Database Develop

...

...

I hope u find this, i've also a bricked x+1

If anyone have this tool I need too!!
Thanks

Can you get into bootloader mode? Charge the phone and see if you can get into bootloader mode.

I'm on the same boat... Just got my Moto X 2014 bricked... Found the tool and files for the original Moto X, but not for Moto X 2014. I don't think they exist (yet).
---------- Post added at 05:08 PM ---------- Previous post was at 05:03 PM ----------
@JulesJam
I am (and I believe eveybody else on this post is) requesting the tool / files because our smartphones are bricked in a way we can't access the bootloader. The tool Junior asked on the OP is to repair / reflash the bootloader, which probably got corrupt, so there's no way to access it and flash anything through Fastboot.
---------- Post added at 05:11 PM ---------- Previous post was at 05:08 PM ----------

joker2mbr said:
I am (and I believe eveybody else on this post is) requesting the tool / files because our smartphones are bricked in a way we can't access the bootloader. The tool Junior asked on the OP is to repair / reflash the bootloader, which probably got corrupt, so there's no way to access it and flash anything through Fastboot.
Click to expand...
Click to collapse
Ok, yes, if you corrupted the bootloader than you obviously can't get into bootloader mode. But a lot of times people just don't know how to get into bootloader mode when they have a blank screen. So I was asking.
If your screen is blank when you turn on your device and you know the phone is charged, you can press and hold the power button for about 5 seconds, then immediately press and hold volume down and then press and hold power again and hold both for about 4 seconds then release. I have found I need to press and hold both volume up/down then while still holding press power and keep all 3 held down for 4 seconds and then release. I don't know why but pressing and holding all 3 seems to work better for me.

JulesJam said:
Can you get into bootloader mode? Charge the phone and see if you can get into bootloader mode.
Click to expand...
Click to collapse
The screen is only black and phone doesn't get to the fastboot. I've tried a number of ways.
When I connect to the PC, the device is recognized with the name QHSUSB_DLOAD.
When I connect to the charger, the green led flashes constantly.

Ive already have the .hex files

Junior Passos said:
The screen is only black and phone doesn't get to the fastboot. I've tried a number of ways.
When I connect to the PC, the device is recognized with the name QHSUSB_DLOAD.
When I connect to the charger, the green led flashes constantly.
Click to expand...
Click to collapse
The behavior I see here is quite the same. I tried to use the blankflash tool, but as you already discovered, it needs some device specific files (from the bootloader) and the ones available around just won't work with the Moto X 2014... Install the unsigned device driver on Windows is not difficult. The problem is to find these files, that should come directly from Motorola. Without them, we can't restore the bootloader, that is probably corrupted.
---------- Post added at 11:26 PM ---------- Previous post was at 11:22 PM ----------
dashiell_cano said:
Ive already have the .hex files
Click to expand...
Click to collapse
Did you manage to use the files you've found to fix your bootloader? I thought the needed files were like "singleimage_XXXX.bin"... Please let us know your results.
Thanks a lot!

Junior Passos said:
The screen is only black and phone doesn't get to the fastboot. I've tried a number of ways.
When I connect to the PC, the device is recognized with the name QHSUSB_DLOAD.
When I connect to the charger, the green led flashes constantly.
Click to expand...
Click to collapse
Has anyone looked at this process to see if some variation of it can be used to resurrect your device?
http://forum.xda-developers.com/moto-x/general/moto-x-root-pogress-60-t3071602
I am not familiar with the process used here to resurrect a bricked Moto X 2013:
http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
However, I have a file emmc_appsboot.mbn for 5.0 for XT1096 (Verizon Moto X 2014) and from scanning the thread above, that may be a useful file.

I can access to the command system, but with the .bin file ive found i receive the "file to large" or "wrong version" message sometimes.
As you said we need the right .bin file.

dashiell_cano said:
I can access to the command system, but with the .bin file ive found i receive the "file to large" or "wrong version" message sometimes.
As you said we need the right .bin file.
Click to expand...
Click to collapse
do you know what emmc_appsboot.mbn is?

JulesJam said:
do you know what emmc_appsboot.mbn is?
Click to expand...
Click to collapse
As i know the mbn file Is the equivalent to the .hex file, am i wrong?

dashiell_cano said:
As i know the mbn file Is the equivalent to the .hex file, am i wrong?
Click to expand...
Click to collapse
Idk, but I have that file and it is for the aboot partition if anyone wants it I can upload it. But it is for the XT1096, I don't know if that matters or not. Do you want it?

Yes please, with your file, mine and the next files to come maybe together we can solve this puzzle

dashiell_cano said:
Yes please, with your file, mine and the next files to come maybe together we can solve this puzzle
Click to expand...
Click to collapse
https://www.dropbox.com/s/5bu79og4b3oqbug/emmc_appsboot.mbn?dl=0
---------- Post added at 05:07 AM ---------- Previous post was at 05:03 AM ----------
dashiell_cano said:
Yes please, with your file, mine and the next files to come maybe together we can solve this puzzle
Click to expand...
Click to collapse
Also read this:
http://forum.xda-developers.com/showpost.php?p=60635306&postcount=431
What is the emmc software flasher tool? Is it this?
http://androidxda.com/download-emmc-dl-tool

JulesJam said:
https://www.dropbox.com/s/5bu79og4b3oqbug/emmc_appsboot.mbn?dl=0
---------- Post added at 05:07 AM ---------- Previous post was at 05:03 AM ----------
Also read this:
http://forum.xda-developers.com/showpost.php?p=60635306&postcount=431
What is the emmc software flasher tool? Is it this?
http://androidxda.com/download-emmc-dl-tool
Click to expand...
Click to collapse
The flasher tool is a program that let you solve the missing recovery with the qualcomm devices instead of use command lines(its something like rsd vs mfastboot), you need 2 files, .hex file ( or mbn) and .bin file (the emergency recovery). You have the mbn (same as my .hex) we just need the .bin one.

dashiell_cano said:
The flasher tool is a program that let you solve the missing recovery with the qualcomm devices instead of use command lines(its something like rsd vs mfastboot), you need 2 files, .hex file ( or mbn) and .bin file (the emergency recovery). You have the mbn (same as my .hex) we just need the .bin one.
Click to expand...
Click to collapse
Is the .bin file something I can pull from a working device? Or is it inaccessible?

... I really dont know

dashiell_cano said:
... I really dont know
Click to expand...
Click to collapse
The Droid Ultra is very similar to the Moto X 2014, do you think any of these files may work?
http://forum.xda-developers.com/droid-ultra/general/droid-ultra-maxx-brick-recovery-t2830806
maybe this:
MPRG8960_MOTO.zip

Bootloader unlock theory 2

I possibly found that the lg g4 can connect a serial console when in fast-boot and android with limited access, and that the boot-loader is based on little kernel
codeaurora.org/blogs/little-kernel-based-android-bootloader
It may be possible to connect uart via serial and map out how the bootrom loads the sbl and (aboot (bootloader))and possibly find a way to unlock the boot-loader
newandroidbook.com/Articles/aboot.html
so far acessing fastboot with a nuked laf partition only specific fastboot commands work. can not get oem-id or reboot/continue via fastboot
console=
/dev/tty
/dev/ttyHS0
/dev/ttyHSL0
/dev/ttyHSL1

gefiltefish1478 said:
I possibly found that the lg g4 can connect a serial console when in fast-boot and android with limited access, and that the boot-loader is based on little kernel
codeaurora.org/blogs/little-kernel-based-android-bootloader
It may be possible to connect uart via serial and map out how the bootrom loads the sbl and (aboot (bootloader))and possibly find a way to unlock the boot-loader
newandroidbook.com/Articles/aboot.html
so far acessing fastboot with a nuked laf partition only specific fastboot commands work. can not get oem-id or reboot/continue via fastboot
console=
/dev/tty
/dev/ttyHS0
/dev/ttyHSL0
/dev/ttyHSL1
Click to expand...
Click to collapse
Try posting this in here: http://forum.xda-developers.com/g4/help/unlock-technical-steps-to-make-unlocked-t3165391
Or even the general G4 forum; the audience appears bigger and you'll probably be able to get more brains taking a look at this!
It's quite interesting.

Dude, I was literally coming here to see if anyone had tried anything like USB serial console the way you'd do with like a raspberry pi or a more recent thin client and found this thread with the search feature.
I'm glad to see that it does, in fact, work. I was about to pitch the theory, but it seems you've not only arrived at the same theory, but have tried it yourself. +thanks for posting the results dude. Much appreciated. Hopefully this will lead to some kind of progress otherwise I'm just going to use an upgrade to get something else and sell my G4. I'm really getting tired of the total lack of ROMs. This isn't 2008 where only a couple carriers have Android phones and the developer base is tiny. What company thinks it's SMART to create only one model that can have the bootloader unlocked and then NOT make that model available on all carriers at the off-contract price?!

I'm guessing there is no way to edit the LK, and implement these changes to re enable fastboot commands without it throwing some type of error due to the fact of it not being signed? -
To selectively enable any fastbootcommand on user/production build, add the command as shown below:
File: bootable/bootloader/lk/app/aboot/aboot.c
Function: void aboot_fastboot_register_commands(void)
structfastboot_cmd_desccmd_list[] = {
/* By default the enabled list is empty. */
{““, NULL},
/* move commands enclosed within the below ifndefto here
* if they need to be enabled in user build.
*/
#ifndefDISABLE_FASTBOOT_CMDS
/* Register the following commands only for non-user builds */
{“flash:”, cmd_flash},
{“erase:”, cmd_erase},
{“boot”, cmd_boot},
{“continue”, cmd_continue},
{“reboot”, cmd_reboot},
{“reboot-bootloader”, cmd_reboot_bootloader},
{“oemunlock”, cmd_oem_unlock},
{“oemlock”, cmd_oem_lock},
{“oemverified”, cmd_oem_verified},
{“oemdevice-info”, cmd_oem_devinfo},
{“oemenable-charger-screen”, cmd_oem_enable_charger_screen},
{“oemdisable-charger-screen”, cmd_oem_disable_charger_screen},
{“oem-select-display-panel”, cmd_oem_select_display_panel},
#endif
};

Can we flash aboot of H811 to LS991 ?

Tctien342 said:
Can we flash aboot of H811 to LS991 ?
Click to expand...
Click to collapse
Nope i already asked that one

bump

TheMadScientist420 said:
bump
Click to expand...
Click to collapse
Any chance this will work? http://www.droidviews.com/unlock-bootloader-twrp-root-lg-v20/
When typed " id" in terminal i got similar results to what is shown in instructions.. Im on ls991zvf..

lowkeyst4tus said:
Any chance this will work? http://www.droidviews.com/unlock-bootloader-twrp-root-lg-v20/
When typed " id" in terminal i got similar results to what is shown in instructions.. Im on ls991zvf..
Click to expand...
Click to collapse
only prob is still oh never mind i do have a twrp lol i forgot kernals wouldnt be same we would need i thing the debug bootloader for ls991 which i actally read the other day on something trying to find us one.
in theory a debug or engineering bl should overite a qfuse in a way kinda thing device model specific but firmware versions usually dont matter or at least the few ive messed with on samsungs.
im in no way a dev but if someone could possibly mod one of the debug bls for us then yes may be possible because if im not mistaken the v20s are locked as tight as ours arent they`
---------- Post added at 04:19 PM ---------- Previous post was at 04:12 PM ----------
lowkeyst4tus said:
Any chance this will work? http://www.droidviews.com/unlock-bootloader-twrp-root-lg-v20/
When typed " id" in terminal i got similar results to what is shown in instructions.. Im on ls991zvf..
Click to expand...
Click to collapse
my g4 may be dying very soon i chucked it pretty hard the other day enough to crack the mother board near the noise cancelling mic and earpiece. destrotyed rear camera. bent the lcd and mother board in a bad kinda way . i might be down tonight to try it with v20s bootloader for the hell of it.
i had a spare lcd with a busted gorilla glass i put back on it lol 4 screen on my g4.
u gonna be around about 8 pm eastern time tonight ima dl most of the files now and when my kids goto bed we can try this with mine of coarse im not out anything if i hard brick and itll give me a reason to find a method to un hardbrick. i got alll thi .bins and firmware extractors if i need to make new boot images. i run cdma workshop qpst dfs all thge good old software i made my own ls991 .dll for old lg flashtool
plus my octobox came in finnaly with jtag
---------- Post added at 04:25 PM ---------- Previous post was at 04:19 PM ----------
im dling the v20 rom and going to attempt to rplace the system and stuff with my rooted zv6 system i got a couple ideas up my sleave on this one
---------- Post added at 04:29 PM ---------- Previous post was at 04:25 PM ----------
https://forum.xda-developers.com/v20/development/ls997vs995h910-dirtysanta-bootloader-t3519410
---------- Post added at 04:38 PM ---------- Previous post was at 04:29 PM ----------
screw it i aint got nothing goin on now im goin for it

TheMadScientist420 said:
only prob is still oh never mind i do have a twrp lol i forgot kernals wouldnt be same we would need i thing the debug bootloader for ls991 which i actally read the other day on something trying to find us one.
in theory a debug or engineering bl should overite a qfuse in a way kinda thing device model specific but firmware versions usually dont matter or at least the few ive messed with on samsungs.
im in no way a dev but if someone could possibly mod one of the debug bls for us then yes may be possible because if im not mistaken the v20s are locked as tight as ours arent they`
---------- Post added at 04:19 PM ---------- Previous post was at 04:12 PM ----------
my g4 may be dying very soon i chucked it pretty hard the other day enough to crack the mother board near the noise cancelling mic and earpiece. destrotyed rear camera. bent the lcd and mother board in a bad kinda way . i might be down tonight to try it with v20s bootloader for the hell of it.
i had a spare lcd with a busted gorilla glass i put back on it lol 4 screen on my g4.
u gonna be around about 8 pm eastern time tonight ima dl most of the files now and when my kids goto bed we can try this with mine of coarse im not out anything if i hard brick and itll give me a reason to find a method to un hardbrick. i got alll thi .bins and firmware extractors if i need to make new boot images. i run cdma workshop qpst dfs all thge good old software i made my own ls991 .dll for old lg flashtool
plus my octobox came in finnaly with jtag
---------- Post added at 04:25 PM ---------- Previous post was at 04:19 PM ----------
im dling the v20 rom and going to attempt to rplace the system and stuff with my rooted zv6 system i got a couple ideas up my sleave on this one
---------- Post added at 04:29 PM ---------- Previous post was at 04:25 PM ----------
https://forum.xda-developers.com/v20/development/ls997vs995h910-dirtysanta-bootloader-t3519410
---------- Post added at 04:38 PM ---------- Previous post was at 04:29 PM ----------
screw it i aint got nothing goin on now im goin for it
Click to expand...
Click to collapse
Yes i will be around.. I hope you have success.. I like the sprint variant for alot of reasons.. I think the octobox might do dumps to..

lowkeyst4tus said:
Yes i will be around.. I hope you have success.. I like the sprint variant for alot of reasons.. I think the octobox might do dumps to..
Click to expand...
Click to collapse
i think it does too
---------- Post added at 06:15 PM ---------- Previous post was at 05:50 PM ----------
gefiltefish1478 said:
I possibly found that the lg g4 can connect a serial console when in fast-boot and android with limited access, and that the boot-loader is based on little kernel
codeaurora.org/blogs/little-kernel-based-android-bootloader
It may be possible to connect uart via serial and map out how the bootrom loads the sbl and (aboot (bootloader))and possibly find a way to unlock the boot-loader
newandroidbook.com/Articles/aboot.html
so far acessing fastboot with a nuked laf partition only specific fastboot commands work. can not get oem-id or reboot/continue via fastboot
console=
/dev/tty
/dev/ttyHS0
/dev/ttyHSL0
/dev/ttyHSL1
Click to expand...
Click to collapse
Hey man u still around

I flashed one of the boot images on mine with. Twrp. And of coarse secure boot erroors so i have to restore and retwrp

TheMadScientist420 said:
I flashed one of the boot images on mine with. Twrp. And of coarse secure boot erroors so i have to restore and retwrp
Click to expand...
Click to collapse
Have you tried the octopus box bootloader unlock?

lowkeyst4tus said:
Have you tried the octopus box bootloader unlock?
Click to expand...
Click to collapse
no
i didnt even know it could

Yea after you mentioned you had one, i spent hours looking up what it can do.. It sim unlock, bootloader unlock, repair imei, hardbrick.. Who knows what else.. The cheapest one i found was $100..

lowkeyst4tus said:
Yea after you mentioned you had one, i spent hours looking up what it can do.. It sim unlock, bootloader unlock, repair imei, hardbrick.. Who knows what else.. The cheapest one i found was $100..
Click to expand...
Click to collapse
**** i spent 259. I got it for iemi repairs. And hard brick fix for g4 and a couple old htcs i have.

TheMadScientist420 said:
**** i spent 259. I got it for iemi repairs. And hard brick fix for g4 and a couple old htcs i have.
Click to expand...
Click to collapse
Im working on getting it.. Expensive but worth every penny.. As far as using it to unlock the bootloader, ive seen it done just by clicking the option in the software that should have came with it.. Ive seen it work with 3rd party jtaging software..
---------- Post added at 10:50 AM ---------- Previous post was at 10:19 AM ----------
Im gonna try calling Sprint today and asking for a bootloader unlock..
---------- Post added at 10:56 AM ---------- Previous post was at 10:50 AM ----------
TheMadScientist420 said:
**** i spent 259. I got it for iemi repairs. And hard brick fix for g4 and a couple old htcs i have.
Click to expand...
Click to collapse
Can this work via lg flash tool to convert say a ls991 to h811? Is there any special ools needed like octopus box?

I dont think we can cross flash to811. Ive tried askin that one may be possible with box but doibtfull
And sprint wont unlock bl. Only lg can. They would have to basicly give u the signature to sign ure own images. Unless they offer unlock when nougats released

TheMadScientist420 said:
I dont think we can cross flash to811. Ive tried askin that one may be possible with box but doibtfull
And sprint wont unlock bl. Only lg can. They would have to basicly give u the signature to sign ure own images. Unless they offer unlock when nougats released
Click to expand...
Click to collapse
http://forums.easy-firmware.com/showthread.php?9084-Convert-lg-tot

U gotta pay for the files. And thats the only site claims it can be done tht i see
---------- Post added at 11:43 AM ---------- Previous post was at 11:28 AM ----------
lowkeyst4tus said:
http://forums.easy-firmware.com/showthread.php?9084-Convert-lg-tot
Click to expand...
Click to collapse
Yea i signed up for that site a long time ago. And its a pay site. Cant find that tot any where else and not a garanty

Help unbrick HTC desire 626

Hi everyone, i'm trying to root my phone for few day ago, so yesterday i tryed to by using Windroid. It successfully unlock my bootloader. then i press, flash TWRP, windroid told me everything was okay, and then i pressed root now.It tolds me that root has been successfull, but my phone doesn't look to be agree. Indeed i've got the charging screen, and i can't obtain anything else. VolumDown+Power don't do anything same for Power and VolumUP+Power, it just turn on and off the charging screen. Do you have any tips ? there is something i can do ??
I've got an HTC desire 626 from sfr; CPU-Z told me (when it was working) that my phone came from vodafone fr .
Helps me
Ps : sorry my english i'm not an english man in new york ^^

Any info ? :/

download this and put it in your SD card
https://mega.nz/#!4JI2yDgD!zqDl-_D1q...sLXEDE1HzDMgPY
Then what you need to do is boot into download mode and it will ask you automatically if you want to flash it Say yes
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
oh woops didn't see all of it you cant even get into download mode?
---------- Post added at 12:28 PM ---------- Previous post was at 12:21 PM ----------
how long do you hold the vol-down and power?

Mr_DerpFace1337 said:
download this and put it in your SD card
https://mega.nz/#!4JI2yDgD!zqDl-_D1q...sLXEDE1HzDMgPY
Then what you need to do is boot into download mode and it will ask you automatically if you want to flash it Say yes
Could you share the key?
Click to expand...
Click to collapse

Oh my god I can't believe I forgot the key
!zqDl-_D1qG-UoaNadCmDitdiZRtLMsLXEDE1HzDMgPY

Baseband version unknown, IMEI lost.

Hi guys...
I tried this post: https://forum.xda-developers.com/oneplus-3/how-to/fix-empty-imei-unknown-baseband-sim-t3480781 however none of the 3 methods worked. The first method did not work.
The second and third methods say:
dd: /dev/block/bootdevice/by-name/modemst1: No space left on device".
Also tried the fastboot commands and got "FAILED (remote: Partition flashing is not allowed)"
Any ideas on how to solve this?
I have already tried the unbrick tool several times, but it does not work, I still do it, without any connectivity.
Thanks in advance

Nobody knows anything?

You need to flash firmware again
https://forum.xda-developers.com/oneplus-3t/how-to/firmware-beta-10-t3631166
Try this thread
---------- Post added at 10:38 PM ---------- Previous post was at 10:24 PM ----------
https://forum.xda-developers.com/oneplus-3t/how-to/firmware-modem-collection-flashable-zips-t3565535
Try using this thread also

Solved, thanks to all, i use QFIL and qcnfile...

Can you please say the steps and give the sownload links????¿
parkpark9999 said:
Solved, thanks to all, i use QFIL and qcnfile...
Click to expand...
Click to collapse
Please give download links and steps

TWRP - Need help downloading from Baidu

Can someone download this twrp and upload it to a mirror? It's for the Red Magic 3.
Password is: 6i3i
https://pan.baidu.com/s/1ZdMPjm2fEw...arentPath=/sharelink781715067-606770439204444

+6281281903288 contact me via whatsapp and i will share to you twrp file

tembokbesi said:
+6281281903288 contact me via whatsapp and i will share to you twrp file
Click to expand...
Click to collapse
OK at this point Ill try anything. I have my cell totally unlocked OEM an Bootloader an still have just a fastboot screen an little else no matter what I try and do.
I use whatsapp. Not sure how to add you or contact you through it?
The only thing i used it for was sending info to my boss
---------- Post added at 01:44 PM ---------- Previous post was at 01:43 PM ----------
Bryceicle1971 said:
OK at this point Ill try anything. I have my cell totally unlocked OEM an Bootloader an still have just a fastboot screen an little else no matter what I try and do.
I use whatsapp. Not sure how to add you or contact you through it?
The only thing i used it for was sending info to my boss
Click to expand...
Click to collapse
Edit: just found out how to add you

I already download twrp wait I share after some time

Any Twrp or EDL rom? Currently stuck in bootloop.