Related
...
I hope u find this, i've also a bricked x+1
If anyone have this tool I need too!!
Thanks
Can you get into bootloader mode? Charge the phone and see if you can get into bootloader mode.
I'm on the same boat... Just got my Moto X 2014 bricked... Found the tool and files for the original Moto X, but not for Moto X 2014. I don't think they exist (yet).
---------- Post added at 05:08 PM ---------- Previous post was at 05:03 PM ----------
@JulesJam
I am (and I believe eveybody else on this post is) requesting the tool / files because our smartphones are bricked in a way we can't access the bootloader. The tool Junior asked on the OP is to repair / reflash the bootloader, which probably got corrupt, so there's no way to access it and flash anything through Fastboot.
---------- Post added at 05:11 PM ---------- Previous post was at 05:08 PM ----------
joker2mbr said:
I am (and I believe eveybody else on this post is) requesting the tool / files because our smartphones are bricked in a way we can't access the bootloader. The tool Junior asked on the OP is to repair / reflash the bootloader, which probably got corrupt, so there's no way to access it and flash anything through Fastboot.
Click to expand...
Click to collapse
Ok, yes, if you corrupted the bootloader than you obviously can't get into bootloader mode. But a lot of times people just don't know how to get into bootloader mode when they have a blank screen. So I was asking.
If your screen is blank when you turn on your device and you know the phone is charged, you can press and hold the power button for about 5 seconds, then immediately press and hold volume down and then press and hold power again and hold both for about 4 seconds then release. I have found I need to press and hold both volume up/down then while still holding press power and keep all 3 held down for 4 seconds and then release. I don't know why but pressing and holding all 3 seems to work better for me.
JulesJam said:
Can you get into bootloader mode? Charge the phone and see if you can get into bootloader mode.
Click to expand...
Click to collapse
The screen is only black and phone doesn't get to the fastboot. I've tried a number of ways.
When I connect to the PC, the device is recognized with the name QHSUSB_DLOAD.
When I connect to the charger, the green led flashes constantly.
Ive already have the .hex files
Junior Passos said:
The screen is only black and phone doesn't get to the fastboot. I've tried a number of ways.
When I connect to the PC, the device is recognized with the name QHSUSB_DLOAD.
When I connect to the charger, the green led flashes constantly.
Click to expand...
Click to collapse
The behavior I see here is quite the same. I tried to use the blankflash tool, but as you already discovered, it needs some device specific files (from the bootloader) and the ones available around just won't work with the Moto X 2014... Install the unsigned device driver on Windows is not difficult. The problem is to find these files, that should come directly from Motorola. Without them, we can't restore the bootloader, that is probably corrupted.
---------- Post added at 11:26 PM ---------- Previous post was at 11:22 PM ----------
dashiell_cano said:
Ive already have the .hex files
Click to expand...
Click to collapse
Did you manage to use the files you've found to fix your bootloader? I thought the needed files were like "singleimage_XXXX.bin"... Please let us know your results.
Thanks a lot!
Junior Passos said:
The screen is only black and phone doesn't get to the fastboot. I've tried a number of ways.
When I connect to the PC, the device is recognized with the name QHSUSB_DLOAD.
When I connect to the charger, the green led flashes constantly.
Click to expand...
Click to collapse
Has anyone looked at this process to see if some variation of it can be used to resurrect your device?
http://forum.xda-developers.com/moto-x/general/moto-x-root-pogress-60-t3071602
I am not familiar with the process used here to resurrect a bricked Moto X 2013:
http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
However, I have a file emmc_appsboot.mbn for 5.0 for XT1096 (Verizon Moto X 2014) and from scanning the thread above, that may be a useful file.
I can access to the command system, but with the .bin file ive found i receive the "file to large" or "wrong version" message sometimes.
As you said we need the right .bin file.
dashiell_cano said:
I can access to the command system, but with the .bin file ive found i receive the "file to large" or "wrong version" message sometimes.
As you said we need the right .bin file.
Click to expand...
Click to collapse
do you know what emmc_appsboot.mbn is?
JulesJam said:
do you know what emmc_appsboot.mbn is?
Click to expand...
Click to collapse
As i know the mbn file Is the equivalent to the .hex file, am i wrong?
dashiell_cano said:
As i know the mbn file Is the equivalent to the .hex file, am i wrong?
Click to expand...
Click to collapse
Idk, but I have that file and it is for the aboot partition if anyone wants it I can upload it. But it is for the XT1096, I don't know if that matters or not. Do you want it?
Yes please, with your file, mine and the next files to come maybe together we can solve this puzzle
dashiell_cano said:
Yes please, with your file, mine and the next files to come maybe together we can solve this puzzle
Click to expand...
Click to collapse
https://www.dropbox.com/s/5bu79og4b3oqbug/emmc_appsboot.mbn?dl=0
---------- Post added at 05:07 AM ---------- Previous post was at 05:03 AM ----------
dashiell_cano said:
Yes please, with your file, mine and the next files to come maybe together we can solve this puzzle
Click to expand...
Click to collapse
Also read this:
http://forum.xda-developers.com/showpost.php?p=60635306&postcount=431
What is the emmc software flasher tool? Is it this?
http://androidxda.com/download-emmc-dl-tool
JulesJam said:
https://www.dropbox.com/s/5bu79og4b3oqbug/emmc_appsboot.mbn?dl=0
---------- Post added at 05:07 AM ---------- Previous post was at 05:03 AM ----------
Also read this:
http://forum.xda-developers.com/showpost.php?p=60635306&postcount=431
What is the emmc software flasher tool? Is it this?
http://androidxda.com/download-emmc-dl-tool
Click to expand...
Click to collapse
The flasher tool is a program that let you solve the missing recovery with the qualcomm devices instead of use command lines(its something like rsd vs mfastboot), you need 2 files, .hex file ( or mbn) and .bin file (the emergency recovery). You have the mbn (same as my .hex) we just need the .bin one.
dashiell_cano said:
The flasher tool is a program that let you solve the missing recovery with the qualcomm devices instead of use command lines(its something like rsd vs mfastboot), you need 2 files, .hex file ( or mbn) and .bin file (the emergency recovery). You have the mbn (same as my .hex) we just need the .bin one.
Click to expand...
Click to collapse
Is the .bin file something I can pull from a working device? Or is it inaccessible?
... I really dont know
dashiell_cano said:
... I really dont know
Click to expand...
Click to collapse
The Droid Ultra is very similar to the Moto X 2014, do you think any of these files may work?
http://forum.xda-developers.com/droid-ultra/general/droid-ultra-maxx-brick-recovery-t2830806
maybe this:
MPRG8960_MOTO.zip
I have bricked my lenovo a7000 phone. It won't start at all. I had installed twrp . I tried booting into twrp recovery mode, but the screen remains blank. The last battery status I saw was 66 percent. Please help
Another query to the admin of XDA developers
I am using the following procedure to post
I go to this page
http://forum.xda-developers.com/t/lenovo-a7000
then I click, new thread. Then I start my post. I want to know the right procedure to post my queries regarding lenovo a7000
Does sptools detect the phone?
elixir. said:
Does sptools detect the phone?
Click to expand...
Click to collapse
yeah, it does. I did a full stock rom install. took me hours to get things back to normal. Thanks for answering.
archz2 said:
yeah, it does. I did a full stock rom install. took me hours to get things back to normal. Thanks for answering.
Click to expand...
Click to collapse
hi,
From where did you get the stock ROM? I had messed up on a custom ROM and have now ended up with no IMEI and other serial numbers. Unable to connect to any network (both wireless and mobile). Please help.
mohanvgopal said:
hi,
From where did you get the stock ROM? I had messed up on a custom ROM and have now ended up with no IMEI and other serial numbers. Unable to connect to any network (both wireless and mobile). Please help.
Click to expand...
Click to collapse
you can easily find IMEI numbers at the sides of box in which your phone came.
when u get those IMEI numbers.
open engineer mode in your phone. if you dont know how to access it, just download this app called MTK Engineering Mode from here https://play.google.com/store/apps/details?id=com.themonsterit.EngineerStarter&hl=en
open this app, tap on MTK Settings.
then goto CDS Information
then to set IMEI of 'Phone 1' tap on it, Here you can see a command line with “AT+”.
Now just add this command to it EGMR=1,7,”IMEI NO” And press “send at command” button. [ if you want to change the the phone 2 IMEI AT+EGMR=1,10,”NEW IMEI NO”]
restart your phone.
n u are all set.
you can check your IMEI by just dialing *#06#
HIT THANKS IF WORKED
mohanvgopal said:
hi,
From where did you get the stock ROM? I had messed up on a custom ROM and have now ended up with no IMEI and other serial numbers. Unable to connect to any network (both wireless and mobile). Please help.
Click to expand...
Click to collapse
You can find the stock rom in this post. Press thanks if found useful.
http://forum.xda-developers.com/showthread.php?p=60588846
To restore IMEI number, root your phone then use chamelephon app to restore your IMEI numbers.
archz2 said:
You can find the stock rom in this post. Press thanks if found useful.
http://forum.xda-developers.com/showthread.php?p=60588846
Click to expand...
Click to collapse
Hi,
I have downloaded the stock ROM, and when flashing that I had landed into the current problem.
my bad. i should have been little extra careful while flashing.
Also I have got an OTA for S149 now. has anyone else got it?
and I am still have not overcome the IMEI issue.
---------- Post added at 08:24 PM ---------- Previous post was at 08:08 PM ----------
archz2 said:
To restore IMEI number, root your phone then use chamelephon app to restore your IMEI numbers.
Click to expand...
Click to collapse
finally set the IMEI numbers using Chamelephon app. Not sure if it would get erased during next phone reset. Let me wait till I mess up again.
mohanvgopal said:
Hi,
I have downloaded the stock ROM, and when flashing that I had landed into the current problem.
my bad. i should have been little extra careful while flashing.
Also I have got an OTA for S149 now. has anyone else got it?
and I am still have not overcome the IMEI issue.
---------- Post added at 08:24 PM ---------- Previous post was at 08:08 PM ----------
finally set the IMEI numbers using Chamelephon app. Not sure if it would get erased during next phone reset. Let me wait till I mess up again.
Click to expand...
Click to collapse
Your next phone reset will be after months I guess? Why worry? Enjoy the moments of your phone working perfectly
touch issue
I've got a weird issue with my touch. Its on s149
I tried to draw straight horizontal lines but it comes as a curvy lines...... But when I draw vertical lines it doesn't come curvy ....
Can someone tell me if its a hardware issue or a software issue.
I don't know how to attach an image .... So if someone could tell me how to attach an image I'll attach the screenshot
Same problem i am facing , not even twrp recovery mode shows
I have this problem - my G800F changed it's IMEI to 350695200123951. When that happened I had not touched it (no root, no nothing) at evening I still was able to make calls, but later that night it showed 'not registered on network'. I have tried factory reset, reinstalling the firmware using Kies, then I used odin, tried to make EFS backup and restore, but so far I haven't had any success. So I thought that some of you brilliant minds could help me, maybe there is a way to change the IMEI in efs backup file? The only strange thing that happened to my phone couple of days before this happened is that some random number from Ukraine called me, but for obvious reasons I did not answer it nor did I call it back. So now I'm stuck using my fathers old HTC Wildfire S, I really hope that you could help me, because I want my phone back.
SOS
Sorry no answer from me but exactly the same thing with my S5 mini g800F last week (end Sept), with exactly the same false IMEI, and I think I have now tried everything. No luck. Not the Ukraine phone call though!
Cannot get into "engineermode" which may have been a way to fix this. I loaded a new firmware, still nothing. ANY help will be appreciated but please nothing that asks me to add a "secret code" as the phone does not respond to those. I'm not an expert but got desperate enough to try my hand at a terminal emulator, it did not work. Stopped short of using SDK as the download is huge. Firmware now loaded is android 4.4.2 build number KOT49H.G800FXXU1AOG2. Heeeeelp anybody! The vendor is of no use either, just mumbling "this is a very strange thing, where did you get the phone....." (bought from the guy asking!!)
Warranty service restored the original IMEI
KVE123 said:
Sorry no answer from me but exactly the same thing with my S5 mini g800F last week (end Sept), with exactly the same false IMEI, and I think I have now tried everything. No luck. Not the Ukraine phone call though!
Cannot get into "engineermode" which may have been a way to fix this. I loaded a new firmware, still nothing. ANY help will be appreciated but please nothing that asks me to add a "secret code" as the phone does not respond to those. I'm not an expert but got desperate enough to try my hand at a terminal emulator, it did not work. Stopped short of using SDK as the download is huge. Firmware now loaded is android 4.4.2 build number KOT49H.G800FXXU1AOG2. Heeeeelp anybody! The vendor is of no use either, just mumbling "this is a very strange thing, where did you get the phone....." (bought from the guy asking!!)
Click to expand...
Click to collapse
Just couple of days ago got my phone back from warranty and they fixed it (thought they wouldn't since it was rooted), so I would suggest doing the same thing. At the warranty center I had to explain my problem for about 30 minutes, because they believed that phone couldn't change its IMEI. Also you could try other service centers, because some of them said that they could fix this problem for about 30-50 EUR. I believe the only thing that could help otherwise is something like the z3x box, but it would be more expensive as it costs 100+ USD.
If you download the original stock firmware you can flash the IMEI number back to the phone
:S
No solution has been under warranty , the pochaine time to think about backup your EMEI
Yes yes
there is a backup somewhere between all my external hard drives, memory sticks, cloud servers... And i can't find it, too long ago and too many passwords!! But, no use telling me now to make a "pochaine" backup. I will try the reflash to older version suggestion, and see whether that gives me access to the required features. If not, it is the mountain to climb, of getting to the samsung "support" to tinker with the phone. Glad you you are sorted sunciks. A person from xda did contact me, so lets see if that bears fruit.
KVE123 said:
there is a backup somewhere between all my external hard drives, memory sticks, cloud servers... And i can't find it, too long ago and too many passwords!! But, no use telling me now to make a "pochaine" backup. I will try the reflash to older version suggestion, and see whether that gives me access to the required features. If not, it is the mountain to climb, of getting to the samsung "support" to tinker with the phone. Glad you you are sorted sunciks. A person from xda did contact me, so lets see if that bears fruit.
Click to expand...
Click to collapse
A back up of your phone? I would suggest just making a new back up because it's less time consuming.
BUP
irontaco1 said:
A back up of your phone? I would suggest just making a new back up because it's less time consuming.
Click to expand...
Click to collapse
You are going to have to be patient with an old person here. Making a backup of the current situation? Will it not just copy the existing false IMEI and replace on restore? Please be specific, step by step, as you would for a kid. Regards
KVE123 said:
You are going to have to be patient with an old person here. Making a backup of the current situation? Will it not just copy the existing false IMEI and replace on restore? Please be specific, step by step, as you would for a kid. Regards
Click to expand...
Click to collapse
Nope it shouldn't. The IMEI number is installed with the firmware. So if you back it up and factory reset, it should fix it.
---------- Post added at 01:43 PM ---------- Previous post was at 01:39 PM ----------
KVE123 said:
You are going to have to be patient with an old person here. Making a backup of the current situation? Will it not just copy the existing false IMEI and replace on restore? Please be specific, step by step, as you would for a kid. Regards
Click to expand...
Click to collapse
If factory reseting doesn't work, then I suggest flashing the firmware manually.
BUP
OK I have tried this before, but just tried again. Does not work or I'm not doing it correctly.
What's the model number?
Reflash
KVE123 said:
OK I have tried this before, but just tried again. Does not work or I'm not doing it correctly.
Click to expand...
Click to collapse
Meaning tried to backup and factory reset. Now in process of manual flashing (via Kies). Previously found that Kies would download for an hour and then say "unexpected error...." so have not used it in more than two years. Anyway here we go again.
Model is SD-G800F [samsung galaxy s5 mini]
---------- Post added at 04:20 PM ---------- Previous post was at 04:09 PM ----------
KVE123 said:
Meaning tried to backup and factory reset. Now in process of manual flashing (via Kies). Previously found that Kies would download for an hour and then say "unexpected error...." so have not used it in more than two years. Anyway here we go again.
Model is SD-G800F [samsung galaxy s5 mini]
Click to expand...
Click to collapse
Correction = SM-G800F
KVE123 said:
Meaning tried to backup and factory reset. Now in process of manual flashing (via Kies). Previously found that Kies would download for an hour and then say "unexpected error...." so have not used it in more than two years. Anyway here we go again.
Model is SD-G800F [samsung galaxy s5 mini]
---------- Post added at 04:20 PM ---------- Previous post was at 04:09 PM ----------
Correction = SM-G800F
Click to expand...
Click to collapse
So you get an error when backing it up?
kies
irontaco1 said:
So you get an error when backing it up?
Click to expand...
Click to collapse
No, I mean downloading the firmware upgrade. It will download the new files but not install. This was long ago. Right now I get to tools to upgrade and initialise and get the message "does not support initializing" I give up!
No don't give up, just download the firmware and flash it with ODIN. If you need my to explain that, leave me an email and I'll send you the instructions.
irontaco1 said:
No don't give up, just download the firmware and flash it with ODIN. If you need my to explain that, leave me an email and I'll send you the instructions.
Click to expand...
Click to collapse
What you propose was the second thing I did. The first was doing a factory reset with the older version of the firmware (what the phone came out with). Neither steps worked. The firmware I flashed was (Build number) KOT49H.G800FXXU1AOG2. Which btw Kies indicates as the latest version.
Don't use kies
---------- Post added at 05:09 PM ---------- Previous post was at 04:50 PM ----------
The only reason I need an email from you is because XDA won't let me post links. The instructions I'm providing contain links so you can fix your problem.
email
[/COLOR]The only reason I need an email from you is because XDA won't let me post links. The instructions I'm providing contain links so you can fix your problem.[/QUOTE]
Kies does not work anyway
Can do (email) but not on this open forum. Use the private messages
Added edit in wrong place but, given the phone to samsung tech. Will post the outcome somewhere next week
irontaco1 said:
Don't use kies
---------- Post added at 05:09 PM ---------- Previous post was at 04:50 PM ----------
The only reason I need an email from you is because XDA won't let me post links. The instructions I'm providing contain links so you can fix your problem.
Click to expand...
Click to collapse
Can you help me please, i have the same probleme one week ago, without solutions, i pm you, please help me!
same problem here
Hi
Dear friends I have a big problem with FRP. I try a lot of methods but any one of them didnt work. I try:
1. By get in to mail or youtube but i get message that javascript is disable.
2. Get by web like before but i dont have any keyboard.
There is other metod to unlock this FRP? I bought phone a few days ago. In huawei service i must pay 50$
Hi! Try to downgrade the Android firmware to an earlier date.
but how, I dont have trwp even bootloader is locked olny i can in dial up *#*#2846579#*#* and then update but I dont know what i need to copy on sd card
djsobol said:
but how, I dont have trwp even bootloader is locked olny i can in dial up *#*#2846579#*#* and then update but I dont know what i need to copy on sd card
Click to expand...
Click to collapse
Download service ROMs here:-
https://androidhost.ru/
Instructions in zip.
Will work on stock phones.
I found a lot of ROMs but witch one will be good?
LLD-L31
djsobol said:
I found a lot of ROMs but witch one will be good?
LLD-L31
Click to expand...
Click to collapse
Well what model is your phone ?
LLD-L31 ( C434 ) is European.
Yes my country is important?
there is ADR, XAS, XVR what is mean this symbols?
So mine is LLD-L31 8.0.0.136 (C432).
Enter on http://androidhost.ru, and there search for the 8.0.0.125 (C432) firmware, it is the one with June patch, so I guess you can do the Talkback trick on it.
ok I'm downloading all 3 and witch one I should chose?
Upload the picture again.
ok
google
That three are not good.
Search for 8.0.0.125 one.
there arent other, could you tell me or sent a picture witch one i should download?
I will upload a link in a couple of minutes, I am on my phone now.
ok I'm looking forward to download it
djsobol said:
ok I'm looking forward to download it
Click to expand...
Click to collapse
Here's a link for B132 which should be early enough to allow the BL unlock exploit (should you need it) :-
https://androidhost.ru/6ps
---------- Post added at 04:37 PM ---------- Previous post was at 04:36 PM ----------
djsobol said:
there arent other, could you tell me or sent a picture witch one i should download?
Click to expand...
Click to collapse
There are at least 15 to choose from.
ok i unpack it and copy dload on sdcard??
Where i can find tutorial or something like that
@aka.petteri give me elier ver
You know, you can always email Huawei and request your FRP key and just use Fastboot to unlock FRP.
i write to support but they wont help me because i should have recipte and give it to service and pay 40-70$ if I have recipte of corse. In other way they wont help me.
djsobol said:
ok i unpack it and copy dload on sdcard??
Where i can find tutorial or something like that
@aka.petteri give me elier ver
Click to expand...
Click to collapse
Copy complete Dload folder onto root of SD card.
Power off phone.
Hold all three buttons Vol + Vol- Power and forced update should start.
---------- Post added at 04:55 PM ---------- Previous post was at 04:53 PM ----------
djsobol said:
i write to support but they wont help me because i should have recipte and give it to service and pay 40-70$ if I have recipte of corse. In other way they wont help me.
Click to expand...
Click to collapse
If you can prove ownership they will ( should) give you your FRP key, no need to go to a service centre at all.
I'm having a problem with the bootloader, it is currently in "flashing_locked", I already tried to flash a rom stock, but the "flash permission denied", and the oem_unlocking is "connect to the internet or contact your carrier" but it does not work the operator chip and the Wi-Fi!
does anyone have a solution for this?
sorry for my flawed english
Coxinha2139 said:
I'm having a problem with the bootloader, it is currently in "flashing_locked", I already tried to flash a rom stock, but the "flash permission denied", and the oem_unlocking is "connect to the internet or contact your carrier" but it does not work the operator chip and the Wi-Fi!
does anyone have a solution for this?
sorry for my flawed english
Click to expand...
Click to collapse
Unlock the bootloader following
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my ali using XDA Labs
Coxinha2139 said:
I'm having a problem with the bootloader, it is currently in "flashing_locked", I already tried to flash a rom stock, but the "flash permission denied", and the oem_unlocking is "connect to the internet or contact your carrier" but it does not work the operator chip and the Wi-Fi!
does anyone have a solution for this?
sorry for my flawed english
Click to expand...
Click to collapse
I am in the same situation. Did you find a solution?
---------- Post added at 05:36 PM ---------- Previous post was at 05:34 PM ----------
it does not work
sd_shadow said:
Unlock the bootloader following
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
the "OEM unlocking" option is grayed out, I can't do anything
pepins said:
I am in the same situation. Did you find a solution?
---------- Post added at 05:36 PM ---------- Previous post was at 05:34 PM ----------
it does not work
Click to expand...
Click to collapse
good to know i'm not the only one
I keep looking for possible solutions, any solution will be shared here:good:
Some say a factory reset had helped them. Or try it with or without a SIM card.
thanks but the problem is not so simple
---------- Post added at 06:38 PM ---------- Previous post was at 06:33 PM ----------
the only possible solution is to provoke a hard brick in order to enter EDL mode. but how?
pepins said:
thanks but the problem is not so simple
---------- Post added at 06:38 PM ---------- Previous post was at 06:33 PM ----------
the only possible solution is to provoke a hard brick in order to enter EDL mode. but how?
Click to expand...
Click to collapse
I thought the same thing
Coxinha2139 said:
I thought the same thing
Click to expand...
Click to collapse
any progress?
i've been shutdown now, so have lots of time
digitaljeff said:
any progress?
i've been shutdown now, so have lots of time
Click to expand...
Click to collapse
still has no progress
I didn't recognize your wifi connection... Sorry!
Have you tried bluetooth-/USB-tethering to get online? You find it in same menu as wifi-hotspot settings.
WoKoschekk said:
I didn't recognize your wifi connection... Sorry!
Have you tried bluetooth-/USB-tethering to get online? You find it in same menu as wifi-hotspot settings.
Click to expand...
Click to collapse
I already tried, but it didn't work
https://support.google.com/pixelphone/forum/AAAAb4-OgUsst_UwpbjgNk/?hl=it
Lupask said:
https://support.google.com/pixelphone/forum/AAAAb4-OgUsst_UwpbjgNk/?hl=it
Click to expand...
Click to collapse
the problem I'm having is not that simple!
did anyone find any solution?
pepins said:
thanks but the problem is not so simple
---------- Post added at 06:38 PM ---------- Previous post was at 06:33 PM ----------
the only possible solution is to provoke a hard brick in order to enter EDL mode. but how?
Click to expand...
Click to collapse
have you tried
Code:
fastboot -i 0x2b4c oem reboot-edl
or
Code:
adb reboot edl
i cant remember seeing if you had access to ADB and/or fastboot
digitaljeff said:
have you tried
Code:
fastboot -i 0x2b4c oem reboot-edl
or
Code:
adb reboot edl
i cant remember seeing if you had access to ADB and/or fastboot
Click to expand...
Click to collapse
is in "<waiting device>", motorola drivers are updated
nothing works
Coxinha2139 said:
have you tried
or
is in "<waiting device>", motorola drivers are updated
Click to expand...
Click to collapse
Fastboot commands only work if d device is in fastboot mode
Adb commands only work when USB debugging is active (device is booted normally or custom recovery is booted)
Sent from my ali using XDA Labs