Good night guys, first of all I'm sorry if the text is confusing, English is not my strong point, i'm Brazilian.
I had the cyanogenmod in my phone(Moto g thea 1078) and as it was giving so many problems I decided to change the rom to the crDroid, but by a huge oversight of my part when I wipe I marked all the options, now I am not able to install any rom, not even the stock rom, some I can install by twrp without any error (crDroid, Viper), but when I try restart the system after installing twrp says that I am without any rom's installed, and if I ignore and restart anyway my cell phone is eternally on the logo screen, there is only one rom that I was able to install and start the phone, the 1068 rom stock, but chips and wifi doesn't work, when I'm going to install a 1078 stock of error in primary_gpt, in boot and the sparsechunks
"version downgraded for primary_gpt
version downgraded for boot
e img is too big for the sparsechunk"
does anyone have any ideas to help me?
Copy a proper ROM for Thea and Gapps on a micro SD card using a computer or a friend's phone, then place the SD card on your phone and install it through TWRP.
Of course you needed to wipe everything - you always need to delete everything before flashing new ROM, just NOT the external storage, because that's where your installation package is. Try any of the following (some of them don't have SuperSU included, so you will have to flash it separately):
- Viper or
- [proper] crDroid or
- DarkNess reDefined or
- Paranoid Android etc.
Don't forget about the Gapps package and SuperSu (the zip file).
Good luck.
i'v tried this once, doesn't work, but now i can't even install twrp or similar recoverys, always gives an erro "mismatched partition size (recovery)", i google it and people says that this error is normal, the twrp should start even with this errro, but when i start the recovery i got 'boot up failed' or starts the original recovery
luizwalber said:
i'v tried this once, doesn't work, but now i can't even install twrp or similar recoverys, always gives an erro "mismatched partition size (recovery)", i google it and people says that this error is normal, the twrp should start even with this errro, but when i start the recovery i got 'boot up failed' or starts the original recovery
Click to expand...
Click to collapse
Your phone is crippled for life, you installed a firmware for the wrong device. Go install a Titan ROM and TWRP, there is nothing to do. Your phone is an XT1068 now. You lost your LTE ability forever.
https://dl.twrp.me/titan/
Related
I'm what you'd call a super noob at this stuff and I've got my poor little SP in a crazy bootloop... I've tried LITERALLY EVERYTHING the internet has told me to try; wiping every cache out there, flashing custom roms, stock roms, you name it. It began when I just got CWM (don't ask me why it happened then, I have no clue why) and this is even BEFORE I put a ROM on! (I was all ready to put a ROM after getting CWM but bootloop happened).
Note: I have CWM recovery, I think I have lost my stock recovery, if I try some ROMS (ex. CM 12) they give me this error 7, once I found certain ROMS (PACMAN ROM, unofficial stock ROM) that would flash and install, they did but still left me with a bootloop, I have tried wiping so many caches it's not even funny, I've tried flashing the original firmware, nothing works... so I'm here for help.
I have looked at every google link and every method possible in trying to fix this thing! I really can't afford a new phone and I just love this one too much... please help!
farahtasnim said:
I'm what you'd call a super noob at this stuff and I've got my poor little SP in a crazy bootloop... I've tried LITERALLY EVERYTHING the internet has told me to try; wiping every cache out there, flashing custom roms, stock roms, you name it. It began when I just got CWM (don't ask me why it happened then, I have no clue why) and this is even BEFORE I put a ROM on! (I was all ready to put a ROM after getting CWM but bootloop happened).
Note: I have CWM recovery, I think I have lost my stock recovery, if I try some ROMS (ex. CM 12) they give me this error 7, once I found certain ROMS (PACMAN ROM, unofficial stock ROM) that would flash and install, they did but still left me with a bootloop, I have tried wiping so many caches it's not even funny, I've tried flashing the original firmware, nothing works... so I'm here for help.
I have looked at every google link and every method possible in trying to fix this thing! I really can't afford a new phone and I just love this one too much... please help!
Click to expand...
Click to collapse
please state your current bootloader status. Is it unlocked or still locked?
TechnoSparks said:
please state your current bootloader status. Is it unlocked or still locked?
Click to expand...
Click to collapse
I have unlocked my bootloader. Thank you for replying!
farahtasnim said:
I have unlocked my bootloader. Thank you for replying!
Click to expand...
Click to collapse
Splendid! Knowing that your BL state is unlocked, this will make the whole process A LOT easier!
http://forum.xda-developers.com/xperia-sp/development/ubl-twrp-f2fs-support-xperia-sp-huashan-t3150230
Please go to the above link to get TWRP. Also, please keep in mind that TWRP is now the only still supported recovery around. CWM and PhilZ are both really outdated and no longer maintained due to the introduction of Cyanogen Recovery which is very minimal in features.
Once you get yourself the download, extract the files from the zip and get the twrp.img file. We will need this to flash into the boot partition of Xperia SP, granting you a direct boot into recovery once it is flashed. Please then copy the original zip to your sd card, as we will be flashing the original zip via TWRP later to give you access to TWRP in the future.
Using your preferred tool, flash the twrp.img file into the boot partition.
Connect your Xperia SP via fastboot. Make sure SP is shut down, hold volume up key and connect the SP with your computer.
If you're using a fastboot tool via command prompt, the command would be
fastboot flash boot twrp.img
If you're using flashtool, hit the lightning icon in the toolbar, select fastboot mode. Then select "Select kernel to flash". Make sure the file type is "img" else you won't able to find your TWRP img file. Navigate to mentioned img file and select it.
Afterwards, when flashing complete, you may insert sdcard and start the device. It will boot directly into TWRP as we flashed a recovery to the boot partition.
Clean wipe data, cache, dalvik cache, system. You may leave internal storage.
Flash the ROM zip you acquired (make sure file integrity is checked beforehand!) then the TWRP zip earlier. Flashing the TWRP zip grants you a persisting recovery, as explained in the linked thread.
You may now reboot and enjoy
Hi. I had miui7 running on my Mi3 and I wanted to run cm13. I used cm12 before but went back to stock miui7.
But I needed to update baseband to update to cm13 so i used the cm13update.zip from jrizzoli.github.io/dotfiles/ and it had TWRP (modified maybe?) as the recovery and I easily installed CM13 after that. Later I updated via OTA several times and it went fine until the last time when it would not boot anymore and would stay stuck in bootloop or if i went to recovery, it would start installing the last cm13 update and then end with error 7 and would give system partition has unexpected contents error.
I tried to do EVERYTHING I could to make the phone show ANYTHING other than the cm13 updating in recovery screen or the ANNOYING cm13 logo. NOTHING worked.
I tried using miflash to flash old kitkat 4.3 rom, 4.4 rom (would give partition error but i replaced the flash_all.bat from a tutorial to bypass the partition erro) and the latest 6.0 chinese developer rom and it would finish successfully within under 100 seconds and would either go back to the cm13 bootloop or go to recovery and update cm13.
I tried QPST and emmc download with 4.4 rom and it would end with no error and go right back to bootlogo. tried flashing that rom with miflash and it would end within 80 seconds and go back to boot logo.
I tried QFIL with the latest miui8 chinese dev one with firehose and it would fail when it would go near userdata. dont remember the exact error but it was something like cannot divide by zero.
The ONLY time i could flash a different recovery is when i would use the same cm13update.zip and replace the recovery.img with another img such as cwm or mi stock recovery. when i used cwm, it would also try to install cm13 and fail as well.
I tried taking the battery off and shorting the two points which made it easier to get into EDL mode to try to use QPST with no luck.
among so many tries I booted to cm13 a few times. never could it go to homescreen though. once it would not go past the password lockscreen even if i put in the proper password and another time it would but ALL the apps would crash and i would not be able to even swipe the home screens.
sometimes when i tried flashing the cwm ota roms that was in the phone previously or the latest cm14 with otg usb, i would get
INSTALL ZIP SUCCESSFUL on top of twrp but the whole screen would fill up with red writing which said
Error opening : 'data/data/cyanogenmod.platform' (no such file or directory)
and the same thing about every app that was there on the phone.
i do not care about my files theyre all backed up. I just want to use the phone again. Any help is appreciated. thanks.
bump
Hello there, I can make and upload twrp backup of miui v8 dev version. Have you tried to restore a backup?
You'll have to make new partition for this backup ( there are so many threads like "extend partition mi3" or smth like that)
http://en.miui.com/thread-99430-1-1.html
Tried the ones from this thread?
http://forum.xda-developers.com/xia...instruction-to-restore-mi4-mi3-t3279927/page5
this is what i've done.
lenovo k3 note with twrp 2.8.7.2_K3_CUOCO92 and rom K3_LOLLIPOP_5.0_ROW_v1.12
i wanted to install one of the latest nougat rom. so i downloaded a twrp 3.1.1.1 made for the k3 note. i flashed the image from my old twrp and replaced choosing the RECOVERY partition.
Flashed ok, i tested a rom, AospExtended-v4.4-aio_otfp-20170708-1051- i flashed it and it worked.
OK BUT.............. i did not wipe the data partition because i received AN ERROR. the new nougat rom was ok but it was a superdirty flash with all the old apps that were crashing. what to do?
i enter into twrp, i REMEMBER that i had the data partition ENCRYPTED so i format it and after doing this i was able to do every wipe i want, included data.
OH PERFECT...... THIS IS WHAT I THOUGHT. i made a full wipe of the rom wiping 4 thinkg : data , internal storage, cache and dalvik cache.
reboot and BOOM. black screen. i press 3 or times the power button and the creen goes on... i am into twrp. from this moment i never returned to see my SYSTEM!
i tested other roms, same problem. i thought it was a twrp problem.... so i installed from the twrp an IMAGE of other twrp... i tested 2 or 3 other twrps specific for my phone k3 note.
I HAD LITTLE BENEFITS with another one.... just because when i press to reboot into system... the phone reboots into twrp AND I CAN SEE IT because the screen is ON, whilst with the "latest" twrp i found...... despites the flashing procedure was ALL CORRECT without errors, at the reboot i always entered into twrp...... BUT INTO A BLACK SCREEN MODE, like if the screen was on...touch enabled, but OFF backligt, and the only way to revive it it is to press power 2 or 3 times, to see the home of the twrp.
i've also found that on MOUNT.......... i always see SYSTEM unflagged, ok i flag it, reboot into system, actually reboot into twrp and system is UNflagged, i try the same thing ALSO flagging READ ONLY...... , idem reboot, twrp.
SEEMS THAT i cannot boot to system anymore. but..... if the twrp was fault, why for the first time let me flash the phone? i really entered into the nougat rom! i found all my old apps and files, but of course it was a DIRTY FLASH, i just wanted to make some wipes.....re flashi the rom.... but oddly i missed the possibility to return anymore to the system.
what could i do at the moment?
how to flash a original image? how to see if this recovery is ok? i donkt 'know where to find my answers......
ah last thing, while into the recovery i was always able to transfer files from pc to phone, but from minutes i am NO MORE ABLE to see the internal memory of the phone.
my computer does not see anything!!! so i am fukked i think....... i did not make anything different.
i only made a lot of wipes... a lot of flashing a lot of testin into recovery. i was able to see it from my pc and put new files through pc. now NO.
solved. i flashed with flash tools an old original firmware android 5.0, then i flased latest twrp with flashtool.... and then flashed the zip of a custom rom.
BL
if u have backup then restore ur stock version or reeboot??
So I tried reinstalling LOS, but I got an error: failed to update system image. So I wiped EVERYTHING. the internal storage, data, cache, everything. Then I reinstalled it. Same error but it said success. So I tried rebooting to the system, NOPE, straight to TWRP. Now I was scared. Why is this happening?? So I tried reinstalling twrp, changing the rom, but nothing fixed it. Now, nothing will boot other than TWRP. I try the bootloader, straight to twrp. I try system, straight to twrp. I try fastboot, straight to twrp. Please help, I need to keep my snapchat streaks alive :crying::crying:
I would try to install lg stock rom and then root, unlock bootloader, twrp and finally lineageos.
I'm having a similar nightmare. I have a D415 running running LineageOS 14.1. I downloaded the February 24th update and clicked on it. That booted me into TWRP. I wasn't sure what to do next, so I tried to reboot into the system but it send me straight back to TWRP. Then I booted into recovery, I think, and figured out how to install the update. However, I still couldn't boot the system. Then, I tried to restore the system . Everything seemed to go fine, but TWRP just looped me back to TWRP.
Just to be clear, is the correct method of booting to the system to select "reboot", then "system"? Is there any other method?
On the main screen, there's a selection called "Mount". If I click on it, I see "Select Partitions to Mount" . The top selection, "System", is unticked. I tried ticking it and rebooting, but was still returned to TWRP.
I was in the same boat....
Hey everyone, I'm hoping this works for you like it did for me. I'm a avid fan of the Linage OS and TWRP-- I donate to them like they're a charity! Lol....
Any who, I constantly check weekly for my "nightly" fix; however dread the update due to the TWRP loop. So, I decided to download the update via my phone browser to the SD card, and update manually.
What do you know, no TWRP loop! I use to have to go thru a 4 line script I found online to boot up to the system. So basically, go to recovery and install the update manually. Don't let the updater do it for you. If you are using Linage SU and Xposed, remember to reinstall.
---------- Post added at 03:12 AM ---------- Previous post was at 02:58 AM ----------
I found the script on Reddit under Linage OS: "How to fix TWRP boot loop after OTA. The article says it's only for MAKO devices; however, due desperation I tried it and it worked.
Use the l90 repartion tool
If u have a custom recovery use LG optimus l90 Reparation tool . Pick the stock option. It'll reboot then start again to finish. When it's done you'll be in clockwork recovery. Don't worry if u had twrp. Mount system then flash a cm based rom plus apps. See if it works.
I got distracted by life, but this weekend I put in some hours working on the phone again. The phone is stuck in TWRP 3.1.1-0. After endless misery, it seems it had a corrupted SD card. I've got a new 32gb SDHC in FAT32. I put lineage-14.1-20181007-nightly-w7-signed.zip on the card and put the card in the phone. Then I browsed to "install" and selected "sdcard (29648mb)". However, the zip file doesn't appear. There's just a folder that says "(Up A Level)". If I click that, there's a ton of empty folders.
How come the zip file doesn't appear? How can I install Lineage?
Here's more stuff I've tried:
installed Java (necessary for ADB, I think) for Windows 7
Installed universal ADB drivers
Plugged in phone
Followed instructions on https://www.xda-developers.com/install-adb-windows-macos-linux/ "Microsoft Windows ADB Setup”
Opened ADB, typed "ADB Devices"
My phone not detected.
Windows sees it as "target_device=w7"
Tried installing LG drivers. No love.
I'm a long time user of custom roms. I've bricked and subsequently rescued more android phones than I can remember and I always managed to get myself out of trouble before. But, I've been away from them for a while and I never had a phone with this dual slot setup before, and I'm stumped with this one
Before I start with the real issue, can I ask what the purpose of two slots is? Is it for dual booting, or something to do with the dual sims??
So, I'm on Lineageos. When I first flashed it I used the lineageos recovery. Now I would like TWRP permanently installed but can't get it to stick.
I've flashed the rom, and TWRP, so many times now. It's been a mess. My rom is working so no panic but if I go into recovery I'm back on the lineageos recovery and the text is too tiny to read (it wasn't like that when I used it before - the text was big).
Anyway, about half an hour ago I flashed the TWRP image in fastboot mode.
Then started twrp and copied the twrp zip over to the phone.
Then I flashed the zip and it flashed to both slots.
Then I couldn't get into my rom. It seemed to overwrite the boot.
So then I reflashed lineage and my rom is back and working fine, but I have the lineageos recovery again.
I thought that with TWRP in both slots, and me then flashing the rom, that the rom would only use one slot and TWRP would remain in the other and would be accessed when I boot to recovery.
Another thing. In fastboot mode (or the bootloader I should say) I have a black screen. The only feedback I get is from the terminal window on my linux computer. I can't see **** on the phone.
buachaille said:
I'm a long time user of custom roms. I've bricked and subsequently rescued more android phones than I can remember and I always managed to get myself out of trouble before. But, I've been away from them for a while and I never had a phone with this dual slot setup before, and I'm stumped with this one
Before I start with the real issue, can I ask what the purpose of two slots is? Is it for dual booting, or something to do with the dual sims??
So, I'm on Lineageos. When I first flashed it I used the lineageos recovery. Now I would like TWRP permanently installed but can't get it to stick.
I've flashed the rom, and TWRP, so many times now. It's been a mess. My rom is working so no panic but if I go into recovery I'm back on the lineageos recovery and the text is too tiny to read (it wasn't like that when I used it before - the text was big).
Anyway, about half an hour ago I flashed the TWRP image in fastboot mode.
Then started twrp and copied the twrp zip over to the phone.
Then I flashed the zip and it flashed to both slots.
Then I couldn't get into my rom. It seemed to overwrite the boot.
So then I reflashed lineage and my rom is back and working fine, but I have the lineageos recovery again.
I thought that with TWRP in both slots, and me then flashing the rom, that the rom would only use one slot and TWRP would remain in the other and would be accessed when I boot to recovery.
Another thing. In fastboot mode (or the bootloader I should say) I have a black screen. The only feedback I get is from the terminal window on my linux computer. I can't see **** on the phone.
Click to expand...
Click to collapse
1. Don't use lineage official because many users have had different problems. Use the unofficial one from the Telegram chat
2. The reason for the two slots is for updating your stock ROM without any risk of bricking
*When you get a stock update the system flashes it to the dormant slot ..if it bricks it boots back to active slot ...if it boots fine you switch slots and your dormant becomes your active .So you have a duplicate of all partitions but only one data partition ..so regardless of which slot you're using your data is there ..(+ and importantly doesn't get wiped ) so the concept is/was that you can flash stuff without bricking nor losing any data
3.The concept is simple : *usually because not always* your recovery flashes a rom or update to the slot you are not using ... But be careful .. ANYTHING ELSE like magisk or gapps or whatever gets flashed to the active slot ..so after flashing your ROM you need to change to the other slot in recovery then continue flashing gapps and magisk there ...so
SLOT A - flash ROM zip to B
*Reboot to slot B RECOVERY
SLOT B - flash gapps & magisk
___BOOT TO NEW ROM
*YOU ARE NOW USING SLOT B
#your old rom is still sleeping in slot A
In emergency you could go back there
4. Recovery ...this and other A/B devices and even other devices dont have a recovery partition ..so the recovery is inside the boot partition or recovery_ramdisk partition...which yes gets overwritten when flashing a new ROM or kernel etc
_the solution is easy_
Flash recovery back in recovery after flashing a custom ROM
*Some have twrp included and it gets flashed automatically
5. The not booting with recovery must have something to do with either bugs in the rom you are using or an old or bugged recovery or encryption/secure boot data problem ...either way you need to try different roms and recoveries and kernels - magisk combos
#see 7 # maybe you can't boot cos ARB 4 needs custom kernel on pie roms to boot
6. The black screen in fastboot is not a good sign ...sounds like your device got converted from Android 1 to MIUI and it triggered ARB 4
fastboot getvar anti
7. YOU CAN READ UP ON THAT ..all this info is available for our device in this forum and this is very lazy of you and I shouldn't be spoon feeding you .
***You can always sideload or backup sideways
fastboot boot recovery.img
*Go to advanced tab activate adb sideload
adb sideload "filename"
*File must be in adb folder
KevMetal said:
1. Don't use lineage official because many users have had different problems. Use the unofficial one from the Telegram chat
2. The reason for the two slots is for updating your stock ROM without any risk of bricking
*When you get a stock update the system flashes it to the dormant slot ..if it bricks it boots back to active slot ...if it boots fine you switch slots and your dormant becomes your active .So you have a duplicate of all partitions but only one data partition ..so regardless of which slot you're using your data is there ..(+ and importantly doesn't get wiped ) so the concept is/was that you can flash stuff without bricking nor losing any data
3.The concept is simple : *usually because not always* your recovery flashes a rom or update to the slot you are not using ... But be careful .. ANYTHING ELSE like magisk or gapps or whatever gets flashed to the active slot ..so after flashing your ROM you need to change to the other slot in recovery then continue flashing gapps and magisk there ...so
SLOT A - flash ROM zip to B
*Reboot to slot B RECOVERY
SLOT B - flash gapps & magisk
___BOOT TO NEW ROM
*YOU ARE NOW USING SLOT B
#your old rom is still sleeping in slot A
In emergency you could go back there
4. Recovery ...this and other A/B devices and even other devices dont have a recovery partition ..so the recovery is inside the boot partition or recovery_ramdisk partition...which yes gets overwritten when flashing a new ROM or kernel etc
_the solution is easy_
Flash recovery back in recovery after flashing a custom ROM
*Some have twrp included and it gets flashed automatically
5. The not booting with recovery must have something to do with either bugs in the rom you are using or an old or bugged recovery or encryption/secure boot data problem ...either way you need to try different roms and recoveries and kernels - magisk combos
#see 7 # maybe you can't boot cos ARB 4 needs custom kernel on pie roms to boot
6. The black screen in fastboot is not a good sign ...sounds like your device got converted from Android 1 to MIUI and it triggered ARB 4
fastboot getvar anti
7. YOU CAN READ UP ON THAT ..all this info is available for our device in this forum and this is very lazy of you and I shouldn't be spoon feeding you .
***You can always sideload or backup sideways
fastboot boot recovery.img
*Go to advanced tab activate adb sideload
adb sideload "filename"
*File must be in adb folder
Click to expand...
Click to collapse
Thanks. I really appreciate your detailed reply. Sorry I didn't answer sooner. I've been unbelievably busy with work and other things and only just logged into XDA again 10 minute ago.
Yes I know it's lazy of me, BUT, a problem I always have with information on roms is that there is so much contradictory information. One post contradicts another a lot of the time, often because methods change over time. Anyway, this leads to me doing the wrong thing and bricking my phones
Thanks again :good:
I got to this link from telegram chat after searching it up. Is this where you are saying I should get Lineageos?
https://github.com/LineageOS
buachaille said:
I got to this link from telegram chat after searching it up. Is this where you are saying I should get Lineageos?
https://github.com/LineageOS
Click to expand...
Click to collapse
https://sourceforge.net/projects/shoukolate-los17-1-builds/files/jasmine_sprout/
KevMetal said:
https://sourceforge.net/projects/shoukolate-los17-1-builds/files/jasmine_sprout/
Click to expand...
Click to collapse
Thanks. Once I get TWRP to stick I will flash this.
buachaille said:
Thanks. Once I get TWRP to stick I will flash this.
Click to expand...
Click to collapse
Sure . It will be easy . Put magisk and twrp.zip and gapps on your PC .
Put recovery.img in the adb folder
1. Connect phone to pc in normal mode and enable adb
2. Open adb and authorize device
3. Adb reboot bootloader
4. Fastboot boot recovery.img
5. Transfer recovery.zip to phone internal
6. Wipe - flash zip - format data - reboot recovery - transfer lineage ROM to phone - flash - flash recovery.zip - format data - reboot to the INACTIVE slot in reboot section ..then choose reboot recovery - flash gapps and magisk - reboot to lineage ...then recovery should be stuck
*If you wanna keep data back it up when you boot recovery first time
**Restore it after all the steps
***Recovery will only stick if you do the data formatting
Use this recovery:
https://drive.google.com/drive/mobile/folders/1NRlv58EiQ_YlMjrpLYKzOqIob2Vq3kYE
I'm on linux but I don't think that makes any difference here.
I've got the fastboot screen fixed. I downloaded and flashed the stock MI image. So I'm pleased with that.
I've flashed 3 different versions of TWRP. 3.4.0.0 and a couple of older ones. 3.4.0.0 gives me the TWRP screen but doesn't actually load into TWRP. With the other I get a black screen. Trying as we speak to fix.
I believe I have the command correct - sudo fastboot boot twrp-3.4.0-0-jasmine_sprout.img
<<edit>> This one worked ------ twrp-3.3.0-0-jasmine_sprout.img
In TWRP now and following your instructions. Would be done by now but rom taking ages to download. Anyway, thanks. I'll post back once I'm done and let you know what happened.
I owe you a post to let you know what happened. It took me hours and hours but it's finally done. I now have the following:
Bootloader image showing as it should (fixed this by using the MI flash tool and restoring a stock rom.
TWRP is installed and hasn't disappeared. I had a hard time with TWRP. The older version, that was the only one I could get to boot up initially, refused to flash a rom. I tried the Lineageos unofficial and the official, but no way. So I used TWRP, to flash the newest version of TWRP, and then it worked.
Lineageos unofficial is installed and rooted with Magisk.
Your list of instructions (quoted below) was extremely useful and I wouldn't have managed with it. Many thanks :good:
Put recovery.img in the adb folder
1. Connect phone to pc in normal mode and enable adb
2. Open adb and authorize device
3. Adb reboot bootloader
4. Fastboot boot recovery.img
5. Transfer recovery.zip to phone internal
6. Wipe - flash zip - format data - reboot recovery - transfer lineage ROM to phone - flash - flash recovery.zip - format data - reboot to the INACTIVE slot in reboot section ..then choose reboot recovery - flash gapps and magisk - reboot to lineage ...then recovery should be stuck
*If you wanna keep data back it up when you boot recovery first time
**Restore it after all the steps
***Recovery will only stick if you do the data formatting
Click to expand...
Click to collapse
I would say that flashing roms has become more complicated during the time I've been away. I think the last phone I used a custom rom on was my Galaxy S5. I can't believe how hard a time I had getting this to work.
buachaille said:
I owe you a post to let you know what happened. It took me hours and hours but it's finally done. I now have the following:
Bootloader image showing as it should (fixed this by using the MI flash tool and restoring a stock rom.
TWRP is installed and hasn't disappeared. I had a hard time with TWRP. The older version, that was the only one I could get to boot up initially, refused to flash a rom. I tried the Lineageos unofficial and the official, but no way. So I used TWRP, to flash the newest version of TWRP, and then it worked.
Lineageos unofficial is installed and rooted with Magisk.
Your list of instructions (quoted below) was extremely useful and I wouldn't have managed with it. Many thanks :good:
I would say that flashing roms has become more complicated during the time I've been away. I think the last phone I used a custom rom on was my Galaxy S5. I can't believe how hard a time I had getting this to work.
Click to expand...
Click to collapse
No yes I understand I had to pick up all what was discussed by trial and error.
Therr are two big changes ..more security measures ...more complicated workarounds.
But the A/B thing is a mission. I converted my phone completely and repartitioned it to A only . Now it has a dedicated recovery partition. And I have an extra 4GB of space .
By the way .Please remember you will need to reflash the twrp zip after every ROM if you don't want to lose it.
KevMetal said:
No yes I understand I had to pick up all what was discussed by trial and error.
Therr are two big changes ..more security measures ...more complicated workarounds.
But the A/B thing is a mission. I converted my phone completely and repartitioned it to A only . Now it has a dedicated recovery partition. And I have an extra 4GB of space .
By the way .Please remember you will need to reflash the twrp zip after every ROM if you don't want to lose it.
Click to expand...
Click to collapse
Thanks for the reminder about reflashing TWRP. I will keep that in mind. I shouldn't be reflashing much now though. I hope I got that out my system last time. I was always changing roms - constantly.
I mainly wanted TWRP installed as I remember sometimes my roms would just go into a bootloop for no reason that I could discover, and I'd need my TWRP backups.
How do you re-partition a Xiaomi. With the MI flash tool? I'm guessing that as I remember I had to do that once with Odin (I always had Samsung phones back then). I was forced to do it as I had bricked my phone much MUCH more seriously than usual. Got it fixed though
I still am quite confused with the A/B thing, but I'll pick it up as I go along I'm sure. For now I'm happy. Rom working fine so I can get on with other things in life.
And thanks again - you totally got me out of the **** :good::good: