Related
Hey everyone,
I recently purchases a custom zagg skin and the invsibleSHIELD ,
The zaggskin is easy to put on the back of your HD2 , its a little bit smaller, but that makes the process of putting it on easier (It took me like 2 min?),
Before the invsibleSHIELD I tried various screen-protectors , but I always had bubbles or dust underneath them.
With the invsibleSHIELD I just followed instructions , and volla , no airbubles, no dust , its makes the screen even brighter.
One negative point about it, its pricey , i ordered mine during Memorial Day (50 percent off),
Regards,
PS: Sorry for my bad english
How can a cover make the screen brighter? Are these skins polarized or something? I'm curious.
All this is rubbish, I understand the need for a big silicon or hard cover to protect your phone from drops but what is the point of the invisible shield when you cant scratch the phone anyway. There is no way it can make the screen brighter, or make you see better in the sun.
Some screen protector companies even claimed that only the person looking right at the device can see the screen, so therefore if someone was trying to peak over to see what you are doing they couldn't, well I ordered that and obviously it is not true not even slightly dimmed from the sides. so don't believe everything they say.
invisible shield
i wont take the chance of scratching my screen even if its impossible
invisible shield is not only on the front but on the back too.
its less sensitive for oily fingerprints - maybe that is why it looks a little bit brighter than without. before i had it, it was difficult to see in sunlight and now its better.
plus, the device wont slip of your hand, again do to the back cover.
so, i recommend invisible shield sincerely
cheers
thumbs down
My zagg sheild pretty much rendered my HD2 useless. The screen was really desensitized way too much. I'm not surprised...the zagg shield is so thick and durable that if I didn't have to "touch use" my screen, it would have been perfect. I ended up tearing of the $20+ protector and discarding it...
unni3063 said:
My zagg sheild pretty much rendered my HD2 useless. The screen was really desensitized way too much. I'm not surprised...the zagg shield is so thick and durable that if I didn't have to "touch use" my screen, it would have been perfect. I ended up tearing of the $20+ protector and discarding it...
Click to expand...
Click to collapse
No problems here, and the screen protector isn't that thick, its just even thick like any other screen protector ,
Munto said:
All this is rubbish, I understand the need for a big silicon or hard cover to protect your phone from drops but what is the point of the invisible shield when you cant scratch the phone anyway. There is no way it can make the screen brighter, or make you see better in the sun.
Some screen protector companies even claimed that only the person looking right at the device can see the screen, so therefore if someone was trying to peak over to see what you are doing they couldn't, well I ordered that and obviously it is not true not even slightly dimmed from the sides. so don't believe everything they say.
Click to expand...
Click to collapse
The HD2 screen can be scratched, there are examples of it on this forum, just search.
Spending $10-20 on a quality screen protector is probably the cheapest insurance you could get to protect your screen if/when you scratch the protector and the scratch becomes unbearable, spend $10-20 on a new one
Though Ive not seen one before for mobile phones, there are privacy screens for laptop/desktop monitors. These screens significantly blur the image unless you are directly in front of the screen, if you tilt the screen more than 10degrees or so the screen will blur. These are used a lot in medical/financial institutions, sensitive departments within companies like HR. Ive seen these appearing on ATMs now too
I will agree there is no protector that will make your screen "brighter" that's just about impossible, anything put over the screen is actually going to attenuate any light coming though it, though it may not be perceivable. Certain protectors may eliminate screen glare, making the screen easier to see in certain lighting conditions
ohhh yeah, believe me the screen CAN be scratched! got two very nice ones to prove it. lol
d0ug said:
The HD2 screen can be scratched, there are examples of it on this forum, just search. ....
Click to expand...
Click to collapse
Well about the brighter , i have the the shield now for a week, the screen looks better because there are no fingerprints on the screen , further its scrolls smoother
Sorry but I'd stay clear from Zagg's Invisible Shiled as it is not really effective nor fully stand their claim "as advertised".
After 3-4 months of use (in tropical countries or desert areas), the sands/dirts snug into the linings, then started to peel off little by little.
Had this product on my Fuze and then my Topaz a while back, not very happy about it.
The only good things about the product is (1)fancy retail packaging, and (2)their screen protector. Sorry.
This cover is useless. I removed it after a couple of hours. What's the use of having a screen protector that doesn't cover the whole screen? Apart from the fact that it makes the screen look ugly.
erosennin said:
This cover is useless. I removed it after a couple of hours. What's the use of having a screen protector that doesn't cover the whole screen? Apart from the fact that it makes the screen look ugly.
Click to expand...
Click to collapse
It needs to sit for at least 12 or more hours to let the solution and bubbles disappear. If you had it on for a couple of hours and not days, then you did not read the instructions If applied properly you should not see it. If it looks ugly, it was not done properly or you did not let it cure long enough before using the device.
I have noticed that not all of the plastic used with Zagg products seem to be the same. I have applied one on my Tilt2 (aka. Touch Pro 2) and it did not feel like the texture of an "orange peal" like I have seen written in some reviews. I no longer have the Invisa Shield on the screen as it started to come up on the edges by the chrome phone edging causing lint, dust, etc. to collect under. I also noticed it turn a slight yellow. The colour change was odd as I don't smoke or hang out with smokers. It could be from rubbing against the lining of my leather case I kept it in (although it has a black lining).
At my work we have a Zagg promo for Apple iPads and this is where I have come across the "orange peal" texture on a few of the installs. I don't think it is due to improper install as we always use the same solution and method of install for each one.
In short:
the pros: it protects well against scratches and minimizes the look of finger prints
the cons: could gain a yellow tinge after several months, not easy to remove dust/dirt if it gets under edges, and not easy to apply first time around for most.
My advice for capacitive screens is to not spend lots on a screen protector. The cheep vinyl protectors may not look as good but will work just as well. Remember: all capacitive screens are made of glass which will not scratch under normal use. If you keep your phone in your pocket, the chances for scratching will increase as sand or tiny bits of gravel can collect in the lining and rub against the screen. Even keys can scratch if enough pressure is applied. For those who saw the YouTube HD2 scratch test, did you see how much pressure was applied to the keys, knife, and scissors? Not enough to scratch it, add enough and it will...
Dangerously said:
It needs to sit for at least 12 or more hours to let the solution and bubbles disappear. If you had it on for a couple of hours and not days, then you did not read the instructions If applied properly you should not see it. If it looks ugly, it was not done properly or you did not let it cure long enough before using the device.
I have noticed that not all of the plastic used with Zagg products seem to be the same. I have applied one on my Tilt2 (aka. Touch Pro 2) and it did not feel like the texture of an "orange peal" like I have seen written in some reviews. I no longer have the Invisa Shield on the screen as it started to come up on the edges by the chrome phone edging causing lint, dust, etc. to collect under. I also noticed it turn a slight yellow. The colour change was odd as I don't smoke or hang out with smokers. It could be from rubbing against the lining of my leather case I kept it in (although it has a black lining).
At my work we have a Zagg promo for Apple iPads and this is where I have come across the "orange peal" texture on a few of the installs. I don't think it is due to improper install as we always use the same solution and method of install for each one.
In short:
the pros: it protects well against scratches and minimizes the look of finger prints
the cons: could gain a yellow tinge after several months, not easy to remove dust/dirt if it gets under edges, and not easy to apply first time around for most.
My advice for capacitive screens is to not spend lots on a screen protector. The cheep vinyl protectors may not look as good but will work just as well. Remember: all capacitive screens are made of glass which will not scratch under normal use. If you keep your phone in your pocket, the chances for scratching will increase as sand or tiny bits of gravel can collect in the lining and rub against the screen. Even keys can scratch if enough pressure is applied. For those who saw the YouTube HD2 scratch test, did you see how much pressure was applied to the keys, knife, and scissors? Not enough to scratch it, add enough and it will...
Click to expand...
Click to collapse
How many times there have to be said that this capacitive screen is not made from GLASS, there are enough people one the web which HD2 got scratched, believe they will scratch
I have the full body zagg skin. Gotta say it's great. Simple to apply and really keeps the device from getting scratched. Even protects the corner. Don't get what the complaint above was about. It covers the screen so wtf are you talking about? Only thing I wish they'd fix is that you can't apply a skin or case over it. If you do it'll get stuck to it unless it's like a cloth case or something. Hope they fix that issue one day. Still not bad, plus I did like the OP and ordered on Memorial Day for like 12 dollars.
How does it cover the Back ?
in 3 parts does it ?
thanks
ilordvader said:
How does it cover the Back ?
in 3 parts does it ?
thanks
Click to expand...
Click to collapse
ya, but it does not cover 100 percent
Jalaluddin said:
ya, but it does not cover 100 percent
Click to expand...
Click to collapse
Thanks for reply
Can someone post some pics
front & back to get a idea how it looks
Thanks
Glue softens
I have to say I was happy for around 5 months - until it started to get warmer. Then the glue started to soften and smear out from under the shield. It made the screen look a bit of a mess and ultimatly the corners started to flap about because all of the glue had gone. Contacted Zagg customer support and they admitted this can happen when warm and humid. They suggested I use their replacement service but why should I pay around 6€ for postage in both directions if as soon as it gets warm it will be a mess again. Not very impressed. I'll stick to the electrostatic screen shields in the future. Can anybody recommend one?
So I picked up a screen protector on Amazon by ArmorSuit... it seemed to have solid reviews and I heard reports of great customer service, so I spent the 20 bones to pick one up. I just now applied it, and it went on well without a hitch. Since it was a wet protector and majority of my screen protector experience was with dry ones, I watched the YouTube video and also thoroughly read the instructions. Last thing I wanted to do was install a wet protector incorrectly and mess up my device.
Once done I checked out the finish. Despite the fact it's been 20 minutes and not 12-24 hours like they say to let it sit, I noticed lots of tiny scratches on it, which definitely looked like it was from the applicator card. What baffles me more is I have a microfiber cloth that came with the kit that I was wiping the screen off with... I noticed even swirly scratches after I was done, yet this microfiber cloth has nothing in it whatsoever!
Er, uh. Has anybody ran into anything like this with screen protector application?
Despite this, I'm still relatively happy with the screen protector as it fits perfectly and was very quick and easy to install. That being said, I'm still a little disappointed in what I'm seeing here, but I'd still trade hairline scratches that aren't that visibleat all (and not visible whatsoever with the screen lit up) versus air bubbles and dust pockets which clearly are visible regardless... which is almost always the case with dry protectors... Don't get me wrong, it's not like it's a series of key-gouging lines here, but when video installation guide shows the tilted tablet glaring off of the ceiling light to show it is 100% smooth and flush with a perfect glass-like surface, that's where I can see these very fine marks.
Maybe, just maybe, this is some sort of epic self-healing screen protector that'll remove those blemishes over the next day as it sits. :laugh: Yes, just maybe.
EDIT, er... uh... under the bulleted list of features I found these two items that I may have overlooked when I first purchased it:
Self-healing technology , Military grade material engineered for your specific device
ArmorSuit Lifetime Replacement Warranty *Made in the USA*
lol????
My ArmorSuit came with a nice horizontal scratch in it and these visible shallow 'gouges'. I'm guessing from the installation card. I'm getting rid of it as it just doesn't look clean. Looks like a thin slab of rubber and not perfectly flat like the glass. YMMV though as I know I didn't install it Grade A, but still, I can't imagine that this screen protector can look or feel like glass.
Part of me like the feel of these wet protectors, but it does feel unnatural and sort of tiring to use. I opted for the 3-pack of CrazyOnDigital (clear) protectors. I figure I will mess up 1, get 1 right, and keep 1 for next year.
For installing via wet method (sounds dirty no? lol) you have to get almost everything but the device "wet". That includes your fingers and the screen protector (both sides) itself and also the squeegee or card or whatever you call it...
I have seen what is called 'burn' marks if not properly wet. Sucks I know! But The wet products in my experience are always great when finally dry. I have the XO skin and it's about totally dry. Looks great IMO.
"burn marks" sounds about right
kpjimmy said:
For installing via wet method (sounds dirty no? lol) you have to get almost everything but the device "wet". That includes your fingers and the screen protector (both sides) itself and also the squeegee or card or whatever you call it...
I have seen what is called 'burn' marks if not properly wet. Sucks I know! But The wet products in my experience are always great when finally dry. I have the XO skin and it's about totally dry. Looks great IMO.
Click to expand...
Click to collapse
I'm not sure how much more wet you can get a screen protector when it's already dripping, which was the status of it when I placed it on the screen. Likewise, I did wash my hands just prior and also had my hands both completely saturated in the provided fluid.
Burn marks sounds like some food for thought, but I'm unsure how you can get a burn mark from a microfiber cloth when I'm wiping the screen off in a circular motion. I mean, I didn't attach it to a circular sander or anything...
So in the event this magical self healing thing doesn't live up, what other screen protector would you guys recommend? I definitely want to go with a wet application, as I'm already able to tell a world of difference, but I'm a little dissatisfied with how incredibly sensitive this protector is to scratches. It's great you can take a dremel to it and it still protects the actual tablet screen but when a microfiber cloth scratches it I can't say it impresses me.
EDIT - Just got an email response from them minutes ago. The bulk of the message is pasted below:
Regarding the marks on your screen protector:
Any filmy marks, air bubbles, swirl marks or haze underneath the screen protector is due to the solution, which can take up to 2 weeks to go away. It typically doesn't take this long, but it will eventually go away because the material is designed to be breathable. This will release any trapped solution.
Regarding the scratches on your screen, here is a quick and easy fix.
1. Please turn off your device.
2. With your screen protector still on your device, spray 1 pump on the screen protector and then spread the solution evenly with the included microfiber cloth.
3. The scratches should then disappear soon, within a few days at the very most because the material is self-healing.
Click to expand...
Click to collapse
I guess I'll have to be a little more patient and see what happens.
Not sure why they don't just put this in the instructions, but here's a trick:
When you're pushing the bubbles out, put the piece of plastic that you peeled the protector off of over the screen. Don't ever use the squeegee directly on the screen.
slack04 said:
Not sure why they don't just put this in the instructions, but here's a trick:
When you're pushing the bubbles out, put the piece of plastic that you peeled the protector off of over the screen. Don't ever use the squeegee directly on the screen.
Click to expand...
Click to collapse
I thought the same thing, but once I realized that the microfiber cloth was giving swirl marks, that whole premise behind that idea kind of crumbled. If a microfiber cloth will legitimently give this screen protector swirl scratches from wiping it clean, then that's pretty fail.
That being said, I'm remaining quite optimistic about this "self healing" thing. Maybe I will see them slowly disappear? Who knows. It is a little more comforting knowing they have a lifetime guarantee, but we'll tackle that conversation when/if it ever becomes necessary. At any rate, I keep reminding myself - at least the screen protector still looks 1000% better than any dry screen protector AND it's protecting the screen in the process. :good:
cfn87 said:
My ArmorSuit came with a nice horizontal scratch in it and these visible shallow 'gouges'. I'm guessing from the installation card. I'm getting rid of it as it just doesn't look clean. Looks like a thin slab of rubber and not perfectly flat like the glass. YMMV though as I know I didn't install it Grade A, but still, I can't imagine that this screen protector can look or feel like glass.
Part of me like the feel of these wet protectors, but it does feel unnatural and sort of tiring to use. I opted for the 3-pack of CrazyOnDigital (clear) protectors. I figure I will mess up 1, get 1 right, and keep 1 for next year.
Click to expand...
Click to collapse
I ordered the exact same 3-pack and I have to say they're great. Got it perfect on the first try and it looks crystal clear. It looks a lot better than those $10-$20 dollar protectors out there.
Sent from my Nexus 7 using xda premium
From the In1 website:
"Intelligent impact protection technology is constructed from combination of larger entities called "Supramolecular" which are made to assemble themselves at the moment of impact."
On to the review:
My phone had been rocking the stock factory installed screen protector. I ripped it off a couple days ago because i was tired of wiping fingerprints off it. I would have been perfectly happy leaving the screen naked if it weren't for the fact that I almost dropped my phone almost immediately after I took the first protector off. So here we are.
Application was as easy as you'd expect. Use the included stickers as hinges, peel tab A, drop into place, peel tab B. In spite of all my care and caution, I still ended up with a weird little formation of tiny bubbles in one little area, but it's not really obvious unless the screen is off. They ended up going away after a day or two. As this isn't tempered glass there is no dot matrix and it has full adhesion. Best of all, no damn rainbow in the middle of the screen.*
The in1 Nano Shield is smaller than the factory installed screen protector. It doesn't cover the entire width of the screen. You know the couple millimeters that get covered by the black border of the new curved Oneplus TGP? Thats about the same bit left completely uncovered by this product. Lengthwise it has cutouts for the fingerprint sensor, camera and earpiece. As such this should work with any and every case.
Slightly skinny size notwithstanding, I'm otherwise impressed with the overall look and feel. It's no tempered glass, but it feels a lot better than any other plastic screen protector I've had on previous phones. Colors are nice and vivid, glare under bright light is about the same as the naked gorilla glass.
I'm not sure what else there is to say about this particular product. I can't really judge if it's worth the money since it's real value is supposed to be in its resilience. While it certainly feels resilient, I'm not about to perform any drop or scratch tests on it. If I ever do accidentally drop it, or if it ever gets hit with a ball-peen hammer, ill be sure to update with the results. In the meantime the hunt for a quality edge to edge protector goes on.
http://imgur.com/9oM56nW
http://imgur.com/tG5piHi
http://imgur.com/WIBdJag
http://imgur.com/J5LtJjv
https://imgur.com/IA0OGWh
Hi, are you able to post another picture of your OP3?
wqwave said:
Hi, are you able to post another picture of your OP3?
Click to expand...
Click to collapse
You can see some pics in this little review on Amazon....
https://www.amazon.com/gp/customer-...f=cm_cr_arp_d_rvw_ttl?ie=UTF8&ASIN=B01KP8BYOC
I'll put some pics up soon.
crisgen said:
You can see some pics in this little review on Amazon....
https://www.amazon.com/gp/customer-...f=cm_cr_arp_d_rvw_ttl?ie=UTF8&ASIN=B01KP8BYOC
Click to expand...
Click to collapse
Lol, yeah. Those are my pictures from my review.
Following up - i took this off today and put on tye Orzly pro-fit. I just couldn't reconcile the fact that it left a few mm of the display completely uncovered. The In1 isn't worth the money. If they dropped the price, maybe it would be... But $20 US is too much.
Just received mine (along with Ultimate Shield Premium Tempered Glass actually) and have to admit I'm quite happy with that. That's after giving up with TGSP.
Was a little concerned at the beginning as it had an odd "rainbow noise" right after applying it, but after having allowed it to settle that's absolutely invisible. I still managed to allow a couple bits under the film, but that was my own fault !
Of course that's not going to provide the same level of protection of a TGSP but I'd say 5T screen is strong enough and it'll still provide some level of protection against day to day scratches and normal shocks.
I'll see how it goes after a few weeks of use but, again, first impression is more than positive (so far!).
M!
maddler said:
Just received mine (along with Ultimate Shield Premium Tempered Glass actually) and have to admit I'm quite happy with that. That's after giving up with TGSP.
Was a little concerned at the beginning as it had an odd "rainbow noise" right after applying it, but after having allowed it to settle that's absolutely invisible. I still managed to allow a couple bits under the film, but that was my own fault !
Of course that's not going to provide the same level of protection of a TGSP but I'd say 5T screen is strong enough and it'll still provide some level of protection against day to day scratches and normal shocks.
I'll see how it goes after a few weeks of use but, again, first impression is more than positive (so far!).
M!
Click to expand...
Click to collapse
Do you have a link??
Amd4life said:
Do you have a link??
Click to expand...
Click to collapse
https://www.amazon.co.uk/gp/product/B077T4PMSB/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Do u have a orange peel effect?
Also, how smooth is it to glide across the surface compared to tgsp? I remember when invisible shield came out 10 years ago, it's surface was like gliding your finger across a grippy textured surface. It was unpleasant.
lemonspeakers said:
Do u have a orange peel effect?
Also, how smooth is it to glide across the surface compared to tgsp? I remember when invisible shield came out 10 years ago, it's surface was like gliding your finger across a grippy textured surface. It was unpleasant.
Click to expand...
Click to collapse
It has the very, very smallest amount (to me) orange peel effect. But certainly not a deal breaker. I came from several TGSP and its only now that I'm finally happy with my screen protection! And in terms of the surface, I also don't find it to be grippy. Certainly worth trying out to see if it's for you. Though be sure to use the 'steamy bathroom' technique as it really does help prevent any dust getting trapped under there when installing. Lastly, I left it for 24 hours before putting the case on (my spigen makes it lift up so using another one) and it's true that any haze dissappears after this time too. Other than some slight lift up, it's pretty much perfect
maddler said:
https://www.amazon.co.uk/gp/product/B077T4PMSB/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I'm thinking of getting these as I have just cracked my 3rd official tgsp
I find the official tgsp to be extremely smooth and resistant to finger prints and dust pick up, how would you say these film protectors feel in comparison?
Also i found the stock film protector was a mega dust magnet, it drove me insane constantly wiping the phone, any dust issue with these protectors?
yes, dust and fingerprints were a concern for me as well. On that regard I'd say that's doing quite well after a few days on usage.
I had a few bits under the film, while applying, which are causing some "disturbance" along the external borders. But, as I said, that's totally down to my chronic inability to apply screen protectors.
That's absolutely smooth under my fingers and. Not as smooth as a glass screen protector maybe, but still great.
I think I'm going to try to remove and wash it at some point, to get rid of those bits or buy the same one again at some point.
maddler said:
yes, dust and fingerprints were a concern for me as well. On that regard I'd say that's doing quite well after a few days on usage.
I had a few bits under the film, while applying, which are causing some "disturbance" along the external borders. But, as I said, that's totally down to my chronic inability to apply screen protectors.
That's absolutely smooth under my fingers and. Not as smooth as a glass screen protector maybe, but still great.
I think I'm going to try to remove and wash it at some point, to get rid of those bits or buy the same one again at some point.
Click to expand...
Click to collapse
...be careful if deciding to remove and clean, as I read somewhere that whilst it is possible, it may stretch it and then not fit as good when reapplied...
If the bits bother you that much, buy a new one and indeed do it in a steamy bathroom - mine is near perfect and only got a couple of specks of dust around the edge but only where my SPigen case lifted it up
yeah, I'll see how it goes over the next few days. There's a good chance that one of the bits close to centre of the scree is gonna cause the film to break at some point (being a little raised).
I'll see how it goes. In case it gets damanged I'll get a new one.
At this point I'm quite convinced this is the best solution to protect the screen (the offset around the screen even with the new official TGSP annoys me too much!).
Thanks for your hints.
If you do can you post a video and the steps you use. I've heard the screen is much better without it but I'm extremely nervous about removing it.
StormCell said:
If you do can you post a video and the steps you use. I've heard the screen is much better without it but I'm extremely nervous about removing it.
Click to expand...
Click to collapse
There are several videos on YouTube. It looks really easy to do.
Edit: here's a couple of them:
https://youtu.be/AMjDBKvsWvE
https://youtu.be/FDfTzFznJa4
anuraj1 said:
There are several videos on YouTube. It looks really easy to do.
Edit: here's a couple of them:
https://youtu.be/AMjDBKvsWvE
https://youtu.be/FDfTzFznJa4
Click to expand...
Click to collapse
Did you do it?
StormCell said:
Did you do it?
Click to expand...
Click to collapse
My Fold2 doesn't arrive until tomorrow. I haven't decided if I'm going to remove it yet since i haven't seen it in person.
I did it... It was very easy.. The screens feel better but it looks the same to me... If you don't like the feel of the screen protectors than just remove it... Do it slow and take your time but it very easy to do.. it also doesn't collect as much fingerprints on it now...
I bit the bullet and removed the screen protector from the inside screen. It was extremely easy, I just used a sheet of paper to gently pull away from the camera cutout enough to grasp it and pull off as easily as any other protector.
I can confirm the screen feels fantastic now, instead of a rubbery sticky feeling to that of glass. It also no longer attracts fingerprints. It seems more responsive and sharper.
I think as long as you take care not to get anything abrasive on the screen it will remain in good condition.
.
I scratched the screen protecton with my finger nail do you think that without the protection the screen is also so delicate?
nereya82 said:
I scratched the screen protecton with my finger nail do you think that without the protection the screen is also so delicate?
Click to expand...
Click to collapse
YES its just as delicate as the Fold1 inner screen. ( See link to video in Indian forum.)
WHY are folks so keen to remove the factory fitted film so soon after purchase of a $2000 device?
By all means remove it (and replace it) after 6 months if it has picked up a scratch or two but until then LIVE WITH the fingerprints magnet and let the film protect the expensive and delicate main screen underneath it.
dezborders said:
YES its just as delicate as the Fold1 inner screen. ( See link to video in Indian forum.)
WHY are folks so keen to remove the factory fitted film so soon after purchase of a $2000 device?
By all means remove it (and replace it) after 6 months if it has picked up a scratch or two but until then LIVE WITH the fingerprints magnet and let the film protect the expensive and delicate main screen underneath it.
Click to expand...
Click to collapse
~
I understand what you are saying but the original Fold did not have this factory fitted screen protector. I read a lot of people's experiences with that device, stating that the screen is more durable than first anticipated and no real reports of extensive problems relating to scratches over the many months of use. The Fold 2 has a more durable construction than that and I am confident it will live up to the same expectations, provided you take a little more care overall than you would a regular phone. Also someone mentioned that the screen protector hardly protects it anyway, you can still dig a fingernail into it without too much pressure.
The rubbery sticky texture of the screen protector left me feeling disappointed when using the inner screen, and constant smudges (which weren't quick and easy to remove compared to a glass screen) that impaired the clarity and sharpness of the display. So after careful thought I removed it, and now it just feels like a proper glass screen and fingerprints are no longer an issue. The experience is vastly improved and I don't feel that the screen is vulnerable either.
If it turns out that the screen suffers from damage in the next 12 months, then I will get it replaced for £100 and then consider keeping the protector on. But for now I am more than happy with the reasons for removing it.
~
For me, I found myself applying greater pressure when cleaning the fingerprints and smudges on the installed screen protector, and cleaning it more frequently. That continual process is surely more detrimental to the device than worrying about the possibility of a scratch. A quick swipe with a microfiber cloth now takes care of things and puts my mind at ease.
With the addition of the little feet on the bezel of the inner screen, there is a much lessened chance of debris getting caught between the folded screen.
I'm with apprentice on this one and agree pretty much down the line. I asked this question on the OG thread as did another fellow and there was not one report of problems with screen scratching and all reported it had proved more durable than expected in reference to the entire device.
I've got the screen replacement in one year if it proves to be worse than expected. If I need to I'll look at getting back into a protector after the replacement should it be needed. In the end of it for me the only thing crazier than spending 2k on this device is spending 2k on this device and not enjoying it. The screen protector was detracting from my experience enough for me to want it gone and having removed I now know more than I realized. I'm not going to cheer-lead on this one but if a person was seriously bothered by the thing as I was then I would certainly recommend giving it a try while you still have your cheap out with the screen replacement.
So this afternoon I opened up my ZF2 and I saw 2 big bubbles underneath the screen protector. I tried to squeegee them out but to no avail. I wasn't planning on removing the screen protector but this point I had no choice. Used my ifixit spudger right at the selfie camera spot and it came up very easy. It does feel and look much better I must admit. I still have the front screen protector still on and I probably won't take it off anytime soon. Then again, on my S10e I still ahve the factory screen protector on and it still looks great.
https://imgur.com/gallery/Fg388lo
I purchased the SaharaCase protector from bestbuy as well as the Orzero 2 pack from Amazon. These are the exact same with a few caveats. They are as follows :
Best Buy Sahara
-29.99
-1 Front protector
-1 Back protector with spine cover
-1 Inside protector
Amazon Orzero
-Price 11.99
-2 front protectors
-2 inside protectors
The spine isn’t enough to justify the more than 2.5x in price. I have a Dbrand skin on the back, so the back cover was useless. For me the Best Buy option is a no go. Let me know if you have more questions or are looking for more pictures.
UPDATE :
I went ahead and applied the inner screen protector. I like the way it feels over the original. It’s smoother and closer to a glass feel. I’m waiting a full day to ensure that the micro bubbles disappear. If they do, then Orzero is a MAJOR MAJOR MAJOR GO. 3 Majors.
UPDATE 2:
It has been less than 24 hours and I want to provide an update...
THIS SCREEN PROTECTOR IS ALMOST PERFECT!!! It is very smooth to the touch. Almost all of the imperfections from my install are gone. There are 3 small bubbles that I’m waiting to disappear, but they have already shrunk. I think anyone looking for an upgrade over the default protector will be well served to grab a few of these. I say a few because it might take a few attempts to get it right, but at 11 dollars its worth it. Good luck everyone and let me know if you have any other questions.
There was a bubble and what looked like a small bit of dirt under the factory screen protector so I removed it. It was really easy to do and the screen feels great. I had the F1 which never had a screen protector and never had any issue with it so I think the F2 will be the same without it.
dezborders said:
YES its just as delicate as the Fold1 inner screen.
Click to expand...
Click to collapse
Did you own the OG Fold? I did. The inside screen was far from fragile. Granted I take really good care of my device but the inside screen looked new after 8 months of use. I hate the screen protector Samsung used on the inside screen of the Fold 2. It's hazy, tacky to the touch, and a fingerprint magnet. I'm taking it off it's just a matter of when.
Any updates on this? How's the inner screen holding up for those of you that removed the inner screen protector?
I've had my phone for a week and really don't like the feel and smudginess of the inner screen protector and thus really want to peel it off.
Also, if appreciate if those of you who removed it could make a comment about how you handle your devices - ie. do you baby it or treat it more or less like any other phones?
Keeping mine on for now, I actually don't mind the feel of it and like the idea of the extra protective layer. Just waiting on cases to become available and ill be happy.
Martin5000 said:
Any updates on this? How's the inner screen holding up for those of you that removed the inner screen protector?
I've had my phone for a week and really don't like the feel and smudginess of the inner screen protector and thus really want to peel it off.
Also, if appreciate if those of you who removed it could make a comment about how you handle your devices - ie. do you baby it or treat it more or less like any other phones?
Click to expand...
Click to collapse
Zero issues here... No regrets whatsoever. Feels, looks so much better than that rubbery crap it came with. Does make me feel a bit more cautious of course, but not enough to detract from normal usage and showing it off.
acshulk said:
https://imgur.com/gallery/Fg388lo
I purchased the SaharaCase protector from bestbuy as well as the Orzero 2 pack from Amazon. These are the exact same with a few caveats. They are as follows :
Best Buy Sahara
-29.99
-1 Front protector
-1 Back protector with spine cover
-1 Inside protector
Amazon Orzero
-Price 11.99
-2 front protectors
-2 inside protectors
The spine isn’t enough to justify the more than 2.5x in price. I have a Dbrand skin on the back, so the back cover was useless. For me the Best Buy option is a no go. Let me know if you have more questions or are looking for more pictures.
UPDATE :
I went ahead and applied the inner screen protector. I like the way it feels over the original. It’s smoother and closer to a glass feel. I’m waiting a full day to ensure that the micro bubbles disappear. If they do, then Orzero is a MAJOR MAJOR MAJOR GO. 3 Majors.
UPDATE 2:
It has been less than 24 hours and I want to provide an update...
THIS SCREEN PROTECTOR IS ALMOST PERFECT!!! It is very smooth to the touch. Almost all of the imperfections from my install are gone. There are 3 small bubbles that I’m waiting to disappear, but they have already shrunk. I think anyone looking for an upgrade over the default protector will be well served to grab a few of these. I say a few because it might take a few attempts to get it right, but at 11 dollars its worth it. Good luck everyone and let me know if you have any other questions.
Click to expand...
Click to collapse
The Orzero got terrible reviews on Amazon. Most say it's horrendous. You really like it?
Did you install over the stock screen protector?
dezborders said:
YES its just as delicate as the Fold1 inner screen. ( See link to video in Indian forum.)
WHY are folks so keen to remove the factory fitted film so soon after purchase of a $2000 device?
By all means remove it (and replace it) after 6 months if it has picked up a scratch or two but until then LIVE WITH the fingerprints magnet and let the film protect the expensive and delicate main screen underneath it.
Click to expand...
Click to collapse
+1:good: