Need Help - Huawei P9 Plus Questions & Answers

Hey,
EDIT If i try to flash the system img via dc phoenix or twrp i get an error every time (failed writing) and that only at system flashing everything else gets installed propperly.
so i tried to root my phone and bricked it in the process.
I Unbricked (i thnink) it with dc phoenix.
But the system isnt full there. Like i am missing Keyboards and apps like galerie and other things in that direction.
What can i do ?
i have c432 firmware.
thx

Related

Doogee X5 - TWRP install

Hi,
I'm having a problem installing TWRP on my doogee X5, in order to root the device. I have tried to flash the recovery with sp flash tool, and every time I try, I can boot to the boot mode menu, select "recovery" and see the doogee logo for a while, then a black screen, then the doogee logo again, following into a normal boot.
This is the X5, not the X5 pro.
firmware on phone: "DOOGEE-X5-B-Android5.1-2016.03.18"
Any help?
PS: I don't want to use kingroot to root the phone, as I also want xposed.
I'm looking for a solution to that very problem too. Let's see if someone comes to help!
Exactly the same goes here too. Probably there's not an updated TWRP for V18 which I am using. I have not the slightest idea who could help us.
Rooting Doogee X5 / TWRP install
Here's what worked for me, thought I'd share this.
Out of the box was on version 18 and wanted to root , so i blindly installed King Root which did work, i then installed Supeer SU me which changed the king root to super user. After that over a week i read that TWRP 3.0.2 worked for one person so using Flashify i flashed the recovery image , after changing it to recovery.img and it worked . Such luck right, i went on to read the forums as im in love with this device , Wakefield helpful was NEEDROM.com , you need to register but there are many roms and tools for mediatek 6580soc . Out of curiosity i downloaded some rar. File roms ACS different fish tools. The best to use if you've only got oneX5 is SP flash tool. Also look for mediatek vcom drivers which auto installs the correct drivers. There are easy to follow you tube videos fur flashing using SP Flash tool. The latest version had been updated for simplicity. the process basically is ( load .bin file in its respective area,( from Flash tool) and load scatter.txt in its box ( from rar. File) the whole interface will polemist populate plug go to format hit start plug in turned off phone without battery, it'll give red then yellow bar and a check, then unplug hi to firmware screen and choose to start dload only except bootloader, start , plug wait for coloured bars and check your done. i even had gotten errors due to a faulty dload and repeated the process till i got it. I understand that not all have the patience for this, therefore i suggest using flash tool of king root messes up though that's rare.
An alternative to supersu me is to root with king root then install twrp with flashify then you can uninstall / repack king root and flash Updateroot.Script available by someone on needrom. That includes super user and busy box. Then installxposed. Etc.
* Each process in the above proven tuturial has been obtained online from other sites not just xda. I've chosen 5.1 as an idealOS for me, I can't say the route to take fur Marshmallow.
This is for -b and non b only version 18, and 19. All others take your own chances but it's resilient chip so have fun.
(SOLVED just flash DOOGEE-X5-HOT2-6.0.zip and the twrp from the rom is installed and works after rebooting in recovery mode.) after flashing CWM recovery
Listed: 10/28/2016 11:16 pm
ROM Version: 6.0 / 5.1 to my doogeex5 (flashing succeed) i got an green android logo with an error sighn(see picture)and some chinese letters...
in normal boot no problem,also upgrading to android 6 (flashed) gave no problem...
how to get new recovery(flashing other recovery`s gave same output exept the chinese sighns disapeard)
kingroot V4.80 couldnt root my doogeex5 after 27%rooting it says cant root device
also doesnt the system update in `my device` recognice the memory card ...no sd card inserted...
any suggestions?
I have a similar problem. Unlocking the boot loader works fine, but i can't seem to find a working twrp file for my phone.
I have an X5 pro (x5pro-android5.1-r17-2015.07.01). I tried different twrp recoverys from needrom and i can flash them to the device, but if i try to boot into recovery i only get the robot with the red warning triangle. Rest of the phone works fine, but i'd like to get a working custom recovery.
Can anyone help me?
So i rooted my phone with kingroot and i wanted to install a custom recovery without breaking the device how should i move next ? My X5 is an old motherboard version android 5.1 V15-2015.11.02 and that was the last official fota update for me. Is there any ofgicial upgrade suitable for my model like android 6.0 ? Two more things. My battery goes down rapidly and i dont know if its battery or chargers problem what should i do ?
http://www.needrom.com/category/doogee/serial-x-doogee/x5-doogee/
even without rooted phone you can flash a lot of roms from above link and read how to
Yeah i noticed this site man but says you need to register first. And one more thing spft always detects scatter files as invalid or maybe not legal even from the official site of doogee. I use the spft from doogeemobile site.
I am using SP_Flash_Tool_exe_Linux_v5.1520.00.100 with ubuntu(linux) maybe try an other flashtool edition,registering needrom is simple just making username and make a password when you are registered take the inifix hot 2.6.0 for the x5 flash it and you have got also a TWRP from wich you can root or install also the .zip roms etc.
I mentioned the inifix hot2.6.0 because that was the one i had succes even with a bricked recovery caused by flashing a cwm recovery without rooting first.
Well i just want for sure make a backup of my current rom without wiping it. I guess the infinit will delete all. Plus i also want to install recovery having rooted it 1st which is easy i think on 5.1. I have the one with the old motherboard not the -b. To sum up i want to install the official updated rom V20 via sd (which i tried and didnt work) luckily it didnt brick or via spft which doesnt load scatter file says is not valid no matter if i use latest or older version of spft in order to flash it manually. Its risky to root and install a recovery by an apk without having my rom backed up 1st. And even with the spft i cant do that. I just want to fix my battery status. Thats all. I use xp pro os.
indeed it is hard to install android 5.1 roms on the doogee x5with a twrp,al the 5.1 roms i could flash,but then i bricked the recovery,wich made no differend for the installed 5.1 roms,they just work.i can only install a working twrp by flashing Infinix Hot 2 6.0,wich is a 6.0 rom,but as far as i know you cant install a 5.1 rom with a 6.0 twrp... error 7.
Thats why we will end this discussion for now and wait for future solutions. Thx for your concern man. I just dont want to brick it since it runs smoothly with 5.1. As i said before i wanted to install the latest (official stock) V20 rom recently released. But i cant do it even from the tutorial that exists on their forum. It's a use of spft but i cant manage to do it. Scatter file always invalid.V20 Rom fixes some bugs and displays your interface like on 6.0 android version. We talk mate.
Hello !
Any news on the matter ?
I have got an X5 with Android 6 (!) on it. Have tried to root it with several one-click tools but this does not work.
Any suggestions?
Hi! What room do you recommend The most stable, And best, Under flashtool To Doogee X5? Thanks in advance for help!
hello i need help on my doogee x5 all 6.0 custom rom flash give me error 11 on twrp how to fix please ,
Any help please?
I have error 7 on all rom
Help?
Having tried to install TWRP it is rejected
Having downloaded twrp_x5max.img from needrom and used the adp method of installing the TWRP.img (https://www.xda-developers.com/how-to-install-twrp/). I get the following error message. "writing 'recovery'...
FAILED (remote: download for partition 'recovery' is not allowed".
So How do I get the TWRP img loaded into the Doogee X5Max (not pro) android with marshmallow?
I have tried using SP FlashTool and it says installed successfully, but I still get the default recovery program, after the dead robot with triangle and a exclamation mark inside, when booting into recovery using keys or adb command.
Is there another way of getting this image file loaded into the recovery partition?
I have followed all the set up steps in developers mode, so why cannot I use adb?

Huawei p8 lite 2017 FULL BRICKED

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Forgive me for my english)
Hello everyone....I'm not here asking somebody to help me, I don't think you could. I'm here to advice you not to root a Huawei P8 lite 2017. The story of me bricking this phone is long, I've done lots of passages that I can't remember.
I've read guides, asked help and compared softwares before trying to root my phone, but it has been useless.
I'll explain the main problems occured.
I've unlocked bootloader and then I flashed with fastboot tim win recovery..the version is located in this section about huawei p8 lite 2017. TWRP couldn't backup Data partition, it gave me an error that I couldn't avoid: I think that version is not full compatible with this phone. STOP rooting your phone if you can't backup a partition or if the recovery starts giving you error.
I flashed MagiskSu rootless with twrp. Initially worked properly, (but not all softwares were working with it)...after trying to install viper4android, my OS corrupted...Launcher didn't started anymore when I turned up my phone...I could only see the background and go in settings app....I restored my phone with twrp but it had been useless...I had to format data partition. After that, my phone restored properly.
I was having problem with booting into system...it took every time 66 seconds, and I had only few modules installed. Something were wrong. I installed Apps2sd, but it gave me some problems...sometimes was not able to mount partition or to write the script. Then I did the wrost choice of my life. I allowed this app to edit System partition. All the phone corrupted. I was not able to boot into system after reboot. DON'T ALLOW SOFTWARES TO EDIT SYSTEM PARTITION. Then i restored the phone with twrp, but after this, my phone was damaged: No Audio, No microphone, NO camera working, I couldn't play any video or song....it was corrupted. I've tryed to restore system partition, vendor partition, boot image....everything was useless. I flashed the stock recovery and did factory reset...nothing. I flashed stock boot.img...nothing was working.
I've tryed last chace, to flash all stock rom with adb sideload: adb failed. I tryed with fastboot: failed. I at least tryed to flash manually system, vendor, boot and recovery partition with fastboot....but It ended with my phone totally bricked (I think Fastboot didn't worked properly, it gave me some errors). I had wiped all the partition before doing this...but something tell me that fastboot didn't flashed correctly stock partition.
The only thing that is left in my phone is eRecovery, I can't use usb debug, Third parts can not communicate with the phone. I can only reboot, shutdown, and try to download the "lastest version" from server...but it fails at every try. My phone is not accessible anymore.
My advice is NOT TO ROOT HUAWEI P8 LITE 2017. Wait for developers to create advanced software more compatible with this new device.
Now I want to ask help: is there something I can do right now? Why doesn't erecovery work? Is there something I can do with Huawei Support? I have to sent my phone to restore it?
Hey bro...if your phone's bootloader is unlocked as you said...
You can do those easy steps
Download HUAWEI UPDATE EXTRACTOR 9.9.3
Use it to extract the following partitions
System.img
Recovery.img
Boot.img
And other files that you need and copy them into adb.exe folder
Then boot your phone into bootloader
And then use those commands to flash the partitions
fastboot flash system system.img
And
Fastboot flash boot boot.img
And
fastboot flash recovery recovery.img
The flashing process will take a while on system partition
And then do a factory reset using stock recovery
And then the phone should boot up
Sent from my PRA-LA1 using Tapatalk
0000729399 said:
(Forgive me for my english)
Hello everyone....I'm not here asking somebody to help me, I don't think you could. I'm here to advice you not to root a Huawei P8 lite 2017. The story of me bricking this phone is long, I've done lots of passages that I can't remember.
I've read guides, asked help and compared softwares before trying to root my phone, but it has been useless.
I'll explain the main problems occured.
I've unlocked bootloader and then I flashed with fastboot tim win recovery..the version is located in this section about huawei p8 lite 2017. TWRP couldn't backup Data partition, it gave me an error that I couldn't avoid: I think that version is not full compatible with this phone. STOP rooting your phone if you can't backup a partition or if the recovery starts giving you error.
I flashed MagiskSu rootless with twrp. Initially worked properly, (but not all softwares were working with it)...after trying to install viper4android, my OS corrupted...Launcher didn't started anymore when I turned up my phone...I could only see the background and go in settings app....I restored my phone with twrp but it had been useless...I had to format data partition. After that, my phone restored properly.
I was having problem with booting into system...it took every time 66 seconds, and I had only few modules installed. Something were wrong. I installed Apps2sd, but it gave me some problems...sometimes was not able to mount partition or to write the script. Then I did the wrost choice of my life. I allowed this app to edit System partition. All the phone corrupted. I was not able to boot into system after reboot. DON'T ALLOW SOFTWARES TO EDIT SYSTEM PARTITION. Then i restored the phone with twrp, but after this, my phone was damaged: No Audio, No microphone, NO camera working, I couldn't play any video or song....it was corrupted. I've tryed to restore system partition, vendor partition, boot image....everything was useless. I flashed the stock recovery and did factory reset...nothing. I flashed stock boot.img...nothing was working.
I've tryed last chace, to flash all stock rom with adb sideload: adb failed. I tryed with fastboot: failed. I at least tryed to flash manually system, vendor, boot and recovery partition with fastboot....but It ended with my phone totally bricked (I think Fastboot didn't worked properly, it gave me some errors). I had wiped all the partition before doing this...but something tell me that fastboot didn't flashed correctly stock partition.
The only thing that is left in my phone is eRecovery, I can't use usb debug, Third parts can not communicate with the phone. I can only reboot, shutdown, and try to download the "lastest version" from server...but it fails at every try. My phone is not accessible anymore.
My advice is NOT TO ROOT HUAWEI P8 LITE 2017. Wait for developers to create advanced software more compatible with this new device.
Now I want to ask help: is there something I can do right now? Why doesn't erecovery work? Is there something I can do with Huawei Support? I have to sent my phone to restore it?
Click to expand...
Click to collapse
Flash Huawei ROM with keys.
First search for rollback ROM and flash it then flash full rom.
.
hamzio7 said:
Hey bro...if your phone's bootloader is unlocked as you said...
You can do those easy steps
Download HUAWEI UPDATE EXTRACTOR 9.9.3
Use it to extract the following partitions
System.img
Recovery.img
Boot.img
And other files that you need and copy them into adb.exe folder
Then boot your phone into bootloader
And then use those commands to flash the partitions
fastboot flash system system.img
And
Fastboot flash boot boot.img
And
fastboot flash recovery recovery.img
The flashing process will take a while on system partition
And then do a factory reset using stock recovery
And then the phone should boot up
Sent from my PRA-LA1 using Tapatalk
Click to expand...
Click to collapse
Thank you but I've already done this passages when my phone were soft-bricked. It could have helped me, but now the problem is bigger: any partition is corrupted, there's no way I can go into bootloader, and there's no way I can interact with my phone form a pc
persona78 said:
Flash Huawei ROM with keys.
First search for rollback ROM and flash it then flash full rom.
.
Click to expand...
Click to collapse
I can't flash anything since my phone can not interact with any machine...there's no more recovery partition working, no more system partition working...boot image is ok but I can't boot anything. Fastboot mode works only if system partition works too.
0000729399 said:
I can't flash anything since my phone can not interact with any machine...there's no more recovery partition working, no more system partition working...boot image is ok but I can't boot anything. Fastboot mode works only if system partition works too.
Click to expand...
Click to collapse
Yes, you can recover your device because erecovery is working !
You need a MicroSD card, create a folder/directory named "dload" and inside put the UPDATE.APP ( full firmware for your device ) . Put the MicroSD card into your device and keep pressing at the same time all three hardware buttons ( volume +, volume - and power ) ... your device will start automaticly to install UPDATE.APP - if UPDATE.APP is compatible 100% with your device !
Good luck !
surdu_petru said:
Yes, you can recover your device because erecovery is working !
You need a MicroSD card, create a folder/directory named "dload" and inside put the UPDATE.APP ( full firmware for your device ) . Put the MicroSD card into your device and keep pressing at the same time all three hardware buttons ( volume +, volume - and power ) ... your device will start automaticly to install UPDATE.APP - if UPDATE.APP is compatible 100% with your device !
Good luck !
Click to expand...
Click to collapse
Thank you...I tryied, but didn't work...it says "restore failed"...maybe the UPDATE.APP is not full compatible with my phone. If anybody can give me the update.zip of Huawei P8 lite 2017 PRA-LX1 TIM BRAND (PRA-LX1C55B105), I'm here awaiting for it.
Could I try to flash a No Brand Firmware from dload folder?
Another question to you..could I have done something bad that doesn't allow erecovery to work properly? I didn't touch that partition.
Ok I've done researches and I realized that the firmware of my phone doesn't exist yet. The one I tryed to flash has a very similiar build code but it's different., I noticed it right now, I'm not surprised my phone is dead. I can only wait for developers to put that one on internet.
Or I can try to install from dload folder another firmware that is compatible with my phone...If anybody know something about it, tell me please :/
0000729399 said:
Thank you...I tryied, but didn't work...it says "restore failed"...maybe the UPDATE.APP is not full compatible with my phone. If anybody can give me the update.zip of Huawei P8 lite 2017 PRA-LX1 TIM BRAND (PRA-LX1C55B105), I'm here awaiting for it.
Could I try to flash a No Brand Firmware from dload folder?
Another question to you..could I have done something bad that doesn't allow erecovery to work properly? I didn't touch that partition.
Click to expand...
Click to collapse
Yes, "restore failed !" is because firmware not match 100% your device !
0000729399 said:
Ok I've done researches and I realized that the firmware of my phone doesn't exist yet. The one I tryed to flash has a very similiar build code but it's different., I noticed it right now, I'm not surprised my phone is dead. I can only wait for developers to put that one on internet.
Or I can try to install from dload folder another firmware that is compatible with my phone...If anybody know something about it, tell me please :/
Click to expand...
Click to collapse
I found PRA-LX1C55B120 in firmware finder.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v82870/f1/full/update.zip
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
dominj97 said:
I found PRA-LX1C55B120 in firmware finder.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v82870/f1/full/update.zip
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
Click to expand...
Click to collapse
oh my god, do you know if is it trustable? Do you know if somebody has tryed it? I'm gonna try it right now.
dominj97 said:
I found PRA-LX1C55B120 in firmware finder.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v82870/f1/full/update.zip
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
Click to expand...
Click to collapse
Restore Failed....Again.
Maybe the file you gave me is not the right one, or maybe my phone is not able to restore a phone starting from an updated Firmware like the b120 verision...maybe eRecovery wants the stock version, the b105.
I always do this things: I extract all the contents of update.zip in a folder named "dload" on a SD card...then I put the card into my phone and launch eRecovery. I hope I'm not missing any passage.
Does anybody know is eRecovery needs the stock update of the Firmware to restore it?
Could anybody find the PRA-LX1C55B105 (TIM BRAND = C55) Firmware?
0000729399 said:
Restore Failed....Again.
Maybe the file you gave me is not the right one, or maybe my phone is not able to restore a phone starting from an updated Firmware like the b120 verision...maybe eRecovery wants the stock version, the b105.
I always do this things: I extract all the contents of update.zip in a folder named "dload" on a SD card...then I put the card into my phone and launch eRecovery. I hope I'm not missing any passage.
Does anybody know is eRecovery needs the stock update of the Firmware to restore it?
Could anybody find the PRA-LX1C55B105 (TIM BRAND = C55) Firmware?
Click to expand...
Click to collapse
That firmware is impossible to find. Maybe because it is Tim branded. But don't worry you can flash any firmware, no branded too. You can try as I done the last week, to flash with fastboot system, boot and recovery. These images are present in the update.app of the PRA-LX1C432B110, and you can use huawei update extractor to get that images. Good luck my friend!
Manuele1000 said:
That firmware is impossible to find. Maybe because it is Tim branded. But don't worry you can flash any firmware, no branded too. You can try as I done the last week, to flash with fastboot system, boot and recovery. These images are present in the update.app of the PRA-LX1C432B110, and you can use huawei update extractor to get that images. Good luck my friend!
Click to expand...
Click to collapse
I can't flash anything because my phone is bricked...I can only use eRecovery, and I can not comunicate with my phone with a computer. I have to wait for somebody to extract the Firmware or I don't know.
I've already done the passage you wrote, to flash boot and recovey, when my phone was corrupted but NOT bricked. I restored my phone but it didn't solved issues I was having. Now I can't do anything. I can only use eRecovery.
I am not advising or telling that it would be a good idea, but you could try to install the TWRP-Recovery using the prague.img from the "[How To Root] Huawei P8 lite 2017 [PRA-LX1]-Android 7.0-EMUI 5.0" and if it success then trying to restore the PRA-LX1C432B100 firmare which can be found on "[Request] PRA-LX1 C432 oeminfo".
CAUTION: If you succeed you'll have the two SIM version of the firmware and all info of your original firmware will be lost which means that your warranty will definitely be void (it most likely is already).
jtvu said:
I am not advising or telling that it would be a good idea, but you could try to install the TWRP-Recovery using the prague.img from the "[How To Root] Huawei P8 lite 2017 [PRA-LX1]-Android 7.0-EMUI 5.0" and if it success then trying to restore the PRA-LX1C432B100 firmare which can be found on "[Request] PRA-LX1 C432 oeminfo".
CAUTION: If you succeed you'll have the two SIM version of the firmware and all info of your original firmware will be lost which means that your warranty will definitely be void (it most likely is already).
Click to expand...
Click to collapse
Thank you too...but It's the million time I say: I CAN'T FLASH ANYTHING BECAUSE MY PHONE IS TOTALLY BRICKED.
My phone is totally corrupted, the only thing I can do is to use eRecovery. Every other solution dealing with using PC to do things on phone has been tryied when the phone were SOFT BRICKED, and doesn't work anymore because the phone is at 90% HARD BRICKED.
0000729399 said:
Thank you too...but It's the million time I say: I CAN'T FLASH ANYTHING BECAUSE MY PHONE IS TOTALLY BRICKED.
My phone is totally corrupted, the only thing I can do is to use eRecovery. Every other solution dealing with using PC to do things on phone has been tryied when the phone were SOFT BRICKED, and doesn't work anymore because the phone is at 90% HARD BRICKED.
Click to expand...
Click to collapse
Are you saying that you can't go to fastboot too? Or if you can, it gives you error to every flash? But don't worry, if you can use erecovery, try This: You'll notice that you have to pay for this. Good Luck!
https://funkyhuawei.club/register
Manuele1000 said:
Are you saying that you can't go to fastboot too? Or if you can, it gives you error to every flash? But don't worry, if you can use erecovery, try This: You'll notice that you have to pay for this. Good Luck!
https://funkyhuawei.club/register
Click to expand...
Click to collapse
Thank you so much, I realized that Fastboot was not corrupted!
But...
I tryied to flash system, recovery and boot images, then I did the Factory Reset from recovery...but It didn't worked, my phone bootloops like there's no System installed.
I have two hypotesis: 1) Fastboot is not able to flash properly the system partition on Huawei P8 lite 2017, even though it says that the process has been successful.
2) The system I flashed is not compatible...I extracted the system.img file from a PRA-LX1C55B120 (Found with Firmware Finder), while my version was PRA-LXC55B105....Maybe it pretends the B105, and refuses the B120. But they should be the same thing
This is impossible.
0000729399 said:
Thank you so much, I realized that Fastboot was not corrupted!
But...
I tryied to flash system, recovery and boot images, then I did the Factory Reset from recovery...but It didn't worked, my phone bootloops like there's no System installed.
I have two hypotesis: 1) Fastboot is not able to flash properly the system partition on Huawei P8 lite 2017, even though it says that the process has been successful.
2) The system I flashed is not compatible...I extracted the system.img file from a PRA-LX1C55B120 (Found with Firmware Finder), while my version was PRA-LXC55B105....Maybe it pretends the B105, and refuses the B120. But they should be the same thing
This is impossible.
Click to expand...
Click to collapse
Exclude the first hypothesis, because FASTBOOT is 100% trusted. I think that you need to download from firmware finder this version: PRA-LX1C432B110. This version should work. Unzip the update.zip downloaded and with Huawei Update Extractor get the System, boot and recovery images. Then flash everything with fastboot, like this: Fastboot flash system System.img
Remember that commands are case sensitive so be careful. Good luck!
Manuele1000 said:
Exclude the first hypothesis, because FASTBOOT is 100% trusted. I think that you need to download from firmware finder this version: PRA-LX1C432B110. This version should work. Unzip the update.zip downloaded and with Huawei Update Extractor get the System, boot and recovery images. Then flash everything with fastboot, like this: Fastboot flash system System.img
Remember that commands are case sensitive so be careful. Good luck!
Click to expand...
Click to collapse
ok I'll try right now but why that version should work? Do I have to flash only the system partition?

bricked device with oreo, old unbrick doesnt work

hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
after over 10 hours of fiddeling around a found a really easy solution:
most of you know HWOTA helps with this, but the "normal" version wont work after flashing oreo. but this version is flashed via twrp and is still working!
but you will need a oreo compatible twrp, which you can find here
i know the links are to mate 9 software, but since the p10 and mate 9 are nearly identical, it works on the p10 as well
can you post the step by step guide?
i am on oreo 8.0.0.046 and want to flash another version, or downgrade to nougat because few things don't work on this version
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
failed install twrp- error find twrp 3.0.3, and i replaced to oero mate 9 recovery....
EDIT: success - problem was on the computer
johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
i did sucsses to install twrp but on the second step, when i press on install on twrp, the phone restart to erocovey and failed to find the files. what am i doing wrong?
i think that i am stuck with that version forever....
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
johdost said:
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
Click to expand...
Click to collapse
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
t.h.i said:
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
Click to expand...
Click to collapse
EDIT : the process is sucsses, but its the same version.... 8.0.0.046
Bricked, no TWRP access, any ideas?
Hi.
I know this about a P10, I have a P10 Plus (VKY-L29C605), but the process should be similar, I think.
I bricked my phone after succesfully upgrading from B174 to B321 using HWOTA. After which I decided, since I was at it, to flash the Hyperplus Kernel. This led to a bootloop. To fix it I decided to just go ahead and HWOTA B321 all over again and get over it, and would have probably gone just fine, except I decided to rebrand (C605 > C432) while I was doing that, silly (no, stupid) mistake. This led to the brick I am currently expriencing, I have no recovery access, erecovery or TWRP.
So now I am left trying to unbrick the phone. I extracted the UPDATE.APP for both update_all_hw.zip and update.zip using the Huawei Extractor Tool with no difficulty, except unbricking methods ask for boot.img, which I could not find, so I went along without it and flashed: cust.img, recovery_ramdisk.img (using fastboot recovery_ramdisk command for Oreo), and system.img. All of the commands completed succesfully, but no shebang, still bricked and no recovery access. I figure this has to do with the rebrand as the result after executing the command "fastboot getvar vendorcountry" shows the rebrand pulled through (hw/eu 432).
I am currently downloading HWOTA8.zip (3GB worth of download) to see if I can do something it. I am also downloading the L29C432B360 OTA-FULL, since I believe I am not getting any progress becuase I used the updates for L29C605B321.
The kind people at funkyhuawei told me they could fix it with their tool, but I don't have the money for that right now.
I will post updates, but any ideas would be greatly appreciated.
Many of us have posted over this in the last couple of days. Seems like Funky Huawei unbrick tool was the mehtod to get it work for me. You could try that!
or use dc-phoenix for me it worked (= in the moment i try to capture the usb ports kommunikation so i have the tool with the aktual firmware longer for 3 days :silly:
would first give dc a try 20 bucks for 3 days is ok i think (=
johdost said:
hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
Click to expand...
Click to collapse
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
So I was able to get the C432B360 firmware and I flashed it, but no I can't enter recovery mode because the battery is low (red lightning bolt/red led flash). Anybody know how to charge or force recovery mode boot from fastboot?
If anyone needs, can use my DC-Phoenix account, I don`t need it anymore.
Your username is: cesedy
Your password is: dnL4eHEm
Greting
ure3808 said:
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
Click to expand...
Click to collapse
Greeting,
Can you explain the procedure of how to do it?
Thank you

Brick too Far? After oreo update and failed root, Impossible to get into recovery.

Today, I had successfully updated my L09-C432 (rebranded to L29) to Oreo. I decide to keep going and try to root using the magisk method present in the guide section.
During that process, I had several error, so I decided to flash the ramdisk. I all went downhill from there, impossible to restore any of the images I had on TWRP. Eventually I tried following HWOTA but for some reason. TWRP for oreo is not recognize by ADB on my system, I then decided to launch the upgradeoreo.zip according to this method as I had the files on my SD-card prior. Which led me to be unable to get into fastboot.
I am now left with the following error>
ERROR MODE:
Attention!
Please update system again
green android of death
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
All I have left at this point is a functional fastboot,
I have tried:
fastboot flash recovery_ramdisk recovery_ramdisk.img
fastboot flash kernel kernel.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash ramdisk ramdisk.img
All of which complete successfully but none of them help me get forward. I am left with the same error.
All of which were extracted from the UPDATE.APP of the OREO update I had successfully completed on my phone.
Concerning TWRP:
fastboot flash recovery twrp.img (nougat version) fails.
fastboot flash recovery twrp.img (oreo version) succeeds but I am left with the same error.
fastboot flash recovery twrp.img (HWOTA8 version) succeds but left with the same error.
I have wandered the forums and tried a diversity of suggestion none of them seemed to work in my case.
What are your suggestion to fix this problem?
Any help you can provide is much appreciated.
I can probably find a way to pop my SD_Card into my laptop if necessary.
Same problem here, I have tried multi_tool 8 without any success. Maybe someone you can share a TWRP backup?
I was wondering if the dload method could be an option? Which firmware to use in that case?
There is Huawei official service ROM for P10 Lite and P10 Plus. Cannot find for P10.
Do you think the Funky Huawei unbrick tool would resolve this (($$$, but cheaper than a non-warranty repair...)
If so would I just use the circa 4 GByte update.app file from the update.zip firmware file, rather than the smaller update.app from update_all_hw.zip?
grockstar said:
Do you think the Funky Huawei unbrick tool would resolve this (($$$, but cheaper than a non-warranty repair...)
If so would I just use the circa 4 GByte update.app file from the update.zip firmware file, rather than the smaller update.app from update_all_hw.zip?
Click to expand...
Click to collapse
I tried the dload method that is a no go. Besides the other option DC-phoenix (which is a pay mehtod as well ) I feel like these are our last resort.
grockstar said:
Do you think the Funky Huawei unbrick tool would resolve this (($$$, but cheaper than a non-warranty repair...)
If so would I just use the circa 4 GByte update.app file from the update.zip firmware file, rather than the smaller update.app from update_all_hw.zip?
Click to expand...
Click to collapse
And yes you should use the 4.3GByte update.app file. Are you trying the tool? If so, let us know how it works out! It is the next step for me.
martindoublem said:
And yes you should use the 4.3GByte update.app file. Are you trying the tool? If so, let us know how it works out! It is the next step for me.
Click to expand...
Click to collapse
Well, I coughed up the cash to FunkyHuwawei and have made some progress....
After using their unbrick tool, I now have access to eRecovery, and am pondering the best way to fully flash the ROM.
The Funky Huawei eRecovery method doesn't seem to work (I did change my router's DNS as instructed), and I'm hesitant to try the manual update method again given the issues people seem to be having with it.
Any suggestions?
grockstar said:
Well, I coughed up the cash to FunkyHuwawei and have made some progress....
After using their unbrick tool, I now have access to eRecovery, and am pondering the best way to fully flash the ROM.
The Funky Huawei eRecovery method doesn't seem to work (I did change my router's DNS as instructed), and I'm hesitant to try the manual update method again given the issues people seem to be having with it.
Any suggestions?
Click to expand...
Click to collapse
Well I guess I am going to fork up the cash too. ($100 in one day for him, not bad eh?)
Can you restore TWRP? maybe you can follow the HWOTA method without the first couple of steps? Also, can you not recover using the dload method then or just download the software from the recovery?
Well I can confirm, the fix worked splendidly, it got me in erecovery where I was able to delete the userdata (unfortunate but perhaps necessary).
Then a couple of reboots and I am back in an Android. So happy!
martindoublem said:
Well I guess I am going to fork up the cash too. ($100 in one day for him, not bad eh?)
Can you restore TWRP? maybe you can follow the HWOTA method without the first couple of steps? Also, can you not recover using the dload method then or just download the software from the recovery?
Click to expand...
Click to collapse
So it looks like the unbrick tool actualy installed the full ROM correctly - I can't have been giving it enough time to boot.
However the first time it booted the DPI was screwy just as it was after I mistakenly flashed the P10+ Oreo ROM (maybe the data partition hadn't been wiped). But a quick factory reset and all's well, and I'm over the moon to have rescued my phone with a little (i.e. lot) of help from FunkyHuawei - and a bit of cash.
Now to decide whether I want/need to risk rooting again...
grockstar said:
So it looks like the unbrick tool actualy installed the full ROM correctly - I can't have been giving it enough time to boot.
However the first time it booted the DPI was screwy just as it was after I mistakenly flashed the P10+ Oreo ROM (maybe the data partition hadn't been wiped). But a quick factory reset and all's well, and I'm over the moon to have rescued my phone with a little (i.e. lot) of help from FunkyHuawei - and a bit of cash.
Now to decide whether I want/need to risk rooting again...
Click to expand...
Click to collapse
Rooting is where it all went to **** for me. I am staying the hell away from it until a lot of people confirm it works fine!
Are you having only limited functionality as well? It seems like we have to reinstall the update data file as well as the update hw file?
martindoublem said:
Are you having only limited functionality as well? It seems like we have to reinstall the update data file as well as the update hw file?
Click to expand...
Click to collapse
Limited in what respect? Mine seems fine so far - the radios work (cellular, WiFi, Bluetooth) and the system and the few apps I've tried so far are working as expected.
The notification toolbar is gone? Is that normal? Did i miss out on android removing them?
martindoublem said:
The notification toolbar is gone? Is that normal? Did i miss out on android removing them?
Click to expand...
Click to collapse
Nope, my notification toolbar is working.
A factory reset fixed some weirdness for me, but you said you'd wiped userdata in eRecovery which I guess has the same effect?
used the dc-phoenix tool with the one part Update and now my phone is back (= it is worth it 20 bucks because i have now 3 days for testig and rebuilding (=
martindoublem said:
Today, I had successfully updated my L09-C432 (rebranded to L29) to Oreo. I decide to keep going and try to root using the magisk method present in the guide section.
During that process, I had several error, so I decided to flash the ramdisk. I all went downhill from there, impossible to restore any of the images I had on TWRP. Eventually I tried following HWOTA but for some reason. TWRP for oreo is not recognize by ADB on my system, I then decided to launch the upgradeoreo.zip according to this method as I had the files on my SD-card prior. Which led me to be unable to get into fastboot.
I am now left with the following error>
ERROR MODE:
Attention!
Please update system again
green android of death
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
All I have left at this point is a functional fastboot,
I have tried:
fastboot flash recovery_ramdisk recovery_ramdisk.img
fastboot flash kernel kernel.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash ramdisk ramdisk.img
All of which complete successfully but none of them help me get forward. I am left with the same error.
All of which were extracted from the UPDATE.APP of the OREO update I had successfully completed on my phone.
Concerning TWRP:
fastboot flash recovery twrp.img (nougat version) fails.
fastboot flash recovery twrp.img (oreo version) succeeds but I am left with the same error.
fastboot flash recovery twrp.img (HWOTA8 version) succeds but left with the same error.
I have wandered the forums and tried a diversity of suggestion none of them seemed to work in my case.
What are your suggestion to fix this problem?
Any help you can provide is much appreciated.
I can probably find a way to pop my SD_Card into my laptop if necessary.
Click to expand...
Click to collapse
Go to rescue mod, you plug in your device in computer, and hold vol down and pow button, than you go in rescue mod, and use fastboot to repair your device.
Can confirm DC-Phoenix and only for 20eur.
ure3808 said:
Go to rescue mod, you plug in your device in computer, and hold vol down and pow button, than you go in rescue mod, and use fastboot to repair your device.
Click to expand...
Click to collapse
Ha! you are funny! Several of us mentioned here that fastboot didn't work in our case to repair the device.

{SOLVED}PLEASE READ Bricked My phone. A help please **URGENT**

**URGENT** i have my p20 pro 6/128 with 9.0 last version ROOTED somehow i found a article.. the root was success. Tried to flash official twrp with twrp app and then everything was like HELL.
If i let my phone boot says error! func no: 10 boot image. error no :2 load failed. i faced something simillar when trying to get into recovery sometimes.
I can get into erecovery cant format or download official firmware. I can get into fastboot, download mode. I am gonna tell you everything . every program i tried AND FAILED!
TRIED: multi tool for huawei ( i download a version i think its 165 something when i press flash selected the program closed)
TRIED: to FLASH like 10 times ramdisks, recoverys, CANT FIND BOOT.IMG.
TRIED: Re-flash 9.0 says missing zip files THATS IMPOSIMPLE NOTHING IS MISSING I AM SURE
TRIED: a guide that said to download firmware and i would find a folder named DLOAD. i did everything. COULDNT FLASH SOMETHING ON DOWNLOAD SAYS ERROR
TRIED: ALMOST EVERYTHING
PLEASE HELP ME, HOW TO FIX IT? its very important for me and for everyone who is facing the same problem
Phone infos From Multi tool program http://prntscr.com/min398
and the firmwares i tried 1) http://prntscr.com/min3tn
2) http://prntscr.com/min40j
SEE SOME POSTS BELLOW TO SEE HOW I FIXED IT SUCCESS AFTER MANY ERRORS
1 found this post, and flashed all of them BUT there is not ramdisk on the files. i looked on two different firmwares which should i flash over ramdisk which doesnt exist?
first i run the command fastboot flash kernel kernel.img and i could boot into TWRP for first time. now i cant.
there are not errors for now. only if i boot my phone says phone keeping booting.
when i got to twrp and tried to reboot into system said there is no OS.
How and which os i should flash? since Multi tool program kicks me
HELP
https://forum.xda-developers.com/honor-9/help/help-softbricked-h9-oreo-t3750282
So you're typing a little erratic.
Can you get to eRecovery? This is your best option..
If not then you'll need to reflash all the parts of the OS back to the phone manually..
Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.
dladz said:
So you're typing a little erratic.
Can you get to eRecovery? This is your best option..
If not then you'll need to reflash all the parts of the OS back to the phone manually..
Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.
Click to expand...
Click to collapse
i can get into erecovery i cannot download the official and flash it throught there says error.. what else i can do
I cant understand what yyou saying here Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.
I get into Erecovery if i press download latest version and recovery after some times when i put the wifi pass says error. Error i got also on HIsUite when i tried to format from there and download the latest versio. So we go manually but HOW? i tried almost everything
i tried this https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
success all command went trhough the phone
the problem is i cannot flash twrp
my phone has unlocked bl
well i did a lot of search if you ask me i download 5-7 different programs that can flash stock firmware. ONE seems to be legit for 9.0 RE-flash 9.0 which has commands on its script like this guy says and he helped me too
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
also if someone cant boot into twrp after the frist steps and see the erecovery just format everything from erecovery and then it will boot to twrp.
also now says installing update.
i hope imeis serial numbers etc wont lost..
Thats the script i found i dont remeber where
http://prntscr.com/mitvum
but i can upload somewhere the files
if you run FLASH.bat and says MISSING ZIPS then remove the update."zip" {ZIP PREFIX FROM THE NAME OF THE FILES ONLY} and run again the bat
the procedure may take 10-30 mins
What about the otg method?
Also I would never use a tool like this.
StonebridgeGr said:
**URGENT** i have my p20 pro 6/128 with 9.0 last version ROOTED somehow i found a article.. the root was success. Tried to flash official twrp with twrp app and then everything was like HELL.
If i let my phone boot says error! func no: 10 boot image. error no :2 load failed. i faced something simillar when trying to get into recovery sometimes.
I can get into erecovery cant format or download official firmware. I can get into fastboot, download mode. I am gonna tell you everything . every program i tried AND FAILED!
TRIED: multi tool for huawei ( i download a version i think its 165 something when i press flash selected the program closed)
TRIED: to FLASH like 10 times ramdisks, recoverys, CANT FIND BOOT.IMG.
TRIED: Re-flash 9.0 says missing zip files THATS IMPOSIMPLE NOTHING IS MISSING I AM SURE
TRIED: a guide that said to download firmware and i would find a folder named DLOAD. i did everything. COULDNT FLASH SOMETHING ON DOWNLOAD SAYS ERROR
TRIED: ALMOST EVERYTHING
PLEASE HELP ME, HOW TO FIX IT? its very important for me and for everyone who is facing the same problem
Phone infos From Multi tool program http://prntscr.com/min398
and the firmwares i tried 1) http://prntscr.com/min3tn
2) http://prntscr.com/min40j
SEE SOME POSTS BELLOW TO SEE HOW I FIXED IT SUCCESS AFTER MANY ERRORS
Click to expand...
Click to collapse
dladz said:
What about the otg method?
Also I would never use a tool like this.
Click to expand...
Click to collapse
like i said in the first post the otg method with the dload folder failed.
Why you wouldnt try it?
StonebridgeGr said:
like i said in the first post the otg method with the dload folder failed.
Why you wouldnt try it?
Click to expand...
Click to collapse
Because I've got no need to mate, manual is always safer.
Have you asked in the thread where you got the tool?
I'm not sure what else to suggest pal
dladz said:
Because I've got no need to mate, manual is always safer.
Have you asked in the thread where you got the tool?
I'm not sure what else to suggest pal
Click to expand...
Click to collapse
now everything is fine but i cant root..
StonebridgeGr said:
now everything is fine but i cant root..
Click to expand...
Click to collapse
Everything is fine? What did you do?
With root Judy follow the instructions that have worked for other people. Don't rush things.
dladz said:
Everything is fine? What did you do?
With root Judy follow the instructions that have worked for other people. Don't rush things.
Click to expand...
Click to collapse
i post i early post a link that helped me a little bit i think i edited the .bat script
also i made a video and post about rooting and everything is fine.
the problem is you can have twrp and magisk root both:/
either you have root and not twrp or either you have twrp and not root

Categories

Resources