Whitestone Dome CS Lacking - Samsung Galaxy Note 8 Accessories

I just wanted to share my thoughts and experience with the Whitestone Dome Glass for the Note 8. I have installed a few of these things on Note 8's for my friends and I. With the exception of the tray lifting up in the middle where it comes together and the glass slipping between on my first install I can say the product installs very smoothly. Two of my installs have resulted with issues with the glue on the edges collecting dust/dirt and when you try to get it off the edge (since it isn't rounded) looks like utter crap. I am talking TWO absolutely perfect installations. One of which developed a lifting edge on the lower right side which has tiny bubbles. Keep in mind one of these installations is with a case that allows more than enough room (tech21 evo tactical) and the other with no case. I have contacted Whitestone via their email, via PM here on XDA and the on site contact form via their website. I have gotten ZERO reply. I want this product to be work. I really do but I think some issues need to be addressed such as rounding the edges and maybe the glue or the light not curing the glue enough. After my experience, I have to question the customer service of this company. I am about to contact the place I purchased them from to see if they can do anything. I have attached the same pictures I sent to whitestone for everyone to see. The whole edge around the whole glass looks that way now. Maybe whitestone will see this and actually do something.
Update: On one of the installs it started bubbling on one edge and looked horrible. I was able to remove the glass with little or no effort. All in one piece took less than 30 seconds. There is definitely an issue with either the uv glue, the uv light, or both. I also notice rough edges on the glass itself. This in itself promotes the crappy look on the edge when the dirt mixes with the glue. Step up Whitestone.

This why I waited on these, will see how they handle this.
Sent from my Galaxy Note8 using XDA Labs

Hello iowamoe300!
This is Whitestone. Thanks for contacting us.
I am so sorry that I have reached you late. We are currently working on ways for faster response on the online community but as of right now, contacting the place where you bought the product is the best way to reach us.
Now that I have heard you, we would like to help you. I will respond your PM immediately.
I am so sorry about not being able to hear you, and thanks for not giving up on contacting us!

Whitestone Dome Glass said:
Hello iowamoe300!
This is Whitestone. Thanks for contacting us.
I am so sorry that I have reached you late. We are currently working on ways for faster response on the online community but as of right now, contacting the place where you bought the product is the best way to reach us.
Now that I have heard you, we would like to help you. I will respond your PM immediately.
I am so sorry about not being able to hear you, and thanks for not giving up on contacting us!
Click to expand...
Click to collapse
Thank you for the reply finally. I did pm you back waiting for a response. Also waiting for a response from mobilefun.com where I purchased them from.
Update: Whitestone has contacted me and is addressing the issue at hand. I will let people know how this goes and update accordingly.

iowamoe300 said:
Thank you for the reply finally. I did pm you back waiting for a response. Also waiting for a response from mobilefun.com where I purchased them from.
Update: Whitestone has contacted me and is addressing the issue at hand. I will let people know how this goes and update accordingly.
Click to expand...
Click to collapse
Thanks for sharing. I ordered from Amazon, but haven't installed it yet. I'm thinking of returning it....

Following this as I purchased the Whitestone Dome for my Note 8 also, It looks like it installed fine without any bubbles, but we will see.

I love how some companies don't respond unless you call them out publicly.

Kawaisa said:
I love how some companies don't respond unless you call them out publicly.
Click to expand...
Click to collapse
Agreed. I would recommend sticking with Amazon on this one as you are always covered with them. I am going to re-install a dome glass again on the Note 8 and document on this thread the phases as it gets what is almost like a "halo" from the dirt on the edge. Some may not have a problem with the look. I however think it looks horrible.

I had no issues at all with being a first time user of the product. Other than the price, seems to be the best thing out there for our screens. I guess you pay for what you get. I did have some glue residue in the top right hand corner, but the alcohol pad took care of that with not problems. I did happen to get one bubble in the bottom left corner, but imma try not to get all bent over it...as OCD as I am, just shows it's not too bad of a bubble. Just hoping I never have to see if its durable enough for a drop.

It seems that all screen protectors for these types of screens are iffy if you dont put them on PERFECT. It bums me out because I spent $20 on my first screen protector (not this one) and it slid right off... The middle of the screen protector was all dried up and had no glue on it. I probably can blame myself for a bad install, but Ive seen many people complaining about this type of issue.. I'm probably gonna try this one out here soon and see if it works well. What cases are compatible with this protector? I have a spigen tough armor atm and it seemed to try and peel the corners off a tad on my last protector...

Biff627 said:
It seems that all screen protectors for these types of screens are iffy if you dont put them on PERFECT. It bums me out because I spent $20 on my first screen protector (not this one) and it slid right off... The middle of the screen protector was all dried up and had no glue on it. I probably can blame myself for a bad install, but Ive seen many people complaining about this type of issue.. I'm probably gonna try this one out here soon and see if it works well. What cases are compatible with this protector? I have a spigen tough armor atm and it seemed to try and peel the corners off a tad on my last protector...
Click to expand...
Click to collapse
I am successfully using the Samsung OEM clear back cover. Does not interfere with the Whitestone, which is work well without any bubbles after 2 days.

I too am a bit dissatisfied with the white stone protector as it went on absolutely perfect until I stuck it in my pocket and pulled out a protector full of fuzz stuck around the edges. After trying to clean it up the edges look rough and it created a halo effect from tiny bits of glue rubbing oiut from the very edge. I also agree the edges need to be rounded and polished. If the glue wasn't rubbery and was more of a solid it would eliminate the dirt and lint issue

Biff627 said:
It seems that all screen protectors for these types of screens are iffy if you dont put them on PERFECT. It bums me out because I spent $20 on my first screen protector (not this one) and it slid right off... The middle of the screen protector was all dried up and had no glue on it. I probably can blame myself for a bad install, but Ive seen many people complaining about this type of issue.. I'm probably gonna try this one out here soon and see if it works well. What cases are compatible with this protector? I have a spigen tough armor atm and it seemed to try and peel the corners off a tad on my last protector...
Click to expand...
Click to collapse
Since every case is different and every screen protector is different it is a lottery. Unless you go with the Whitestone Dome Glass there is a list of compatible cases just watch the vids on this youtube channel https://www.youtube.com/channel/UCewzyJMZtNFqESxXZZgv__g
From my experience here are the ones I have tried so far and they fit fine: tech21 evo check and evo tactical. Any of the caseology cases. I have a UAG Monarch on order and that is supposed to fit as per the video Gravx made but it is very close. I have a perfect install on my dome glass so it should.

Here are a few pictures of an absolutely perfect install. No bubbles, perfect placement, etc. Pay attention to the edges in particular. Especially at the bottom and left hand side. That is where the glue under the screen edge is now gone from cleaning it up. You can see little balls of glue all over in different spots. Cleaning those up will result in the same halo look everywhere. This is after just a few days.
Whitestone has been at least acknowledging me since I went public. They are willing to address the issue have been helpful now. The original place I purchased from has terrible communication. What I really want is a way to get the edge clean after installing so this halo doesn't happen. It may be that we just have to leave it alone and have a crummy looking edge. Or just let it "wear" off? I think that is what I will try next.

@Whitestone Dome Glass also doesn't wanna reply to my email

winhhh said:
@Whitestone Dome Glass also doesn't wanna reply to my email
Click to expand...
Click to collapse
Hello there!
I am so sorry about that. We will reply ASAP.
It has been a long Korean holiday and we have not been able to help much.
We will get back to you very soon.

The Whitestone Dome works perfectly if you can follow directions. I have done 3 of these now (S7 edge, S8 plus, and Note8) and they all came out perfect! If someone is on the fence do to the negative reviews, just go ahead and get it. Apparently, many people try to blame their own mistakes on the company. You just have to take your time and read the instructions. I just hope that Whitestone continues to make these as it is the only protector that fits on curved displays (all companies seem to be going to the curved edges it seems).

Whitestone Dome Glass said:
Hello there!
I am so sorry about that. We will reply ASAP.
It has been a long Korean holiday and we have not been able to help much.
We will get back to you very soon.
Click to expand...
Click to collapse
I also contacted you through private message and also through Facebook Messenger with no response..

I actually messed up my first install and had to clean all the glue off my phone and the screen protector before trying again (it didn't drop properly onto the face of the phone during installation), but the second time was perfect. This is by far the best screen protector I've ever used - the s-pen glides so smoothly across it.

iowamoe300 said:
I just wanted to share my thoughts and experience with the Whitestone Dome Glass for the Note 8. I have installed a few of these things on Note 8's for my friends and I. With the exception of the tray lifting up in the middle where it comes together and the glass slipping between on my first install I can say the product installs very smoothly. Two of my installs have resulted with issues with the glue on the edges collecting dust/dirt and when you try to get it off the edge (since it isn't rounded) looks like utter crap. I am talking TWO absolutely perfect installations. One of which developed a lifting edge on the lower right side which has tiny bubbles. Keep in mind one of these installations is with a case that allows more than enough room (tech21 evo tactical) and the other with no case. I have contacted Whitestone via their email, via PM here on XDA and the on site contact form via their website. I have gotten ZERO reply. I want this product to be work. I really do but I think some issues need to be addressed such as rounding the edges and maybe the glue or the light not curing the glue enough. After my experience, I have to question the customer service of this company. I am about to contact the place I purchased them from to see if they can do anything. I have attached the same pictures I sent to whitestone for everyone to see. The whole edge around the whole glass looks that way now. Maybe whitestone will see this and actually do something.
Update: On one of the installs it started bubbling on one edge and looked horrible. I was able to remove the glass with little or no effort. All in one piece took less than 30 seconds. There is definitely an issue with either the uv glue, the uv light, or both. I also notice rough edges on the glass itself. This in itself promotes the crappy look on the edge when the dirt mixes with the glue. Step up Whitestone.
Click to expand...
Click to collapse
I would have to agree as well....I had to order 2 separate orders, because the first one came damaged. Then on the second attempt, my screen bubbled like crazy. I wrote CS. And they wanted pictures....well I of course did what I could to clean up the phone immediately. And didn't think I would need pictures. They sort of gave me, "ohh well". You would think for 50 bucks they would at least provide 2 glasses.

Related

Anyone going to go bare without a screen protector?

I pre ordered my note 8 with Verizon and it came in yesterday!
I have the spigen kick stand case on it now. Got it from Amazon prime for 17 bucks and it's great. Makes the phone easier to handle.
I have the cheap plastic screen protector that came on the phone in the box. Really can't decide on a screen protector. I hate the wet application ones and the dry adhesive tempered glass always bubble. Thinking about going raw....any one else?
I'm supposed to get mine tomorrow but none of my accessories are here and I ordered the phone after the accessories. I wouldn't do it only because of some of the complaints of the s8 and scratches on the screen. There's some screen protector that I'm gonna try that is supposed to be a hybrid between regular protectors and tempered. Hopefully I can order that soon but I'm gonna have to use the one in the box or a temporary tempered glass on it
Sent from my SM-N900V using XDA Free mobile app
Gynomagick said:
I pre ordered my note 8 with Verizon and it came in yesterday!
I have the spigen kick stand case on it now. Got it from Amazon prime for 17 bucks and it's great. Makes the phone easier to handle.
I have the cheap plastic screen protector that came on the phone in the box. Really can't decide on a screen protector. I hate the wet application ones and the dry adhesive tempered glass always bubble. Thinking about going raw....any one else?
Click to expand...
Click to collapse
I am,in place of a screen protector,I'm using a liquid sealer.
Here's one that's relatively inexpensive:
https://www.walmart.com/ip/NanoBlot-Liquid-Screen-Protector-Phone/165968396
https://www.walmart.com/ip/NanoBlot-Liquid-Screen-Protector-Tablet/112875380
And another that costs a bit more,but,good for several applications:
https://www.nanoflowx.com/spraygard
http://www.ebay.com/itm/Nanoflow-X-...tector-PROTECTS-UP-TO-16-PHONES-/172590962858
Do these sealers work?
That's debatable,but,I've been using several different brands for about two years & while it is impossible to prove a negative I haven't had a single blemish on any of my phones for 2+ years.
Do not mistake this stuff as an equal replacement for a screen protector,it's merely providing scratch resistance,nothing in regards to breakage.
I don't recommend these sealers to everyone,especially to those who are prone to exposing their phones to scratching (using the phone w/dirty fingers/exposed to the elements/dropping/typically careless in regards to pocketing/pursing with items that may scratch on a regular basis,etc...)
I don't baby my phone,but,I do take care to keep it in a pocket holster while @ work & in a neoprene sleeve most other times.
For me,a screen protector is not necessary,so,I use a sealer for added protection against scratching.
Some think they're snake oil & TBH,I don't blame 'em,but,I loathe screen protectors as a whole,less a perfectly installed factory one,as w/the Huawei Mate 9,you'd be hard-pressed to notice.
I wish a factory-installed protector was an option,perhaps I'd be more inclined to use one,provided it didn't have the looks akin to a protective bra on a car circa 1980-1990.........................
KOLIOSIS said:
I am,in place of a screen protector,I'm using a liquid sealer.
Here's one that's relatively inexpensive:
https://www.walmart.com/ip/NanoBlot-Liquid-Screen-Protector-Phone/165968396
https://www.walmart.com/ip/NanoBlot-Liquid-Screen-Protector-Tablet/112875380
And another that costs a bit more,but,good for several applications:
https://www.nanoflowx.com/spraygard
http://www.ebay.com/itm/Nanoflow-X-...tector-PROTECTS-UP-TO-16-PHONES-/172590962858
Do these sealers work?
That's debatable,but,I've been using several different brands for about two years & while it is impossible to prove a negative I haven't had a single blemish on any of my phones for 2+ years.
Do not mistake this stuff as an equal replacement for a screen protector,it's merely providing scratch resistance,nothing in regards to breakage.
I don't recommend these sealers to everyone,especially to those who are prone to exposing their phones to scratching (using the phone w/dirty fingers/exposed to the elements/dropping/typically careless in regards to pocketing/pursing with items that may scratch on a regular basis,etc...)
I don't baby my phone,but,I do take care to keep it in a pocket holster while @ work & in a neoprene sleeve most other times.
For me,a screen protector is not necessary,so,I use a sealer for added protection against scratching.
Some think they're snake oil & TBH,I don't blame 'em,but,I loathe screen protectors as a whole,less a perfectly installed factory one,as w/the Huawei Mate 9,you'd be hard-pressed to notice.
I wish a factory-installed protector was an option,perhaps I'd be more inclined to use one,provided it didn't have the looks akin to a protective bra on a car circa 1980-1990.........................
Click to expand...
Click to collapse
With my first Note 7 I used Sharkproof "snake oil" and like you was very careful with daily handling. For the 4 weeks (!) i had my first Note 7 I had no issues. The only issue I had was that Sharkproof made the screen too slippery. For my third Note 7, the second was a swapped device from Samsung which went on eBay, I used Samsung's OEM screen protector. On the whole this was a great option as the S Pen worked well and was more effective than gel/TPU type and I managed not to waste money searching for the holy grail of the tempered glass solution. For the Note8, Samsung have not made available their own screen protector.
EDIT : And so for the Note8, I'm going to have to waste money on TPU/Gel like protectors until Samsung....
KOLIOSIS said:
I don't baby my phone,but,I do take care to keep it in a pocket holster while @ work & in a neoprene sleeve most other times.
Click to expand...
Click to collapse
You would have social services take my phone in to protective custody, if you saw how I treated it.
Was just looking at my S7E screen, thinking "that's actually
pretty good, for its age". Then remembered I smashed it and had it replaced a month ago.
I have a case on it now...
My problem with screen protectors: Every one I've used has looked and felt worse than the micro scratches it might prevent.
ReformedAppleFan said:
You would have social services take my phone in to protective custody, if you saw how I treated it.
Click to expand...
Click to collapse
LMFAO,you sound like one of my friends from my youth who handled LP's as if they were Frisbee's on a good day & more like a Zildjian on a drum solo..... ?
Does the S8 have the same gorilla glass the Note 8 will have?
I was so hopeful that i could forego the screen protector on this one but from reading this thread i doubt it.
Last note I had was the 4 and i had the screen crack on me.
no matter how many people say they got no scratches, never go without protector. they are either blind, lie or can't place the phone in right angle to see those scratches.
i always buy protectors because of the scratches and not because the screen could crack.
on my s4 which has gorilla glass 3. i haven't had a protector for the last year after using always the same protector 3 years before.
since then there aren't any hard scratch on the display or anything but i notice alot of fine micro scratches but only when i put heavy light on it and hold it in the right angle.
i have used it much, but mostly at home and also kept care of it. still it happened.
as far as i know and have read this isn't any better on the newest gorilla glas 5. so i will not risk anything and keep on using protectors.
for the note i just simply can't find anything good.
whitestone dome on the s8 was good, but overpriced, not friendly for every case, popped up after a few months or just cracked very fast.
not good enough for this kind of money otherwise it would be good is guess.
all other glass protectors are useless since they only stick to the sides and will force problems like bad touch, dirt underneath or popping up very fast.
then there are wet tpu protectors which i don't like. they are too thin and flexible. they just don't feel right, leave marks quickly and often got a yellow touch or rainbow effect.
also they will probably not stick long on the edges and are mostly not case friendly even if they say so.
so the only thing which i consider are the good old school tpu/pet protectors which are applied without any water or so.
i hope they will stick good on the edges and if they are case friendly nothing will pop up.
it's a little bit harder to get all the bubbles out but i rather put some time into placing the protector right and remove the bubbles then buying every few weeks a new one or even go without any.
of course they will also feel kinda cheap like plastic (it is plastic afterall) but atleast they are not so thin and flexible like the wet tpu ones.
for now i will try this one and hope it will be good. if not well then im fuc*ed cause i can't find anything else!! (
https://www.youtube.com/watch?v=DlsDqBQUwuU
I will be using Clear View cover, so no screen protector for me.
Raw and Vegan!
That's the only way I roll, yo!
Gynomagick said:
Thinking about going raw....any one else?
Click to expand...
Click to collapse
https://www.amazon.com/gp/product/B074MS9Q8C/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Ordered that one from "cubevit", price is right and the reviews from someone who actually has it seem good.
chrisknife said:
no matter how many people say they got no scratches, never go without protector. they are either blind, lie or can't place the phone in right angle to see those scratches.
i always buy protectors because of the scratches and not because the screen could crack.
on my s4 which has gorilla glass 3. i haven't had a protector for the last year after using always the same protector 3 years before.
since then there aren't any hard scratch on the display or anything but i notice alot of fine micro scratches but only when i put heavy light on it and hold it in the right angle.
i have used it much, but mostly at home and also kept care of it. still it happened.
as far as i know and have read this isn't any better on the newest gorilla glas 5. so i will not risk anything and keep on using protectors.
for the note i just simply can't find anything good.
whitestone dome on the s8 was good, but overpriced, not friendly for every case, popped up after a few months or just cracked very fast.
not good enough for this kind of money otherwise it would be good is guess.
all other glass protectors are useless since they only stick to the sides and will force problems like bad touch, dirt underneath or popping up very fast.
then there are wet tpu protectors which i don't like. they are too thin and flexible. they just don't feel right, leave marks quickly and often got a yellow touch or rainbow effect.
also they will probably not stick long on the edges and are mostly not case friendly even if they say so.
so the only thing which i consider are the good old school tpu/pet protectors which are applied without any water or so.
i hope they will stick good on the edges and if they are case friendly nothing will pop up.
it's a little bit harder to get all the bubbles out but i rather put some time into placing the protector right and remove the bubbles then buying every few weeks a new one or even go without any.
of course they will also feel kinda cheap like plastic (it is plastic afterall) but atleast they are not so thin and flexible like the wet tpu ones.
for now i will try this one and hope it will be good. if not well then im fuc*ed cause i can't find anything else!! (
https://www.youtube.com/watch?v=DlsDqBQUwuU
Click to expand...
Click to collapse
I'm getting this for the note 8 as soon as it's out. I've been on contact with the company and sounds like next week. Seems like a very thick pet, or some hybrid of tempered. https://youtu.be/ksCnb3xlKU4
Sent from my SM-N900V using XDA Free mobile app
MACHEK said:
I'm getting this for the note 8 as soon as it's out. I've been on contact with the company and sounds like next week. Seems like a very thick pet, or some hybrid of tempered. https://youtu.be/ksCnb3xlKU4
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
it actually looks quiet good except for the silver bars. lets see when it's available maybe i get a copy too if it's good!! thanks
Gynomagick said:
https://www.amazon.com/gp/product/B074MS9Q8C/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Ordered that one from "cubevit", price is right and the reviews from someone who actually has it seem good.
Click to expand...
Click to collapse
those are ALL fake reviews. don't do it man... just don't
chrisknife said:
those are ALL fake reviews. don't do it man... just don't
Click to expand...
Click to collapse
Ugh, i need something though!
i have this weird thing where i do protectors for at least the first yr then i just go bare. it doesn't make too much sense logically i suppose but i probably will with the Note 8 again. My S7 has been bare for a while now and has zero scratches FYI
chrisknife said:
it actually looks quiet good except for the silver bars. lets see when it's available maybe i get a copy too if it's good!! thanks
those are ALL fake reviews. don't do it man... just don't
Click to expand...
Click to collapse
Yeah silver isn't good, they are actually only doing black for now on note 8
Sent from my SM-N900V using XDA Free mobile app
On second thought. With the monthly insurance I pay for, why not just go with a bare screen and if it cracks, get a new one?
Gynomagick said:
On second thought. With the monthly insurance I pay for, why not just go with a bare screen and if it cracks, get a new one?
Click to expand...
Click to collapse
Bare always feels great!
However, the cuts and scratches really detract. Insurance will not cover that as normal wear and tear. So, for the first time, I'm wrapping mine up. hehe
Bought 9H screen protector. If it's not as "Sensitive" I can always take it off.
chrisknife said:
it actually looks quiet good except for the silver bars. lets see when it's available maybe i get a copy too if it's good!! thanks
those are ALL fake reviews. don't do it man... just don't
Click to expand...
Click to collapse
I checked the reviewers, they seem to give 5 stars to all the products they review!!!
EDIT - Clarification - the spot check I did, I found all the reviewers I selected gave 5 star reviews to other proucts
JameyS said:
Bare always feels great!
However, the cuts and scratches really detract. Insurance will not cover that as normal wear and tear. So, for the first time, I'm wrapping mine up. hehe
Bought 9H screen protector. If it's not as "Sensitive" I can always take it off.
Click to expand...
Click to collapse
I also ordered a wrap to prevent scratches all over
Sent from my SM-N900V using XDA Free mobile app
---------- Post added at 07:37 PM ---------- Previous post was at 07:34 PM ----------
jah said:
I checked the reviewers, they seem to give 5 stars to all the products they review!!!
Click to expand...
Click to collapse
As far as someone saying the reviews are fake there is also a video review of someone getting one and he says he loves it. You can also read the comments on it. I'm gonna do a review on here as soon as I get mine so I'll let you know how it is
Sent from my SM-N900V using XDA Free mobile app

Best screen protector? . And don't recommend whitestone dome (i will explain why)

So got my shiny new Note 8 week ago. Also with that got the Whitestone Dome screen protector and alcantara case.
Tried to install screen protector:
1st. attempt: The screen lined up incorrectly from the bottom, tried to "lift it up to the position" just created more airbubles and the glue poured out from the sides.
After cleaning my Note 8 with the alcohol swipes, (It was a mess to try to clean the phone AND the glass screen protector)
2. attempt with the second bottle of glue..... There was a dust particle on the glue itself. Great.
Wait for a week to mobilefun to ship me another one. (while doing so i was "dry- practicing" to get it 100% correct this time)
3. attempt was a charm.... until.... when the glue spread there was 2 small air bubbles... Take the second bottle and "tap" the small air bubbles away. (while doing so being extremely nervous about that the screen protector might move or great new bubbles). Managed to get the bigger one out but there was the small one... Didn't get that out.
Light up the UV light and call it a day. Only problem is now there is small air bubble that is pretttty distracting to say the least.
So, now i am with 50€ in my account from the order. (Because i demanded that they refund me this horrible product). I am left to choose new screen protector.
My options that i have read:
- Rearth invisible defender - The problem with this is that there is "snowfall" effect and the screen is too damn sticky (according to reviews)
- IQ Shield - The problem with this is that the S-pen (according to reviews) leaves trails to the TPU protector. Because it's so soft and it will not cure overtime.
-Zagg invisible shield - Unresponsivnes and the fact that it has "raimbow" -effect on the screen.
New one that i just founded out about:
-Powerpeak Base- According to this guy (Install Jimmy is Promo's "Base Screen protector for Samsung GALAXY S8 & Note 8 here) Its pretty good. Might be ad though... Does any of you have experience on this?
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.
I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.
Bullitt3309 said:
I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.
Click to expand...
Click to collapse
I am sort of guy, who can easily mess things like that up... So not going to risk it.
Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk
DAvid_B said:
Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
I did check that thanks! Only problem is that i live in EU (Finland) And Amazon will not ship that item to me.... Looked up in Ebay and they will add 20€+ to the original price...
Bummer tho,.
Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.
Base TGSP is a piece of shot
That Jimmy guy sounds like an infomercial
Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer
xile6 said:
Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer
Click to expand...
Click to collapse
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?
I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...
Limeybastard said:
I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...
Click to expand...
Click to collapse
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.
KBeckett said:
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.
Click to expand...
Click to collapse
Im primarily using and trying non glass type films, similar to the stuff used to protect car paint protection. My background includes being able to apply paint protection film on cars so these are all from the same mold that I have been trying. BTW, heat of a hairdryer will aid in adhering the curved edges once applied- slight tip.
I have not tried IQShield yet, sorry. So far the Spigen one fitted well coverage wise,but their film is very aggressive in the orange peel front,
I might try Skinomi next, but I have heard they cut their films short to save a few bucks.
Lets liase and share our experiences with these type of films, cheers.
Thanks for all of you for the help and responses.
Yes the IQshield and Skinomi are on the top of my list... They are around 20€ including shipping to Finland from Ebay. A bit expensive but lets see....
Im currently using IQshield version 2 (case friendly) for about a week now.
I've done a lot of wet install before so i know what to expect using this type of screen protector. Its been a week now and so far no lifting on the curve part of the screen. it is smooth to touch, sensitivity is normal and very good. Im using a VRSdesign slim case and it works well, all corners fitted very well.
I also used skinomi before and if i remember it right IQshield is more smoother than skinomi in-terms of orange peel feeling. The only problem that is s-pen will leave marks when used with this kind of screen protector. (i tried it at the very bottom and its still have mark after a week)
I can give this IQshield a 7.5/10 score. LOL
YesThisIs said:
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.
Click to expand...
Click to collapse
I used the tip of placing painter's tape over the speaker. I covered the speaker enough to not interfere with the glass. It worked great! I do have three small bubbles after two tries but can't see them unless I try. My wife's has one bubble in about the same spot as mine. The lower left corner about 1/3 up the screen where the curve starts. There a number of ways to avoid the creation of bubbles. I couldn't say them all because I'm not an expert in LOCA glue and it's properties. Experimentation is the only way to find out.
Whitestone Dome Glass said:
Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.
Click to expand...
Click to collapse
I am glad that you have started beeing more on forums and social media. I want to thank you for sending me a new one. Now i am waiting for it. Hope this time works.
To be honest, it will be difficult to actually get most tempered glass protectors to stay on this curved glass.. Its a pain and it sucks because I would actually like to get one. I just ordered the whitestore myself..., but they wont be in stock again until the 30th...
I got the PowerPeak Base and it is utter garbage. I lost atleast 30% touch sensitivity and then it just eventually slid off of my phone from me trying to swipe so hard. The middle actually dried up and there was nothing holding the middle to the phone.
I despise the wet installs. They are too soft and will leave indents as you said.. So really its either try tempered glass protectors until you find the one you want, go with indents and wet installs, or just go no screen protector like me!
I have the wet install spigen ones but I tbh would rather go with no protector than use them.
I ordered and installed this on my Note 8 : https://smile.amazon.com/gp/product/B074G1W2RC/ref=oh_aui_detailpage_o01_s02?ie=UTF8&psc=1
Along with a Spigen Tough Armor case. It seems to work well and no real screen sensitivity issues either.
twistanesh said:
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?
Click to expand...
Click to collapse
I get the case friendly 2pack. And havent had problems with lifting.
Had my note 8 since sept 8 and been caseless and no lifting.
Anyone planning on using a cheap protector with LOCA glue needs to check the strength of the LOCA. Some have reported they were not able to remove the protector after using some LOCA glue.
I had 3 attempts at the Dome Glass myself. The first one I got had a broken bridge. I could not get the glue in the right spot. Whitestone refunded me. I bought the next set from Amazon. Everything was perfect until I peeled the plastic off the back of the protector. There must have been a fleck of dirt near the side. I did not see it as I did not have enough light.
I sent the second one back to Amazon and just had to pay return shipping. With the third one I took a different approach. I used a totally level counter top in the bathroom. I ran the shower with hot water for about 10 minutes so the whole bathroom was steamed up. This kept the dust down. I cleaned the phone screen and when I removed the plastic from the protector, it somehow grabbed another piece of dirt. Due to the extreme lighting, I saw it and removed it before installing. It installed perfectly with no dust/dirt or air bubbles. I did the first cure with the UV light then took it out of the jig and wiped the sides, top and bottom with an alcohol pad. I then did the final cure. Not one ounce of glue seeped out. I did not protect the speaker or anything else. If this is done perfectly, this is the absolute best protector available IMHO. The problem is anything short of a perfect install will drive many of us with OCD crazy.
On Monday we traded in my Mothers iPhone and she went with a Note 8. The Dome Glass arrived today. This time, perfect install the first time. I wish Whitestone would include 2 pieces of glass per package since this is the most expensive Note 8 protector. Their CS is a bit slow but they did take care of me in the end. It's a bit of a ripoff to sell the kit for 49 but then only sell the glass and one tube of glue for 39. The refill pack should be 15-20 at the highest.
After a week, none of my edges are lifting at all. Some may be using cases that are not compatible. My protector does not touch my case at anyplace. I think cases that touch the protector have a good chance of raising the edges. Even if the case looks fine after install, if grabbing it makes the case touch the glass, it will eventually lift and get bubbles.

I'd like to tell you about a plastic screen protector I found for the Note 8.

POST UPDATED WITH NOTE VERSION IN COMMENTS
So I'm going to cut to the chase here and say I've tried so many screen protectors for this damn phone that I'm fed up. They all sucked or had problems. Whitestone was a bear to install, got it perfect, then the sides started bubbling. Done with that. I've just been on the constant hunt for a stupid screen protector. Today was the day I gave up. I tore the skin I had on from Amazon because the edges just would not stick. It was only about a mm but it drove me nuts. I had a ring of fuzz and dust around my phone and the rubbery smudgy prone texture was just too much. I am SO FED UP with this hunt that I'm ready to take scratches, whatever.
So today while getting some crap at walmart I went to the phone section. No Note 8 protectors (it is habit to look now), but they had this one for the S8+. Those screens are similar, why the hell not I've tried everything short of lining my phone with clear packing tape.
I brought it home, applied it, patiently worked out the bubbles. Don't fret, even if you get a lot they work out easy. Have some tape near by to do the tape pull back and blot any dust spots you see. Then go through the process of getting rid of bubble again. I did this so many times because I was just doing it in a rush, thinking it wouldn't work at all, and getting dust in the damn thing. But I just kept patient and did the process over and over. It took a while, if I did it in the bathroom after running the shower it wouldn't have. IMO it worked amazingly well. It's a PET film with some flex, but it's NOT a skin. It's not self healing. It will show scratches over time, probably even more so with the Spen, but take care like you do and it will hold up well. It's not brittle like most older static PET films. It's literally the only protector of it's kind I've been able to find locally and the dozens on Amazon. It's a cheap, replaceable and great looking screen protector made for the S8+ but fits the Note perfectly. Here are my results. I used a soft rubber squeege that comes with the IQ shield, don't use a credit card or something that will scratch it. For many of the bubbles I just used my thumb. Finger prints wipe off very easy with this film. Hope this help someone going through what I have been.
Oh first, it's this one. 9.99. I plan on going back and getting all of them. lol
This one:
https://www.walmart.com/ip/ONN-Plastic-Screen-Protector-for-Samsung-Galaxy-S8/925343896
Even better just found one made for the Note 8. Same brand
Congrats man!
No glass no deal
Yeah well this post isn't for you then. Glass on a curved screen is joke. The only viable option is a rip off and not even that great after some use. This is for people like me who don't drop their phones (never have dropped or shattered a screen since the Iphone 3G). I want basic scratch protection that doesn't look like saran wrap. This is the one.
The Note specific version is even better. Highly recommend.
try the Rinke invisible defender. its 8 bux off amazon. it wraps over the sides so you don't have any lift issues. heres a youtube link. its probably one of the best NON glass protectors you can get.
https://www.youtube.com/watch?v=XMbol8eljIg&t=97s
Thanks but I tried that. It felt bad to me as far as texture. This one feels just like the glass. Unless I got a bad rinke lol
I think I've tried every possible type on Amazon. This is the best for me. Smooth like glass, doesn't hold on to prints, doesn't collect dust and doesn't lift at all . It's basically what I've been searching for about a month now or more.
For 9.99 it's perfect. Use and replace every 6 months or so if needed, though it feels resilient. Install is easy. I can't imagine having to replace the Whitestone every time it looks like crap after a while. Not to mention for the money it's way too fragile. Again just my opinion, I'm only trying to help those like me looking for scratch protection that looks and feels good
Here's the actual note version on my phone
Im looking for something like this since all those glass protector are a joke. At least we xan avoid scratches. This is the worse walmrt brand for assesories together with blackweb im surprise that their screen protector is good.
ferris2375 said:
Here's the actual note version on my phone
Click to expand...
Click to collapse
Where did you find the note 8 version?
I got it at Walmart.
eduardmc said:
Im looking for something like this since all those glass protector are a joke. At least we xan avoid scratches. This is the worse walmrt brand for assesories together with blackweb im surprise that their screen protector is good.
Click to expand...
Click to collapse
Yeah it was a last ditch effort to try the s8+ version. Never would have thought I'd like it this much. Just put another one on to make sure it wasn't dumb luck. I put the other on my wife's. It's beautiful. Lol The key to no lift is near perfect alignment. You need to be patient with the bubbles on this one but they come out fairly easy and the protector is really durable to pulling up and putting back down a couple times for a flatter lay.
I actually found the S8 plus version was a bit easier to align due to the fact that it has cutouts up at the top versus one large section cut out like on the note version.
ferris2375 said:
I got it at Walmart.
Click to expand...
Click to collapse
Did you find it in the store? I can't find it online at Walmart.com. Would you happen to have the SKU # or product number.
I hate to sound so excited about a piece of plastic but seriously this has been a pain in the ass trying to cover this screen. Frustrating
seawolf823 said:
Did you find it in the store? I can't find it online at Walmart.com. Would you happen to have the SKU # or product number.
Click to expand...
Click to collapse
Yeah in store. The s8+ version shows up online but not this one. I'll grab my reciept in a sec
Here's the reciept with sku. I've been to two that both have them. Again for anyone who is going to install this make sure you're in a dust-free area if possible have some scotch tape nearby to pull up and dab any dust if need be and make sure your alignment is spot-on. I was able to lift it adjust plenty of times and you may think you screwed it up but just keep at it. Alignment is the priority, then worry about dust and bubbles. You want it to be equal on both sides. Hope this helps. Oh and use your thumb or a rubber squeegee to press bubbles out from the center towards to sides.
I've been using the S Pen no problem it hasn't scratched it yet as long as you don't dig down with it you should be fine and it doesn't have the resistance like the Skins did it's glass like imo
Holy edits lol
One other tip. Be careful pulling the cover off the protector that covers the adhesive side. It's a little tricky to do without touching the underside but it's not bad. Just worth mentioning to take your time peeling that off before you lay it down. Sorry about all the posts I'm sick in bed and bored.
ferris2375 said:
Here's the actual note version on my phone[/QUOTe
Delete
Click to expand...
Click to collapse
GMAN1722 said:
ferris2375 said:
Here's the actual note version on my phone[/QUOTe
Delete
Click to expand...
Click to collapse
It's only in store, they aren't online yet. A few posts back I posted my reciept so you can get the SKU off that if it helps any.
Click to expand...
Click to collapse

Whitestone Dome S7 Edge

Has anyone bought this yet?
I'd like to start this thread so people can post their experiences with the Whitestone Dome screen protector and its compatibility with other cases.
Feel free to post your responses here!
Edit: Seems like no one in the accessories forum has talked about this protector.. I just ordered it on ebay. When it comes ill do a review with my otterbox commuter
They have talked about it. It just that it is buried in the TGSP thread.
I've seen this TGSP on mobile fun' s website and I was incredibly intrigued. The price put me off though at £39.99 and that was with £5 off!
On a side note, I have seen on the internet where people have been using the same type of glue on normal TGSP's to eliminate the halo effect.
To the OP, how much did you pay if you don't mind me asking please?
crash_194 said:
I've seen this TGSP on mobile fun' s website and I was incredibly intrigued. The price put me off though at £39.99 and that was with £5 off!
On a side note, I have seen on the internet where people have been using the same type of glue on normal TGSP's to eliminate the halo effect.
To the OP, how much did you pay if you don't mind me asking please?
Click to expand...
Click to collapse
Was searching on ebay.. prices were 83 to 139.(???!!!)
Searches on aliexpress.com didnt yield anything.
Finally settled on mobilefun.com for 60sgd (around 45usd)
Also, yes, using the LOCA glue on normal TGSPs may yield the same result.. But the dot matrix effect found on most TGSPs are still visible. You also have to buy the less viscous TGSP. I only found this out after I purchased my whitestone set, sigh...
Still though, the whitestone seems pretty good. Mine just arrived. Havent got a chance to apply it yet though
fmaorui said:
Was searching on ebay.. prices were 83 to 139.(???!!!)
Searches on aliexpress.com didnt yield anything.
Finally settled on mobilefun.com for 60sgd (around 45usd)
Also, yes, using the LOCA glue on normal TGSPs may yield the same result.. But the dot matrix effect found on most TGSPs are still visible. You also have to buy the less viscous TGSP. I only found this out after I purchased my whitestone set, sigh...
Still though, the whitestone seems pretty good. Mine just arrived. Havent got a chance to apply it yet though
Click to expand...
Click to collapse
I've watched a whitestone installation video and you seem to get a pretty comprehensive installation kit which is nice (although somewhat expected for the money, but then again I guess this is what you are paying for). The nice thing is at least you will have some stuff you can use on future screen protector installations.
I've been reading about the LOCA glue and yes it looks like 2400/2500? Is the most appropriate stuff for this application.
My only real concern is glue getting in the speaker and around the home button. Not quite clear at the minute how this is avoided on the whitestone dome installation?
*duplicate post*
Just put some scotch tape on the speaker grills and any other sensitive areas and should be solved I think
Update:
Received the Whitestone Dome S7 egde.
Prepping the installation took a long time. I had to tape any holes on the phone (speaker grills, buttons, etc). However installation was relatively easy and intuitive.
After 1 botched installation(i positioned the glass upside down by mistake), i used isopropyl alcohol to clean all glue off both the phone and glass and tried again with the spare glue bottle.
This time, it was perfect. It is perfectly compatible with my otterbox commuter with no signs of lifting after 2 days.
The fact that the protector can be taken off and reused is pretty damn cool.
No issues with sensitivity whatsoever and no visible rainbow effects, dot matrix patterns whatsoever.
Be sure to tape the buttons and grills when installing, though. My friend did it and his home button became stuck after curing.
fmaorui said:
Be sure to tape the buttons and grills when installing, though. My friend did it and his home button became stuck after curing.
Click to expand...
Click to collapse
What do you mean by taping?
lambstone said:
What do you mean by taping?
Click to expand...
Click to collapse
Use some form of sticky tape, and stick it on to cover the buttons or any orifices the phone might have. To prevent glue from inadvertently seeping in during the installation process.
I don't really know how to better explain it.

LIST of full adhesive glass protectors

been a few weeks since i bought 2 note 8's and they're still in box, because of lack of full adhesive protectors, not going to rock it naked as too many hair line scratches got on s8+ fast and the screen cracked on a drop.
can we please compile a list of full adhesive glass protectors full coverage or not, I looked around and didn't find such a list
Whitestone dome (full coverage), I have even purchased, but after reading around here it cracks easily, I have put it on hold as it is also too expensive.
https://forum.xda-developers.com/galaxy-note-8/accessories
​
joooe said:
https://forum.xda-developers.com/galaxy-note-8/accessories
Click to expand...
Click to collapse
thats accessories forum, it doesn't help in compiling a list, most people have posted inadequate information in there...
maybe I shall just wait till elite glass by zagg
bcool15 said:
been a few weeks since i bought 2 note 8's and they're still in box, because of lack of full adhesive protectors, not going to rock it naked as too many hair line scratches got on s8+ fast and the screen cracked on a drop.
can we please compile a list of full adhesive glass protectors full coverage or not, I looked around and didn't find such a list
Whitestone dome (full coverage), I have even purchased, but after reading around here it cracks easily, I have put it on hold as it is also too expensive.
Click to expand...
Click to collapse
I have a Whitestone Done and it didn't crack at all. I screwed up my first one, but then bought another and this time it's applied perfectly with no bubbles or lifted edges. Fits great with my Otter box Commuter too. Definitely the best I tried, although I'm anxious to see how the new Zagg fares in comparison...
sefrcoko said:
I have a Whitestone Done and it didn't crack at all. I screwed up my first one, but then bought another and this time it's applied perfectly with no bubbles or lifted edges. Fits great with my Otter box Commuter too. Definitely the best I tried, although I'm anxious to see how the new Zagg fares in comparison...
Click to expand...
Click to collapse
somewhere within the whitestone thread in the accessories forum i read that a guy had a kickstand on a desk and it fell face down hit the laptop on that same desk cracking the screen
I ordered the singularity protector will post a video here with a few different cases
if anyone has requests on what all to be listed in the video/pictures please advise...
I want majority of people satisfied, as I wasn't by the posted pics here and videos on youtube, not to mention somewere very detailed and because of them I kept my notes in their boxes since purchased
bcool15 said:
somewhere within the whitestone thread in the accessories forum i read that a guy had a kickstand on a desk and it fell face down hit the laptop on that same desk cracking the screen
Click to expand...
Click to collapse
OK... Some said it cracked while applying it, so I was just offering my own positive experience for balance. Having said that, it's still glass after all so it definitely can crack if hit hard enough...but the others I've tried seem thin anyhow. Ultimately, I much prefer that cracking than my screen

Categories

Resources