{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
I am really happy to share my AOSP Oreo builds with all of you. This rom is pure AOSP, with some fix I made, but all credits goes to all of the contributor of Sony Xperia Open Device.
How To Install
Download ROM & Kernel
Reboot your phone to fastboot mode
Flash ROM & Kernel with this command
Code:
fastboot flash system system.img
fastboot flash boot boot.img
Reboot to recovery
Install OpenGapps (I use this)
Reboot and enjoy your oreo
FeatureWorking
Wifi
Bluetooth
Camera
Fingerprint
GPS
Sensors
Dual Sim
Bugs
Charging sometimes slow, sometimes fast (usb driver)
When device enter deepsleep fingerprint sometimes won't work
You tell me...
Changelogv1.0
Improved fingerprint
Camera offset fixed
Louder speaker
Why you should try Oreo?
A LOT FASTER than stock!!!
Speaker is really good compared to stock
Camera autofocus is faster than stock
Low light photo result is better than stock
XDA:DevDB Information
AOSP OREO 8.0.0 Xperia XZ Dual F8332, ROM for the Sony Xperia XZ
Contributors
Rudy
Source Code: https://github.com/sonyxperiadev/
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2017-09-29
Created 2017-09-29
Last Updated 2020-04-07
Can I use it with F8331 ?
hello thank you for your amazing work
Videos don't work for me at all though. Apps like youtube - whatsapp - vlc crash
any progress on the video playback bug?
etiennebanks said:
Can I use it with F8331 ?
Click to expand...
Click to collapse
I think you can, but you just have dualsim icon. Maybe I will try to build for F8331, but I can't test it.
mkh93 said:
hello thank you for your amazing work
Videos don't work for me at all though. Apps like youtube - whatsapp - vlc crash
any progress on the video playback bug?
Click to expand...
Click to collapse
Okay it's weird, because I test it first with clean install before uploading and it's fine, I'll see what I can do.
Okay, I have found a problem with video stuttering and I have a work around for video stuttering issue. Here is the explanation:
1. The problem is when playing video the power hal is not locking the rqbalance state for omxdecode, and when something trigger the rqbalance to lower performance mode (balance mode) the video start to stutter. The work around is to see if the current power mode is omxdecode or encode it will lock at that until it finished.
2. The problem for video recording is pretty much the same, the camera cannot acquire the performance lock so the video recording is stuttering.
I have attached the fix, just flash it in twrp. This is a temporary work around, because I think my code implementation is not that good, but I think Sony developers will have a better implementation.
For developer correct me if I'm wrong or you found someting else about this issue. Thank you.
edit: sorry, mess something up, for you who have downloaded it, please download again
Was wifi tethering & portable hotspot function tested? I've tried thay Sony AOSP Oreo build but the function crashes on that ROM.
tanto124 said:
Was wifi tethering & portable hotspot function tested? I've tried thay Sony AOSP Oreo build but the function crashes on that ROM.
Click to expand...
Click to collapse
I forgot about this, it works, you just need to rename your hotspot first.
Rudy said:
I forgot about this, it works, you just need to rename your hotspot first.
Click to expand...
Click to collapse
Thanks a lot, I'll try it!
How about USB OTG?
& HDR+ pixel camera?
Is there any way to enable slow motion and 4k recording modes or stock sony camera?
aiwonsi said:
How about USB OTG?
& HDR+ pixel camera?
Click to expand...
Click to collapse
I don't have usb otg, so can't check it. For HDR+ I am working on it, but still stuck.
rheckr said:
Is there any way to enable slow motion and 4k recording modes or stock sony camera?
Click to expand...
Click to collapse
Yes for slow motion and 4k, for stock sony camera no.
Rudy said:
Yes for slow motion and 4k, for stock sony camera no.
Click to expand...
Click to collapse
Thanks for reply. How can i enable slow motion and 4k? This rom doesn't work for F8331 unfortunately - doesn't see any sim card.
Have you got "waiting for download" problem in Google Play Store?
thanks for the rom, i have encountered some problems, like sometimes sim 1 or sim 2 will go offline , hotspot issue even after rename it it will restart the phone then works, camera pics size are very low, fingerprint sensor not working after the first install and cant remove it, battery life is not great ..
regards.
Rudy said:
Okay, I have found a problem with video stuttering and I have a work around for video stuttering issue. Here is the explanation:
1. The problem is when playing video the power hal is not locking the rqbalance state for omxdecode, and when something trigger the rqbalance to lower performance mode (balance mode) the video start to stutter. The work around is to see if the current power mode is omxdecode or encode it will lock at that until it finished.
2. The problem for video recording is pretty much the same, the camera cannot acquire the performance lock so the video recording is stuttering.
I have attached the fix, just flash it in twrp. This is a temporary work around, because I think my code implementation is not that good, but I think Sony developers will have a better implementation.
For developer correct me if I'm wrong or you found someting else about this issue. Thank you.
edit: sorry, mess something up, for you who have downloaded it, please download again
Click to expand...
Click to collapse
Your fix is working great, I'm really happy to see that you're working hard to solve various issues.
If you could also tweak screen auto brightness a bit [emoji6]
Envoyé de mon Xperia XZ (AOSP) en utilisant Tapatalk
@Rudy can you please explain how you got the camera offset fixed? That would be quite invaluable for custom rom development.
Also, is this build pure sonyxperiadev or did you modify some things. I don't see a link to your github in the op, hence the question
rheckr said:
Thanks for reply. How can i enable slow motion and 4k? This rom doesn't work for F8331 unfortunately - doesn't see any sim card.
Have you got "waiting for download" problem in Google Play Store?
Click to expand...
Click to collapse
You need to edit the media profiles, it's located in /system/vendor/etc, I think I have seen pull request with this change.
Nope, never got that problem.
xenonlife said:
thanks for the rom, i have encountered some problems, like sometimes sim 1 or sim 2 will go offline , hotspot issue even after rename it it will restart the phone then works, camera pics size are very low, fingerprint sensor not working after the first install and cant remove it, battery life is not great ..
regards.
Click to expand...
Click to collapse
Yap, hotspot is a little bit unstable. Do you clean install this rom?
niaboc79 said:
Your fix is working great, I'm really happy to see that you're working hard to solve various issues.
If you could also tweak screen auto brightness a bit [emoji6]
Envoyé de mon Xperia XZ (AOSP) en utilisant Tapatalk
Click to expand...
Click to collapse
Thanks for the feedback :good:
Is there a problem with auto brightness?
oshmoun said:
@Rudy can you please explain how you got the camera offset fixed? That would be quite invaluable for custom rom development.
Also, is this build pure sonyxperiadev or did you modify some things. I don't see a link to your github in the op, hence the question
Click to expand...
Click to collapse
This issue happen because of the active array size and sensor size is not initialized in cropregionmapper because active array pixel size < sensor size. My fix is just to comment the return at cropregionmapper update when active array pixel size < sensor size condition happen , so that it will still initialize. It's a bad implementation but it works until the better work around is found.
Code:
void QCamera3CropRegionMapper::update(uint32_t active_array_w,
uint32_t active_array_h, uint32_t sensor_w,
uint32_t sensor_h)
{
// Sanity check
if (active_array_w == 0 || active_array_h == 0 ||
sensor_w == 0 || sensor_h == 0) {
LOGE("active_array size and sensor output size must be non zero");
return;
}
if (active_array_w < sensor_w || active_array_h < sensor_h) {
LOGE("invalid input: active_array [%d, %d], sensor size [%d, %d]",
active_array_w, active_array_h, sensor_w, sensor_h);
//return;
}
mSensorW = sensor_w;
mSensorH = sensor_h;
mActiveArrayW = active_array_w;
mActiveArrayH = active_array_h;
LOGH("active_array: %d x %d, sensor size %d x %d",
mActiveArrayW, mActiveArrayH, mSensorW, mSensorH);
}
Rudy said:
Okay, I have found a problem with video stuttering and I have a work around for video stuttering issue. Here is the explanation:
1. The problem is when playing video the power hal is not locking the rqbalance state for omxdecode, and when something trigger the rqbalance to lower performance mode (balance mode) the video start to stutter. The work around is to see if the current power mode is omxdecode or encode it will lock at that until it finished.
2. The problem for video recording is pretty much the same, the camera cannot acquire the performance lock so the video recording is stuttering.
I have attached the fix, just flash it in twrp. This is a temporary work around, because I think my code implementation is not that good, but I think Sony developers will have a better implementation.
For developer correct me if I'm wrong or you found someting else about this issue. Thank you.
edit: sorry, mess something up, for you who have downloaded it, please download again
Click to expand...
Click to collapse
Hey! I'm the one who developed the RQBalance-PowerHAL.
Yes you are absolutely right, the logic for what you explained is missing.... actually, the PowerHAL is not finished yet:
1. Some optimizations are still missing
2. Support for timed optimizations has been pushed, but this has to be used with the .. missing optimizations, mainly for camera.
If you have any ready code to address the issue, I will be happy to review it and eventually help you to make it better.
We're always open for contributions!
Hi, are you planning on making F8331 builds? would like to use your Oreo version with the camera offset fix.
Thanks
Is this ok to flash through twrp?
ratoune said:
Hi, are you planning on making F8331 builds? would like to use your Oreo version with the camera offset fix.
Thanks
Click to expand...
Click to collapse
Right now my problem is my laptop storage space, it's almost full, you can use fastbooking or clshortfuse build, just flash the stutter fix, it includes the camera hal too.
fatguy666 said:
Is this ok to flash through twrp?
Click to expand...
Click to collapse
No, it's not a flashable zip.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[COLOR="red"]Your warranty is now void.[/COLOR]
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
/* What’s working */
Audio
Bootanimation
Brightness Level
Bluetooth
Camera *needs to be improved
Fingerprint reader
Microphone
MTP
NFC
Wi-Fi
LED
RIL (calls, sms, microphone, data)
Torch
All sensors except fingerprint reader
SD Card
Capacitive buttons
Torch
Wi-Fi Hotspot
/* What’s not working */
You tell me
Install Instructions1. Download ROM from the link below.
2. Wipe dalvik/cache/data/factory reset.
3. Flash the rom in recovery.
4. Reboot device.
5. Now you can help me to find bugs
Downloads
Latest Build
OFFICIALUNOFFICIAL
ExyGen² staff:
Fevax, fedegin, jah2110, briann_cs
If you are happy with my work, please:
Thank You! :victory:
XDA:DevDB Information
OFFICIAL LineageOS 14.1 for Galaxy S7 Edge, ROM for the Samsung Galaxy S7 Edge
Contributors
Fevax, jesec
Source Code: https://github.com/Fevax
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N Bootloader and Modem
Based On: LineageOS
Version Information
Status: Nightly
Created 2017-01-04
Last Updated 2017-06-10
Changelog:
20170115 -> 20170205
- Fingerprint deletion bug is now fixed by preventing users to enroll more fingerprints than what HW allow.
- Some network-related problems are now fixed.
- Battery life should be improved now.
- HW encoders and decoders are enabled again.
- Size of package is reduced. (from approx. 570M to 460M)
- Wi-FI hotspot is fixed.
01/15
hero-common: disable Exynos HW encoders
* This change fixed video recording(in camera app and other apps like Snapchat).
audio: redo mixer_paths
* This change fixed headset mic and other audio-related problems.
01/14
Off-mode charging is fixed.
01/13
Fingerprint reader is now fixed.
01/11
kernel: bcmdhd4359: update to 1.363.59.181
* This change updates Wi-Fi driver to a much newer version. Should improve Wi-Fi stability and signal strength.
01/09
hero-common: add back Snap camera
- Image quality of built-in camera should be better now.
PD: Some users are reporting battery drain on this build.
01/08
universal8890: Use custom rssi buckets, ignoring rssnr
- This change should make LTE signal looks stronger.
hero: add power profile
- This change fixed battery stats.
vendor: wifi: set country code to ALL
- This change should fix Wi-Fi problems in some countries.
vendor: wifi: add some hacks to make Wi-Fi signal strength stronger
- I am not sure if it works lol.
01/07
- Vibrator is now fixed.
- Rendering issues is now solved (but not on stock android browser, you are recommended to use Chrome or other browsers).
- Enabled multiwindow support.
- Some performance improvements.
- Add gains to input/output volume(should fixed low volume problem in some situations). Also maybe mic problem of Viber and some IM apps is fixed.
01/05
- Snap Camera was removed and has been replaced by Google Camera, now the camera should work a lot better than previous build.
- GPS now has been completly fixed, it was working but with some errors that cause performance issues.
- Microphone was not working on some applications, now should work fine. Still have some problems while using headphones, we're working on that.
- General performance has been improved.
- DualSIM support, now should work on FD variant, please report.
- Now the random freeze problem should be gone.
- Video playback will work after a second reboot due to SELinux, please report.
01/02
- Camera has been fixed, it won't work anymore when you closed it due to some HAL problems, we're working on that. It will work again after a few minutes.
- Now flashlight it's working, but it will work when camera works.
- GPS has been fixed.
- Low volume audio via headphone jack has been fixed.
12/30
- Initial Release.
According THIS changes, now the builds comes without root, so, if you want root needs to use external tool like SuperSU.
Reserved 3
Reserved 4
Great to see a Lineage Nougat ROM, will be trying this out! :good:
Good job, can't wait to get support for flat!
Yes ! Awesome i will try when it will be possible to use daily ?
Fevax, do you think that is better this ROM or Resurrection Remix of Jesse I know that both are working together. I like more RR but I think maybe this will be more "stable" I know that isn't stable but I need to know what of both do you think is the one with the least bugs? Thank you so much for this fantastic work, I send you a message on FB (old message) because my english isn't so well and I know that you speak spanish too.
tomas.harispe said:
Fevax, do you think that is better this ROM or Resurrection Remix of Jesse I know that both are working together. I like more RR but I think maybe this will be more "stable" I know that isn't stable but I need to know what of both do you think is the one with the least bugs? Thank you so much for this fantastic work, I send you a message on FB (old message) because my english isn't so well and I know that you speak spanish too.
Click to expand...
Click to collapse
Two are the same, just different distribution, kernel/source/devtree are the same...
Wow
Sent from my SM-G935F using XDA-Developers mobile app
Fevax said:
Two are the same, just different distribution, kernel/source/devtree are the same...
Click to expand...
Click to collapse
Thank you so much! It's really good, I think the fast charging isn't working.
N modem and bootloader are required?
Really hopes this project succeds. The s7 edge feels slower than my years old nexus 5...
giorgior.r said:
N modem and bootloader are required?
Click to expand...
Click to collapse
No
tomas.harispe said:
Thank you so much! It's really good, I think the fast charging isn't working.
Click to expand...
Click to collapse
It's working, but not showing as qcharge
Fevax said:
No
Click to expand...
Click to collapse
Perfect thank you and compliment
Fevax said:
It's working, but not showing as qcharge
Click to expand...
Click to collapse
Oh it's okay, I saw that says "98% 16 minutes for complete charge" and I though that wasn't fast charging.
Incredible work so far Fevax!
Currently trying your 20161230 build and the improvements from yesterday's build are great - no crashes so far at all. I sideloaded gmscore, phonesky, googleloginservices, and googleservicesframework (which I took from @jesec's rom) to system/priv-app and it all seems to work fine with the stock gapps package. Packages are updating and I'm no longer getting any errors prompting for the framework to be installed.
So I guess I can confirm gapps to be working if you sideload those applications
Bugs:
> The SD can be read by certain apps for music and pictures, but cannot be read by file managers
> Headphone output is super quiet, phone speaker output is fine
> 3D rendering and general performance is mixed
> Otherwise, I can confirm that what you've listed above isn't working.
Interesting things:
> Enabling software buttons increased the framerate
Anonym00se said:
Incredible work so far Fevax!
Currently trying your 20161230 build and the improvements from yesterday's build are great - no crashes so far at all. I sideloaded gmscore, phonesky, googleloginservices, and googleservicesframework (which I took from @jesec's rom) to system/priv-app and it all seems to work fine with the stock gapps package. Packages are updating and I'm no longer getting any errors prompting for the framework to be installed.
So I guess I can confirm gapps to be working if you sideload those applications
Bugs:
> The SD can be read by certain apps for music and pictures, but cannot be read by file managers
> Headphone output is super quiet, phone speaker output is fine
> 3D rendering and general performance is mixed
> Otherwise, I can confirm that what you've listed above isn't working.
Interesting things:
> Enabling software buttons increased the framerate
Click to expand...
Click to collapse
agreed, and also like in RR 7.1.1 Youtube videos in 60FPS make the phone get really hot and battery drains incredibly fast. Also thoses videoa stutter or the image stop while sound continues.
I represent the modified stock firmware, based on the firmware 3.24.40.87 Zenfone 6 (Android 5.0), as well as Zenfone 2 / Zoom / Zenfone 3 ZS550KL (5.0, 6.0.1, 7.0) firmware. ROOT already integrated. Video review here:
Disclaimer: I remind you that everything you do on your fear and risk. I'm not responsible for the breakdown of devices, bricks caused by your own hands (well, my hands, too, it's true, software to kill iron is unlikely to come out)
How to install:1. Requires an unlocked bootloader and TWRP !!!
2. Install the firmware. Installation takes place quickly, about 1 minute. When installing the firmware, the most recent TWRP 3.0M5
Attention! The first start of the firmware after the wipes can reach 10-15 minutes.
Development is hard work. If you want to support not only beautiful words, my profile has information on how it can be done
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
0. Despite the fact that I tried to make firmware based on the most extreme firmware of android 5, where already the asus changed the theme engine and sawed out the possibility of changing the themes of the status bar and settings, I saved this opportunity!
1. Setup wizard, sound service, preset from Zenfone 2 and 3 (6.0.1, 7.0). In addition to the usual effects added "Pure" - when the headphones are inserted and "Outdoor" - for the external speaker. Asus Music the newest version 2.1.0.40, which modified to work on 5.0, in the code frameworks made the relevant edits, so that the asus music did not crash after every reboot of the phone, also from this player there is access to the equalizer (item Fine tuning) Sound in the headphones really cool
2. The kernel I modified with a lot of governors and optimizations, the Mass Storage mode, the fix of the stock core, which could not catch the network after the exit from the subway or cellars, fixes of the device hangs on charging, etc. Thanks @nheolinkin https://forum.xda-developers.com/zenfone-5/general/share-discussion-users-problems-unlock-t3629739
3. Curtain almost in the style of Zenfone 3 Android 7.0 with the corresponding icons therefrom, also an increased grid of 5x4 titles, the Android system icon and debugging from ydb from android 7, the icon of the system's graphical interface from android 6.0.1, reduced the minimum possible number of items for quick settings (Not counting the first line of the quickbox-quickbox) from 8 to 5
4. Extended reboot menu with items for quick reboot, reboot into bootloader and recovery + at the bottom of setting sound modes
5. Added a response to the call by applying the phone to your ear (Settings- ZenMotion- click on the text "Motion gestures" - the menu will open and you will place the appropriate checkboxes there). It does not work very well, it is necessary to apply it quite sharply to the ear, but it does work nonetheless. During the incoming call, hold the phone in front of you in your hand, bent at the elbow and along the arc, without bending the elbow, bring to the ear, there will be a pick-up
6. Start the camera by double pressing the volume buttons when the phone is sleeping and the screen is not lit (Settings-Lock Screen-Current Camera)
7. Advanced adjustment of screenshots (disabling / enabling the sound of the shutter, the format of screenshots). In the main Settings menu item "Screenshot"
8. Updated a bunch of services and applications to the extreme firmware of zenfon 2 5.0 2.20.40.198 and something borrowed from its own sewing zenfon 2 on 6.0.1
9. The menu of the recent applications as in 6.0.1 (flat)
10. Due to the lack of space in the system partition, massive sawing was necessary. The first thing, demolished the Asus Mobile Manager. This is the main evil, android himself is able to clean and programs know whether to auto-start them or not. If you think that if the asus mobile manager writes that 10000 applications were stopped by the autorun manager, then it does not mean that they all started, in fact, 10-15 pieces, and the rest did not work without the manager. In general, this rubbish with advertising and pictures, which only harms and eats. You can not try to put it from the market, write that the device is not supported
11. App powersaver and the modes themselves took from zenfon 2 and something under our devices adapted. Unlike some incomprehensible modes, they actually change something to the zenophon 5 and 6, for example, when switching from the performance mode to the optimal illumination of the screen, the brightness (inoutdoor mode) is slightly reduced and the frequency drops to 1600 MHz. And, in general, it is better to always use a productive mode, oddly enough, the battery holds better.
12. Accelerated update of the davick cache and it takes up less memory, however, there may be performance sagging the first minutes after reboots.
13. Full support for Asus Flip Cover 2
14. I borrowed the brightness levels of the display from Zenphon 2 and added a few to reduce the minimum manual and auto brightness
15. Firmware already rooted, built-in SuperSu
16 Modified ZenUI Launcher with autorotate homescreen, smooth scaling, extra font sizes, extra dock bar
16. Other, I forgot already what I added
Current known issues :
1. Randomly turn on camera led after wake screen with double tap/press power button. For turn off led should lock/unlock screen again
Folder with firmware on google disk. It is better to use browsers, and then clients cache rarely and slowly update. Link https://drive.google.com/drive/fold...ourcekey=0-9TEOq_YFjreiYYDaN7MFkA&usp=sharing
Kernel source here(github not working for me in present time): https://drive.google.com/file/d/0B4...=sharing&resourcekey=0-vhvAj-PYvx70_22cK7wHiA
XDA:DevDB Information
BORETS ROM, ROM for the Asus Zenfone 5
Contributors
BORETS24
Source Code: https://github.com/BORETS24/for-Zenfone-6-5.git
ROM OS Version: Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Need unlocking bootloader
Based On: Stock
Version Information
Status: Testing
Created 2017-07-13
Last Updated 2019-08-16
Successful install in my Zenfone 5, and root access is active. Audio wizard is running even i use Poweramp. So far so good.
Good work Borets
"You said something new could happen," I guess.
We are waiting for the success of the success!
I think the volume of zenfone features that piled up in this rom. 824mb wwwooow
I will test
I found three bugs:
1. Gallery crash. Solution- install gallery update from Google Play and other sources and clear data
2. Did not work Asus Contacts Dark theme, after reboot again light theme. Try to fix...
3. Powersave modes work incorrectly. very often max freq decrease to 1333 or 1600 MHz. Also try to fix
4.Camera closed when make photo
EDIT: Now everything looks fine.
Mustafa Can said:
I will test
Click to expand...
Click to collapse
We are expecting a worthy bout Mustafa
thanks kardeşim
Changelog BORETS ROM:
-Fixed:
*** 1. Camera outage when taking photos
*** 2. Crash Gallery
*** 3. Flattened quick settings panel icons (replaced by others)
***4. Power saving modes (like the higher the maximum frequency does not drop to 1333 MHz)
- Decreased DPI by default from 320 to 300
- even deleted the application (Asus Backup, ShareLink, etc.), well, there is a catastrophic lack of space in the system partition
zenfone 5?
---------- Post added at 01:37 AM ---------- Previous post was at 01:23 AM ----------
Potoyskee said:
Successful install in my Zenfone 5, and root access is active. Audio wizard is running even i use Poweramp. So far so good.
Click to expand...
Click to collapse
how did you flash?
jhephoy said:
zenfone 5?
---------- Post added at 01:37 AM ---------- Previous post was at 01:23 AM ----------
how did you flash?
Click to expand...
Click to collapse
By using twrp 3.0.M5-0,
1. advance wipe select dalvik,system,cache, and data
2.wipe format data then type YES
3. Reboot to recovery again
4. install zip file BORETS24.
Bug report.
Front cam have blur in left of the screen if you take video.
Potoyskee said:
Bug report.
Front cam have blur in left of the screen if you take video.
Click to expand...
Click to collapse
Confirm. But if you switch video resolution from FullHD to HD for front camera - blur will not. I changed codecs and camera config and don't remember, stock have FullHD for front camera or not?
BORETS24 said:
Confirm. But if you switch video resolution from FullHD to HD for front camera - blur will not. I changed codecs and camera config and don't remember, stock have FullHD for front camera or not?
Click to expand...
Click to collapse
no it doesnt... stock only have HD and TV quality for front camera
sorry. Borets Kernel work for CM12.0 ??? [5.0.2]
ShOgYzzz said:
sorry. Borets Kernel work for CM12.0 ??? [5.0.2]
Click to expand...
Click to collapse
No, kernel only for stock based Lolipop ROMs
BORETS ROM_1.1 [/ B]
-now the LED notifies about events even when on charging
-Now 25 levels of multimedia volume instead of 15
Fixed:
-release from the point "Special abilities" when trying to put something there
- the disabled mode of video shooting FullHD for the front camera (which in a stock was never)
BORETS24 said:
BORETS ROM_1.1 [/ B]
-now the LED notifies about events even when on charging
-Now 25 levels of multimedia volume instead of 15
Fixed:
-release from the point "Special abilities" when trying to put something there
- the disabled mode of video shooting FullHD for the front camera (which in a stock was never)
Click to expand...
Click to collapse
Sorry. i think this thread is Kernel.
BORETS24 said:
BORETS ROM_1.1 [/ B]
-now the LED notifies about events even when on charging
-Now 25 levels of multimedia volume instead of 15
Fixed:
-release from the point "Special abilities" when trying to put something there
- the disabled mode of video shooting FullHD for the front camera (which in a stock was never)
Click to expand...
Click to collapse
I had problems logging into facebook on the previous version. Is it fixed in this?
Very good work!
:good:
the.password said:
I had problems logging into facebook on the previous version. Is it fixed in this?
Very good work!
:good:
Click to expand...
Click to collapse
It is not my fault. It is facebook fault and your fault too. For correct facebook work you need use x86 versions! From Google Play facebook present to us ARM version here normal versions for x86 https://www.apkmirror.com/apk/facebook-2/facebook/variant-%7B%22arches_slug%22%3A%5B%22x86%22%5D%7D/
Borets; Do not you think roms thinning? For example, gapps pico and other unnecessary
Before we start, this is NOT MY rom! I'm just sharing it here because I managed to successfully port it to our device, all Thanks and donations should go to "Chinese" He created this sGSI.
Check screenshots in attached files!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What works:
WiFi
Calls
Microphone
Vibrations
Dual SIM
Sound
Fingerprint scanner
Camera + Flashlight
Notification LED
Probably even more, just haven't tested everything yet.
What doesn't work/Bugs:
Brightness is always 100% (Someone contact OP and tell them to change vendor or kernel stuff to work with different amount of brightness levels)
Stock keyboard shows some Chinese popup and it's difficult to type on it so just install Gboard instead.
USB MTP seems kinda buggy. (Might be because of my unstable linux, OOS sometimes doesn't work either so not sure if You'll get this bug too)
NFC is constantly turning on and off.
If anyone wants, You can change brightness with terminal command that You can find in my Pixel 3XL Port Thread.
How to Install:
Flash Stock OOS Oreo in TWRP (preferably twice)
Boot into fastboot and use my rom flasher. It will do everything automatically. (Just run bat file and that's it!)
Boot into TWRP (Yes, You need TWRP that works with Oreo so go to twrp.me and get 3.2.2.0 version)
Mount Vendor
Flash Patch1 in TWRP (Don't flash Patch2, I accidentally added it to the zip, just leave it alone.)
### OPTIONAL ###
Flash Magisk
Flash OpenGapps
#############
Done! Reboot and enjoy!
Also, during setup, use Your sim card internet to go through setup. Once the phone boots look in the left upper corner for "English" tap on it and have fun!
Download:
ZUI 10 Port for OnePlus 6 Flasher
Credits
Chinese guy(no xda username?)
JSPiRiT
Lenovo
First
Thanks. Old school screenshots
Is this some modded MIUI thing?
GAURAV THAKKAR said:
Is this some modded MIUI thing?
Click to expand...
Click to collapse
Nope. It's ZUI. Lenovo's own rom that looks kinda similar to MIUI.
I will publish more ports today. Early Christmas!
ProtoDeVNan0 said:
Nope. It's ZUI. Lenovo's own rom that looks kinda similar to MIUI.
I will publish more ports today. Early Christmas!
Click to expand...
Click to collapse
Make miui 10 port plz
ProtoDeVNan0 said:
Nope. It's ZUI. Lenovo's own rom that looks kinda similar to MIUI.
I will publish more ports today. Early Christmas!
Click to expand...
Click to collapse
I'd really appreciate if you manage to get the Pixel 3 bugs fixed
I don't mind you posting so many ports(I encourage it)
But I guess you should also try to solve issues
Just a humble suggestion
Would really love to use the Pixel 3XL port
hkee96 said:
Make miui 10 port plz
Click to expand...
Click to collapse
Working on it!
GAURAV THAKKAR said:
I'd really appreciate if you manage to get the Pixel 3 bugs fixed
I don't mind you posting so many ports(I encourage it)
But I guess you should also try to solve issues
Just a humble suggestion
Would really love to use the Pixel 3XL port
Click to expand...
Click to collapse
Well.. One bug has to be fixed by OnePlus. Brightness.. Only OP6 uses 1023 levels of brightness and that's why this bug exists in all sGSI roms. If they could release OTA with modded brightness levels to match other devices, it would be a lot better. Otherwise I'll have to try modding framework (yes, it's finally possible) but it's very difficult. I'm not a big fan of smali.. (Just google smali and You'll know what I mean)
Edit: I'm also focusing on Pixel 3 XL Port less because You can have almost 1:1 Pixel 3 XL rom with Havoc OS for example. And everything works there.
brightness at max all the time? i think i will pass for now.
but great job porting this, looking forward to more of your ports <3
1.wifi not turning on,
2.display not showing once device is locked for sometime,
3.camera is nearly good but for front camera device ask to slide down to use camera,
4.no sound
5.alert slider not working,
6.incoming call mic not working via speaker too,
these are bugs what i have found on my device
i followed every steps what u have mentioned
and i appreciate 4r ur hardwork for bringing such amazing rom
riazsudeen said:
1.wifi not turning on,
2.display not showing once device is locked for sometime,
3.camera is nearly good but for front camera device ask to slide down to use camera,
4.no sound
5.alert slider not working,
6.incoming call mic not working via speaker too,
these are bugs what i have found on my device
i followed every steps what u have mentioned
and i appreciate 4r ur hardwork for bringing such amazing rom
Click to expand...
Click to collapse
Hmm. Here WiFi and Sound works fine.. did You use 5.1.11 firmware? I already noticed that OP6 is a pretty complicated phone. It's like every OP6 has different bugs . On my phone the only bugs that I have are NFC is restarting all the time, Camera Dual Mode doesn't work, Brightness is 100% and stock keyboard requires long presses to type on it.
ProtoDeVNan0 said:
Hmm. Here WiFi and Sound works fine.. did You use 5.1.11 firmware? I already noticed that OP6 is a pretty complicated phone. It's like every OP6 has different bugs . On my phone the only bugs that I have are NFC is restarting all the time, Camera Dual Mode doesn't work, Brightness is 100% and stock keyboard requires long presses to type on it.
Click to expand...
Click to collapse
Nfc, Brightness, camera bug is similar what u experienced, and i flashed 5.1.11 twice before porting, but screen not responsive while charging and while its not charging it goes deep sleep
but i like this rom more.. u take ur own time to make this rom stable:good:
Issues experienced so far (including known);
- NFC service keeps rebooting(? dropdown icon flickering)
- Brightness slider not working, automatic brightness keeps re-enabling itself
- Night light not working
- Can't change any color tone
- Occasionally, unlocking the phone will keep the fingerprint icon centered after unlocking, preventing the phone from locking at all.
I tried disabling the NFC service entirely, by blocking com.android.nfc and disabling the service via
Code:
svc nfc disable
This didn't solve it sadly. Since you're not the developer, idk how much bugfixing you're doing, but the rom as is looks really promising.
Just doesn't cut it just yet as daily driver (IMO)
Really looking forward to your MIUI port!
riazsudeen said:
Nfc, Brightness, camera bug is similar what u experienced, and i flashed 5.1.11 twice before porting, but screen not responsive while charging and while its not charging it goes deep sleep
but i like this rom more.. u take ur own time to make this rom stable:good:
Click to expand...
Click to collapse
Skorm92 said:
Issues experienced so far (including known);
- NFC service keeps rebooting(? dropdown icon flickering)
- Brightness slider not working, automatic brightness keeps re-enabling itself
- Night light not working
- Can't change any color tone
- Occasionally, unlocking the phone will keep the fingerprint icon centered after unlocking, preventing the phone from locking at all.
I tried disabling the NFC service entirely, by blocking com.android.nfc and disabling the service via
Code:
svc nfc disable
This didn't solve it sadly. Since you're not the developer, idk how much bugfixing you're doing, but the rom as is looks really promising.
Just doesn't cut it just yet as daily driver (IMO)
Really looking forward to your MIUI port!
Click to expand...
Click to collapse
I think I know how to fix NFC but since it's not my rom.. I'm not sure if I can work on it. I'm pretty much just sharing it here. I just converted it to A/B and made sure that kernel will boot it etc.
If someone can send me stock Lenovo Z5 firmware. I can turn it into a sGSI and work on fixing bugs.
And Brightness bug will be always there anyway. Unless OnePlus will change amount of Brightness levels in their firmware.
can u port funtouch os pie?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Google Camera Mods Hub
Nokia 6.1 Plus
features working:
- Camera (HDR+, Night Sight, etc.)
- Video (4k30fps, Stabilization, 1080p30fps, 60fps w/ stabilization isn't tested yet.)
- Panorama
- Photo Sphere
- Potrait and etc.
Google Camera Download Hub: https://www.celsoazevedo.com/files/android/google-camera/
Currently tested on my device (TA-1116)
MGC_6.1.021_BSG_Arnova-based_v.1.4_TlnNeun.apk (Tolyan009, 2019-02-14 changelog)
Preview Images
Known Issues:
- All working normal and flawlessly.
- Viewfinder aren't laggy. (normal)
- Image quality is way better than past version.
- Night sight is better.
- I did not tested slow motion mode, yet.
(Sorry for slow updates, I'm pretty busy with my college lately...)
Click to expand...
Click to collapse
Old reviews
MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun_2.apk (Arnova8G2, 2018-12-30 changelog)
Known Issues:
- Viewfinder a little bit laggy, but still working like normal.
- Night sight working flawlessly but the viewfinder is so laggy it almost unusable. (You can shot like normal, but it won't preview on the viewfinder)
Click to expand...
Click to collapse
I'll only test Arnova8G2's version (and it derivatives). If you experience different issues than mine, or you want to test another dev gcam, feel free to share. I'll add both your issues and other dev gcam issues here.
CStark27 NoHex GCam port Review by SnapDrag910
back.rider gcam review by VRDemon
I don't have Nokia 6.1 Plus anymore because the USB port is broken. And after I claim the warranty, I gave it to my dad. (because the official service center takes too long to fix it.)
Will still maintain this thread for some periods tho, but i will not make any new review.
Recommended version (most stable)
Tolyan's 1.4: MGC_6.1.021_BSG_Arnova-based_v.1.4_TlnNeun.apk (Tolyan009, 2019-02-14)
MGC_6.1.021_xcam_5_beta19.apk (xtrme, 2019-02-15) [Haven't tested but some members said it's good)
Latest version (not tested)
Arnova's Advanced 1.5: GCam_6.1.021_Advanced_V1.5.190418.1850.apk (Arnova8G2, 2019-04-18)
MGC_6.2.024_BSG_Arnova-based_v.0.2_TlnNeun.apk (Tolyan009, 2019-04-12)
Google Camera Settings
coming soon.
Will it support slow motion also?
It was working good till yesterday but now its crashing in normal camera mode but works fine in nightsight and other modes. Any solutions?? Tried reinstall and clear cache.
Portrait mode missing some time after clear cache and storage it's show..
When flash on shutter speed slow..
Night sights is not good for the other version (6.1.013)
Do you guys use any custom settings or you leave the arnova defaults?
jojlse said:
Do you guys use any custom settings or you leave the arnova defaults?
Click to expand...
Click to collapse
Leave the arnova defaults
Which is the best g came for Nokia 6.1 plus
jojlse said:
Do you guys use any custom settings or you leave the arnova defaults?
Click to expand...
Click to collapse
arnova default for now. (also don't forget to use Settings > Advanced > FIX > Pixel III AWB. if you use v1.4 by TinNeun)
suraj754 said:
Which is the best g came for Nokia 6.1 plus
Click to expand...
Click to collapse
This latest one
Kamaendu Maity said:
Portrait mode missing some time after clear cache and storage it's show..
When flash on shutter speed slow..
Night sights is not good for the other version (6.1.013)
Click to expand...
Click to collapse
Try the latest one. And see if your problem persist.
lathif106 said:
Will it support slow motion also?
Click to expand...
Click to collapse
Based from the changelog, it will on some devices. I did not tested the slow motion yet on Nokia 6.1 Plus. Let's just wait for the dev (especially Tolyan009) to fix things out.
Fritzkier said:
arnova default for now. (also don't forget to use Settings > Advanced > FIX > Pixel III AWB. if you use v1.4 by TinNeun)
This latest one
Try the latest one. And see if your problem persist.
Click to expand...
Click to collapse
Face quality not good ...
Night sight not Good
6.1.0.13 is best
Anyone tried latest one.
I have also tried nokia7plus version. Viewfinder hangs on night mode
Is any developer there who can develop pixel 3 camera in accordance with our Nokia 6 .1 plus.
Since 6.1.0.13, no other app has been stable n give good pics.
The latest one by back.rider (optimized for Nokia 7 Plus) is actually stable enough to use as daily driver.
My Observation -
Detail is way more than what Nokia camera captures.
Device heat is more contained.
App by back.rider issue
Screen goes black on night sight mode
CStark27 NoHex GCam port
This is a GCam port by cstark27 that i use as a daily driver on my phone.
Everything works including night sight(which BTW works frickin flawless):fingers-crossed:
Since, this a NoHex target port, the camera has some optimisation to reduce the usage of the SoC which means, lesser heat and lesser battery usage than other ports.
The in-app animations also feel significantly smoother than the other ports(subjective).
It is stable enough for MY daily use cases. But i don't know about you. You test and see for yourselves if it fits the bill
The 2 cons that I face -
The AF data/Info cannot be removed from the screen yet. It isn't a biggie as it takes only a very small space on the viewfinder and is barely visible when clicking photos.
It needs a few tweaks from the user's side to unleash the full potential of the camera(I'll post the tweaks i've done, if theres interest in this port)
Pls tell ur tweak.
BTW i am using arnovag2 recent camera apk. Its good. But it has slight reddish tint on night pics
SnapDrag910 said:
CStark27 NoHex GCam port
This is a GCam port by cstark27 that i use as a daily driver on my phone.
Everything works including night sight(which BTW works frickin flawless):fingers-crossed:
Since, this a NoHex target port, the camera has some optimisation to reduce the usage of the SoC which means, lesser heat and lesser battery usage than other ports.
The in-app animations also feel significantly smoother than the other ports(subjective).
It is stable enough for MY daily use cases. But i don't know about you. You test and see for yourselves if it fits the bill
The 2 cons that I face -
The AF data/Info cannot be removed from the screen yet. It isn't a biggie as it takes only a very small space on the viewfinder and is barely visible when clicking photos.
It needs a few tweaks from the user's side to unleash the full potential of the camera(I'll post the tweaks i've done, if theres interest in this port)
Click to expand...
Click to collapse
I'm interested too!
SnapDrag910 said:
CStark27 NoHex GCam port
This is a GCam port by cstark27 that i use as a daily driver on my phone.
Everything works including night sight(which BTW works frickin flawless):fingers-crossed:
Since, this a NoHex target port, the camera has some optimisation to reduce the usage of the SoC which means, lesser heat and lesser battery usage than other ports.
The in-app animations also feel significantly smoother than the other ports(subjective).
It is stable enough for MY daily use cases. But i don't know about you. You test and see for yourselves if it fits the bill
The 2 cons that I face -
The AF data/Info cannot be removed from the screen yet. It isn't a biggie as it takes only a very small space on the viewfinder and is barely visible when clicking photos.
It needs a few tweaks from the user's side to unleash the full potential of the camera(I'll post the tweaks i've done, if theres interest in this port)
Click to expand...
Click to collapse
What tweaks did your make?
navtab said:
Pls tell ur tweak.
BTW i am using arnovag2 recent camera apk. Its good. But it has slight reddish tint on night pics
Click to expand...
Click to collapse
giardux91 said:
I'm interested too!
Click to expand...
Click to collapse
Jugal28 said:
What tweaks did your make?
Click to expand...
Click to collapse
Open Camera, go to settings, Noise Reduction
Activate both Front and Rear Camera and click on Noise Model
And change noise models on both camera -
Code:
[b]Change this for both front and back camera[/b]
Custom Sensor Noise offset a - 1125
Custom Sensor Noise offset b - 11250
Custom Sensor Noise scale a - 1694300(default)
Custom Sensor Noise scale b - 90900(default)
Change libs to Xlib V2 Increased Sharpness
And now go to adavnced and change these settings -
•HDR+ Base Configuration - Pixel2017 ZSL HDR+
•Turn on alternative config for Night Sight(Flash Availabilty)
•Enable Remove Zoom
Thats it. Now you'll get noticably sharper photos.
All my google camera modifications are here
Made for Razer Phone 2, Tested on firmware O-MR2-RC009-RZR-181124.2009
Latest google camera version:
Minimum settings - maximum "automatics"...
MGC_6.1.021_RazerPhone2_V1c: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1351/
Changelog:
V1:
- in the photo part, everything works, the video mode was not engaged ...
V1a:
- removed the bright flash at the beginning of the shooting video
V1b:
- added AWB Correction to NS (Night Sight)
V1c:
- fixed the launch by double pressing the "Power" button
- increased photo resolution in "Lens Blur" mode (at RP2 back=12MP, front=7MP)
MGC_6.1.021_RazerPhone2_V2a: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1350/
Changelog:
V2a:
- minor changes to correct work on Android 9.0
Made for Razer Phone 2, Tested on firmware P-MR1-RC003-RZR-190305.3110
MGC_6.2.024_RazerPhone2_V1d: https://www.celsoazevedo.com/files/android/google-camera/f/changelog442/
Changelog:
Only android 9.0
V1: https://drive.google.com/open?id=1eNTZgE8MBdwFqWa-DGhpevF9ixwt21XD
- init release
V1a: https://drive.google.com/open?id=1at8iINjc7KCV2zihpLGidESik0oagTrq
- correct exif
V1b: https://drive.google.com/open?id=18siv28p5DWZMbhtpncbrZ9BLY93ah8iB
- minor changes ...
V1d:
- added Gcam AWB (included in the settings)
MGC_6.2.030_RazerPhone2_V5: https://www.celsoazevedo.com/files/android/google-camera/f/changelog562/
Changelog:
Only android 9.0
V1: https://drive.google.com/open?id=1id-Y9gZyHE8bf5qg2o1-rHHDig1aKPmQ
- changes are the same as in MGC_6.2.024_RazerPhone2_V1d
V2:https://drive.google.com/open?id=17F3DGX-OqTHGjtXNjuWZ3fCKIXUKGDCj
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
V3: https://drive.google.com/open?id=1RPTKeZtiMUj0405ScKB8CtXzZTCCj4Cp
- added slow-mo (120 \ 240)
- changed the algorithm of work of hdr +, there should be better details (probably ...)
V4: https://drive.google.com/open?id=1rAgBKJ9ZixrsfP2_29HHJabm-2g9etLY
- added 60 fps to the back camera video mode.
V5:
- various minor changes / corrections.
Final version.
MGC_7.0.009_MiIXSE.RPII.MiVIII_V1b: https://www.celsoazevedo.com/files/android/google-camera/f/changelog745/
Changelog:
Only android 9.0+
V0: https://drive.google.com/open?id=1F5uUzF1YMzPjGjG1OAom7Dw0HEcKZsG8
- init version(test)
V1: https://drive.google.com/open?id=1JyFyjnl0QXa2rIditAuvfmdzxc0vbBBX
- various changes and corrections...
V1a: https://drive.google.com/open?id=1SFhqSWzw9vAcJKuXoumCAUMz5tmlgc-w
- fixed errors in V1
V1b:
- fixed errors
MGC_7.2.018_RPII.MiVIII_V0b: https://www.celsoazevedo.com/files/android/google-camera/f/changelog909/
Changelog:
Only android 9.0+
Razer Phone 2 and MI8 only
V0: https://drive.google.com/open?id=13f79-D5lNk2HNEYPDiX11UK1EdzfatQq
- init version(test)
V0b:
- fixed some errors
(MI9SE support will be in future versions.)
Older version of google camera:
many settings ...
MGC_3.2.045_RazerPhone2_V1: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1352/ (clone: https://drive.google.com/open?id=1OGFgap9dRWrhOUxlrPYgoAtSgTn8rNDO)
Changelog:
V1:
- in the photo part, everything works, the video mode was not engaged ...
My settings for MGC3.2:
bsg19071979 said:
Made for Razer Phone 2, Tested on firmware O-MR2-RC009-RZR-181124.2009
Latest google camera version:
Minimum settings - maximum "automatics"...
MGC_6.1.021_RazerPhone2_V1: https://drive.google.com/open?id=109ZzlIcoaN2at9G5FBmKH85lKG0LWLPW
Older version of google camera:
many settings ...
MGC_3.2.045_RazerPhone2_V1: https://drive.google.com/open?id=1ufDZ9b8P0LtQwyt0oHddggPuXvegzHZj
In the photo part, everything works, the video mode was not engaged ...
Click to expand...
Click to collapse
Awesome man! Thank you for posting. I'll give it a try today.
Is there a reason none of the gcams so far have working slow motion video? I find it hard to believe that the hardware on this phone is incapable of slow motion... And this version removes the option all together...anyone know why? Can we get a working version with slow motion? I really miss that feature. Found it VERY handy when troubleshooting fast moving machinery at work.
mmfnsmith said:
Is there a reason none of the gcams so far have working slow motion video? I find it hard to believe that the hardware on this phone is incapable of slow motion... And this version removes the option all together...anyone know why? Can we get a working version with slow motion? I really miss that feature. Found it VERY handy when troubleshooting fast moving machinery at work.
Click to expand...
Click to collapse
I can't make it work on 8.1 yet...
On the MGC_6.1.021_RazerPhone2_V1a version, if I use the double-click side button shortcut to start Gcam, normal camera mode does not save images after capturing them. Switching camera mode works around this issue, but is inconvenient.
If I start Gcam normally from the app drawer, the camera mode saves images as usual.
Can you reproduce this issue?
Nomyth said:
On the MGC_6.1.021_RazerPhone2_V1a version, if I use the double-click side button shortcut to start Gcam, normal camera mode does not save images after capturing them. Switching camera mode works around this issue, but is inconvenient.
If I start Gcam normally from the app drawer, the camera mode saves images as usual.
Can you reproduce this issue?
Click to expand...
Click to collapse
When you call a Google camera from another application or the power button hdr + does not work.
fixed in "V1c" ...
Perfect, works great!
Will you consider adding telephoto lens toggle similar to other Gcam branches?
Nomyth said:
Perfect, works great!
Will you consider adding telephoto lens toggle similar to other Gcam branches?
Click to expand...
Click to collapse
If add it so that it works without fixing build.prop then the Google lens will not work.
Abousltely beast. Salute my man.
I tried installing this apk but i get the "app not installed" when i try to install it. Anybody have an idea what it could be?
EDIT: Nvm, I did not uninstall an older version of the app. Now that i did, it installs fine.
bsg19071979 said:
If add it so that it works without fixing build.prop then the Google lens will not work.
Click to expand...
Click to collapse
Possible to do one version with the aux camera but without Google lens? Or you are working on a fix on this?
Speedknight said:
Possible to do one version with the aux camera but without Google lens? Or you are working on a fix on this?
Click to expand...
Click to collapse
Aux lens has less light sensitivity, it has no stabilization, so it makes the photo under any conditions worse than the main lens. aux lens is not needed ...
Any way to get this updated with the 60fps video recording?
So I downloaded and installed the new version today. The camera is much, much faster, but it crashes every time I try to take a video. Is there some combination of settings causing this?
Edit: I changed the interface style (in the mod menu) from Pixel III to Pixel II, and video now works! However there is now a bright flash at the beginning of the video that is actually captured in the footage.
For android 9.0 need to do it all over again. It will take some time.
bsg19071979 said:
For android 9.0 need to do it all over again. It will take some time.
Click to expand...
Click to collapse
Are you planning on working on it?
jal3223 said:
Are you planning on working on it?
Click to expand...
Click to collapse
I don’t know yet ... There will definitely be tracking focus in video mode (example: https://drive.google.com/open?id=10AGDx3aDS0Bue7lv1Ql1eMw4DEhQr21h) and there will definitely not be slow-mo, since the CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES key will give a maximum of 30 fps for Android 9.0, and for slow-mo need 120fps.
bsg19071979 said:
I don’t know yet ... There will definitely be tracking focus in video mode (example: https://drive.google.com/open?id=10AGDx3aDS0Bue7lv1Ql1eMw4DEhQr21h) and there will definitely not be slow-mo, since the CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES key will give a maximum of 30 fps for Android 9.0, and for slow-mo need 120fps.
Click to expand...
Click to collapse
Either way, without your work I'd have returned the phone the day after I bought it. So thanks again!
Would love a Pie version as well. Just ordered the phone with the price drop and camera is one thing that's lacking
Hopefully there is continued development. I just bought my wife this phone coming from the s8+. Can you add a TIMELAPSE option? She used that a lot. Thanks.