Database Develop

Lenovo a7000 bricked

I have bricked my lenovo a7000 phone. It won't start at all. I had installed twrp . I tried booting into twrp recovery mode, but the screen remains blank. The last battery status I saw was 66 percent. Please help
Another query to the admin of XDA developers
I am using the following procedure to post
I go to this page
http://forum.xda-developers.com/t/lenovo-a7000
then I click, new thread. Then I start my post. I want to know the right procedure to post my queries regarding lenovo a7000

Does sptools detect the phone?

elixir. said:
Does sptools detect the phone?
Click to expand...
Click to collapse
yeah, it does. I did a full stock rom install. took me hours to get things back to normal. Thanks for answering.

archz2 said:
yeah, it does. I did a full stock rom install. took me hours to get things back to normal. Thanks for answering.
Click to expand...
Click to collapse
hi,
From where did you get the stock ROM? I had messed up on a custom ROM and have now ended up with no IMEI and other serial numbers. Unable to connect to any network (both wireless and mobile). Please help.

mohanvgopal said:
hi,
From where did you get the stock ROM? I had messed up on a custom ROM and have now ended up with no IMEI and other serial numbers. Unable to connect to any network (both wireless and mobile). Please help.
Click to expand...
Click to collapse
you can easily find IMEI numbers at the sides of box in which your phone came.
when u get those IMEI numbers.
open engineer mode in your phone. if you dont know how to access it, just download this app called MTK Engineering Mode from here https://play.google.com/store/apps/details?id=com.themonsterit.EngineerStarter&hl=en
open this app, tap on MTK Settings.
then goto CDS Information
then to set IMEI of 'Phone 1' tap on it, Here you can see a command line with “AT+”.
Now just add this command to it EGMR=1,7,”IMEI NO” And press “send at command” button. [ if you want to change the the phone 2 IMEI AT+EGMR=1,10,”NEW IMEI NO”]
restart your phone.
n u are all set.
you can check your IMEI by just dialing *#06#
HIT THANKS IF WORKED

mohanvgopal said:
hi,
From where did you get the stock ROM? I had messed up on a custom ROM and have now ended up with no IMEI and other serial numbers. Unable to connect to any network (both wireless and mobile). Please help.
Click to expand...
Click to collapse
You can find the stock rom in this post. Press thanks if found useful.
http://forum.xda-developers.com/showthread.php?p=60588846
To restore IMEI number, root your phone then use chamelephon app to restore your IMEI numbers.

archz2 said:
You can find the stock rom in this post. Press thanks if found useful.
http://forum.xda-developers.com/showthread.php?p=60588846
Click to expand...
Click to collapse
Hi,
I have downloaded the stock ROM, and when flashing that I had landed into the current problem.
my bad. i should have been little extra careful while flashing.
Also I have got an OTA for S149 now. has anyone else got it?
and I am still have not overcome the IMEI issue.
---------- Post added at 08:24 PM ---------- Previous post was at 08:08 PM ----------
archz2 said:
To restore IMEI number, root your phone then use chamelephon app to restore your IMEI numbers.
Click to expand...
Click to collapse
finally set the IMEI numbers using Chamelephon app. Not sure if it would get erased during next phone reset. Let me wait till I mess up again.

mohanvgopal said:
Hi,
I have downloaded the stock ROM, and when flashing that I had landed into the current problem.
my bad. i should have been little extra careful while flashing.
Also I have got an OTA for S149 now. has anyone else got it?
and I am still have not overcome the IMEI issue.
---------- Post added at 08:24 PM ---------- Previous post was at 08:08 PM ----------
finally set the IMEI numbers using Chamelephon app. Not sure if it would get erased during next phone reset. Let me wait till I mess up again.
Click to expand...
Click to collapse
Your next phone reset will be after months I guess? Why worry? Enjoy the moments of your phone working perfectly

touch issue
I've got a weird issue with my touch. Its on s149
I tried to draw straight horizontal lines but it comes as a curvy lines...... But when I draw vertical lines it doesn't come curvy ....
Can someone tell me if its a hardware issue or a software issue.
I don't know how to attach an image .... So if someone could tell me how to attach an image I'll attach the screenshot

Same problem i am facing , not even twrp recovery mode shows

Help

I need the firmware 7.1.1 of the Moto E4 Plus xt1770 with Scatter file, So i can flash and unbrick my phone...Help Guyz.

Did you have backup of your device nvram ?
How you format your device ?
which tool ? method ?
At this time factory images are not available for any variant of Moto E4.
we need more explanation.

kartik verma said:
Did you have backup of your device nvram ?
How you format your device ?
which tool ? method ?
At this time factory images are not available for any variant of Moto E4.
we need more explanation.
Click to expand...
Click to collapse
I used SP flash tool (format whole flash button). now the phone is hard bricked. not taking charge, didn't power on and it's like a dead phone. For unbricking, the stock rom is needed.

Kris Ibrahimovic said:
I used SP flash tool (format whole flash button). now the phone is hard bricked. not taking charge, didn't power on and it's like a dead phone. For unbricking, the stock rom is needed.
Click to expand...
Click to collapse
Few things your device doesn't have after formatting whole flash.
no preloader in bootloader partition.
no partition table exist in this state.
no nvram/nvdata means no IMEI, no working network, no working wifi etc etc.
one more question !
is it detected by pc or not ?
my view on stock rom requirement is pretty useless. The reason behind this, if someone give you the whole firmware package (it is possible to extract the whole firmware) but they won't give you their device nvram data. After recovering, it has no radio signal merely a music player and nothing else.
It is better to sent your device to the service center.
I also unable to restore firmware through Sp flash tool. The whole firmware dumped with miracle tool and only miracle tool flashable but it gives some strange error "Error 1: no 5A" after this error firmware installation stopped. Another way i found is to flash whole firmware through fastboot tool. Your device must have bootloader in bootloader partition and partition table along with this nvram data required too.
Hope this helps !

kartik verma said:
Few things your device doesn't have after formatting whole flash.
no preloader in bootloader partition.
no partition table exist in this state.
no nvram/nvdata means no IMEI, no working network, no working wifi etc etc.
one more question !
is it detected by pc or not ?
my view on stock rom requirement is pretty useless. The reason behind this, if someone give you the whole firmware package (it is possible to extract the whole firmware) but they won't give you their device nvram data. After recovering, it has no radio signal merely a music player and nothing else.
It is better to sent your device to the service center.
I also unable to restore firmware through Sp flash tool. The whole firmware dumped with miracle tool and only miracle tool flashable but it gives some strange error "Error 1: no 5A" after this error firmware installation stopped. Another way i found is to flash whole firmware through fastboot tool. Your device must have bootloader in bootloader partition and partition table along with this nvram data required too.
Hope this helps !
Click to expand...
Click to collapse
It was not detected on PC..but it detects on SP fash tool bcoz of mediatek drivers..if I clicked flash button and connect the phone, SP flash tool detects...is there any other way to recover my hard bricked phone?

Kris Ibrahimovic said:
It was not detected on PC..but it detects on SP fash tool bcoz of mediatek drivers..if I clicked flash button and connect the phone, SP flash tool detects...is there any other way to recover my hard bricked phone?
Click to expand...
Click to collapse
Yes, it is possible to recover with miracle tool not the sp flash tool. but we need someone who can upload the whole firmware which is of about 2 GB. LOL

kartik verma said:
Yes, it is possible to recover with miracle tool not the sp flash tool. but we need someone who can upload the whole firmware which is of about 2 GB. LOL
Click to expand...
Click to collapse
upload that soon...LOL

Kris Ibrahimovic said:
upload that soon...LOL
Click to expand...
Click to collapse
I have Moto E4 XT1760.

kartik verma said:
I have Moto E4 XT1760.
Click to expand...
Click to collapse
hmm no problem..I wait for xt1773

I fixed it... everything works fine... but Sim cards not detected...gimme a fix dudes

i have the same problem motorola e4 xt1764 please upload the stock rom at&t
---------- Post added at 05:11 PM ---------- Previous post was at 05:08 PM ----------
Kris Ibrahimovic said:
I fixed it... everything works fine... but Sim cards not detected...gimme a fix dudes
Click to expand...
Click to collapse
How did you fix it?
please i need to unbrick my moto e4 xt1764
---------- Post added at 05:16 PM ---------- Previous post was at 05:11 PM ----------
Kris Ibrahimovic said:
I fixed it... everything works fine... but Sim cards not detected...gimme a fix dudes
Click to expand...
Click to collapse
How did you fix it? please
---------- Post added at 05:20 PM ---------- Previous post was at 05:16 PM ----------
kartik verma said:
Few things your device doesn't have after formatting whole flash.
no preloader in bootloader partition.
no partition table exist in this state.
no nvram/nvdata means no IMEI, no working network, no working wifi etc etc.
one more question !
is it detected by pc or not ?
my view on stock rom requirement is pretty useless. The reason behind this, if someone give you the whole firmware package (it is possible to extract the whole firmware) but they won't give you their device nvram data. After recovering, it has no radio signal merely a music player and nothing else.
It is better to sent your device to the service center.
I also unable to restore firmware through Sp flash tool. The whole firmware dumped with miracle tool and only miracle tool flashable but it gives some strange error "Error 1: no 5A" after this error firmware installation stopped. Another way i found is to flash whole firmware through fastboot tool. Your device must have bootloader in bootloader partition and partition table along with this nvram data required too.
Hope this helps !
Click to expand...
Click to collapse
i have the error1: no 5A what can i do?

I found the stock ROM for Moto E4 Plus ( XT1770 ). Indian Variant. I flashed it. It's working perfectly.

Kris Ibrahimovic said:
I fixed it... everything works fine... but Sim cards not detected...gimme a fix dudes
Click to expand...
Click to collapse
How do you restore stock Firmware ??? Can u plz explain ?

Can someone please upload nvram backup file?
I have xt1771 with corrupted nvram and I dont have the backup.

FRP Locked

Hi
Dear friends I have a big problem with FRP. I try a lot of methods but any one of them didnt work. I try:
1. By get in to mail or youtube but i get message that javascript is disable.
2. Get by web like before but i dont have any keyboard.
There is other metod to unlock this FRP? I bought phone a few days ago. In huawei service i must pay 50$

Hi! Try to downgrade the Android firmware to an earlier date.

but how, I dont have trwp even bootloader is locked olny i can in dial up *#*#2846579#*#* and then update but I dont know what i need to copy on sd card

djsobol said:
but how, I dont have trwp even bootloader is locked olny i can in dial up *#*#2846579#*#* and then update but I dont know what i need to copy on sd card
Click to expand...
Click to collapse
Download service ROMs here:-
https://androidhost.ru/
Instructions in zip.
Will work on stock phones.

I found a lot of ROMs but witch one will be good?
LLD-L31

djsobol said:
I found a lot of ROMs but witch one will be good?
LLD-L31
Click to expand...
Click to collapse
Well what model is your phone ?
LLD-L31 ( C434 ) is European.

Yes my country is important?
there is ADR, XAS, XVR what is mean this symbols?

So mine is LLD-L31 8.0.0.136 (C432).
Enter on http://androidhost.ru, and there search for the 8.0.0.125 (C432) firmware, it is the one with June patch, so I guess you can do the Talkback trick on it.

ok I'm downloading all 3 and witch one I should chose?

Upload the picture again.

ok
google

That three are not good.
Search for 8.0.0.125 one.

there arent other, could you tell me or sent a picture witch one i should download?

I will upload a link in a couple of minutes, I am on my phone now.

ok I'm looking forward to download it

djsobol said:
ok I'm looking forward to download it
Click to expand...
Click to collapse
Here's a link for B132 which should be early enough to allow the BL unlock exploit (should you need it) :-
https://androidhost.ru/6ps
---------- Post added at 04:37 PM ---------- Previous post was at 04:36 PM ----------
djsobol said:
there arent other, could you tell me or sent a picture witch one i should download?
Click to expand...
Click to collapse
There are at least 15 to choose from.

ok i unpack it and copy dload on sdcard??
Where i can find tutorial or something like that
@aka.petteri give me elier ver

You know, you can always email Huawei and request your FRP key and just use Fastboot to unlock FRP.

i write to support but they wont help me because i should have recipte and give it to service and pay 40-70$ if I have recipte of corse. In other way they wont help me.

djsobol said:
ok i unpack it and copy dload on sdcard??
Where i can find tutorial or something like that
@aka.petteri give me elier ver
Click to expand...
Click to collapse
Copy complete Dload folder onto root of SD card.
Power off phone.
Hold all three buttons Vol + Vol- Power and forced update should start.
---------- Post added at 04:55 PM ---------- Previous post was at 04:53 PM ----------
djsobol said:
i write to support but they wont help me because i should have recipte and give it to service and pay 40-70$ if I have recipte of corse. In other way they wont help me.
Click to expand...
Click to collapse
If you can prove ownership they will ( should) give you your FRP key, no need to go to a service centre at all.

Is There Any Way To Remove "Orange State Your Dev.." Message?

Hi guys I unlocked my bootloader etc and like everyone else who owns a E4 Plus I get the message "Orange state your device has been unlocked bla blah"
I was wondering is there anyway to remove/hide it? I already searched the forum and most answers were a "no".
But I just wanted to double clarify hence I started this thread.. I know the message only shows up on bootup but like everyone else I would prefer it not to be there..
any replies would be appreciated thanks.
My model is XT1771 Nicklaus
Cheers.

I flashed a bootlogo that covered it. There are several around, pick what you like.

koop1955 said:
I flashed a bootlogo that covered it. There are several around, pick what you like.
Click to expand...
Click to collapse
Could you link me to your boot logo or one similar?
I searched but cant find one specifically hiding the message.
Thanks

koop1955 said:
I flashed a bootlogo that covered it. There are several around, pick what you like.
Click to expand...
Click to collapse
That just apply for the Qualcomm variants, on nicklaus that warning is reported by lk partition on mtk devices, and cant be removed by just changing an custom logo
---------- Post added at 11:20 PM ---------- Previous post was at 11:16 PM ----------
Cobrahaze said:
Could you link me to your boot logo or one similar?
I searched but cant find one specifically hiding the message.
Thanks
Click to expand...
Click to collapse
It cant be removed, at least that you hex patch the lk partition of the device, this message is reported by this partition, it doesn't load an image on boot, it just display this annoying message, and that its why it xant be removed

hetor99 said:
That just apply for the Qualcomm variants, on nicklaus that warning is reported by lk partition on mtk devices, and cant be removed by just changing an custom logo
---------- Post added at 11:20 PM ---------- Previous post was at 11:16 PM ----------
It cant be removed, at least that you hex patch the lk partition of the device, this message is reported by this partition, it doesn't load an image on boot, it just display this annoying message, and that its why it xant be removed
Click to expand...
Click to collapse
Thanks for clearing that up for me.

My apologies for posting incorrect information. The differences between the E4 Plus versions continue to surprise me.

koop1955 said:
My apologies for posting incorrect information. The differences between the E4 Plus versions continue to surprise me.
Click to expand...
Click to collapse
I just got this phone for christmas, There are way too many versions of this phone, so confusion is going be a learning curve, what works on one version doesn't work on another.
So far that's the only downside I have found so far with this phone. Mine is the retail version, xt1775.

TWRP - Need help downloading from Baidu

Can someone download this twrp and upload it to a mirror? It's for the Red Magic 3.
Password is: 6i3i
https://pan.baidu.com/s/1ZdMPjm2fEw...arentPath=/sharelink781715067-606770439204444

+6281281903288 contact me via whatsapp and i will share to you twrp file

tembokbesi said:
+6281281903288 contact me via whatsapp and i will share to you twrp file
Click to expand...
Click to collapse
OK at this point Ill try anything. I have my cell totally unlocked OEM an Bootloader an still have just a fastboot screen an little else no matter what I try and do.
I use whatsapp. Not sure how to add you or contact you through it?
The only thing i used it for was sending info to my boss
---------- Post added at 01:44 PM ---------- Previous post was at 01:43 PM ----------
Bryceicle1971 said:
OK at this point Ill try anything. I have my cell totally unlocked OEM an Bootloader an still have just a fastboot screen an little else no matter what I try and do.
I use whatsapp. Not sure how to add you or contact you through it?
The only thing i used it for was sending info to my boss
Click to expand...
Click to collapse
Edit: just found out how to add you

I already download twrp wait I share after some time

Any Twrp or EDL rom? Currently stuck in bootloop.