Database Develop

have any one experienced this !

you know the only us port in the kaiser where you charge and where you connect it to the pc. when you first buy the kaiser it would be wonderful then couple months later ..it becomeshappy and doesn't work as good. it starts either rocking or the "teeth" inside start to move that will cause problems with connections and charging.
same thing happened to me with my universal so I threw it away ..but I love this kaiser I have what would be another alternate solution ? please I would appreciate your help.

Yes this is fairly common with this phone. Normally service is suggested.
Warranty FTW!

Just be careful when your plugging and unplugging the device. i.e. take it out and put it in straight, not at any angles.
If you search broken miniusb you'll find several threads. One is of mine when it broke. It was charging in the car and dropped and the "male" part of the extusb on the phone cracked.
I went to an At&t service center, the guy looked at it, told me its frequent and handed me a new device.

that's the problem ...I bought it over ebay

Here ya go...
http://www.ppctechs.com/AT-T-Tilt_974/repairs/Sync-Connector-Repair-Service_633-373.htm

oh wow..thanks man!
I was looking all over the place and not near me..
I never thought that at&t might have a technical support department..
but that's wonderful.
I know it's a little expensive but i't worth it when you can't live without your ppc.

Ninlour said:
oh wow..thanks man!
I was looking all over the place and not near me..
I never thought that at&t might have a technical support department..
but that's wonderful.
I know it's a little expensive but i't worth it when you can't live without your ppc.
Click to expand...
Click to collapse
<< Plug alert >>
PPC-Techs is not AT&T technical support, but I highly recommend them. I have used their screen protectors on my devices since my Ipaq 1900. Their customer serices is excellent.

I just had the mini usb replaced on my Tilt by PPCTechs. HTC wanted over $350 to repair. PPCTech was about $75. Excellent service and high speed.
www.ppctechs.com

thank you sooo much guys ...I'm probably going to look for the HTC Universal and send it to those guys too!

IMEI, mother- and daughter board.

Hi,
I'm about to buy me a new Android phone but I have some questions about this one that I have been using - because I thought it would be fun to change and try some things with it and know what I'm doing.
[story]If you're wondering why I'm buying a new one, well the reason is because something went wrong with the motherboard. I'm pretty sure it's the motherboard because my touch screen is not responding and I know it isn't the touch screen, because the screen works fine when I change it with another G1.
So, basically I think that the problem is inside the phone. Recently I found out that I was using a "fake" charger. I never knew. So, every time I used the G1 with the charger the chin heated. This is why I think the touch doesn't work because something got heaten/broken inside were the cables connect @ the motherboard.[/story]
Anyways, my real question is about IMEI.
Does the "mother-board" (the mainboard) holds all the information such as the IMEI (that I have unlocked at the very start)? Or is the IMEI-info being hold somewhere else? Maybe the so-called daughter-board (the one in the chin)?
I read on these forums it's stored on some cable (underneath the camera)?
Thanks in advance.

Please do explain, WTF is a "fake charger"?
You really mean "fake"? Or do you mean DEFECTIVE?
G1-Amateur said:
Hi,
I'm about to buy me a new Android phone but I have some questions about this one that I have been using - because I thought it would be fun to change and try some things with it and know what I'm doing.
[story]If you're wondering why I'm buying a new one, well the reason is because something went wrong with the motherboard. I'm pretty sure it's the motherboard because my touch screen is not responding and I know it isn't the touch screen, because the screen works fine when I change it with another G1.
So, basically I think that the problem is inside the phone. Recently I found out that I was using a "fake" charger. I never knew. So, every time I used the G1 with the charger the chin heated. This is why I think the touch doesn't work because something got heaten/broken inside were the cables connect @ the motherboard.[/story]
Anyways, my real question is about IMEI.
Does the "mother-board" (the mainboard) holds all the information such as the IMEI (that I have unlocked at the very start)? Or is the IMEI-info being hold somewhere else? Maybe the so-called daughter-board (the one in the chin)?
I read on these forums it's stored on some cable (underneath the camera)?
Thanks in advance.
Click to expand...
Click to collapse

dhkr123 said:
Please do explain, WTF is a "fake charger"?
You really mean "fake"? Or do you mean DEFECTIVE?
Click to expand...
Click to collapse
Fake
~1. One that is not authentic or genuine; a sham.
I checked my charger and I noticed it isn't branded, such like Nokia, Samsung, etc... And I tried to charge another G1 with the same HTC and I noticed the chin heats up. With the genuine charger the chin does not heat up. I know I have to watch out for "fake" stuff, but I didn't check if my charger was genuine, because I trusted the seller.

I have a genuine charger for my G1 and it's chin also heats up. It's a flaw of the phone, not the charger. (or maybe a flaw of the genuine charger but idk) I do know that the chin heating up is normal.

raydar670 said:
I have a genuine charger for my G1 and it's chin also heats up. It's a flaw of the phone, not the charger. (or maybe a flaw of the genuine charger but idk) I do know that the chin heating up is normal.
Click to expand...
Click to collapse
It's remarkeable because I have this other G1 and yeah it does heat up, but this one heats up really bad. It's really hot, not just "warm". I really think it's the result of using this "fake" charger (for over 6 months) why my touch isn't responding.

Dropped captivate, screen had purple spots, then black :(

Hello
I recently dropped my Samsung Captivate. First time it had purple spots on the screen in 1 day the whole screen went purple and the next day the whole screen went black The sensor and everything else is working.
How do you think, what may be the issue of this? is the screen completely screwed or there may be another, less important damage.

Lejolasho said:
Hello
I recently dropped my Samsung Captivate. First time it had purple spots on the screen in 1 day the whole screen went purple and the next day the whole screen went black The sensor and everything else is working.
How do you think, what may be the issue of this? is the screen completely screwed or there may be another, less important damage.
Click to expand...
Click to collapse
My guess is that you'll have to replace the digitaliser. You can do it yourself or contact mobiletechvideos.com for the job.
If you have any experience in it though, you can try opening your phone and see if anything isn't correctly connected.

BWolf56 said:
My guess is that you'll have to replace the digitaliser. You can do it yourself or contact mobiletechvideos.com for the job.
If you have any experience in it though, you can try opening your phone and see if anything isn't correctly connected.
Click to expand...
Click to collapse
did you mean the whole lcd?

Pretty sure it would be easier to replace the digitizer + screen, since I think they're glued together on the captivate? (correct me if I'm wrong).
It's about $75. http://www.ebay.com/itm/Samsung-Cap...izer-i896-AT-T-Galaxy-S-Display-/160787040070

Lejolasho said:
did you mean the whole lcd?
Click to expand...
Click to collapse
x0ne215 said:
Pretty sure it would be easier to replace the digitizer + screen, since I think they're glued together on the captivate? (correct me if I'm wrong).
It's about $75. http://www.ebay.com/itm/Samsung-Cap...izer-i896-AT-T-Galaxy-S-Display-/160787040070
Click to expand...
Click to collapse
You would have to replace both, yes.

BWolf56 said:
You would have to replace both, yes.
Click to expand...
Click to collapse
At the cost of replace them both i can buy a captivate in better condition i did hope, that there could be another issue. thank you guys.

You can...? Please shoot me a link...haha .

x0ne215 said:
You can...? Please shoot me a link...haha .
Click to expand...
Click to collapse
Yeah, I'd like to grab a spare if they are sitting that cheap now.
Sent from my SGH-I897 using xda app-developers app

As far as I've seen, the cheapest I got mine was $80. Bad idea, too many issues, wasted money. Buying anywhere but swappa they're about 150$+. Swappa has one for $135 (hoping to buy that one actually, but either have to wait a week and hope someone doesn't buy it, or sell my pantech crossover faster so I have the money haha).

x0ne215 said:
As far as I've seen, the cheapest I got mine was $80. Bad idea, too many issues, wasted money. Buying anywhere but swappa they're about 150$+. Swappa has one for $135 (hoping to buy that one actually, but either have to wait a week and hope someone doesn't buy it, or sell my pantech crossover faster so I have the money haha).
Click to expand...
Click to collapse
You just have to put "i897" or similar as an ebay saved search that notifies you when new products matching that description are posted.
I bought 1 cappy for $60 from ebay seller alltechwholesale, out of Texas I think. In my experience, they do a good job inspecting the phones first so you know what your going to get. In my experience and many others, the phone arrived in better condition than described....Then I picked up two more sold together on ebay for $70 that were listed as one bad digitizer and the other bad charge port. I got them as parts phones. The one with the "bad digitizer" ended up being just a bad search button because the screen lifted on that corner a little. A 50 cent tube of adhesive fixed that. Then the second of the two just had a dirty charge port and a squirt of crc electronics cleaner fixed it...Now I have a main phone, a backup flashed to be identical, and a media device!!
After taking this phone completely apart a few times it gets pretty easy to see it really is a mini computer and most of the major parts can be bought on ebay for decent prices and replaced fairly easy....The ribbons that connect the various parts can bend and break easily so that is something to keep in mind. I broke the ribbon for the headphone jack assembly but a little hunting on ebay and I had one on it's way for $1.50 after shipping lol.

rmntruexjr said:
You just have to put "i897" or similar as an ebay saved search that notifies you when new products matching that description are posted.
I bought 1 cappy for $60 from ebay seller alltechwholesale, out of Texas I think. In my experience, they do a good job inspecting the phones first so you know what your going to get. In my experience and many others, the phone arrived in better condition than described....Then I picked up two more sold together on ebay for $70 that were listed as one bad digitizer and the other bad charge port. I got them as parts phones. The one with the "bad digitizer" ended up being just a bad search button because the screen lifted on that corner a little. A 50 cent tube of adhesive fixed that. Then the second of the two just had a dirty charge port and a squirt of crc electronics cleaner fixed it...Now I have a main phone, a backup flashed to be identical, and a media device!!
After taking this phone completely apart a few times it gets pretty easy to see it really is a mini computer and most of the major parts can be bought on ebay for decent prices and replaced fairly easy....The ribbons that connect the various parts can bend and break easily so that is something to keep in mind. I broke the ribbon for the headphone jack assembly but a little hunting on ebay and I had one on it's way for $1.50 after shipping lol.
Click to expand...
Click to collapse
Haha yes, I can relate to the mini computer aspect. Just spent my day repairing about 8 hp Touchsmarts, the cappy compared to that, is a dream lmao. Much less to deal with . I planned on using the cappy I have now as a spare part phone anyway, unless I can somehow get it to work. But I didn't know about the whole ebay thing. I shall do that now, thanks a TON :fingers-crossed:
EDIT: Just checked alltechwholesale ebay store, SO MANY CAPPYS FOR SALE!!! All around the same price, seems they put it up for 0.99 and someone keeps jacking it up to $70 shortly after. My only thing -- I hate auctions . But great share and bookmarked

x0ne215 said:
Haha yes, I can relate to the mini computer aspect. Just spent my day repairing about 8 hp Touchsmarts, the cappy compared to that, is a dream lmao. Much less to deal with . I planned on using the cappy I have now as a spare part phone anyway, unless I can somehow get it to work. But I didn't know about the whole ebay thing. I shall do that now, thanks a TON :fingers-crossed:
EDIT: Just checked alltechwholesale ebay store, SO MANY CAPPYS FOR SALE!!! All around the same price, seems they put it up for 0.99 and someone keeps jacking it up to $70 shortly after. My only thing -- I hate auctions . But great share and bookmarked
Click to expand...
Click to collapse
yeah, alltech is just auctions but I just took time to read conditions and saved a bunch and you'll find that they go for different prices depending on what's wrong and even depending on the day or time of day lol......That's why I suggested saving the search too. I use the ebay app and when there is new listings of my saved searches I get a notification so I go and look. If your quick, You can possibly snag a "buy it now" at a decent price depending on the condition your looking for. I really couldn't believe I ended up with 3 100% working phones and maybe I just got lucky, but I'd say it's worth a try lol.

I'd say it was a combination of good research, and amazing luck hahaha. But I do appreciate it a lot, thanks for the info, cheers

Lejolasho said:
At the cost of replace them both i can buy a captivate in better condition i did hope, that there could be another issue. thank you guys.
Click to expand...
Click to collapse
Sorry we kind of got off the subject, But for the digitizer try what Bwolf said about the connections.
Once when I was testing the power button I soldered on my old cappy I didn't get one of the ribbons all the way on (i believe it was the ribbon near the power button), and the screen flashed a few different colors.
There is at least one probably more youtube vids with pointers on how to get the cappy apart in a way that wont do damage.

I know there's a tare-down guide here, and there was a YouTube video where someone replaced the screen, if I can find it on my history I'll edit this post

rmntruexjr said:
Sorry we kind of got off the subject, But for the digitizer try what Bwolf said about the connections.
Once when I was testing the power button I soldered on my old cappy I didn't get one of the ribbons all the way on (i believe it was the ribbon near the power button), and the screen flashed a few different colors.
There is at least one probably more youtube vids with pointers on how to get the cappy apart in a way that wont do damage.
Click to expand...
Click to collapse
i have checked and now i am sure, that the screen is broken. I live in a state, that is not supported by paypal and and where can i buy used captivate for parts with my credit card?

The only place I can think of would be ebay, if you can find a seller who accepts things other than paypal. Or you can try craigslist.

[Q] USB port problem

whenever i try to charge my note or connect it to pc it keeps lagging badly i mean i have to keep moving the cable backward for it to work and its very senstive with just the slightest move it will stop charging again ! what do i do ? do i have to change it ? i really don't drop my note or anything i try to take care of it as much as possible and changing it might be a problem for me since y parents wont agree ! any help ?

Well i do think that you'll have to change it. the charging port seems to be very problematic for the note. And almost all the note users here with the same problem have replaced the port. i guess it'll be done for free if the phone is in warranty. I'd like the other users to tell me the approx cost of the replacement.

Varad297 said:
Well i do think that you'll have to change it. the charging port seems to be very problematic for the note. And almost all the note users here with the same problem have replaced the port. i guess it'll be done for free if the phone is in warranty. I'd like the other users to tell me the approx cost of the replacement.
Click to expand...
Click to collapse
many thanks to you ^^ yah me too its true that i am under warranty but just in case they refused to do it how much will it cost ?

I have this problem and I fixed it by using a real samsung original usb cable. this problem is evident when i use cheap after market usb cables. the cheap cables seem to loosen up and their contact pins inside wear out. this is when you will have that charging problem.

If you have any mechanical abilities, it takes about 15 minutes to replace. Many youtube videos on how to do it.
Port isn't expensive, maybe 10 dollars (us), plus shipping. Just insure you get the correct one for your model of
phone.

One thing I would take care of is to take care of who you buy it from if you do so on ebay. I replaced mine and it's incompatible in some way, speaker now doesn't work and signal is terrible.
Make sure you search their sold items for feedback saying it works fine. I was reading through a thread for SGS2 USB strip replacements and mingxing2008008 was a recommended seller for that one, maybe they're reliable in general

Phone not recognized by PC and it says device has malfunctioned

Hi guys. I recently used a questionable charger with my phone (leeco le 2 x526) and since then it has been problem after problem with the USB port. Immediately after that charge, the phone stopped charging with the supplied quick charging brick. It won't even charge slowly. The phone behaves like the charger is being plugged in and out about five times and then completely stops as if the charger is no longer detected. However ,when I put it in a normal slow Samsung charger, it charges to the end without disconnecting.
It's not only the charging that's not working. A Windows PC I have connected the phone to before doesn't recognize it so mtp doesn't work. The PC says the device has malfunctioned and windows does not recognize it. Lately the phone has started rebooting randomly so it seems like I need to fix it soon.
Also, when I plug in headphones using the 3.5mm dongle, I hear crackling sounds for the first few seconds and Jack detection doesn't work sometimes until I reboot. Sounds play okay when it's detected. The microphone and media control buttons on headset have stopped working and I hear static when I press the buttons on my headset, sometimes it's quiet.
I'm pretty sure the USB board is the one that's damaged but want to know if anyone else has faced this issue. If it's the USB+mic board that's damaged I'll order one on AliExpress. I found it for like 8 bucks.
I'm thinking I have a hardware failure because since it started acting up, I tried to flash a ROM clean and got an error in TWRP. The flashing finished but I saw a red error message:
Code:
rcv error in uevent
I googled and this error occurs when the kernel fails to initialize a hardware component.
Has anyone experienced the same problem? I don't want to replace the board without a second opinion.

I believe that you are definitely on the right track with the replacing board, this same exact issue happened to me once on my first Leeco X727. In my case I was lucky enough that Amazon agreed to exchange it for a new phone. Without a doubt, many Le Pro 3 owners have seen this exact issue. Your questionable charger possibly shorted out the USB card.
I would strongly suggest that you replace the battery, while you are at it, it will also be very cheap.
You will need to use a Heat gun to remove the display without damaging the LCD, there are many videos on youtube that demonstrate the quick sweeping technique and the glue will easily release enough that the screen will come off simply by turning the phone onto its face side.
While you can also use a hairdryer, you will need to run a guitar pick along the edge of the screen to remove the display and it's very easy to damage the LCD...I did! Consequently, I bought a heat gun at harbor freight for $ 7 dollars, to easily the display on a friends X720.
Good Luck.
PS : Did you receive your Le Pro 3 yet?

tsongming said:
I believe that you are definitely on the right track with the replacing board, this same exact issue happened to me once on my first Leeco X727. In my case I was lucky enough that Amazon agreed to exchange it for a new phone. Without a doubt, many Le Pro 3 owners have seen this exact issue. Your questionable charger possibly shorted out the USB card.
I would strongly suggest that you replace the battery, while you are at it, it will also be very cheap.
You will need to use a Heat gun to remove the display without damaging the LCD, there are many videos on youtube that demonstrate the quick sweeping technique and the glue will easily release enough that the screen will come off simply by turning the phone onto its face side.
While you can also use a hairdryer, you will need to run a guitar pick along the edge of the screen to remove the display and it's very easy to damage the LCD...I did! Consequently, I bought a heat gun at harbor freight for $ 7 dollars, to easily the display on a friends X720.
Good Luck.
PS : Did you receive your Le Pro 3 yet?
Click to expand...
Click to collapse
Thank you so much for this advice. I will replace this board and see if it solves the problem. About the heat gun, I don't know if I will use it much after this repair so I'll take the phone to my friend who has a repair shop to change it for me.
One quick question... Is there a high possibility of damaging the battery during this repair? I don't want to replace it if I don't have to because mine is still pretty good and keeps like a new one. I don't have much luck with AliExpress because the original batteries for Le 2 cost almost $150 to ship. The rebranded batteries cost less to ship (~$10) but I don't know which one is reliable.
My Le pro 3 is still in transit. I reckon it's still about 2 weeks away because shipping takes very long to my country. I'm just now going through the various development threads to find a good ROM for it. Thanks again -- you're a godsend ???.

twistyplain said:
Thank you so much for this advice. I will replace this board and see if it solves the problem. About the heat gun, I don't know if I will use it much after this repair so I'll take the phone to my friend who has a repair shop to change it for me.
One quick question... Is there a high possibility of damaging the battery during this repair? I don't want to replace it if I don't have to because mine is still pretty good and keeps like a new one. I don't have much luck with AliExpress because the original batteries for Le 2 cost almost $150 to ship. The rebranded batteries cost less to ship (~$10) but I don't know which one is reliable.
My Le pro 3 is still in transit. I reckon it's still about 2 weeks away because shipping takes very long to my country. I'm just now going through the various development threads to find a good ROM for it. Thanks again -- you're a godsend .
Click to expand...
Click to collapse
No problem.
The battery is underneath the heat shield so it will not be affected by the heat gun.
Attached are pictures of my LeEco Pro 3 with and without the main heat shield...On the far left
https://dl.xda-developers.com/thumbs/4/7/3/9/9/6/8/4739968.jpg
( Ignore the writing, I combined those photos for a solder repair suggestion in a unrelated post)
Edit: Opps, that link didn't work to well, here is the actual post link with better quality photos.
https://forum.xda-developers.com/showpost.php?p=79303956&postcount=72

tsongming said:
No problem.
The battery is underneath the heat shield so it will not be affected by the heat gun.
Attached are pictures of my LeEco Pro 3 with and without the main heat shield...On the far left
https://dl.xda-developers.com/thumbs/4/7/3/9/9/6/8/4739968.jpg
( Ignore the writing, I combined those photos for a solder repair suggestion in a unrelated post)
Edit: Opps, that link didn't work to well, here is the actual post link with better quality photos.
https://forum.xda-developers.com/showpost.php?p=79303956&postcount=72
Click to expand...
Click to collapse
I flashed a ROM from 4pda and totally messed the phone up. That ROM failed to boot and to make matters worse, it formatted my data partition. Everything is gone including my backups and I cannot transfer a new OS to the phone because my USB port doesn't work. The only thing I can do now is to shelve this phone until the replacement USB board arrives. You have been of great help and I appreciate it extremely. I'm using a feature phone now until my pro 3 comes. To use any Android app I have to share my wife's phone which just sucks. (She barely puts the damn thing down)

twistyplain said:
I flashed a ROM from 4pda and totally messed the phone up. That ROM failed to boot and to make matters worse, it formatted my data partition. Everything is gone including my backups and I cannot transfer a new OS to the phone because my USB port doesn't work. The only thing I can do now is to shelve this phone until the replacement USB board arrives. You have been of great help and I appreciate it extremely. I'm using a feature phone now until my pro 3 comes. To use any Android app I have to share my wife's phone which just sucks. (She barely puts the damn thing down)
Click to expand...
Click to collapse
No doubt we never realize how much we rely on these devices until they are gone.
You will definitely love the Le Pro 3, it is much more powerful, and the camera is phenomenal.

tsongming said:
No doubt we never realize how much we rely on these devices until they are gone.
You will definitely love the Le Pro 3, it is much more powerful, and the camera is phenomenal.
Click to expand...
Click to collapse
Absolutely true. I have a new found appreciation for my phone. Now that I think about it, with the time I spend on it I think some digital detox is in order.

I received the USB board from AliExpress but it is incompatible with x526. Anybody with information on where I can get a board for x526 please share it here. All USB boards on AliExpress are for x620 and they can't work on x526.
I am actually thinking about looking for the x526 board in India because that's where the phone was built for. I just haven't figured out how to go about it. But I reckon there is a lot more need for spare parts there because of the high number of people using the phone.

twistyplain said:
I received the USB board from AliExpress but it is incompatible with x526. Anybody with information on where I can get a board for x526 please share it here. All USB boards on AliExpress are for x620 and they can't work on x526.
I am actually thinking about looking for the x526 board in India because that's where the phone was built for. I just haven't figured out how to go about it. But I reckon there is a lot more need for spare parts there because of the high number of people using the phone.
Click to expand...
Click to collapse
X620 and x526 are quite different. These two phones share the same case, battery and LCD screen, nothing else.
Here is a link to buy a usb board for x52x:
US $8.99 10%OFF | Used Original USB Plug Charge Board For Letv LeEco Le 2 X520 X526 free shipping
https://s.click.aliexpress.com/e/e9YBAJQ

alqi said:
X620 and x526 are quite different. These two phones share the same case, battery and LCD screen, nothing else.
Here is a link to buy a usb board for x52x:
US $8.99 10%OFF | Used Original USB Plug Charge Board For Letv LeEco Le 2 X520 X526 free shipping
https://s.click.aliexpress.com/e/e9YBAJQ
Click to expand...
Click to collapse
My le 2 is finally back to full working condition thanks to you. This USB board doesn't look used at all. The best part is that mtp and fast charging are working again.