Database Develop

Hard Brick L-19

Hello guys
Need your help or ideas
So i Hard Bricked my P9 i can only enter fastboot.
Phone was on Android N first build,flashed it with TWRP,but i dint have stock app likes camera calculator e.t.c
Phone was working OK but i whanted to get original camera.
So there was made TWRP for android N, i flashed it TWRP worked system was booting, but TWRP not mounting /data, so there was tuto for fix that.
Need to flash zip -> repair /data -> resize ( thats was begining of problem )
zip was success, but format and repair was with error 4
system not booting anymore stuck on bootloop, with twrp.
Tried re-flash N with TWRP dint helped . Only lost TWRP
So i flashed L19C432B136 with dload. update was success, but I don't know why system wast booting, there was no orginal recovery i can't enter it or update with dload.
Stuck in screen "Phone is unlocked and can't be trusted"
Flashing TWRP for MM or N is success but phone don't enter IT
Flashing stock recovery from B136 dint helped ( i tried stock recovery from B322 ; no success)
Tried flashing SYSTEM.img BOOT.img RECOVERY.img from 322, all is sucess but phone not skipping screen ( Phone is unlocked and can't be trusted )
Any idea how to get phone back from dead?
I can only enter fastboot.
Is i possible to flash something true fastboot?
I have full updates of L19C432B182 and L19C432B161.

richish said:
Hello guys
Need your help or ideas
So i Hard Bricked my P9 i can only enter fastboot.
Phone was on Android N first build,flashed it with TWRP,but i dint have stock app likes camera calculator e.t.c
Phone was working OK but i whanted to get original camera.
So there was made TWRP for android N, i flashed it TWRP worked system was booting, but TWRP not mounting /data, so there was tuto for fix that.
Need to flash zip -> repair /data -> resize ( thats was begining of problem )
zip was success, but format and repair was with error 4
system not booting anymore stuck on bootloop, with twrp.
Tried re-flash N with TWRP dint helped . Only lost TWRP
So i flashed L19C432B136 with dload. update was success, but I don't know why system wast booting, there was no orginal recovery i can't enter it or update with dload.
Stuck in screen "Phone is unlocked and can't be trusted"
Flashing TWRP for MM or N is success but phone don't enter IT
Flashing stock recovery from B136 dint helped ( i tried stock recovery from B322 ; no success)
Tried flashing SYSTEM.img BOOT.img RECOVERY.img from 322, all is sucess but phone not skipping screen ( Phone is unlocked and can't be trusted )
Any idea how to get phone back from dead?
I can only enter fastboot.
Is i possible to flash something true fastboot?
I have full updates of L19C432B182 and L19C432B161.
Click to expand...
Click to collapse
You have 2 choices with this.
If you can still boot into TWRP,
1. Flash the Beta Update.zip
2. Power off phone.
3. Press up button whilst powering up phone.
4. You will now be in stock recovery and you can perform a factory reset.
5. the device will now boot in to N beta but will be missing the vendor apps.
There is another way to fix if this doesn't work. Tell me if this method works first.
Edit: I just read in the op that you flashed the update and had stock recovery.
The reason it won't boot is because you need to have b322 flashed and you have to factory reset to repair the corrupt file system. To do this follow these instructions.
1. You need to flash the Boot, Recovery and System images from b322 in fastboot.
2. Then enter stock recovery (Vol + and Power)
3. Then factory reset (this is essential as it repairs the file system and enables boot)
4. The device will then boot.
5. (Optional )If you want to go back from the beta you have to flash the rollback.app to b300 through th dload method first then you can flash a Android 6.0 through the dload method.
Regards
Lee

thel2dab said:
You have 2 choices with this.
If you can still boot into TWRP,
1. Flash the Beta Update.zip
2. Power off phone.
3. Press up button whilst powering up phone.
4. You will now be in stock recovery and you can perform a factory reset.
5. the device will now boot in to N beta but will be missing the vendor apps.
There is another way to fix if this doesn't work. Tell me if this method works first.
Regards
Lee
Click to expand...
Click to collapse
Cant Enter TWRP
noone of recoverys work

richish said:
Cant Enter TWRP
noone of recoverys work
Click to expand...
Click to collapse
Edited my previous post with another method.

thel2dab said:
Edited my previous post with another method.
Click to expand...
Click to collapse
fast qestion
there is 2 recoverys, does both need to be flashed?

@richish
If you get really stuck I can teamviewer your pc and help.
Or you can facebook message me direct.
I had exactly the same issue when I first tried to flash the properdatafix with TWRP for N
Regards
---------- Post added at 10:26 PM ---------- Previous post was at 10:24 PM ----------
richish said:
fast qestion
there is 2 recoverys, does both need to be flashed?
Click to expand...
Click to collapse
You can flash both.
fastboot flash recovery recovery.img
fastboot flash recovery2 recovery2.img
I don't think it is essential but it won't hurt to do it anyway.
---------- Post added at 10:35 PM ---------- Previous post was at 10:26 PM ----------
[/COLOR @richish
I seen you PM. I am not sure it will wok by flashing B182. I think you have to flash B322 first.
Regards

fist you have to flash stock recovery from emui 5(android N) through fastboot.
second , download the rollback package,extract it and put it on dload folder of external storage.
third, turn off the phone , and press vol up + vol down + power button together to enter forced update mode.
if it is successful system will boot and you should flash android M firmware using dload method then u should unlock bootloader,install twrp,wipe /system /cache /data and then flash update.zip(android N) and hw_data of your firmware one after another.
i hope this help you.

still phone is not booting
I redownload b322, extracted Boot.img System.img Recovery.img Recovery2.img and Cust.img with
http://forum.xda-developers.com/showthread.php?t=2433454 Update Extractor
Flashed all .img true fastboot
But still nothing
Stuck on bootloader screen "Your device is unlocked, and can't be trusted"
Maybe i need flash some more images from b322.
Its look like phone cant pass bootloader.
Any sugestions?
P.S. Phone still have warranty, but booloader is unlocked
and fastboot oem relock ************** ends with failed.
"Failed - root cant trusted"
Sugestions how to lock it?

I had my phone bricked from testing cm, and going back to stock. My solution was to flash dload and recovery from the 182, followed by dload flash of 182.

@richish
caution : these commands will format the partition
can u use these command ?
"fastboot format /system"
"fastboot format /data"
or "fastboot erase /system"=> this will erase system partition

Phone is live now.
I downloaded DC-Phoenix and bought 15 credits
flashed stock B182 via DC-phoenix and phone booted.
I recomand this apllication for everybody who have similar problems.
THX for everybody who helpped.

richish said:
Phone is live now.
I downloaded DC-Phoenix and bought 15 credits
flashed stock B182 via DC-phoenix and phone booted.
I recomand this apllication for everybody who have similar problems.
THX for everybody who helpped.
Click to expand...
Click to collapse
How can i sign up for an account, it alway said wrong username or password !:crying:

DC-Phoenix is not cheap but it also cured my phone after bricking it with flashfire where all other methods did not work.
if you use it follow the instructions carefully and do the 2 step flashing although it will work after the first one. if you don`t do the second flash the partition sizes are wrong and a dload update will fail.

smartmobee said:
How can i sign up for an account, it alway said wrong username or password !:crying:
Click to expand...
Click to collapse
First u must buy credits, activate your account in email and then login in aplication.

Hi everyone
I would like to share the problem that i am having with my p9 , so maybe i can get your help.
Firstly i had L19C185 version and i changed Oeminfo in order to install c636 Beta 7.0 Nougat.
I installed the nougat but then realized that i dont have stock apps in my phone, so by mistakely tried to install TWRP for 6.0 Marshmallow and my problem started here.
Now my phone can not boot. its stuck in Phone is booting now ( the screen when you unlock bootloader after huawei logo) , and its never booting. it stays like that.
I tried to flash rboot.img , recovery.img and System.Img from fast boot. but whenever im trying to flash system.img after boot and recovery.img, a get an error and never succeeded to flash system.img. Im trying to flash these .img files from L19C636b180.
Can you please help me or give me some advice because none of mobile services couldnt fix and flash new software. maybe because they dont know exactly what should they do. and in my country i couldnt find anyofficial huawei service provider.
Please help me how to fix my phone.

I also had serious problems with flashing the thing back to stock.
TWRP was broken too for me.
I've done that to fix it all
The ONLY way that worked for me was
1. Download EVA-L19C636B168 from here http://forum.xda-developers.com/p9/development/rom-stock-rom-eva-l19c636b168-t3419586
2. Download that SRK tool http://forum.xda-developers.com/p9/development/tool-srk-tool-huawei-bootloader-root-t3374068
3. Flash the recovery from the SRK tool, you can do that with the tool or directly via fastboot (i don't know other proper source for the correct recovery img)
4. Put the image EVA-L19C636B168 (UPDATE.app) in the "dload" folder of your sd card
5. Start phone in dload mode (Hold all 3 buttons at start) and let the update do it's job

What about recovery??? Does 3 button combination works? Whats heppens if u hold volup and power button when turning phone on!
Situation looks similar what i had.
Only solution for me was dc-phoenix.
U have tu buy 15 points to flash phone (15eur) But it works.
I'm 99% sure that there are bootloader comands what is same as for dc-phoenix,but i dont know them.
Sent from my EVA-L19 using XDA-Developers mobile app

please help
i had bricked my p9 L09 twrp not working noting working only fastboot mode is working plzzz help me in finding boot.img recovery.img system.img

Forced recovery stuck at 5%

Hey all. I was trying to rollback my P9 to a stock ROM, but it failed and now I am stuck with a bricked P9 (bootloop).
My phone is a European P9 (EVA-L09C432). I have an unlocked bootloader.
- Huawei eRecovery and HiSuite restore does not work.
- I've tried forcing the update using the SRK Tool brick utility, but receive the message "FAILED (remote: sparse flash write failure)" when it's strats writing 'system'.
- My TWRP backup does not work, I had a 7GB backup that installs fine, but the phone is still stuck in a bootloop.
- I can flash EVA-L09C432B378 ROM using the SRK brick utility fine, but the phone is still stuck in a bootloop.
- After I have installed B378 and try to force flash B136 using the dload method, it either gets stuck on the "going into restore mode" or it goes to the "installing package" screen, where it is stuck at 5% until it reboots.
Any suggestions?

try one more time install rollback package by download mode

I've tried. Several times, all day :crying: My process:
Write TWRP from fastboot so I can boot into TWRP and transer UPDATE.app to the dload folder
Reboot into fastboot
Write stock recovery image from fastboot
Boot into recovery mode
Get stuck at 5% on the "Installing update" screen.
I've tried the UPDATE.app or firmware B136 (stock), and UPDATE.app for B378 (Nougat)
Both get stuck at 5%.
I'm stuck at the bootloop

isn't srk tool only for MM?
maybe try extract recovery , boot and system partition from b378 and flash by fastboot , next start flash rollback package by download mode

I noticed when I tried to restore my backup using TWRP it failed at "vendor" (Failed to wipe vendor). I receive this issue at vendor and product.
I tried using fastboot to flash vendor and product manually, I receive these error messages:
"failed: remote command not allowed"
The phone won't allow me to write vendor and product.img... but my bootloader was unlocked?
Is it possible I could have relocked my bootloader? How am I supposed to get the bootloader code for my P9 again :/ It's nearly impossible.

I managed to use the recovery dload method to install a beta version of B378 (build number NRD90M test-keys). Will now try to use the recovery method to roll back to B136 and update back to B378 again.

Highfall said:
I managed to use the recovery dload method to install a beta version of B378 (build number NRD90M test-keys). Will now try to use the recovery method to roll back to B136 and update back to B378 again.
Click to expand...
Click to collapse
I'm having similar issues. Have you solved your problem? What have you tried so far?

Same problem here! Did you resolve?
Thanks you.

Try unplug charger or usb cable then do it

WTF, that ist the solution to the whole damn problem! Just unplugging the damn usb cable and it installs the update just fine. ive spend 2 whole days on this, almost giving it up beacuse everytime it got stuck at 5% and then this...
seriously thank you!

JimmyEatFood said:
Try unplug charger or usb cable then do it
Click to expand...
Click to collapse
thx i managed to boot my device, but i relocked bootloader and factory reset doesnt work correctly it deleted 3rd party apps and leaved few system apps and blotware. what should i do.
and really thanks, you saved me.

Removing cabled worked for me also

[HELP] Full brick?

Hi guys, ITALY HERE, I rarely write on the forum, but this time I have a serious problem ... I tried everything ...
I had this phone with firmware PRA-LX1C432B101 root and recovery TWRP, now in the attempt to bring it to stock to sell it I had a HARD BRICK,
I flashed through adb a wrong firmware and now I can not even access via adb ...."adb devices" shows an empty List, i think fasboot is broken too ..
. DLOAD seems not working, all files i try stops after 5% "update failed" and of course erecovery download not working and hisuite totally useless ...
Damn, .. what can i do ??? Why fastboot does not work?
ty guys, have a nice day...

Hey man have you tried to change the cable,restart the pc and the phone?If after that works go in adb and flash the correct firmware using adb flash recovery recovery.img
adb flash system system.img and the same with boot.img

Yeah. Tried. No device recognized... and i cant find my original firmware 101 on internet...

Install any firmware for you Pra-Lx1 and then go to recovery and factory reset

Khaver89 said:
Yeah. Tried. No device recognized... and i cant find my original firmware 101 on internet...
Click to expand...
Click to collapse
When you say fastboot does not work, are you trying to use it on the bootloader ?
edit:
I thought I had bricked my device too when I wiped it and failed to install a ROM (which actually wasn't adequate), but I only had to download the correct ROM with firmware finder, then I extracted the .img files from the update.app file with Huawei update extractor. Then I went to bootloader, flashed recovery.img, boot.img and system.img.
Finally I rebooted into eRecovery and made a factory restore to get it to work again.

Formatted system need help

So I stupidly formatted the system when I was trying to upgrade from b383 to b388 iv tried everything to get it to work again. I extracted the system.img and tried to fastboot it but it fails iv tried huawei dload method but all I get is a red !. I relocked boot loader also to see if that will help with dload method. So if anyone can help I'd much appreciate it.

Problem with stock rom

Hallo all,
i´ve got some problems with my huawei p9. I have flashed the newest TWRP Custom Recovery (3.1.1.-0) to both recovery partitions (recovery and recovery2), and an open Bootloader.
Now i have tried to install the newest firmware for my Phone (EVA-L09C4321B398). There are 3 Files:
-update.zip
-update_data_full_public.zip
-update_full_EVA-L09_hw_eu
in every guid is written that i have to install the update.zip first. I have tried this and get an error:
https://picload.org/view/daowaddl/screenshot_2018-03-10-08-44-14.png.html
so the update cant be installed.
The next thing i have tried is to install it via "dload" folder. At first i have flashed back the STOCK recovery to recovery. (recovery2 is still TWRP). Then i have copied the UPDATE.APP to the "dload" folder on my SD Card.
Now i have booted in the stock recovery (Vol + and Vol- Pressed) now it starts the update but has also an error:
https://picload.org/view/daowaagw/2m7sv4i.jpg.html
In this case i have tried to download another packet of firmware and another and so on.... every time the same s***.
for every step i have whiped and formated the partitions.
now i´m unable to boot in the system because i cant install a stock firmware. if i try to boot normal the device stocks on boot screen. And i have made no backup of the partitions befor i have tried to istall the firmware.
Here are the Datas of the Phone:
-Device: Huawei P9
-Model: EVA-L09
-Firmware before flash: EVA-L09C432B397
-EMUI_ 5.0.1
-Android version: 7.0
Anyone an idea?

assassin198911 said:
Hallo all,
i´ve got some problems with my huawei p9. I have flashed the newest TWRP Custom Recovery (3.1.1.-0) to both recovery partitions (recovery and recovery2), and an open Bootloader.
Now i have tried to install the newest firmware for my Phone (EVA-L09C4321B398). There are 3 Files:
-update.zip
-update_data_full_public.zip
-update_full_EVA-L09_hw_eu
in every guid is written that i have to install the update.zip first. I have tried this and get an error:
https://picload.org/view/daowaddl/screenshot_2018-03-10-08-44-14.png.html
so the update cant be installed.
The next thing i have tried is to install it via "dload" folder. At first i have flashed back the STOCK recovery to recovery. (recovery2 is still TWRP). Then i have copied the UPDATE.APP to the "dload" folder on my SD Card.
Now i have booted in the stock recovery (Vol + and Vol- Pressed) now it starts the update but has also an error:
https://picload.org/view/daowaagw/2m7sv4i.jpg.html
In this case i have tried to download another packet of firmware and another and so on.... every time the same s***.
for every step i have whiped and formated the partitions.
now i´m unable to boot in the system because i cant install a stock firmware. if i try to boot normal the device stocks on boot screen. And i have made no backup of the partitions befor i have tried to istall the firmware.
Here are the Datas of the Phone:
-Device: Huawei P9
-Model: EVA-L09
-Firmware before flash: EVA-L09C432B397
-EMUI_ 5.0.1
-Android version: 7.0
Anyone an idea?
Click to expand...
Click to collapse
Hi! You might want to try doing what I did when I was trying to update my phone to the latest version. https://forum.xda-developers.com/showpost.php?p=75788148&postcount=13 (For the HWOTA procedure that I was referring to, here's the thread link: https://forum.xda-developers.com/p9/development/eva-nocheck-recovery-flash-unapproved-t3705125).
I can attest to it that it was a clean install. I was able to install updates as well through System Update (I didn't reinstall TWRP after).

assassin198911 said:
Hallo all,
i´ve got some problems with my huawei p9. I have flashed the newest TWRP Custom Recovery (3.1.1.-0) to both recovery partitions (recovery and recovery2), and an open Bootloader.
Now i have tried to install the newest firmware for my Phone (EVA-L09C4321B398). There are 3 Files:
-update.zip
-update_data_full_public.zip
-update_full_EVA-L09_hw_eu
in every guid is written that i have to install the update.zip first. I have tried this and get an error:
https://picload.org/view/daowaddl/screenshot_2018-03-10-08-44-14.png.html
so the update cant be installed.
The next thing i have tried is to install it via "dload" folder. At first i have flashed back the STOCK recovery to recovery. (recovery2 is still TWRP). Then i have copied the UPDATE.APP to the "dload" folder on my SD Card.
Now i have booted in the stock recovery (Vol + and Vol- Pressed) now it starts the update but has also an error:
https://picload.org/view/daowaagw/2m7sv4i.jpg.html
In this case i have tried to download another packet of firmware and another and so on.... every time the same s***.
for every step i have whiped and formated the partitions.
now i´m unable to boot in the system because i cant install a stock firmware. if i try to boot normal the device stocks on boot screen. And i have made no backup of the partitions befor i have tried to istall the firmware.
Here are the Datas of the Phone:
-Device: Huawei P9
-Model: EVA-L09
-Firmware before flash: EVA-L09C432B397
-EMUI_ 5.0.1
-Android version: 7.0
Anyone an idea?
Click to expand...
Click to collapse
Old guides, your method worked for FullOTA-MF-PV builds, but new Huawei builds are no more PV. So wait for OTA, flash HWOTA.zip or use no-check recovery method

I call Huawei Hotline for this issue before. My phone is P9 plus, they told me so far they dont have any system update information about model which is below P10 series version yet. They just ask me waiting for system push message.