I normally use my XDAIIi as my alram clock, but this morning the alarm did not go off as normal at 05:15am
The strange part was that when I switched the XDAIIi on at 05:30am it immediately sounded the alarm.
any ideas?
try download n try any alarm software. hope it will help you.
thanks
Hi, this morning the WM alarm clock of my tytn ii failed to raise at the correct time, but finally the alarm did go off about 58 minutes later (the device was left untouched in sleep mode until that). The notification still showed the correct alarm time in the message, and the acutal time (wrong) time in header and top bar.
Never heard of this problem before, any suggestions??? Please help me to identify the problem with this "ready for business"-device (lol).
I think i remember reading something similar to this on another thread. where the problem was something to do with time sync (by activesync or network). Perhaps somebody who has had this problem can help?
Try disabling the HTC Home plugin and the Task Manager. That seems to help fix it.
I do not know if this is connected or not, but -
I have a (perhaps) similar problem with the alarm.
My alarm is set to 07:30 every morning.
A while ago, I travelled to france and adjusted the time zone by one hour. I have since returned home, but since, the alarm rings at 06:30 every morning.
The setting is still 07:30.
There is no alarm set for 06:30.
The system **** shows the correct time and the time zone is also correct.
Is it possible that 'old' and incorrect entries are stored in the registry, and trigger the alarm wrongly?
bo78 said:
Hi, this morning the WM alarm clock of my tytn ii failed to raise at the correct time, but finally the alarm did go off about 58 minutes later (the device was left untouched in sleep mode until that). The notification still showed the correct alarm time in the message, and the acutal time (wrong) time in header and top bar.
Never heard of this problem before, any suggestions??? Please help me to identify the problem with this "ready for business"-device (lol).
Click to expand...
Click to collapse
I have some problem and use another alarm proogram.
Try to use some another program like SPB Time or another.
Blacksheep said:
I do not know if this is connected or not, but -
I have a (perhaps) similar problem with the alarm.
My alarm is set to 07:30 every morning.
A while ago, I travelled to france and adjusted the time zone by one hour. I have since returned home, but since, the alarm rings at 06:30 every morning.
The setting is still 07:30.
There is no alarm set for 06:30.
The system **** shows the correct time and the time zone is also correct.
Is it possible that 'old' and incorrect entries are stored in the registry, and trigger the alarm wrongly?
Click to expand...
Click to collapse
exact same problem here (i did visit germany not france though )
does anyone have a solution without disabling things like the home plugin?
(it's not the auto change timezone/clock from sim setting as i have that before this prob occured and its still off...)
Try cleanining the notification Que using sktools or some similar program, this alarm problem is a well known bug in WM devices and has been for a long time
You may want to check your time zone is correct. Also check that the time IS NOT being updated from the network, if your cell provider has an incorrect time zone this could cause the problem.
I have been having the same problem. I can set an alarm for 8:00AM, but it will ALWAYS go off at 7:00AM. If I set it for 8:01AM, it will go off at the right time. I have no idea why it's happening and can't seem to find a solution...
Alarm Problem
I have the same problem. My alarm goes off at 5:20 a.m. every morning. I updated the TILT rom with the new updated AT&T rom. I set the alarm once for 5:20 am. After that it has gone off at that time every morning regardless of what I do to the alarm clock settings . Anyone know how to fix this problem????
cliff_lusk said:
I have the same problem. My alarm goes off at 5:20 a.m. every morning. I updated the TILT rom with the new updated AT&T rom. I set the alarm once for 5:30 am. After that it has gone off at that time every morning regardless of what I do to the alarm clock settings . Anyone know how to fix this problem????
Click to expand...
Click to collapse
I just tried SKTools from this thread recomendation. Hopefully that will work.
Hilal said:
Try cleanining the notification Que using sktools or some similar program, this alarm problem is a well known bug in WM devices and has been for a long time
Click to expand...
Click to collapse
I agrree - clean Notification Que....., BUT cleaning every week, monts ... so boring.....
stop using buged WM clock to alarm - well, how I said, use some another clock program like SPB Time or similar.
I've always had alarm clock issues with every wm device I've ever used. Either going off at the wrong time or not at all. I downloaded 3rd party gentimer and just transfer it to each new device as I get them. I know I shouldn't have to do this and MS should have a better more reliable alarm system, but for a one time charge of 12 bucks I have peace of mind and no. more dickin' with the damn oem alarm. It's worth it IMHO.
cliff_lusk said:
I just tried SKTools from this thread recomendation. Hopefully that will work.
Click to expand...
Click to collapse
SKTools did not work. My alarm still goes off at 5:20am. Anyone have any ideas on how to make this turn off?
cliff_lusk said:
SKTools did not work. My alarm still goes off at 5:20am. Anyone have any ideas on how to make this turn off?
Click to expand...
Click to collapse
What has worked for me in the past is to delete all existing timers, do a soft reset, then re-create them. In your case, I'd be tempted to change the timer, then delete it, then reset and re-enable.
Jim_R said:
What has worked for me in the past is to delete all existing timers, do a soft reset, then re-create them. In your case, I'd be tempted to change the timer, then delete it, then reset and re-enable.
Click to expand...
Click to collapse
What do you mean delete the existing timers? Where do I delete them?
I use my old Nokia N70 just because it's so pathetic that HTC or MS (don't know whose fault it is) can't fix a proper alarm.
cliff_lusk said:
What do you mean delete the existing timers? Where do I delete them?
Click to expand...
Click to collapse
Perhaps I confused you by calling the alarms 'timers'. Here's how to delete them:
Start, Settings, Clock & Alarms, Alarms tab.
To delete a previously set alarm, uncheck the checkbox, and de-select days of the week. Click Ok. Do a soft reset.
In my experiance, this will remove duplicate alarms as well.
I've tried that with the exception of removing all of the checked days of the week. I will try that and see what happens. Thanks.
My girlfriend has a problem with her Xperia X1. She had an alarm set at 6:00 AM for every weekday, but now she has a holiday she disabled the alarm. But this morning, the alarm just went off! And it seems Windows isn't 'aware' of this, because it doesn't show anything indicating the alarm. There isn't even an option to turn the alarm off.
Since this isn't the first time she has this problem with the alarm, I decided to post this question here. Has anyone else experienced this kind of behaviour? What could be wrong?
Cleaning Notification Queue
There is probably a notification stuck, somewhere.
Read this: http://forum.xda-developers.com/showthread.php?t=333521
It enables you to clean up the Notification Queue.
I got a notification that my database storage is getting low. I deleted sms messages and call logs, but the notification is still there. My phone wont scan my external sd card either: it is stuck at 0%..
I got 2.2, z4root and oclf lagfix. Can anyone tell me whats wrong? Thanks in advance.
EDIT// Now I noticed that my contacts and messages are taking 121MB/127MB, and yesterday it was only 27MB/127MB... This is seriously a bit weird...
Sent from my GT-I9000 using XDA App
Wolvyz said:
I got a notification that my database storage is getting low. I deleted sms messages and call logs, but the notification is still there. My phone wont scan my external sd card either: it is stuck at 0%..
I got 2.2, z4root and oclf lagfix. Can anyone tell me whats wrong? Thanks in advance.
EDIT// Now I noticed that my contacts and messages are taking 121MB/127MB, and yesterday it was only 27MB/127MB... This is seriously a bit weird...
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Hi Posters,
I am in the same position, changed my ring tone yeday to a normal mp3 that played through the music app no issues.
Rebooted a few times....then noticed that my device wouldnt complete the media scanning on the External SD card.
Now the phone generally lags and goes bonkers, force closes on all apps all sorts every time I put the SD card in, seems to be something to do with the database that the media scanning writes to, corrupted or something.....what is it though and how to fix!?
Any help anyone can offer us would be great.
I unidid the One Click Lag fix to try and resovle this but no help....
Greetings all.
I have two small issues and was curious if anyone else experienced them.
1) Every once in a while, I will have a missed call notification card on the watch and can't swipe it away (to the right). I can expand it up but basically can't get rid of it. A restart of the watch seems to do the trick. I've tried clearing the phone call history but that doesn't seem to help.
2) Secondly, Every once in a while I get a phantom alarm on the watch. I think it's a (watch) alarm I set a few weeks back via a voice "wake me up at 10:00am" command. Are these kept in a different spot that the normal phone alarms?
I'm almost thinking of doing a wipe of the watch and re-syncing my apps just to freshen up everything.
Thanks in advance for your thoughts.
Scott
I found the old alarm...I just wasn't looking in the right spot.
However, I still get that missed call card problem from time to time. Even swiping left and going to close "close card" doesn't work. Anyone else get this?