I need the firmware 7.1.1 of the Moto E4 Plus xt1770 with Scatter file, So i can flash and unbrick my phone...Help Guyz.
Did you have backup of your device nvram ?
How you format your device ?
which tool ? method ?
At this time factory images are not available for any variant of Moto E4.
we need more explanation.
kartik verma said:
Did you have backup of your device nvram ?
How you format your device ?
which tool ? method ?
At this time factory images are not available for any variant of Moto E4.
we need more explanation.
Click to expand...
Click to collapse
I used SP flash tool (format whole flash button). now the phone is hard bricked. not taking charge, didn't power on and it's like a dead phone. For unbricking, the stock rom is needed.
Kris Ibrahimovic said:
I used SP flash tool (format whole flash button). now the phone is hard bricked. not taking charge, didn't power on and it's like a dead phone. For unbricking, the stock rom is needed.
Click to expand...
Click to collapse
Few things your device doesn't have after formatting whole flash.
no preloader in bootloader partition.
no partition table exist in this state.
no nvram/nvdata means no IMEI, no working network, no working wifi etc etc.
one more question !
is it detected by pc or not ?
my view on stock rom requirement is pretty useless. The reason behind this, if someone give you the whole firmware package (it is possible to extract the whole firmware) but they won't give you their device nvram data. After recovering, it has no radio signal merely a music player and nothing else.
It is better to sent your device to the service center.
I also unable to restore firmware through Sp flash tool. The whole firmware dumped with miracle tool and only miracle tool flashable but it gives some strange error "Error 1: no 5A" after this error firmware installation stopped. Another way i found is to flash whole firmware through fastboot tool. Your device must have bootloader in bootloader partition and partition table along with this nvram data required too.
Hope this helps !
kartik verma said:
Few things your device doesn't have after formatting whole flash.
no preloader in bootloader partition.
no partition table exist in this state.
no nvram/nvdata means no IMEI, no working network, no working wifi etc etc.
one more question !
is it detected by pc or not ?
my view on stock rom requirement is pretty useless. The reason behind this, if someone give you the whole firmware package (it is possible to extract the whole firmware) but they won't give you their device nvram data. After recovering, it has no radio signal merely a music player and nothing else.
It is better to sent your device to the service center.
I also unable to restore firmware through Sp flash tool. The whole firmware dumped with miracle tool and only miracle tool flashable but it gives some strange error "Error 1: no 5A" after this error firmware installation stopped. Another way i found is to flash whole firmware through fastboot tool. Your device must have bootloader in bootloader partition and partition table along with this nvram data required too.
Hope this helps !
Click to expand...
Click to collapse
It was not detected on PC..but it detects on SP fash tool bcoz of mediatek drivers..if I clicked flash button and connect the phone, SP flash tool detects...is there any other way to recover my hard bricked phone?
Kris Ibrahimovic said:
It was not detected on PC..but it detects on SP fash tool bcoz of mediatek drivers..if I clicked flash button and connect the phone, SP flash tool detects...is there any other way to recover my hard bricked phone?
Click to expand...
Click to collapse
Yes, it is possible to recover with miracle tool not the sp flash tool. but we need someone who can upload the whole firmware which is of about 2 GB. LOL
kartik verma said:
Yes, it is possible to recover with miracle tool not the sp flash tool. but we need someone who can upload the whole firmware which is of about 2 GB. LOL
Click to expand...
Click to collapse
upload that soon...LOL
Kris Ibrahimovic said:
upload that soon...LOL
Click to expand...
Click to collapse
I have Moto E4 XT1760.
kartik verma said:
I have Moto E4 XT1760.
Click to expand...
Click to collapse
hmm no problem..I wait for xt1773
I fixed it... everything works fine... but Sim cards not detected...gimme a fix dudes
i have the same problem motorola e4 xt1764 please upload the stock rom at&t
---------- Post added at 05:11 PM ---------- Previous post was at 05:08 PM ----------
Kris Ibrahimovic said:
I fixed it... everything works fine... but Sim cards not detected...gimme a fix dudes
Click to expand...
Click to collapse
How did you fix it?
please i need to unbrick my moto e4 xt1764
---------- Post added at 05:16 PM ---------- Previous post was at 05:11 PM ----------
Kris Ibrahimovic said:
I fixed it... everything works fine... but Sim cards not detected...gimme a fix dudes
Click to expand...
Click to collapse
How did you fix it? please
---------- Post added at 05:20 PM ---------- Previous post was at 05:16 PM ----------
kartik verma said:
Few things your device doesn't have after formatting whole flash.
no preloader in bootloader partition.
no partition table exist in this state.
no nvram/nvdata means no IMEI, no working network, no working wifi etc etc.
one more question !
is it detected by pc or not ?
my view on stock rom requirement is pretty useless. The reason behind this, if someone give you the whole firmware package (it is possible to extract the whole firmware) but they won't give you their device nvram data. After recovering, it has no radio signal merely a music player and nothing else.
It is better to sent your device to the service center.
I also unable to restore firmware through Sp flash tool. The whole firmware dumped with miracle tool and only miracle tool flashable but it gives some strange error "Error 1: no 5A" after this error firmware installation stopped. Another way i found is to flash whole firmware through fastboot tool. Your device must have bootloader in bootloader partition and partition table along with this nvram data required too.
Hope this helps !
Click to expand...
Click to collapse
i have the error1: no 5A what can i do?
I found the stock ROM for Moto E4 Plus ( XT1770 ). Indian Variant. I flashed it. It's working perfectly.
Kris Ibrahimovic said:
I fixed it... everything works fine... but Sim cards not detected...gimme a fix dudes
Click to expand...
Click to collapse
How do you restore stock Firmware ??? Can u plz explain ?
Can someone please upload nvram backup file?
I have xt1771 with corrupted nvram and I dont have the backup.
Related
Please Help me
My Huawei Honor 4x
was locked and stay in fastboot and rescue mode
please, how to fix it ?:crying:
I got the same problem but in the screen shows (unlocked)
Still I can't flash anything.. seniors help
well depends, are you on che2-xx or che1? because i know only about che2, and anyways, what error says in the rescue mode?
Fastboot & Rescue Mode
Thadab said:
I got the same problem but in the screen shows (unlocked)
Still I can't flash anything.. seniors help
Click to expand...
Click to collapse
exactly like my Device! in Fastboot Mode shows Phone Unlocked! even i checked the unlocking bootloader by CMD,that shows Unlocked too.But I cant Flash any Recovery on My Honor 4x Che-tl00H.its necessary to say,I never Unlocked My Bootloader.But every Methods are saying,its Unlocked,even DC-unlocker.Guy's,Whats the problem?I Really need a Costume Recovery.because of a Bigger issue...
solution
download official rom and put update.APP to dload folder on SD card.
than turn off phone and press all three buttons together Volume + and - and power.
It will install fresh os on your phone
Amin Benzema said:
exactly like my Device! in Fastboot Mode shows Phone Unlocked! even i checked the unlocking bootloader by CMD,that shows Unlocked too.But I cant Flash any Recovery on My Honor 4x Che-tl00H.its necessary to say,I never Unlocked My Bootloader.But every Methods are saying,its Unlocked,even DC-unlocker.Guy's,Whats the problem?I Really need a Costume Recovery.because of a Bigger issue...
Click to expand...
Click to collapse
It's a known issue with some device models. The device reports it's unlocked but in reality it isn't. Perform the normal unlock steps to unlock your boot loader despite it reports it unlocked.
hackslash said:
It's a known issue with some device models. The device reports it's unlocked but in reality it isn't. Perform the normal unlock steps to unlock your boot loader despite it reports it unlocked.
Click to expand...
Click to collapse
Help!!!!!
i tried a wrong Way to Change My ROM.my Device is Che-TL00H But i flashed a Che2-L11 Rom on my device with CMD.i flashed everything that was flashable with CMD.important to say,more than 90% of files have been flashed.(just 2 or 3 file couldn't flash).
the worst issue is: i flashed fastboot.img & fastboot1.img successfully.and now i have not any thing to turnback my old rom.
simply,i have No fastboot & Rescue mode!!!!
whats the solution??!!
plz help!
Amin Benzema said:
Help!!!!!
i tried a wrong Way to Change My ROM.my Device is Che-TL00H But i flashed a Che2-L11 Rom on my device with CMD.i flashed everything that was flashable with CMD.important to say,more than 90% of files have been flashed.(just 2 or 3 file couldn't flash).
the worst issue is: i flashed fastboot.img & fastboot1.img successfully.and now i have not any thing to turnback my old rom.
simply,i have No fastboot & Rescue mode!!!!
whats the solution??!!
plz help!
Click to expand...
Click to collapse
So you can't even start your device i.e. it doesn't even reaches the pre-boot screen (the Honor logo). You should have never ever flashed fastboot image. If your device reaches Honor logo, then bootloader is fine and fastboot should work but if that isn't the case, you have screwed it up big time. Still do reply back, we'll see what we can do
hackslash said:
So you can't even start your device i.e. it doesn't even reaches the pre-boot screen (the Honor logo). You should have never ever flashed fastboot image. If your device reaches Honor logo, then bootloader is fine and fastboot should work but if that isn't the case, you have screwed it up big time. Still do reply back, we'll see what we can do
Click to expand...
Click to collapse
oh,please help me!!! my device is hard bricked! i think it needs a jtag Box for solve the problem.can i solve it manually? have i a way to fix my device?
what is this unknown driver ㌲㔴㜶㤸 when i plug my device to my PC?
this is the only clue to being alive of my device!
Amin Benzema said:
oh,please help me!!! my device is hard bricked! i think it needs a jtag Box for solve the problem.can i solve it manually? have i a way to fix my device?
what is this unknown driver ㌲㔴㜶㤸 when i plug my device to my PC?
this is the only clue to being alive of my device!
Click to expand...
Click to collapse
jtag Box needs to be coupled with Bootloader flashing tool and the necessary bootloader files. Since none of them are available, you are in a pretty hard spot.
just blinking red light once and green light twice! still alive
hackslash said:
jtag Box needs to be coupled with Bootloader flashing tool and the necessary bootloader files. Since none of them are available, you are in a pretty hard spot.
Click to expand...
Click to collapse
i have exactly the same problem on my che-tl00h
ive got taken it to huawei repair center. so they told me that they dont have jtag dump file for that model (che-tl00h) to repair my boot
have anyone got the dump file for this model?
farzadmaverick said:
i have exactly the same problem on my che-tl00h
ive got taken it to huawei repair center. so they told me that they dont have jtag dump file for that model (che-tl00h) to repair my boot
have anyone got the dump file for this model?
Click to expand...
Click to collapse
No my bro.it's Dead.you should change your mobile mother board with another honor 4x(it's expensive) or you should find a programed EMMC that exactly is for che-tl00h(almost hard to find for this model) or sell your hard bricked phone(best way like my way). Of course you can find your dump files and give them to a technician for flashing on a unprogramed EMMC,but I know you can not find dump files for this model easily.
This is a real experience for focusing on model of the phone that we purchase for next shopping.
We should just buy a Global released model,not a china model.
Persian:dadash manam az alaedin raft tu pacham,vali azin be baad faqat ye bakhshe tahghigham check kardane behtarin o bi dardesar tarin modele un dasgahie k madde nazarame.ke dg eshtebahi nakharam.
Che2-L11 ham modele khubie az honor 4x.
thank you. I already gave up and buy another phone
That's sad
U could have much before giving up , u still own it ?
gopinaidu77 said:
U could have much before giving up , u still own it ?
Click to expand...
Click to collapse
Whats the solution??!
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
Amin Benzema said:
Whats the solution??!
Click to expand...
Click to collapse
We should find dump file for repair the boot.but never can find these dumps.It's only solution to repair it i think!
Amin Benzema said:
Whats the solution??!
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
We should find dump file for repair the boot.but never can find these dumps.It's only solution to repair it i think!
Click to expand...
Click to collapse
No u can still fix it buddy. I can help u
gopinaidu77 said:
No u can still fix it buddy. I can help u
Click to expand...
Click to collapse
Great for morality!but I sold it 4 months ago.
But I suggest you if it have a step by step solution,and if it's almost simple,write it for another guys.
Of course I want to know too that what's the solution.
That will be helpful
Amin Benzema said:
Great for morality!but I sold it 4 months ago.
But I suggest you if it have a step by step solution,and if it's almost simple,write it for another guys.
Of course I want to know too that what's the solution.
Click to expand...
Click to collapse
So before that , i need some info to make final solution
Friends I posted a help a month ago....I wanted a stock rom to unbrick my hard bricked Moto E4 plus..I got it in Needrom.com at yesterday and flashed it with SP flash tool as my phone is MTK variant..I did it successfully and it works perfectly. Everything works superb....even the fingerprint sensor. But the only problem is It does NOT DETECTING both of my Sim cards..it detects SD card perfectly...So kindly request u guys to give me a solution... Thanks in Advance
Kris Ibrahimovic said:
Friends I posted a help a month ago....I wanted a stock rom to unbrick my hard bricked Moto E4 plus..I got it in Needrom.com at yesterday and flashed it with SP flash tool as my phone is MTK variant..I did it successfully and it works perfectly. Everything works superb....even the fingerprint sensor. But the only problem is It does NOT DETECTING both of my Sim cards..it detects SD card perfectly...So kindly request u guys to give me a solution... Thanks in Advance
Click to expand...
Click to collapse
*CONGRATULATION*
you have successfully screwed your device nvram data
without nvram "no imei , no wifi, no radio signal, no sim working, no bluetooth" nothing else.....
just a music player
check whether IMEI is listed or not.
*#06#
only sim card is not detecting..other things are working fine..no imei
Kris Ibrahimovic said:
only sim card is not detecting..other things are working fine..no imei
Click to expand...
Click to collapse
wait wait
*corrupted nvram*
---------- Post added at 01:09 PM ---------- Previous post was at 01:08 PM ----------
Kris Ibrahimovic said:
only sim card is not detecting..other things are working fine..no imei
Click to expand...
Click to collapse
post screenshot here after typing *#06#
it says no cellular network
Kris Ibrahimovic said:
only sim card is not detecting..other things are working fine..no imei
Click to expand...
Click to collapse
if only imei not working and other things working well like wifi, bluetooth etc. then you need to add your device imei number with the help of imei injector tool
---------- Post added at 01:13 PM ---------- Previous post was at 01:12 PM ----------
Kris Ibrahimovic said:
it says no cellular network
Click to expand...
Click to collapse
*inject imei number*
wifi, Bluetooth working awesome....how to inject Imei. gimme some ways dude
Kris Ibrahimovic said:
wifi, Bluetooth working awesome....how to inject Imei. gimme some ways dude
Click to expand...
Click to collapse
search with these keyword
" how to fix/restore lost imei in mediatek phones "
mtkandroid.com
very tough bro...I need to fix that.... in MTK Engineering mode, CDS services menu not showing in connectivity tab. still now way for twrp and root for Moto E4 plus....holy crap. Someone give me a guide..dear senior members
Kris Ibrahimovic said:
very tough bro...I need to fix that.... in MTK Engineering mode, CDS services menu not showing in connectivity tab. still now way for twrp and root for Moto E4 plus....holy crap. Someone give me a guide..dear senior members
Click to expand...
Click to collapse
Twrp available for both qualcomma and mediatek variant of moto e4 plus
Tell me the SKU version ?
Indian variant...MTK6737M.....xt 1771...the twrp links are broken..pls update..
Where to find the SKU version?
CDS information not showing in MTK engineering mode. Here are some screenshots of my problem (not the last pic)??
Kris Ibrahimovic said:
Indian variant...MTK6737M.....xt 1771...the twrp links are broken..pls update..
Click to expand...
Click to collapse
go through with this link
https://forum.xda-developers.com/showpost.php?p=73878110&postcount=19
root your device with magisk v14.0 or phh's superuser.
Hope this helps
---------- Post added at 02:46 PM ---------- Previous post was at 02:44 PM ----------
Kris Ibrahimovic said:
CDS information not showing in MTK engineering mode. Here are some screenshots of my problem (not the last pic)
Click to expand...
Click to collapse
Their's no CDS menu for moto e4 & plus variant
I installed twrp...now my phone stuck on bootscreen...holy ****
Kris Ibrahimovic said:
I installed twrp...now my phone stuck on bootscreen...holy ****
Click to expand...
Click to collapse
LOL
didn't you hear about dm-verity
flash no-verity zip file in order to boot in system.
or disable this feature manually.
unpack boot image.
within ramdisk folder search for this file recovery.fstab
in /system remove ",verity" it looks like this " MOUNT FLAG /system wait,verify"
remove " ,verify "
save < repack < install with fastboot.
I need to flash that file..pls provide a link
I flashed again and installed twrp and now I'm able to boot inside....the phh superuser zip link I not working...give me a link..pls
I rooted successfully...thanks mate...
Kris Ibrahimovic said:
I rooted successfully...thanks mate...
Click to expand...
Click to collapse
No need to say thanks
press this button :good:
I have tried mtk droid tools , SN write tool , chamelphon , but i still cant restore my imei . Any other solutions ? Guys ? Some have said flashing the stock firmware using spflashtool . But , I have also tried , not working at all . Any other method ?
delsoo said:
I have tried mtk droid tools , SN write tool , chamelphon , but i still cant restore my imei . Any other solutions ? Guys ? Some have said flashing the stock firmware using spflashtool . But , I have also tried , not working at all . Any other method ?
Click to expand...
Click to collapse
How did you lost imei?
Costa001 said:
How did you lost imei?
Click to expand...
Click to collapse
i think by during flashing time , i click format all + download , then when i flash custom rom , i wipe all including data , system and internal storage..
Do you have any solution ?
delsoo said:
i think by during flashing time , i click format all + download , then when i flash custom rom , i wipe all including data , system and internal storage..
Do you have any solution ?
Click to expand...
Click to collapse
Imei can't be lost by formatting data, system and internal. It lost by rom that you flashed.
Which rom that was?
Use ToolHero (https://play.google.com/store/apps/details?id=com.mobileuncle.toolhero.lite&hl=en).
i have got the same problem recently then i flashed stock rom with SP TOOL and then again re insalled twrp then my custom rom this will resolve the imei lost issue
lplovepreet said:
i have got the same problem recently then i flashed stock rom with SP TOOL and then again re insalled twrp then my custom rom this will resolve the imei lost issue
Click to expand...
Click to collapse
Let me know which procedure you use to flash imei
---------- Post added at 08:43 AM ---------- Previous post was at 08:38 AM ----------
delsoo said:
I have tried mtk droid tools , SN write tool , chamelphon , but i still cant restore my imei . Any other solutions ? Guys ? Some have said flashing the stock firmware using spflashtool . But , I have also tried , not working at all . Any other method ?
Click to expand...
Click to collapse
I have solution but til you're problem solve or not
Don't worry I have an 1000% solution by researching whole continues 10 hours a day ..
pinaki000007 said:
Let me know which procedure you use to flash imei
---------- Post added at 08:43 AM ---------- Previous post was at 08:38 AM ----------
I have solution but til you're problem solve or not
Don't worry I have an 1000% solution by researching whole continues 10 hours a day ..
Click to expand...
Click to collapse
what's the solution ?
just flash the stock ROM , You'll be forgiven
Use chamelophone
simple step to recover imei
Just follow the steps ( sim card must be inserted). I had the same problem and searched solution more 24hrs, no chamelephone solution worked , mtk tools etc etc none!!
And at last I saw a Chinese forum (now I don't have the link extremely sorry need to search)
To resolve this
1. You should root your device only stock ROM(fresh) not custom ROM
2. Use zarchiver or any root file browser (I used zarchiver)
3. Now go to root(system directory) set permission to rw from ro. Means (read n write,read only)
4. Goto system (root/system directory),then data, then nvram
5. That's all just delete the nvram folder (don't worry nothing happened to when I deleted )
6. Reboot then don't touch your device until network signal comes
I too felt that It would be a bad solution or he was kidding.
BUT IT WORKED
I can't give full guarantee to work but try dude, if I didn't tried I would trashed my mobile. Thank you
How to Restore a Bricked x620-x626
with all the necessary tools + VIDEO GUIDE
Red state after invalid commands entered in the fastboot mode, after installing Twrp, etc..
The first time I broke the phone after I entered the wrong commands after installing twrp. long tormented to restore. It was necessary to use roms x620, first of all, but after installing this firmware, the screen could be viewed through the mirror.
*after such torment, I thinked, and what prevents me from making (assembling), firmware on version 28, and also without dancing .. screen 180 and mirror..
I used a firmware (stock ROM) s28 for Flashtool for all versions of x620-x626 without upside-down screen, etc.
The archive contains: Video instruction (Russian, English), drivers, firmware, installer TWRP 3.1.1, Super SU, disabling Orange State. A complete set.
1. Section Userdata I did not touch, because probably you need your files (without its firmware)
2. This method (firmware for recovery) is tested on the devices: > 10-x626, 1-x622 with success.
3. Used Stock ROM S28
4. Imei, Nvram will remain untouched!!!
_____________________________________________
Google drive
http://drive.google.com/open?id=1kOAYXA-8SVg8Zx0-OaTLwk0cREHqPG1j
_____________________________________________
Yandex
http://yadi.sk/d/wqqZN_ti3SjqKM
_____________________________________________
If you can’t restore the phone, use the firmware from this post.
Problematic are x620 and x625.
https://forum.xda-developers.com/showpost.php?p=82402861&postcount=66
Repair IMEI
https://forum.xda-developers.com/showpost.php?p=82446181&postcount=68
Brick Restoration | Flashtool | S28 | x620-x626
author: Kychera22
How to Restore a Bricked x620-x626
with all the necessary tools + VIDEO GUIDE
--------------------------------------------------------------
Google Drive
https://drive.google.com/file/d/1kOAYXA-8SVg8Zx0-OaTLwk0cREHqPG1j/view
--------------------------------------------------------------
Yandex
https://yadi.sk/d/wqqZN_ti3SjqKM
--------------------------------------------------------------
Thanks for the help!!!: D
Kychera22 said:
Thanks for the help!!!: D
Click to expand...
Click to collapse
Great work!!!
Added to favorite.:good:
Shekor said:
Added to favorite.:good:
Click to expand...
Click to collapse
Everything is for you!!
reboot
hallo..i got a x626...followed the procedure exactlly like you said....but after i installed twrp my phone reboot no more to system....please help me...what should i do...i can enter recovery and also fastboot....but my phone dont open up...is stucked with the sign leeco....and down powered by android
dicknorbert said:
hallo..i got a x626...followed the procedure exactlly like you said....but after i installed twrp my phone reboot no more to system....please help me...what should i do...i can enter recovery and also fastboot....but my phone dont open up...is stucked with the sign leeco....and down powered by android
Click to expand...
Click to collapse
you need to install supersu (root)
without this phone will not start.
Thx
Thank you so much ....now everything is good....
Kychera22 said:
How to Restore a Bricked x620-x626
with all the necessary tools + VIDEO GUIDE
Red state after invalid commands entered in the fastboot mode, after installing Twrp, etc..
The first time I broke the phone after I entered the wrong commands after installing twrp. long tormented to restore. It was necessary to use roms x620, first of all, but after installing this firmware, the screen could be viewed through the mirror.
*after such torment, I thinked, and what prevents me from making (assembling), firmware on version 28, and also without dancing .. screen 180 and mirror..
I used a firmware (stock ROM) s28 for Flashtool for all versions of x620-x626 without upside-down screen, etc.
The archive contains: Video instruction (Russian, English), drivers, firmware, installer TWRP 3.1.1, Super SU, disabling Orange State. A complete set.
1. Section Userdata I did not touch, because probably you need your files (without its firmware)
2. This method (firmware for recovery) is tested on the devices: > 10-x626, 1-x622 with success.
3. Used Stock ROM S28
4. Imei, Nvram will remain untouched!!!
_____________________________________________
Google drive
http://drive.google.com/open?id=1kOAYXA-8SVg8Zx0-OaTLwk0cREHqPG1j
_____________________________________________
Yandex
http://yadi.sk/d/wqqZN_ti3SjqKM
Click to expand...
Click to collapse
Good afternoon
I have already downloaded the file of the two links and all give the message of unknown or damaged file
brunoaraujo1980 said:
Good afternoon
I have already downloaded the file of the two links and all give the message of unknown or damaged file
Click to expand...
Click to collapse
Good evening. Use 7zip or the latest version of winrar.
Kychera22 said:
Good evening. Use 7zip or the latest version of winrar.
Click to expand...
Click to collapse
good night was just that, I downloaded the current winrar version and it flowed perfectly. Thank you so much
Is it possible to get a rom from you with a NVRAM re-write?
My problem is that for more than an year now my phone is dead with BaseBand Unknown.
I can't do anything since the phone won't connect to MAUI META which would be the only possible solution to re-write a new NVRAM.
Can you help me?
laikexpert said:
Brick Restoration | Flashtool | S28 | x620-x626
author: Kychera22
How to Restore a Bricked x620-x626
with all the necessary tools + VIDEO GUIDE
--------------------------------------------------------------
Google Drive
https://drive.google.com/file/d/1kOAYXA-8SVg8Zx0-OaTLwk0cREHqPG1j/view
--------------------------------------------------------------
Yandex
https://yadi.sk/d/wqqZN_ti3SjqKM
--------------------------------------------------------------
Click to expand...
Click to collapse
Pangadaywalker said:
Is it possible to get a rom from you with a NVRAM re-write?
My problem is that for more than an year now my phone is dead with BaseBand Unknown.
I can't do anything since the phone won't connect to MAUI META which would be the only possible solution to re-write a new NVRAM.
Can you help me?
Click to expand...
Click to collapse
do you have nvram.img? or backup?
Unfortunately i don't. And the phone is dead for over and year. Can you please help me.
Pangadaywalker said:
Is it possible to get a rom from you with a NVRAM re-write?
My problem is that for more than an year now my phone is dead with BaseBand Unknown.
I can't do anything since the phone won't connect to MAUI META which would be the only possible solution to re-write a new NVRAM.
Can you help me?
Click to expand...
Click to collapse
I also having same problem with my X626. Still haven't found any solution to fix unknown baseband. Anyone have solution to fix this problem?
mimossmart2 said:
I also having same problem with my X626. Still haven't found any solution to fix unknown baseband. Anyone have solution to fix this problem?
Click to expand...
Click to collapse
If you problem is not like mine, where the baseband is totally screwed, you just need to install the required windows drivers, and get Maui Meta to write a new baseband on the phone.
That will solve your problem.
Mine is a bit more complicated, where the Maui Meta won't detect the phone. I believe only writing the nvram with a special box to fix it. So basically my phone is screwed.
Pangadaywalker said:
Is it possible to get a rom from you with a NVRAM re-write?
My problem is that for more than an year now my phone is dead with BaseBand Unknown.
I can't do anything since the phone won't connect to MAUI META which would be the only possible solution to re-write a new NVRAM.
Can you help me?
Click to expand...
Click to collapse
Pangadaywalker said:
If you problem is not like mine, where the baseband is totally screwed, you just need to install the required windows drivers, and get Maui Meta to write a new baseband on the phone.
That will solve your problem.
Mine is a bit more complicated, where the Maui Meta won't detect the phone. I believe only writing the nvram with a special box to fix it. So basically my phone is screwed.
Click to expand...
Click to collapse
MAUI meta won't detect my phone. Tried restoring stock rom & custom rom, SN Writer, MTK droid tools but no luck at all. I'm still stuck with unknown baseband now.
Any ideas how I can get back my baseband?
mimossmart2 said:
MAUI meta won't detect my phone. Tried restoring stock rom & custom rom, SN Writer, MTK droid tools but no luck at all. I'm still stuck with unknown baseband now.
Any ideas how I can get back my baseband?
Click to expand...
Click to collapse
I believe the only way is to use one of those machines from China to write direct to the memory. Unfortunately i have the sane issue and i tried everything for the last year. It just won't work.
Pangadaywalker said:
I believe the only way is to use one of those machines from China to write direct to the memory. Unfortunately i have the sane issue and i tried everything for the last year. It just won't work.
Click to expand...
Click to collapse
Did you get any solution?
I have the same problem with the NVRAM
Hi,
After trying to flash I was like you can see in the image "nv data corrupted", does anyone know how to solve it?
sk3lt said:
Hi,
After trying to flash I was like you can see in the image "nv data corrupted", does anyone know how to solve it?
Click to expand...
Click to collapse
"Trying to flash" , what exactly did you flash ?
How do you flash it ?
Why dont you flash TWRP followed by ROM of any choice ?
NV normally contained in EFS partition, which can be backed up and flash from TWRP and QPST.
But again, your description is far from clear for us to help you.
otonieru said:
"Trying to flash" , what exactly did you flash ?
How do you flash it ?
Why dont you flash TWRP followed by ROM of any choice ?
NV normally contained in EFS partition, which can be backed up and flash from TWRP and QPST.
But again, your description is far from clear for us to help you.
Click to expand...
Click to collapse
I already flashed with twrp and miflash with stock rom and xiaomi.eu the flash is finished successfully but the nv data corrupted always comes back. Any idea how can I solve this?
sk3lt said:
I already flashed with twrp and miflash with stock rom and xiaomi.eu the flash is finished successfully but the nv data corrupted always comes back. Any idea how can I solve this?
Click to expand...
Click to collapse
When you flash using TWRP, did you actually managed to boot into system ? Or it stuck in recovery ?
Where did the nv corrupted notification appear when u were using TWRP ?
Prior to facing this issue, what you actually did ? I mean, did this phone work before ? Before you start getting this error, what you did, what you install, what you flash, what you delete ? Or did it just suddenly happen with nothing modified ?
otonieru said:
When you flash using TWRP, did you actually managed to boot into system ? Or it stuck in recovery ?
Where did the nv corrupted notification appear when u were using TWRP ?
Prior to facing this issue, what you actually did ? I mean, did this phone work before ? Before you start getting this error, what you did, what you install, what you flash, what you delete ? Or did it just suddenly happen with nothing modified ?
Click to expand...
Click to collapse
Boot up to the Android logo and then return to recovery.
I flashed a room and lost the imei, I tried to recover with a qcn I found but I must have done something wrong.
sk3lt said:
Boot up to the Android logo and then return to recovery.
I flashed a room and lost the imei, I tried to recover with a qcn I found but I must have done something wrong.
Click to expand...
Click to collapse
You gonna need to ask someone to backup their QCN, take out the imei info, give it to you, and flash it using QPST.
otonieru said:
You gonna need to ask someone to backup their QCN, take out the imei info, give it to you, and flash it using QPST.
Click to expand...
Click to collapse
I can't use qpst, because I can't activate usbdebug and the diag port.
Is it possible to give me a hand?
sk3lt said:
I can't use qpst, because I can't activate usbdebug and the diag port.
Is it possible to give me a hand?
Click to expand...
Click to collapse
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
tsongming said:
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
Click to expand...
Click to collapse
I flashed an altered rom, without success I got a brick I'm without recovery and without fastboot I just have a black screen and it's only recognized by the PC in 9008 mode, you have any idea how I can solve it?
sk3lt said:
I flashed an altered rom, without success I got a brick I'm without recovery and without fastboot I just have a black screen and it's only recognized by the PC in 9008 mode, you have any idea how I can solve it?
Click to expand...
Click to collapse
Sorry that you are having these issues, But my comment was based on the photo that was posted on the OP. Typically formatting is the resolution. If you no longer have that screen available, you should contact an authorised repair center to fix it for you.
Otherwise If the phone is bound to your account, you could try what is listed here: https://www.mobilerdx.com/2019/02/xiaomi-mi-8-test-point-boot-xiaomi-mi-8-into-edl-9008-mode.html
Scams or Actual Fixes?
I have recently read about supposed hacks that according to a couple of Chinese BBS sites, has worked for some that require buying a specialised Jtag programming tool which cost about $60, that you use along with altered versions of following files: prog_emmc_firehose_8909.mbn.elf, mi8 persist image, rawprogram0, frp and a patch file. All of which that can all be obtained from here: https://romprovider.com/2019/09/mi-account-remove-xiaomi/ ( UMT Download)
Supposedly Chimera is another option: https://chimeratool.com/en/docs Again I have not used any of these tools with the mi8, I am merely sharing what I read about recently.
By the time you have spent the money acquiring the tools, it seems that you are better off just mailing the phone off to be repaired by an official repair center. Here is a web page that provides a list of official repair centers : https://www.pinoytechnoguide.com/2014/06/xiaomi-service-centers.html
Good Luck and try anything mentioned above at your own risk.
Edit: Have you tried the Flashall.bat method?
That should work since you are seeing the com port.
tsongming said:
This is absolutely not a issue, that requires using Qpst
You simply need to wipe data and follow the on screen prompts. (You will lose all data on your phone.) However the phone will work again.
Click to expand...
Click to collapse
tsongming said:
Sorry that you are having these issues, But my comment was based on the photo that was posted on the OP. Typically formatting is the resolution. If you no longer have that screen available, you should contact an authorised repair center to fix it for you.
Otherwise If the phone is bound to your account, you could try what is listed here: https://www.mobilerdx.com/2019/02/xiaomi-mi-8-test-point-boot-xiaomi-mi-8-into-edl-9008-mode.html
Scams or Actual Fixes?
I have recently read about supposed hacks that according to a couple of Chinese BBS sites, has worked for some that require buying a specialised Jtag programming tool which cost about $60, that you use along with altered versions of following files: prog_emmc_firehose_8909.mbn.elf, mi8 persist image, rawprogram0, frp and a patch file. All of which that can all be obtained from here: https://romprovider.com/2019/09/mi-account-remove-xiaomi/ ( UMT Download)
Supposedly Chimera is another option: https://chimeratool.com/en/docs Again I have not used any of these tools with the mi8, I am merely sharing what I read about recently.
By the time you have spent the money acquiring the tools, it seems that you are better off just mailing the phone off to be repaired by an official repair center. Here is a web page that provides a list of official repair centers : https://www.pinoytechnoguide.com/2014/06/xiaomi-service-centers.html
Good Luck and try anything mentioned above at your own risk.
Edit: Have you tried the Flashall.bat method?
That should work since you are seeing the com port.
Click to expand...
Click to collapse
Hello, thank you for your answer, the mother is not linked to my account I disconnected to do the experiments. in my country i don't have a xiaomi assistance center, i get the error missmatching image and device.
There is no other way to unbrick without buying these tools so expensive that you mentioned
sk3lt said:
Hello, thank you for your answer, the mother is not linked to my account I disconnected to do the experiments. in my country i don't have a xiaomi assistance center, i get the error missmatching image and device.
There is no other way to unbrick without buying these tools so expensive that you mentioned
Click to expand...
Click to collapse
use testpoint method, and flash it using QFIL.
otonieru said:
use testpoint method, and flash it using QFIL.
Click to expand...
Click to collapse
I always get this error.
I already managed to unbrick with a firmware eng eng.
but then when flash with stock rom stays the same again nv data corrupted.
Any solution to solve this nv data corrupted?
sk3lt said:
I always get this error.
I already managed to unbrick with a firmware eng eng.
but then when flash with stock rom stays the same again nv data corrupted.
Any solution to solve this nv data corrupted?
Click to expand...
Click to collapse
root cause of your issue is that you play with wrong qcn and messed up the nv,
wince you cant plugged to qpst, you need someone to make EFS backup for you torestore from twrp
You can restore phones imei if your bootloader is unlocked but only 2nd sim slot will work
How can I do this? Can you help me please?
jokerm90 said:
You can restore phones imei if your bootloader is unlocked but only 2nd sim slot will work
Click to expand...
Click to collapse
How can I do this? Can you help me please?
Dear All,
While trying to install MIUI 12 Beta , I Lost my IMEI
Installed ENG Firmware which allowed my to edit the IMEI using the Maui META ver 10.1816.0.01 but due to corrupted NV Data the phone isn't booting
Anyone can backup and share the NV Data file ?! i found one online but unfortunately it has a password and can't unrar it.
Your support is much appreciated to guide throw fixing this issue.
sk3lt said:
How can I do this? Can you help me please?
Click to expand...
Click to collapse
You need backup EFS and Modem via TWRP first(better with OrangeFox). After you need Magisk first and some manipulation with QCN file via QPST. I will write it later
MohamedYousri said:
Dear All,
While trying to install MIUI 12 Beta , I Lost my IMEI
Installed ENG Firmware which allowed my to edit the IMEI using the Maui META ver 10.1816.0.01 but due to corrupted NV Data the phone isn't booting
Anyone can backup and share the NV Data file ?! i found one online but unfortunately it has a password and can't unrar it.
Your support is much appreciated to guide throw fixing this issue.
Click to expand...
Click to collapse
Maui Meta is for MTK cpu phones. You need QPST
Note 8 Pro is MTK Device