Upgrade NZ VIE-L09C706B300 - Solved - Huawei P9 Plus Questions & Answers

Using the Team MT Firmware finder I can see that Android 7 update is available in NZ however for a limited few it would seem. If I use the "Check Firmware Access" tool with in the firmware finder app it states the firmware isn't approved.
I've downloaded any way to my SD and attempted to install. After 37% progress if fails and reboots.
I have extracted the following from the recovery log.
========Module name:VENDOR,module ID:00000013 ========
[2017-09-18 20:56:51 175] cmd_unit_write_begin_func,line=492: dwMagicNum :A55AAA55
[2017-09-18 20:56:51 175] cmd_unit_write_begin_func,line=493: szDispName :VENDOR
[2017-09-18 20:56:51 175] cmd_unit_write_begin_func,line=494: UnlockCode :HW7x27ÿÿ
[2017-09-18 20:56:51 175] cmd_unit_write_begin_func,line=495: dwDataStartAddr :0x00000013
[2017-09-18 20:56:51 175] cmd_unit_write_begin_func,line=496: dwDataLen :0x20107B28
[2017-09-18 20:56:51 175] cmd_unit_write_begin_func,line=497: dwBlockSize_hw :0x00
[2017-09-18 20:56:51 175] cmd_unit_write_begin_func,line=498: dwBlockSize :0x1000
[2017-09-18 20:56:51 175] get_part_property,line=2213: Finding: VENDOR,0x00000013
[2017-09-18 20:56:51 175] get_part_property,line=2253: common table Find by Name : 0x00000013, VENDOR
[2017-09-18 20:56:51 175] get_part_property,line=2213: Finding: CACHE,0x50000000
[2017-09-18 20:56:51 175] get_part_property,line=2253: common table Find by Name : 0x50000000, CACHE
[2017-09-18 20:56:51 175] cmd_unit_write_begin_func,line=590: module_offset_in_emmc_or_nand : 0xd0000000
[2017-09-18 20:56:51 175] one_write_pre_write_func,line=862: Pre Write VENDOR ...
[2017-09-18 20:56:51 175] one_write_pre_write_func,line=870: VENDOR can not update separatly
[2017-09-18 20:56:51 175] dload_update_file,line=572: push SD_WRITE_BEGIN_FAIL_L4
[2017-09-18 20:56:51 175] dload_update_file,line=574: cmd_unit_write_begin_func failure
[2017-09-18 20:56:51 175] update_package_list,line=1811: Error:checking /sdcard/dload/UPDATE.APP
int hw_ensure_path_unmounted(const char*),666,path:/sdcard
[2017-09-18 20:56:51 427] update_sd_update,line=1978: update from extern card fail
[2017-09-18 20:56:51 427] boolean update_process(ptr_share_parag),line=434: factory_sd_update,update func fail:1
[2017-09-18 20:56:51 427] UPDATE_RESULT default_update_postfunc(ptr_share_parag),line=272: pls implement it,curr_cmdnull)
[2017-09-18 20:56:51 427] boolean update_process(ptr_share_parag),line=439: factory_sd_update,post func fail:1
[2017-09-18 20:56:51 427] int dload_main(int, char**),line=558: curr_parag.last_result:1
[2017-09-18 20:56:51 427] int dload_main(int, char**),line=638: go to end(1)....
[2017-09-18 20:56:51 427] hw_resize_userdata_get_flag (flag=)
[2017-09-18 20:56:51 427] mkdir /cache 0755 failed
[2017-09-18 20:56:51 444] hw_resize_userdata_get_flag (flag=)
E:Error in /dload/update_huawei_dload.zip
(Status 1)
Does anyone have any idea whats going on here. I think the key to the issue is in these two lines but I'm unsure whats going on here:
[2017-09-18 20:56:51 175] one_write_pre_write_func,line=870: VENDOR can not update separatly
[2017-09-18 20:56:51 175] dload_update_file,line=572: push SD_WRITE_BEGIN_FAIL_L4

there is a way around the "firmware isn't approved" issue.
check xda forum.

I couldnt get it work either, on spark, so i just unlocked bootloader, installed twrp, and flashed all 3 files through twrp, and amazingly bootloader was locked again, not relocked, but locked..

I was able to get this to install in the end.
I used the Proxy method to download and install using the Huawei System Update tool however if I click on update/download it would state download failed. I had to go to the menu button at the bottom of the screen and select Download latest full Package.
The XDA forum search tool is crap. I took Masze's unhelpful advise and searched and found no real result. I eneded up using google to search and came up with one forum using this search string:
site:https://forum.xda-developers.com Team MT firmware finder "the firmware is not approved"
That search string, at the time, provided one result.
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146/page48
Here are the instructions from the above link for installing using the proxy method however i left the proxy settings in place during the whole upgrade.
Quote:
Originally Posted by @Retutal
READ ALL OF THIS BEFORE DOING
Okay..first open Firmware Finder ..go to settings..enable install by proxy...install the addon...after that open the addon..
now go back to Firmware Finder and Look for the OTA u like.. Select it then press SEND FIRMWARE TO UPDATER..
you will be brought back to the addon app..do as you are told.. wifi>[select wifi network of choice/long press]>modify>show advanced options>proxy set to MANUAL> set name to localhost >set port to 8080>ignore bypass proxy>save/connect...go to ur updater app (in your settings that checks for updates)
once the update pops up , go back to wifi, set proxy to NONE>save/connect..
Go back to Updater and START DOWNLOADING the update..make sure ur device is charged once it finishes...
*BTW I'd rather you download the FULL-OTA instead of the regular OTA... and also, if you plan on switching and upgrading Android versions/ EMUI versions, install the FULL-OTA-PV / OTA-PV first, then the latest OTA for that android version..
There! Hope I helped.
Notify me if ur having problems.

moodie007 said:
Notify me if ur having problems.
Click to expand...
Click to collapse
Can @moodie007 or anyone else expand on those instructions?
For example, a more useful set of instructions could look something like this. - but this set of steps is both incomplete and incorrect. It's just an example of the kind of detail that would be useful.
1. Download the firmware updater tool to your Windows PC.
2. Run the firmware updater tool.
3. (Do something with proxy)
4. On your phone choose settings, about phone. Note the model number / build number, which is EVA-L09. Note that that "EVA-L09" isn't an option in the app - EVA-L09C02 or C09 are in there, as is EVA-L9C900 which is my current firmware version, but it's unclear what to use.
5. On the main tab, hit "range setting". Search or scroll down to your phone model - eg EVA-L09C900. In the "G Range" and "g range" fields enter xyz
6. Hit the left button, which is a circle with a greater than sign in it
7. Change your PC IP address to 81.177.139.39 . This makes your phone on your wifi network look at the Firmware Finder software running on your PC as a proxy, which lets it download the firmware even if the IMEI says it shouldn't.
8. On your phone check for updates.
Right now the instructions above are just about impossible to follow. The documentation for the tool is terrible - ie these isn't any that I can find.

commandonz said:
Can @moodie007 or anyone else expand on those instructions?
For example, a more useful set of instructions could look something like this. - but this set of steps is both incomplete and incorrect. It's just an example of the kind of detail that would be useful.
1. Download the firmware updater tool to your Windows PC.
2. Run the firmware updater tool.
3. (Do something with proxy)
4. On your phone choose settings, about phone. Note the model number / build number, which is EVA-L09. Note that that "EVA-L09" isn't an option in the app - EVA-L09C02 or C09 are in there, as is EVA-L9C900 which is my current firmware version, but it's unclear what to use.
5. On the main tab, hit "range setting". Search or scroll down to your phone model - eg EVA-L09C900. In the "G Range" and "g range" fields enter xyz
6. Hit the left button, which is a circle with a greater than sign in it
7. Change your PC IP address to 81.177.139.39 . This makes your phone on your wifi network look at the Firmware Finder software running on your PC as a proxy, which lets it download the firmware even if the IMEI says it shouldn't.
8. On your phone check for updates.
Right now the instructions above are just about impossible to follow. The documentation for the tool is terrible - ie these isn't any that I can find.
Click to expand...
Click to collapse
1/ Download Firmware Finder on your phone. You do not need a PC to do any of this. Just a wireless internet connection.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder&hl=en
2/ open Firmware Finder. Go to settings. Enable install by proxy. When you enable it will prompt you to install the addon. Open the addon after installing but then close.
4/ now go back to Firmware Finder and Look for the OTA Update. Select it then press SEND FIRMWARE TO UPDATER.
you will be brought back to the addon app.
5/ Go to phones wifi settings, select wifi network of choice/long press]>modify>show advanced options>proxy set to MANUAL> set name to localhost >set port to 8080>ignore bypass proxy>save/connect...
6/ go to ur updater app (in your settings that checks for updates). If you try and update it should show the b300 version. If you try to install it may fail. Click on the menu at the bottom of the screen and select Download Latest Full package.

Related

Unlock Bootloader, Convert L23 to L21 and upgrade to Android 6 Official & Custom

Huawei P8 Lite - Unlock Bootloader, Convert L23 to L21 and upgrade to Android 6 Official & Custom - (October 30, 2016).
IMPORTANT!
This tutorial describes the steps and necessary order to update the Huawei P8 Lite L23 or L21 to a newer version of Android. All in one tutorial to walk not looking separately each step is explained as much as I practice possible, if still do not achieve good for Re-Lean and try it as many times as necessary or ask if flat can not, if no then go for a beer and tacos, relax and try again later.
If you do not feel ready or deplano have not the foggiest idea of ​​what arises in this best Tutorial leave your cell like this, if you also have your phone you used to what is necessary as well leave it, dedicate to research terms you do not understand Moreover, do not try to "run without first learning to walk," you're not coming back Millionnaire, or you're going back more handsome, strong, and you will be the most intelligent or interesting, or you will become immortal only by Update your phone to Android in June , so be patient, be aware and do not hasten. At the precise moment you decide to continue with this tutorial, you become absolutely responsible for what happens to your phone and your actions. Please proceed with caution and do not play the chingon.
ODYSSEY BEGINS HERE!
UNLOCK BOOTLOADER
You can get the code to unlock the Bootloader in the following ways:
Following in the footsteps of EloyGomez Video Tutorial:
PD: Add a "w" to download.
https://ww.youtube.com/watch?v=AVmAEQjOnNQ
Following the Steps of taking screenshots and a previous orientation with EloyGomez Video:
https://plus.google.com/u/0/photos/+JohnMillerDev7/albums/6305181114976401569
Using "Huawei Product ID Generator" and following the instructions (I recommend you go copying data from a notebook and save them, you never know when you can return to need):
Download "Huawei Product ID Generator" extract it where they like and run. (It is a very simple little program).
Product Model: HUAWEI Y300-0000 (selecionan that model).
Product IMEI / MEID: "Here put your IMEI / MEID".
Product ID: "Here Product ID generates them automatically according to product model & product IMEI / MEID previously placed, and which must wear on the page"
Enter the page to Unlock Bootloader Huawei, Whether the version in English or Chinese, the only thing that changes is the language. They can try with 2 pages.
Create an account so that they can log in, they can also log in with Facebook, it is very simple.
Once you have created your account and logged in, we see the page for the unlock code.
Fill the fields with the data that we requested and put the following:
Product type: Smartphone
Product model: HUAWEI Y300-0000 (If you do not work with this, try with all models that are in the generator) (Also try with CAPITALS & lowercase).
Product Serial number: They get in Settings> About phone> Status> Serial Number.
Product IMEI: They get in Settings> About phone> Status> IMEI.
Product ID: They get the "Huawei Product ID Generator" (The program that generated them a while ago).
Captcha place the page requesting them and pressed Send or Submit, you must give the unlock code for Bootloader, copy it into the notebook (which I suppose must carry).
Now Turn to Settings> About Phone and Pulsen several times on "Compilation" until muentre them the message "now are a developer" Returning to Settings and you will see the option "Developer" tab, go there, if they are not active options because the activated developer, now a little move down and activate "USB debugging".
Download the "UNLOCK HUAWEI BOOTLOADER" extract it where they like, then connect your phone to the PC and run "UNLOCK BOOTLOADER.bat" program.
And the rest is a cinch, just follow the instructions anger us indicating the program, Drivers ADB & HiSuite (At most only have to accept the terms, click next and finish) were installed, the phone will restart a few sometimes they do not worry or despair pANIC not normal will reboot.
When they unlocked the Bootloader can disconnect your phone from the PC on and off.
Now let's check that everything went well, keep pressed "Vol-" while we connect to the PC, you will see a white screen with some letters (that's the Fastboot mode), and if they see the text "PHONE UNLOCKED" because Congratulations, Make unlocked the bootloader correctly.
Hechate a beer, a soft drink, Pau-Pau or commits a loaf to celebrate, but do not get too excited because it only been the beginning, we still some way to go, but certainly this is the most important step of all, because without having the unlocked Bootloader is not at all advisable to make root the phone, install a recovery or install a custom ROM, those using KingRoot arise after them so rare mistakes and to get them to damage the phone.
OFFICIAL FOR HUAWEI UNLOCK CODE BOOTLOADER:
https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
HUAWEI OFFICIAL VERSION IN CHINA FOR UNLOCK CODE BOOTLOADER:
PD: Add a "w" to see the website.
https://ww.emui.com/plugin.php?id=unlock&mod=detail
TOOLS YOU NEED TO DOWNLOAD:
Bootloader unlock huawei:
https://mega.nz/#!uRkC2DQS!R2IMpEpUAtrDH4-Gi4VLi8Mcz5_h98jtKsBATpMBQYg
Huawei Generator Product ID:
https://mega.nz/#!eE81BbrT!_JBTy1ZCdFuYd7JwFLnaQe06I47ua__hEa4GHx6PZvM
If the PC does not recognize them the phone even after the program to automatically install the ADB drivers, then download, extract and install these, is not all that complicated should only connect your phone to the PC.
Run programs just follow the instructions and go. May need to click on Next, Finish, "Y" or "ENTER".
https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
CONVERT L21 To L23
(If you reached this step means that are already Pros .... hahaha Wes is not true, it is believed!, Read on!)
At this point what we will do first is to install the TWRP Recovery and make full Wipes in order to erase the system and leave the phone in white to make a much cleaner installation without errors. So we follow the following instructions:
PD: You can install the TWRP who like V2 or V3, the procedures are the same, just change a bit the interface.
Instructions for both versions:
Download TWRP INSTALL RECOVERY (V2 or V3) P8 HUAWEI LITE.rar
Download adb-setup-1.4.3.rar
Unzip adb-setup-1.4.3.rar and run the program. (This is for adb drivers and pc can detect the terminal is installed.)
We will see a blue screen console Type "and" or "accept" in everything and close the window. If you ask them to restart the pc, do it and go.
Begin your phone in Fastboot mode; Turn off the phone and press the "VOL" key and without releasing conectenlo to the PC until Fastboot screen appears.
Unzip "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI LITE.rar P8" and execute the file "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI LITE.bat P8" and follow the steps.
Do not take more than 5 minutes is just a matter of going press ENTER.
Turn off the phone and Start TWRP Recovery Mode (Vol + & Power) Click on WIPE, Advanced Wipe and make full wipes:
Should be marked:
Dalvik
Cache
Data
Internal storage
System
IMPORTANT !: not marques "micro sdcard".
Return to Menu, press Reboot, and then Bootloader.
Files:
TWRP V2:
https://mega.nz/#!SZkzlQCb!iKBl1-6arjT6_9exrp9sc2aVzp7NnuKxECz6MVJ_Oms
TWRP V3:
https://mega.nz/#!CZ91RQSA!B_kl3YPn7H38nbyG-5bVk2yt6qGDSsu3A2cnGysj7u4
ADB:
https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
After you have successfully done this, we continue to spend our L23 to L21 P8 Lite, I recommend removing your SD card and SIM Card precaution. We follow the instructions:
Downloading "FlashRom C432B052 (Lollipop 5.0, 3.1 EMUI) Dual Sim Transition" extract it where they like, Begin your phone in Fastboot mode, connect it to PC, execute the "FLASH-ALL.bat" file (not execute permissions administrator), and follow the instructions that tells the program.
You complete the process when the phone is started with the new system, if you are targeting "About phone" say "Balong". To remove that must be installed Step2.
Downloading "Step2", extract it, look for the "UPDATE.APP" file and copy it to the "DLOAD" your SD card folder if you do not have then created. (Clearly it must first insert the SD on the phone).
Then head to Settings> Updater> Menu> Update Local and selecionan the UPDATE.APP (Step2). The phone will reboot, start the installation and wait for it to finish. When you start the system and check the "About phone" no longer tell Balong but L21.
After this I recommend doing a factory reset, first remove your SD card, then go to "Settings> Security> Backup and Restore" or type in the search bar settings "Backup and Restore" click "Factory Data Reset "mark" Delete memory ", press" Reset "and wait to finish the process. If for some reason out "Failed" do not worry just restart, anyway there will reset the cel, also do not worry if you have no signal or you will not detect the SIM, that is fixed by installing the following update.
Congratulations you get past your cel L21!
Files:
FlashRom C432B052:
https://mega.nz/#!LQNimCgQ!oq2C_Gwvwv7zoigo8GR2kstPdHDO5ESJ9Qglv_2UERs
Step2:
https://mega.nz/#!vdsDEZSb!3FIgh6WNgP4NWRfnGoDxisd1wAQk3CBPKdKl8_If-v0
UPDATED ANDROID 6 Official
The update command is as follows: "B052> B170> B560> B564" or "B052> B170> B550> B560> B564"
(Compiling B560 is the most stable so far).
Being in the B052 just have to download the following Compilaciones and be updated locally via:
"B170> B560> B564" or "B170> B550> B560> B564". I recommend that for every update they make, do a factory reset to eivtar errors, this is optional in the end, I just do them the recommendation from experience.
The B170 downloaded, extract the files, copy the DLOAD UPDATE.APP folder on your SD, head to Settings> Updater> Menu> Update Local and selecionan the UPDATE.APP, the phone restarts, start the installation and wait end.
Now being in the B170, repeat the previous step to install the B550 or B560 Compilation. (Depending on the order above mentioned update, they work better or decide to take)
Now when they are on the B560 turn to the B564 but no longer appear the option "Update Local", so there are 2 options to perform the update: (and must have the UPDATE: APP previously copied to the DLOAD, the update.app always be copied to Dload no other):
Option 1:
Type the following code in the app called "* # * # 2846579 # * # *" ​​(without quotes obviously).
Appear the famous hidden menu, click "Software Upgrade"> "SDCard Upgrade"> will leave them a message "Are you Sure" (are you sure?), Pressed OK, start the update and wait for it to finish.
Option 2:
Cel being off or on, press the (Vol-, Vol +, Power) aperezca keys until the update screen and wait to finish the process.
And that would be all, Congratulations and cell habras updated to Android in June!
If you get here it means you're half Pro.
Official Roms (Installation Via Local):
PD: Add "http:" extension links to download.
B170:
//download-c.huawei.com/download/downloadCenter?downloadId=57325&version=181091&siteCode=fi
B550:
//download-c.huawei.com/download/downloadCenter?downloadId=78426&version=312720&siteCode=es
B560:
//download-c.huawei.com/download/downloadCenter?downloadId=80469&version=319382&siteCode=pl
https://mega.nz/#!uRNRDRaA!zavgQtBakqdg_lbXmgoKwB7qotPoXOJvJofvnPlM1CI
B564:
https://mega.nz/#!aAVhkbgI!1cGtLB0HxQN0x-KeyB2MqQ3JWeGEnvD2aKll7vsCa60
UPDATED CUSTOM ROM ANDROID 6
Just click on the link, read the post and go following the instructions that you indicate. Patience and Success!
PD: Add "http" "://" "w" to see the website.
[TUTORIAL] Install Android B560 & B564 6 (Dual Sim) Custom Rom V2 - Sokkoban - (Updated July 18, 2016)
ww.htcmania.com/showthread.php?t=1188059
Rom ROM Spectre - Android 6 B560 (Dual Sim) - POST UPDATED (26 AUGUST 2016)
ww.htcmania.com/showthread.php?t=1200900
Rom ROM Phenom - Android 6 B564 (Dual Sim) - POST UPDATED (26 August 2016)
ww.htcmania.com/showthread.php?t=1220243
Rom ROM Opteron - Android 6 B574 (Dual Sim) - POST UPDATED (26 AUGUST 2016)
ww.htcmania.com/showthread.php?t=1218158
Nautilus Android ROM Rom 6 B564 (Dual Sim) - October 13, 2016
ww.htcmania.com/showthread.php?t=1241126
Rom ROM Helios - 6 B890 EMUI Android 4.1 (Dual Sim) - October 25, 2016.
ww.htcmania.com/showthread.php?t=1245909
DRIVERS EXTRAS
Here I leave some Drivers Extras to troubleshoot issues fastboot, adb, if the PC does not detect the Cell, the installation of each is very simple, just keep connected your cel to the PC, run programs, you must give "next" and then restart the PC if necessary.
Files:
https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
And that's all I hope I have been clear and supported with this Tutorial.
Greetings from Coatzacoalcos, Veracruz, Mexico! :fingers-crossed:

Huawei P8 Lite Unlock Bootloader, Convert L23 In L21, Upgrade To Android 6 Official +

# SUPPORT HUAWEI P8 LITE
Huawei P8 Lite Unlock Bootloader, Convert L23 In L21, Upgrade To Android 6 Official + Install Custom Roms, Recoverys, Rootear, And Many Many Things - April 27, 2017 Updated.
IMPORTANT! This Tutorial describes the steps and order needed to Update the Huawei P8 Lite L23 or L21 to a newer version of Android. Everything in a single tutorial so that they are not looking for each step separately, It is explained as practical as possible, even if they do not do it well. Re-read and try it as many times as necessary or ask if they can not, if not As they go for a beer and tacos, they relax and try again later.
If you do not feel ready or deplaned you do not have the slightest idea of ​​what is posed in this tutorial better leave your cell phone like this, if you have your cell phone you use for the necessary so leave it, dedicate yourself to investigate terms that you do not understand Even, do not try to "run without first learning to walk", you are not going to return Millionaire, nor are you going to become more handsome, strong, nor will you be the most intelligent or interesting, nor will you return immortal solo by Update your phone to Android 6 , So be patient, be aware and do not accelerate. At the moment you decide to continue with this Tutorial, you become absolutely responsible for what happens with your Mobile and your actions. Please proceed with caution and do not play chingon.
HERE THE ODYSEA BEGINS!
<<< UNLOCK BOOTLOADER >>>
IMPORTANT:
To know the Model Number & IMEI:
Enter Settings> About Phone.
To Know the Serial Number:
Enter Settings> About Phone> Status
To Know Product ID:
Enter this code: "* # * # 1357946 # * # *" ​​on the telephone dial (without quotes), the number that appears, is the PRODUCT ID.
You can Obtain the Code to unlock the Bootloader in the following ways:
Following in the footsteps of EloyGomez Video Tutorial:
Https://www.youtube.com/watch?v=AVmAEQjOnNQ
---------------------------------------------------------------------------------------------------------
Following the Steps of the Screenshots having already a previous orientation with the Video of EloyGomez:
Https://plus.google.com/u/0/photos/+JohnMillerDev7/albums/6305181114976401569
Using "Huawei Product ID Generator", and following the instructions (I recommend copying the data obtained in a notebook and saving them, you never know when you may need them again):
Download "Huawei Product ID Generator", extract it wherever you like and run it. (It's a very simple program).
Product Model: HUAWEI Y300-0000 (select that model).
Product IMEI / MEID: "Here they place their IMEI / MEID".
Product ID: "Here you generate the Product ID automatically according to the Product model & product IMEI / MEID that they placed above, and it is the one they should use on the page"
Go to the Huawei page to unlock Bootloader, either the English version or the Chinese version, the only thing that changes is the language. You can try with all 2 pages.
They create an account so they can log in, they can also log in with Facebook, it's very simple.
Once you have created your account and logged in, we will see the page to obtain the unlock code.
Fill in the fields with the data that we are requested and we will put the following:
Product type: Smartphone
Product model: HUAWEI Y300-0000 (If it does not work for them, try all the models that are in the generator) (Also try with CAPITAL & lowercase).
Product Serial number: You get it in Settings> About Phone> Status> Serial Number.
Product IMEI: You get it in Settings> About Phone> Status> IMEI.
Product ID: They get it with the "Huawei Product ID Generator" (the one that generated the program a while ago).
They place the Captcha that asks them for the page and they press Submit or Submit, they must give them the Code of Unlock for the Bootloader, they copy it in the scrapbook (that I suppose they must take).
Now go to Settings> About Phone and click on "Compilation" several times until the message "now you are a developer" is muted, you return to Settings and you will see the "Developer Options" tab, enter there, if the options are not active Of developer because they activate them, now they move a little down and activate "Depuracion USB".
Download the program "UNLOCK BOOTLOADER HUAWEI", Extract where you like, then connect your phone to the PC and run "UNLOCK THE BOOTLOADER.bat".
Already the rest is eaten, just follow the instructions that will indicate the program, the ADB & HiSuite Drivers will be installed (At most, they will only have to accept the terms, press next and finish), the Telephone will restart a few Sometimes do not worry or despair do not panic, it will be normal to restart.
When they have unlocked the Bootloader they can disconnect the Phone from the PC and turn it off.
Now let's check that everything went well, we kept pressing "Vol-" and at the same time we connected it to the PC, they will see a white screen with some letters (that is the Fastboot mode), and if they see the text "PHONE UNLOCKED" Congratulations, you have unlocked the bootloader correctly.
Make a beer, a soda, a Pau-Pau or Commit a Bread to celebrate, but do not get so excited because this is only the beginning, we still have a way to go, but certainly This is the most important step of all, Since without having the Bootloader unlocked it is not at all advisable to make Root to the phone, to install a recovery or to install a custom Rom, Those that use KingRoot for that after that they appear rare errors to them and even it damages them the telephone.
---------------------------------------------------------------------------------------------------------
OFFICIAL HUAWEI PAGE TO OBTAIN THE BOOTLOADER UNLOCK CODE:
Https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
OFFICIAL PAGE OF HUAWEI IN CHINESE VERSION TO OBTAIN THE BOOTLOADER UNLOCK CODE:
Https://www.emui.com/plugin.php?id=unlock&mod=detail
TOOLS YOU SHOULD DOWNLOAD:
Unlock bootloader huawei: https://mega.nz/#!uRkC2DQS!R2IMpEpUAtrDH4-Gi4VLi8Mcz5_h98jtKsBATpMBQYg
Huawei Product ID Generator: https://mega.nz/#!eE81BbrT!_JBTy1ZCdFuYd7JwFLnaQe06I47ua__hEa4GHx6PZvM
If the PC does not recognize the phone even after the program installs the ADB Drivers automatically, then download, extract and install these, it is not at all complicated just connect your phone to the pc.
Run the programs just follow the instructions and you're done. You may have to press Next, Finish, "Y" or "ENTER".
Https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
---------------------------------------------------------------------------------------------------------
<<< CONVERT L23 IN L21 >>>
(If they already reached this step means that they are already Pros .... hahahaha not true, they believed it!, Keep reading!)
At this point what we will do first is to install the Recovery TWRP and make the Wipes Complete with the purpose of Erase the system and leave the Phone blank to make a Installation much Cleaner and without possible errors. To do this we follow the following instructions:
PS: They can install the Twrp that like V2 or V3, the procedures are the same, only slightly changes the interface.
Instructions for both versions:
Download INSTALAR RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.rar
Download adb-setup-1.4.3.rar
Unzip adb-setup-1.4.3.rar and run the program. (This is to install adb drivers and the pc can detect the terminal.)
You will see a blue console screen, type "and" or "accept" at all and close the window. If you ask them to restart the pc, do it and that's it.
Start your Phone in Fastboot mode; Switch off the phone and press the "vol-" key and without releasing it connect it to the PC until the Fastboot screen appears.
Unzip "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.rar" and execute the file "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.bat" and follow the steps.
It will not take more than 5 minutes just to press ENTER.
Turn off Cell Phone and Start in Recovery Mode TWRP (Vol + & Power), Press WIPE, Advanced Wipe and make the complete wipes:
You must dial:
Dalvik
Cache
Data
Internal storage
System
IMPORTANT !: Do not check "micro sdcard".
Go back to Menu, press Reboot, and then Bootloader.
Files:
TWRP V2:
Https://mega.nz/#!SZkzlQCb!iKBl1-6arjT6_9exrp9sc2aVzp7NnuKxECz6MVJ_Oms
TWRP V3:
Https://mega.nz/#!CZ91RQSA!B_kl3YPn7H38nbyG-5bVk2yt6qGDSsu3A2cnGysj7u4
ADB:
Https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Once the above is done correctly, we continue to move our P8 Lite L23 to L21, I recommend you remove your SD Card and SIM Card as a precaution. Follow the instructions:
Download "FlashRom C432B052 (Lollipop 5.0, EMUI 3.1) Dual Sim Transition", extract it wherever you like, start your phone in Fastboot mode, connect it to the PC, execute the file "FLASH-ALL.bat" (do not execute it with permissions Administrator), and follow the instructions given to you by the program.
When the process ends, the phone will start with the new system, if you go to "About the phone" it will say "Balong". To remove that you must install Step2.
Download "Step2", extract it, look for the file "UPDATE.APP" and copy it to the "DLOAD" folder of your SD Card, if you do not have it then create it. (It is clear that you must first insert the SD into the phone).
Then go to Settings> Updater> Menu> Local Update and select the UPDATE.APP (Step2). The phone will restart, the installation will begin and wait for it to finish. When you start the system and check in "About the phone" you will no longer say Balong, but L21.
After this it is recommended to do a factory reset, first remove your SD card, then go to "Settings> Security> Backup and Restore" or type in the search bar of "Backup and Restore" settings, press "Reset factory data "Check" Clear internal memory ", click on" Reset "and wait for the process to finish. If for some reason "Failed" does not worry, it only restarts, the cell will have been reset anyway, do not worry if you do not have a signal or it does not detect the SIM, that is fixed by installing the next update.
Congratulations, you've already passed your cel to L21!
Files:
FlashRom C432B052: https://mega.nz/#!LQNimCgQ!oq2C_Gwvwv7zoigo8GR2kstPdHDO5ESJ9Qglv_2UERs
Step2: https://mega.nz/#!vdsDEZSb!3FIgh6WNgP4NWRfnGoDxisd1wAQk3CBPKdKl8_If-v0
---------------------------------------------------------------------------------------------------------
<<< UPDATE ANDROID 6 OFFICIAL >>>
The update order is as follows: "B052> B560> B564> B574> B584> B594> B596> B598> or" B552> B570> B560> B560> B564> B574> B584> B594> B596> B598 ".
Being already in the B052 we only have to download the following Compilations and go updating via local:
"B552> B570> B560> B564> B594> B594> B594> B596> B598 'or' B552> B570> B560> I recommend that for every update they make, make a factory reset to avoid possible errors, this is optional after all, I only make the recommendation from their own experience.
Download the B170, extract the files, Copy the UPDATE.APP to the DLOAD folder of your SD, go to Settings> Updater> Menu> Local Update and select the UPDATE.APP, the phone will restart, the installation will begin and wait for To finish.
Now on the B170, Repeat the previous step to install the B550 or B560 Compilation. (Depending on the order of updating mentioned above, that works best for them or decide to take)
Now when they are in the B560 we go to the B564 but the option of "Local Update" will no longer appear, so we have 2 options to carry out the update: (they should already have the UPDATE: APP previously copied in the DLOAD, The update.app is always due to copying to Dload there is no other):
Option 1:
Write the following code in the calls app "* # * # 2846579 # * # *" ​​(without quotes obviously).
The famous hidden menu will appear, click on "Software Upgrade"> "SDCard Upgrade"> you will receive an "Are you Sure" message, press OK, start the update and wait for it to finish.
Option 2:
While the Cel is off or on, press the keys (Vol-, Vol +, Power) until you see the update screen and wait for the process to finish.
And that would be Todo, Felicidades ya habras updated Your phone to Android 6!
If you've already come up here means you're half Pro.
Official Roms (Local Via Installation):
ALE-L21C432B170
Https://mega.nz/#!eYUgxbrb!yccoxiIsXjIHdiGxdP6AU05S1fYQGNNMRba427BxEgs
ALE-L21C432B550
Http://download-c.huawei.com/download/downloadCenter?downloadId=78426&version=312720&siteCode=en
ALE-L21C432B560
Http://download-c.huawei.com/download/downloadCenter?downloadId=80469&version=319382&sit eCode=pl
Https://mega.nz/#!uRNRDRaA!zavgQtBakqdg_lbXmgoKwB7qotPoXOJvJofvnPlM1CI
ALE-L21C432B564
Https://mega.nz/#!kJkESTKT!1cGtLB0HxQN0x-KeyB2MqQ3JWeGEnvD2aKll7vsCa60
ALE-L21C432B574 - 2016.07.19
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v56678/f1/full/update.zip
ALE-L21C432B580
Https://mega.nz/#!2RUgxKiI!c-RX4wJsilZuxEDFwWJ2lcO-tpC4J5Q3uGbHUo4c1Vw
ALE-L21C432B584 - 2016.11.21
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v67128/f1/full/update.zip
ALE-L21C432B586 - 2016.12.13
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v69882/f1/full/update.zip
ALE-L21C432B588 - 2016.12.26
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v72428/f1/full/update.zip
ALE-L21C432B594 - 2017.02.28
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v77344/f1/full/update.zip
ALE-L21C432B596 - 2017.03.28
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v80333/f1/full/update.zip
ALE-L21C432B598 - 2017.04.20
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v83472/f1/full/update.zip
---------------------------------------------------------------------------------------------------------
<<< INSTALL CUSTOM ROMS, RECOVERYS, ROOTEAR, AND MANY MORE THINGS >>>
I have compiled a collection of various interesting contributions to facilitate your search, so check it out!
Http://www.htcmania.com/showthread.php?t=1310020
*
<< DRIVERS EXTRAS >>
Here I leave some extra drivers to solve problems with issues of fastboot, adb, in case the PC does not detect the mobile, the installation of each is very simple, just keep your cell connected to the pc, run the programs, you have to Give it to "next" and restart the PC if necessary.
Files:
Https://mega.nz/F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
And that's it, I hope I was clear and supported with this Tutorial,
Greetings from Mordor!
---------------------------------------------------------------------------------------------------------
Empty
Im trying to use huawei product id generator but I always get this message in unlock page
I tried with c8812 and Y300-000 and all have the same results.
ALE-L21
Please make sure the verification code and model number are correct. If your device has multiple IMEIs or MEIDs, please try another IMEI or MEID.

Bricked p10, need help.

So I have a p10, and decided to see what i could do with it. Having little experience, I managed to get somewhere. Unlocked the bootloader, got twrp, installed it with the command fastboot flash recovery recovery.img and got:
target reported max download size of 471859200 bytes
sending 'recovery' (32034 KB)...
OKAY [ 1.012s]
writing 'recovery'...
OKAY [ 0.200s]
finished. total time: 1.222s
WOOT! Awesome! No problems! Then I issued: fastboot boot recovery.img
And got
downloading 'boot.img'...
OKAY [ 1.020s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 1.030s
WTF?!
So after a bit, I misread and flashed boot.img with: fastboot flash boot boot.img
I guess I flashed the wrong image. I dunno. But now it boots into the screen that tells me "Your device is unlocked and can'r be trusted" tells me its booting, reboots, goes to the same screen again, says its rebooting again, then brings me to Huawei eRecovery. I connect to my wifi network, telling it to download the latest version and recover, and it says "getting package info failed" So I ma stuck with a device that won't boot.
Oh yes, and down volume and power don't bring me to fastboot anymore.
Begging for help here please.
Do the whole rebranding to unbrick, not sure if you flashed wrong image on boot.
Advice: When flashing recovery boot it by powering off and using key combo. Or adb command. Not from fastboot as IMG.
I did a google search on rebranding to unbrick, and found a guide on the 9. So I assume its similar. It first tests me to boot into twrp. I can't. Twrp never got installed. The next step is to get the offical firmware and put it on the SD card. I can't find it. I am in Canada, and can't find any firmware for canada, nevermind anything north american. It is however possible I have found the wrong guide, as I don't really know what I am doing. As a complete noob, links to guides would be nice when possible and available when making recommendations.
The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.
smariob said:
The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.
Click to expand...
Click to collapse
okay, i know you are trying to be helpful, but I just can't follow it...
You said "Download Update ZIP. I suggest rebrand to VTR-L29 C432 !" Which one of them? Is the B just a build number, and I should get the latest? please remember, you are talking to a noob.
You talk about 3 files, update.zip, update_data_public.zip and update_all_hw.zip Do I need them all? If so the last one, where I change filelist.xml to all /cn/update_full_all_cn.zip doesn't work. See the following link http://update.hicloud.com:8180/TDS/.../v92067/f2/full/all/cn/update_full_all_cn.zip
Also, rename the file, "Where spcseas is the model of the file you are downoloading" Huh? I know I have to replace the word spcseas with something, but with that?
Now it says to run update.bat Whats the point? I have not been directed to plug the phone into the computer, and even if I did, the computer won't recognize it because I can't get it into any mode... Where do I put these files? They all go in the same directory? I just can't follow this guide as much as I try..
THERE IS GOOD NEWS HOWEVER!
I have been able to get it into TWRP! This means I can get into fastboot, which means I can re-flash the correct boot.img, IF I can get my hands on it (and assuming that's the actual issue It likely is. It was working until I flashed this other boot.img file.). So if I can get direction on how to get it, I should be okay. Double triple and quadruple bonus points for just providing me a direct link to the boot.img file to use without having to play around trying to follow guides I can't seem to understand.
UPDATE!!
Now although I can get into TWRP, its hit and miss, but I can get there eventually, it will no longer boot into fastboot/recovery. When I click reboot, and choose bootloader in TWRP, it just freezes..
This is getting frustrating. Apparently getting into the bootloader is hit and miss, but i can do it.
Search for Huawei update extractor in order to get BOOT.IMG from update.app (inside update zip) I could upload one myself, but I'm not at home right now.
TWRP doesn't support reboot atm. You must power off completly. To boot to recovery press power on and vol + until huawei logo appears, then relase power. It should boot to recovery TWRP in this case.
For boot bootloader you press vol - when you are connecting usb cable to PC.
smariob said:
The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.
Click to expand...
Click to collapse
smariob said:
Search for Huawei update extractor in order to get BOOT.IMG from update.app (inside update zip) I could upload one myself, but I'm not at home right now.
TWRP doesn't support reboot atm. You must power off completly. To boot to recovery press power on and vol + until huawei logo appears, then relase power. It should boot to recovery TWRP in this case.
For boot bootloader you press vol - when you are connecting usb cable to PC.
Click to expand...
Click to collapse
Thats good to know. I was getting TWRP more often when I did it from off. What was happening was I would holds power and volume up, release power when the logo appeared, and MOST of the time I would boot into TWRP. Sometimes it would just reboot, I would continue to hold up, and it would either reboot, or boot into TWRP. Occasionally I would get the recovery that came with the phone ?!?!
In any event, I managed to get into TWRP, boot into recovery, extract the boot.img, flash it... AND IT WORKED! Phone booted!
So after all this, I backed up EVERYTHING I could using TWRP. The Boot partition, System partition, EVERYTHING! It kept failing on the Data partition, but from my research that wasn't that important anyway. I then installed SuperRoot_noverity_nocrypt.zip, rebooted, installed phh's SuperUser, installed Root Checker, and finally, I have root!!
Thank you so much for the help. About to go "thank clicking" for all the help you provided.

lld-al10 8.0.0.100c675 FULL-Update needed

have anyone this FULL-Update lld-al10 8.0.0.100c675 (or 8.0.0.1xx) available AND can upload ?
other user have bootloop AND on FirmwareFinder is only LLD-AL10C00... downloadable
JamesBott said:
have anyone this FULL-Update lld-al10 8.0.0.100c675 (or 8.0.0.1xx) available AND can upload ?
other user have bootloop AND on FirmwareFinder is only LLD-AL10C00... downloadable
Click to expand...
Click to collapse
Grazie Amico
Unfortunately there isn't a full firmware for c675 so far.
BS4388 said:
Unfortunately there isn't a full firmware for c675 so far.
Click to expand...
Click to collapse
I ask the whole community of XDA for help.
It is possible that there is no one who can have the same original firmware.
Thank you.
tonino65 said:
I ask the whole community of XDA for help.
It is possible that there is no one who can have the same original firmware.
Thank you.
Click to expand...
Click to collapse
Sto ancora cercando STOCK FIRMWARE TELEFONO BLOCCATO!!!!!!!!!!!!!!!!!! AIUTO
È possibile che non riesco a trovare un firmware originale per il mio HONOR 9 LITE
GRAZIE
JamesBott said:
have anyone this FULL-Update lld-al10 8.0.0.100c675 (or 8.0.0.1xx) available AND can upload ?
other user have bootloop AND on FirmwareFinder is only LLD-AL10C00... downloadable
Click to expand...
Click to collapse
I also need this my phone is bricked
:bene:
Zunayedazad said:
I also need this my phone is bricked
Click to expand...
Click to collapse
Unfortunately you can't do anything, i have the same problem so, tried to flash other firmware available with latest update it worked but VoLTE was not working on any available ROM since none of them are for Indian version.
Finally locked the bootloader took it to service center, they factory reset the firmware to "LLD-AL10 8.0.0.101 (C675)" after that my phone is unable to find latest OTA update.
seated_singer said:
Unfortunately you can't do anything, i have the same problem so, tried to flash other firmware available with latest update it worked but VoLTE was not working on any available ROM since none of them are for Indian version.
Finally locked the bootloader took it to service center, they factory reset the firmware to "LLD-AL10 8.0.0.101 (C675)" after that my phone is unable to find latest OTA update.
Click to expand...
Click to collapse
How did you installed other model firmware,please PM me
Download here
Go to the below link for firware indian version
http://pro-teammt.ru/firmware-database/?firmware_model=delhi&firmware_page=0
after gone, search for delhi in search bar, after that search for below info
2017.11.24 Delhi-TL20C01B160 filelist update 2121995838 FullOTA-MF 2458 1650 109780 1
For extracting to flash file see below
https://openkirin.net/user_guide/how-to-extract-partition-images-from-stock-emui-firmware/
do as in the link abow
For flash Stock os see below
can you go with phone in bootloader-mode ?
by me : phone off / usb-wire out of phone / press and hold "vol-down" and put usb-wire in phone. start phone in bootloader : bingo!
you see on bootloader-screen "unlock" & "unlock" in red (by me) the phone is ready to flash
then extract from update.app "recovery_ramdis.img & header" and "system.img & header"
put this 4 files in adb-folder / Windows: open command and cd.. to this folder / on linux open terminal and cd.. to the folder
on my linux-pc i am this files in /home/username/adb. if i start terminal i am automatically in my home-folder and write only "cd adb". this is short-way
fastboot devices (check is phone connected)
if phone connected : fastboot flash recovery_ramdisk recovery_ramdisk.img (extracted out update.app)
next fastboot flash system.img (extracted from update.app)
if this ended : you have customOS on phone
next fastboot erase userdata (this doing what you reed : erase! userdata)
next press and hold "vol-up" and power, phone vibrate and you see Huawei-boot: release power, you see pre-boot messages: release "vol-up", phone boot in erecovery
in erecovery wipe cache and factory-reset . this mace low-level format user_data 0...100%. now is userdate clear and fresh formated. reboot
phone boot as a new phone ! now config, install apps ...
Check and tell :good::good::good::good:
balaji1516 said:
Go to the below link for firware indian version
http://pro-teammt.ru/firmware-database/?firmware_model=delhi&firmware_page=0
after gone, search for delhi in search bar, after that search for below info
2017.11.24 Delhi-TL20C01B160 filelist update 2121995838 FullOTA-MF 2458 1650 109780 1
For extracting to flash file see below
https://openkirin.net/user_guide/how-to-extract-partition-images-from-stock-emui-firmware/
do as in the link abow
For flash Stock os see below
can you go with phone in bootloader-mode ?
by me : phone off / usb-wire out of phone / press and hold "vol-down" and put usb-wire in phone. start phone in bootloader : bingo!
you see on bootloader-screen "unlock" & "unlock" in red (by me) the phone is ready to flash
then extract from update.app "recovery_ramdis.img & header" and "system.img & header"
put this 4 files in adb-folder / Windows: open command and cd.. to this folder / on linux open terminal and cd.. to the folder
on my linux-pc i am this files in /home/username/adb. if i start terminal i am automatically in my home-folder and write only "cd adb". this is short-way
fastboot devices (check is phone connected)
if phone connected : fastboot flash recovery_ramdisk recovery_ramdisk.img (extracted out update.app)
next fastboot flash system.img (extracted from update.app)
if this ended : you have customOS on phone
next fastboot erase userdata (this doing what you reed : erase! userdata)
next press and hold "vol-up" and power, phone vibrate and you see Huawei-boot: release power, you see pre-boot messages: release "vol-up", phone boot in erecovery
in erecovery wipe cache and factory-reset . this mace low-level format user_data 0...100%. now is userdate clear and fresh formated. reboot
phone boot as a new phone ! now config, install apps ...
Check and tell :good::good::good::good:
Click to expand...
Click to collapse
Are you sure that this firmware is for honor 9 lite?!
Do you own a honor 9 lite in fact?!
JamesBott said:
have anyone this FULL-Update lld-al10 8.0.0.100c675 (or 8.0.0.1xx) available AND can upload ?
other user have bootloop AND on FirmwareFinder is only LLD-AL10C00... downloadable
Click to expand...
Click to collapse
huawei-firmware dot com / rom / huawei-honor-9-lite / lld-al10 / 14801
the above is the link i do not have permission to paste links so you need to make it out just delete space and replace dot
@tonino65
look Post #13

[Tutorial] Crossflash, Bypass OPID Mismatched Error

Hi there
Thanks to all other guys here who have made helpful development to tame this beautiful =)
To crossflash models other than LG G8 please read post 3.
Before asking any question please read the troubleshooting section at the bottom of the page.
If you still need some specific help I would appreciate if you bring it up just in the thread instead of sending direct messages.
LG has made things difficult in flashing custom and even stock roms by this new OPID thing! It prevents us from crossflashing but we have been able to use TWRP and change the system and some other partitions to have a different rom. We had to make some changes into OP partition using HxD editor.
But now, through this tutorial, we're able to flash any rom without the need to change OPID in OP partition. Also, there is no need to root or unlock boot-loader.
I was successful to do this on some G8 (LMG820UM) but I AM NOT RESPONSIBLE FOR ANY HARM TO YOUR PHONE!
By continuing to read the following instructions you are actually accepting the risk.
IMPORTANT!
first, MAKE A FULL BACKUP OF ALL PARTITIONS; and I mean it!!!
at least, for your sake, make a backup of "modemst1, modemst2, fsg, fsc, ftm" partitions, for emergency.
Requirements
QPST and Qualcomm USB Driver (get)
LGE SM8150 Firehose (get)
LGUP 1.16.0.3 (get)
LGUP_Common.dll (get)
UI_Config.lgl (get)
LG Mobile Driver 4.4.2 (get)
Preparation
1. Install QPST and Qualcomm USB Driver.
2. Install LGUP.
3. Find the folder named "model" in the installation directory of LGUP, then Create a folder named "common" in the "model" folder.
4. Move "LGUP_Common.dll" and "UI_Config.lgl" into "common" folder. Change the attribute of "UI_Config.lgl" to read only.
5. Install LG Mobile Driver 4.4.2.
Steps
A)
1. Open QFIL.
2. Change "Storage Type" to UFS.
3. Select "Flat Build".
4. Browse for "LGE SM8150 Firehose" and pick it.
5. Now, connect the phone to PC and boot into EDL mode.
6. Open "Select Port" and select the phone, press OK.
7. In "Tools" open the "Partition Manager".
B)
!!!BE CAREFUL TO DO EXACTLY AS THE INSTRUCTIONS SAY OR YOU WILL BRICK THE PHONE!!!
1. Make a backup of and erase these 7 partitions: FTM, Modem_A, Modem_B, SID_A, SID_B, OP_A, OP_B.
1.1. You have to left-click on a partition then right-click on it and select "Manage Partition Data".
1.2. In the pop-up window, you have 4 choices: I. Erase (to erase data on the partition), II. Read Data (to dump or back up the partition), III. Load Image (to restore the partition), IV. Close (to close the window).
1.3. First dump/back up the partition by choosing "Read Data" then Erase it.
2. Close the "Partition Manager" window.
3. Wait for 5 seconds then press Vol- and Power until it restarts.
3.1. Immediately after rebooting, Release the Vol- and Power buttons and press Vol+ to get into Download Mode.
Note: Do not let the phone to begin to boot! If it begins to boot, it may regenerate the SID and FTM partitions data and so you need to redo the whole step B.
C)
1. Open LGUP.
2. Pick your favorite KDZ.
3. Select "PARTITION DL".
4. Press Start. And a pop-up window will appear. In this window you can select which partitions to be flashed.
5. Here, uncheck these partitions: SID_A and SID_B. It will make it able to bypass the OPID Mismatched Error.
6. If you are in Sprint or other platforms you will get the message whether to change the model or not. Of course you know what to do =)
after completing the process it will boot up in some minutes and before starting the customization it will do one restart. just be patient.
ERRORS, QUESTIONS, TROUBLESHOOTING
1. Can I crossflash V50, V60, G8X or other LG devices using this method?
I did it on V50. Maybe it'll work on your devices maybe won't. There's one way to find out; make backup and give it a try.
2. SN is gone, zero, etc.
Restore your original FTM.
3. I can't get into recovery.
Restore the original FTM.
4. I got NT-Code error.
It's been discussed many times in the thread and some solutions have been presented (such as this one, thanks to @animo214 and this, thanks to @kt-Froggy as well as this one, thanks to @StvOchi ). However, you can ignore it if the phone got network.
Note: You need to disable verity on the phone in advance otherwise changes in cust_path_mapping.cfg won't be saved.
5. IMEI is lost, zero, null etc.
Restore LUN5 partitions. If you have no backup it should be repaired using Octopus box. Go to 16.
6. I got "permanently locked" error.
This is because of IMPL lock and you have to restore LUN5 partitions. In case of having no backup you should use Octopus box.
7. All partitions are deleted accidentally.
Follow this instructions.
8. I need to get into PDM mode.
Unzip and restore the attached PDM to FTM partition. Remember, you need to restore your FTM to get into OS.
9. Can I use another phone's LUN5 backup?
NO.
10. Can I use another phone's FTM backup?
Yes. All partitions can be restored from another phone's backup except LUN5 partitions.
11. My phone is stuck in boot-loop.
Restore the original FTM and if it doesn't help redo the whole crossflash process and use a different KDZ this time.
12. Which KDZ is the best (for any matter of use)?
I do not know.
13. Can I crossflash from any source variant to Korean variant or vice versa?
Yes it is possible but you may get error on opening stock camera application because of hardware differences. There are some methods to solve the issue which you can search and find them.
14. Can I downgrade using this method?
Yes.
15. I erased partitions (ftm, op_a, op_b, modem_a, modem_b, sid_a, sid_b) but it still does not let me to crossflash.
Redo the whole process and this time make backup of and erase these partitions too, on both sides A and B: vendor, product, system, boot and userdata. Do not make backup of userdata partition.
16. How can I write IMEI?
A) Dump modem_a and create a copy of it. Then open it in UltraISO and remove IMEIPROT files from image folder. Save and restore it in place of modem_a and modem_b partitions.
B) Make backup of FTM and then flash or restore the PDM file (attached) into your ftm partition. Restart the phone; you'll get into PDM mode.
C) Open Tutty (attached). Select "Serial" in protocol and the proper port of your phone's modem driver. Click open. To test if you have selected the proper port number type "at" and hit enter it should respond"ok". Type the code at%imei=# (replace # with your IMEI) and hit enter. It doesn't matter you get "error" or "ok" after that, just check if IMEI is written via this code at%imei=?. If IMEI is written so you'll have the right MEID and ESN too.
D) Restore the original ftm and modem_a in place of modem_a and modem_b. Restart the phone.
I've already tested this method on V30, V50 and G8. Remember, if the phone has IMPL lock it'll throw "perm. locked" error even if you have written the IMEI.
17. I have lost GPT files of my LG G8, G8X, G8S, V50, etc. and Qfil partition manager does not show anything in the list.
You need to flash GPT files to your device with fh_loader (see this, part C). For that matter use KDZ_Tools to Extract DZ from a KDZ of your device. Then extract the DZ using -c at the end of extracting command. For example: unkdz -f FILE_NAME.kdz -c. It will extract all files besides all GPTs.
18. Which are the LUN5 partitions?
SM8150 has 7 physical partitions known as LUNs which are numbered from 0 to 6. Each LUN is split into several partitions. In Qfil Partition Manager you can see all partitions except those of LUN3 and LUN6 which are hidden. The number of LUNs are shown under the first column named LUN. Therefore, all partitions in front of number 5 are LUN5 partitions.
Some pictures of flashing my LMG820UM, unlocked from Sprint, into OPEN_CA 20j. In normal mode you cannot flash SPR_US to OPEN_CA which is shown in the pictures. But using this thread instruction it allows to flash, even it asks to change the model from SPR_US to OPEN_CA
Until performing the instructions, it shows the "id: 2(SPR_US)" on the Download Mode screen, but after that it cannot recognize the phone model id and shows "id: 0()"
Have fun ^_^
LG K31 Crossflashing:
To crossflash LG K31 go to this guide. Thanks to @Wish39.
LG Stylo 6 Crossflashing:
To crossflash LG Stylo 6 using LG K71 Android 12 firmware see this. Thanks to @Wish39.
LG V50 Crossflashing:
I had two LG V50 (LMV450) to which I flashed Korean Andorid 12 using the method mentioned in the first post. I cannot guarantee that it will work on every V50. After corssflashing I found out that one of them had the problem of draining battery due to not getting into deep sleep mode. To overcome the issue, I reflashed it via "Chip Erase" this time, and then again reflashed it but in the same way mentioned for crossflashing in the first post. Of course, I had created backup and at the end I restored LUN5 partitions.
Hey nice! It's great to have options. I'm currently using us Open OP on my Sprint device (of course totc changed). It's working fine and not sure of any reason to change.
Although, if we do get a11 firmware available, that will change things for sure.
Thanks, nice work!
great, thank you
netmsm said:
Some pictures of flashing my LMG820UM, unlocked from Sprint, into OPEN_CA 20j. In normal mode you cannot flash SPR_US to OPEN_CA which is shown in the pictures. But using this thread instruction it allows to flash, even it asks to change the model from SPR_US to OPEN_CA
Until performing the instructions, it shows the "id: 2(SPR_US)" on the Download Mode screen, but after that it cannot recognize the phone model id and shows "id: 0()"
Have fun ^_^
Click to expand...
Click to collapse
Idk when i opened lgup it's only have 3 option refurbished, upgrade n fota update
Azs5165 said:
Idk when i opened lgup it's only have 3 option refurbished, upgrade n fota update
Click to expand...
Click to collapse
You didnt follow preparation correctly I guess?
netmsm said:
Some pictures of flashing my LMG820UM, unlocked from Sprint, into OPEN_CA 20j. In normal mode you cannot flash SPR_US to OPEN_CA which is shown in the pictures. But using this thread instruction it allows to flash, even it asks to change the model from SPR_US to OPEN_CA
Until performing the instructions, it shows the "id: 2(SPR_US)" on the Download Mode screen, but after that it cannot recognize the phone model id and shows "id: 0()"
Have fun ^_^
Click to expand...
Click to collapse
What OPID does it get assigned once you boot the device? OPEN_CA?
AsItLies said:
Hey nice! It's great to have options. I'm currently using us Open OP on my Sprint device (of course totc changed). It's working fine and not sure of any reason to change.
Although, if we do get a11 firmware available, that will change things for sure.
Thanks, nice work!
Click to expand...
Click to collapse
Like the a11 korean one?
cloud1250000 said:
You didnt follow preparation correctly I guess?
Click to expand...
Click to collapse
I had tried with my lmg850um9 sprint,i accidentally erase entire flash before but i successfull flash with other g8x em kdz but get opid missmatched
Azs5165 said:
Idk when i opened lgup it's only have 3 option refurbished, upgrade n fota update
Click to expand...
Click to collapse
i got the same problem, just 3 options
Just did this successfully, thanks OP. If yer only getting partial options on lgup, remember from the OP, you HAVE to change the UI file to be READ ONLY (do it in properties).
I didn't get the 'change model' pop up, but still worked, although device is still seen as 'um' not 'qm'. My serial # is missing (that's a simple edit in ftm), but the imei is there.
Definitely worked though, now have us op with april security patch.
Will take a few mins to get a root explorer to see what totc says... that should be interesting
AsItLies said:
Just did this successfully, thanks OP. If yer only getting partial options on lgup, remember from the OP, you HAVE to change the UI file to be READ ONLY (do it in properties).
I didn't get the 'change model' pop up, but still worked, although device is still seen as 'um' not 'qm'. My serial # is missing (that's a simple edit in ftm), but the imei is there.
Definitely worked though, now have us op with april security patch.
Will take a few mins to get a root explorer to see what totc says... that should be interesting
Click to expand...
Click to collapse
How to make it?srry i cant understand
alright, G8x Sprint succesfully crossflashed to OPEN CA
Azs5165 said:
Idk when i opened lgup it's only have 3 option refurbished, upgrade n fota update
Click to expand...
Click to collapse
Sebastian Thiago said:
i got the same problem, just 3 options
Click to expand...
Click to collapse
Azs5165 said:
How to make it?srry i cant understand
Click to expand...
Click to collapse
Follow preparation.
cloud1250000 said:
What OPID does it get assigned once you boot the device? OPEN_CA?
Click to expand...
Click to collapse
AsItLies said:
Will take a few mins to get a root explorer to see what totc says... that should be interesting
Click to expand...
Click to collapse
Actually it doesn't change OPID. By not flashing SID partitions we can bypass checking OPID and hence the error.
I checked it now it was OPEN_CA.
Azs5165 said:
I had tried with my lmg850um9 sprint,i accidentally erase entire flash before but i successfull flash with other g8x em kdz but get opid missmatched
Click to expand...
Click to collapse
Follow the steps in part C.
netmsm said:
Actually it doesn't change OPID. By not flashing SID partitions we can bypass checking OPID and hence the error.
I checked it now it was OPEN_CA.
Click to expand...
Click to collapse
curious how the sprint v50 will react to this.. I`ll try this guide when korean A11 gets release.. I'll let you know..
Also.. if it doesn`t change OPID you would get OPID mismatched error on boot.. so..
cloud1250000 said:
Also.. if it doesn`t change OPID you would get OPID mismatched error on boot.. so..
Click to expand...
Click to collapse
If SID partitions are flashed then yes it will throw OPID Mismatched Error. This is why we suggest using "Partition DL" flashing method, unchecking SID partitions.
netmsm said:
If SID partitions are flashed then yes it will throw OPID Mismatched Error. This is why we suggest using "Partition DL" flashing method, unchecking SID partitions.
Click to expand...
Click to collapse
yes but it has to generate new one with proper OPID no? when you load download mode now, does it still says id: 0? i doubt that
cloud1250000 said:
yes but it has to generate new one with proper OPID no? when you load download mode now, does it still says id: 0? i doubt that
Click to expand...
Click to collapse
That's right it generates the original OPID in download mode.
It is probable that some or all data related to OPID are stored in Modemsts partitions to which the SID partition bridges the OPID check function, in boot process. All that we do is to destroy the bridge.
netmsm said:
That's right it generates the original OPID in download mode.
It is probable that some or all data related to OPID are stored in Modemsts partitions to which the SID partition bridges the OPID check function, in boot process. All that we do is to destroy the bridge.
Click to expand...
Click to collapse
can you check which mcfg is used? (field test > mcfg status)

Categories

Resources