Related
I wanted to let everyone know that I was given a ZeroLemon Ultra Glass Armor - 9H Premium tempered glass screen protector for my HTC one M8 in exchange for this review.
Now with that out of the way on with the review! The packaging at first glance was nice. It was not flashy with lots of colorful pictures. It has a plan covering almost like a paper bag but slightly lighter. The ZeroLemon logo is at the top, and has icons on the front displaying the features of the 9H. The inside of the packaging was professionally done. The 9H was on one side, and an alcohol swab and microfiber cloth were in a pocket on the other. I get the impression that the packaging was designed so that it can take impacts, and the 9H would still be protected. I removed all of the contents out of the packaging, and here is where I found an issue. The instructions for installation were in boxes behind the 9H. They have a small picture with text underneath. Each box is assumed to be a step in the installation process. I read through each step, and I was not sure what I was reading. It was like it was written in another language, and then translated to English. Just to give it the benefit of the doubt, I re-read all of the instructions, and came to the same conclusion; however, I have install dozens of screen protectors, so I figured how hard could it be.
I have a process for installing screen protectors using a hot shower to remove dust particles from the air in the bathroom. Generally, this method has served me well for getting a dust free lint free application of a screen protector, so I decided to use this method for applying the 9H. I went through my normal process, and when it was time to put the 9H on, I was very surprise how easy it was to line up and get it perfect on my screen. Because it is tempered glass, I could hold it from one end, and move it any way I wanted to. I also did not get any finger prints on the bottom of the 9H because it was rigid. After it was on and centered, I had decided that was the easiest screen protector I had “EVER” installed. At first there were a lot of small air bubbles under the screen. I kept working on pushing them out. I was a little worried because I could not get them all out. By the next day I still had some, but eventually I worked them all out. After inspecting the 9H on my M8, I could not see any imperfections. I thought it was a clean install; however, I found a small piece of lint close to the bottom of the screen. One thing about the 9H is that even with the small piece of lint, there was no air bubble around it. I don’t think I would have found it if I had not been specifically looking for it. I could not find any other imperfections in the installation.
The 9H is thicker than the last screen protector that I had, so you will need to be aware about this. I use a Seidio Surface case, and it was a little loose with my old screen protector; however, it is now a snug fit. I actually like the Seidio Surface case more now with the 9H on as I thought it should have been a better fit than it did. The surface of the 9H is very smooth, and I can’t tell I have a protector on it. It is not holding finger prints like my last protector did, and I have to admit that ZeroLemon’s claim of turning your screen into an “Anti-fingerprint ‘Oleophobic’ display” is true! The 9H does resist oil and finger prints like no other protector I have ever used. One thing to note is that the 9H is very reflective. You will get reflections off of any light source, but the screen clarity is extremely good.
My overall assessment of the 9H is excellent. The packaging could use a little work as far as the instructions go, but the rest of the packaging was very professional if a little plain. Installation was a snap that easily beat all other screen protectors on ease of installation that I have ever used. The 9H is a little thicker which could impact what case you are using so be mindful about that. Screen clarity is fantastic and the ability to resist oil and finger prints leaves the screen clean most of the time (ie no more wiping your phone on your shirt of pants..yuck). The 9H is not an anti-glare protector, so you will have to deal with the reflective surface; however, I think this is minor compared with the benefits the 9H brings to the table.
Well, that is my review; I hope it has been helpful. I plan on using the 9H as my daily driver. I normally use an anti-glare protector, but I am so impressed with the clarity, oil & finger print resistance that I am going to keep using it. Oh, other reasons to keep using it would be the protection from impacts, drops, and scratches; however, I have not encountered any of those since using this screen protector, so I did not include it in my review. Let me know if you have any questions. Thanks.
Rob
Here is my review of It
Here is what stood out to me on this overall exceptional screen protector.
1. The Fit- This is an exact fit of the screen on some glass protectors like my Mime glass there is a 0.5 mm or so border that makes installation easier, there is no such boarder on this protector which I think is good overall because it makes the phone look and feel better due to the screen protector covering 100% of the glass.
2. Installation- Even with the exact fitting glass the install is easy like most glass protectors. The way I install screen protectors is the hinge method, which makes lining up the glass go perfect every time, just look up "glass screen protector hinge method" on YouTube and you will see what I am talking about. After I got the screen protector on I just pressed out some tiny bubbles around the edges and I was good to go. Also the box comes with everything that you would need to get your screen clean.
3. Using my phone- Because this is a glass screen protector there is nothing to talk about clarity wise as it is perfectly clear. For fingerprints I would say that it is better than the naked screen but will still get fingerprints, they are very easy to wipe off and it is nowhere near the fingerprint magnet that some plastic screen protectors can be.
ZeroLemon is now my favorite brand of screen protectors I can't believe that I spent so much on Mime screen protectors when these are such a better value and quality.
Free for reviews aside-is it actually a good screen protector? My Nilikin has a chip on the corner and is starting to get cracked, so I like the idea of a cheap one with a lifetime warranty.
DevenStonow said:
Free for reviews aside-is it actually a good screen protector? My Nilikin has a chip on the corner and is starting to get cracked, so I like the idea of a cheap one with a lifetime warranty.
Click to expand...
Click to collapse
ok, so you think just because we got a free screen protector we are simply saying it is good as "Payment?" I like how people review it and say it is good and then get asked if it is really good... Sorry, just kinda annoys me.
That aside, I actualy like this one more than my Nilikin. with in a couple weeks my nilikin had a couple small chips. so far this one is chip free, but It is only a few days on my device... Time will tell to this. The nilikin was just a touch smaller than the glass screen, just a small border mainly top and bottom, but the zero lemon fits PERFECTLY. I could see this being an issue if you are not good at putting on a screen protector, but for most of us slightly anal retentive people it is freaking great.
DevenStonow said:
Free for reviews aside-is it actually a good screen protector? My Nilikin has a chip on the corner and is starting to get cracked, so I like the idea of a cheap one with a lifetime warranty.
Click to expand...
Click to collapse
I have had mine on a little longer, and I really like it. My Nilikin was a fingerprint magnet, this one resist them. I will admit my Nilikin did protect my screen when I dropped it, it took the crack and not my screen. Will this one do the same? I believe it will, but I won't purposely drop my phone to find out. And it fits perfect, edge to edge. Where the Nilikin was a little smaller. I am ordering one for my wife's M8. Less expensive and lifetime warranty.. How can you beat that?
DevenStonow said:
Free for reviews aside-is it actually a good screen protector? My Nilikin has a chip on the corner and is starting to get cracked, so I like the idea of a cheap one with a lifetime warranty.
Click to expand...
Click to collapse
My review is genuine. Just because we got a $9 screen protector for free does not mean we owe them anything other than the review we promised we would give them. If the 9H was worthless, I would have said that, but that is not the case. I spent my time to change a perfectly good screen protector, make notes and write the above review. I didn't do it to get a free screen protector that would only cost me $9. My time is worth more than that. I did it because I thought it would be a cool thing to do. If people don't believe my review is real, that is their problem as I reviewed it as I saw it. The 9H is really as good as I reviewed. :good:
Thread Closed in accordance with XDA Forum Rule #7
7. Do not spam, sell or trade on the forums.
If you wish to advertise a product, simply contact us. We can provide ads but you are not permitted to just post it in the forums. If you do, it will be removed and you're likely to receive a ban.
On the 30th Nov 2012 the Marketplace closed. The buying, selling, trading and / or exchanging of any item is now prohibited on XDA, in any forum or via Private Messages. We now use www.swappa.com
Click to expand...
Click to collapse
I haven't been able to find any reviews on the XtremeGuard Spartan Tempered Glass Screen Protector.
You can find them: http://www.xtremeguard.com/LG-G2-AT-T-Version-ONLY-Screen-Protectors-p/lg0g20attxgrds.htm
I had a bad experience with their wet application screen protectors and was very dissatisfied with them. But now they have dry application ones!
Does anyone have any reviews of the tempered glass screen protector or the HI-DEF Screen Protector?
Bonus for reading! There's a sale on now!
Use code 90off1 to get 90% off of everything on the site.
You can get a tempered glass for $6 shipped or HiDef Protector for $0.70 FS.
xNotta said:
I haven't been able to find any reviews on the XtremeGuard Spartan Tempered Glass Screen Protector.
You can find them: http://www.xtremeguard.com/LG-G2-AT-T-Version-ONLY-Screen-Protectors-p/lg0g20attxgrds.htm
I had a bad experience with their wet application screen protectors and was very dissatisfied with them. But now they have dry application ones!
Does anyone have any reviews of the tempered glass screen protector or the HI-DEF Screen Protector?
Bonus for reading! There's a sale on now!
Use code 90off1 to get 90% off of everything on the site.
You can get a tempered glass for $6 shipped or HiDef Protector for $0.70 FS.
Click to expand...
Click to collapse
Had two of these (the glass) its okay, hit and miss really. My first order had really nice tapered edges but the silicon peeled away from the phone edge itself , my second order (damn their 90% off sales) had very very slight tapering- to the point where it was sharp, but this one stuck to the edge just fine however was prone to chipping on the sides. I have it on to this day, albeit a crack or two (from drops) and the oleophobic coating doesn't last very long... But honestly for the price its pretty good for what you get. It's also very strong.
Unless they've changed it, the HD one is terrible. It goes edge to edge, but because of the curved glass it doesn't completely stick down. Mine caught on my pocket and peeled off in a matter of minutes after applying it.
The tempered glass is much better and is what I have been using since they came out in June. I posted a mini review here which was mostly positive, minus the rim of bubbles. I had to replace my device a few months ago so I ended up putting another one on. Not sure if it was cut slightly better or I got a perfect alignment, but there's only a slight amount bubbles along the left side and that's it. Much less noticeable (and not at all with my case on). I can get a picture if you want. I paid $4 for mine, but even at $6 I think it's a great deal.
Also, if you do get one, don't follow their directions for putting it on. Use the "hinge" method instead (google/youtube it)
I'd stay away. I figured with the 90% off coupon I'd try one of their ridiculously priced tempered glass protectors. When I opened it I found that it already had some dust on it but I installed it anyway. The edges never stuck and it looked like ****. I contacted them and they sent me a replacement, which upon opening I realized wasn't for the G2. Back to waiting for them to reply to email and then another 2 weeks to try for a successful replacement...
On sale, and now only $4.50 with coupon code "newyear85". I'm tempted to try, but I already have a regular screen protector perfectly installed, so don't really want to risk it...
waingro808 said:
On sale, and now only $4.50 with coupon code "newyear85". I'm tempted to try, but I already have a regular screen protector perfectly installed, so don't really want to risk it...
Click to expand...
Click to collapse
I was in the exact same situation as you and regret my decision to remove my already-installed screen protector to try the Spartan. After my bad experience and multiple emails they eventually refunded my money.
I just received an IQ Shield Matte screen protector and I'm really disappointed. It screws up the colors and whites have a rainbow effect to them. I took it off and now I'm looking for a new one. I'd like one that is:
1. Anti-glare
2. Anti-fingerprint
3. Clear and doesn't screw with this beautiful display.
Any recommendations?
Thanks in advance!
Thee one and only,,,,but more importantly expensive whitestone dome screen protector is probably the most I've heard of working...45 to 50 dollars tho
Any you can recommend about $20 and under?
First I tried the Spigen NeoFlex film screen protectors and they are garbage. Then I ordered a cheapo full cover tempered glass screen protector from eBay and it works great.
http://www.ebay.com/itm/3D-Full-Cov...ector-For-Samsung-Galaxy-Note-8-/332345555824
I've only been using it for about a week so I can't say how well it will keep dust out. Sensitivity is great, I don't notice it's on at all. It's not Anti-glare or Anti-fingerprint but it's only $8.
I'm using the i-blason tempered glass.
Under $20, it's still on, doesn't interfere with the screen.
It's still going to collect fingerprints and smudges due to the oils in our skin, but it wipes off easily.
jellyhead said:
First I tried the Spigen NeoFlex film screen protectors and they are garbage. Then I ordered a cheapo full cover tempered glass screen protector from eBay and it works great.
http://www.ebay.com/itm/3D-Full-Cov...ector-For-Samsung-Galaxy-Note-8-/332345555824
I've only been using it for about a week so I can't say how well it will keep dust out. Sensitivity is great, I don't notice it's on at all. It's not Anti-glare or Anti-fingerprint but it's only $8.
Click to expand...
Click to collapse
thats becuz the neoflex is a rubber 3m film, not plasti-glass. i honestly like Spigen Neoflex screen protector. only downfall is using the pen on it leaves lines where youve drawn .. but cant be felt by your touch
Sent from my SM-N950U using XDA-Developers Legacy app
mlock420 said:
Thee one and only,,,,but more importantly expensive whitestone dome screen protector is probably the most I've heard of working...45 to 50 dollars tho
Click to expand...
Click to collapse
I've never seen this warning before on anything from Amazon.
roaduardo said:
I've never seen this warning before on anything from Amazon.
Click to expand...
Click to collapse
Somebody got a knock off, I read. The screen protector he got was plastic instead of glass.
Sent from my SM-N950U using XDA-Developers Legacy app
roaduardo said:
I've never seen this warning before on anything from Amazon.
Click to expand...
Click to collapse
Oh wow that sucks but for some reason YouTubers recommend this for s8 and note 8 idk man it looks promising but yeah that warning I've never seen before
There are plenty of discussions under the accessories section
But I'd say don't bother. I had one tempered glass protector on for an hour before it annoyed me too much and I removed it! Destroys the feel and use of the phone.
I have been buying the RhinoShield stuff for my stuff and its held up really well for me.
rhinoshield.io is where you'll find it.. (I havn't logged in long enough that I forgot my account info :/ )
edit: found my login info so now I can add the link:
https://rhinoshield.io/collections/samsung-galaxy-note-8
Plus, nobody else's stuff has any evidence that even suggests it actually works.
I havn't tried it for the note8 but I came by this thread while I was researching if anyone had so figure I'd mention it. It is expensive to get the whole kit (screen protector, bumper, and in this case rear glass protector), but I found it worth it..
I have a cheapo '2.5D' glass and its doing well. Touch response is worse mind.
There is a speaker hole at the top; this needs covering with a bit of tape or you wil get dust between the screen and the protector.
bonerp said:
There are plenty of discussions under the accessories section
But I'd say don't bother. I had one tempered glass protector on for an hour before it annoyed me too much and I removed it! Destroys the feel and use of the phone.
Click to expand...
Click to collapse
I purchased a relatively inexpensive TG protector. While it exhibits many of the drawbacks of TG protectors that aren't full-adhesive (i.e. all of them except the Whitestone Dome), it doesn't have quite the "rainbow effect" that I've seen with other protectors.
Its real downside, though, is its slickness ... I need a more paper-like surface to better control the s-pen. Just the tiniest bit of friction would help. I'm thinking that I may have to go to a film protector rather than TG to get that, though. Does anyone else have this issue with TG protectors?
eglesiaw said:
I just received an IQ Shield Matte screen protector and I'm really disappointed. It screws up the colors and whites have a rainbow effect to them. I took it off and now I'm looking for a new one. I'd like one that is:
1. Anti-glare
2. Anti-fingerprint
3. Clear and doesn't screw with this beautiful display.
Any recommendations?
Thanks in advance!
Click to expand...
Click to collapse
Ever since the introduction of the edge curved screen (and I have owned the lot) I have never found a decent screen saver. It is a subject on every forum here on XDA and concerning all the Samsung edge models.
I have taken recommendations only to find them useless. Some use a glue, some have a dotted appearance after application some just suck period!
I used a partial screen saver once that just covered the centre of the screen but even that proved awful. Even used Samsungs own on the Note 7 and though that was not glass it also was horrible.
If any peer here does find a working screen protector PLEASE let us know.
Ryland
Whitestone is the best.
I like the Spigen NeoFlex, it's been great so far for me. Went on easily, hasn't peeled off the corners/edge (and I use the Spigen Tough Armor case) and after the 12 hours to settle on the screen it looks great and writing on it with the s-pen feels good too. My personal opinion and the only one I've tried so far on my Note 8
faded03cobra said:
Whitestone is the best.
Click to expand...
Click to collapse
Can the Whiitestone be removed once it's been glued to the Screen?
yes
I got the Bodyguardz glass protector sold to me at the AT&T store (lazy me). The guy installed it and it's ok. Glass protectors have an innate problem in that they sometimes don't transmit touches to the touchscreen itself. This one is no different but it does fit well. And it has a lifetime free replacement policy. I'll keep it to protect my screen.
Otao sent me their new screen protector for the Note 8, and I have to say, this is probably as good as it gets for normal stick on tempered glass protectors on this phone.
The box is pretty standard and comes with all the screen protector installation essentials.
The key to a good installation on any screen protector is making sure that your phone is clean and that you line up the protector perfectly. This is where the installation tray shines... I have installed protectors in the past on phones (feel free to look at old posts) and I can honestly say that this installation tray is the best one I have used... Initially I was worried because when I went to put the glass into it, it was tight. I thought maybe the sizes were off, but no, it was exactly the right size to make sure that there was very little to no wiggle room in there for the protector. This is good obviously because it only lets you put it in one spot, the right one.
Once you have it lined up, you just drop on the glass and make sure the edges are all the way down. (I just used the included microfiber cloth and went over them a few times.) Next you pop off the guide tray and you're done.
If you are using this screen protector without a case you will notice the increase in thickness, but it's not terrible. With a case however it fixes one of my biggest pet peeves.
You have to be careful when putting cases on when you have this screen protector installed because the bezels are so small on the phone that in order for it to actually protect the whole screen it goes pretty much all the way to the end. BUT this is awesome because the cases that I tried (ringke and rhinoshield) didn't knock off or move the screen protector, they came right up to the edge of it and sat almost flush. (I like this because I HATE when pocket lint gets caught between the protector and the case as I am sure many of you do.)
One thing I noticed is that while this protector does have the black bars all the way around it, it looks like they shrunk on the sides a little bit when compared to the Otao protector from the s8+. This makes it sort of a middle ground between the ones that have the clear sides but you can see the glue and the protectors that have black all the way around but cut off some of the screen. It's not perfect but I like how you don't lose much, if any of the screen real estate and you can only see a little bit of the adhesive.
Overall I would say that this screen protector (so far) is pretty legit. I haven't noticed any loss in sensitivity, no rainbowing, no clicking and no covering over any sensors. The dot matrix is visible under certain lighting conditions but that is to be expected.
I only just installed this protector and will update this post if anything goes wrong or changes, but if this is like my S8+ version, i'm sure I won't have any issues.
If you have any questions or anything let me know and i'll try to respond and get them answered.
Gurule92 said:
Otao sent me their new screen protector for the Note 8, and I have to say, this is probably as good as it gets for normal stick on tempered glass protectors on this phone.
The box is pretty standard and comes with all the screen protector installation essentials.
The key to a good installation on any screen protector is making sure that your phone is clean and that you line up the protector perfectly. This is where the installation tray shines... I have installed protectors in the past on phones (feel free to look at old posts) and I can honestly say that this installation tray is the best one I have used... Initially I was worried because when I went to put the glass into it, it was tight. I thought maybe the sizes were off, but no, it was exactly the right size to make sure that there was very little to no wiggle room in there for the protector. This is good obviously because it only lets you put it in one spot, the right one.
Once you have it lined up, you just drop on the glass and make sure the edges are all the way down. (I just used the included microfiber cloth and went over them a few times.) Next you pop off the guide tray and you're done.
If you are using this screen protector without a case you will notice the increase in thickness, but it's not terrible. With a case however it fixes one of my biggest pet peeves.
You have to be careful when putting cases on when you have this screen protector installed because the bezels are so small on the phone that in order for it to actually protect the whole screen it goes pretty much all the way to the end. BUT this is awesome because the cases that I tried (ringke and rhinoshield) didn't knock off or move the screen protector, they came right up to the edge of it and sat almost flush. (I like this because I HATE when pocket lint gets caught between the protector and the case as I am sure many of you do.)
One thing I noticed is that while this protector does have the black bars all the way around it, it looks like they shrunk on the sides a little bit when compared to the Otao protector from the s8+. This makes it sort of a middle ground between the ones that have the clear sides but you can see the glue and the protectors that have black all the way around but cut off some of the screen. It's not perfect but I like how you don't lose much, if any of the screen real estate and you can only see a little bit of the adhesive.
Overall I would say that this screen protector (so far) is pretty legit. I haven't noticed any loss in sensitivity, no rainbowing, no clicking and no covering over any sensors. The dot matrix is visible under certain lighting conditions but that is to be expected.
I only just installed this protector and will update this post if anything goes wrong or changes, but if this is like my S8+ version, i'm sure I won't have any issues.
If you have any questions or anything let me know and i'll try to respond and get them answered.
Click to expand...
Click to collapse
Product link
[Installation Tray] Galaxy Note 8 Screen Protector, OTAO 3D Tempered Glass Screen protector [case friendly] 9H Hardness Tough Sensitivity Samsung screen protector Note 8
https://www.amazon.com/dp/B075XKZX3Y/ref=cm_sw_r_cp_apa_nEZbAbFG3Z0DK
Sent from my SM-N950U1 using Tapatalk
badrsj said:
Product...
Click to expand...
Click to collapse
But you really don't need to quote the whole OP post again...
Sent from my Galaxy Note8 using XDA Labs
Hadn't realized that
Sent from my SM-N950U1 using Tapatalk
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
I made the Whitestone Dome work with the UAG PLASMA AND PLYO. With a Dremel and sanding the corners. The PLASMA is my flavored case for looks and protection.
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
I don't have any UAG cases but it can't be bigger in the front then rhinoshield can it? I would guess itd work but can't say for sure
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
If it's the corners you're worried about they come in pretty good. Check out the pic
So is it a full adhesive protector?
Sokudoningyou said:
So is it a full adhesive protector?
Click to expand...
Click to collapse
I don't think it is. I see micro dots in one of the pictures.
Sokudoningyou said:
So is it a full adhesive protector?
Click to expand...
Click to collapse
Nope sadly its not. But its still not bad for what it is
What Sh!ts me off the most is that here in Oz NOTHING can be delivered...
If I want it delivered I have to use a redirect service thaty will add anywhere from $5 to $20 to send it....:crying:
ultramag69 said:
What Sh!ts me off the most is that here in Oz NOTHING can be delivered...
If I want it delivered I have to use a redirect service thaty will add anywhere from $5 to $20 to send it....:crying:
Click to expand...
Click to collapse
That's unfortunate. 5 bucks isn't too bad. But 20. Nahh
says out of stock, how much was it?
OutCastedSheep said:
Does it work with UAG cases? like the Monarch or the Plasma? those case really kills most TG protectors. even the domeglass. if you didnt put it on perfect, you can say 45 bucks byebye.
thanks.
Click to expand...
Click to collapse
This one fits, the one from the OP 100% no, the corner rounding isn't flat enough. If you compare both on the pictures you'll see.
https://www.amazon.de/dp/B075YPSQSY/..._9w3aAb97J1R50
On Amazon.com it is available too.
https://www.amazon.com/gp/aw/d/B075Y...k+note+8&psc=1
pappschlumpf said:
This one fits, the one from the OP 100% no, the corner rounding isn't flat enough. If you compare both on the pictures you'll see.
https://www.amazon.de/dp/B075YPSQSY/..._9w3aAb97J1R50
On Amazon.com it is available too.
https://www.amazon.com/gp/aw/d/B075Y...k+note+8&psc=1
Click to expand...
Click to collapse
Is this full adhesive, or just the edges?
deebo007 said:
Is this full adhesive, or just the edges?
Click to expand...
Click to collapse
Edge only. Forget about full adhesive, except whitestone. I've ordered two classic full adhesive @ AliExpress. A joke Bubbles, not adhering properly on the right and left side. And well the UAG wouldn't have fit with both too. Opened a dispute for both and got my money back.
Gesendet von meinem SM-N950F mit Tapatalk
With the rounded side edges, this will not be an easy phone to fit screen protectors for. Please post if you find any others.
This is what I have found so far. All ship from China and take 4-6 weeks for delivery.
Vinyl:
Olixar brand on MobileFun website. $10.99
TPU:
AVIDET brand on Amazon website. $7.99
Glass:
HHUAN brand on Amazon website. $11.97
ZAGG InvisibleShield Ultra VisionGuard+ Screen Protector from Verizon
Great screen protector! Fits perfect with a case and includes a small one for the secondary screen. Easy install. Would def recommend
Whitestone Dome glass
Whitestone has a screen protector for the LG wing have anyone use Whitestone before any good?
I use Mi 10 Pro hydrogel screen protector . Just got a screen protector without the hole for the selfie camera. Cost around $1 per protector.
https://www.amazon.com/gp/product/B08L78S31X/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
I got this one and fits perfectly and no bubbles after I installed it and left it overnight
Just got these, installed and now I cannot get my fingerprint to register. I deleted it retrained it with the screen protector on and still no luck.
Got these. Typically I steer clear of the screen protector film. I generally always go with the tempered glass screen protector. But since the fingerprint wouldn't work with the tempered glass and tried this film. See link below. Works great feels smooth like glass. Provides better grip also. I put one on the screen as well as on the back of the phone. I can open and close it with one hand now because there's a little extra grip on the screen. Fingerprint also works with these.
https://www.amazon.com/gp/aw/d/B08L78S31X?psc=1&ref=ppx_pop_mob_b_asin_title
kaluna00 said:
Got these. Typically I steer clear of the screen protector film. I generally always go with the tempered glass screen protector. But since the fingerprint wouldn't work with the tempered glass and tried this film. See link below. Works great feels smooth like glass. Provides better grip also. I put one on the screen as well as on the back of the phone. I can open and close it with one hand now because there's a little extra grip on the screen. Fingerprint also works with these.
https://www.amazon.com/gp/aw/d/B08L78S31X?psc=1&ref=ppx_pop_mob_b_asin_title
Click to expand...
Click to collapse
THX for the link, just ordered.
I typically don't use screen protectors at all, just the liquid sealers.
I'm actually more interested in using to cover the back of the phone.
Did you cut out a hole for the cameras,& if so, how did you go about doing so?
I plan on using my Spigen case to trace out & cut w/an X-Acto knife.
Considered getting a skin for the Galaxy S20/S20 + (closest I could find, dimension wise), but, it'd still need some alterations, so, I skipped that idea.
If anyone finds a bodyskin for the Wing, please post a link in this thread.
KOLIOSIS said:
THX for the link, just ordered.
I typically don't use screen protectors at all, just the liquid sealers.
I'm actually more interested in using to cover the back of the phone.
Did you cut out a hole for the cameras,& if so, how did you go about doing so?
I plan on using my Spigen case to trace out & cut w/an X-Acto knife.
Considered getting a skin for the Galaxy S20/S20 + (closest I could find, dimension wise), but, it'd still need some alterations, so, I skipped that idea.
If anyone finds a bodyskin for the Wing, please post a link in this thread.
Click to expand...
Click to collapse
I cut a notch around all three cameras. I figured it would at least protect the back of the phone when I get my case. For now hopefully it'll help it not get scratched
Front screen, bottom screen, and back have the film on them... Liking it.
Has anyone found a tempered glass screen protector that the the finger print sensor works through?
I ordered a Spigen case from Amazon, but decided to upgrade to a better one I found at a T-Mobile store. I have AT&T and it didn't matter at all in regards to the accessories I got today. They also had a screen protector which I purchased as well. It's pricey compared to amazon, it has more support on the sides than the Spigen one does. The screen protector I bought wasn't an Invisishield, it's a Case Mate and it's working very well for me. Just wanted to thrown that out there in case it cam help anyone.
Is the Case-Mate a tempered glass screen protector or a film?
Thanks for sharing
There is a tempered glass screen protector on Amazon. It's made by UniqueMe. Only sticks at the edges, but fits well and wraps around the curved screen. Feels great to the touch. And touchscreen sensitivity works extremely well. Optically, I'd give it an 8 out of 10.
When installing, you need to line it up with the bottom edge of the screen so that there is a gap at the top. This is needed to let the light dimming sensor see out. Also, it is quite fragile. I dropped my phone into a soft bath mat and the screen protector cracked.
Already on my third UniqueMe. Fingerprint sensing works decently. You have to get the hang of it. If possible, definitely re-enroll your finger prints after installing the protector. Works much better that way.
Amazon.com: [2 Pack] UniqueMe Screen Protector for LG Wing 5G Tempered Glass, 3D Full Coverage Film HD [Easy Installation] Edge to Edge Protection : Cell Phones & Accessories
Buy [2 Pack] UniqueMe Screen Protector for LG Wing 5G Tempered Glass, 3D Full Coverage Film HD [Easy Installation] Edge to Edge Protection: Screen Protectors - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
kaluna00 said:
Is the Case-Mate a tempered glass screen protector or a film?
Thanks for sharing
Click to expand...
Click to collapse
You’re welcome and according to their site it’s one of each for each screen. It‘s working very well for me so far. I like it. Also, if the link has to be removed for a rule violation I’m unaware of mods please do so.
Anyone knows if theres a privacy screen protector tpu film for the LG wing thats really good
I hope it is there
This is all I got doesn't make me feel very protected
Ohiojeff said:
This is all I got doesn't make me feel very protected
Click to expand...
Click to collapse
WING Front Screen Case / Protector
This is only first gen., but if I had some of these available. Would anybody be interested in using these?
forum.xda-developers.com
kaluna00 said:
WING Front Screen Case / Protector
This is only first gen., but if I had some of these available. Would anybody be interested in using these?
forum.xda-developers.com
Click to expand...
Click to collapse
I bought 2 from you. I like the idea but a hard rubber material would be much better than the plastic. Both of mine have broken from 1st drops. They did protect the front screen though.