windows makes the sound for a new device connected, and then it goes off again, and Windows makes the sound for disconnecting a device. This repeats for around 4 or 5 minutes then it goes finally off.
That's bad.
Hold the power +/- longer then 15 seconds try both.
Second
Charge for about 10 minutes and try the same again.
Last drain it when down keep pushing the power button to flat it.hook it up on desktop and install miflashtools.or try power +/- again
Dokrak99 said:
Hold the power +/- longer then 15 seconds try both.
Click to expand...
Click to collapse
Same as:
LordRedstone05 said:
It goes on and Windows makes the sound for a new device connected, and then it goes off again, and Windows makes the sound for disconnecting a device. This repeats for around 4 or 5 minutes then it goes finally off.
Click to expand...
Click to collapse
Dokrak99 said:
Charge for about 10 minutes and try the same again.
Click to expand...
Click to collapse
When I try to charge it it goes in the bootloop again until I disconnect it and the battery runs out.
Dokrak99 said:
Last drain it when down keep pushing the power button to flat it.
Click to expand...
Click to collapse
It goes on, shows this battery icon, that it's empty and goes off. This repeats until I release the button.
Dokrak99 said:
hook it up on desktop and install miflashtools.or try power +/- again
Click to expand...
Click to collapse
The miflashtool does nothing when I click on Flash with the images and scripts loaded. Power +/- does the same as before.
Sorry I thought flash tools had a option in top for selecting boot options.There is a mi tool around where can select the boot options.i need to search on my desktop what it was.we need to trigger it in fastboot/recovery mode some how.most likely it was xiaomi tools V2 but I really need to check it.tools V2 got a bricked option do.but since it restarts everytime it's pretty long shot
Dokrak99 said:
Sorry I thought flash tools had a option in top for selecting boot options.There is a mi tool around where can select the boot options.i need to search on my desktop what it was.we need to trigger it in fastboot/recovery mode some how.most likely it was xiaomi tools V2 but I really need to check it.tools V2 got a bricked option do.but since it restarts everytime it's pretty long shot
Click to expand...
Click to collapse
Thanks in advance
What should I do in this tool? The tool doesn't recognize my phone. It brings nothing since I cannot access Fastboot.
Well basically there is only one real option left . contact mi service center because mi don't support or they closed there download,edl support on there phones to prevent rom swapping .there is a edl cable with mtk support around but that's a long shot.because I never had a messed up phone like this.at least not one with mtk.without recognise you're desktop I don't see a fix in this to get in fastboot or flash it.
Download platform tools drop it on c:/ so c:/platform tools .install abd drivers package if you didn't have it.go in platform tools the top line and tick Cmd hit enter.try command : fastboot devices .try a few times if a number pops up you can try .fastboot reboot fastboot
LordRedstone05 said:
A couple days ago my Redmi Note 9 (merlin) 4/128 GB NFC automically installed the Update from V12.0.3.0.QJOEUXM to V12.0.4.0.QJOEUXM over night. I had rooted and installed a TWRP on it. As I had noticed that it was not rooted anymore I tried to reflash the TWRP over Fastboot because it was overwritten by MIUI. When I tried to boot the twrp.img the phone did so and the screen was on but black. After 4 or 5 tries it hanged up in a bootloop and I cannot access Fastboot Mode or something else anylonger.
Is there something left I can try?
Click to expand...
Click to collapse
TWRP bricked my redmi Note 9 too, but i had ADB Connection in the black Screen so i rebooted to Fastboot over ADB and reflashed the Stock rom
LordRedstone05 said:
A couple days ago my Redmi Note 9 (merlin) 4/128 GB NFC automically installed the Update from V12.0.3.0.QJOEUXM to V12.0.4.0.QJOEUXM over night. I had rooted and installed a TWRP on it. As I had noticed that it was not rooted anymore I tried to reflash the TWRP over Fastboot because it was overwritten by MIUI. When I tried to boot the twrp.img the phone did so and the screen was on but black. After 4 or 5 tries it hanged up in a bootloop and I cannot access Fastboot Mode or something else anylonger.
Is there something left I can try?
Click to expand...
Click to collapse
Did you find solution on this? Please answer bro i need your help
Jayson Galang said:
Did you find solution on this? Please answer bro i need your help
Click to expand...
Click to collapse
Unfortunately i haven't found a solution. I had to send it to a service center 2 Days ago. Sorry, that i couldn't help.
the right driver is mtk this is not adb nothing happens the this you could fixs is
go to the nearest techniciann beacause they need special tools to fix properly
Is your phone still bricked, If yes, I can provide link for the factory firmware recently released for Merlin, You could give flashing that in SP Flash a try, does not need auth account.
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
Good luck
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
Communos said:
Is your phone still bricked, If yes, I can provide link for the factory firmware recently leaked for Merlin, You could give flashing that in SP Flash a try, does not need auth account.
Click to expand...
Click to collapse
yow is that legit? Had my redmi note 9 bricked for a week now.
CruisaderX said:
yow is that legit? Had my redmi note 9 bricked for a week now.
Click to expand...
Click to collapse
If you got bootloop after flashed magisk, you need to flash stock rom boot.img.
If you got bootloop after flashed TWRP, you need to flash stock rom recovery.img.
If you got bootloop (or black screen) after flashed misc partition, you need to erase misc partition.
If it keeps restarting, you've made any wrong modification. You need to follow your steps back and try to unmake your modification.
If you can't enter in fastboot mode or recovery mode, you need to flash stock rom using sp flash tool.
If you are using V12.0.4.0 or lower, you can flash without EDL and authentication.
If you are using V12.0.5.0 or higher, you need EDL and authentication for flashing.
If you are using V12.0.5.0 or higher, TWRP will not work.
If you want to use sp flash tool, you need to flash the stock rom preloader using V12.0.4.0 (or lower). (It will works perfectly with lower preloader binary version).
With an older preloader version, your phone will can receive DA files and accept flashing with NO auth.
Everything you need to do is plug your phone in usb (without press any key, if you press any key it will enter in EDL mode and requests authenticaion).
Here, are PRELOADER binaries for flashing: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221081/
Here, are DA files for flashing using flash tool: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209767/
Here, you can find boot images for original stock and magisk patched: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If you want to keep TWRP working on V12.0.5.0 or higher, you need to flash the stock rom lk partition using V12.0.4.0 (or lower). (It will works perfectly with lower lk partition version).
Here, are LK images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218925/
If you want to disable TWRP, you need to flash stock rom recovery partition.
Here, are RECOVERY images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
Good luck
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
VD171 said:
If you got bootloop after flashed magisk, you need to flash stock rom boot.img.
If you got bootloop after flashed TWRP, you need to flash stock rom recovery.img.
If you got bootloop (or black screen) after flashed misc partition, you need to erase misc partition.
If you are using V12.0.5.0 or higher, TWRP will not work.
Here, you can find boot images for original stock and magisk patched: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If you want to keep TWRP working on V12.0.5.0 or higher, you need to flash the stock rom lk partition using V12.0.4.0 (or lower). (It will works perfectly with lower lk partition version).
Here, are LK images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218925/
If you want to disable TWRP, you need to flash stock rom recovery partition.
Here, are RECOVERY images for flashing: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204671/
If your device keep booting in recovery (or blackscreen), you need to erase misc partition.
Here, is the guide for erasing MISC partition: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209299/
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
Good luck
[/QUOTE
Click to expand...
Click to collapse
I tried actually before after failed attempt of flashing twrp. First, I got my redmi note 9 bricked after following one of the guides posted here (rooting), I will call this state 1 brick. In state 1 brick you can still access fastboot mode normally. Then i tried to flash twrp hoping to just flash a rom to fix it leading to state 2 brick. In state 2 brick, it seems like it is stucked on recovery (btw the recovery is only displaying black screen) and is classifying fastboot as the bootloader, meaning you can boot into fastboot using adb command reboot bootloader. Then I followed one of the guides here again and then it managed to lead my device to state 3 brick. In state 3 brick it continuously boot looping only displaying the boot image for a second then repeat. Normally it can be fixed by flashing a stock rom using sp flash tool but not with xiaomi devices. Now I am stucked with a hard bricked note 9 with no way of fixing.
CruisaderX said:
i tried before actually after failed attempt of flashing twrp. First, I got my redmi note 9 bricked after following one of the guides posted here (rooting, I will call this state 1 brick. In state 1 brick you can still access fastboot mode. Then i tried to flash twrp hoping to just flash a rom leading to state 2 brick. In state 2 brick, it seems like it is stucked on recovery (btw the recovery is only displaying black screen) and is classifying fastboot as the bootloader, meaning you can boot into fastboot using adb command reboot boot loader. Then I followed one of the guides here again and then it managed to lead my device to state 3 brick. In state 3 brick it continuously boot looping only displaying the boot image for a second then repeat. Normally it can be fixed by flashing a stock rom using sp flash tool but not with xiaomi device. Now I am stucked with a hard bricked note 9 with no way of fixing.
Click to expand...
Click to collapse
You need to read every line and every word careful and follow only specific guide for your specific problem.
If you try to do anything you see, obviously you will cause more damages to your device.
Please, read my post again: https://forum.xda-developers.com/t/redmi-note-9-merlin-4-128-nfc-hard-brick.4201717/post-84379823
If you can't enter in fastboot mode or recovery mode, you need to flash stock rom using sp flash tool.
If you are using V12.0.4.0 or lower, you can flash without EDL and authentication.
If you are using V12.0.5.0 or higher, you need EDL and authentication for flashing.
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
Good afternoon,
I had bricked this Redmi Note 9 and it was stuck on bootloop, I tried to sort this a while ago and gave up.
After looking through the forum i followed instructions how to place a new ROM onto the device, Once i was doing this someone unplugged my phone and now it is stuck on dm-verity corruption.
The Fastboot does no longer show the bunny it only states FastBoot.
I need major help on this urgently can anyone advise
Try this:
[VBMETA][IMG][PATCHED] VBMETA Image Partition: Disabled verity & Disabled verification for MERLIN (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
PATCHED VBMETA.IMG for MERLIN by VD171 For what do I need it ? If you try to flash any custom partition, your device can bricks or gets in bootloop. This patch with disabled verity and disabled verification avoid it and need to be flashed once...
forum.xda-developers.com
I have looked at your information but this does not help me.
It seems that whilst it was trying to flash it was unplugged which has switched the USB Debugging off, Therefore i cannot get into the phone via USB
Unless someone can advise otherwise i believe this phone is now finished and will never work again.
Gutted!
BigR1992 said:
I have looked at your information but this does not help me.
It seems that whilst it was trying to flash it was unplugged which has switched the USB Debugging off, Therefore i cannot get into the phone via USB
Unless someone can advise otherwise i believe this phone is now finished and will never work again.
Gutted!
Click to expand...
Click to collapse
No one device is "finished" while their parts are working fine.
Damage due to misuse are totally reversible.
What would you suggest then?
Just flash any stock miui rom.
I managed to get past the corruption.
However i am now met with two bootloops, Followed by safemode and then the error NV DATA CORRUPTED
Just format/erase nvdata.
How do you do that?
BigR1992 said:
Good afternoon,
I had bricked this Redmi Note 9 and it was stuck on bootloop, I tried to sort this a while ago and gave up.
After looking through the forum i followed instructions how to place a new ROM onto the device, Once i was doing this someone unplugged my phone and now it is stuck on dm-verity corruption.
The Fastboot does no longer show the bunny it only states FastBoot.
I need major help on this urgently can anyone advise
Click to expand...
Click to collapse
I had the same issue. This video is what fixed my phone from hard bricked. Don't forget that volume up + volume down must be pressed together, and it must be plugged in whilst pressing the buttons. It's also used to detect the driver. You have to be quick when you see MediaTek. Follow the instructions and you'll see. Python must be installed from the Microsoft Store as the version provided is outdated. Good luck bro. Sorry you had to wait months for someone to experience the same problem. I'm fighting with dmverity right now. lol.