So I recently upgraded from the P8 Lite 2015 to the P8 Lite 2017 and I was wondering if I can flash the P8 Lite 2015 ROMS on my P8 Lite 2017. PRA-LA1C185B167.
Otherwise are there any ROMS out there for the P8 Lite 2017 ROMS?
Los14.1
Adi5 said:
Los14.1
Click to expand...
Click to collapse
Link please.
Tino_M said:
Link please.
Click to expand...
Click to collapse
https://forum.xda-developers.com/p8lite/development/rom-lineageos-14-1-huawei-p8-lite-2017-t3649292
Adi5 said:
https://forum.xda-developers.com/p8lite/development/rom-lineageos-14-1-huawei-p8-lite-2017-t3649292
Click to expand...
Click to collapse
I've just flashed the zip file now my phone turns off after I reboot system.
Please help.
Tino_M said:
I've just flashed the zip file now my phone turns off after I reboot system.
Please help.
Click to expand...
Click to collapse
Installation Guide:
I did a full wipe since we can't backup data on my own twrp, so I'm not responsible for any data lost, DO ONLY IF YOU KNOW WHAT ARE YOU DOING.
Download the vendor.img from this link.
Copy the internal storage.
Wipe, data, cache & system.
flash the rom.
Run adb shell from terminal.
flash the vendor.img partition with: dd if=/sdcard/vendor.img of=/dev/block/bootdevice/by-name/vendor .
Reboot and enjoy the rom.
gyb001 said:
Installation Guide:
I did a full wipe since we can't backup data on my own twrp, so I'm not responsible for any data lost, DO ONLY IF YOU KNOW WHAT ARE YOU DOING.
Download the vendor.img from this link.
Copy the internal storage.
Wipe, data, cache & system.
flash the rom.
Run adb shell from terminal.
flash the vendor.img partition with: dd if=/sdcard/vendor.img of=/dev/block/bootdevice/by-name/vendor .
Reboot and enjoy the rom.
Click to expand...
Click to collapse
This ROM doesn't work on my P8 Lite 2017 PRA-LA1C185B167. It'd go into the boot animation then turn off. Had to flash the stock ROM via fastboot.
Any other ROMS that could work?
Related
Hello!
Simple question: i'm on a custom rom and i have twrp recovery. How can i flash the stock rom (ale-l21 single sim)? I've tryed in many ways but at the end i'm ever in a bootloop
Thx for eventual answers in advance
Black_SmokAH said:
Hello!
Simple question: i'm on a custom rom and i have twrp recovery. How can i flash the stock rom (ale-l21 single sim)? I've tryed in many ways but at the end i'm ever in a bootloop
Thx for eventual answers in advance
Click to expand...
Click to collapse
Wipe data/factory reset and b611 update.zip file flash in twrp
Adi5 said:
Wipe data/factory reset and b611 update.zip file flash in twrp
Click to expand...
Click to collapse
Where can i find that zip file?
Black_SmokAH said:
Where can i find that zip file?
Click to expand...
Click to collapse
https://forum.xda-developers.com/p8lite/general/security-update-ale-l21c432b611-single-t3688441
B611 full
Adi5 said:
https://forum.xda-developers.com/p8lite/general/security-update-ale-l21c432b611-single-t3688441
B611 full
Click to expand...
Click to collapse
I love u
Anybody have B896 zip???
[Solve]p8lie back to stock with TWRP
Black_SmokAH said:
Hello!
Simple question: i'm on a custom rom and i have twrp recovery. How can i flash the stock rom (ale-l21 single sim)? I've tryed in many ways but at the end i'm ever in a bootloop
Thx for eventual answers in advance
Click to expand...
Click to collapse
FOR P8 LITE ALE-21
Hi
If YOU FLASH A CUSTOM ROM IN P8 LITE AND DO NOT BACK TO MIUI 4 READ THIS TEXT.
1-restart in your TWRP and Wipe all partition( interational sd auto wiped )
2-download oficial frameware and copy update.app in dload folder in sdcard.
Huawei P8 Lite ALE-L21 ( Pakistan Model )
HUAWEI P8 Lite ALE-L21 C185B525 Andriod 6.0 EMUI 4.0 Stock Rom
download link: download-c.huawei.com/download/downloadCenter?downloadId=81665&version=324167&siteCode=pk
3-restart your phone and keep vlomup and volomdown both to install stock miui4.
complete
Hello, I have a P10 L09C113 rebranded in L29-C432B360 and then rooted with Magisk V16 installed via TWRP 3.2.1-o by Blackball (https://forum.xda-developers.com/p10-plus/development/recovery-twrp-3-2-1-0-oreo-t3734993)
Today I received a notification about a system update to 8.0.0.365 via OTA (about 300 MB) on system settings app.
Is it safe to accept the update?
Or do I have to flash the stock recovery first?
Or do I have to uninstall Magisk before and then to flash stock recovery?
Or ?
Balteck said:
Is it safe to accept the update?
Or do I have to flash the stock recovery first?
Or do I have to uninstall Magisk before and then to flash stock recovery?
Or ?
Click to expand...
Click to collapse
Exciting!
I recommend this method as it will ensure it works correctly:
https://forum.xda-developers.com/p10/how-to/guide-manual-updgrade-to-update-oreo-t3758286
You will indeed need the stock recovery, and this method does it all for you. Simply re-flash TWRP and Magisk after its installed and booted once. Good luck!
Silently said:
Exciting!
I recommend this method as it will ensure it works correctly:
https://forum.xda-developers.com/p10/how-to/guide-manual-updgrade-to-update-oreo-t3758286
You will indeed need the stock recovery, and this method does it all for you. Simply re-flash TWRP and Magisk after its installed and booted once. Good luck!
Click to expand...
Click to collapse
at the end I flashed stock recovery and used Firmware Finder App.
In this way I downloaded the firmware from system settings app and updated successfully.
Now I will flash TWRP, but I'm looking for the best one:
@Blackball that cannot decrypt /data or @espaciosalter20 that decrypt /data, but I don't know if is able to flash Magisk
Balteck said:
Now I will flash TWRP, but I'm looking for the best one:
@Blackball that cannot decrypt /data or @espaciosalter20 that decrypt /data, but I don't know if is able to flash Magisk
Click to expand...
Click to collapse
TWRP 3.2.1-0 for P10 v0.1 from Pretoreiano80 works well for 8.0 ROMs (like stock firmware you have flashed.
(Blackball's is useful if you're exploring 8.1 ROMs (such as the available Treble images))
Silently said:
TWRP 3.2.1-0 for P10 v0.1 from Pretoreiano80 works well for 8.0 ROMs (like stock firmware you have flashed.
(Blackball's is useful if you're exploring 8.1 ROMs (such as the available Treble images))
Click to expand...
Click to collapse
Thank you, but I read on thread:
Some of you have been reporting that mounting /system or another partitions doesn't work. I have discover that you need to decrypt data *before* to mount any other partitions.
I didn't set pin or fingerprint on my P10.
May I use this TWRP to backup and restore partition (system/boot in readonly image) and install Magisk v16?
Balteck said:
May I use this TWRP to backup and restore partition (system/boot in readonly image) and install Magisk v16?
Click to expand...
Click to collapse
The worst you can do is try. Seriously, backing up will not damage your system and if you see any errors then try a different TWRP version. You can flash as many of those as you like through fastboot until you find one that works for you!
Backup for sure, but flash magisk?
Could it corrupt system or data?
Inviato dal mio VTR-L29 utilizzando Tapatalk
Balteck said:
Backup for sure, but flash magisk?
Could it corrupt system or data?
Click to expand...
Click to collapse
If you have a backup it doesn't matter
NOTE:I shall not be responsible for any damage cause to your phone by this procedure.
As OREO on Huawei P8 Lite 2017 brings treble support so rooting it is an issue for everyone.
I am here to guide you how to root Huawei P8 Lite 2017 (also known as Honor 8 Lite).
Requirements:
1.Unlocked Bootloader
2.Oreo Updated
3.Current running firmware (mine PRA-LA1C185B366)
4.Huawei Update Extractor (Download Below)
5.Magisk Manager latest apk.
6.Internet Connection.
7.Fastboot installed.
Procedure:
1.Extract RAMDISK.img from your downloaded firmware (or you can dump it using TWRP).
2.Transfer extracted RAMDISK.img to your phone.
3.Now open installed Magisk Manager and click install.
4.Now choose patch boot image and select the extracted RAMDISK.img.
5.It will take 5 min to download zip file and patch RAMDISK.img.
6.Patched RAMDISK.img usually stored in "sdcard/Download/patched-boot.img" or magisk manager will also guide you where the patched boot image stored.
7.Transfer the patched-boot.img to your pc.
8.Now boot your phone in bootloader mode.
9.Flash the patched-boot.img using this command
"fastboot flash ramdisk (path of patched-boot).img" without qoutes.
10.After successful flashing reboot your phone either by holding power button or by using fastboot command.
BOOM your phone is rooted now start playing with magisk modules.
Not to rain on your parade but I have a Honor 6X. And I managed to install Magisk normally. Just flash TWRP, latest Magisk and reboot. Any TWRP available for hi6250 with decryption support?
Mannan Qamar said:
Not to rain on your parade but I have a Honor 6X. And I managed to install Magisk normally. Just flash TWRP, latest Magisk and reboot. Any TWRP available for hi6250 with decryption support?
Click to expand...
Click to collapse
No not yet.
mahrtayyab said:
No not yet.
Click to expand...
Click to collapse
Why is it taking so long? Isn't anybody working on it?
Mannan Qamar said:
Why is it taking so long? Isn't anybody working on it?
Click to expand...
Click to collapse
Huawei has changed the partition scheme along with encryption method totally thats why it is taking so much time.
Good News is devs are working on it and they are hoping that we could decrypt our huawei phone very soon.
I used a different variant of twrp and flashed Magisk. twrp doesnt support OTG but the backups and restore works fine
Megan1976 said:
I used a different variant of twrp and flashed Magisk. twrp doesnt support OTG but the backups and restore works fine
Click to expand...
Click to collapse
which one? Please send xda link
https://drive.google.com/file/d/1-uYbVhzcczReoXblG2QdFGvPfJWe6Oqk/view?usp=drivesdk
On my p8 lite 2017 and p10 lite root is installed by flashing Official Magisk zip via TWRP without any extras, maybe this could work on Emui 9...
DarkJoker360 said:
On my p8 lite 2017 and p10 lite root is installed by flashing Official Magisk zip via TWRP without any extras, maybe this could work on Emui 9...
Click to expand...
Click to collapse
Brow plz help me, i have a Pra-lx2 Oreo, and i want to use your Custom Rom LOS17, can i install twrp and your Rom with Bootloader Locked?? If no, plz help me do unlock Bootloader on pra-lx2 Oreo. plz brow
Hello.
I flash OnePlus 3T stock pie 9.0.3 to (ROM) aroma pie 9.0.4 with twrp (3.2.3.1)
My mobile got brick after then i use msmdownload tool from 1.11Gb mega.nz l then i got back my phone on Marshalls mallow but when i trying to upgrade to stock 9.0.3 pie with the twrp 3.2.3.1 successful flashed the rom and reboot to system but i can boot to system 3,4 hours still loading on red circle when stock first boot logo please help me what i do i need to upgrade stock 9.0.3 pie at least instead of custom rom now im using Miui 10 in OnePlus 3T so please guide me how i can back to upgraded os because i don't want to use custom rom
zunairkh said:
Hello.
I flash OnePlus 3T stock pie 9.0.3 to (ROM) aroma pie 9.0.4 with twrp (3.2.3.1)
My mobile got brick after then i use msmdownload tool from 1.11Gb mega.nz l then i got back my phone on Marshalls mallow but when i trying to upgrade to stock 9.0.3 pie with the twrp 3.2.3.1 successful flashed the rom and reboot to system but i can boot to system 3,4 hours still loading on red circle when stock first boot logo please help me what i do i need to upgrade stock 9.0.3 pie at least instead of custom rom now im using Miui 10 in OnePlus 3T so please guide me how i can back to upgraded os because i don't want to use custom rom
Click to expand...
Click to collapse
At first use the latest TWRP 3.3.0.1
https://eu.dl.twrp.me/oneplus3/
Then try again...
Master_TC said:
At first use the latest TWRP 3.3.0.1
https://eu.dl.twrp.me/oneplus3/
Then try again...
Click to expand...
Click to collapse
You should have said "use the latest", in this case 3.3.1-0 instead
Master_TC said:
At first use the latest TWRP 3.3.0.1
https://eu.dl.twrp.me/oneplus3/
Then try again...
Click to expand...
Click to collapse
Can i use aroma 9.0.3 or OOS 9.0.3 with twrp3.3.0.1
Immortalis said:
You should have said "use the latest", in this case 3.3.1-0 instead
Click to expand...
Click to collapse
Can i use aroma 9.0.3 or OOS 9.0.3 with twrp3.3.0.1
zunairkh said:
Can i use aroma 9.0.3 or OOS 9.0.3 with twrp3.3.0.1
Click to expand...
Click to collapse
Yes you can.
The latest version is 3.3.1.0. Sorry i have mistyped.
i failed
i tried with letest twrp 3.3.1.0 recovery OOS.9.0.3 modem zip then i flash OOS9.0.3 FIRMWARE but still stuck on booting not enter in system
Master_TC said:
Yes you can.
The latest version is 3.3.1.0. Sorry i have mistyped.
Click to expand...
Click to collapse
i tried with letest twrp 3.3.1.0 recovery OOS.9.0.3 modem zip then i flash OOS9.0.3 FIRMWARE but still stuck on booting not enter in system
zunairkh said:
i tried with letest twrp 3.3.1.0 recovery OOS.9.0.3 modem zip then i flash OOS9.0.3 FIRMWARE but still stuck on booting not enter in system
Click to expand...
Click to collapse
OK you want to use the original OxygenOS 9.0.4?
Then go this way (all your data will be lost!):
1. in TWRP (3.3.1.0) delete all partitions (Dalvik, Cache, System, Data,...)
2. reboot into TWRP
3. format Data in Wipe - Format Data - type YES
4. reboot into TWRP
5. connect your phone with your computer and install full OxygenOS 9.0.4 zip (download from OP page)
6. reboot into TWRP and install magisk, if you want to keep TWRP. Else reboot into system
First boot takes 5-10 Minutes.
Thanks sir i will try and inform you if it work i will be thanks ful
Master_TC said:
OK you want to use the original OxygenOS 9.0.4?
Then go this way (all your data will be lost!):
1. in TWRP (3.3.1.0) delete all partitions (Dalvik, Cache, System, Data,...)
2. reboot into TWRP
3. format Data in Wipe - Format Data - type YES
4. reboot into TWRP
5. connect your phone with your computer and install full OxygenOS 9.0.4 zip (download from OP page)
6. reboot into TWRP and install magisk, if you want to keep TWRP. Else reboot into system
First boot takes 5-10 Minutes.
Click to expand...
Click to collapse
step 1 All partition include ( internal storage)?
Step 5 for transfer file oxygenos.zip? How to install though computer adb sideload or twrp flashing swipe
zunairkh said:
step 1 All partition include ( internal storage)?
Step 5 for transfer file oxygenos.zip? How to install though computer adb sideload or twrp flashing swipe
Click to expand...
Click to collapse
1. without internal storage (you can wipe it too, if you don't have any important data)
5. yes to transfer file or you use a sdcard. install OS in TWRP
I wiped all thing
And wiped format data and instll oxygen os 9.0.4 with magisk
Thanks ? you solve my issue
If i want to imstall aroma rom so can i do same process
?
zunairkh said:
I wiped all thing
And wiped format data and instll oxygen os 9.0.4 with magisk
Thanks you solve my issue
If i want to imstall aroma rom so can i do same process
?
Click to expand...
Click to collapse
Yes, so you can install all roms clean and without problems.
Don't forget to save your data!
Master_TC said:
Yes, so you can install all roms clean and without problems.
Don't forget to save your data!
Click to expand...
Click to collapse
Is there any method i can download miui cloud message,call history backup without install miui rom
Hey guys
I Need a Full TWRP Backup for my P8 Lite 2017 PRA-LX1C432 with all Partitions
Boot
Cache
Cust
OEMinfo (if it's PRA-LX1C432)
Data
System
Vendor
Product
Version
i hope everyone can help me
impala_x3 said:
Hey guys
I Need a Full TWRP Backup for my P8 Lite 2017 PRA-LX1C432 with all Partitions
Boot
Cache
Cust
OEMinfo (if it's PRA-LX1C432)
Data
System
Vendor
Product
Version
i hope everyone can help me
Click to expand...
Click to collapse
Did you tried this method? Hope it works
https://forum.xda-developers.com/p8...uide-brick-huawei-p8-lite-2017-maybe-t3816694
But I didn't used OT's firmware files , I used my mobile's specific files downloaded from firmware finder app ... Which you can download from Playstore