Related
Hi,
I've been looking for instructions and stuff for rooting my phone Honor 7 Lite (NEM-L21) but I haven't found anything. The only valuable information I discovered was that Honor 7 Lite is probably a renamed Honor 5C for an european market. Some websites said it was renamed because there were changes in hardware (for example Honor 7 Lite supposedly doesn't have a fingerprint scanner, they say - but it's not true, from my experience I can say my phone does have it). So these websites can't be trusted anyway I guess. These two models look alike but I was thinking there could be differences anyway. I don't want to brick my phone. Has anybody tried to root this phone? Can anybody provide me any information about rooting it?
I'm sorry for my poor English and thank you very much for any answer.
Hi,
I have Honor 7 Lite NEM-L21 rooted by using method for Honor 5C. But before rooting, You must have an unlocked bootloader. Steps are:
1. unlock bootloader, after unlocking bootloader, phone will be wiped, so backup your data first - http://www.modaco.com/forums/topic/...our-honor-5c-official-and-unofficial-methods/
2. install custom twrp recovery for Honor 5c (known also as Huawei Nemo and Honor 7 Lite) - https://twrp.me/devices/huaweihonor5c.html
3. after installing twrp i recommend doing backup of boot, cust, oeminfo and system partitions to SD card
4. and now is possible install SuperSU zip from twrp recovery. Some instructions on the net recommends using the SuperSU-2.65 - https://download.chainfire.eu/921/SuperSU
Big Red Warning: for now, there are no firmware released for NEM-L21 in UPDATE.APP form for reflashing the phone from the Huawei eRecovery in case of if you bricked the phone. So, please do things carefully. I strongly recommends to do point 3 ASAP after installing twrp.
circulus said:
Hi,
I have Honor 7 Lite NEM-L21 rooted by using method for Honor 5C. But before rooting, You must have an unlocked bootloader. Steps are:
1. unlock bootloader, after unlocking bootloader, phone will be wiped, so backup your data first - http://www.modaco.com/forums/topic/...our-honor-5c-official-and-unofficial-methods/
2. install custom twrp recovery for Honor 5c (known also as Huawei Nemo and Honor 7 Lite) - https://twrp.me/devices/huaweihonor5c.html
3. after installing twrp i recommend doing backup of boot, cust, oeminfo and system partitions to SD card
4. and now is possible install SuperSU zip from twrp recovery. Some instructions on the net recommends using the SuperSU-2.65 - https://download.chainfire.eu/921/SuperSU
Big Red Warning: for now, there are no firmware released for NEM-L21 in UPDATE.APP form for reflashing the phone from the Huawei eRecovery in case of if you bricked the phone. So, please do things carefully. I strongly recommends to do point 3 ASAP after installing twrp.
Click to expand...
Click to collapse
+1. This is the only safest way OP.
Sent from my honor 5X using XDA Labs
Instructions for rooting Honor 7 Lite/5C NEM-L21 b100 are relatively easy to find and follow: unlock with Huawei's code, flash TWRP and SuperSu...
But for me, rooting before updating firmware was a big mistake! Wish I didn't unlock&root this phone yet; should have just updated with FF.
After rooting i wanted to FF update b100 -> b351 Nougat7/EMUI5... But it required stock recovery, which I had already flashed to TWRP, damn!
Now, another option would have been to flash custom ROM, but I didn't find great ROMs around, just somewhat commercial LineageOS (lacks e.g. dual-sim support)
Anyway, I tried to flash b100 -> b351 with TWRP, failed and ended up with test-keys firmware. Then tried to download FF, but the only input method in test-keys seemed to be google voice instead of keyboard = no success.
Then couldn't find stock recovery.img anywhere, so extracted it from stock update.app with extractor. Luckily the extractor had linux version too.
Then flashed stock recovery, updated with update.app method from test-keys to b132, then FF update to b351.
Doesn't seem possible to root b351 yet; now waiting for Nougat7/EMUI5-compatible version of TWRP.
Last time i modified some Android phone 5 years ago, so count me as n00b sharing this bad experience. Hopefully somebody could learn something
Hello everyone.
I tried rooting with the method mentioned by circulus. Running into a wall, can't get TWRP to start, only thing I get is the default EMUI recovery. Honor 7 lite, Android 6.0, EMUI 4.1.2 and bootloader is obviously unlocked.
Any ideas?
tehrek said:
Hello everyone.
I tried rooting with the method mentioned by circulus. Running into a wall, can't get TWRP to start, only thing I get is the default EMUI recovery. Honor 7 lite, Android 6.0, EMUI 4.1.2 and bootloader is obviously unlocked.
Any ideas?
Click to expand...
Click to collapse
Why you can't open TWRP, what your phone shows, if you tryin' to enter TWRP?
tehrek said:
Hello everyone.
I tried rooting with the method mentioned by circulus. Running into a wall, can't get TWRP to start, only thing I get is the default EMUI recovery. Honor 7 lite, Android 6.0, EMUI 4.1.2 and bootloader is obviously unlocked.
Any ideas?
Click to expand...
Click to collapse
Try to flash 3.0.2.0 Nemo TWRP, let me know if there are any problems left.
Got a Honor 7 lite, and i used special twrp and superSu from this post to root it :
https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356 ---> for EMUI 5.X / Android Nougat
Work so fine.
Enjoy
Plz use a forum for honor 7 or 7 lite in xda . U will.get more support there than here
gopinaidu77 said:
Plz use a forum for honor 7 or 7 lite in xda . U will.get more support there than here
Click to expand...
Click to collapse
this is honor 7 lite xda forum... 5c=honor 7 lite....
thelous said:
this is honor 7 lite xda forum... 5c=honor 7 lite....
Click to expand...
Click to collapse
Hahahaha , never knew this . Thanks for making me aware of ..
Hi. I got a Honor 7 Lite NEM-L21 with Emui 5.0 and bootloader is unlocked. I have tried to flash TWRP with a pc with the command: fastboot flash recovery <filename>.img. The img file is in the platform-tools folder and cmd.exe says that it succeed. But when I try to reboot to recovery its just stuck in the screen your device is unlocked and cant be trusted your device is booting now and then nothing really happens. Any solution? Firmware: Nougat 7.0 B351
EeliX7 said:
Hi. I got a Honor 7 Lite NEM-L21 with Emui 5.0 and bootloader is unlocked. I have tried to flash TWRP with a pc with the command: fastboot flash recovery <filename>.img. The img file is in the platform-tools folder and cmd.exe says that it succeed. But when I try to reboot to recovery its just stuck in the screen your device is unlocked and cant be trusted your device is booting now and then nothing really happens. Any solution? Firmware: Nougat 7.0 B351
Click to expand...
Click to collapse
Holding power button and letting it reboot takes u to homescreen?
gopinaidu77 said:
Holding power button and letting it reboot takes u to homescreen?
Click to expand...
Click to collapse
No... Its stuck in the warning screen... I can still boot the system by holding power but if I attempt to reboot to recovery, its stuck in that warning. I can't access my PC just yet so it would be nice to be able to reboot to recovery without a PC.
EeliX7 said:
No... Its stuck in the warning screen... I can still boot the system by holding power but if I attempt to reboot to recovery, its stuck in that warning. I can't access my PC just yet so it would be nice to be able to reboot to recovery without a PC.
Click to expand...
Click to collapse
power off your device and make sure you don't have connections to phone ,then hold thevolume up and power after vibrate release power ,it will reboot to recovery
if it stucks flash the recovery again via fastboot
venugopalu007 said:
power off your device and make sure you don't have connections to phone ,then hold thevolume up and power after vibrate release power ,it will reboot to recovery
if it stucks flash the recovery again via fastboot
Click to expand...
Click to collapse
Flashed a P9 Lite version of TWRP, works great!
https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356/page20
venugopalu007 said:
power off your device and make sure you don't have connections to phone ,then hold thevolume up and power after vibrate release power ,it will reboot to recovery
if it stucks flash the recovery again via fastboot
Click to expand...
Click to collapse
Do u know his Android version?
gopinaidu77 said:
Do u know his Android version?
Click to expand...
Click to collapse
emui 5.0 ,he said in his first post
venugopalu007 said:
emui 5.0 ,he said in his first post
Click to expand...
Click to collapse
Ok
Hi fellas.
Been busy but got an update, phone is successfully rooted now. Brainfarted a bit earlier and wasn't booting to TWRP.
Me no brain sometiems.
**UPDATE RESOLVED**
For anyone who searches and has same problems.
I needed an sdcard to get the files onto the phone.
To recap - it was stuck in boot, TWRP would load and stated no OS installed.
1. In rooting guide as per Here download file linked in the guide and unzip.
2. From folder 3 of that zip file there is a folder called data containing stock.img - place this onto sdcard.
3. Then go to this thread and download the files as hosted on mega.nz - over 2 gig.
4. Extract that zip to the sd card so that on the card is a folder called 'dload'
5. To confirm, the dload folder should have update.app and 2 folders called dt and hw
6. Put sdcard into phone.
7 .Boot into TWRP
8. Goto install, select storage, select your sdcard then select stock.img, agree to install, ignore message about no os.
9.Once that has installed my phone just restarted, EMUI came up, read the dload folder automatically and ran.
Then once phone started it found a newer update and installed that.
Phone is now working, unrooted and bootloader is locked again.
All this was found on the XDA site, just across various posts.
Thanks again to all.
********ORIGINAL BELOW********
Hi all.
Please help, I'm a ****!
I unlocked bootloader with Huawi code from thier website.
Then I installed TWRP
Which in turn installed SuperSU
All rooted, jobs a fish. as per - This one and This thread.
Decided I dont need root anymore.
Tried to reset and wipe the phone.
Went into TWRP did a factory reset wipe.
Then went into TWRP again and did advanced wipe, and selected everything.
(yes yes i know, what a tit)
So after that i get the 'this phones is unsecured' message, press up vol 3 seconds, press power button to conti, wait 5 seconds etc.
so I wait, and it sticks on 'Your device is booting'
Restart, can get into stock recovery and hisuit will see the phone and try to restore it but fails and say my device is not supported??
Can get into erecovery and connected to wifi to try and update but does not find anything to download.
can get into twrp.
I have downloaded a stock rom as per -- This ROM
Perhaps this is not the correct ROM, but then how do i find out the correct ROM needed now I can not access phone details?
Forced that onto SD card but TWRP will not run it and says it is corrupt.
I can see it with ADB and device manager so my question really is....HELP??
How can i get just stock rom back onto it and then un-root and re-lock the bootloader?
Cheers in advanced.
fabgav said:
Hi all.
Please help, I'm a ****!
I unlocked bootloader with Huawi code from thier website.
Then I installed TWRP
Which in turn installed SuperSU
All rooted, jobs a fish. as per - This one and This thread.
Decided I dont need root anymore.
Tried to reset and wipe the phone.
Went into TWRP did a factory reset wipe.
Then went into TWRP again and did advanced wipe, and selected everything.
(yes yes i know, what a tit)
So after that i get the 'this phones is unsecured' message, press up vol 3 seconds, press power button to conti, wait 5 seconds etc.
so I wait, and it sticks on 'Your device is booting'
Restart, can get into stock recovery and hisuit will see the phone and try to restore it but fails and say my device is not supported??
Can get into erecovery and connected to wifi to try and update but does not find anything to download.
can get into twrp.
I have downloaded a stock rom as per -- This ROM
Perhaps this is not the correct ROM, but then how do i find out the correct ROM needed now I can not access phone details?
Forced that onto SD card but TWRP will not run it and says it is corrupt.
I can see it with ADB and device manager so my question really is....HELP??
How can i get just stock rom back onto it and then un-root and re-lock the bootloader?
Cheers in advanced.
Click to expand...
Click to collapse
you can find the model (for me it's vns-l31) on the back of the phone, just find the corresponding oeminfo file and the update file. flash the oeminfo file, put the update file from the rom zip in the dload folder and reboot using the 3 button combo till it says something about installing update
here's a list of update files: https://forum.xda-developers.com/hu...huawei-p9-lite-firmware-compilations-t3517124
and here you can find the oeminfo files, there's a google drive link under oemfiles, at least for the vns-l21, 22 and 31: https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
mjz2cool said:
you can find the model (for me it's vns-l31) on the back of the phone, just find the corresponding oeminfo file and the update file. flash the oeminfo file, put the update file from the rom zip in the dload folder and reboot using the 3 button combo till it says something about installing update[/url]
Click to expand...
Click to collapse
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
fabgav said:
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
Click to expand...
Click to collapse
first of all, no, p9 is a different phone, but you posted on the p9 lite forum. i'd suggest posting this question on the p9 forum.
i don't know exactly how it works for the p9, but it shouldn't be much different.
for the rom zip: inside that zip there's an update.app file, that file should indeed be put in a new folder called dload, but it won't be installed through twrp.
on the p9 lite it works like this: you flash the oemfile through twrp, and after that push and hold both volume buttons and the powerbutton till the phone reboots and shows an update progress screen, then you can release the buttons. now the update file will be installed. but then again, i don't know the procedure for the p9 so be sure to post your question on the correct forum.
edit: i've taken a look on that link to the stock rom you tried installing, it's a zip file that contains the dload folder, just put that folder on the root of your sdcard. do make sure it's the correct version.
you will have to flash the stock recovery for your phone however, and if the p9 works the same way as the p9 lite you should find an oeminfo file and flash that with twrp.
So sorry, I didn't realise I was in the lite forum!
I'll ask a mod to move, sorry and thanks for you help.
fabgav said:
So sorry, I didn't realise I was in the lite forum!
I'll ask a mod to move, sorry and thanks for you help.
Click to expand...
Click to collapse
here's a link to the oeminfo for eva -l9: https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903 i think that one should be flashed in twrp, and after that you can use the 3 button combo
no problem at all
fabgav said:
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
Click to expand...
Click to collapse
Hello
Here it is p9 lite.
Section p9 is here. https://forum.xda-developers.com/p9
I think you are looking for this.
https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
Yes the steps are.
Bootloader
Twrp
Flash Cxxxoeminfo
DLOAD Bxxx
SOLVED
First post updated with fix.
Thanks for all the help here on XDA
deleted by user
Any other place i can download the "dload" file beisides mega...please any help...
Yureka 2 :NO OS installed .Do you want to reboot ? Clicked reboot.Mobile hangs
Hi,
I tried to install Lineage OS 15.1 custom ROM using TWRP recovery in my Yureka 2 YU5551. I wiped out the data before flashing. During flashing I faced Error 7 and unable to install custom ROM.Twrp asked this- NO OS installed. Do you want to reboot? I Clicked reboot and my mobile not even booted properly. Still hangs. I tried to open recovery mode using the power button and volume up and volume down button. I am unable to go to recovery mode. When I connect my mobile to my laptop its not recognizing as the phone is not restarting.
Can someone plz help me how to install an OS and start my phone. Thanks in advance.
Thanks
Thinagharraj
Hello sir, please notice me. Can I possibly get another link to get the stock.img because the link that you gave was already not available. Hoping for your response. Thanks
I have sticker in recovery no OS installed + no backup + locked bootloader
What can I do
----------------------/----------------------
Any one please help me
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
7. Use dload methode for update (hold 3 buttons phone and dont release before "dload screen" appears)
8. Unlock your bootloader again (important!) And make a factory reset
9. Your phone reboot (please wait ) and done!
Ok now you are on official version, please update on setting menu >> update and choice, rest on official or flash a custom rom..
P9 lite brick precision:
In my personal experience the "p9 lite" is very easy to flash, mod or other tips and the risk of HARD brick is very very tiny.
If you see this page and your phone bootloop, relax, keep calm at 99,999% you have a little and ridiculous brick
Good luck and flash happy!
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
macao1989 said:
hi! i'm on 381, on my phone i have root, twrp and elite kernel...this guide is good for me???why after dload method i have to re-unlock my bootloader??
thank you and sorry for my english XD
Click to expand...
Click to collapse
Yes, is good for you.
Not necessary to re-unlock bootloader.
Therand said:
Hi!
I see the large number of requests concerning the roolback of a custom rom to a official and untouched EMUI 4, i decide to create this thread.
After follow that methode, you able to rest on official EMUI and get the new update automatically on OTA (directly on your phone) OR try to install custom rom with a clear and good base version.
1. You ave access on TWRP?
-If not, pleas unlock your bootloader (again) and flash TWRP recovery for you actual version (marshmallow or nougat).
-perform a full wipe and restore your partitions on "ext4" format, shutdown phone.
2. Get a "oem_info.zip" for your model phone (dont extract the .zip) and push it on your internal or external sd.
-This archive contain cust and oem info for patched your phone at the correct manufacture information.
-I have a link for VNS-L31 (c432, but is not very important) HERE LINK
-If you have other model (VNS-L31) pleas find a correct patch for you (VNS-L21, ...).
3. Find and download a EMUI marshmallow official full-ota update.
-for a VNS-L31 i advice choice a VNS-L31C432B160 full-ota update.
4. Unpack your update archive.
5. Create "dload" folder on your internal or external sd and put it UPDATE.APP
6. Reboot phone on TWRP recovery and flash "oem_info.zip"
Click to expand...
Click to collapse
I can do everything up to point 6... won't enter to twrp... stays on Your device is now booting...
Update: I can now reach point 7 but now won't do dload (3 buttons) method... Huawei logo all the time. Can't even turn off the phone
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Therand said:
In my other thread you post the same problem but is not entirely the same..
You succeeded to enter on fastboot mode? Flash recovery?
If you follow the steps 1-5 is impossible to fail the 6 point..
You have acces on fastboot mode or not?..
Click to expand...
Click to collapse
I did update the post... 3 hours ago I wasn't able to enter TWRP, some way I did managed, now I can enter fastboot, I did flash custOEM (sorry I don't remember exactly the name but it's the one of your post) .zip file. Now I can't do dload method, stuck on huawei logo. If I try to go to recovery, I got red message "phone fail validation"...
I know, I post on both but I was trying to do everything...
just tried... validation red error message won't let me go to TWRP now...
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Therand said:
You have a VNS-L31C432?
Your phone does not enter at dload mode?
Wipe all partitions an retry flash a oeminfo for your model phone (if not C432 you need right oeminfo).
Click to expand...
Click to collapse
How can I wipe all partitions if stuck in Huawei logo? Is there a way to do everything from adb command line? (I'm using Mac and cannot use all the tools I've found here XDA neither hiSuite which is basically a backup photo/video only the Mac version).
Thank for helping, really appreciate
To answer your question in the other thread, yes bootloader is unlocked and I am on C432.
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Therand said:
What's your rom have before the bootloop?
You have the right version of TWRP for your rom?
If you have a MM version Don't flash a TWRP for N.
Send me a link to TWRP version used (thread forum)
Click to expand...
Click to collapse
Before the bootloop I was on L31C900 (on the phone) but I did actually flashed C432B160 because I did rollback. TWRP used I've found in the other post where there's a OEMfile to flash (but for this I need to double check because I did look so many pages which I am not 100% sure.
I not have experience on other model that C435.
But i suggest to find a oeminfo for your variant (C900?)
For TWRP you need flash a version for MarshMallow HERE
Flash it and pas return here (fastboot flash return and first enter to new recovery)
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
islandman75 said:
Hi, found Windows emulator for MacOs so I extract from update.app boot.img and flash.
I did format all partitions as told using a proper twrp this time.
What's next step, system says NO OS INSTALLED?
Click to expand...
Click to collapse
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Therand said:
Flash partitions on .img files is not needed.
Just find a corect oeminfo for your model phone.
Flash it on TWRP recovery.
Use dload methode to update on basical version (MarshMallow b160).
After that, unlock bootloader again and make a factory reset.
Switch on your phone (the first boot make long time).
Update on last emui on OTA.
Done!
After that you able to install a custom rom.
Click to expand...
Click to collapse
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
islandman75 said:
Done!
Thanks again you're saving my life!
IT won't turn off so been always on it won't keep the charge... Writing so because apparently it won't go to download mode (dload) if plugged in. On the other way if I unplugged from power it won't even start. Shall I force to download mode using console ADB or FASTBOOT? I had looked but can't find anything...
Click to expand...
Click to collapse
I not understand.
You not able to switch on your phone without connected charger?
Therand said:
I not understand.
You not able to switch on your phone without connected charger?
Click to expand...
Click to collapse
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
islandman75 said:
Correct. Because I'm not able to switch it off it won't keep the charge. When discharged, the minute I do plug on charge it wakes up... That's the loop...
My main question is: does a command exist to enter download mode using terminal?
Click to expand...
Click to collapse
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Therand said:
You have a hardware bug?
No abd command to enter dload mode..
Try flash a update.zip with twrp (not guaranted)
After that unlock bootloader again and make factory reset.
Click to expand...
Click to collapse
I'll try. Thank you
Hi, I followed this guide to go back to stock from elite rom. I flashed my oeminfo.img on twrp and then went to dload combination. Do I have to unlock the bootloader after the reboot? Thanks!
Hi,
I followed your guide and it works perfectly thanks!
Hi, I have problem.
i unlocked and rooted my honor 5C NEM L-21, but then i changed my mind and wanted to unroot it, when i done it the device bricked. after some investigation a unbricked it via adb, but now i cant go to recovery where i have backed up my old rom. I cant even go to developers options. So now im stuck with partly functional ROM and i cant even done Factory reset. I tried to download and install ROM via Firmware Finder, but always when i try to install the rom, it writes that it is not verified.
Can anyone please help me? Im really worried. Thanks
twrp backup
I found my backup on SD card, but i dont know how to flash it since i cant boot into recovery or enable usb debugging
NameNotFound74 said:
Hi, I have problem.
i unlocked and rooted my honor 5C NEM L-21, but then i changed my mind and wanted to unroot it, when i done it the device bricked. after some investigation a unbricked it via adb, but now i cant go to recovery where i have backed up my old rom. I cant even go to developers options. So now im stuck with partly functional ROM and i cant even done Factory reset. I tried to download and install ROM via Firmware Finder, but always when i try to install the rom, it writes that it is not verified.
Can anyone please help me? Im really worried. Thanks
Click to expand...
Click to collapse
Download stock firmware and flash it via dload method.
i dont know exactly how to do it. Do i just create dload folder on sd card, put the rom in it, then turn off the device, pres volume + and - and power button? or do i have to do even something else?
And where can i download Stock ROM? I downloaded some but i dont know if it is legit, official ROM
NameNotFound74 said:
i dont know exactly how to do it. Do i just create dload folder on sd card, put the rom in it, then turn off the device, pres volume + and - and power button? or do i have to do even something else?
And where can i download Stock ROM? I downloaded some but i dont know if it is legit, official ROM
Click to expand...
Click to collapse
Yes create a dload folder and put update.app in it and press three button...
You can download stock ROM fro Huawei site according to you model number
hassanjavaid8181 said:
Yes create a dload folder and put update.app in it and press three button...
You can download stock ROM fro Huawei site according to you model number
Click to expand...
Click to collapse
Thanks, i will try it!
NameNotFound74 said:
Thanks, i will try it!
Click to expand...
Click to collapse
hassanjavaid8181 said:
Yes create a dload folder and put update.app in it and press three button...
You can download stock ROM fro Huawei site according to you model number
Click to expand...
Click to collapse
So i tried it, but it says: Software install failed! Incompatibility with current version. Please download the correct update package.
NameNotFound74 said:
So i tried it, but it says: Software install failed! Incompatibility with current version. Please download the correct update package.
Click to expand...
Click to collapse
Only firmware which will flash via dload..should be same number or higher number...
For example if you were on b340 you can only flash b340 or higher number like b341 or 350
You cannot flash 330 without rollback pkg
hassanjavaid8181 said:
Only firmware which will flash via dload..should be same number or higher number...
For example if you were on b340 you can only flash b340 or higher number like b341 or 350
You cannot flash 330 without rollback pkg
Click to expand...
Click to collapse
can i flash rollback when i have unlocked bootloader? Information on honor websites says that i cant have rooted or unlocked phone...
NameNotFound74 said:
can i flash rollback when i have unlocked bootloader? Information on honor websites says that i cant have rooted or unlocked phone...
Click to expand...
Click to collapse
now i flashed rollback and it says that im on b300-log, but i still cant flash b350
NameNotFound74 said:
now i flashed rollback and it says that im on b300-log, but i still cant flash b350
Click to expand...
Click to collapse
Did you download correct pkg according to your build number
hassanjavaid8181 said:
Did you download correct pkg according to your build number
Click to expand...
Click to collapse
after that i downloaded another one, with emui 4, works great, now i will just upgrade to emui 5 via OTA. Thank you for your help!
NameNotFound74 said:
after that i downloaded another one, with emui 4, works great, now i will just upgrade to emui 5 via OTA. Thank you for your help!
Click to expand...
Click to collapse
Glad that you fixed it..now enjoy
hassanjavaid8181 said:
Glad that you fixed it..now enjoy
Click to expand...
Click to collapse
Hi, i have another, similar problem... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. Please can you help me somehow?
NameNotFound74 said:
Hi, i have another, similar problem... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. Please can you help me somehow?
Click to expand...
Click to collapse
Did backup restored successfully??
hassanjavaid8181 said:
Did backup restored successfully??
Click to expand...
Click to collapse
No it didn't worked for me. It happened to me twice and either time it didn't work. It was always stuck on honor logo and couldn't be turned on.
NameNotFound74 said:
No it didn't worked for me. It happened to me twice and either time it didn't work. It was always stuck on honor logo and couldn't be turned on.
Click to expand...
Click to collapse
Did you try to change twrp version??
NameNotFound74 said:
Hi, i have another, similar problem... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. Please can you help me somehow?
Click to expand...
Click to collapse
Whats your build number and model?
Are you able to flash twrp or able to boot to it?
Flash Rollback package
NameNotFound74 said:
So i tried it, but it says: Software install failed! Incompatibility with current version. Please download the correct update package.
Click to expand...
Click to collapse
Then stock firmware flash using dload
Hi All,
I was trying to install the CN ROM in my Nubia redmagic 3 but now it's bricked.
I forgot to enable the developer option in my phone before I tried to install the CN Rom.
Now my device is showing me Your device is corrupt.It can't be trusted and will not boot.
I tried to connecty phone to pc and in device manager it shows usb unrecognised.
Can someone please help me to fix my phone.
Thanks in advance.
Abhinil2009 said:
Hi All,
I was trying to install the CN ROM in my Nubia redmagic 3 but now it's bricked.
I forgot to enable the developer option in my phone before I tried to install the CN Rom.
Now my device is showing me Your device is corrupt.It can't be trusted and will not boot.
I tried to connecty phone to pc and in device manager it shows usb unrecognised.
Can someone please help me to fix my phone.
Thanks in advance.
Click to expand...
Click to collapse
Use the recovery tool, it even has instructions.
Finally the issue is resolved
Was able to fix my phone thanks to the recovery tool provides by @JerryYin
Abhinil2009 said:
Was able to fix my phone thanks to the recovery tool provides by @JerryYin
Click to expand...
Click to collapse
I have the same problem. Which tool is this ??
My phone starts up where it has the RESET options. RESTART IN RECOVERY MODE AND ETC ... I downloaded the official ROM, but found it only in ZIP format. How to install in this format? Help me please
yurifonseca said:
I have the same problem. Which tool is this ??
My phone starts up where it has the RESET options. RESTART IN RECOVERY MODE AND ETC ... I downloaded the official ROM, but found it only in ZIP format. How to install in this format? Help me please
Click to expand...
Click to collapse
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044
RZaR2001 said:
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044
Click to expand...
Click to collapse
I was able to solve it thanks to your help and the user JerryYin; THANK YOU VERY MUCH !! GOD BLESS YOU!!!!!!!!!!!!!!!!!!!!!!:crying::crying::crying::crying::crying:
Issue regarding device corrupted after cn rom installation.
whenever you want to go for the China rom from global rom version 2.15 do not install the latest China rom install China rom version 2.18 first then upgrade to the latest if you will try to install the latest you will just soft brick your device. And if you soft brick your device don't panic just boot into fastboot mode and flash the stock recovery of redemagic 3 into your phone now place either global rom or China rom v 2.18 Into the pendrive and connect to the device otg boot into the stock recovery there you will see a option install update via otg select the option and locate the package and install let the device boot first boot will take 2 to 3 minutes and now your device has been recovered without any tool. PLEASE BEWARE DO NOT INSTALL CHINA ROM WITHOUT UNLOCKING YOUR BOOTLOADER CAUSE IF YOU MESS ANYTHING IN INSTALLATION OF CHINA ROM IN A LOCKED BOOTLOADER THERE IS A CHANCE THAT YOU MAY HARD BRICK YOUR DEVICE.
Amandogra1997 said:
whenever you want to go for the China rom from global rom version 2.15 do not install the latest China rom install China rom version 2.18 first then upgrade to the latest if you will try to install the latest you will just soft brick your device. And if you soft brick your device don't panic just boot into fastboot mode and flash the stock recovery of redemagic 3 into your phone now place either global rom or China rom v 2.18 Into the pendrive and connect to the device otg boot into the stock recovery there you will see a option install update via otg select the option and locate the package and install let the device boot first boot will take 2 to 3 minutes and now your device has been recovered without any tool. PLEASE BEWARE DO NOT INSTALL CHINA ROM WITHOUT UNLOCKING YOUR BOOTLOADER CAUSE IF YOU MESS ANYTHING IN INSTALLATION OF CHINA ROM IN A LOCKED BOOTLOADER THERE IS A CHANCE THAT YOU MAY HARD BRICK YOUR DEVICE.
Click to expand...
Click to collapse
Ohh, i made this mistake, I installed last cn rom to my red magic 3 than i got stuck in fastboot mode!
Please help me to solve this ;(
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044
Use this
I used this tool and got error in last step.
yurifonseca said:
I was able to solve it thanks to your help and the user JerryYin; THANK YOU VERY MUCH !! GOD BLESS YOU!!!!!!!!!!!!!!!!!!!!!!:crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I'm unable to download the tool
The unbrick tool only works if your bootloader is unlocked other wise it wont do a thing if you've relocked your bootloader. wheres the fix for a locked bootloader ?????????????
vibraniumdroid said:
Use the recovery tool, it even has instructions.
Click to expand...
Click to collapse
Hey bro should I install Nubia Rm3s rom in my Rm3 ?
xxanthonyheaverxx said:
The unbrick tool only works if your bootloader is unlocked other wise it wont do a thing if you've relocked your bootloader. wheres the fix for a locked bootloader ?????????????
Click to expand...
Click to collapse
Unbrick tool only work if you boot to edload mode. Ok