Hello all
I am trying to find my perfect case here. I usually have a vertical flip case for my phones, but with my Note 2, I plan on using the Otterbox Commuter (or Defender) case. I will also have a Spigen Ultra Oleophobic screen protector on my device.
Even though I will have a screen protector on, and a rugged case, I still want to have a flip cover. The phone will be in my pocket, but hey, a screen protector can only do so much.
What I am looking for, is an Otterbox type case (in terms of ruggedness), with a flip cover (preferably vertical, but horizontal is fine).
So far I have come up with nothing. If I order a Noreve case, it will protect my device, but I don't know how much abuse the device will be able to take. I am used to devices with recessed screens, but when I went to the HD2, that was a whole new ball game.
I modified a no-name silicon bumper to work with my official samsung flip-cover. I also had a no-name hard plastic screen protector. I ditched the silcon bumper for daily use as it made it stick to the lining of pockets. The no-name cheap hard plastic screen protector is however still on.
It cost me about 2 dollars, was simple to apply (it almost falls into place without bubbles, lint) and is almost invisible -when the screen is on. It is visibly marked to some extent when the screen is black so i intend to splash out another 2 dollars in a couple of weeks. I could buy a 10 pack i suppose and change every other month if i needed to at that price
I wanted the protection Otterbox gives, but I also wanted the sleek look of a leather wallet case. So I decided to MacGyver it and combine the two.
The Otterbox Defender you can't really find a discount on, you're paying $40 -$50 after shipping, I think I got mine on eBay.
The leather wallet case however varies tremendously! The one I got was $13 and i've seen them as high as $60. You can find them as cheap as $5-$6 This was the exact model I got:
http://www.cecompass.com/black-flip...tore=default&gclid=CNjZo_qSsbUCFUid4AodvRYAmw
The problem being the included plastic "phone holder" in the leather wallet case is too small once I got the Otterbox case on my Note II. With brute force I ripped the cheap plastic phone holder out of the leather case. I went to target and purchased 2 packs of 12 velcro squares, cost me about $5 total. I also used and would recommend using super-glue to glue the velcro squares both to the leather case and the corresponding area on the Otterbox case, you'll need the extra holding power!
I had to glue velcro on the closing strap too, as the case I got had a magnetic closure that no longer held with the addition of the Otterbox Defender case.
I also found the need to cut pieces of the leather case. The first being the edge near the S-Pen holder. It was too narrow for my fingers, cutting the corner off of it solved that problem. I also cut some of leather away from near the flash. While the case doesn't interfere with the camera visual field, sometimes the flash will catch the edge of the case and produce instant unwanted shadows. After cutting the leather, I used a black sharpie to color in the bare leather in the areas I cut which worked brilliantly =)
The result is the perfect solution for me. I have the elegance and usefulness of the black leather wallet case, and the protection of the Otterbox Defender. Also The wallet case folds backwards to pop and hold the Note II horizontally, perfect for watching Youtube, Netflix, or any video you want to watch. If anyone is interested, I'll take some more detailed pictures of where I put the velcro and the cut mods I made to the leather case.
defender
if you see anyone looking for a otterbox defender in black for the galaxy note 2, I have an extra one that I was gonna get rid of for 35.00 shipped new in package, ended up with 2 after the holidays, thanks, otterbox is a great protector, I highly appreciate mine...
nutpn said:
if you see anyone looking for a otterbox defender in black for the galaxy note 2, I have an extra one that I was gonna get rid of for 35.00 shipped new in package, ended up with 2 after the holidays, thanks, otterbox is a great protector, I highly appreciate mine...
Click to expand...
Click to collapse
I will be getting the note 2 tomorrow and I am looking for an otterbox for it.
Anybody using the tech21 cases commonly found at the tmobile stores?
I searched around and only saw one post, not much else... Any opinions?
http://forum.xda-developers.com/g4/accessories/leather-t3120658/page5 theres a user who posted pic of his leather back phone in it. i should be getting mine by mail from tmo but its one of the few case i know that support the leather back without any issues
Fits very well. Also bought tech21 screen protector and it has a small strip that leaves screen uncovered for case use. Screen protector is smooth as glass but I will warn you it smudges like crazy.
If anyone buy it, could you show me the link? Thanks in advice.
I bought the Tech 21 "EVO Wallet" from the local T-Mobile store for my leather-backed G4. I needed SOMETHING to protect the phone, and that seemed to be the best option that was available in the T-Mobile retail store. It worked okay, but I didn't like the case. The fit was good, and I think it protected the phone pretty well, but I didn't like the fold-over flap. I like to hold my phone one-handed a lot, and the flap just got in the way.
I wound up ordering the Verus THOR case from Amazon for $14.99 with Amazon Prime: http://smile.amazon.com/gp/product/B00VGZSS9S
I like the Verus case a lot better. It fit very well with my leather-backed G4, and although it doesn't seem as rugged as an OtterBox Defender, it still seems pretty rugged. Unfortunately, the silver color that I picked out doesn't go very well with the brown leather back, so I may be finding a different back once they become available.
Edit: Here's a link to the Tech 21 case I was using: https://www.tech21.com/lg-g4-case-evo-wallet-black.html
I'm using Tech21 Evo Tactical at the moment,waiting for more choices for wireless charging cases.
It fits well and Tmo only charged $20 for it.
https://www.tech21.com/lg-g4-case-evo-tactical-black.html
Hello!
Currently I'm using
Spigen Slim Armor:
http://www.amazon.com/gp/product/B01AUR18D0?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00
IQ Shield Matte
http://www.amazon.com/gp/product/B01BG2ELRI?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
Its working horribly, there's bubble in all corners (See photos attached). If i'm not mistaken the spigen case is pushing hard on the corners top and bottom.
Is this happening to some of you guys?
What combination of case and screen protector are you guys using so that this doesn't happens?
Thanks in Advance
I have been using the ZAGG invisible shield hd dry combined with a Supcase Unicorn Beetle Pro.
I LOVE this combo.
The screen protector went on relatively easily. did that day one. no bubbles anywhere and it's super clear. it wrapped around the sides easily with the special applicator included in the box. this is NOT a typical credit card squeegee install. I had it just like that for a few days until the case showed up.
What i like about this case is the two part sandwich effect. There is a frame that clips on the front of the phone and the whole ting then inserts into the back. sort of like the ottorbox cases. only half the price. The frame completely protects the edges of the screen protector, i don't thing there really is a way to accidentally rub on the edges of the screen protector and work it loose.
And bonus, it works in my QI wireless charger with no problems whatsoever.
I've got the IQ shield non matte and a Ringke Fusion Crystal case. It's shock simple and has dust covers.
Case > https://www.amazon.com/dp/B01A16BCMW/ref=cm_sw_r_other_awd_bTE6wb4Q9ZZK8
Sent from my SM-G935V using Tapatalk
mvpulsts said:
I have been using the ZAGG invisible shield hd dry combined with a Supcase Unicorn Beetle Pro.
I LOVE this combo.
The screen protector went on relatively easily. did that day one. no bubbles anywhere and it's super clear. it wrapped around the sides easily with the special applicator included in the box. this is NOT a typical credit card squeegee install. I had it just like that for a few days until the case showed up.
What i like about this case is the two part sandwich effect. There is a frame that clips on the front of the phone and the whole ting then inserts into the back. sort of like the ottorbox cases. only half the price. The frame completely protects the edges of the screen protector, i don't thing there really is a way to accidentally rub on the edges of the screen protector and work it loose.
And bonus, it works in my QI wireless charger with no problems whatsoever.
Click to expand...
Click to collapse
Does the zagg protector should help in case of drops? And is it as good as a tempered glass in that case?
Sent from my SM-G935F using Tapatalk
I don't know about best combo (because this is my first combo) but I have the Spigen Ultra Hybrid crystal clear and the Skinomi TechSkin on my gold platinum S7 Edge and so far so good. I just installed the Skinomi last night since I got it yesterday. My Spigen case I've had on the phone since March 5th when the case arrived. I ordered both products from Amazon.
The Skinomi I had did the same as the op, as for the Zagg HD amazon refunded my order yesterday saying something was wrong the product and they were canceling it.
Sent from my SM-G935V using Tapatalk
I got a similar case for my S7E ... Spigen Tough armor with the Armour Suit Military Shield... still awaiting my phones frm T-mobile
Zagg HD Dry front and back with Otterbox Symmetry Clear Series
My UAG case pushed the top right corner had to trim just a little. This case seems to be more screen protector friendly. Both cases are pretty much identical is size. The otterbox is much stiffer and back seems more scratch resistant, the UAG is already scratched. UAG offers a little more screen protection in the corners and the buttons are much easier to press. Pics are taken on top of the UAG case for size comparison.
Bodyguardz HD Curved with the UAG ICE, No problems with the protector peeling.
AndroiderM said:
My UAG case pushed the top right corner had to trim just a little. This case seems to be more screen protector friendly. Both cases are pretty much identical is size. The otterbox is much stiffer and back seems more scratch resistant, the UAG is already scratched. UAG offers a little more screen protection in the corners and the buttons are much easier to press. Pics are taken on top of the UAG case for size comparison.
Click to expand...
Click to collapse
Any problems with the Otterbox peeling up the sides of the protector?
felloffthetruck said:
Any problems with the Otterbox peeling up the sides of the protector?
Click to expand...
Click to collapse
Nope, everything is laying down with no signs of peeling. The zagg did stay on the phone for 3 days with no case while I was waiting for Amazon to deliver and I did blow dry the edges. I don't think this made a difference, otterbox just seems like it sits on top protector better. The case seems to lack screen protection though, the raised edge on top and bottom of screen is only about 1/16 thick. I've never broke a phone but this might be a deal breakerbreaker for some.
I don't have a way of taking taking a pic right now, but I have the Spigen Tough Armor on my GS7E with a Skinomi MatteSkin screen protector.
The Skin has may be 1-2 mm taller than optimal, I have just the slightest push from the case on the top of the skin, but that could also be my fault for not as well aligning the skin as possible. Tough call. I'll probably be putting a new skin on this week anyway just because I'm OCD about it.
addendum 2016/3/23: replaced the MatteSkin last night and put the Tough Armor back on this morning. Alignment seems good. One 'speck' maybe under the skin near the top under the Samsung logo, you'll see some squiggles there where I was working against it this morning to see if it was a bubble that could be pushed out. {shrug}
Fit between the two seems *tight* but *may* be good or great.
After putting the Tough Armor back on I got some push against the bottom left edge of the MatteSkin but a few passes with a spudger seems to have smoothed it back out. See if it stays.
The inner edge of the Tough Armor on the front top/bottom seems tight and sharp-edged where it meets the phone. If this was backed off 0.5mm-ish there would definitely be no issue.
I know some don't like how much the Tough Armor stiffens up the buttons on the sides, but that works in my favor as it cuts down on unintended activation when the phone is in a backpack or pocket, and the shape of the Armor edge makes for a nice flat stance when using the kickstand or otherwise leaning on the side.
Final word: 97% perfect fit. The case ended up pushing the bottom of the screen protector a bit, the inner most lip edges on the Tough Armor was about 1 mm too far to play nice with the MatteSkin. Trimming the edge of the case with a sharp knife though does resolve it, if you can do that with a truly even hand it probably would be a great combo, my hand isn't that perfect so I had a bit of an irregular edge. Worked well though, otherwise.
I'm currently using the IQ Shield HD Wet screen protector:
http://www.amazon.com/gp/product/B01BG2EJYS?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
With the SUPCASE Unicorn Beetle Rugged Full Body Case:
http://www.amazon.com/SUPCASE-Full-...sr=1-1&keywords=galaxy+s7+edge+unicorn+beetle
I just received the Tech21 Frame case in the mail so will be seeing if that works well with the screen protector. Unfortunately I have heard it doesn't but here's to hoping.
Update: Tech21 Frame case will indeed push up on the edges of the screen protector.
The best screen protector I have used to date is from bestskinsever and their customer service is top notch. It isn't noticble at all and the cutouts are scary accurate.
I have ordered some from xtremeguard and the cutouts are too big and I ended up tossing them. The other brand I tried was some from illumni and they scratch up real easy, the fit was better than extremeguard but not by that much and their customer service sucked.
http://www.bestskinsever.com/samsung-galaxy-s7-skin
Here's the Symmetry with the Bodyguardz HD curved.
ipaq_101 said:
The best screen protector I have used to date is from bestskinsever and their customer service is top notch. It isn't noticble at all and the cutouts are scary accurate.
I have ordered some from xtremeguard and the cutouts are too big and I ended up tossing them. The other brand I tried was some from illumni and they scratch up real easy, the fit was better than extremeguard but not by that much and their customer service sucked.
http://www.bestskinsever.com/samsung-galaxy-s7-skin
Click to expand...
Click to collapse
I just ordered the case friendly and edge to edge to see which one I like better. I agree, their screen protectors are top notch.
Zagg HD Dry + Speck Candyshell Clear
Only been on 24 hrs but it looks like a win so far. Both are seriously good quality products, but then they better be for the price.
Galaxy S7 Edge Case, Spigen® [Ultra Hybrid] AIR CUSHION [Crystal Clear] Clear back panel + TPU bumper for Samsung Galaxy S7 Edge (2016) - 556CS20034 with the hollow bumpers in the corner works well with screenknight protector.
Obliq Naked Shield Black + ArmorSuit MilitaryShield FullScreen Extreme Clarity HD
Case : Obliq Naked Shield
Screen : ArmorSuit MilitaryShield
While I like the look of the Skinomi MatteSkin on the screen I wanted to try something else, for comparison. So I got the ArmorSuit and put it on, along with the Obliq case - changing over from a more stealth to more bling kind of look, truly.
Both the case and shield are a very nice fit for the device. Not as large nor thick as the Tough Armor I had been using, time will tell whether that's good or bad.
The ArmorSuit screen protector, once on and de-bubbled basically disappears. It's only the 1st day of use but it's very much NOT there, visually.
The Obliq case is also very lean, and the back is very clear, letting the look of the silver phone I have glare out at you.
Combined they seem to work seamlessly together. I was concerned in particular because the ArmorSuit is a full coverage, and not their case-friendly version, however in this case they seem to be working well together. I truly must have gotten lucky with the screen protector install because I literally can't see the edges of it vs the edges of the Obliq case. Nice.
The Obliq is NOT as much protection as the Tough Armor, to be sure, but it is prettier and alters the ergonomics and looks of the phone dramatically less.
The Obliq DOES appear to be a "fingerprint magnet" though ... time will tell.
The ArmorSuit does NOT appear to be a fingerprint magnet, which is nice. It is very glossy/reflective though, as a couple of the pics I've attached show.
I initially had this Roya kickstand case.. plus this tempered glass protector
I've decided to give the iq shield (not the matte one) a try per some recommendations on here.. hoping sensitivity is at least "close" to having no protector (like with regular phones + tempered).. i've had iq shield in the past and its been solid though i seem to recall sensitivity taking a hit.
I'm going with the Beetle Pro Full case (not hybrid one).. i guess its harder to get off if you use gear vr.. but i saw a rumor if you cut the bumpers off near the usb on gear vr a case may fit, unsure.
I saw the Spigen with kickstand.. it looks similar to the Beetle Pro.. can anyone comment on how slippery it is, or if its got a good grip like the Beetle Pro (full) and protects the edges too (easier to get off maybe)? Spigen appears to not have edge protection, so similar to Beetle Hybrid ($11.99 vs Spigen at $17.99).. I would think the Beetle Pro Hybrid would make more sense price wise.
I guess if you get the $99 2 year accidental damage samsung warranty then the hybrid is a no brainer.
So the LK brand clear tpu case and omoton TPG screen protector is a great match for this phone. I feel very confident at work(electrician)on it's protection. All for under 15$ on amazon
So far after the first week it has no scratches on case or screen and it goes in and out of my dirty pockets about 100 times a day.
Update 8/26/17
Just got the uag outback case.fits great and doesn't interfere with the screen protector. This case was 25$ and I would say it's definitely worth it. Slim with great grip
Man I have to say uag killed it with the outback case for the z2. It reminds me of my Glock 42...but it's my z2f.
Went with Verizon tgp + tech 21 impact mesh (white) case, very little gap between them. So far excellent pairing ?