Hi i have s6 g920f after downgrad 7.0 to 6.0.1
2 problèmes
1 screen look type not work
2 wifi password no save
A try flash phone smart switch same problem
h best said:
Hi i have s6 g920f after downgrad 7.0 to 6.0.1
2 problèmes
1 screen look type not work
2 wifi password no save
A try flash phone smart switch same problem
Click to expand...
Click to collapse
After you flash 6.0.1 firmware make wipe data/factory reset from recovery, then all functions should work well
Yes wip data everything same
Related
Hello guys,
I tried to install "CRISSCROSS GOES MARSHMALLOW V7.0" rom in my G925F but I forgot what my model number is. All I know is that my phone is G925 (S6 edge international).
Now my phone keeps on rebooting at the Samsung welcome page.
Also, I tried to install a stock rom using odin but that failed too (apparently, you can't go to an older software version)
Please help if you can.
hi there . iam new to note 5 . i have a SM-N920P SPRINT NOTE 5 my device was working fine until I've flashed it with a wrong rom . now the phone is not working its showing on screen ( an error has occurred while updating the device software . use the emergency recovery function in the smart swich pc software ) so as shown on my screen I've downloaded smart switch and connected my phone but it is now showing on smart switch in order to recovery it's software . so moved on to sammobile and downloaded latest firmware ( N920PVPU2BPH9_N920PSPT2BPH9_SPR ) and flashed it via odin but it fails showing this error on phone screen [sw rev check fail binary: 3 device: 2] . I've tried 3 more roms from different sites and all failed with different errors showing . I've saw a video on youtube and the youtuber said that the baseband version is matching with the phone baseband . pleas help me to fix my phone . sorry for the bad english language because its not my nature language . thanks
kirkuk said:
hi there . iam new to note 5 . i have a SM-N920P SPRINT NOTE 5 my device was working fine until I've flashed it with a wrong rom . now the phone is not working its showing on screen ( an error has occurred while updating the device software . use the emergency recovery function in the smart swich pc software ) so as shown on my screen I've downloaded smart switch and connected my phone but it is now showing on smart switch in order to recovery it's software . so moved on to sammobile and downloaded latest firmware ( N920PVPU2BPH9_N920PSPT2BPH9_SPR ) and flashed it via odin but it fails showing this error on phone screen [sw rev check fail binary: 3 device: 2] . I've tried 3 more roms from different sites and all failed with different errors showing . I've saw a video on youtube and the youtuber said that the baseband version is matching with the phone baseband . pleas help me to fix my phone . sorry for the bad english language because its not my nature language . thanks
Click to expand...
Click to collapse
Try with 4part rom or smart switch
SM-N920F cihazımdan Tapatalk kullanılarak gönderildi
Y4HY4 said:
Try with 4part rom or smart switch
SM-N920F cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
i've tried smart switch its not detecting my phone . i hope u provide me the 4part rom links if you have one . thanks
kirkuk said:
hi there . iam new to note 5 . i have a SM-N920P SPRINT NOTE 5 my device was working fine until I've flashed it with a wrong rom . now the phone is not working its showing on screen ( an error has occurred while updating the device software . use the emergency recovery function in the smart swich pc software ) so as shown on my screen I've downloaded smart switch and connected my phone but it is now showing on smart switch in order to recovery it's software . so moved on to sammobile and downloaded latest firmware ( N920PVPU2BPH9_N920PSPT2BPH9_SPR ) and flashed it via odin but it fails showing this error on phone screen [sw rev check fail binary: 3 device: 2] . I've tried 3 more roms from different sites and all failed with different errors showing . I've saw a video on youtube and the youtuber said that the baseband version is matching with the phone baseband . pleas help me to fix my phone . sorry for the bad english language because its not my nature language . thanks
Click to expand...
Click to collapse
try download your firmware using this software.
http://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
you need .net 3.5 to be install on your pc.
put your model as SM-N920P and region SPR. Tick the binary nature, check crc and decrypt automatically. it will download your firmware. then try flash with odin.
edan1979 said:
try download your firmware using this software.
http://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
you need .net 3.5 to be install on your pc.
put your model as SM-N920P and region SPR. Tick the binary nature, check crc and decrypt automatically. it will download your firmware. then try flash with odin.
Click to expand...
Click to collapse
thanks bro i've solved that error and my phone booted successfully by flashing this rom ( N920P_N920PVPS3BPJ2_SPRINT_USA_v6.0.1 ) from this link https://www.mediafire.com/folder/byye3kocz6nn4/Stock Roms Note 5 thanks to all of u .
probably FRP ON
I am on 9208 s7 port. I am having the same issue while downgrading to lollipop
djfran10 said:
probably FRP ON
Click to expand...
Click to collapse
FRP was off bro .
amit.deuskar said:
I am on 9208 s7 port. I am having the same issue while downgrading to lollipop
Click to expand...
Click to collapse
u cannot downgrade to lollipop u should flash same version of installed android or newer version . thats probably because of locked bootloader .
Its not FRP issue. Actually Samsung has implemented security on new firmwares and now we cannot install old firmwares anymore. As I installed:
N920IDVU3BPL2 firmware from Sammobile, so now I am just able to install one previous firmware ie: N920IDVU3BPJ2 and other than this I cannot install any firmware of Marshmallow or Lollipop at all.
If I still try to install any firmware I get [sw rev check fail binary: 3 device: 2] error.
My problem is that the new firmware is not working good and I cannot use my phone on LTE and even 3G is not goos at times so I am helpless at this stage. I think if I try my old modem of "N920IDVU2BPG3" firmware then may be I get LTE because this was the last perfect firmware working on my phone.
ODIN is throwing error so I think may be flashing the modem and bootloader via twrp may work but do not know if it will cause damage and also do not know how to make flashable zip of twrp for modem and bootloader.
Samsung has really messed me up and I hate it. From last one week the phone is not good on data.
Hey Guys. I've a very big problem. i flashed again two weeks to my original s5 mini stockfirmware 5.1.1 the stock firmware (full package) of marshmallow. All works fine, i dont wiped data because all was working. last night the phone doesnt wont anymore to register into the provider network. ive rebooted the phone but it doesnt help.
steps i've tried:
- reflash marshmallow stock
- reflash modem with different version: https://forum.xda-developers.com/galaxy-s5-mini/general/baseband-sm-g800f-t3354355
- flashed cm13
- flashed lollipop back (but this have failed on flash via odin, so i flashed again the marshmallow).
- cleaned the sim slot (the sim card works fine on another phone, another sim doesnt works with the s5mini)
- checked the sim slot pins (adjusted them for perfect contact)
i dont think its a softwareproblem of marshmallow because it had run for two weeks very fine.
any ideas?
hope for help
greetings from austria
Have you tried setting it in 2G mode only, this is a very common problem with the S5 mini. It stop working in 3G and 4G , but everything ok in 2G ( but at the 2G speed )
Envoyé de mon iPad en utilisant Tapatalk
lop1 said:
Have you tried setting it in 2G mode only, this is a very common problem with the S5 mini. It stop working in 3G and 4G , but everything ok in 2G ( but at the 2G speed )
Envoyé de mon iPad en utilisant Tapatalk
Click to expand...
Click to collapse
Hi. Yes i tried this but doesnt helped.
Greetings
I auto rooted my with cf auto root using odin and worked but when my son got to it he said he cut off usb debugging and the phone turned off and now it says custom binary blocked by frp lock plz help
Use Odin to reinstall a stock firmware and start all over
cachanilla86 said:
Use Odin to reinstall a stock firmware and start all over
Click to expand...
Click to collapse
Problem with that is I got the phone from rent a center the note 5 phones they got are international and I don't which firmware they used I thought Is was ins ver but to my surprise it wasn't now a big triangle is on the front when I boot my screen tell me to use sam switch or kies3 but when I tried that the phone aint supported so basically I need the stock rom nougat 7.0 N920GDDU3CQG3 for n920g
princ3v4lli4nt said:
Problem with that is I got the phone from rent a center the note 5 phones they got are international and I don't which firmware they used I thought Is was ins ver but to my surprise it wasn't now a big triangle is on the front when I boot my screen tell me to use sam switch or kies3 but when I tried that the phone aint supported so basically I need the stock rom nougat 7.0 N920GDDU3CQG3 for n920g
Click to expand...
Click to collapse
go to sammobile and get your firmware
tucking fypo said:
go to sammobile and get your firmware
Click to expand...
Click to collapse
sam mobile didn't have my firm I tried the one that almost matched mines and it made it worse
Hey guys i have Galaxy S6 SM-G920T running android 6.0.1 but i want to update it to nougat,so when i try to update there's no response from update option I even used Smart Switch to manually update it but it dosent works either. When i checked my device status in settings it said CUSTOM however in download mode it says everything is stock & official. I can use Odin to flash latest firmware but iam afraid that then device will get sim locked and other carriers wont work on it. Please Help me guys if i use Odin to flash stock nougat firmware then will i lose my signals? or there's any other way of updating it? HELP PLEASE