Related
How far is your Galaxy s stable?
mine just hits the 1.1GHZ, beyond that only crashes no matter which voltage i Use. please Use the poll so we have a good picture of what the average galaxy s is capable of..
also comment which version of SGS you are using and 8gb/ 16 Gb etc..
i9000m
PS this thread should be moved to General
had mine at 1.54ghz running MIUI with tk glitch kernel.
was amazingly fast, but my phone got hot quick, i dont like OC'ing i feel it may do more harm than good in the long run.
others may and will disagree but thats my opinion on it
Mine with 1.3GHz OC and some Undervolt is perfectly stable.....
simone201 said:
Mine with 1.3GHz OC and some Undervolt is perfectly stable.....
Click to expand...
Click to collapse
Agree with the chef ...
Although I can overclock to 1540MHz it does get hot and Im sure it will do damage in time ..
1300MHz is a great overclock ...
It will be interesting to see what my SGS 2 can be safely overclocked to
1.2 GHz seems ok for me - with UV
Doesn't really get hot.
Running mine @ 1440 MHz with MIUI but i think I can go higher if I want . I have the 8 GB version
1.3 and very stable and with great performance both q score caffiene mark and in daily use
Which voltage are you using?
Mine seems to freeze on voltages above the 1.3V,
above the 1.2 GHZ always freezes. I,m using darkeys 9.5 Rom.
someone some advice which rom is the best for OC, (just for benchmarking) for once.
rixsta said:
Agree with the chef ...
Although I can overclock to 1540MHz it does get hot and Im sure it will do damage in time ..
1300MHz is a great overclock ...
It will be interesting to see what my SGS 2 can be safely overclocked to
Click to expand...
Click to collapse
Mine can handle up to 1.3-1.4ghz
Im getting stable speeds of 1.7ghz. Im on watercooling though..
Sent from my GT-I9000 using XDA Premium App
1.4ghz is my max for full stability. 1.5ghz works fine (no reboots), but the CPU occasionally gives an invalid result during calculations, e.g. during benchmarks like linpack, results can sometimes be inaccurate; 1.44ghz also seemed to work, but I picked 1.4ghz max for longevity/reliability.
UV Values are:
100mhz - 200mV UV (750mV)
200mhz - 150mV UV (800mV)
400mhz - 100mV UV (950mV)
800mhz - 75mV UV (1125mV)
1ghz - 50mV UV (1200mV)
1.2ghz - 50mV UV (1300mV)
1.3ghz - 0mv UV (1400mV)
1.4ghz - 50mV UV (1400mV)
Max UV were found by starting from 100mhz Max frequency, decreasing UV until stable for 5 minutes of software decoding of 720p MKV, and then increasing Max frequency one step. Occasionally the previous step UV needed to be decreased by 25mV to obtain a stability at the next frequency step.
i9000M (16GB)
Guys, if you wanna push your phones to their full stability limits- play on Shadow Guardian game...)
Sent from my GT-I9000 using XDA App
I can run my SGS stable at 1540 MHz with glitch kernel in MIUI 1.5.20 ROM.
Total stability in a 48 hours stress test.
Enviado desde mi GT-I9000 usando XDA Premium App
Mine is stable at 1.5 Ghz with a 200mv undervolt, but only if I select it as a single frequency.
For multiple frequencies, I was stable at 1.4Ghz on an earlier kernel, but it's slightly unstable now... I'll probably try tweaking the governor.
I'm on a i9000m using tk-glitch's V9D-VC and CM7 #11 build.
By the way, shouldn't this thread be in general?
I am on MIUI v3 and CM7_SGSMTD_platypus-kernel_20110522_r0_quorra-prer11_test4-r2 kernel.
I don't use undervolt settings and 1.2 Ghz is fine for me; above values generally don't work stable.
By the way, 1.2 ghz is almost enough for all games and operations, I did not run into that pushing apps for high oc's.
Regards.
1.44GHz, extremely smooth and stable!
Never seen an option to go above 1.54, but 1.54 works flawlessly so I've chosen 1.5 in the poll. (16gb i9000)
1.3-1.4 GHz tkglitch kernel Miui v3
Sent from my GT-I9000 using XDA Premium App
It's not the ROm it's the KERNEL who can oc, i adviise using XAN, hardcore kernels in 2.2. or gto's ginger kernel at 2.3 they are stable and 1280 i guess it's the limit not to warm up
But a questin what send me an undervoltage config, to 1300 if the gpu games work for someone at 1300mhz
.
fstluxe said:
Which voltage are you using?
Mine seems to freeze on voltages above the 1.3V,
above the 1.2 GHZ always freezes. I,m using darkeys 9.5 Rom.
someone some advice which rom is the best for OC, (just for benchmarking) for once.
Click to expand...
Click to collapse
Hello! This is my first kernel, The UnleaZhed XTZ Kernel. I'm a noob in developing a kernel, so some bugs may be found in this kernel and I may not be able to fix them! One more important thing, this kernel uses the sources from some developers and I'm here to present my greatest thanks to everyone of them!
FLASH AT YOUR OWN RISK!!
UnleaZhed XTZ Kernel
Requirements:
4.4.2 Xperia Tablet Z Wi-Fi version (SGP311/312)
Unlocked bootloader
Fastboot driver installed computer
Features:
CPU overclock up to 1836MHz
CPU UV by 100 default
CPU UV control
GPU overclock up to 450MHz (due to some bandwidth problem)
Use auto CPU hotplug instead of MP-Decision
Some minor things
!!recovery has resolution problem ATM!!
Click to expand...
Click to collapse
Installation:
1. Make your Tablet Z in fastboot mode
2. On your computer, open cmd and navigate to the location of kernel
3. Type "fastboot flash boot Kernel_name.img
4. Type "fastboot reboot"
5. Enjoy!
Downloads:
UnleaZhed XTZ v0.1
UnleaZhed XTZ v0.1.1
UnleaZhed XTZ v0.2
Credit:
DoomLoRD
thalamus
Sony
Faux123
Source:
My Github
Nice try but do you have any plans for an aosp kernel?i like overclock and the extra features but it is too tough to say goodbye to pac rom
pangiotis24 said:
Nice try but do you have any plans for an aosp kernel?i like overclock and the extra features but it is too tough to say goodbye to pac rom
Click to expand...
Click to collapse
Will do but it may be done in the next month, Thanks for your suggestion.
First of all THANK YOU for spending your time on this and sharing your result with us!
Just flashed the kernel! Good news...nothing is bricked
CPU Spy Plus indeed shows 1836 Mhz used! I did´t do anything for that.
You might re-think this. Using 1512Mhz instead by default and let the users choose that high speed CPU mode themselves as it may not be stable on all devices.
That 324Mhz added is a huge step...there is no step in between possible?
What about voltages. Did you modify anything? Is the voltage raised to achieve the high cpu frequency? Please post some more information about what happens here...
In fact I´m just running Antutu to see general stability on my device.
VERY BAD score. Before your kenel there were 20300 points. Now with OC only 19746.
=====================================================================
EDIT: Just recognized.... several questions are being answered by Antutu CPU Master.
1512 IS USED by default!
1620Mhz and 1728 Mhz are there to choose and of course finally the 1836Mhz.
Scaling is interactive by default (changed to my fav ondemand)
I/O Scheduler is cfq by default (changed to my fav noop)
Antutu Score @ 1836Mhz: 16077Mhz ???
Lower than without OC? Needs retesting (14230 point when setting max to 1836Mhz and Min to 1512Mhz(!!!???)...maybe the benchmark is wrong...Will give it some time to see if I myself feel a speedup.
After Restart Antutu Score ends up @ 19761 points...not bad. but clearyl not enough looking at the massice OC done. REBOOT! Tab just rebooted! So 1836Mhz is not stable at mine! Trying 1728Mhz now instead.
18139 points....this kernel lacks some serious power if we can believe the scores of antutu. This is a V0.1 so nothing to worry too soon. You´ll make it find it´s power
Switched back to kernel from pulser_g2 (http://forum.xda-developers.com/showthread.php?t=2444452) and 19908 points without any OC! You may look into it.
But please answer the other questiones I wasn´t able to clear myself.
Greetings
Rodger
DJ-Tumor said:
First of all THANK YOU for spending your time on this and sharing your result with us!
Just flashed the kernel! Good news...nothing is bricked
CPU Spy Plus indeed shows 1836 Mhz used! I did´t do anything for that.
You might re-think this. Using 1512Mhz instead by default and let the users choose that high speed CPU mode themselves as it may not be stable on all devices.
That 324Mhz added is a huge step...there is no step in between possible?
What about voltages. Did you modify anything? Is the voltage raised to achieve the high cpu frequency? Please post some more information about what happens here...
In fact I´m just running Antutu to see general stability on my device.
VERY BAD score. Before your kenel there were 20300 points. Now with OC only 19746.
=====================================================================
EDIT: Just recognized.... several questions are being answered by Antutu CPU Master.
1512 IS USED by default!
1620Mhz and 1728 Mhz are there to choose and of course finally the 1836Mhz.
Scaling is interactive by default (changed to my fav ondemand)
I/O Scheduler is cfq by default (changed to my fav noop)
Antutu Score @ 1836Mhz: 16077Mhz ???
Lower than without OC? Needs retesting (14230 point when setting max to 1836Mhz and Min to 1512Mhz(!!!???)...maybe the benchmark is wrong...Will give it some time to see if I myself feel a speedup.
After Restart Antutu Score ends up @ 19761 points...not bad. but clearyl not enough looking at the massice OC done. REBOOT! Tab just rebooted! So 1836Mhz is not stable at mine! Trying 1728Mhz now instead.
18139 points....this kernel lacks some serious power if we can believe the scores of antutu. This is a V0.1 so nothing to worry too soon. You´ll make it find it´s power
Switched back to kernel from pulser_g2 (http://forum.xda-developers.com/showthread.php?t=2444452) and 19908 points without any OC! You may look into it.
But please answer the other questiones I wasn´t able to clear myself.
Greetings
Rodger
Click to expand...
Click to collapse
Sorry for my late,
I've tested Antutu with 1512MHz and 1836MHz. For my Tablet Z, I got ~20000 (1512MHz) and ~23000 (1836MHz).
My Tablet Z has fast binning CPU. Can you please tell me which binning your CPU is? Thank you!
hard to tell...did taht thing in Terminal emulator....it tells me "1".
Not fast or slow or anything...
DJ-Tumor said:
First of all THANK YOU for spending your time on this and sharing your result with us!
Just flashed the kernel! Good news...nothing is bricked
CPU Spy Plus indeed shows 1836 Mhz used! I did´t do anything for that.
You might re-think this. Using 1512Mhz instead by default and let the users choose that high speed CPU mode themselves as it may not be stable on all devices.
That 324Mhz added is a huge step...there is no step in between possible?
What about voltages. Did you modify anything? Is the voltage raised to achieve the high cpu frequency? Please post some more information about what happens here...
In fact I´m just running Antutu to see general stability on my device.
VERY BAD score. Before your kenel there were 20300 points. Now with OC only 19746.
=====================================================================
EDIT: Just recognized.... several questions are being answered by Antutu CPU Master.
1512 IS USED by default!
1620Mhz and 1728 Mhz are there to choose and of course finally the 1836Mhz.
Scaling is interactive by default (changed to my fav ondemand)
I/O Scheduler is cfq by default (changed to my fav noop)
Antutu Score @ 1836Mhz: 16077Mhz ???
Lower than without OC? Needs retesting (14230 point when setting max to 1836Mhz and Min to 1512Mhz(!!!???)...maybe the benchmark is wrong...Will give it some time to see if I myself feel a speedup.
After Restart Antutu Score ends up @ 19761 points...not bad. but clearyl not enough looking at the massice OC done. REBOOT! Tab just rebooted! So 1836Mhz is not stable at mine! Trying 1728Mhz now instead.
18139 points....this kernel lacks some serious power if we can believe the scores of antutu. This is a V0.1 so nothing to worry too soon. You´ll make it find it´s power
Switched back to kernel from pulser_g2 (http://forum.xda-developers.com/showthread.php?t=2444452) and 19908 points without any OC! You may look into it.
But please answer the other questiones I wasn´t able to clear myself.
Greetings
Rodger
Click to expand...
Click to collapse
How is the battery life?
Sent from my SGP311 using XDA Premium 4 mobile app
Destroyedbeauty said:
How is the battery life?
Sent from my SGP311 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Don´t know....after the disastrous performance of the first release I of course switched back to stock.
Now there is the new version which does not cut performance in stock mode.
I´ll OC now to 1728 Mhz and see how it performs with that....battery life is not really good with stock so if you are already asking...FORGET ABOUT alternative kernels not optimized for battery.
That is why I don´t use CM oder AOKP on my Note1. I just eats the battery for breakfast....
OK OC just seemed to scale...20300 points (ca. 19300 at stock speed)...trying 1836 Mhz now.
17389 points....clear drawback....possibly because my device seems to have a bad CPU from what I´ve learned....wanted to use the 17xx Mhz anyway....oops....device just rebooted....my device just isn´t capable of the max cpu setting. :crying:
Anyway the working 1728 Mhz working is great news!
Will give it further testing...
I have two APQ8064 devices, Nexus 4 and Tablet Z. Nexus 4 is 0 (slow), it will reboot sometimes even on [email protected], the Antutu would force close and red light of death would happen if you ignore it and attempt to run again. While my Tablet Z is 2 (fast), this can run at [email protected] and got 23XXX in Antutu.
I don't have an idea which frequency can the 1 (nominal) APQ8064 clock at, but I think [email protected] will be OK. Also, keep eyes on the CPU float-point section in Antutu. At 1512Mhz, it is around 2000. At 1836MHz, it is around 2200. If this drop lower, just pull up the voltage BUT NOT TOO MUCH!!!
Sent from my SGP312 using xda app-developers app
Raising voltage is not an option to me. But anyway...which app do you use for that on tablet Z?
What App do you use for cou control?
I use No-frills. Do you change "interactive" and or "cfq"?
Numbers right after reboot and stopping some unused apps...just stock apps running...
2729 / 930 / 1112 / 1050 / 511 / 927 / 1436 / 5278 / 696 / 600
>>> 15269 points @ stock !!!
switching back to stock....
DJ-Tumor said:
Raising voltage is not an option to me. But anyway...which app do you use for that on tablet Z?
What App do you use for cou control?
I use No-frills. Do you change "interactive" and or "cfq"?
Click to expand...
Click to collapse
I would like to know this as well. Also, how do you check to see which processor you have? (0,1,2; slow, nominal, fast)
Sent from my Xperia Tablet Z
Spartoi said:
I would like to know this as well. Also, how do check to see which processor you have? (0,1,2; slow, nominal, fast)
Sent from my Xperia Tablet Z
Click to expand...
Click to collapse
What is the terminal command to find out? I also considered custom retelling to add some processing oomph. On a per app basis, but reading this... Stock SGP311 on 4.2.2 is chugging fine just north of 20000 points on Antutu. Can we compare Versions? Mine is 3.3.1. I faintly recall reading they mixed up some benchmarking internals because some corporations found loopholes to cheat / inflate scores on new to market devices, maybe that's the discrepancy there?
Another wild thought, could there maybe be, aside from different CPU Models, different kinds of cache / memory scattered through the devices? Would not be the first time a sub par. Cache/Memory bottleneck severely strangled a nominally and factually quicker CPU into much lower overall results. Much depends on weighting within Antutu
Man, what happened with your kernel? We need some stock kernels for 4.3
Sent from my SGP312 using XDA Premium 4 mobile app
So here many custom ROM's
https://forum.xda-developers.com/mi-max-2/development/available-stock-custom-roms-mi-max-2-t3737523
Which of this the best for gaming? I don't care about my battery life or something else, only good optimization for games :laugh:
Also mb someone know how to tune Kernel Adiutor for gaming, is any guides or something else? i don't found any of this for Mi Max 2
It would be great, if u help
Without a custom Kernel, nothing much can be tuned in Kernel Adiutor to achieve higher performance in games. OC-ing the GPU and CPU would be probably the only solution to gain more FPS. All this ROMs are gonna perform similar with the same kernel.
ekin_strops said:
Without a custom Kernel
Click to expand...
Click to collapse
where i can get custom kernel?
enkins said:
where i can get custom kernel?
Click to expand...
Click to collapse
You can't because there is no custom kernel.
ekin_strops said:
You can't because there is no custom kernel.
Click to expand...
Click to collapse
optimization for games in kernel adiutor is actually pretty straight forward. just choose performance governor for both cpu and gpu and lock both to the highest possible clocks (cpu minimum and maximum 2016 mhz, gpu min and max 650 mhz). that way they wont be downclocking to save power and ull have max performance always
furthermore, u could change IO scheduler to deadline for faster loading times and disable core control (as well as temperature and vdd control, depending on whether theyre active by default) in thermal tab. just keep an eye on device temperatures, cuz ull be basically removing throttling measures for hardware safety. although i doubt this should be a problem with an soc like SD625 in such a large device, but still...better be safe than sorry
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
jbmc83 said:
optimization for games in kernel adiutor is actually pretty straight forward. just choose performance governor for both cpu and gpu and lock both to the highest possible clocks (cpu minimum and maximum 2016 mhz, gpu min and max 650 mhz). that way they wont be downclocking to save power and ull have max performance always
furthermore, u could change IO scheduler to deadline for faster loading times and disable core control (as well as temperature and vdd control, depending on whether theyre active by default) in thermal tab. just keep an eye on device temperatures, cuz ull be basically removing throttling measures for hardware safety. although i doubt this should be a problem with an soc like SD625 in such a large device, but still...better be safe than sorry
Click to expand...
Click to collapse
great thanks to u for reply, i try this, hope it helps me
GPU settings not lock on 650 mhz, it's switch between 320 and 650, not 650 all time
enkins said:
GPU settings not lock on 650 mhz, it's switch between 320 and 650, not 650 all time
Click to expand...
Click to collapse
did you change the gpu governor to performance?
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
Hi, another way to unlock the cpu at its maximal frequence is to use the mod called " unlimited " in the playstore from the mi-globe rom (miui based)
here is the link : http://forum.mi-globe.com/general-development-f34/app-miui-unlimited-t691.html
You can activate it on the fly, very cool. I use this rom
Regards
jbmc83 said:
did you change the gpu governor to performance?
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
Click to expand...
Click to collapse
ofc i did, but still not work
ed57 said:
Hi, another way to unlock the cpu at its maximal frequence is to use the mod called " unlimited " in the playstore from the mi-globe rom (miui based)
here is the link : http://forum.mi-globe.com/general-development-f34/app-miui-unlimited-t691.html
You can activate it on the fly, very cool. I use this rom
Regards
Click to expand...
Click to collapse
it works only on miui rom, or it can works on custom roms?
enkins said:
ofc i did, but still not work
Click to expand...
Click to collapse
ok i just checked on my phone with LOS 14.1 installed. when u set min and max gpu frequency to 650 mhz and set perfomance profile the gpu will only downclock to 320 mhz if there is no load put onto it. if there is ANY load whatsoever (in my case a simple continuous finger swipe over the display) the gpu clock sticks to 650 mhz and stays there.
so no worries, uve unlocked ur SoC performance completely and ull get the most out of it during gaming
edit: btw, dont let the poll results fool you. most people just go with LOS because thats what they are accustomed to the most and because its been out the longest for mi max 2 as far as custom roms are concerned. so more people voting there doesnt mean its actually faster than other roms (likely that most people havent tried ALL roms, especially for gaming-specific purposes )
jbmc83 said:
ok i just checked on my phone with LOS 14.1 installed. when u set min and max gpu frequency to 650 mhz and set perfomance profile the gpu will only downclock to 320 mhz is there is no load put onto it. if there is ANY load whatsoever (in my case a simple continuous finger swipe over the display) the gpu clock sticks to 650 mhz and stays there.
so no worries, uve unlocked ur SoC performance completely and ull get the most out of it during gaming
edit: btw, dont let the poll results fool you. most people just go with LOS because thats what they are accustomed to the most and because its been out the longest for mi max 2 as far as custom roms are concerned. so more people voting there doesnt mean its actually faster than other roms (likely that most people havent tried ALL roms, especially for gaming-specific purposes )
Click to expand...
Click to collapse
ok thanks for that information, u help me so much, i''ll stay on DotOS 7.1.2 and test it for game perfomance, now results are fine, better then xiaomi.eu roms
Lineageos 14.1 is best
Best For Gaming
I believe that would be dot-os
Hi guys, Is there a possibility to create/port a Custom Kernel with oc cpu and gpu to the mi max 2 on lineage os 15.1 ?
Oc cpu to 2.4 gHz or 2.6 gHz depend of stability
Oc gpu to 800 mHz or 900 mHz depend of stability
f2fs,init.d compatibility
Thanks for your answers, and I think is a good idea to use this phone at his maximum capacity
Alyer said:
Hi guys, Is there a possibility to create/port a Custom Kernel with oc cpu and gpu to the mi max 2 on lineage os 15.1 ?
Oc cpu to 2.4 gHz or 2.6 gHz depend of stability
Oc gpu to 800 mHz or 900 mHz depend of stability
f2fs,init.d compatibility
Thanks for your answers, and I think is a good idea to use this phone at his maximum capacity
Click to expand...
Click to collapse
Of course, it's possible, but we need someone with enough will, time and experience to do this. I was already researching about all this, but at the moment, due to work, I don't have much time to invest in this.
ekin_strops said:
Of course, it's possible, but we need someone with enough will, time and experience to do this. I was already researching about all this, but at the moment, due to work, I don't have much time to invest in this.
Click to expand...
Click to collapse
no problem bro, tell me when you can begin the dev about a custom kernel
news about dev ?
Hello, as I mentioned I am facing low fps and poor performance in pubg and when I ran the geekbench test it games 1k in singlecore and 3k in multicore test. I am using stock oos oreo with blushark( I don't remember the name lol) kernal with unlocked bootloader. It also shows only 3 cores idk why, and the score is very low compared to other scores on browser.geekbench which shows 2k for single core and 5.5k for multicore. Please help!
I'll try to keep updating my research on this.
I did a hard reset and installed omni rom 8.1 which got me a 80% increase in single core benchmark (~1850) and 25% increase in multi core benchmark(~3925). Single core benchmarks are now around the same as of what others test results are showing in browser.geekbench, but multicore benchmark is still less. :/
Aah I settled on omni ROM 8.1 with caesium kernel and disabled touchboost and changed big cluster governer to ondemand from conservative. I now could play pubg smoothly on 1280x720p with high graphics and extreme fps thanks to gfx tool app before I couldn't even play the game with so smooth graphics and 956x500 blah blah resolution. I noticed the CPU would throttle down and reduce the frequencies for big cluster to like ~1530mhz and little to ~1350 MHz but the gameplay was good.
Assassin P780 said:
I'll try to keep updating my research on this.
I did a hard reset and installed omni rom 8.1 which got me a 80% increase in single core benchmark (~1850) and 25% increase in multi core benchmark(~3925). Single core benchmarks are now around the same as of what others test results are showing in browser.geekbench, but multicore benchmark is still less. :/
Click to expand...
Click to collapse
Stock kernel will give you the best results IMO. Try the Bane kernel, is good too
nickpapeir said:
Stock kernel will give you the best results IMO. Try the Bane kernel, is good too
Click to expand...
Click to collapse
Will try that too! Thanks!
The stock kernel gave me the above result 1850 singlecore and 3900 for multicore and after caesium kernel I got 4050 in multicore and 1650 in single core. But I don't how to go back to stock kernel without reinstalling the rom :/
Assassin P780 said:
... But I don't how to go back to stock kernel without reinstalling the rom :/
Click to expand...
Click to collapse
Use a file manager, such as Solid Explorer, to copy boot.img from the ROM zip file and flash it in TWRP by selecting Image in the install option.
Sent from my OnePlus 3T using XDA Labs
Thanks to BillGross
I am back on the stock kernel of omni rom 8.1 which gives me a average score of 1900 in single core and 3900 in multicore tests and pubg runs great on hdr 720p 60fps although it doesn't run at full 60 fps and there are some stutters here and there but gameplay is very good.
Simple fact: oos sucks except its face unlock.