I'm stuck on booting after rooting my device - SuperSU

I've Got a Huawei p10 and after a rooting attempt my device stuck on the booting screen and says: your device is booting now...
Please help:crying:

SnakeX020 said:
I've Got a Huawei p10 and after a rooting attempt my device stuck on the booting screen and says: your device is booting now...
Please help:crying:
Click to expand...
Click to collapse
Your phone isnt dead at all, it's just a softbrick which maybe be cause by alteration of system files.. switch it off, and hold down a combination of keys that will boot your phone into recovery mode, and wipe all data..but before that make sure you create a backup of your device or dont if you have it on your google account. And for Huawei i think the right combination of keys is to hold down both volume buttons + Power button until it boots you into recovery mode..or you can just flash a stock rom of your phone.
hint: google how to boot huawei p10 into recovery mode

Related

TWRP Doesn't boot.

I have tried to flash TWRP 3.0.2-6 for A7000-a by HDHR and it clearly said A7000-a. But it just hangs at logo and never boot to recovery.
Does anyone already have a solution?
Try to go to TWRP recovery mode by pressing volume up+volume down+power key. If you get the recovery mode try wiping data. Maybe it will work
When I post this thread, my phone was kinda bricked, and I was using this hardware key method.
By the way, is A7000-a and A7000 Plus the same device?

Infinite bootloop Huawei P10

Recently i'm just update the Huawei android version, but after restarted the phone, it's keep stuck on the manufacturer logo, unable boot into the main screen.
I did try to press Volume key + and Power unfortunately unable to enter the recovery mode, please help.
Send it to service
If you haven't unlocked the bootloader/installed TWRP/Rooted, then yes I'd agree with the above comment and send to service.
Otherwise follow the instructions here.... https://forum.xda-developers.com/p10/help/tutorial-recovering-p10-p10-brick-t3600211
amonev said:
Send it to service
Click to expand...
Click to collapse
I'd asked the service center but they said will wipe my data, is there anyway to retrieve the data back?
Just for understanding: Did you unlock your Bootloader?
Jannomag said:
Just for understanding: Did you unlock your Bootloader?
Click to expand...
Click to collapse
No, i didnt unlock bootloader.
Did someone managed to fix that? I have same problem.
I used hisuite to install pie update on my p10 and it started bootlooping.
Button combinations for fastboot, factory reset etc dont work, cant even shut down phone unless disconecting battery from the motherboard.
i have the same problem, i didn't do anything it just happened and now i don't know what do, please help
sayfsami said:
i have the same problem, i didn't do anything it just happened and now i don't know what do, please help
Click to expand...
Click to collapse
Have you tried to do Factory Reset and/or (re)Install latest firmware and recovery from eRecovery (switch off, conncect to charger, keep pressing Vol+ and then boot by Pow)
zgfg said:
Have you tried to do Factory Reset and/or (re)Install latest firmware and recovery from eRecovery (switch off, conncect to charger, keep pressing Vol+ and then boot by Pow)
Click to expand...
Click to collapse
i can't access recovery mode, the phone keeps boot looping until the battery is drained, i tried to access recovery mode with the boutons combination to do a factory reset but i can't access it, it doesn't work, the phone stays stuck in the boot loop, i actually don't know how to install the firmware i didn't find it.
once the phone has some power it starts booting and rebooting until the battery is drained, when i plug it it starts booting and rebooting on it's own.
sayfsami said:
i can't access recovery mode, the phone keeps boot looping until the battery is drained, i tried to access recovery mode with the boutons combination to do a factory reset but i can't access it, it doesn't work, the phone stays stuck in the boot loop, i actually don't know how to install the firmware i didn't find it.
once the phone has some power it starts booting and rebooting until the battery is drained, when i plug it it starts booting and rebooting on it's own.
Click to expand...
Click to collapse
eRecovery is different from Recovery (I wrote above the phone to be connected to charger while booting with Vol+ kept pressing; in Recovery there is no option for Installing the latest - but the option is present in eRecovery), but anyway, you probably cannot boot to eRecovery either ;(
It could be also possible to reinstall firmware from HiSuite but you could not connect if you cannot boot
For flashing from Fastboot, you must have Bootloader and FRP unlocked (but to unlock, you must first boot to the system)- if I understood correctly, you didn't play with Bootloader, Fastboot, flashing, etc yet, hence your FRP and BL are locked
Uhm can anyone help me? pls. I unlocked my bootloader and flashed open kirin AEX P1 Beta and it caused me bootloop maybe because I fail to factory reset the second time or at least can I reflash the custom rom to make it work again but I can't access my p10 on fastboot

Can't enter recovery mode after installing TWRP

Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
Are you on EMUI 5 (Android Nougat) ? If so, official TWRP is not compatible with version > EMUI 4.x for now.
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
ClementNerma said:
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
Click to expand...
Click to collapse
you need install original recovery and extract update.app from B100 firmware, then you place it to "dload" folder in your sd card and flash using 3 buttons. you cant full brick by messing with root. only soft brick which is fixable.
Ok I'll try it. I will post again if something comes wrong.
Thanks a lot for your help
I forgot to ask about one thing : I'm owning a phone with NEM-L51 model and I don't know if I can use NEM-L22 firmware ? If I can't, where can I find the right files to downgrade this specific model ? All the firmware files I see on the web are for the NEM-L22...
EDIT : I've found the B102 firmware for NEM-L51 model (Europe + UK) can I take it for the downgrade or is the B100 specific version needed ?
ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
gopinaidu77 said:
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
Click to expand...
Click to collapse
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears. This is really strange, when I see videos I find on YouTube all Honor 5C owners that just do what you say enter in recovery mode, but it's not my case... I really wonder why.
I don't know if that can help you to understand, but I'm using a french Honor 5C phone, with EMUI 5.0 / Android Nougat like I said previously, model is NEM-L51 and I did the Android Nougat update several days ago using the Honor's official update application, which is natively installed on the phone.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
ClementNerma said:
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
Click to expand...
Click to collapse
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
gopinaidu77 said:
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
Click to expand...
Click to collapse
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video of when I boot my phone in normal mode / recovery mode / erecovery mode ?
ClementNerma said:
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video ?
Click to expand...
Click to collapse
No i understood
gopinaidu77 said:
No i understood
Click to expand...
Click to collapse
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
EDIT : I forgot to precise the long model name of my phone : NEM-L51C432B350. On Firmware Finder Rewrite it shows that there are only two update packages for it, published on 20.04.2017... So I wonder if I need to download the three files shown in the filelist of the big update (1.68 Gb) and install them on the device ?
ClementNerma said:
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
Click to expand...
Click to collapse
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
gopinaidu77 said:
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
Click to expand...
Click to collapse
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
ClementNerma said:
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
Click to expand...
Click to collapse
Yes that's fine.
gopinaidu77 said:
Yes that's fine.
Click to expand...
Click to collapse
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
ClementNerma said:
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
Click to expand...
Click to collapse
Long click of power button will shut down the phone. Why u always refer about usb cable . Follow all instructions unplugged
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
gopinaidu77 said:
Long click of power button will shut down the phone.
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
Click to expand...
Click to collapse
Nope, long click of power button will just reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
ClementNerma said:
Nope, long click of power button will hust reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
Click to expand...
Click to collapse
Yes , the same happend for me ! U can unbrick bro
gopinaidu77 said:
Yes , the same happend for me ! U can unbrick bro
Click to expand...
Click to collapse
But how can I unbrick the phone ? I can't enter in any mode, I can't connect it to PC, I can't shutdown the phone, I can't use ADB or FastBoot on it, I can't reflash the bootloader or install a TWRP, downgrade or boot normally, I can't do anything !
So how could I unbrick it ? For now it's just still displaying "Your device is booting now..."
If you know how to do, please tell me so I can unbrick my phone. Sorry for asking you so many things I don't understand myself why there are so many problems...

Huawei P10 Bricked (Can only use TWRP)

Hello friends,
So I've had the misfortune of bricking my P10 by installing TWRP then doing a huawei firmware update by accident. I presume because I have custom recovery it didnt go through and now I basically have a very expensive TWRP device lol
Phone doesnt boot into system, so it boots into TWRP.
Can't get it into any other mode for some reason (bootloader mode etc.), I really could only get it there from a power-off mode, but it wont stay powered off from TWRP, just reboots itself.
So now it's pretty much always stuck on TWRP. Can anyone help please?
VTR-AL00 model, was on the B141 firmware before update...
Thank you for reading
silencerxo said:
Hello friends,
So I've had the misfortune of bricking my P10 by installing TWRP then doing a huawei firmware update by accident. I presume because I have custom recovery it didnt go through and now I basically have a very expensive TWRP device lol
Phone doesnt boot into system, so it boots into TWRP.
Can't get it into any other mode for some reason (bootloader mode etc.), I really could only get it there from a power-off mode, but it wont stay powered off from TWRP, just reboots itself.
So now it's pretty much always stuck on TWRP. Can anyone help please?
VTR-AL00 model, was on the B141 firmware before update...
Thank you for reading
Click to expand...
Click to collapse
To reboot in bootloader try this :
-Unplugg the phone from the computer
-Power it off
-When powered off, push vol down button and plug the phone to the computer (while holding vol down button)
-It will normally go in bootloader mode.
christrodr said:
To reboot in bootloader try this :
-Unplugg the phone from the computer
-Power it off
-When powered off, push vol down button and plug the phone to the computer (while holding vol down button)
-It will normally go in bootloader mode.
Click to expand...
Click to collapse
Thank you,
I was trying to do it without plugging it in.
I managed to flash a recovery.img and a boot.img extracted from some (older) firmware from some Russian site and it booted like a charm.
Thank you

Bootloop stuck

So my phone just got bootloop stuck, After I flash using ADB ( last option because other flash app won't work ), it is Stop at super then my pc accidentally blue screen, So when I turn on my phone, I got bootloop, I can't Go to fastboot, Bootrom, But I can go to recovery ( Cant Use The menu ) idk why, My volume only work when I want to go recovery, but won't work when I was in recovery, I can't go fastboot, or bootrom, can someone help me? My recovery won't work, Only Power Button work, Volume button won't work,I'll try to change volume button flexible,still the same
Bad grammar lmao
You can visit the Xiaomi certified technician and flash the device all back into stock. Well, no one is responsible for your bricked device and that your host device experienced a crash while flashing the critical partitions. I'm not sure how you managed to get the bootloader messed up it can't boot into the fastboot.
try using SP Flash Tool, it helped me today to restore atleast fastboot

Categories

Resources