Database Develop

L29-C432B380 needed

Well i done goofed... installed LOS 15.1 from the mate 10 and now i can't go back to stock..
can someone get me the system and boot image and the recovery?
i've looked arround but wasn't able to found

B380? I didn't know that this is released. The last update I know for VTR-L29C432 is B360.
I had a similar problem a few days ago and found a solution by @Blackball (I hope I'm allowed to post is work here):
For this solution you need a SD card, TWRP and the B360 update files (file1, file2, file3).
Download the file from this post by @Blackball.
- Unzip the OREO_FLASH.zip to your SD card.
- Place the three update files into the OREO_FLASH directory on your SD card and rename them as following:
- update.zip stays update.zip
- update_data_full_public.zip to update_data_public.zip
- update_full_VTR-L29_hw_eu.zip to update_all_hw.zip
- The OREO_FLASH directory should now contain all needed files:
oreo_update.zip, update.zip, update_all_hw.zip, update_data_public.zip, OREO_NoCheck_VKY.img.
- Install provided TWRP with "fastboot flash recovery_ramdisk TWRPPATH.img".
- Now insert the SD card and boot into TWRP recovery.
- Tap on install, choose the OREO_FLASH directory and install the oreo_update.zip.
The script installs the original Oreo recovery from the P10Plus (for me, it was working on my P10, VTR-C432! BUT NO WARRANTY FOR THIS!!!).
The recovery installs the update without a online validation.
For me it was working perfectly and now I'm on B360. BUT, again, NO WARRANTY!
I hope it's working for everyone and I hope that @Blackball isn't mad about my tutorial!
Thank you very much Blackball for your good work!

Thanks Jannomag and Blackball... This is Perfect :good:

Jannomag said:
B380? I didn't know that this is released. The last update I know for VTR-L29C432 is B360.
I had a similar problem a few days ago and found a solution by @Blackball (I hope I'm allowed to post is work here):
For this solution you need a SD card, TWRP and the B360 update files (file1, file2, file3).
Download the file from this post by @Blackball.
- Unzip the OREO_FLASH.zip to your SD card.
- Place the three update files into the OREO_FLASH directory on your SD card and rename them as following:
- update.zip stays update.zip
- update_data_full_public.zip to update_data_public.zip
- update_full_VTR-L29_hw_eu.zip to update_all_hw.zip
- The OREO_FLASH directory should now contain all needed files:
oreo_update.zip, update.zip, update_all_hw.zip, update_data_public.zip, OREO_NoCheck_VKY.img.
- Install provided TWRP with "fastboot flash recovery_ramdisk TWRPPATH.img".
- Now insert the SD card and boot into TWRP recovery.
- Tap on install, choose the OREO_FLASH directory and install the oreo_update.zip.
The script installs the original Oreo recovery from the P10Plus (for me, it was working on my P10, VTR-C432! BUT NO WARRANTY FOR THIS!!!).
The recovery installs the update without a online validation.
For me it was working perfectly and now I'm on B360. BUT, again, NO WARRANTY!
I hope it's working for everyone and I hope that @Blackball isn't mad about my tutorial!
Thank you very much Blackball for your good work!
Click to expand...
Click to collapse
well I do know this method, I've used it on nougat multiple times but I don't want to reformat my phone a 9th time this week ?
I just want the recovery to flash it on its partition

and @Jannomag it's B360 you're right i'm doing it right now..
my themes stopped working and the heath app didn't open

everything worked just fine thanks for letting me know and thank you @Blackball for the script to get it working

Make ZIP file for unlock Bootloader/flashable by TWRP (ONLY Official Rom&Nougat 7.x)

Hi
All people know when we unlocked bootloader and flash custom Recovery or TWRP never can to install any update file or official Rom.
Because on zip file are some script's file for controlling install processes and when you unlocked your device this script blocking other install's script's.
Device need to other script's for installing rom completely.
When This script no matched by TWRP or custom Recovery we can't to install official Rom..:crying::crying:
So what to do now ?
But before : I try and try all method and idea for make that way to convert Oreo Rom but i can't .... so sorry
i try and make one package with problem (when phone run up after flash Rom the bootlogo frame was reverse... and supersu dont install on file system because when i run phone with recovery mod data portion not mount on TWRP and can,t read that portion so you can't install any mode file and supersu file on system.
I know and I learn to all how to convert official Rom file from zip for lock device to zip for unlock device
installable by TWRP.
You Need read this post completely and then you can convert all other update Rom for unlocked devices (Just for Zenfone 4 Max - X00ID)
Now ...
I learn 2 way for converting
Way 1: with PC(computer) and windows:good:
Before You Need:
1- PC(computer)
3- Winrar program
4- Official Rom file (just Download from ASUS Site)
5- Scripte file ( Download from Below )
Let's go
1- Download official Rom from ASUS site on your PC.
2- Open zip file with Winrar and go to { META-INF } and { com } and { google } and { android }
3- Now on folder have 2 file's, Find and select this file "updater-script" and press delete key on your keyboard and wait to app doing process complete. now on this folder are 1 file, keep opening winrar on { android } folder, we must copy downloaded script on this folder.
4- now download script file ( updater-script ) from below.
5- When the download was completed select file ( updater-script ) and hold left click and drag and drop to winrar window for place script file ( updater-script ) on to folder { android } and wait to app doing process complete, now again on { android } folder have 2 file.
Ok:good: you make your Rom:highfive:
Copy to external device and flash on your zenfone
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Way 2: By Android :fingers-crossed:
Need: ES file Explorer
Now Start ...
1- Download script file ( updater-script ) from below and official Rom from ASUS site on your Device and Internal storage. (Sample I downloaded this Rom file : UL-ASUS_X00ID-WW-14.2016.1803.233-user.zip )
2- Open ES File Explorer now find downloaded Rom file and Extract zip file you must extracting that to internal storage. (Sample: I extracted file "UL-ASUS_X00ID-WW-14.2016.1803.233-user.zip " to internal storage)
3- Go to extracted folder and find this folder "META-INF" (Sample : after extract I go to folder "UL-ASUS_X00ID-WW-14.2016.1803.233-user" and find folder "META-INF" )
4- open folder and go to { META-INF } and { com } and { google } and { android }.
5- now on folder are 2 file, Find and delete this file "updater-script" and now have 1 file.
6- Now copy downloaded script file "updater-script" to { android } and past on folder, Ok now again are 2 file .
7- Back to extracted folder and checking have all this file and folder : {on extracted folder are 2 folder: 1- firmware-update / 2- META-INF } and { 5 other file } that must be 7 item.
8- Now select all 7 item, file's and folder's and select three points item on top right and select compress item.
9- Now app opening new window and you must change item to zip and change compress level: best and press : Ok now wait to compressing all file's.
Note: after doing compresses all file's complete, open zip file and check on zip file, you must see 7 item after open zip (if after opening zip file you see just one folder and after click on folder you see 7 item you must delete zip file, because that file don't work. just after opening zip you must see all 7 item.
Now copy to External storage and flash on your device.
woow !!!!! you make Rom for unlocked device!!!!
Download's :
1- Script File For Nougat 7.x.x :https://drive.google.com/open?id=1fkMo93VIl6GiDYMWGcziJEj6J46YtqjR
2- Script File For Oreo 8.x.x (TESTing/Unreleased) :https://drive.google.com/file/d/1EKjhIx_hstmnS3pyjKydb9E5IJ-NK_Cr/view?usp=sharing
3- ES File Explorer Pro:https://www.dl.farsroid.com/app/ES-File-Explorer-Pro-1.1.4(www.farsroid.com).apk
4- WinRAR:https://dl2.soft98.ir/soft/w/WinRAR.5.50.exe?1523969926
for extract winrar app you need password type this :
soft98.ir
Don't Forget Press Thanks key From Down of the Post :angel:
END
​
XDA:DevDB Information
Make ZIP file for unlock Bootloader/flashable by TWRP (ONLY Official Rom&Nougat 7.x), Tool/Utility for the Asus ZenFone 4 Max
Contributors
اسماععیل
Version Information
Status: Stable
Current Stable Version: 1.5
Stable Release Date: 2018-04-17
Created 2018-04-17
Last Updated 2019-02-14

Reserved

Reserved

Thanks You.
:good: Thanks so much. Please! give me to access your script file :angel:

oakob168 said:
:good: Thanks so much. Please! give me to access your script file :angel:
Click to expand...
Click to collapse
I uploaded on my drive and I inserted to download box
Can't you download that file
If you can't, I attach that to next post
You just click on download link
Script will be download

I got it. Many Thanks again :fingers-crossed:

Hi, can you share how to unlock the Bootloader of Zenfone 4 Max (ZC554KL)? I'm currently using .226 as a build number.

thanks it works..

Now that we finally have Android 8.1 for this device someone could perhaps volounteer to test if this method works.

i already try but its failed error 6 i think we need new file of update cript for 8.1.0

error 6 to the new update oreo please update the scrip

igerup said:
Now that we finally have Android 8.1 for this device someone could perhaps volounteer to test if this method works.
Click to expand...
Click to collapse
Sorry for the late reply
no work for Andorid 8.1.0
wait for ....
i try to find best script for run installer

jenere said:
error 6 to the new update oreo please update the scrip
Click to expand...
Click to collapse
that script just for android 7
no work on android 8
new script coming soon just give me some time to test that

james1206 said:
i already try but its failed error 6 i think we need new file of update cript for 8.1.0
Click to expand...
Click to collapse
script just for android 7 no work on android 8 wait to new script

mr Mahshad
اسماععیل said:
script just for android 7 no work on android 8 wait to new script
Click to expand...
Click to collapse
I tried something that will maybe work. I removed the first line of the original 8.1.0 script. I removed the IF statements that verifies if the device is compatible. Maybe this tip could help in some cases? But i'm also experimenting some scripts that may actually work, I'll give my feedback if ever it works bruh, cheers! :fingers-crossed:
---------- Post added at 10:28 AM ---------- Previous post was at 10:02 AM ----------
Ohh and if you've notice on the new update file there are no certificates on the META-INF folder aso you might wanna check that out

For this to work we need to find out how to unlock the bootloader. I have tested with "fastboot flashing unlock" and "fastboot oem unlock" and the only result is a reboot followed by factory reset that can't be stopped. Bootloader remains locked afterwards. Any custom recovery or rooting is impossible with 8.1.0 on this phone.

igerup said:
For this to work we need to find out how to unlock the bootloader. I have tested with "fastboot flashing unlock" and "fastboot oem unlock" and the only result is a reboot followed by factory reset that can't be stopped. Bootloader remains locked afterwards. Any custom recovery or rooting is impossible with 8.1.0 on this phone.
Click to expand...
Click to collapse
Dudem I just freakin flashed it. IT WORKED! but there's a VERY BIG DOWN SIDE
It made me enter a password I never placed. so basically it's locked. so what I did was to flash userdata via fastboot which was a little bit difficult. but dude It worked! although it sucked that my data was resetted back to original. but it worked!
PM me if you want the new script and the fastboot flasher. BTW I'm a Filipino

I allready have 8.1.0 installed and working. I had to edit the scriptfile to be able to install on a rooted firmware 237. Oreo refused to recognise my phone as an ASUS_X00ID . I'm mostly interested in this updater script so I can flash future updates if (and that's a very big if) a functioning bootloader unlock and root method is discovered.

igerup said:
I allready have 8.1.0 installed and working. I had to edit the scriptfile to be able to install on a rooted firmware 237. Oreo refused to recognise my phone as an ASUS_X00ID . I'm mostly interested in this updater script so I can flash future updates if (and that's a very big if) a functioning bootloader unlock and root method is discovered.
Click to expand...
Click to collapse
actually I think I have made a batch file that could maybe answer your "unlocked bootloader"

Interesting. I'm willing to test it.

Cannot find ramdisk/boot.img from Update.zip

I recently bricked my EVA-AL00 from installing Magisk and I'm using Tecalote's post (https://forum.xda-developers.com/showpost.php?p=77560239&postcount=27389) to resolve it.
I downloaded the update zip file (first result on https://pro-teammt.ru/firmware-database/?firmware_model=eva-al00&firmware_page=0), extracted, then used the Extractor software to extract UPDATE.APP. However, the Extractor tool did not show either ramdisk.img or boot.img. Only files are: CURVER.img, EFI.img, PACKAGE_TYPE.img, SHA256RSA.img, VERLIST.img, VERSION.img, crc.img and cust.img.
Could someone please help me find the right file?

george.tian said:
I recently bricked my EVA-AL00 from installing Magisk and I'm using Tecalote's post (https://forum.xda-developers.com/showpost.php?p=77560239&postcount=27389) to resolve it.
I downloaded the update zip file (first result on https://pro-teammt.ru/firmware-database/?firmware_model=eva-al00&firmware_page=0), extracted, then used the Extractor software to extract UPDATE.APP. However, the Extractor tool did not show either ramdisk.img or boot.img. Only files are: CURVER.img, EFI.img, PACKAGE_TYPE.img, SHA256RSA.img, VERLIST.img, VERSION.img, crc.img and cust.img.
Could someone please help me find the right file?
Click to expand...
Click to collapse
It must be FullOTA-MF, not OTA-MF, you must first unzip update.zip and then open update.app by Huawei Update Extractor.
You can also download b540 FullOTA from Firmware Finder, see eg
https://forum.xda-developers.com/showpost.php?p=78511904&postcount=1261
IMO, would be better to obtain support if you asked through HWOTA7 thread
Anyway, on my Mega, there are various stock kernels, ramdisks, etc from b535, b539 and b540, including b540 ramdisk patched for Magisk v18.
I've been using it and several other users and it worked fine
https://mega.nz/#F!JwkVyRya!Rb7OUE0z3PEpXBRxGOM-vQ
However, if you recived OTA Patch02 for b540, you will need to patch/install Magisk by checking both Preserving Encryption and Preserving AVB - for b535, b539 and b540 before Patch02, Preserving AVB was not needed. (only Preserve Encryption)
I'm currently back on b535, but with OTA Patch02, you can find on my Mega also its patched ramdisk, but again, because of Patch02, it was needed now to check also Preserve AVB.
If you are already on b540 with Patch02, I"m not sure if its stock ramdisk is the same as for b540 before Patch02 (probably yes, because OTA Patch02 was only few MB)
You can also extract ramdisk from your currently installed firmware directly from Oreo TWRP, go to Advanced, Terminal and use the command
Code:
dd if=/dev/block/bootdevice/by-name/ramdisk of=/external_sd/ramdisk.img
Extracted ramdisk.img will be saved to external SD card.
You can do the same from TWRP also for kernel and system - however, not for data partition (since TWRP lacks support to read encrypted data partition)

Hey please I'm looking for boot _recovery_crc.img

Eteon x said:
Hey please I'm looking for boot _recovery_crc.img
Click to expand...
Click to collapse
Hi there,
Without information about which device you have (model number, Android version, build number, custom version) it is not possible to give you a suitable tip.
It would also be helpful to know why you need a specific image.
Up to Android 7 there was a boot.img and a recovery.img, as well as a recovery2.img.
From Android 8 on there was no longer a boot.img, but instead the ramdisk.img. And for the recovery the so-called recovery_ramdisk.img.
Both images are different for each firmware, which is why precise information is necessary. The images can be extracted from the Update.App.
To do this, the firmware suitable for the device must be downloaded.
A xxx.crc.img is meaningless because it's just a checksum and not an image to flash!

Tecalote said:
Hi there,
Without information about which device you have (model number, Android version, build number, custom version) it is not possible to give you a suitable tip.
It would also be helpful to know why you need a specific image.
Up to Android 7 there was a boot.img and a recovery.img, as well as a recovery2.img.
From Android 8 on there was no longer a boot.img, but instead the ramdisk.img. And for the recovery the so-called recovery_ramdisk.img.
Both images are different for each firmware, which is why precise information is necessary. The images can be extracted from the Update.App.
To do this, the firmware suitable for the device must be downloaded.
A xxx.crc.img is meaningless because it's just a checksum and not an image to flash!
Click to expand...
Click to collapse
I was trying to flash an XML file from a board firmware using IDT and it's showing me that

Eteon x said:
I was trying to flash an XML file from a board firmware using IDT and it's showing me that
Click to expand...
Click to collapse
Your Screenshot shows a Huawei p10 VTR Board firmware.
But this Thread is for P9, not for P10.
Is your device a Huawei P10?
Please ask in the Huawei P10 Forum.
I can't help you with IDT flashing method.
I worked for such cases only with ChimeraTool and sometimes with DC Phoenix. (Both are paid Services)

Need root. Global version

Hey guys, I bought RM3 few days ago.
I want to root it.
It's the global version. Can anyone please make a video on how to root global version of RM3? PLEASE

Thread is here - https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148

Texan1 said:
Thread is here - https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148
Click to expand...
Click to collapse
Can you please make a video?
I'm on global version. Why do I have to install Chinese version?

Saurabh Kash said:
Can you please make a video?
I'm on global version. Why do I have to install Chinese version?
Click to expand...
Click to collapse
Easy setup
Download magisk
Search magisk on google
Sorry can't post links
Download your current global zip file
Extract zip file , copy boot.img and put it into you internal storage phone
Now open magisk and press install, Then batch boot file. Then select your boot.img
A new boot file will be added to your download folder named. Boot_patced.img
Now open you cmd , and flash your new boot_patched.img
And thats it your rooted

em902566 said:
Easy setup
Download magisk
Search magisk on google
Sorry can't post links
Download your current global zip file
Extract zip file , copy boot.img and put it into you internal storage phone
Now open magisk and press install, Then batch boot file. Then select your boot.img
A new boot file will be added to your download folder named. Boot_patced.img
Now open you cmd , and flash your new boot_patched.img
And thats it your rooted
Click to expand...
Click to collapse
I'm new to this kinda stuff and don't wanna mess things up. Can you please make a video?

em902566 said:
Easy setup
Download magisk
Search magisk on google
Sorry can't post links
Download your current global zip file
Extract zip file , copy boot.img and put it into you internal storage phone
Now open magisk and press install, Then batch boot file. Then select your boot.img
A new boot file will be added to your download folder named. Boot_patced.img
Now open you cmd , and flash your new boot_patched.img
And thats it your rooted
Click to expand...
Click to collapse
Please make a video for international Asia version. And I couldn't find link to global rom

em902566 said:
Easy setup
Download magisk
Search magisk on google
Sorry can't post links
Download your current global zip file
Extract zip file , copy boot.img and put it into you internal storage phone
Now open magisk and press install, Then batch boot file. Then select your boot.img
A new boot file will be added to your download folder named. Boot_patced.img
Now open you cmd , and flash your new boot_patched.img
And thats it your rooted
Click to expand...
Click to collapse
And will I still get ota update after root?

Saurabh Kash said:
And will I still get ota update after root?
Click to expand...
Click to collapse
No.
A suggestion: don't. You obviously don't know a lot about rooting and stuff and RM3 is a bit atypical amongst android phones, so it's more risky.
Why do you need root anyway?

Nightpwish said:
No.
A suggestion: don't. You obviously don't know a lot about rooting and stuff and RM3 is a bit atypical amongst android phones, so it's more risky.
Why do you need root anyway?
Click to expand...
Click to collapse
To restore my important backup that I made with titanium and to use theme engines because dark in built theme isn't working on my phone

Saurabh Kash said:
To restore my important backup that I made with titanium and to use theme engines because dark in built theme isn't working on my phone
Click to expand...
Click to collapse
I will say this the above posted is the only way to root global. If an OTA comes out you better not try to update. What you will have to do is BACKUP anything important to you, complete uninstall Magisk and modules, go into fastboot relock the bootloader which will factory reset the phone then update via OTA, re-unlock the bootloader and re-root with the updated boot.img which you will have to download.... Especially important if OTA updates security patch. You have to understand custom ROMs are developed for rooting, stock ROMs are not.... Hence all the trouble.

Hi,
Two things worth mentioning :
- it seems the procedure indicated to rrot does not work with EU v. 1.15 ; I just tried and phone reboots, but with no root
- rooting the phone will not allow OTA. You will get notified of an update, but the update will not apply to the end.
Regards.

trying to update android version from 10 to 11. please help!

hello.
I'm look for a way to upgrade android version from 10 to 11.
build number: QKQ1.200419.002.WW_PHONE-17.0822.2005.11
-I can't use auto update
-I can't use manual update (transferring Raw file to internal storage and then install it from the os), it keeps giving my a fail error
thank you

blabla15rul said:
hello.
I'm look for a way to upgrade android version from 10 to 11.
build number: QKQ1.200419.002.WW_PHONE-17.0822.2005.11
-I can't use auto update
-I can't use manual update (transferring Raw file to internal storage and then install it from the os), it keeps giving my a fail error
thank you
Click to expand...
Click to collapse
You can't install RAW files from internal storage, you have to flash it from Fastboot. Auto updating should work if you update incrementally up to whatever version you're looking to end at, unless there is an issue that's not detailed in your post.

blabla15rul said:
hello.
I'm look for a way to upgrade android version from 10 to 11.
build number: QKQ1.200419.002.WW_PHONE-17.0822.2005.11
-I can't use auto update
-I can't use manual update (transferring Raw file to internal storage and then install it from the os), it keeps giving my a fail error
thank you
Click to expand...
Click to collapse
First update to WW-17.0823.2104.147 by putting the fw zip downloaded from asus site.
Then update to the A11 fw WW-18.0410.2106.138 by putting the fw zip downloaded from asus site.
Else you can use twrp latest build.
1. Just download the last A11 stable fw that is WW-18.0410.2203.201 from asus website.
2. Put the zip in Internal storage.
3. Boot to twrp recovery.
4. Click on Install > Select the zip file > Swipe to flash. (You will see in which slot the zip is flashing)
5. After flash done, (just don''t reboot). Go to Reboot Section of twrp> Change Slot to the other one via clicking on Slot name.
6. Now do same as 4.
7 After flash done. Just Reboot to system

Hello
I also recommend https://forum.xda-developers.com/t/...ck-twrp-factory-image-stock-recovery.3358711/
Regards

Automatic updates
Sagar Sharma01 said:
First update to WW-17.0823.2104.147 by putting the fw zip downloaded from asus site.
Then update to the A11 fw WW-18.0410.2106.138 by putting the fw zip downloaded from asus site.
Else you can use twrp latest build.
1. Just download the last A11 stable fw that is WW-18.0410.2203.201 from asus website.
2. Put the zip in Internal storage.
3. Boot to twrp recovery.
4. Click on Install > Select the zip file > Swipe to flash. (You will see in which slot the zip is flashing)
5. After flash done, (just don''t reboot). Go to Reboot Section of twrp> Change Slot to the other one via clicking on Slot name.
6. Now do same as 4.
7 After flash done. Just Reboot to system
Click to expand...
Click to collapse
Apologies for the delayed answer
Well, the first method you suggested worked perfectly
Thank you so much!!!

iS Anyone Have A12 Flash Raw File?

lvl0rde said:
iS Anyone Have A12 Flash Raw File?
Click to expand...
Click to collapse
I already told you i have A12 raw.
But you need to message me in my telegram id.
As i don't have enough internet to upload in a cloud storage and give you the link.

Sagar Sharma01 said:
I already told you i have A12 raw.
But you need to message me in my telegram id.
As i don't have enough internet to upload in a cloud storage and give you the link.
Click to expand...
Click to collapse
What Was Ur Telegram account?